9 Control Equipment. Control Unit System Series ConSig 8040

Transcription

1 9 Control Equipment Control Unit System 01719E00 The enclosure makes it possible to assemble different control units in a clear layout. Due to the fact that a wide range of control devices is available this enclosure covers a broad field of applications. Explosion protection to CENELEC IEC NEC For use in Zone 1 and Zone 2 Zone 21 and Zone 22 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester resin Up to 3 insertion points available per individual unit Individual units can be combined into larger units Options: flanges in brass or moulded plastic metal plates where metal cable entries are used equipment identification plate can be attached Contact blocks 8082 and 8208 with SIL certificates On request with contact block 8208 for extra low currents, with open-circuit and short-circuit monitoring 9/1Zones 1 & 2, 21 & 22

2 Control Unit System 9 Pushbutton 8040/ /rt/I/gn-060 0, E00 Mushroom button d 38 mm black 8040/ I/sw-060 0, E00 Mushroom stayput d 38 mm 8040/ , E E E00 d 55 mm 8040/ , E E00 d 38 mm 8040/ , E E00 Mushroom stayput key release d 38 mm 8040/ , E00 Key-operated switch 05510E00 2 switching key withdrawable in 0 + I 8040/ r-060 0, E E00 3 switching key withdrawable in I II 08752E / rr-062 0,450 Twin pushbutton 8040/ I/gn/0/rt-060 0, E E00 Illuminated pushbutton spring return, yellow,, 08015E / al-737 0, E00 9/2

3 9 Control Unit System Indicating lamp Diode indicating lamp 8040/ al-064 0, E00, yellow,, 08006E00 Selector switch with switch element switching 8040/ r-060 0, E E00 3 switching 8040/ rr-062 0, E E00 Control switch with switch 8008 and large actuator with large actuator > Contact arrangement (see switch 8008) 8040/ , E00 Control switch with switch 8008 and small actuator, padlockable with small actuator padlockable in 1 position > Contact arrngement (switch 8008) 8040/ , E00 Control switch with switch 8008 and small actuator, with small actuator > Contact arrngement (switch 8008) 8040/ , E00 Twin pushbutton 8040/ I/gn-060 0, E00 Diode indicating lamp and pushbutton, yellow,, 8040/ al-064 0, E00 9/3

4 Control Unit System 9 Diode indicating lamp and twin pushbutton, yellow,, 8040/ al I/gn/0/rt 0, E00 Ammeter 8405 Ammeter > Measurement range, see ammeter 8405 > Measuring methode (direct = d or converter = W) 8040/ , E00 Tripple pushbutton 8040/ I/gn II/gn-060 0, E E00 2 pushbuttons with indicating lamp, yellow,, 8040/ al I/gn-060 0, E E00 Twin pushbutton with mushroom stayput key release and indicating lamp, yellow,, 8040/ al I/gn/0/rt MS , E E00 9/4

5 9 Control Unit System Ammeter 8405 and control switch 8008, 2 pole Ammeter > Measurement range, see ammeter 8405 > Measuring methode (direct = d or converter = W) 8040/ , E00 Control switch 8008, 4 pole with large actuator 8040/ , E00 Control switch 8008, 4 pole and ammeter Control switch pole, with large rotary actuator, ammeter 8405 Ammeter > Measurement range, see ammeter 8405 > Measuring methode (direct = d or converter = W) 8040/ , E00 Control switch 8008, 4 pole and indicating lamp Control switch pole with large rotary actuator 8040/ al ,800 Indicating lamp 8010 >, yellow,, 05709E00 Technical Data Explosion protection Gas explosion protection E II 2 G EEx edmq ia / ib [ia / ib] IIC T6 Dust explosion protection E II 2 D IP 66 T80 C, T95 C Certificates Gas explosion protection PTB 01 ATEX 1105 Dust explosion protection LCIE 02 ATEX 6238 Other certificates Rated voltage Rated working current SIMTARS (Australia), CSA (Canada), UL (USA), VNIIEF (Russia), UL do Brasil (Brazil) max. 690 V, AC dependent on components used Ambient temperature - 20 C C - 50 C C on request 9/5

6 Control Unit System 9 Technical Data Cable entries Standard: 1 x M 25 x 1.5; cable gland 8161; side below (D); directly mounted into enclosure wall Special: in side C (top) and/or side D (below); 1 x M 20 x 1.5; 1 x M 25 x 1.5; metal cable glands are possible; mounting of metal cable glands in metal flange or via metal adapter plate Flanges Degree of protection IP 66 Material Housing Gaskets Cover fixing In standard design the enclosures are without flanges; On request they can be fitted with flanges on sides C and D. Flanges are available in: polyester resin or in brass, powder-coated, dark grey similar to RAL 7024 Polyester resin (glass fibre-reinforced) PU foam M 4, cheese head screws, imprescriptible, stainless steel Dimension drawings (all dimensions in mm) - subject to alterations 04582E E00 ConSig 8040/11 ConSig 8040/12 ConSig 8040/ E E00 a [mm] min. max. M M Additional dimensions for cable glands Series E E E00 Flange b [mm] Brass 16 Plastic 16 ConSig 8040/23 ConSig 8040/11 and ConSig 8040/12 combination Additional dimensions for flanges We reserve the right to make alterations to the technical data, weights, dimensions, designs and products available without notice. The illustrations cannot be conside binding. 9/6