Miniature Rocker Switch

Transcription

1 Miniature Rocker Switch Miniature Rocker Switch for High Capacity Switching Withstands inrush currents up to A with a unique switching mechanism. Soft touch with firm switching action. Easy to mount by snap fitting. Contact gap of 3 mm minimum. UL and cul standards approved. Conforms to EN standards. RoHS Compliant Caution Refer to Precautions List of Models Contact Form Terminals Solder terminals SPST 1 Right-angled Left-angled Quick-connect terminals #187 Color of caps and cases Black Black Black Black Black Without markings N1-11-1N N1-11-1N1-11-N1 Quantity per box Marking on caps N -11-1N N -11-1N -11-N N3-11-1N N3-11-1N3-11-N3 3 OFF ON N6-11-1N N6-11-1N6-11-N6 Contact Form Terminals Solder terminals DPST 1 3 Right-angled Left-angled Quick-connect terminals #187 Color of caps and cases Black Black Black Black Black Without markings --11N1 --1N1 --13N1 --1N1 --N1 Quantity per box Marking on caps --11N --1N --13N --1N --N --11N3 --1N3 --13N3 --1N3 --N3 3 OFF ON --11N6 --1N6 --13N6 --1N6 --N6 Simple dust-proof models are available. Consult your OMRON representative. 1

2 Ratings Rated load Non-inductive Inductive Resistive load Lamp load Inductive load Inductive motor load 15 VAC A A 8 A 8 A 5 VAC A A 8 A 8 A 1. The non-inductive lamp load has an inrush current times steady current.. The inductive load has a power factor of. minimum (AC). 3. The motor load has an inrush current 6 times steady current. The above ratings were tested under the following conditions: 1. Ambient temperature:± C. Ambient humidity:65±5%rh 3. Switching frequency:7 times/min Approved Safety Standards UL, cul (UL5/CSA C. No. 55) A, 15 VAC; A, 5 VAC TÜV (EN658-1) (8) A, 5 VAC Characteristics Permissible operating frequency Insulation resistance Mechanical Electrical Contact resistance (initial value) Dielectric strength Between terminals of the same polarity Between terminals of the different polarity Between charged metal parts and the ground terminal operations/min max. 7 operations/min max. MΩ min. (at 5 VDC with insulation tester) mω max. (6 to 8 VDC, 1 A, voltage drop method), VAC, 5/6 Hz, for 1 min, VAC, 5/6 Hz, for 1 min, VAC, 5/6 Hz, for 1 min Vibration resistance Malfunction to 55 Hz, 1.5-mm double amplitude Shock resistance Durability Inrush current Degree of protection Ambient operating temperature Ambient operating humidity Malfunction 3 m/s Destruction 5 m/s Mechanical Electrical 5, operations min., operations min. A max. (8.3 ms max.) IEC IP to +55 C (with no icing or condensation) 5 to 85%RH Consult your OMRON representative for details of performance characteristics with respect to individual standards. Dimensions (Unit: mm) The following illustrations and drawings are for poles (DPST) models, 1 pole (SPST) models have single side terminals. Solder Terminals N1 --11N N --11N N3 --11N N6 --11N dia dia..8 Unless otherwise specified, a tolerance of ±. mm applies to all dimensions.

3 PCB Terminals -11-1N1 --1N1-11-1N --1N -11-1N3 --1N3-11-1N6 --1N Four, 1.8±.1-dia. holes ±.1 ±.1 Right-angled PCB Terminals N1 --13N N --13N N3 --13N N6 --13N Four, 1.8±.1-dia. holes 3.3 8±.1 ±.1 Left-angled PCB Terminals -11-1N1 --1N1-11-1N --1N -11-1N3 --1N3-11-1N6 --1N Four, 1.8±.1-dia. holes 3.3 8±.1 ±.1 Unless otherwise specified, a tolerance of ±. mm applies to all dimensions. 3

4 Quick-connect Terminals # N1 --N1-11-N --N -11-N3 --N3-11-N6 --N ±.1 dia. hole 3±.1.8 Unless otherwise specified, a tolerance of ±. mm applies to all dimensions. Panel Cutout X Y Panel Cutout for Angled PCB Terminals (-@@-@3@@, -@@-@@@) X Panel thickness (mm) X (mm) Y (mm).75 to ± to ±.3 Recommended panel material: SPCC Panel thickness (mm) X (mm) Play R.75 to to Edge When processing the panel, be sure that the Play R is on the switch operation side. Be sure that the Edge is on the reverse side of panel when processing. Precautions Be sure to read the Safety precautions common to all Rocker Switches for correct use.

5 Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: Cat. No. A11-E1-7 1(7)(O)