ZERO COMPROMISE INFINITE POSSIBILITIES

Transcription

1 ZERO COMPROMISE INFINITE POSSIBILITIES Featured Products

2 DisplayNet HDMI 10GbE Transmitters and Receivers DisplayNet : AV Connectivity Redefined DisplayNet is an award-winning new concept for AV distribution that leverages proven 10GbE Ethernet technology to switch, extend and distribute uncompressed AV signals in real time with resolutions up to 4K (UHD). DisplayNet delivers unprecedented levels of scalability, versatility and reliability with zero frame latency, zero compression and zero artifacts. DisplayNet leverages decades of proven networking technology and massive global deployment of 10GbE networks. This eliminates the need for costly, redundant AV networks as all AV assets can now reside on existing IT networks that IT Managers can easily control. 10GbE network switches can also be up to 60% smaller than typical AV switches and as little as 1/10th the cost. At the same time, DisplayNet provides enormous scalability the system array is limited only by the number of installed endpoints and size (ports) of the 10GbE switch. DN-100 Series Transmitters and Receivers The DN-100 Series Transmitters and Receivers are the first in an expanding line of DisplayNet uncompressed AV-Over-IP products. The DN-100TX transmitter accepts multiple signals such as HDMI (with embedded audio and HDCP), analog stereo audio, bidirectional IR, RS-232, and 1GbE Ethernet and transmits them via a 10GbE link up to 328 ft. (100 meters) using a single CAT6a or CAT7 cable. This link is then distributed via an off-the-shelf 10GbE network switch to receiver units, which provide AV output signals at the destination. The DN-100 Series supports uncompressed video up to 4K /30p (4:4:4) and 4K /60p (4:2:0) without compression artifacts and without frame latency. Video signals may be simultaneously routed in Point-to-Point, Matrix Switching and Video Wall modes all in the same system. For more flexibility, each signal plane (Video, Audio, IR, RS-232, etc.) can be routed independently. The DN-100 Series supports advanced audio features, including: networked audio, audio embedding, de-embedding and down mixing. The DN-100 Series includes powerful DisplayNet Manager software and an external DisplayNet Server that enable the system to be managed using third-party controllers. DisplayNet isn t just new technology, it s a new paradigm for AV system integration. Welcome to the future. MSRP: $995 (each) Shipping now Supports 4K 1

3 DisplayNet HDMI 10GbE Transmitters and Receivers Distribute AV signals using off-the-shelf 10GbE network switches Fast / Seamless Switching of HDMI signals up to 4K /30p (4:4:4), and 4K /60p (4:2:0) Vastly superior to existing Video over IP products: zero frame latency, no compression, no artifacts Supports HDMI, HDCP, Embedded Audio, External Audio, IR, RS-232 and 1GbE over 10GbE link Fully Routable, Independent Switching Planes for all signal planes (e.g. Video, Audio, IR, RS232, etc.) Unconstrained scalability Supports nearly limitless arrays of I/O ports Maximum range up to 328 ft. (100 meters) using a single CAT6A or CAT7 cable DisplayNet Server and DisplayNet Manager enable deep integration into new or existing AV systems All endpoints include a built-in Gigabit Ethernet switch for high-speed local network connections Leverages decades of proven networking technology and global deployment of 10GbE networks AV assets no longer need to be aggregated using an expensive AV Matrix Switcher Eliminates the need for costly AV networks as all AV assets can now reside on existing IT networks IT Managers can easily manage AV assets within corporate network environments 10GbE network switches can be up to 60% smaller than AV switches and up to 1/10th the cost Capable of concurrent Video Wall and Matrix Switching operation - diverse range of applications Embedded Local Management DisplayNet auto-configures all connected devices even in the most complex networked systems thus eliminating the need for network switch configuration MSRP: $995 (each) Shipping now Supports 4K 2

4 DVI-3580a 4K MultiViewer Switcher / Scaler Feature-Rich MultiViewer The DVI-3580a is a high-performance 4K MultiViewer Switcher / Scaler. This unit is an ideal solution for system designers and facility managers that face uncertain requirements from presenters that need AV signal distribution for a diverse range of source devices, resolutions and signal formats. The DVI-3580a overcomes these challenges through a rich array of input connections that supports all popular AV input signal formats, a range of user-selectable output resolutions, seamless switching, and innovative MultiViewer capabilities. These features provide the power and flexibility needed to adapt to the ever-changing demands of media-rich AV environments. MultiViewing of up to 4x video signals simultaneously; four user-selectable window layouts: single, double, triple, quadruple HDMI input resolutions up to 4K /30p; DisplayPort input resolutions up to 4K /60p User-selectable output resolutions up to 3840x2160 /30p Includes 7x inputs: 4x HDMI (or DVI), 2x DisplayPort, 1x RGB / YPbPr Analog (VGA) Seamless switching of input signals HDMI and DP inputs support HDCP encryption 2x mirrored outputs: 1x HDMI and 1x HDBaseT (with POH support PSE device) Each video input is coupled with an external analog stereo audio input for audio embedding De-embedded 8-channel (7.1) analog audio output and TOSLINK optical audio output Controllable via LAN (built-in Web GUI or Telnet), RS-232, IR Remote Control, and Front Panel selections Advanced EDID Management: preset EDIDs, learn EDID, and upload / download EDID MSRP: $2,195 Shipping now Supports 4K 3

5 DVI-3585a 4K Presentation Switcher / Scaler Presentation Powerhouse The DVI-3585a is a high-performance 4K Presentation Switcher / Scaler. This unit is an ideal solution for system designers and facility managers that face uncertain requirements from presenters that need AV signal distribution for a diverse range of source devices, resolutions and signal formats. The DVI-3585a overcomes these challenges through a rich array of input connections that supports all popular AV input signal formats, a range of user-selectable output resolutions, and seamless switching. These features provide the power and flexibility needed to adapt to the ever-changing demands of media-rich AV environments. HDMI input resolutions up to 4K /30p; DisplayPort input resolutions up to 4K /60p User-selectable output resolutions up to 3840x2160 /30p Includes 7x inputs: 4x HDMI (or DVI), 1x DisplayPort, 1x DVI, 1x RGB / YPbPr Analog (VGA) Seamless switching of input signals HDMI and DP inputs support HDCP encryption 2x mirrored outputs: 1x HDMI and 1x HDBaseT (with POH support PSE device) Each video input is coupled with an external analog stereo audio input for audio embedding De-embedded 8-channel (7.1) analog audio output and TOSLINK optical audio output Controllable via LAN (built-in Web GUI or Telnet), RS-232, IR Remote Control, and Front Panel selections Advanced EDID Management: preset EDIDs, learn EDID, and upload / download EDID MSRP: $1,495 Shipping July 2016 Supports 4K 4

6 DVI K KVM Fiber Optic Extender, 1x LC Unsurpassed Performance The DVI-7316 is a high performance 4K Optical Extender that transmits high resolution HDMI signals as well as USB 1.1 signals over extreme distances using a single fiber optic cable. This extender supports HDMI v1.4 (HDCP compliant) signals with resolutions up to 4K (4096x2160 / 30p) over cable distances up to ~1,000 ft. (300 meters). Multiple Signals Over One Cable While the video component of the signal is one-way, the unit also simultaneously supports extension of bidirectional signals such as USB 1.1 as well as EDID and HDCP pass-through. This enables remote USB KVM device configurations as well as DDC communications without the need for additional cables. These features make the DVI 7316 the ideal future-proof choice for systems designers and integrators who need to support high resolution video in KVM applications over extreme distances. Supports DVI and HDMI v1.4 (HDCP compliant) Supports USB 1.1 for remote KVM operation Supports 4K (UHD) and resolutions up to 4096x2160 /30p Maximum extension distances: 4K (UHD) resolution: ~ 1,000 ft. (300 meters) With USB 1.1 Full Speed support: ~ 130 ft. (40 meters) With USB 1.1 Low Speed support: ~ 650 ft. (200 meters) All features are extended over a single strand of LC-terminated Multi-Mode optical fiber Cutting-edge 10.3 Gbps SerDes enables extension of three distinct signal lanes over a single optical cable Optical fiber transmission is immune to environmental signal noise Low RFI / EMI profile for sensitive applications Transmitter unit can be powered by HDMI source in most applications MSRP: $998 (per set) Shipping now Supports 4K 5

7 DVI-7340, DVI-7340-ST 4K MultiPort Fiber Optic Extender, 1x LC or ST Multiple Signals, One Fiber Cable The DVI-7340 is a high performance, ruggedized single fiber extender. It supports extension of multiple signals such as HDMI 1.4 (or DVI) with or without HDCP, RS-232, bidirectional IR, 10/100 Ethernet and Balanced or Unbalanced Audio over a single LC or ST terminated fiber optic cable. It supports resolutions up to 4K /30p (with HDCP) over cable lengths of up to 1,000 ft. (300m) using Multi-Mode or 0.6 mi. (1 km) using Single- Mode fiber. The DVI-7340 includes EDID management features such as learning EDID to the transmitter, using an factory provided internal EDID value, or EDID pass-through mode, which also supports HDCP communications. Supports HDMI 1.4 (or DVI) with or without HDCP, RS-232, bidirectional IR, 10/100 Ethernet and audio Supports resolutions up to 4K /30p (with HDCP) over cable lengths up to: Multi-Mode Fiber: 1,000 ft. (300 meters) Single-Mode Fiber: 3,280 ft. (1,000 meters) Uses 1x Single-Mode or Multi-Mode LC (standard) or ST (optional) fiber Ruggedized ST version is ideal for demanding rental & staging environments EDID management: Learn EDID in Tx, Internal EDID, or EDID pass-through to support HDCP signals Long-distance extension of Ethernet, RS-232, and bidirectional IR control signals Supports extension of balanced or unbalanced audio Locking DC power connector for added security MSRP: $1,350 (per set) Shipping August 2016 Supports 4K 6

8 DVI K SM Fiber Optic Extender, 1x LC Performance that Goes the Extra Mile The DVI-7314 is a high performance 4K Optical Extender that transmits high resolution DVI / HDMI signals over extreme distances using a single fiber optic cable. This extender supports HDMI v1.4 (non-hdcp) signals with resolutions up to 4K (4096x2160 / 30p) over cable distances up to 1.2 miles. The transmitter unit includes an internal EDID memory that can acquire and store the EDID from any display. The DVI-7314 supports both Multi-Mode and Single-Mode fiber optic cable. Cutting-Edge Optics Most single-fiber optical extenders transmit signals over multiple optical wavelengths, which can suffer from chromatic dispersion over long cable runs. To avoid this issue, these extenders employ a cutting-edge, high-speed SerDes that combines the DVI / HDMI signal channels into a single uncompressed 10.3 Gbps bit stream. This enables the optical transmission of the signal over a single optical wavelength, which provides increased signal fidelity, stability and flawless image quality, regardless of cable length. These features make the DVI-7314 the ideal future-proof choices for high resolution DVI / HDMI transmission over extreme distances. Supports DVI and HDMI v1.4 (not HDCP compliant) Supports 4K (UHD) and resolutions up to 4096x2160 / 30p DVI-7314 supports Single-Mode fiber optic cable lengths up to (1.2 miles / 2.0 km) and Multi-Mode fiber up to (1640 ft. / 500 meters) Extends signals over a single strand of LC-terminated optical fiber Transmitter includes EDID memory to cache the EDID from any display Transmitter unit can be powered by DVI source in most applications Low RFI / EMI profile for sensitive applications Optical fiber transmission is immune to environmental signal noise MSRP: $798 (per set) Shipping now Supports 4K 7

9 DVI-7360, DVI-7360-ST HDMI Fiber Optic Extender, 2x LC or ST Extreme Distances The DVI-7360 supports optical links using either multi-mode or singlemode fiber. In applications where HDCP support is not needed, this extender supports long-haul optical links up to 2.8 miles (4.5 kilometers) using single-mode fiber optic cables. These features make the DVI-7360 a powerful solution for digital display applications that require flawless signal quality over extremely long cable runs. HDMI v1.4 and HDCP compliant Resolutions up to 4096x2160 / 30p for over 2 miles Uses 2x Multi-Mode or Single-Mode optical cable Choice of either LC or ST terminated versions Supports cable lengths up to ~2.8 miles (4.5 km) Low RFI / EMI profile and immune to environmental signal noise MSRP: $1,195 (per set) Shipping now Supports 4K DVI G-SDI Fiber Optic Extender, 1x ST Long Distance Performer The DVI-7345 is an ultra-compact, high performance fiber optic extender that supports SDI, HD-SDI and 3G-SDI extension over a single strand of Single-Mode optical fiber at distances up to 1.2 miles (~ 2000 meters). Supports SD-SDI, HD-SDI, and 3G-SDI Ultra-compact, can be mounted on an SDI port Supports data rate up to 2.97Gbps. Uses 1x optical cable up to 1.2 miles (~ 2.0 km) Rugged BNC electrical connectors and ST connectors MSRP: $650 (per set) Shipping now Supports 3G-SDI 8

10 Super High Resolution DVI / HDMI Cables Superior Performance DVIGear s Super High Resolution (SHR ) DVI and HDMI cables are designed to transport high speed digital DVI and HDMI signals with bit rates up to 3.4 Gbps. When coupled with DVIGear s Active Cable Extenders (ACE ), it supports cable lengths of up to 60 meters (~ 200 ft.) while maintaining full compliance with DVI and HDMI signal parameters. HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m HDMI data rates up to 2.25 Gbps. at lengths up to 40m Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60 meters (~ 200 ft.) Heavy-duty 22AWG copper wires provide minimal insertion loss MSRP: Varies by length Shipping now Supports 4K SHRD, HRD, SRD Dual-Link DVI Copper Cables Superior Performance DVIGear s Dual-Link DVI cables are engineered to transport high resolution digital Dual-Link DVI signals with bit rates up to 3.30 Gbps. over very long distances while maintaining pristine signal / bit integrity. When coupled with DVIGear s Active Cable Extenders (ACE ), it supports cable lengths of up to 60 meters (~ 200 ft.). Supports resolutions up to 3840x2400 / 60 Hz Supports cable lengths up to 60 meters (~ 200 ft.) Choose from 22AWG, 26AWG, and 28AWG cables for application specific cable flexibility Triple shielded for superior noise immunity Ultra-low Skew guarantees unsurpassed digital fidelity MSRP: Varies by length Shipping now Supports 4K 9

11 DVI-26xx-HR High Resolution DisplayPort Cables Superior Performance DVIGear s High Resolution (HR ) DisplayPort cables are engineered for unsurpassed performance and reliability in mission critical applications. These cables are designed to transport high speed digital DisplayPort signals with bit rates up to 21.6 Gbps. over long distances while maintaining pristine signal integrity. Supports resolutions up to 4096x2160 / 60p Supports cable lengths up to 15 meters (~ 50 ft.) Supports DisplayPort data rates up to 21.6 Gbps. Heavy-duty 24AWG wires provide minimal insertion loss Triple shielded for superior noise immunity Ultra-low Skew guarantees unsurpassed digital fidelity MSRP: Varies by length Shipping now Supports 4K DVI-26xx-FO DisplayPort v1.2 FO Cables Superior Performance Designed to overcome the limitations of sending digital DisplayPort signals over copper wires, DVIGear s fiber optic cables provide unmatched signal fidelity and transparency at resolutions up to 60Hz with lengths up to 40 meters (130 ft.). These cables draw power from the connected DisplayPort source, which eliminates the need for an external power supply. Resolutions up to 60Hz Cable lengths up to 40 meters (130 ft.) Optical fiber transmission is immune to environmental signal noise Low RFI / EMI profile for sensitive applications Powered by the DisplayPort source device MSRP: Varies by length Shipping now Supports 4K 10

12 DVI-7525 HDMI HDBaseT Extender Multiple Signals Over One Cable DVIGear s DVI-7525 utilizes HDBaseT technology to provide a simple and cost-effective solution for extension of uncompressed HDMI or DVI, embedded audio, bidirectional IR, RS-232 and Ethernet using a single twisted pair CAT-X cable. Feature-Rich, Future-Proof Unlike other products, these extenders support the full range of HDBaseT features, including: support for 4K / 30p (UHD) resolution, bidirectional IR, POH and long-range operation. They support extension of HDMI signals with 1080p resolution up to 330 ft. (~ 100 meters) and 4K (UHD) resolution up to 230 ft. (~ 70 meters). DVIGear s DVI-7520 and DVI-7525 include a fully-compliant implementation of Power over HDBaseT (POH), a key component of the HDBaseT standard. Class A: Extends HDMI, Ethernet, RS-232, and bidirectional IR over a single CAT-X cable Supports 4K resolutions up to 4096x2160 / 30p Supports HDBaseT POH standard with remote power from TX to RX unit over the CAT-X cable Fully HDCP compliant, EDID and CEC transparent Extends 1080p HDMI signals up to 330 ft. (~ 100 meters) Extends 4K (UHD) HDMI signals up to 230 ft. (~ 70 meters) Multiple extender pairs can be cascaded for applications that require extreme distances Heavy-duty mounting brackets are included MSRP: $520 (per set) Shipping now Supports 4K 11

13 DVI-7520 HDMI HDBaseT Extender Multiple Signals Over One Cable This HDBaseT extender provides a simple and costeffective solution for extension of uncompressed HDMI or DVI, embedded audio, bidirectional IR, and RS-232 using a single twisted pair CAT-X cable. It supports resolutions up to 4K /30p up to 130 ft. and 1080p up to 230 ft. This unit is fully compliant with Power over HDBaseT (POH), a key component of the HDBaseT standard. Class B: Extends HDMI, RS-232, and bidirectional IR over a single CAT-X cable 1080p HDMI up to 230 ft. (~ 70 meters) 4K (UHD) up to 130 ft. (~ 40 meters) POH remote power from TX to RX over CAT-X cable Fully HDCP compliant, EDID and CEC transparent MSRP: $398 (per set) Shipping now Supports 4K DVI-7520-PDU Power Distribution Unit Exceptional Reliability This Power Distribution Unit provides 12 VDC for up to 8x devices in a rack environment. It offers an unprecedented level of reliability with an MTBF of greater than 220,000 hours. The unit has an overall power reserve of 200 watts. These features allow system designers to optimize power management through more efficient use of rack space. Universal AC Input ( VAC), 8x channels of 12 VDC output Delivers up to 16.7 amps, draws only 2.5 amps High reliability more than 200,000 MTBF Overload, over-voltage, over-temp. protection 1U high, half-rack width, rack-mountable Compatible with DN-100 Series / DVI-7520 / DVI-7525 MSRP: $450 Shipping now Power Outputs: 8x 12 VDC 12

14 DVI-3720a 3G / HD-SDI to HDMI Converter Highly Flexible This high-performance format converter allows SD-SDI, HD-SDI or 3G-SDI signals to be displayed on an HDMI display device. The unit includes 2x equalized and re-clocked SDI outputs for local monitor or long distance extension up to 330 ft. (~ 100 meters). Analog stereo audio break-out connections are also included. SD-SDI, HD-SDI, and 3G-SDI to HDMI Signal Conversion Simultaneous 3G-SDI and HDMI outputs Bit rates of up to Gbps. 2x Equalized and Re-Clocked Looped SDI Outputs Embedded LPCM 2.0 or LPCM 7.1 audio over the HDMI output Conversion of SMPTE 425M B to A for 1080p Extends 3G-SDI up to 330 ft. (~ 100m) MSRP: $395 Shipping now Supports 3G-SDI DVI-3730a HDMI to 3G / HD-SDI Converter Perfect Performance The DVI-3730a is a high-performance device that converts an HDMI input signal to SD-SDI, HD-SDI, or 3G-SDI. This unit is HDCP compliant and supports all SD, HD, and 3G resolutions up to 1920x1080 /60p. The DVI-3730a includes 2x equalized and re-clocked SDI outputs, which supports extension of 3G-SDI up to 330 ft. (~ 100 meters). The included EDID functions offer flexibility and ease of setup. HDMI to SD-SDI, HD-SDI, and 3G-SDI Signal Conversion; bit rates up to Gbps. 2x Equalized, Re-clocked SDI outputs Extends 3G-SDI up to 330 ft. (~ 100m), HD-SDI up to 650 ft. (200m), and SD-SDI up to 1000 ft. (300m) Supports external stereo analog audio embedding MSRP: $395 Shipping now Supports 3G-SDI 13

15 Summary DN-100TX, DN-100RX DisplayNet HDMI 10GbE Transmitters and Receivers... 1 DVI-3580a 4K MultiViewer Switcher / Scaler... 3 DVI-3585a 4K Presentation Switcher / Scaler... 4 DVI K KVM Fiber Optic Extender, 1x LC... 5 DVI-7340, DVI-7340-ST 4K MultiPort Fiber Optic Extender, 1x LC or ST... 6 DVI K SM Fiber Optic Extender, 1x LC... 7 DVI-7360, DVI-7360-ST HDMI Fiber Optic Extender, 2x LC or ST... 8 DVI G-SDI Fiber Optic Extender, 1x ST... 8 DVI-23xx-SHR, DVI-24xx-SHR, DVI-25xx-SHR Super High Resolution DVI and HDMI Copper Cables... 9 DVI-23xx-SHRD, DVI-23xx-HRD, DVI-23xx-SRD SHRD, HRD, SRD Dual-Link DVI Copper Cables... 9 DVI-26xx-HR High Resolution DisplayPort Cables DVI-26xx-FO DisplayPort v1.2 Fiber Optic Cables DVI-7525 HDMI HDBaseT Extender DVI-7520 HDMI HDBaseT Extender DVI-7520-PDU Power Distribution Unit DVI-3720a 3G / HD-SDI to HDMI Converter DVI-3730a HDMI to 3G / HD-SDI Converter

16 Your Digital Connectivity Experts Toll Free Phone Fax DVIGear, Inc Triad Court, Suite 8 Marietta, Georgia DVI-FP-BR-01 / May DVIGear, Inc.