ITT. Goulds Pumps 33GS, 40GS, 55GS, 60GS, 75GS & 80GS. Engineered for life B33-80GS. Residential Water Systems FEATURES

Transcription

1 B33-8GS ITT Residential Water Systems Goulds s 33GS, 4GS, 55GS, 6GS, 75GS & 8GS 33-8, 1 1 HP, 6 Hz, Submersible s Goulds s is a brand of ITT Corporation. Engineered for life FEATURES n Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. can be operated continuously without damage to the motor. n Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts. n Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 4 years as a superior sand handling, durable pump design. n FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic. n Discharge Head/Check Valve: Cast 33 stainless steel for strength and durability. Two castin safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation. n Motor Adapter: Cast 33 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench. n Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant. n Hex Shaft Design: Six sided shafts for positive impeller drive. n Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The upper bearing is mounted in a durable engineered composite bearing spider for excellent abrasion resistance.

2 WATER END DATA Series Required H.P. Stages Water End Length (in) Wt (lbs) 33GS GS GS GS 33GS GS GS GS GS GS GS 4GS GS GS GS GS GS 55GS GS GS GS GS GS GS 6GS GS GS GS GS 75GS GS GS GS GS 8GS GS NOMENCLATURE SOLD AS WATER ENDS ONLY SPECIFICATIONS Flow Horse- Best Discharge Minimum Range power Efficiency Well Range Connection Size Rotation 1 33GS CCW 4GS ½ 7½ CCW 55GS 2 8 1½ CCW 6GS 4 8 1½ 7½ CCW 75GS CCW 8GS ½ CCW 1 Rotation is counterclockwise when observed from pump discharge end. GS SERIES MATERIALS OF CONSTRUCTION Part Name Material Discharge Head AISI 33 SS Check Valve Poppet AISI 34 SS Check Valve Seal BUNA, FDA compliant Check Valve Seat AISI 34 SS Check Valve Retaining Ring AISI 32 SS Bearing Spider Upper Glass Filled Engineered Composite Bearing Proprietary Engineered Polymer Klipring AISI 31 SS Diffuser Lexan Impeller Noryl Bowl AISI 34 SS Intermediate Sleeve* AISI 34 SS, Powder Metal Intermediate Shaft Coupling* AISI 34 SS, Powder Metal Intermediate Bearing Spider* Glass Filled Engineered Composite Intermediate Bearing Spider* AISI 33 SS Shim AISI 34 SS Screws Cable Guard AISI 34 SS Motor Adapter AISI 33 SS Casing AISI 34 SS Shaft AISI 34 SS, 1-3 HP; 17/4 PH, 5-1 HP Coupling AISI 34 SS, Powder Metal Cable Guard AISI 34 SS Suction Screen AISI 34 SS *See repair parts for where used. DISCHARGE 2" NPT 33 GS 2 at Best Efficiency 33, 4, 55, 6, 75, 8 GS Series Horsepower Code 15 = 1 1 / 2 2 = 2 3 = 3 5 = 5 75 = 7 1 / 2 1 = 1 W.E. 3.9" Effective diameter with cable guard 3.75" MOTOR 2

3 CENTRIPRO 4" SINGLE-PHASE MOTORS Order No. Type HP Volts Length Weight in. (mm) lb. (kg.) M wire (337) 24.5 (11.1) 23 M15422 PSC (378) 28.9 (13.1) M (297) 23.1 (1.5) M (345) 27.4 (12.4) M wire (383) 31. (14.1) M (466) 4. (18.1) M (73) 7. (31.8) CENTRIPRO 4" THREE-PHASE MOTORS Order No. HP Volts Length Weight in. (mm) lb. (kg.) M (297) 22 (1.4) M (297) 22 (1.4) M (351) 28 (12.7) 2 M (389) 32 (14.5) M (55) 55 (24.9) M (73) 7 (31.8) M (297) 23 (1.4) M (297) 23 (1.4) M (351) 28 (12.7) 23 M (389) 32 (14.5) M (55) 55 (24.9) M (73) 7 (31.8) M (297) 23 (1.4) M (297) 23 (1.4) M (351) 28 (12.7) 46 M (389) 32 (14.5) M (55) 55 (24.9) M (73) 7 (31.8) M (297) 23 (1.4) M (389) 32 (14.5) M (389) 32 (14.5) M (73) 7 (31.8) M (73) 7 (31.8) NEMA MOTOR Corrosion resistant stainless steel construction. Built-in surge arrestor is provided on single phase motors through 5 HP. Stainless steel splined shaft. Hermetically sealed windings. Replaceable motor lead assembly. CSA certified. UL 778 recognized. NEMA mounting dimensions. Control box is required with 3 wire single phase units. Three phase motors require a magnetic starter with Class 1 overload protection. AGENCY LISTINGS All factory assembled, complete pump/motor assemblies are UL778 and CSA listed. All pumps and motors comply with ANSI/NSF Motors are UL778 recognized. U L U L CLASSIFIED EPH Canadian Standards Association Underwriters Laboratories ANSI/NSF 61 - Drinking Water System Components 4P49 Goulds s is ISO 91 Registered. 3

4 METERS FEET GS1 33GS75 RECOMMENDED RANGE Ft. 2 MODEL 33GS SIZE COMPOSITE RPM GS TOTAL DYNAMIC HEAD GS5 33GS3 % EFF GS2 33GS15 33GS m 3 /hr CAPACITY METERS 22 2 FEET GS75 RECOMMENDED RANGE Ft. MODEL 4GS SIZE COMPOSITE RPM 345 4GS TOTAL DYNAMIC HEAD GS5 4GS3 4GS2 4GS % EFF CAPACITY m 3 /hr 4

5 33GS SELECTION CHART Horsepower Range 1 3, Recommended Range 1 5, 6 Hz, 345 RPM 33GS1 1 Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS15 1½ Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 5-1, Recommended Range 1 5, 6 Hz, 345 RPM 33GS5 5 Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS75 7½ Shut-off PSI GS Shut-off PSI

6 4GS SELECTION CHART Horsepower Range 1½ 7½, Recommended Range 2 65, 6 Hz, 345 RPM 4GS15 1½ Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

7 55GS SELECTION CHART Horsepower Range 1½ 5, Recommended Range 2 8, 6 Hz, 345 RPM 55GS15 1½ Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI Horsepower Range 7½ 1, Recommended Range 2 8, 6 Hz, 345 RPM 55GS75 7½ Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS Shut-off PSI

8 METERS FEET 8 55GS1 RECOMMENDED RANGE Ft. MODEL 55GS SIZE COMPOSITE RPM GS GS75 % EFF 6 55 TOTAL DYNAMIC HEAD GS5 55GS GS2 55GS CAPACITY 15 2 m 3 /hr METERS 2 FEET 8 7 RECOMMENDED RANGE 4 8 MODEL 6GS SIZE COMPOSITE RPM 345 6GS GS Ft. TOTAL DYNAMIC HEAD GS5 6GS3 6GS2 6GS % EFF CAPACITY m 3 /hr 8

9 6GS SELECTION CHART Horsepower Range 1½ 7½, Recommended Range 4 8, 6 Hz, 345 RPM 6GS15 1½ Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

10 75GS SELECTION CHART Horsepower Range 3 1, Recommended Range 4 1, 6 Hz, 345 RPM Depth to Water in Feet/Ratings in (Gallons per Minute) GS Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI GS Shut-off PSI GS SELECTION CHART Horsepower Range 3 7½, Recommended Range 5 12, 6 Hz, 345 RPM 8GS3 3 Depth to Water in Feet/Ratings in (Gallons per Minute) Shut-off PSI GS Shut-off PSI GS75 7½ Shut-off PSI

11 METERS FEET 6 75GS1 RECOMMENDED RANGE Ft. MODEL 75GS SIZE COMPOSITE RPM GS GS75 4 TOTAL DYNAMIC HEAD GS5 75GS3 % EFF m 3 /h CAPACITY METERS FEET 7 MODEL 8GS SIZE COMPOSITE RPM 345 8GS Ft RECOMMENDED RANGE TOTAL DYNAMIC HEAD GS75 8GS5 % EFF GS CAPACITY m 3 /hr 11

12 ITT 2881 East Bayard Street, Seneca Falls, NY Phone: (315) Fax: (315) Goulds s is a registered trademark of ITT Corporation. ITT, the Engineered Blocks Symbol and Engineered for Life are registered trademarks of ITT Manufacturing Enterprises, Inc. Noryl and Lexan is a registered trademark of GE Plastic. Copyright 21 ITT Corporation B33-8GS May, 21 Printed in U.S.A. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. ITT Engineered for life