Internationale normalisatie: Wat speelt er, wat heeft u eraan en hoe kunt u meedoen?
|
|
- Mabel Caldwell
- 7 years ago
- Views:
Transcription
1 Internationale normalisatie: Wat speelt er, wat heeft u eraan en hoe kunt u meedoen? Françoise de Jong & Jarno Dakhorst 1
2 Outline Introduction into standardization Organization of and participation in standardization ISO/TC 67 Intermezzo: Oil and gas standardization and regulation International standards for offshore structures What s next? Discussion 2
3 INTRODUCTION INTO STANDARDIZATION 3
4 Introduction into standardization (1) Standards are documents with agreements on products, services and systems... are designed for voluntary use... contribute to: (inter)national strength of competition innovation health, safety and environment image... are in accordance with WTO 4
5 Introduction into standardization (2) Overcoming trade barriers Vision ISO/TC 67 (oil & gas): Global standards used locally worldwide 5
6 Introduction into standardization (3) Standardization is an open process => all parties concerned invited to participate for broad support is developing agreements based on consensus => no sustained opposition is transparent => agreements are publicly available for comments and use takes place on three levels: national (e.g. NEN, DIN) regional (e.g. CEN, GSO) international (e.g. ISO, IEC) 6
7 ORGANIZATION OF AND PARTICIPATION IN STANDARDIZATION 7
8 Organization of and participation in standardization (1) Everyone who has an interest can participate All stakeholders + consensus creates broad support for established agreements 8
9 Organization of and participation in standardization (2) Stakeholder Input/influence (e.g. expert in working group) Stakeholder Stakeholder Stakeholder Mirror committee NC Standardization process ISO/TC 67 CEN/TC 12 Stakeholder Documents (e.g. draft standards) 9
10 Organization of and participation in standardization (3) 2 month ballot 3 months by default 2 months possible optional 2 months by default optional; 3 or 4 months possible 2 month translation (all ISO) 3 month ballot FDIS Opt in NP DIS Publication WD CD 3 tracks: Opt out Accelerated: 12 months to DIS and 24 months to publication Default: 24 months to DIS and 36 months to publication Enlarged: 36 months to DIS and 48 months to publication 10
11 Organization of and participation in standardization (4) Benefits of participation: Influence market developments (Inter)national technological and commercial network Faster and easier access to (inter)national markets New insights in innovation and development Positioning and adapting your business strategy Knowledge acquisition and sharing 11
12 Organization of and participation in standardization (5) Financing standardization: Different for each country In the Netherlands stakeholders pay a fee for participing in mirror committees and/or being an expert in international technical committees Fee may depend on extent of activities and number of members/experts Investment in standardization saves money by increasing interoperability, efficiency, safety, 12
13 ISO/TC 67 MATERIALS, EQUIPMENT AND OFFSHORE STRUCTURES FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES 13
14 ISO/TC 67 (1) Mission, vision & goals Mission: To create value-added standards for the oil and natural gas industries Vision: Global standards used locally worldwide Goals: Prepare standards required by this industry Prepare standards that are adopted worldwide by bodies such as ABNT (Brazil), API (USA), CEN (Europe), GOST R (Russian Federation), GSO (Gulf Region) and SAC (China) Prepare standards that are recognized by regulators Publish standards that enable companies to minimize their specifications Deliver standards to the target dates on the agreed work programme 14
15 ISO/TC 67 (2) Organization structure ISO/TC 67 Chair Management Committee Secretariat (NEN) SC 2 Pipeline transportation systems SC 6 Processing equipment and systems WG 2 Conformity assessment WG 8 Materials, corrosion control, welding and NDE SC 3 Drilling and completion fluids, and well cements SC 7 Offshore structures WG 4 Reliability engineering, and technology WG 10 LNG installations and equipment SC 4 Drilling and production equipment SC 8 Arctic operations WG5 Aluminium alloy pipes WG 11 Coating and lining of structures & equipment SC 5 Casing, tubing And drill pipe SC 9 LNG installations and equipment WG 7 Materials for use in H2S containing environments WG 12 CO2 aspects 15
16 ISO/TC 67 (3) Membership Key: Blue: Participation members (33) Orange: Observing members (33) 16
17 ISO/TC 67 (4) Portfolio Source: IOGP 17
18 INTERMEZZO OIL AND GAS STANDARDIZATION AND REGULATION 18
19 Oil and gas standardization and regulation WTO No barriers to trade TC ISO67 European E.g. Commission 2013/30/EU Directives Laws E.g. Dutch government Mijnbouwwet Legislation Draft mandate Mandates offshore oil & Standards gas industry Laws Regulation Standards Vienna agreement Standards TC CEN 12 NC NEN Standardization 19
20 INTERNATIONAL STANDARDS FOR OFFSHORE STRUCTURES 20
21 International standards for offshore structures (1) ISO/TC 67/SC 7 Standardization in the field of offshore structures used in the production and storage of petroleum and natural gas, including procedures for assessment of the site specific application of mobile offshore units. P-members: 23 O-members: 9 Work Program Number of published ISO standards under the direct responsibility of ISO/TC 67/SC 7 (number includes updates): 17 Currently 15 standards under development 21
22 International standards for offshore structures (2) ISO/TC 67/SC7 AG WG 1 WG 2 WG 3 WG 4 WG 5 WG 6 WG 7 WG 8 WG 9 Advisory group Strategy General requirements Regional annexes Fixed steel structures Fixed concrete structures Floating systems Weight engineering Site specific assessment of mobile offshore units (MOUs) Offshore Arctic structures Marine operations WG 10 Foundations WG 11 Offshore freight containers 22
23 International standards for offshore structures (3) ISO/TC 67/SC7 23
24 International standards for offshore structures (4) ISO series 24
25 International standards for offshore structures (5) Work programme 25
26 International standards for offshore structures (6) Work programme Active work items: , Metocean design and operating considerations [FDIS] , Seismic design procedures and criteria [WD] , Topsides structure [FDIS] , Geotechnical and foundation design considerations [DIS] , Weight control during engineering and construction [FDIS] , Marine operations [NP] , Stationkeeping systems for floating offshore structures and mobile offshore units [WD] , Structural Integrity Management [WD] 26
27 International standards for offshore structures (7) Work programme Active work items (continued): 19902, Fixed steel offshore structures [WD] , Monohulls, semi-submersibles and spars [DIS] , Floating units [WD] 19906, Arctic offshore structures [WD] 19903, Fixed concrete offshore structures [WD] , Jack-ups [FDIS] Offshore containers and associated lifting sets [DIS] > Part 1: Offshore container - Design, manufacture and marking > Part 2: Lifting sets - Design, manufacture and marking > Part 3: Periodic inspection, examination and testing 27
28 WHAT S NEXT? 28
29 What s next? (1) Consider to attend ISO/TC 67/SC 7 meeting in Delft on 11 & 12 March as observer [learn more about topics and meet experts from all over the world] Consider to become an expert in one or more ongoing standardization activities [benefit from participation in international standardization] 29
30 What s next? (2) NEN will check amongst experts and other stakeholders if there is interest in organizing periodic meetings related to offshore oil and gas standardization Possible advantages of such meetings: Information exchange Reports on progress and concerns of ongoing standardization activities and how to act on this Coordination to determine Dutch position and bring forward this position in international arena Identification of topics that would need new international standards or revision of existing ones 30
31 DISCUSSION 31
32 Discussion Are people interested in participating in work of ISO/TC 67/SC 7? Do people see merits in organizing national meetings on offshore oil and gas standardization? Are there ideas for topics that need standardization? [anything else one would like to discuss] 32
33 THANK YOU FOR YOUR ATTENTION 33
xxxxx Conformity assessment Requirements for third party certification auditing of environmental management systems - competence requirements
NEW WORK ITEM PROPOSAL Date of presentation 2011-02-25 Reference number (to be given by the Secretariat) Proposer ISO/TC 207/SC 2 ISO/TC 207 / SC 2 N 251 Secretariat NEN A proposal for a new work item
More informationBUSINESS PLAN CEN/TC 218 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 218 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES EXECUTIVE SUMMARY Business environment Rubber and plastics hoses and hose assemblies are used as flexible connections for the
More informationBenefits of participation in standards development and in the use of standards
Benefits of participation in standards development and in the use of standards WSC Academic Week 2010 Geneva 9 July 2010 Neil Reeve, ISO/TC67 Chair Shell Standards Manager 1 Purpose This presentation sets
More informationRegulations for bunkering LNG
Regulations for bunkering LNG CCNR round table LNG, 13-11-2012 Erik Büthker, chairman of Dutch standards committee LNG refuelling stations Discipline naam [1] Content Ballast Nedam What is a standard,
More informationISO 9001:2015 Revision overview
ISO 9001:2015 Revision overview December 2013 ISO/TC 176/SC 2/WG23 N063 1 Purpose of presentation To provide an overview of the revision of ISO 9001 which will be published in 2015 2 Background to this
More informationBUSINESS PLAN CEN/TC 54 UNFIRED PRESSURE VESSELS EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 54 UNFIRED PRESSURE VESSELS EXECUTIVE SUMMARY Business Environment CEN/TC 54 deals with a wide range of vessels for the energy and process industries that fall within the scope
More informationReference Standards for Vibration Monitoring and Analysis
Reference Standards for Vibration Monitoring and Analysis J Michael Robichaud, P.Eng. Bretech Engineering Ltd., 70 Crown Street, Saint John, NB Canada E2L 3V6 email: mike.robichaud@bretech.com website:
More informationISO/IEC/IEEE 29119 The New International Software Testing Standards
ISO/IEC/IEEE 29119 The New International Software Testing Standards Stuart Reid Testing Solutions Group 117 Houndsditch London EC3 UK Tel: 0207 469 1500 Fax: 0207 623 8459 www.testing-solutions.com 1 Stuart
More informationISO/TS/P 239 Remanufacturing of mechanical products
ISO Central Secretariat 1, ch. de la Voie-Creuse Case postale 56 CH - 1211 Genève 20 Switzerland Telephone + 41 22 749 01 11 Fax + 41 22 733 34 30 E-mail central@iso.org Web www.iso.org TS/P 239 TO THE
More informationISO 55001. Asset management. Management systems: Requirements. First edition 2014-01-15
ISO 55001 Asset management Management systems: Requirements First edition 2014-01-15 Our vision To be the world s leading provider of high quality, globally relevant International Standards through members
More informationUpdate on ISO TC 265 Transportation and
Update on ISO TC 265 Transportation and Tim Dixon IEA GHG R&D Programme CSLF Technical Group, 17 June 2015 Update on ISO TC 265 Transportation and 5th meeting was 26-30 January 2015 in Birmingham Alabama
More informationTS/P 247: Proposal to transform ISO/PC 251 Asset management into a TC
ISO/TMB/TS/P 247 2014-10-30 TS/P 247: Proposal to transform ISO/PC 251 Asset management into a TC Dear ISO Members, Please find attached a proposal for a new field of technical activity on Asset management,
More informationInternational standardization Arctic Operations (ISO TC67 SC8) Hermod Ole Johansen
International standardization Arctic Operations (ISO TC67 SC8) Hermod Ole Johansen Classification: Open Content Forming of Arctic Operations (ISO TC67 SC8) Scope for the international subcommittee Arctic
More informationForm 1: Proposal for a new field of technical activity
Form 1: Proposal for a new field of technical activity Circulation date: Click here to enter text. Closing date for voting: Click here to enter text. Proposer: ESMA Reference number (to be given by Central
More informationInternationale standarder
Internationale standarder Wim Elzink Wavin Overseas B.V. Netherlands Flemming Springborg Rørcentret Teknologisk Institut How to select the best rehabilitation option? 2 No no My solution is perfect for
More informationIOE Perspectives on the Development of an ISO OSH Management Standard IOE Member Communication (G-141) 1 pdf document (English only)
INTERNATIONAL ORGANISATION OF EMPLOYERS ORGANISATION INTERNATIONALE DES EMPLOYEURS ORGANIZACION INTERNACIONAL DE EMPLEADORES IOE Perspectives on the Development of an ISO OSH Management Standard IOE Member
More informationAsset Management Conformity Assessment Fitness for Service QHSE. Oil & Gas Services and Tools. For the benefit of business and people
Asset Management Conformity Assessment Fitness for Service QHSE Oil & Gas Services and Tools For the benefit of business and people Services along the whole life of Facilities Bureau Veritas services can
More informationCHINA OIL AND GAS PIPELINE STANDARD SYSTEM
THE FIFTEENTH U.S. - CHINA OIL AND GAS INDUSTRY FORUM CHINA OIL AND GAS PIPELINE STANDARD SYSTEM Wu, Zhongliang Petrochina Natural Gas and Pipeline Company 18 th September 2015 1 Report outline 1. Establishment
More informationPrivate Circulation Document: IST/35_07_0075
Private Circulation Document: IST/3_07_007 BSI Group Headquarters 389 Chiswick High Road London W4 4AL Tel: +44 (0) 20 8996 9000 Fax: +44 (0) 20 8996 7400 www.bsi-global.com Committee Ref: IST/3 Date:
More informationTECHNIP AT A GLANCE 2014
TECHNIP AT A GLANCE 2014 Unique range of activities A world leader in project management, engineering and construction for the energy industry S U B S E A OFFSHORE Subsea infrastructures, from deep to
More informationI NTERNATIONAL. Why industry specific?
ISO/TS 29001 set to become oil and gas industry s unique QMS standard Photo Hydro A successful partnership between ISO and the international oil and gas industry has resulted in the publication of a new
More informationGuidance for ISO liaison organizations Engaging stakeholders and building consensus
Guidance for ISO liaison organizations Engaging stakeholders and building consensus ISO in brief ISO is the International Organization for Standardization. ISO has a membership of 163* national standards
More informationISO 9001 & ISO 14001 Revisions what will change, and why?
ISO 9001 & ISO 14001 Revisions what will change, and why? Hong Kong November / December 2014 Dr Nigel H Croft Chairman, ISO/TC 176/SC 2 (Quality Systems) Member, ISO Joint Technical Coordination Group
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-1 First edition 2001-12 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions Unités fixes et mobiles en mer Installations
More informationNew work item proposal Occupational health and safety management systems - Requirements
ISO Central Secretariat 1, ch. de la Voie-Creuse Case postale 56 CH - 1211 Genève 20 Switzerland Telephone + 41 22 749 01 11 Fax + 41 22 733 34 30 E-mail central@iso.org Web www.iso.org TMB / NWIP TO THE
More informationMandate M-403: ehealth Interoperability. Karl Øyri Intervensjonseteret, Rikshospitalet HF
Mandate M-403: ehealth Interoperability Karl Øyri Intervensjonseteret, Rikshospitalet HF M-403: Mandate to the European Standardisation Organisations CEN, CENELEC and ETSI in the field of Information
More informationSHIPS AND OFFSHORE STRUCTURES Offshore Structure Design And Construction Paul A Frieze OFFSHORE STRUCTURE DESIGN AND CONSTRUCTION
OFFSHORE STRUCTURE DESIGN AND CONSTRUCTION Paul A Frieze PAFA Consulting Engineers, UK Keywords: Jacket structures, topsides, design, construction, metocean, geotechnical, loads, load combinations, piling,
More informationINTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT
INTRODUCTION TO ISO 9001 REVISION - COMMITTEE DRAFT AGENDA Introduction Annex SL Changes to ISO 9001 Future Development How SGS can support you 2 INTRODUCTION ISO 9001 Revision Committee Draft Issued 2013
More informationImproving international and European healthcare standardization to meet global safety, regulatory and market needs
Improving international and European healthcare standardization to meet global safety, regulatory and market needs A discussion paper from EUCOMED Executive Summary This paper has been produced in order
More informationINTERNATIONAL TERMINOLOGY STANDARDIZATION. reasons, institutions, results, implementation. Anja Drame
INTERNATIONAL TERMINOLOGY STANDARDIZATION reasons, institutions, results, implementation Anja Drame The objective of this presentation is to illuminate 4 basic general questions concerning terminology
More informationForeword... 11 Introduction - The Global Food Safety Initiative (GFSI)... 11 Scope... 12 Section Overview... 12 Normative References...
Version 6.3 Overview Contents Foreword... 11 Introduction - The Global Food Safety Initiative (GFSI)... 11 Scope... 12 Section Overview... 12 Normative References... 13 9 Foreword Global Food Safety Initiative
More informationCharles Corrie, Belo Horizonte, 2013-03 2
ISO Management System Standards, ISO 9001 and the Future Charles Corrie Secretary ISO/TC 176/SC 2 Established Management (system) standards ISO 9000 Quality ISO 14000 Environment IEC 60300 Dependability
More informationTECHNICAL BOARD BT N 9776. Draft BT C135/2014. CEN/BT by correspondence. For vote Issue date: 2014-11-19
BT N 9776 Draft BT C135/2014 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2014-11-19 Simultaneous circulation to CENELEC/BT Deadline: 2015-02-17 SUBJECT Creation of a new CEN/TC Private
More informationEUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Innovation policy Technology for innovation; ICT industries and E-business Brussels, 7 th December 2005 DG ENTR/D4 M 376 - EN STANDARDISATION
More informationInternet of Things - Internet of the Future" Workshop in Oslo 2012 02 01
Internet of Things - Internet of the Future" Workshop in Oslo 2012 02 01 The IoT Value Creation Network, Norway Project in the VERDIKT-program The Research Council of Norway Today s Focus CEN and Internet
More informationISO 9001: 2015 EXPECTATIONS OVERVIEW & Presenter Name Paul J. Kunder. Former US Representative to ISO 20 Yrs. Voting Member USTAG - TC 176
OVERVIEW & EXPECTATIONS Presenter Name Paul J. Kunder Former US Representative to ISO 20 Yrs. Voting Member USTAG - TC 176 Purpose Of Presentation To provide an overview 9000:2015 9001:2015 Estimated Release
More informationCouncil of the European Union Brussels, 20 May 2016 (OR. en)
Council of the European Union Brussels, 20 May 2016 (OR. en) 8673/1/16 REV 1 ER 141 CLIMA 43 NOTE From: To: Subject: General Secretariat of the Council Delegations Political declaration on energy cooperation
More informationCEN TC 10 (Lifts, escalators and moving walks) Overview of the EN 81 series of standards + Short introduction to the revision of EN 81-1 & EN 81-2
CEN TC 10 (, escalators and moving walks) Overview of the EN 81 series of standards + Short introduction to the revision of EN 81-1 & EN 81-2 Agoria - 20 th March, 2012, with thanks to CEN TC 10 Content
More informationEurocodes, history and present
in the Euro-Mediterranean Area The Eurocodes, history and present Jean-Armand CALGARO Ingénieur nieur Général G des Ponts et Chaussées Conseil Général G des Ponts et Chaussées Ecole nationale des Ponts
More informationISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Pretoria, South Africa
ISO/TC 258, ISO Technical Committee for Project, Program, and Portfolio Management, convenes in Pretoria, South Africa By jouko.vaskimo@aalto.fi ISO/TC 258, the Technical Committee (TC) of the International
More informationResolutions adopted by the Technical Management Board at its 22nd meeting in Geneva on 5-6 June 2001
TMB Secretariat 6 June 2001 Resolutions adopted by the Technical Management Board at its 22nd meeting in Geneva on 5-6 June 2001 Technical Management Board resolution 34/2001 Guide on management system
More informationIntroduction BAM and Van Oord GBF - Concrete Centre Conference, December 2012
Introduction BAM and Van Oord have teamed up to Design, Manufacture and install reinforced concrete gravity base foundations (GBFs) for the offshore wind industry. The concept for the GBF has been developed
More informationISO 19600: The development
1 Baltzer Science Publishers ISO 19600: The development of a global standard on compliance management By Sylvie Bleker and Dick Hortensius* It has been a traditional complaint of the global compliance
More informationSTRATEGIC BUSINESS PLAN ISO/TC 279
STRATEGIC BUSINESS PLAN ISO/TC 279 Page: 1 Yes we can innovate through standardisation. EXECUTIVE SUMMARY Standardization does not mean cloning. Standards on innovation management will allow organisations
More informationNavigating ISO 14001:2015
Navigating ISO 14001:2015 Why the new ISO 14001 revision matters to everyone White paper Abstract This white paper takes a concise, yet detailed look at the upcoming ISO 14001:2015 revision. The revision
More informationIAF Informative Document. Transition Planning Guidance for ISO 9001:2015. Issue 1 (IAF ID 9:2015)
IAF Informative Document Transition Planning Guidance for ISO 9001:2015 Issue 1 (IAF ID 9:2015) Issue 1 Transition Planning Guidance for ISO 9001:2015 Page 2 of 10 The (IAF) facilitates trade and supports
More informationInformation Technology
Information Technology ISO/IEC JTC 1 N6383 Date: 2001-02-08 Replaces: Document Type: Document Title: Document Source: Information from ISO Central Secretariat (Defined) Resolutions Adopted by the ISO Technical
More informationISO/IEC Directives Part 1
ISO/IEC DIR 1 ISO/IEC Directives Part 1 Edition 11.0 2014-05 colour inside CONTAINS THE FINAL VERSION AND THE REDLINE VERSION Procedures for the technical work ISO/IEC DIR 1:2014(EN) THIS PUBLICATION IS
More informationCustomer environment. Customers
Customer environment Customers GS-Hydro s non-welded piping systems are used in a number of applications in the offshore market. Drilling packages, ring lines, different types of cranes & winches are typical
More informationPresentation at the 3 rd SAFOODNET seminar
Sense and nonsense in standardisation Dr Rijkelt Beumer Laboratory of Food Microbiology Wageningen University (NL) Standardisation is a process in which on national, European or mondial level agreements
More informationDisseminating ISO Documents to National Mirror Committees
Disseminating ISO Documents to National Mirror Committees Disseminating ISO Documents to National Mirror Committees ISO in brief ISO is the International Organization for Standardization. It has a membership
More informationCOMMITTEE ON STANDARDS AND TECHNICAL REGULATIONS (98/34 COMMITTEE)
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulatory Policy Standardisation Brussels, 9 th November 2005 Doc.: 34/2005 Rev. 1 EN COMMITTEE ON STANDARDS AND TECHNICAL REGULATIONS (98/34
More informationInternational Organization for Standardization TC 215 Health Informatics. Audrey Dickerson, RN MS ISO/TC 215 Secretary
International Organization for Standardization TC 215 Health Informatics Audrey Dickerson, RN MS ISO/TC 215 Secretary 1 Topics Introduction to ISO TC 215, Health Informatics Definitions Structure Membership
More informationA stakeholder s. guide. Consultation for ISO Strategy 2016-2020
Strategy A stakeholder s guide Consultation for ISO Strategy 2016-2020 ISO Strategy 2016-2020 What is the ISO Strategy 2016-2020? The ISO Strategy 2016-2020 is the strategic plan for the organization
More informationIdentity Management Initiatives in identity management and emerging standards Presented to Fondazione Ugo Bordoni Rome, Italy
Identity Management Initiatives in identity management and emerging standards Presented to Fondazione Ugo Bordoni Rome, Italy November 18, 2008 Teresa Schwarzhoff Computer Security Division Information
More informationTRAINING AND PROMOTION OF THE EUROCODES
TRAINING AND PROMOTION OF THE EUROCODES Support to the implementation, harmonization and further development of the Eurocodes H. Gulvanessian, A. Pinto, S. Dimova, G. Tsionis, M. Geradin EUR 22857 EN -
More informationla conception et l'exploitation d'un système électroniques
Philippe NEW WORK ITEM PROPOSAL SC3 MARTIN 171 1 Date of presentation Reference number 2008/07/29 (to be given by the Secretariat) Proposer ISO/TC / SC N Secretariat 170 A proposal for a new work item
More informationSector Forum i Europa New proposals for Standards. Dr. Bernard GINDROZ, SFEM Chair
Sector Forum i Europa New proposals for Standards Dr., SFEM Chair Agenda 1. European and International Standards Organizations 2. CEN/CENELEC Sector Forum Energy Management About CEN and CENELEC SFEM :
More informationSelection and use of ISO 9000
Selection and use of ISO 9000 ISO in brief ISO is the International Organization for Standardization. It is made up of national standards institutes from countries large and small, industrialized and developing,
More informationÖNORM EN 1504-8. The European Standard EN 1504-8 has the status of an Austrian Standard. Edition: 2005-02-01. Standards group B
ÖNORM EN 1504-8 Edition: 2005-02-01 Standards group B Identical (IDT) with EN 1504-8:2004 ICS 91.080.40 Products and systems for the protection and repair of concrete structures Definitions, requirements,
More informationEnvironmental management. The ISO 14000 family of International Standards
The ISO 14000 family of International Standards ISO in brief ISO and the environment ISO is the International Organization for Standardization. It has a membership of 160 national standards institutes
More informationCSA Group Safety Standards for Oil and Gas Pipeline Systems: A Life-Cycle Approach
CSA Group Safety Standards for Oil and Gas Pipeline Systems: A Life-Cycle Approach Greg Orloff, MBA Government Relations Officer North America and Europe CSA Group Z662 Technical Committee (TC) Over 250
More informationIndustry use of Standards and how PPM fits with those Standards
Industry use of Standards and how PPM fits with those Standards Wolfgang Kresse EuroSDR, ISO/TC 211 Germany kresse @hs-nb.de 1 What is the legal status of a standard? ISO International Organization for
More informationEuropean Standards Benefits and challenges. Per Kr Andersen Convenor CEN TC 239 WG 1 and 5 Senior adviser Norwegian Directorate of Health
European Standards Benefits and challenges Per Kr Andersen Convenor CEN TC 239 WG 1 and 5 Senior adviser Norwegian Directorate of Health 1 European standards Benefits and challenges Standards is an important
More informationSelection and use of the ISO 9000 family of standards
Selection and use of the ISO 9000 family of standards ISO and international standardization ISO/TC 176, Quality management and quality assurance ISO is the International Organization for Standardization.
More informationHitecVision Private Equity AS
HITEC VISION HitecVision Private Equity AS First six months 2006 HitecVision Private Equity AS 1 st half year 2006 HitecVision has had a good six months. Some highlights are: Operating revenues of NOK
More informationGE Oil & Gas. Air Cooled Heat Exchangers. Robust and reliable for all loads and applications
GE Oil & Gas Air Cooled Heat Exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
More informationPreparation for ISO 45001 OH&S Management Systems
Preparation for ISO 45001 OH&S Management Systems HEALTH & SAFETY MANAGEMENT QUALITY MANAGEMENT ACCESSIBILITY ENVIRONMENTAL MANAGEMENT ENERGY MANAGEMENT ISO 45001 TIMELINE ISO project committee ISO PC
More informationAPI Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
More informationSubsea Standard & Rules What is Subsea?
Subsea Standard & Rules What is Subsea? MEK4450 Standards and Rules Bjørn Søgård, Anders Husby Goals General knowledge of subsea development and production systems Understand the building blocks forming
More informationContact address: Global Food Safety Initiative Foundation c/o The Consumer Goods Forum 22/24 rue du Gouverneur Général Eboué 92130 Issy-les-Moulineaux
Version 6.3 Contact address: Global Food Safety Initiative Foundation c/o The Consumer Goods Forum 22/24 rue du Gouverneur Général Eboué 92130 Issy-les-Moulineaux France Secretariat email: gfsinfo@theconsumergoodsforum.com
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationPlatform Technologies for Offshore Renewable Energy Conversion Diego Vannucci, RINA
Platform Technologies for Offshore Renewable Energy Conversion Diego Vannucci, RINA Objectives DON T RE-INVENT THE WHEEL! Oil & Gas Industry has been developing offshore technology for 100 years., is there
More informationFINAL DRAFT PREN ISO 14327 RESISTANCE WELDING PROCEDURES FOR DETERMINING THE WELDABILITY LOBE FOR RESISTANCE SPOT, PROJECTION AND SEAM
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG CEN/TC 121 N 1060 FINAL DRAFT PREN ISO 14327 RESISTANCE WELDING PROCEDURES FOR DETERMINING THE WELDABILITY
More informationTechnip Offshore Finland
Technip Facilities Technip Offshore Finland Construction yard Technip Profile Listed on Euronext Paris Revenues: 7.9 billion euros in 2007 23,000 people worldwide One of the five world leaders in engineering,
More informationAPI FORUM (21 st March 2013) MIDA
API FORUM (21 st March 2013) MIDA 1 About MIDA Oil & Gas Industry in Malaysia Business & Investment Opportunities Incentives for Investment Domestic Investment Strategic Fund 2 First point of contact for
More informationHorizon Survey and Geotechnical Companies
Oil & Gas Directory Middle East - 2013 147 Horizon Survey and Geotechnical Companies Corporate P r ofile OUR PEDIGREE Horizon provides comprehensive survey and geotechnical services to the offshore industry
More informationCEN/BT/WG 215 N 045 4 th draft BUSINESS PLAN
CEN/BT/WG 215 N 045 4 th draft BUSINESS PLAN CEN/TC XXX Building Information Modelling (BIM) CEN/TC XXX Business Plan Date:2014-09-16 Version: Draft #7 Page: 1 EXECUTIVE SUMMARY Business Environment [to
More informationStandards and accreditation. Tools for delivering better regulation
Standards and accreditation Tools for delivering better regulation Introduction Standards and accreditation are marketbased tools that can be used by Government policy makers to deliver better regulation.
More informationTTIP The Energy Conundrum Cheap or Clean?
TTIP The Energy Conundrum Cheap or Clean? Vasile Iuga 16 October 2015 Current position EU US Energy Demand Flat Growing Dependency on Imports 53% and growing 400 bln / annum Net export by 2017 Domestic
More informationTHE Quality Label for Solar Thermal Products in Europe
The Solar Keymark CEN Keymark Scheme THE Quality Label for Solar Thermal Products in Europe Boost your solar thermal business www.solarkeymark.org 2 3 The Solar Keymark, the main quality label for solar
More informationISO Strategic Plan 2011-2015. Solutions to Global Challenges
ISO Strategic Plan 2011-2015 Solutions to Global Challenges ISO the International Organization for Standardization ISO has a membership of 163* national standards bodies from countries large and small,
More informationElectrical Safety in Oil & Gas Industries Challenges & Solutions for Industrializing Countries
IEC SYSTEM FOR CERTIFICATION TO STANDARDS RELATING TO EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES Electrical Safety in Oil & Gas Industries Challenges & Solutions for Industrializing Countries Patrick Leroux
More informationEvaluation de la conformité Exigences pour l'audit tierce partie en vue de la certification de systèmes de management
COMMITTEE DRAFT ISO/IEC CD 17021-2 Date 2008-02-11 Supersedes document Reference number CASCO 03/2008 WARNING: This document is not an International Standard. It is distributed for review and comment.
More informationWorld Energy Outlook. Dr. Fatih Birol IEA Chief Economist Paris, 27 February 2014
World Energy Outlook Dr. Fatih Birol IEA Chief Economist Paris, 27 February 2014 The world energy scene today Some long-held tenets of the energy sector are being rewritten Countries are switching roles:
More informationWhat is ATEX? The European Regulatory Framework for Manufacture, Installation and Use of Equipment in Explosive Atmospheres
What is ATEX? The European Regulatory Framework for Manufacture, Installation and Use of Equipment in Explosive Atmospheres Ron Sinclair MBE Chair IECEx ExTAG ATEX? ATEX = Atmosphères Explosibles ATEX
More informationUEMS 2004 / 47 EN ADOPT ED
EUROPEAN UNION OF MEDICAL SPECIALISTS Kroonlaan 20 Avenue de la Couronne tel: +32-2-649.51.64 B-1050 - BRUSSELS fax: +32-2-640.37.30 www.uems.net uems@skynet.be NEW STATUTES UEMS 2004 / 47 EN ADOPT ED
More informationStrategic Plan for Control Period 5, 2014 2019. Issue Two 2015-2016
Infrastructure Standards Committee Strategic Plan for Control Period 5, 2014 2019 Issue Two 2015-2016 Approved by the Infrastructure Standards Committee 05 March 2015 ISCC/020 Email: enquirydesk@rssb.co.uk
More informationISO 14000 Meet the whole family!
ISO 14000 Meet the whole family! ISO in brief ISO is the International Organization for Standardization. It is made up of national standards institutes from countries large and small, industrialized and
More informationDe Nieuwe Code voor Informatiebeveiliging
De Nieuwe Code voor Informatiebeveiliging Piet Donga, ING Voorzitter NEN NC 27 - IT Security 1 Agenda Standardisation of Information security The new Code of Practice for Information Security The Code
More informationSDO Plan of Action for Global Health Informatics Standards SDO Harmonization Model and SDO Global Liaison Group (Initial Terms of Reference)
SDO Plan of Action for Global Health Informatics Standards SDO Harmonization Model and SDO Global Liaison Group (Initial Terms of Reference) (Lead: Don Newsham, ISO / TC215) V0.2, Initial Working Draft,
More informationTraining in international standardization. Services offered by the ISO Central Secretariat
Training in international standardization Services offered by the ISO Central Secretariat 2010 How to win in the knowledge economy ISO members who make the most of the various training courses that are
More informationFASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) IRISH STANDARD I.S. EN ISO 3269:2000. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN ISO 3269:2000 ICS 21.060.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 FASTENERS - ACCEPTANCE INSPECTION (ISO 3269:2000) NSAI
More informationStatus of the ISO 55000 Asset Management System Standard
Status of the ISO 55000 Asset Management System Standard Michael E. Poland, CMRP Board Member, ANSI Corporate Member, IAM Director of Asset Management, Life Cycle Engineering ISO 55000 Asset Management
More information7 th Conference on Flat Bottom Tanks International
International Conferences 7 th Conference on Flat Bottom Tanks International Conference October 19 20, 2010, Munich, Germany The conference is supported by: TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie
More informationAdvantages of our solution
Introduction BAM and Van Oord have teamed up to design, manufacture and install reinforced concrete gravity base foundations (GBFs) for the offshore wind industry. The concept for the GBF has been developed
More informationOIL & MARINE PRODUCT RANGE. Dock & onshore Floating roof tank drain Mooring Rig supply
OIL & MARINE PRODUCT RANGE Dock & onshore Floating roof tank drain Mooring Rig supply ALFAGOMMA GROUP A SUCCESS STORY Alfagomma Group, founded in 1956, is a result of a continuous and successful growth:
More informationJan-Henrik Tiedemann jti@iec.ch. IEC Community Services & Support Manager INTERNATIONAL ELECTROTECHNICAL COMMISSION
Jan-Henrik Tiedemann jti@iec.ch IEC Community Services & Support Manager INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Technical Services Topics TISS Consultations 2013 Training Workshops IEC Tools / myiec
More information