Arathane. Filled and unfilled polyurethane/pu casting resin

Transcription

1 Arathane Filled and unfilled polyurethane/pu casting resin

2 Polyurethane casting resin / PUR resin Electronic encapsulating / Electric encapsulating The following product overview covers PU casting resins for electrical and electronical applications. These materials are used as electrical sealing compounds or electronics sealing compound assigned for casting of construction units and building blocks. Typical requirements for the use of casting resins are isolation abilities, humidity protection, resistance to thermal shocks, self-extinguishing characteristics according UL 94 V0 (UL V0), Know How protection, heat dissipation and much more beside these. Short description with the substantial characteristics of the PU casting: Arathane CW 5620/HY 5610 UL 94 V0, thermal class B (130 C), Shore A 80 The casting resin is very well usable under standard atmosphere. It has an excellent capillary and flow characteristics. It is used usually as casting resin of electronics building groups and is available in blue color and anthracite coal (almost black). Availability: 1kg, 25kg and 250kg packaging Arathane CW 5650/HY 5610 UL 94 V0, thermal class E (120 C), Shore A 78, Tg -47 C The PU casting resin is temperature flexible and therefore particularly well for change of climate-stressed and course-sensitive construction units like e.g. SMD devices. The heat conductivity with 0,5 W/m*K provides the necessary heat dissipation. Availability in grey: 25kg, 250kg and 1000kg packaging Arathane XW 949-1/HY 5610 thermal class B (130 C), Shore A 60, Tg -62 The casting resin is characterized by its high flexibility at low temperatures. The less water absorption with simultaneous flexibility and the good adhesive properties are most important. This product is in charge as sealing compound in sensoric systems. As unfilled PUR casting resin with a density of 1.0g/cm3 it is comparatively light and can with the heat conductivity from approx. 0,1W/m*K be used for thermal insulation. Availability in blue: 25kg packaging Arathane CW 3200/HY thermal class E (120 C), Shore A 83 The casting resin is very convenient and favorably used therefore for large volume applications. The casting compound is hard and tough. Availability in beige: 25kg, 250kg packaging

3 Arathane XB 5633/HY 5610 UL 94 V0, thermal class B (130 C), Shore A 89 The casting resin is similar to CW 5620/HY 5610 but possesses however a higher heat conductivity of 0,63 W/m*K. It finds a typical way of application as electronics encapsulating compound e.g. for transformers. Availability in black: 25kg packaging Arathane VB U 6920/U001B UL 94 V0, thermal class F (155 C), Shore D 60-70, Tg +60 C The casting resin is used for condensers. It has a very short gel time and makes possible high-productive processes. The casting compound is characterized by a low dielectric constant in a large temperature range. Availability in white: 250kg packaging Arathane VB U 6910 ACC/HY UL 94 V0, thermal class F (155 C), Shore D 60-70, Tg +60 C Similar to VB U 6920/U001B this sealing compound is used for condensers. By the somewhat slower gel time the casting resin is perfect for larger casting volumes per construction. The PU casting resin is very inexpensive. Availability in black: 1400kg IBC container Arathane VB U 6942 /VB U001B UL 94 V0, thermal class E (120 C), Shore A 82, Tg +55 C The casting resin is used e.g. for casting of cost sensible electronic devices. It is poured under standard atmosphere. Availability in black: 25kg, 250kg and 1400kg container Availability in beige: 250kg packaging Arathane CW 5631/HY 5610 UL 94 V0, thermal class F (155 C), Shore D80, Tg +47 C This PUR casting resin is used e.g. for the stator casting of engines or in explosion protected applications. Availability in black: 1kg and 25kg packaging If one of the indicated package sizes fit not to your conceptions please call us, Phone: 069/ and speak to our technical Sales they will be able to deal with your requirements.

4 Arathane : fill and unfilled polyurethane/pu casting resin CW 5620 CW 5620 XW System resin CW 5620 CW 5650 CW XB 5633 U 6920 U 6910 ACC U 6942 CW 5631 ACC2 ACC5 blue hardener HY 5610 HY 5610 HY 5610 HY 5610 HY 5610 HY HY 5610 U 001B HY U 001B HY 5610 Type of System PU/filled PU/filled PU/filled PU/filled PU/unfilled PU/filled PU/filled PU/filled PU/filled PU/filled PU/filled Color black blue blue grey blue black withe black beige/black/reblack Density of casting g/cm Filler content resin % Mixing ratio resin/hardener parts by weight 100/22 100/22 100/22 (15-24) 100/11 100/50 100/15 100/20 100/25 100/25 100/16 100/25 resin/hardener parts by volume 100/25 100/13 100/50 100/20 100/25 100/33 100/33 100/19 100/30 Viscosity resin mpas/ C 2500 / / / / / / / / / / /25 hardener 90 / / / / / / / / / /25 90 / 25 mixture mpas/25 C 1300 n.a. n.a / mpas/ C 1600/ / /60 Pot life min / C / mpas 25/25/5000 n.a. n.a. 15/25/ /25/ /25/ /25/ /25/ /23/ /25/ /40/ /40/5000 Gel time min/ C 70 / 25 2 / / / / / / / /23 60 / / / / 60 Minimum curing time 24 / 25 or 6 / 24 / 25 or 6 / 24 / 25 or 6 / 24 / 25 or 6 / 24 / 25 or 6 / 24 / 25 or 6 / 24 / 25 or 6 / 24/25 or 24 / 25 or 6 / 24 / 25 or 6 / h/ C / Glass transition temperature (DSC) C < Martens deflection temperature C Thermal conductivity 25 C W/mK ,77 0, Coefficient of linear thermal expansion ppm/k 43@Alpha1 162@Alpha C Alpha1 Alpha2 60@Alpha1 135@Alpha2 Thermal class B (130 C) B (130 C) B (130 C) E (120 C) B (130 C) B (130 C) B (130 C) F (155 C) E (120 C) F (155 C) @Alpha1 135@Alpha2 Shore hardness 23 C Shore D ( D14-47@ A / 83 D40/A /- D40/A87 80 ppw100/15-24) Flammability UL 94 grade V-0 (6mm) V-0 (6mm) V-0 (6mm) V-0 (6mm) - V-0 (6mm) V-1 (5mm) V-0 (6mm) V-0(6,4mm) V-0 (6mm) Glow-wire test (850 C) IEC IEC Flexural strenght max bending stress 25 C MPa surface strain failure 25 C % 27 Modulus of elasticity 25 C MPa Tensile stength max bending stress 25 C MPa surface strain failure 25 C % Modulus of elasticity 25 C MPa Impact strength kj/m Water absorption 23 C days / % 1 / / / / / / / / /0.2 1 / / C min / % 30 / / / / / / / / / 0.3 Dielectric strenght kv/mm Jan Dielectric dissipation factor tan δ (50 Hz) 23 C % C % Relative permittivity ε r (50 Hz) 23 C C 8-9/70 C Volume resistivity ρ 25 C Ohm cm 1 x x x x x x x x x x x C Ohm cm Tracking resistance CTI CTI >600 >600 >600 >600 >600 <1 Electrolytic corrosion grade A-1 A-1 A-1 A-1

5 with kind regards Switzerland Bodo Möller Chemie Schweiz AG General Guisan-Str. 11 CH-8401 Winterthur Tel.: +41 (0) Fax: +41 (0) France Bodo Möller Chimie France SAS 22 Rue Pierre Martin F Le Mans Tel: +33 (0) Fax: +33 (0) Benelux Bodo Möller Chemie Benelux N.V. Vosseschijnstraat 40, Haven 140 B-2030 Antwerpen Tel: +32 (0) Fax: +32 (0) Southern Africa /Sub Sahara Region Bodo Möller Chemie South Africa (PTY) Ltd. Block B, Walmer Park Suites, 16th Ave., ZA-6070, Walmer, Port Elizabeth Tel: +27 (0) Fax: +27 (0) Germany Bodo Möller Chemie GmbH Senefelderstraße D Offenbach/Main Tel: +49 (0) Fax: +49 (0) info@bm-chemie.de Austria Bodo Möller Chemie Austria GmbH Am Hafen 6 A-2100 Korneuburg Tel: +43 (0) Fax: +43 (0) info@bm-chemie.at Poland Bodo Möller Chemie Polska Sp. z o.o. Ul. Naramowicka 150 PL Poznań Tel: Fax: info@bm-chemie.pl Denmark Bodo Möller Kemi Danmark Aps Dam Holme DK-3660 Stenlose Tel: Fax: info@bm-kemi.dk All recommendations for use of our products, whether given by us in writing, verbally, or to be implied from the results of tests carried out by us, are based on the current state of our knowledge. Notwithstanding any such recommendations the Buyer shall remain responsible for satisfying himself that the products as supplied by us are suitable for his intended process or purpose. Since we cannot control the application, use or processing of the products, we cannot accept responsibility therefore. The Buyer shall ensure that the intended use of the products will not infringe any third party's intellectual property rights. We warrant that our products are free from defects in accordance with and subject to our general conditions of supply. Mandatory and recommended industrial hygiene procedures should be followed whenever our products are being handled and processed. For additional information, please consult the corresponding product safety data sheets. Finland Bodo Möller Chemie Nordic Oy Kauppakartanonkatu 7A FI Helsinki Tel: +358 (9) Fax: +358 (9) info@bm-chemie.fi Sweden Bodo Möller Chemie Sweden AB Önnereds Brygga 7 SE Västra Frölunda Tel: +46 (31) Fax: +46 (31) info@bm-chemie.se Czech & Slovakia Bodo Möller Chemie Czech & Slovakia, s.r.o. Bohrova 1 SK Bratislava Tel: +421 (2) Fax: +421 (2) info@bm-chemie.sk, info@bm-chemie.cz