Thick Film Chip Resistors / Low Resistance Type ERJ R, B : 0402, 0603, 0805, 1206, 1210, 1812, 2512 ERJ L : 0603, 0805, 1206, 1210, 1812, 2010, 2512
|
|
- Blanche Bishop
- 7 years ago
- Views:
Transcription
1 Thick Film Chip esistors / Low esistance Type Thick Film Chip esistors / Low esistance Type EJ, B : 040, 0603, 0805, 106, 110, 181, 51 EJ L : 0603, 0805, 106, 110, 181, 010, 51 Type: EJ B, 3, 3B, 6, 6B, 8, 8B, 14, 14B, 1, 1T EJ L03, L06, L08, L14, L1, L1D, L1W n Features l Small size and lightweight For PCB size reduction and lightweight products l High reliability Metal glaze thick film resistive element and three layers of electrodes result in high reliability l Solderability Suitable for both reflow soldering and flow soldering l Low esistance Value B Type : 0.1 W to 1.0 W 3, 3B, 6, 6B, 8, 8B, 14, 14B, 1, 1T Type : 0.1 W to 9.1 W L03, L06, L08 Type : 47 mw to 100 mw L14, L1 Type : 0 mw to 100 mw L1D, L1W Type : 40 mw to 100 mw l eference Standards IEC , JIS C n Explanation of Part Numbers (B, 3, 3B, 6, 6B, 8, 8B, 14, 14B, 1, 1T Type) E J 8 Q F V Product Code Thick Film Chip esistors Size, Power ating Type: inches Power. B : W 3 : W 3B : W 6 : W 6B : W 8 : W 8B : W 14 : W 14B : W 1 : W 1T : 51 1W esistance Value Code es. VAlue S Q 0.1 W to 0. W 0. W to 9.1 W ] ] B : 0. W to 1.0 W esistance Tolerance Code Tolerance F ±1% G ±% J ±5% esistance Value It shows by 3 digits figure or alphabet. (Ex.) : 0. W Packaging Methods Code Packaging Punched Carrier Taping X mm pitch (B) Punched Carrier Taping V (3, 3B, 6, 6B, 8, 8B) Embossed Carrier Taping U (14, 14B, 1, 1T)
2 n Explanation of Part Numbers (L03, L06, L08, L14, L1, L1D, L1W Type) Thick Film Chip esistors / Low esistance Type E J L 1 4 K J 5 0 M U Product Code Thick Film Chip esistors Size, Power ating Type: inches Power. L03 : W L06 : W L08 : W L14 : W L1 : W L1D : W L1W : 51 1W Code es. Value Std. K 0 mw, mw, 33mW, ( ) ] 39 mw, 47mW, 50mW, 100 mw U 0 mw to 100 mw] ] L03, L06, L08 : 47 mw to 100 mw L1W:40mW to 100 mw esistance Tolerance Code Tolerance F ± 1% J ± 5% esistance Value It shows by 3 digits figure or alphabet. (Ex.) 50 M:50 mw, 10 C:100 mw Packaging Methods Code Packaging Punched Carrier Taping V (L03, L06, L08) Embossed Carrier Taping U (L14, L1, L1D, L1W) n Construction n Dimensions in mm (not to scale) a L Protective coating W Alumina substrate Electrode (Inner) t Thick film resistive element Electrode (Between) Electrode (Outer) b Type Dimensions (mm) Mass(Weight) (inches) L W a b t [g/1000 pcs.] EJB (040) 1.00 ± Ð ± ± ± EJ3 EJ3B (0603) 1.60 ± Ð ± ± ±0.10 EJL03 EJ6 EJ6B (0805).00 ± ± ± ± ± EJL06 EJ8 Ð0.0 Ð0.15 EJ8B (106) ± ± ± EJL08 EJ14 EJ14B (110) 3.0 ± ± ± ± ± EJL14 EJ1 EJL1 (181) 4.50± ± ± ± ± EJL1D (010) 5.00 ± ± ± ± ± EJ1T 6.40 ± ± ± ± ± EJL1W (51) 6.40 ± ± ± ± ±
3 n atings <Low resistance type> EJL03 (0603) EJL06 (0805) EJL08 (106) <High power type> Power ating at 70 C 0.1 esistance Tolerance (%) Thick Film Chip esistors / Low esistance Type esistance ange T.C.. [ 10 Ð6 /ûc (ppm/ C)] Category Temperature ange (Operating Temperature ange) ( C) (0.) ]1 ±1, ±5 47 m to 100 m ] ± (0.5) ]1 ±1, ±5 47 m to 100 m ] ± (0.33) ]1 ±1, ±5 47 m to 100 m ] ±100 EJL14 (110) 0.33 ±1, ±5 0 m to 100 m ] EJL1 (181) 0.5 ±1, ±5 0 m to 100 m ] <47 mw:±300 EJL1D (010) 0.5 ±1, ±5 40 m to 100 m ] >47 mw:±100 EJL1W (51) 1 ±1, ±5 40 m to 100 m ] ]1 Please ask us when resistors guaranteed high power are needed. ] Standard.V. : 0 mw, mw, 33 mw, 39 mw, 47 mw, 50 mw, 100 mw, Custom.V. : Each 1 mw within upper range. Power ating esistance esistance T.C.. Category Temperature ange at 70 C Tolerance ange (Operating Temperature ange) (%) [ 10 Ð6 /ûc (ppm/ C)] ( C) EJBS (040) ±, ± to 0.0 (E4) ±300 EJBQ (040) 0.15 ±1, ±, ±5 0. to 1.0 (E4) ±50 EJ3BS (0603) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ3BQ (0603) EJ6BS (0805) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ6BQ (0805) EJ8BS (106) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ8BQ (106) EJ14BS (110) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ14BQ (110) 1.0 to 9.1 (E4) ±100 <Standard type> Power ating esistance esistance T.C.. Category Temperature ange at 70 C Tolerance ange (Operating Temperature ange) (%) [ 10 Ð6 /ûc (ppm/ C)] ( C) EJ3S (0603) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ3Q (0603) EJ6S (0805) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ6Q (0805) EJ8S (106) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ8Q (106) EJ14S (110) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ14Q (110) 1.0 to 9.1 (E4) ±100 EJ1S (181) 0.10 to 0.0 (E4) ± ±1, ±, ±5 0. to 0.91 (E4) EJ1Q (181) 1.0 to 9.1 (E4) ±100 EJ1TS (51) 0.10 to 0.0 (E4) ±00 1 ±1, ±, ±5 0. to 0.91 (E4) EJ1TQ (51) 1.0 to 9.1 (E4) ±100
4 Thick Film Chip esistors / Low esistance Type Power Derating Curve For resistors operated in ambient temperatures above 70 C, power rating shall be derated in accordance with the right figure. ated Load (%) Ð55 C 70 C Ð60 15 C Ð40 Ð n Packaging Methods (Taping) l Standard Quantity Ambient Temperature ( C) Type Kind of Taping Pitch (P1) Quantity EJB mm pcs./reel EJ3, 3B, L03 EJ6, 6B, L06 Punched Carrier Taping EJ8, 8B, L pcs./reel EJ14, 14B, L14 4 mm EJ1, L1 EJL1D Embossed Carrier Taping EJ1T 4000 pcs./reel EJL1W 3000 pcs./reel l Carrier Tape (Unit : mm) Punched Carrier Embossed Carrier fd 0 P 1 P P 0 B W F E T T A P 1 ( mm pitch) fd 1 (Only Emboss) Type A B W F E P 1 P P 0 fd 0 T fd 1 EJB 0.70 ± ± ± ±0.05 _ EJ3,3B,L ± ± ±0.05 _ EJ6,6B,L ± ± ± ± ±0.05 _ EJ8,8B,L08.00 ± ±0.0 _ EJ14,14B,L14.80 ± ± ± ± ± ± ± EJ1,L ± ±0.0 EJL1D.80 ± ± ±0.10 EJ1T 3.60 ± ± ± ± min. EJL1W 3.60 ± ± ±0.10 l Taping eel fa fc T W fb (Unit : mm) Type fa fb fc W T EJB EJ3,3B,L03 EJ6,6B,L ± ±1.0 EJ8,8B,L08 EJ14,14B,L min ±1.0 EJ1,L1 EJL1D EJ1T 13.0 ± ±.0 EJL1W
5 Thick Film Chip esistors / Low esistance Type n ecommended Land Pattern In the case of flow soldering, the land width must be smaller than the Chip esistor width to control the solder amount properly. Generally, the land width should be 0.7 to 0.8 times of the width of chip resistor. In the case of reflow soldering, solder amount can be adjusted, therefor the land width should be set to 1.0 to 1.3 times chip resistor width. a b Chip esistor c Dimensions (mm) a b c EJB (040) 0.5 to to to 0.6 EJ3, 3B, L03 (0603) 0.7 to 0.9 to. 0.8 to 1 EJ6, 6B, L06 (0805) 1 to to to 1.4 EJ8, 8B, L08 (106) to to 5 1. to 1.8 EJ14, 14B, L14 (110) to to to.8 EJ1, L1 (181) 3.3 to to to 3.5 EJL1D (010) 3.6 to 4 6. to to.8 EJ1T (51) 5 to to to 3.5 EJL1W (51) 3.6 to to to 3.5 n ecommended Soldering Conditions ecommendations and precautions are described below. l ecommended soldering conditions for reflow áeflow soldering shall be two times maximum. áplease contact us for additional information when you use in conditions other than those specified. áplease measure a temperature of terminations and study solderability every kind of solder and board, before actual use. Temperature Peak Preheating Heating For solder (Example : Sn/Pb) Temperature Time Preheating 140 C to 160 C 60 s to 10 s Main heating Above 00 C 30 s to 40 s Peak 35 ± 5 C max. 10 s For lead-free solder (Example : Sn/Ag/Cu) Temperature Time Preheating 150 C to 180 C 60 s to 10 s Main heating Above 30 C 30 s to 40 s Peak max. 60 C max. 10 s Time l ecommended soldering conditions for flow For solder For lead-free solder Temperature Time Temperature Time Preheating 140 C to 160 C 60 s to 10 s 150 C to 180 C 60 s to 10 s Soldering 45±5 C 0 s to 30 s max. 60 C max. 10 s Cautions for Safety The following are precautions for individual products. Please also refer to the precautions common to Fixed esistors shown on page E3 of this catalog. 1. Take measures against mechanical stress during and after mounting of Thick Film Chip esistors (hereafter called the esistors) so as not to damage their electrodes and protective coatings.. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the esistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the esistors may be impaired. 3. Do not use halogen-based or other high-activity flux. Otherwise, the residue may impair the esistors' performance and/or reliability. 4. When soldering with a soldering iron, never touch the esistors' bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish the soldering as quickly as possible (within three seconds at 350 C max.). 5. As the amount of applied solder becomes larger, the mechanical stress applied to the esistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amount of solder. 6. Do not apply a shock to the esistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the esistors' protective coatings and bodies may be chipped, affecting their performance. 7. Avoid excessive bend of printed circuit boards in order to protect the esistors from abnormal stress.
6 Caution for Safety (Common precautions for Fixed esistors) When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. Do not use the products beyond the specifications described in this catalog. This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ] Systems equipped with a protection circuit and a protection device ] Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault (1) Precautions for use These products are designed and manufactured for general purpose and standard use in general electronic equip ment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. 1. In liquid, such as water, oil, chemicals, or organic solvent. In direct sunlight, outdoors, or in dust 3. In salty air or air with a high concentration of corrosive gas, such as Cl, HS, NH3, SO, or NO 4. In an environment where strong static electricity or electromagnetic waves exist 5. In an environment where these products cause dew condensation 6. Sealing or coating of these products or a printed circuit board on which these products are mounted, with resin or other materials These products generate Joule heat when energized. Carefully position these products so that their heat will not affect the other components. Carefully position these products so that their temperatures will not exceed the category temperature range due to the effects of neighboring heat-generating components. Do not mount or place heat-generating components or inflammables, such as vinyl-coated wires, near these products. Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the perfor mance or reliability of the products. Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water residues. Otherwise, the insulation performance may be deteriorated. () Precautions for storage The performance of these products, including the solderability, is guaranteed for a year from the date of arrival at your company, provided that they remain packed as they were when delivered and stored at a temperature of 5 C to 35 C and a relative humidity of 45 % to 85 %. Even within the above guarantee periods, do not store these products in the following conditions. Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures. 1. In salty air or in air with a high concentration of corrosive gas, such as Cl, HS, NH3, SO, or NO. In direct sunlight <Package markings> Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. E3
Ultra low ohmic Metal plate / High power type Shunt Resistors
Ultra low ohmic Metal plate / High power type Shunt Resistors PSR Series Features 1) High power class up to 4 to 5W. 2) The lineup of ultra-low resistance value : correspondence from 0.2m 3) Excellent
More informationProduct code Style Construction Inductance Packaging. Core. Core Terminal. Case. D Omission. Terminal Core. Terminal board
Choke Coils Series : Pin terminal Type : 09D, 11D, 12D, 16B, 18B, E, 12E, 15E, 18E Type 09D Type 11D Type 12D Pin terminal inductors featuring small size and high performance Features High - µ and High
More informationZener diode GDZ7.5 GDZ7.5. Diodes. Rev.C 1/4. Dimensions (Unit : mm) Applications Constant voltage control
Zener diode Applications Constant voltage control Dimensions (Unit : mm) Features 1) 2-pin ultra mini-mold type for high-density mounting(gmd2) 2) High reliability. 3) Can be mounted automatically,using
More informationPulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
More informationChip NTC Thermistor for temperature sensor and temperature compensation 0201 size
P 1 / 8 Chip NTC Thermistor for temperature sensor and temperature compensation 0201 size 1. Part Numbering (ex.) NC P 03 XH 103 F 05 RL Product ID Series Dimensions Temperature Resistance Resistance Individual
More informationThe following document contains information on Cypress products.
The following document contains information on Cypress products. HANDLING PRECAUTIONS 1. Handling Precautions Any semiconductor devices have inherently a certain rate of failure. The possibility of failure
More informationSPECIFICATION FOR APPROVAL. Approved by
C O N F I D E N T I A L D O C U M E N T SPECIFICATION FOR APPROVAL CONRAD Description : Royalohm Part no.: 0402WGxxxxxTCE (RMC 1/16W (0402) +/- 1%, 5% & Jumper) 0603SAxxxxxT5E (RMC 1/10W-S (0603) +/- 1%,
More informationFebruary 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,
More informationType RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
More informationWR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402
WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015
More informationFor board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationWCAP-CSGP Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor
More informationDATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/0805/1206/2512. RoHS compliant & Halogen free
DATA SHEET HIGH POWER CHIP RESISTORS RC high power series 5%, 1% sizes 0603/005/1206/2512 RoHS compliant & Halogen free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE
More informationSpecification MBT801-S
Specification MBT801S Drawn SSC Approval 고객명 Approval.com MBT801S 1. Features 2. Absolute Maximum Ratings 3. Electro Characteristics 4. Optical characteristics 5. Outline Dimension 6. Packing 7. Soldering
More informationNichia STS-DA1-0774 <Cat.No.090427> SPECIFICATIONS FOR NICHIA UV NSHU591B MODEL : NICHIA CORPORATION
SPECIFICATIONS FOR NICHIA UV LED MODEL : NSHU591B 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 25 ma Pulse Forward Current IFP 80
More informationZener Diode. Data Sheet EDZ5.6B C C C. 1/4 2011.05 - Rev.F. Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control
Data Sheet Zener Diode EDZ5.6B Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control 0.8±0.05 2±0.05 0.8 Features 1)2-pin ultra mini-mold type for high-density mounting
More informationTypes MC and MCN Multilayer RF Capacitors
High-Frequency, High-Power, High-Voltage Chips with Nonmagnetic Option Rugged flexibility and compatibility with FR4 boards make Type MC and MCN capacitors ideal for use where other multilayer caps aren
More informationPower chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.
FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK
More informationStandard Thick Film Chip Resistors
Standard Thick Film Chip Resistors FEATURES Stability R/R = 1 % for 00 h at 70 C 2 mm pitch packaging option for size Pure tin solder contacts on Ni barrier layer provides compatibility with lead (Pb)-free
More informationKomatsulite NR Series Breaker (Thermal Cutoff Device)
*RoHS COMPLIANT & **HALOGEN FREE Ratings 6 7 5 1 1 1 5 5 C N R 7 2 A B 0 1 2 1 5 C N R 7 7 C B 0 *RoHS COMPLIANT Features n Miniature Thermal Cutoff (TCO) device n Smallest body size, high current type
More informationRectifier Diode 1SR154-400
5.3±..5 9.5±. 5.5±.5 2±.2.75±. Rectifier Diode SR54-4 Application Dimensions (Unit : mm) Land size figure (Unit : mm) General Rectification 2. 2. Features ) Small power mold type (PMDS) PMDS 4.2 2) High
More informationContents. 12. Lot Number 10. 13. Reel Packing Structure 11. 14. Precaution for Use 13. 15. Hazard Substance Analysis 14. 16. Revision History 18
Rev : 00 ISSUE NO : DATE OF ISSUE : 2009. 04. 10 S P E C I F I CATION MODEL : SLHNNWW629T1S0U0S0 [Rank : (S0), (U0), (S0)] HIGH POWER LED - SUNNIX6 CUSTOMER : CUSTOMER CHECKED CHECKED APPROVED SAMSUNG
More informationAutomotive and Anti-Sulfuration Chip Resistor 0402
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
More informationSPECIFICATION MARITEX 06/30/ 08 CHIP INDUCTORS (ROHS)
FL201209SERIESLFR FL201209SERIESLFR Scope: This specification applies to multilayer ferrite & ceramicchip inductors. 1. Part Number Key & Mechanical Drawing FL XX XX XX XXX X A B C Tolerance Inductance
More informationAxial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC and 200 V DC
Axial and Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 5 V DC, 1 V DC and 2 V DC DESIGNING For more than 2 years Vitramon has supported the automotive industry
More informationHigh-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
More informationDATA SHEET PART NO. : L-314YD REV : A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More informationPermissive Operating Current (25 C) (ma) Rated Electric Power (25 C) (mw)
NTC Thermistors for Temperature Sensor Lead Type This product is a sensor type NTC Thermistor to be useful in the normal temperature range developed by the unique ceramic technology and the automatic assembly.
More informationWW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors
WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011
More information3. Terminal Shape P : PCB terminals FS: Surface-mounting terminals, short FL : Surface-mounting terminals, long
Surfacemounting Relay Ultracompact and Slim DPDT Relay Suitable for highdensity mounting.(.7 mm (W). mm (L) 9 mm (H)). Dielectric strength of, VAC and an impulse withstand voltage of 2, V for 2 μs (conforms
More informationSPM series. Inductors for Power Circuits. Wound Metallic Magnetic Material
September 2014 Inductors for Power Circuits Wound Metallic Magnetic Material SPM series SPM3012 SPM3015 SPM3020 SPM4012 SPM4015 SPM4020 SPM5012 SPM5015 SPM5020 SPM5030 SPM6530 (2/49) REMINDERS FOR USING
More informationCeramic Trimmer Capacitors
!Note T3E8.pdf 2.9.2 Ceramic Trimmer Capacitors TZB4 Series.±. Depth.5.4±. dia. Features. Miniature rectangular shape : 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identification of capacitance
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationJanuary 2015. Inductors for Power Circuits. Wound Ferrite. VLCF Series. VLCF5028-2 Type VLCF5028-2
January 2015 Inductors for Power Circuits Wound Ferrite VLCF Series VLCF5028-2 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationNARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
More informationSLLP-5630-150-G PRODUCT DATASHEET. RoHS Compliant
PRODUCT DATASHEET SLLP-5630-150-G Table of Contents Features... 1 Applications 1 Characteristics.. 1 Typical Electro optical Characteristics Curves... 3 Mechanical Dimensions... 4 Carrier Tape Dimensions.....
More informationNovember 2013. 3-terminal Filters. For signal line. MEM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s November 0 -terminal Filters For signal line MEM series MEM0S MEM0SC MEM0V MEM0F MEM608P 0[0805 inch]* 0[0805 inch] 0[0805 inch] 0[0805 inch] 608[060 inch] * Dimensions Code JIS[EIA]
More informationZener Diode UDZV series
Zener Diode UDZV series Datasheet Application Dimensions (Unit : mm) Land size figure (Unit : mm) Constant voltage control.25±..±..5.9min. Features ) Compact,2-pin mini-mold type for high-density mounting.
More informationSchottky Barrier Diode
Data Sheet Schottky Barrier Diode RB2SM-3 Applications Dimensions (Unit : mm) Land size figure (Unit : mm) Small current rectification.8±..2±..8 Features )Ultra small mold type. (EMD2) 2)Low V F 3)High
More informationDATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512
DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification
More informationFeatures. Typical Applications G9. ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 1 DS-0042
ProLight PEA2-3FVE 3W Warm White AC LED Technical Datasheet Version: 1.7 Features High Color rendering index Follow ANSI C78.788.2008 Chromaticity co-ordinates High flux per LED Good color uniformity Industry
More informationDATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS RL-High power series 5%, 2%, 1% sizes 0805/1206
DATA SHEET LOW OHMIC HIGH POWER CHIP RESISTORS series 5%, 2%, 1% sizes 005/1206 RoHS compliant Product specification Aug 27, 200 V.2 Product specification 2 SCOPE This specification describes RL005/1206
More information0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
More informationDATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/122/124/162/164/248/324/158/358 TC: 122/124/164
Product specification December 11, 2015 V.2 0 DATA SHEET ARRAY CHIP RESISTORS YC/TC 5%, 1% sizes YC:102/104/2/4/162/164/248/324/158/358 TC: 2/4/164 RoHS compliant Product specification 2 SCOPE This specification
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip
More informationPulse Proof Thick Film Chip Resistors
Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationTLRK1100C(T11), TLRMK1100C(T11), TLSK1100C(T11), TLOK1100C(T11), TLYK1100C(T11)
TOSHIBA LED Lamps TL(RK,RMK,SK,OK,YK)C(T) TLRKC(T), TLRMKC(T), TLSKC(T), TLOKC(T), TLYKC(T) Panel Circuit Indicators Unit: mm Surface-mount devices.2 (L) mm 2.8 (W) mm.9 (H) mm Flat-top type InGaAlP LEDs
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationSafety Application Guide for Multilayer Ceramic Chip Capacitors
CK-E-1404-01 Date: TO: Safety Application Guide for Multilayer Ceramic Chip Capacitors Signature by receiver(s) Date * Please sign all copies of this document and return one copy for our records. Capacitor
More informationAPPLICATION NOTES for THROUGH-HOLE LEDs
APPLICATION NOTES for THROUGH-HOLE s STORAGE CONDITIONS 1. Avoid continued exposure to the condensing moisture environment and keep the product away from rapid transitions in ambient temperature. 2. s
More information0.45mm Height 0402 Package Pure Green Chip LED Technical Data Sheet. Part No.: LL-S160PGC-G5-1B
.45mm Height 42 Package Pure Green Chip LED Technical Data Sheet Part No.: LL-S16PGC-G5-1B Spec No.: S16 Rev No.: V.2 Date: Dec./6/25 Page: 1 OF 9 Features: Package in 8mm tape on 7" diameter reel. Compatible
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More informationProduct Specification
Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should
More information30W Epistar 45mil Chip High Power LED
30W Epistar 45mil Chip High Power LED White:LEDE-P30-DH-White Warm White:LEDE-P30-DWH Features Long operating life Highest Luminous flux Wide range of colours:2500k-25000k Chip size: Epistar 45*45mil More
More information0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product Specification October 13, 11 V.8 Product
More information3W High Power LED. Features. Applications. Catalog
Features Highest flux per LED family in the world Very long operating life (up to 100k hours) Available in Red, Yellow, Green, Blue, White Lambertian radiation pattern More energy efficient than incandescent
More informationEmbossed Tape Reel size (mm) 330 lapplication Type Tape width (mm) 12 Switching Basic ordering unit (pcs) 2500
RS1E240GN Nch 30V 72A Power MOSFET Datasheet V DSS 30V R DS(on) (Max.) 3.3mΩ loutline I D ±72A HSOP8 P D 27W lfeatures 1) Low on - resistance. 2) High power package (HSOP8). 3) Pb-free lead plating ; RoHS
More information3mm Photodiode,T-1 PD204-6C/L3
3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
More informationNo. STSE-CC5037A <Cat.No.050411> SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED MODEL : NSSB100BT NICHIA CORPORATION -0-
No. STSE-CC5037A SPECIFICATIONS FOR NICHIA CHIP TYPE BLUE LED MODEL : NSSB100BT NICHIA CORPORATION -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings () Item Symbol Absolute Maximum Rating Unit Forward
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Technical Data Sheet High Power LED 1W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 150. Typical light flux output: 30 lm @ 350mA. ESD protection.
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Automotive Applications FEATURES AEC-Q200 qualified with PPAP available Available in 0402 to 1812 body size Three dielectric materials AgPd termination
More informationESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips
ESCC 4001/026 Qualified ( ) High Stability Thick Film Resistor Chips thick film chip resistors are specially designed to meet the requirements of the ESA 4001/026 specification. They have undergone the
More informationDATA SHEET CHIP RESISTORS RT Series 1%; 0.5%; 0.25%; 0.1%
DATA SHEET CHIP RESISTORS Series 1%; 0.5%; 0.25%; 0.1% Product specification Supersedes Date of Sep. 30, 2003 ynsc004 ynsc015 ynsc002 ynsc007 2 SCOPE This specification describes series chip resistors
More informationSpecification MWT801-S
Specification MWT801S Drawn SSC Approval Customer Approval.com MWT801S 1. Features 2. Absolute Maimum Ratings 3. Electro Characteristics 4. Optical characteristics 5. CIE Chromaticit Diagram 6. Outline
More informationSPECIFICATION. Topview 5550 SMD LED IWS 505-RB. Product : Topview 5550 SMD LED Part No : IWS-505-RB Customer : Date : 2007. 11. 10 Ver.1.0.
SPECIFICATION Product : Topview 555 SMD LED Part No : Customer : Date : 27.. Ver.. Customer : Approval Manufacturer : ITSWELL Co., LTD Proposed By Approval Comment Suwon Company : 442-9, 82 Uman Industrial
More informationAPPLICATION NOTES FOR SMD LEDs
Storage conditions SMD devices are usually moisture/reflow sensitive. Moisture from atmospheric humidity enters permeable packaging materials by diffusion. Assembly processed used to solder SMD packages
More informationPulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent
More informationR50E.pdf 08.8.26. o Part Numbering. Trimmer Potentiometers. (Part Number) 103 r. C01 t. R00 y. Total Resistance. qproduct ID
!Note This!Note DF catalog lease is downloaded read rating and from!cution the website (for of Murata storage, Manufacturing operating, rating, co., ltd. soldering, Therefore, mounting it s specifications
More informationData Sheets of AVA Technology SMD Type White LED. Model : T5050. AVA Technology Co.
Data Sheets of AVA Technology SMD Type White LED Model : AVA Technology Co. 2640 S. Myrtle Ave. Suite 6 Monrovia, CA 91016 P: 626-574-7726 F: 626-574-7732 http://www.led4light.com Top View LED with Reflector
More informationApplication Note. Soldering Methods and Procedures for 1st and 2nd Generation Power Modules. Overview. Analysis of a Good Solder Joint
Soldering Methods and Procedures for 1st and 2nd Generation Power Modules Overview This document is intended to provide guidance in utilizing soldering practices to make high quality connections of Vicor
More informationMURATA MANUFACTURING Co., LTD.
For Reference Only 1/16 Pyroelectric infrared sensor IRS-B345ST03 Preliminary Product specification 1 Scope This product specification is applied to parallel-quad element type pyroelectric infrared sensor
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE : 2010. 12. 16. SPECIFICATIONS FOR APPROVAL PRODUCT NAME : Top View Type White SMD LED MODEL NAME : LEMWS59T80LZ00 APPROVAL REMARK APPENDIX Designed Checked Approved LG Innotek Co., Ltd.
More informationNo. STSE-CW2163B <Cat.No.031110> SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS NICHIA CORPORATION -0-
No. STSE-CW2163B SPECIFICATIONS FOR NICHIA WHITE LED MODEL : NSPW315BS -0- 1.SPECIFICATIONS (1) Absolute Maximum Ratings (Ta=25 C) Item Symbol Absolute Maximum Rating Unit Forward Current IF 30 ma Pulse
More informationPART NO.: L-C150SRCT REV: A / 4
PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: para@para.com.tw http://www.para.com.tw DATA SHEET
More informationHarvatek Surface Mount LED Data Sheet. HT-F195 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Jul. 15, 2005 Version of 1.4 Page 1/20 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
More informationHarvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series
Harvatek Surface Mount LED Data Sheet HT-T167 Ultra-bright Reverse Gullwing Series Jul. 21, 2005 Version of 1.1 Page 1/22 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 LABEL SPECIFICATIONS...5 PRODUCT CHARACTERISTICS...10
More informationEE-SX91. Meeting Customer Needs with Compact Sensors that Mount with M3 Screws
Compact Pre-wired Photomicrosensor with Built-in Amplifier (Non-modulated) CSM DS_E_7_2 Meeting Customer Needs with Compact Sensors that Mount with M Screws Both light-on and dark-on outputs provided.
More informationHarvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
More informationSuntan Technology Company Limited. Application Guidelines For Tantalum Electroilytic Capacitors
For obtaining the most stable quality and sufficient Performance of the tantalum electrolytic capacitors,appropriate use must be made.before use,confirm the use conditions and rating performance of the
More informationONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
More informationChip tantalum capacitors
Chip tantalum capacitors TC Series Case Features 1) Small package, large capacitance chip tantalum capacitor. 2) Low impedance capacitors. 3) Screening by thermal shock. Dimensions node mark (Unit : mm)
More informationWhat is surface mount?
A way of attaching electronic components to a printed circuit board The solder joint forms the mechanical and electrical connection What is surface mount? Bonding of the solder joint is to the surface
More informationSURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7
More information1.50mm Height 2220 Package Top View Full Color Chip LEDs Technical Data Sheet. Part No.: LL-R5050RGBC-001
.5mm Height 222 Package Top View Full Color Chip LEDs Technical Data Sheet Part No.: LL-R55RGBC- Spec No.: R55 Rev No.: V.2 Date: Mar./6/26 Page: OF 2 Features: P-LCC-6 package. White package. Optical
More information703-0148 InGaN / Sapphire White Water clear. Parameter Rating Unit
Package Dimensions: * All dimensions are in mm * Tolerance: ±.6mm unless otherwise noted. LED Chip Lens Colour Ant Part No. Material Colour Coordinates 73-148 InGaN / Sapphire White Water clear Absolute
More informationST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing
More informationRoHS-Compliant Through-Hole VI Chip Soldering Recommendations
APPLICATION NOTE AN:017 RoHS-Compliant Through-Hole VI Chip Soldering Recommendations Ankur Patel Associate Product Line Engineer Contents Page Introduction 1 Wave Soldering 1 Hand Soldering 4 Pin/Lead
More informationSPECIFICATION. PART NO. : MT0380-UV-A 5.0mm ROUND LED LAMP. 3Northway Lane North Latham,New York 12110.
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MT0380-UV-A LAMP ATTENTION OBSERVE PRECAUTION
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
AC and Pulse Film Foil Capacitors KP Radial Potted Type 0.5 L max. W max. Marking H max. FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel Material categorization: for definitions
More informationGas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
More informationMADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
More informationSurface Mounting Relay
Surface Mounting Relay Surface Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density
More information50 W Power Resistor, Thick Film Technology, TO-220
50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material
More informationG6K. Surface Mounting Relay with the World s Smallest Mounting Area. Model Number Legend. Application Examples. Surface Mounting Relay
with the World s Smallest Mounting Area Subminiature model as small as.2 (H). (W) (L) mm is ideal for high-density mounting ((U)-2F(-Y)). Low profile of.2 mm improves mounting efficiency ((U)-2F(-Y)).
More informationPower Resistor Thick Film Technology
Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES
More informationSMD Low Power LED 61-238/XK2C-BXXXXXXXXXX/ET
SMD Low Power LED Features P-LCC-6 package Top view LED Wide viewing angle:120 High Luminous intensity High Efficacy Pb-free RoHS-compliant. Description The Everlight 61-238 package has high efficacy,
More informationSurface Mounting Relay
Surface Mounting Relay Surface Mounting Relay with the World s Smallest Mounting Area and a Height of Only 5.2 mm Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density
More information