Work Tool Attachments PRODUCT LINE
|
|
|
- Esmond Banks
- 7 years ago
- Views:
Transcription
1 Work Tool Attachments PRODUCT LINE
2 Backhoe Loaders 416E 420E 430E 450E augers asphalt cutters blades brooms forks hammers material handling arms plows rakes vibratory plate compactors Augers Drive Shaft Max Pressure Model Nm (lbf ft) Drive Method A26B Pin-On 416E-430E 5711 (4212) Double Planetary Width Height Angle All 2819 (111) 1041 (41) Sweeping Width Brush Diameter Brooms Angle BA25 All 2500 (98) 700 (28) Pickup Broom BP25 All 2500 (98) 700 (28) Special Application 2.5 All 2500 (98) 915 (36) Front (Loader) General Purpose All (89-96) ( ) Multi-Purpose All (89-96) ( ) Side Dump All (99-109) ( ) Rear (Hoe) Coral 416E-430E (12-30) ( ) Ditch Cleaning All (48-60) ( ) Heavy Duty All (12-36) ( ) Heavy Duty Rock 416E-430E (12-36) ( ) Soil Excavation 416E-430E (18-36) ( ) Standard Duty 416E-430E (12-36) ( ) Cold Planers Drum Width Number of Bits Model mm (in) (conical) PC E-430E 450 (18) 48 Loader IT All ( ) Hoe 416E-430E 75 (165) Pin Lock 416E-430E 109 (240) Pin Puller All ( ) Cutters Cut Wheel Diameter Mechanical Asphalt 420E-430E 470 (19) 193 (425) Forks Tine Length Tine Width Fold Over All (3.2) Pallet 420E-430E (41-53) 130 (5) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H65S S Flat-Top 416E-430E 371 (818) (2.56) H70/H70 S 416E-430E 435 (959) (2.76) H90C/H90C S 416E-430E 600 (1320) (3.31) H100/H100 S 450E 830 (1826) (3.74) Material Handling Arms Retracted Length Extended Length Extendible 420E-430E 3090 (122) 5090 (200) Plows Cutting Width Height Reversible, Trip Edge All ( ) (37-45) Reversible, Moldboard Trip All 3708 (146) 940 (37) Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Loader All 2108 (83) (13) Thumbs Rotation Angle Model degrees Hydraulic All 105 Stiff Link 416E-430E 90 Vibratory Plate Compactors Impulse Force Base Plate Width Model kn (lbf) Cycles/min mm (in) CVP40 All 40 (8928) (23) 2
3 Excavators (Mini) 301.6C 302.5C 304D CR 305.5D CR 308D CR 301.8C 303.5D CR 305D CR 307D 308D SB augers buckets grapples hammers shears vibratory plate compactors Drive Shaft Torque Max Pressure Model Nm (lbf ft) Drive Method A7B 301.6C-302.5C 1105 (815) Direct Drive A14B 302.5C-303.5D CR 2304 (1700) Direct Drive A19B 303.5D CR-304D CR 4120 (3040) Single Planetary A26B 305D CR-308D SB 6830 (5040) Double Planetary Digging 301.6C-302.5C (9-24) ( ) Ditch Cleaning All (32-63) ( ) Ditch Cleaning Tilt 302.5C CR-304D CR (43-63) ( ) General Purpose 307D, 308D CR (13-36) ( ) Heavy Duty 303.5D CR-308D SB (12-36) ( ) Heavy Duty Capacity 304D CR-308D SB (12-36) ( ) Heavy Duty Rock 307D-308D SB (24-30) ( ) Shears Force at Throat Jaw Opening S D CR - 308D CR 1812 (204) 240 (9) Thumbs Rotation Angle Model Degrees Hydraulic All Stiff Link 307D- 308D SB Fixed Vibratory Plate Compactors Impulse Force Cycles/ Base Plate Width Model kn (lbf) min mm (in) CVP C-305.5D CR 16 (3650) (12) CVP40 307D-308D CR 40 (8928) (23) Dedicated 307D-3080D SB 159 (350) All (29-268) Pin Lock 307D-3080D SB ( ) Grapples Jaw Opening Contractors' Grapples G107B 307D-308D CR 1765 (70) 360 (794) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H35D S 301.6C-301.8C 103 (227) (1.57) H45D S 301.6C-302.5C 145 (320) (1.89) H55D S 302.5C-305.5D CR 250 (550) (2.20) H65D S 303.5D CR-305.5D CR 371 (818) (2.56) H70/H70 S 307D-308D CR 435 (959) (2.76) H90/H90 S 307D-308D CR 600 (1320) (3.31) 3
4 Excavators (Small) 311D 312D 314D CR 315D 319D buckets couplers grapples hammers multi-processors rippers shears thumbs vibratory plate compactors Ditch Cleaning 311D-315D (48-72) ( ) Ditch Cleaning Tilt 311D-315D 1524 (60) ( ) General Purpose All (18-48) ( ) General Purpose Wide Tip 311D-315D (18-48) ( ) Heavy Duty 311D-315D (24-48) ( ) Heavy Duty Rock 311D-315D (24-48) ( ) General Purpose Performance 315D (24-48) ( ) Heavy Duty Rock Performance 315D (24-48) ( ) Center Lock TM 311D-315D ( ) Dedicated 311D-315D ( ) Pin Lock 311D-315D ( ) Grapples Jaw Opening Contractors' Grapples G112B 311D-314D 2195 (86) 857 (1885) G115B 315D 2555 (101) 1286 (2830) G120B 319D 2687 (106) 1523 (3350) Capacity Jaw Opening Model m 3 (yd 3 ) mm (in) Trash Grapples TG D-314D 1.70 (2.20) 2210 (87) TG D 1.83 (2.40) 2210 (87) TG-B 319D 2.70 (3.60) 2540 (100) Multi-Processors Force at Primary Blade Jaw Opening MP with Concrete Cutter Jaws MP15 CC 319D 2100 (236) 710 (28) MP with Crusher Jaws MP15 CR 319D 2200 (247) 670 (26) MP with Primary Pulverizer Jaws MP15 PP 319D 2100 (236) 700 (28) MP with Secondary Pulverizer Jaws MP15 PS 319D 2200 (247) 730 (29) MP with Shear Jaws MP15 S 319D 2100 (236) 390 (15) Rippers Shank Length Range Excavator Rippers 315D, 319D 992 (39) ( ) Shears Force at Throat Jaw Opening S320B All 3706 (417) 409 (16) S325B 315D-319D 5562 (625) 528 (21) Thumbs Rotation Angle Model Degrees Stiff Link All Fixed No-Link All 145 Full Rotation All 206 Vibratory Plate Compactors Impulse Force Cycles/ Base Plate Width Model kn (lbf) min mm (in) CVP75 All 74 (16508) (29) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H90/H90 S 311D-312D 600 (1320) (3.31) H100/H100 S 311D-315D 830 (1826) (3.74) H115 S 312D-319D 1000 (2200) (4.17) H120C S 315D-319D 1300 (2860) (4.53) H130 S 319D 1700 (3740) (5.12) 4
5 Excavators (Medium) 320D 324D 328D 330D 336E 321D LCR 325D 329D 336D buckets couplers hammers multi-processors rakes rippers grapples shears thumbs vibratory plate compactors Ditch Cleaning 320D-336E (60-72) ( ) Ditch Cleaning Tilt 320D-329D (60-72) ( ) General Duty 330D-336E (30-66) ( ) General Duty Wide Tip 330D-336E (32-62) ( ) General Purpose 320D-336D (24-60) ( ) General Purpose Wide Tip 320D-336D (24-54) ( ) Heavy Duty 320D-336E (24-72) ( ) Heavy Duty Rock 320D-336D (24-48) ( ) Heavy Duty Power 320D-336E (36-60) ( ) Severe Duty 330D-336E (30-54) ( ) Extreme Duty 330D-336E 1219 (48) 1.40 (1.84) Heavy Duty Performance 320D-336E (24-66) ( ) Heavy Duty Rock Performance 320D-336D (24-54) ( ) Severe Duty Performance 330D-336E (30-54) ( ) Center Lock 320D-336E ( ) Dedicated 320D-336E ( ) Pin Lock 320D-321D ( ) Grapples Jaw Opening Contractors' Grapples G120B 320D-329D 2687 (106) 1523 (3350) G125B 320D-329D 3128 (123) 1932 (4250) G130B 324D-336E 3223 (127) 2332 (5130) Log Loading Grapples GLL52B 320D FM 1321 (52) 1321 (52) GLL55B 325D FM, 330D FM 1397 (55) 1397 (55) GLL60B 325D FM, 330D FM 1524 (60) 1524 (60) Capacity Jaw Opening Model m 3 (yd 3 ) mm (in) Orange Peel Grapples GSH15B 320D MH 0.57 (0.75) 2121 (84) 325D MH, GSH20B 330D MH ( ) (81-100) Trash Grapples TG-B 320D-321D 2.70 (3.60) 2540 (100) TG-C 324D-329D 3.00 (3.90) 2845 (112) TG-CB 324D-329D 3.80 (5.00) 3129 (123) TG-D 330D-336E 4.4/5.8 (5.8/7.6) 3030/3397 (119./134) TG-DB 330D-336E 4.6/5.5 (6.0/7.3) 3086/3470 (122./137) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H115 S 320D 1000 (2200) (4.17) H120C S 320D-324D, 329D 1300 (2860) (4.53) H130 S All 1700 (3740) (5.12) H140D S 324D-336E 2350 (5170) (5.51) H160D S 33D, 336E 3150 (6946) (6.30) more Medium Excavators Work Tool Attachments 5
6 Excavators (Medium) continued 320D 324D 328D 330D 336E 321D LCR 325D 329D 336D Multi-Processors Force at Primary Blade Jaw Opening MP with Concrete Cutter Jaws MP15 CC 320D-329D 2100 (236) 710 (28) MP20 CC 324D-336E 3000 (337) 820 (32) MP30 CC 330D-336E 4100 (460) 975 (38) MP with Crusher Jaws MP15 CR 320D-329D 2200 (247) 670 (26) MP20 CR 324D-329D 2900 (326) 850 (34) MP30 CR 330D-336E 3800 (427) 1050 (41) MP with Primary Pulverizer Jaws MP15 PP 320D-329D 2100 (236) 700 (28) MP20 PP 324D-329D 2750 (309) 800 (32) MP30 PP 330D-336E 3950 (444) 960 (38) MP with Secondary Pulverizer Jaws MP15 PS 320D-329D 2200 (247) 730 (29) MP20 PS 324D-329D 3000 (337) 890 (35) MP30 PS 330D-336E 4800 (539) 1100 (43) MP with Shear Jaws MP15 S 320D-329D 2100 (236) 390 (15) MP20 S 324D-329D 2900 (326) 420 (17) MP30 S 330D-336E 3750 (421) 470 (19) MP with Tank Shear Jaws MP20 TS 324D-329D 2200 (247) 400 (17) MP30 TS 330D-336E 4000 (449) 210 (20) Wheel Dozers 814F2 844H 824H 854K 834H Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Excavator 320D-336E (33/49/65) 3/4/5 400 (16) Rippers Shank Length Range Excavator All 1084/1290 (43/51) ( ) Shears Force at Throat Jaw Opening S320B 320D-336E 3706 (417) 409 (16) S325B 320D-336E 5562 (625) 528 (21) S340B 324D-336E 6818 (766) 563 (22) S365C 330D-336E (1162) 879 (35) Thumbs Rotation Angle Model Degrees Stiff Link All Fixed No-Link All 145 Full Rotation All 206 Vibratory Plate Compactors Impulse Force Cycles/ Base Plate Width Model kn (lbf) min mm (in) CVP D-336E 110 (24669) (34) Landfill Compactors 816F2 836H 826H scoops blades Width Capacity Coal U- 814F (170) 10.7 (14.0) 824H 4801 (189) 16.1 (21.0) 834H 5766 (227) 22.2 (29.0) 844H 5843 (230) 30.7 (40.2) 854K 7214 (284) 44.7 (58.2) Semi U- 834H 4699 (185) 10.2 (13.3) 844H 5410 (213) 16.1 (21.1) 854K 5325 (249) 25.4 (33.1) Woodchip U- 824H 4775 (188) 23.7 (31.0) 834H 5766 (227) 30.6 (40.0) Width Capacity Landfill 816F 3810 (150) 12.2 (16.0) 826H 4369 (172) 16.8 (22.0) 836H 5182 (204) 25.7 (33.6) Semi U- 816F 3810 (150) 9.2 (12.0) 826H 4521 (178) 16.2 (21.2) 836H 5309 (209) 22.4 (29.3) Straight 816F 3658 (144) 10.7 (14.0) 826H 4369 (172) 13.0 (17.0) 836H 5182 (204) 19.0 (25.9) Scoops Width Doze Capacity Coal 814F (147) 11.5 (15) 824H 4039 (159) 26.8 (35) 834H 4877 (192) 45.9 (60) Woodchip 824H 4089 (161) 41.3 (54) 834H 4877 (192) 53.5 (70) 6
7 Excavators (Large) 345D 349E 365C 374D 385C 390D buckets couplers hammers multi-processors grapples rippers shears thumbs General Duty 374D, 390D (54-101) ( ) General Purpose 345D, 365C, 385C (30-96) ( ) General Purpose Wide Tip 345D (36-78) ( ) Heavy Duty 345D-390D (36-79) ( ) Heavy Duty Rock 345D, 365C, 385C (30-91) ( ) Heavy Duty Power 345D 1372 (54) 2 (2) Severe Duty 374D, 390D (43-96) ( ) Extreme Duty 374D, 390D (79-83) ( ) Rock Ripping 345D, 365C, 385C (47-54) ( ) Spade Rock 365C 2007 (79) 4.40 (5.75) Spade Heavy Duty Rock 385C 2311 (91) 4.78 (6.25) Heavy Duty Performance 345D (36-74) ( ) Heavy Duty Rock Performance 345D (30-48) ( ) Center Lock 345D, 374D, 390D ( ) Dedicated 345D-390DC ( ) Grapples Jaw Opening Contractors' Grapples G145B 345D 3433 (135) 3050 (6724) G165B 365C-374D 3860 (152) 4055 (8940) G185B 385C 4076 (161) 4800 (10582) Capacity Jaw Opening Model m 3 (yd 3 ) mm (in) Orange Peel Grapples 345D MH, GSH22B 345DUHD ( ) (99-105) Trash Grapples TG-F 345D ( ) ( ) TG-TB 345D ( ) ( ) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H160D S 349D, 349E 3150 (6946) (6.30) H180D S 345D-374D 3800 (8360) (6.85) Multi-Processors Force at Primary Blade Jaw Opening MP with Concrete Cutter Jaws MP30 CC 345D 4100 (460) 975 (38) MP40 CC 345D-374D 4400 (494) 1280 (50) MP with Crusher Jaws MP30 CR 345D 3800 (427) 1050 (41) MP40 CR 345D-374D 4650 (523) 1320 (52) MP with Primary Pulverizer Jaws MP30 PP 345D 3950 (444) 960 (38) MP with Secondary Pulverizer Jaws MP30 PS 345D 4800 (539) 1100 (43) MP40 PS 345D-374D 5500 (618) 1400 (55) MP with Shear Jaws MP30 S 345D 3750 (421) 470 (19) MP40 S 345D-374D 4750 (326) 630 (25) MP with Tank Shear Jaws MP30 TS 345D 4000 (449) 210 (20) Rippers Shank Length Range Excavator All (40-71) ( ) Shears Force at Throat Jaw Opening S340B 345D 6818 (766) 563 (22) S365C 345D-374D (1162) 879 (35) S385C 345D-385C (1405) 879 (35) Thumbs Rotation Angle Model Degrees Stiff Link 345D Fixed No-Link 345D 145 Full Rotation 345D 206 7
8 Excavators (Wheeled) M313D M315D M316D M318D M322D M325D buckets couplers grapples hammers rippers shears thumbs vibratory plate compactors Ditch Cleaning M313D-M322D (48-72) ( ) Ditch Cleaning Tilt M313D-M316D (60-72) ( ) M313D-M316D, General Purpose M322D (24-54) ( ) Heavy Duty M313D-M322D (24-48) ( ) M313D-M316D, Heavy Duty Rock M322D (24-48) ( ) Heavy Duty Power M322D (36-48) ( ) Heavy Duty Performance M322D (24-54) ( ) Heavy Duty Rock Performance M322D (24-42) ( ) Center Lock M313D-M322D ( ) Pin Lock M313D-M320D ( ) Grapples Jaw Opening Contractors' Grapples G115B M313D-M316D 2555 (101) 1286 (2830) G120B M318D, M322D 2687 (106) 1523 (3350) G125B M22D 3128 (123) 1932 (4250) Capacity Jaw Opening Model m 3 (yd 3 ) mm (in) Orange Peel Grapples M318D MH, GSH15B M322D MH 0.57 (0.75) 2121 (84) M322D MH, GSH20B M325DB MH ( ) (81-100) Trash Grapples TG-315 M313D-M316D 1.83 (2.40) 907 (2000) TG-B M318D, M322D 2.7 (3.60) 1288 (2840) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H100/H100 S M313D-M316D 830 (1826) (3.74) H115 S All 1000 (2200) (4.17) H120C S M315D-M322D 1300 (2860) (4.53) H130 S M318D-M322D 1700 (3740) (5.12) Rippers Shank Length Range M315D- Excavator M322D 992/1084 (39/43) ( ) Shears Force at Throat Jaw Opening S320B M315D-M318D 3706 (417) 409 (16) S325B M315D-M318D 5562 (625) 528 (21) S340B M318D, M322D 6818 (766) 563 (22) Thumbs Rotation Angle Model Degrees Stiff Link M313D-M322D Fixed Vibratory Plate Compactors Impulse Force Cycles/ Base Plate Width Model kn lbf min mm (in) CVP75 M313D-M318D 74 (16508) (29) CVP110 M322D 110 (24669) (34) 8
9 Skid Steer, Multi Terrain & Compact Track Loaders 216B3 242B3 252B3 259B3 277C 289C 226B3 246C 256C 262C 279C 297C 236B3 247B3 257B3 272C 287C 299C augers backhoes blades brooms brushcutters buckets cold planers compactors hammers shears forks tillers trenchers wheel saws rakes snow blowers stump grinders material handling arms mulchers Augers Drive Shaft Max Pressure Drive Method Model Nm (lbf ft) A14B All 2304 (1700) Direct A19B All 4118 (3037) Planetary A26B C-Series Models, 226B (5034) Double Planetary Backhoes BH150 BH160 Bucket Breakout Force Dig Depth mm (in) 216B3, 226B3, 242B3, 247B3, 257B3, 259B (7146) 3074 (121) C-Series Models, 236B3, 252B (7146) 3074 (121) Width Height Angle All 1829/2134 (72/84) 614 (24) Dozer All 2002/2342 (79/92) 619 (24) Brooms Sweeping Width Brush Diameter Angle BA18 All 2134 (84) 813 (32) Pick Up BP15B All 1524 (60) 660 (26) BP18B C-Series Models, 236B3, 252B (72) 660 (26) Utility BU115 All 1510 (59) 660 (26) BU118 C-Series Models, 236B3, 252B (73) 660 (26) Brushcutters Max Working Width Tip Speed Cutting Diameter Model mm (in) fpm mm (in) BR B3, 226B3, 242B3, 247B3, 257B3, 259B (60) 13,080-18, (950) BR166 All 1676 (66) 10,270-14, (1050) BR172 All 1829 (72) 11,210-15, (1100) BR B (72) 14,940-19, (1120) BR378 C-Series Models 1981 (78) 11,130-19, (1180) more Skid Steer, Multi-Terrain & Compact Track Loader Work Tool Attachments 9
10 Skid Steer, Multi Terrain & Compact Track Loaders continued 216B3 242B3 252B3 259B3 277C 289C 226B3 246C 256C 262C 279C 297C 236B3 247B3 257B3 272C 287C 299C Dirt All (54-78) ( ) General Purpose All (60-84) ( ) Light Material All (72-96) ( ) Multi-Purpose All (60-84) ( ) Utility All (60-72) ( ) Width Range Jaw Opening mm (in) mm (in) Industrial Grapple All (60-78) 1016 (40) Utility Grapple All 1676/1829 (66/72) 902 (35.5) Cold Planers Number Drum Width of Bits Model mm (in) (conical) PC203 All 305 (12) 28 PC B3-299C 450 (18) 48 PC205 C-Series Models, 226B3 450 (18) 48 PC206 C-Series Models, 226B3 610 (24) 60 PC210 C-Series Models 1000 (40) 78 Forks Tine Length Fork Tine Width Pallet All (36-48) 100 (4) Exposed Fork Tine Width Length Utility All 1676/1829 (66/72) 627 (24.7) Utility Grapple All 1676/1829 (66/72) 627 (24.7) Industrial Grapple All 1676/1829 (66/72) 559 (22) Hammers Max Blow Rate Tool Diameter blows/min mm (in) H55D S All 250 (550) (2.20) H65D S All 371 (818) (2.56) Material Handling Arms Load Length Width w/ side step (end point) Fixed Length All 1309 (52) 768 (30) Mulchers Working Width Max Cutting Diameter HM312 C-Series Models 1640 (65) 200 (8) HM315 C-Series Models 1829 (72) 200 (8) Jaw Opening Width Industrial Grapple All 940 (37) 1829/2134 (72/84) Working Width Bucket Capacity Landscape Model mm (in) m 3 (ft 3 ) LR15B All 1576 (62) 0.3 (10.8) LR18B 236B3-299C 1883 (74) 0.3 (11.9) Max Angling Drum Width (right or left) Power Box Model mm (in) degrees PR172 All 1829 (72) 20 PR184 All 2134 (84) 20 PR190 All 2286 (90) 20 Snow Blowers Intake Width Throw Distance Model mm (in) m (ft) SR B3, 226B3, 242B3, 247B3, 257B3, 259B (67) 9.1 (30) SR118 C-Series Models, 236B3, 252B3, 242B3, 257B3, 259B (73) 12.2 (40) SR121 C-Series Models, 236B3, 252B (85) 12.2 (40) SR318 C-Series Models, 226B (73) 13.7 (45) SR321 C-Series Models, 226B (85) 13.7 (45) Stump Grinders Width Length SG16B All 1175 (46) 1737 (69) SG18B C-Series Models, 226B (46) 1737 (69) Shears Force at Throat Jaw Opening S B3-297C 1812 (204) 240 (9.4) Tillers Width Working Depth LT13B All 1321 (52) (1-6) LT18B 236B3-299C 1847 (73) (1-6) Trenchers Overall Width Working Depth T6B All 1426 (56) 914 (36) T9B All 1901 (75) 1219 (48) T15B C-Series Models, 226B (75) 1524 (60) Vibratory Drum Compators Drum Width Dynamic Force CV16B All 1676 (66) 5399 (11903) CV18B C-Series Models, 236B3, 252B (73) 5399 (11903) Vibratory Plate Compactors Impulse Force Cycles/ Base Plate Width Model kn lbf min mm (in) CVP16 All* 16 (3650) (12) * Only for use with the BH150/BH160 Backhoe attachment. Wheel Saw Drum Width Depth of Cut SW45 C-Series Models, 226B3 80/160/200 (3/6/8) 457 (18) SW60 C-Series Models 160/200 (6/8) 610 (24) 10
11 Telehandlers TH255 TH406 TH407 TL642 TL943 TL1055 TL1255 TH514 forks truss booms General Purpose All 2410 (95) ( ) TH255, TH406, Grapple TH (90) ( ) Light Material All 2500/2700 (98/106) ( ) All, except Material Handling TH (94) 1.50 (1.95) Multi Purpose All 2406 (94) 1.00 ( ) Carriages Width Model mm (in) Carriages standard, wide, rotating, side-shift, side tilt All (48-74) Carriages swing TL642-TL1255, TH (48) Forks Tine Length Model mm (in) Block All 1220 (48) Pallet All 1069/1220/1524 (42/48/60) Lumber All 1524 (60) Manure Fork and Grab TH406, TH (90) Cubing All 1220 (48) Lifting Hooks Rated Load Capacity Range Fork Mounted All (5,500-12,000) IT Coupler All, except TH (6,500-10,000) Material Handling Arms Extension Model mm (in) Material Handling Arm TH /3071/4040 (80/121/160) Self Tipping Hoppers Width Capacity Self Tipping Hopper TH406, TH (40) 1.20 (1.60) Truss Booms Length Lifting Capacity Model mm (in) m 3 yd 3 Truss Boom TH406-TL (13) 500 (1102) Track Loaders 953D 963D couplers forks material handling ams rakes Width Height Straight Trim All ( ) (35-71) General Purpose All (93-115) ( ) Multi-Purpose All (96-134) ( ) Side Dump 963D-973D ( ) ( ) Horizontal Pin Lock All ( ) Forks Tine Length Width Over Tine (1219/1524/ Pallet All 1829/2134/ 2438) (48/60/72/ 84/96) (17-92) Material Handling Arms Retracted Length Extended Length Extendible All 2438 (96) 4648 (183) Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Loader 963D 2388 (94) (13) Loader, w/ Top Clamp 963D 2540 (100) (12) 11
12 Wheel Loaders (Compact) 904H 906H 907H 908H 914G IT14G augers blades brooms buckets cold planers forks plows rakes snow blowers stump grinders tillers trenchers compactors wheel saws Drive Shaft Torque Max Pressure Drive Method Model Nm (lbf ft) A14B 904H-908H 2304 (1700) Direct A19B 904H-908H 4118 (3037) Planetary A26B 908H 6826 (5034) Double Planetary Width Height Angle 904H (72-122) (24-47) Dozer 904H 2002/2342 (79/92) 619 (24) Brooms Sweeping Width Brush Diameter Angle BA18 904H-908H 2134 (84) 813 (32) BA25 914G, IT14G 2500 (98) 700 (28) Pick Up BP15B 904H 1524 (60) 660 (26) BP18B 904H 1829 (72) 660 (26) BP22 906H-908H 2200 (87) 700 (28) BP25 914G, IT14G 2500 (98) 700 (28) Special Application G, IT14G 2500 (98) 915 (36) Utility BU H-908H 1510 (59) 660 (26) BU H-908H 1865 (73) 660 (26) Coal 914G 2819 (111) Fertilizer 914G 2159 (85) ( ) General Purpose All (70-95) ( ) Industrial Grapple 904H (60-78) Light Material 904H-908H (70-81) ( ) Material Handling 914G, IT14G (86-111) ( ) Multi-Purpose All (70-95) ( ) Side Dump 914G, IT14G (94-108) ( ) Woodchip 914G, IT14G 3099 (122) ( ) Cold Planers Drum Width Number of Bits Model mm (in) (conical) PC H-908H 305 (12) 28 PC H-914G 450 (18) 48 PC H-914G 450 (18) 48 PC H-914G 600 (24) 60 PC H-908H 1000 (40) 78 Horizontal Pin Lock 914G 181 (400) Forks Tine Length Carriage Width Industrial Grapple 904H 559 (22) 1676/1829 (66/72) Log & Lumber 914G, IT14G (48-60) (70-86) Pallet 904H (36-48) 1168 (46) 906H-907H (44-48) 1397 (55) 908H (44-48) 1397 (55) 914G, IT14G (42-72) (60-76) 12 more Compact Wheel Loader Work Tool Attachments
13 Wheel Loaders (Compact) continued 904H 906H 907H 908H 914G IT14G Material Handling Arms Width w/ side step Load Length-end Fixed Length 904H-908H 1309 (52) 768 (30) Retracted Length Extended Length Extendible 914G, IT14G 2438/2007 (96/79) 4039/3937 (159/155) Plows Cutting Width Height Reversible 914G, IT14G 3658/3226 (144/127) 1270/1143 (50/45) V-Plow 914G, IT14G 2642 (104) 2007 (79) Raking Width Bucket Capacity Landscape LR15B 904H-908H 1576 (62) 0.3 (10.8) LR18B 904H-908H 1883 (74) 0.3 (11.9) Working Width Power Box Model mm (in) PR H-908H 1829 (72) PR H-908H 2134 (84) PR H-908H 2286 (90) Snow Blowers Intake Width Throw Distance Model mm (in) mm (ft) SR H-908H 1803 (71) 12.2 (40) SR H-908H 1854 (73) 12.2 (40) SR H-908H 2159 (85) 12.2 (40) SR H-908H 1854 (73) 13.7 (45) SR H-908H 2159 (85) 13.7 (45) Stump Grinders Width Length SG16B 904H-908H 1175 (46) 1737 (69) Tillers Width Working Depth LT13B 904H-908H 1321 (52) (1-6) LT18B 904H-908H 1847 (73) (1-6) Trenchers Overall Width Working Depth T6B 904H-908H 1426 (56) 914 (36) T9B 904H-908H 1901 (74.8) 1219 (48) T15B 906H-908H 1901 (74.8) 1524 (60) Vibratory Drum Compactors Drum Width Dynamic Force CV16B 904H-908H 1676 (66) 5399 (11903) CV18B 904H-908H 1854 (73) 5399 (11903) Wheel Saws Drum Width Number of Bits Model mm (in) (conical) SW45 906H-908H SW60 906H-908H Track Type Tractors D3K D4K D5K D6K D6N D6T D7R2 D8T D9T D10T D11T blades rakes winches Width Capacity D6T, D7R2- Coal U- D11T ( ) ( ) Cushion Dozer D9T, D10T ( ) N/A D7R2, D8T, Landfill U- D9T ( ) ( ) Reclamation U- D10T, D11T ( ) ( ) Semi U- D6T, D7R ( ) ( ) D6T, D8T- Woodchip U- D10T ( ) ( ) Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Blade D6N-D6T (93-138) ( ) Multi- Application D6T 3048 (120) (11.0) Rock & Root D6T 3023 (119) (10.0) Winches Speed PA40 D3-D5K 610 (1,345) Variable PA50 D6K 907 (2,000) Variable 13
14 Wheel Loaders (Small) 924H 924Hz 928Hz 930H blades brooms buckets couplers forks material handling arms plows rakes Width Height Angle 930H ( ) (30-41) Straight 930H 2438 (96) 1321 (52) Brooms Sweeping Width Brush Diameter Angle BA25 All 2500 (98) 700 (28) Pick Up Brooms BP25 All 2500 (98) 700 (28) Special Application 2.5 All 2500 (98) 915 (36) Fertilizer 928Hz 2667 (105) 3.44 (4.50) General Purpose All ( ) ( ) Grading 930H 2692 (106) 1.83 (2.40) Grapple All 2692 (106) ( ) High Dump All 2667 (105) ( ) Light Material 924H, 930H 2549 (100) ( ) Material Handling All ( ) ( ) Multi-Purpose All ( ) ( ) Side Dump All ( ) ( ) Waste Handling All 3277 (129) ( ) Woodchip All ( ) ( ) Forks Tine Length Carriage Width Log & Lumber All (48-84) (68-96) Pallet All (42-72) (62-84) Pipe & Pole 930H 1829 (72) 2692 (106) Material Handling Arms Retracted Length Extended Length Extendible All 2562 (101) 4162 (164) Plows Cutting Width Height One-Way 930H 2642 (104) 1702 (67) Reversible All ( ) (36-50) V- 928Hz-930H ( ) 2007 (79-82) Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Loader All 2495 (98-117) 8/ (12-14) Loader, w/ Top Clamp All 2146 (85-112) 7/ (12-14) Fusion TM All ( ) Cutters Cut Wheel Diameter Mechanical Asphalt 924H, 930H 470 (19) 193 (425) 14
15 Wheel Loaders (Medium) 938H 950H 962H 966H 972H 980H blades brooms buckets couplers forks material handling arms plows rakes Width Height Angle 950H/962H 2743/3429 (108/135) 1143/889 (45/35) Brooms Sweeping Width Brush Diameter Angle BA30 938H-962H 3000 (118) 915 (36) Special Application H-962H 3000 (118) 915 (36) Block Handler 980H 3658 (144) 3.82 (5.00) Coal Performace Series 972H, 980H 3638 (143) ( ) Coal All ( ) ( ) General Purpose Performace Series 972H, 980H ( ) ( ) General Purpose All ( ) ( ) Grading 938H 2692 (106) 1.78 (2.33) Grapple 938H-972H ( ) ( ) Heavy Duty Rock 966H, 972H 3251 (128) ( ) Heavy Duty Quarry Rock 980H ( ) ( ) High Dump 938H-972H ( ) ( ) Material Handling Performace Series 972H, 980H ( ) ( ) Material Handling All ( ) ( ) Multi-Purpose 938H-972H ( ) ( ) Rock Performance Series 972H, 980H ( ) ( ) Rock 950H-980H ( ) ( ) Side Dump 938H-972H ( ) ( ) Slag 972H-980H ( ) ( ) Waste Handling All ( ) ( ) Woodchip All ( ) ( ) Fusion 938H-972H ( ) Block Handler 980H 1014 (2235) Forks Tine Length Carriage Width Block Handler 980H 1524 (60) 1829 (72) Log & Lumber 938H-972H (48-96) (72-99) Logging 950H, 962H, 980H (64-72) (88-110) Millyard All (54-72) (88-109) Pallet All (48-96) (84-120) Pipe & Pole 938H-972H 1829/2438 (72/96) 2692/2997 (106/118) Material Handling Arms Retracted Length Extended Length Extendible All (96-134) ( ) Plows Cutting Width Height Reversible All ( ) (40-50) V- 938H-972H ( ) (82-90) Raking Width Tooth Spacing Model mm (in) Teeth mm (in) Loader 938H-972H (83-126) 8/ ( ) Loader, w/ Top Clamp All (83-147) ( ) 15
16 Wheel Loaders (Large) 988H 990H 992K 993K 994F couplers forks rakes Coal 988H-994F ( ) ( ) General Purpose Performance Series 988H 3912 (154) ( ) Heavy Duty Rock Performance Series 988H 4089 (161) 6.3 (8.3) Heavy Duty Rock 990H-992K ( ) ( ) Heavy Duty Granite 998H-993K ( ) ( ) High Abrasion 992K-993K ( ) ( ) Iron Ore 988H-993K ( ) ( ) Rock Performance Series 988H 4013 (158) ( ) Rock 988H-994F ( ) ( ) Serrated Edge 988H-990H, 993K ( ) ( ) Slag 988H-992K ( ) ( ) Block Handling 988H 1440 (3175) Forks Tine Length Carriage Width Block Handling 988H (60-69) 2083 (82) Logging 988H 2489 (98) 2769 (109) Pallet 988H, 992K (72-108) ( ) Raking Width Height Block Handling 988H 2057 (81) 2057 (81) Motor Graders 120M 12M 140M 160M 14M 16M 24M lift groups plows Parallel Lift Groups Parallel Lift Groups M ( ) scarifiers snow wings Scarifiers Working Width Model mm (in) Teeth Front V-Type M 1260 (50) 5/11 Mid-Mount Straight M 17 Mid-Mount V-Type M 11 Width Height Angle M 3835 (151) 991 (39) Straight M ( ) (52-57) Plows Cutting Width Height One-Way M ( ) (66-67) Reversible M ( ) 1219 (48) V M ( ) (79-90) Snow Wings Length Height Snow Wings M ( ) 965 (38) For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at GEDQ0300 (10-10) 2010 Caterpillar All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, their respective logos, Caterpillar Yellow, and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may 16not be used without permission.
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits
Cat. Buckets. 311 390 Hydraulic Excavators. Features: Designed as an Integral Part of the Cat System. Made to Last. Next Generation.
Cat Buckets 311 390 Hydraulic Excavators Features: Designed as an Integral Part of the Cat System As Cat Excavators continue to set industry standards in general, quarry and heavy construction applications,
1-800-698-5510 www.martatch.com
LOADER ATTACHMENTS SKIDSTEER ATTACHMENTS SNOW BLADES CUSTOM made attachments to fit any loader or skid steer 1-800-698-5510 www.martatch.com PRODUCT INDEX ATTACHMENTS Page Buckets 2-3 Bale Spears 4 Manure
Winchester Equipment Rental Rates 121 Indian Hollow Rd Winchester, VA 1(800) 323-3581
Winchester Equipment Rental Rates 121 Indian Hollow Rd Winchester, VA 1(800) 323-3581 SKID STEER LOADERS R.O.C. S70 $160 $475 $1105 700 LBS S450/S510 $225 $665 $1655 1300-1600 LBS S530/S570/S590/ $265
FEMA's SCHEDULE OF EQUIPMENT RATES
DEPARTMENT OF HOMELAND SECURITY FEDERAL EMERGENCY MANAGEMENT AGENCY RECOVERY DIRECTORATE PUBLIC ASSISTANCE DIVISION WASHINGTON, D.C. 20472 The rates on this Schedule of Rates are for applicant-owned equipment
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
VOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
216B/226B/236B Series 3 242B/252B Series 3
216B/226B/236B 242B/252B Skid Steer Loaders 216B 226B 236B 242B 252B Engine Engine Model Cat C2.2 Cat C2.2 T Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT Net Power (SAE 1349/ISO 9249) 35 kw (47 hp) 42 kw (56
CONSTRUCTION EQUIPMENT SOLUTIONS GOVERNMENT
CONSTRUCTION EQUIPMENT SOLUTIONS GOVERNMENT nacasegovsales@casece.com Contract # GS-30F-0006U 1-888-614-3202 and # GS-07F-170CA www.casece.com 1 GOVERNMENT SOLUTIONS FOR HEAVY EQUIPMENT GSA CONTRACT TERMS
308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
Telescopic Handler Attachments. Product Range
Telescopic Handler Attachments Product Range 2 Far-reaching versatility No matter what sector you work in construction, agriculture, industrial, snow removal or landscaping a Bobcat telescopic handler
$100 OFF RENTAL 800.750.4228
$100 OFF RENTAL Rental Minimum $1,000 Offer Valid at Chula Vista Location Only 800.750.4228 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow,
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
226D/232D/236D/ 242D/246D/262D
226D/232D/236D/ 242D/246D/262D Skid Steer Loaders Engine 226D 232D 236D 242D 246D 262D Gross Power (SAE J1995) 50.1 kw 67.1 hp 50.1 kw 67.1 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3
EQUIPMENT LIST. Your. www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon. Partner in the Planning
www.1rentaldepot.com Hours Monday Friday 7:00 a.m. 5:00 p.m. Saturday 8:00 a.m. 12:00 noon Saint Petersburg 4895 34 th Street North (727) 528-1588 EQUIPMENT LIST Your Partner in the Planning for all Your
Hydraulic Excavators
Chapter 8 Hydraulic Excavators Hydraulic excavators are designed to excavate below the ground surface on which the machine rests. These machines have good mobility and are excellent for general-purpose
Cat. Sizes to fit Cat Skid Steer Loaders, Wheel Loaders, Telehandlers, Backhoe Loaders, and most other manufacturers models.
Cat tires enhance productivity with design innovations and with the valuable option of purchasing your tires complete as mounted assemblies. Cat dealers and Cat tire retailers stock wheel types, sizes,
906H2, 907H2, 908H2. Compact Wheel Loaders
906H2, 907H2, 908H2 Compact Wheel Loaders Engine 906H2 907H2 908H2 Engine Model Cat C3.3B DIT* Cat C3.3B DIT* Cat C3.3B DIT* Rated Net Power @ 2,500 rpm SAE J1349 51 kw (68 hp) 51 kw (68 hp) 51 kw (68
304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
COMPACT & UTILITY TRACTOR LOADERS 235TLA I 240TLA I 250TLA I 110TL I 250TL I 615TL I 625TL
COMPACT & UTILITY TRACTOR LOADERS 235TLA I 240TLA I 250TLA I 110TL I 250TL I 615TL I 625TL COMPACT & UTILITY TRACTOR LOADERS LOADER COMPATIBILITY 235TLA 240TLA 250TLA BOOMER 20, BOOMER 25 BOOMER 30, BOOMER
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
SELECTED IMPLEMENTS FOR HORSE RANCHES. www.gearmore.com - email: sales@gearmore.com
SELECTED IMPLEMENTS FOR HORSE RANCHES AFFORDABLE QUALITY Make Your Tractor More Productive This brochure is to aid you in selecting tools to make your ranch a more productive and attractive property for
DITCH WITCH MT12 MICROTRENCHER. ditchwitch.com
DITCH WITCH MT12 MICROTRENCHER ditchwitch.com Rule With An Iron Fist. ditchwitch.com DITCH WITCH MT12 MicroTrencher Throughout the world, demand is increasing for faster broadband communications, necessitating
303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Contractor Equip & Helicopter Ops
US&R Heavy Equipment & Rigging Specialist Training Module 3 Unit 3: Demolition Equip and Methods + Helicopter Ops 22Mar08 1 Unit Objective You will be able to explain how demolition contractors and their
JOHN DEERE TURF & UTILITY PRODUCTS EQUIPMENT FOR COMPACT UTILITY TRACTORS 260 Backhoe Equipment for Base Machine
260 Backhoe Equipment for Base Machine 6 ft. 2 In. (1.89 m) Digging Depth One Double Acting Swing Cylinder 150 Degree Swing Narrow Control Console Two Lever Control Six Spool Control Valve Hydraulics 8
239D/249D/259D/ 279D/289D
239D/249D/259D/ 279D/289D Compact Track Loaders Engine 239D 249D 259D 279D 289D Gross Power (SAE J1995) 50.1 kw 67.1 hp 50.1 kw 67.1 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp Weights Operating
SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)
SEQ # 725-1112 November, 2012 (Typed Responses Required) 1 of 3 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: Contact Person: TIM COMMERS Street Address: 2909 E FRANKLIN AVE P.O. Box: City, State,
SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
Screening Crushing Mixing Aerating Loading ALLU SM. Screener Crusher
Screening Crushing Mixing Aerating Loading ALLU SM Screener Crusher ALLU Screener Crusher. A unique solution for fast and effective processing of different materials. The ALLU SM Versatile Attachment concept
308D CR. Mini Hydraulic Excavator with Swing Boom. Engine Power. Weight
308D CR Mini Hydraulic Excavator with Swing Boom Engine Power Net power Gross power Weight Operating weight 41.5 kw/56.5 hp 43.0 kw/58.5 hp 8440 kg Features 308D CR with Swing Boom Controllability Perfectly
EQUIPMENT RATES USDA Forest Service Northern Region - 89 - Cost Estimating Guide for Road Construction
EQUIPMENT RATES USDA Forest Service Northern Region - 89 - Cost Estimating Guide for Road Construction EQUIPMENT RATES The figures shown in this section are for equipment rates only. Operator rates are
Worldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL
MODEL 2400 RAISED BED PLASTIC MULCH LAYER OPERATING MANUAL Rain-Flo Irrigation 929 Reading Road East Earl, Pa 17519 PH: 717-445-3000 Table Of Contents Bed Height...............................7 Cover Disk...............................9
Standard Machine and Equipment Prices (North America ) Brokk 400 Machine (Rev B) $ 295,998.00
Standard Machine and Equipment Prices (North America ) Brokk 400 Machine (Rev B) $ 295,998.00 Standard machine (Electro hydraulic driven), Rev B Equipped with: hammer, 3 piece boom 360 rotation, extra
Trailmowers Type Beskrivelse Pris excl. moms Pris inkl. moms
Trailmowers Type Beskrivelse Pris excl. moms Pris inkl. moms T11544* 44" TRAILMOWER - 11.5 HP Briggs & Stratton I/C, recoil start, center hitch with offset capability, rear discharge, optional remote operator
Skid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
HAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN,
HAMMER, BREAK, DESTROY, SMASH, CRACK, OBLITERATE, POUND, FLATTEN, YOUR WAY THROUGH THE DAY. MOUNTED BREAKERS, VIBRATORY COMPACTORS, AND DROP HAMMERS CATEGORY MOUNTED YEAR 14-15 FORMAT PRODUCT CATALOG Hydraulic
Fork Lift Truck Attachments
Lift Truck Attachments Mounted Sweeper - The Basil The fork mounted sweeper is a quick and easy solution for reheaping your loose granule products such as sand, top soil, grain or similar. Optional left
323E. Hydraulic Excavator
323E Hydraulic Excavator Engine Weights Engine Model Cat C6.6 ACERT 323E L: Engine Rated Power ISO 14396 121 kw (165 hp) Minimum Weight 22 900 kg Drive Maximum Weight 25 200 kg Maximum Travel Speed 5.6
Kubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
EQUIPMENT SAFETY EARTHMOVING MATERIAL HANDLING NAVFAC MIDLANT
EQUIPMENT SAFETY EARTHMOVING MATERIAL HANDLING COMMON EARTHMOVING EQUIPMENT SKID LOADERS BACKHOE FRONT END LOADER GRADERS SCRAPERS BULL DOZERS Lots of stuff Here! COMMON MATERIAL HAULING TRUCKS ALL TYPES
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA. www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 1 T-SERIES BACKHOE LOADER The family gets wider: The 570T makes available all the well known CASE
RIGHT. www.wright-attachments.com
RIGHT www.wright-attachments.com RIGHT Wright Attachments is a family run Engineering Company that specialises in Material Handling Solutions, along side our popular range of attachments we have the knowledge
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
336D2. Hydraulic Excavator
336D2 Hydraulic Excavator Engine Weights Engine Model Cat C9 Operating Weight Standard Undercarriage 34 489 kg 76,035 lb Engine Power (ISO 14396) 209 kw 280 hp Operating Weight Long Undercarriage 37 086
ZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
336F L/LN. Hydraulic Excavator. Engine Engine Model. Drive Maximum Travel Speed Maximum Drawbar Pull Weights. Cat C9.3 ACERT
336F L/LN Hydraulic Excavator Engine Engine Model Power ISO 14396 (metric) Power ISO 9249 (metric) Cat C9.3 ACERT 236 kw (321 hp) 226 kw (307 hp) Drive Maximum Travel Speed Maximum Drawbar Pull Weights
JCB TELESCOPIC WHEELED LOADERS TM310, TM310S, TM220 AND TM180
JCB TELESCOPIC WHEELED LOADERS TM30, TM30S, TM220 AND TM80 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability
RAMMER PUTTING SAFETY FIRST
BREAKER BOOMS 1 RAMMER PUTTING SAFETY FIRST Rammer, the world s best known and most-respected brand of hydraulic hammers, offers a comprehensive range of breaker booms to enhance the safety, productivity
PLM series Permanent load lifting magnets
Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
CAST GROUP s.r.l. Listino Prezzi Price List
CAST GROUP s.r.l. Listino Prezzi Price List Aggiornato al 01/06/2009 PIXY THE ARTICULATED TOOL-CARRIER & COMPACT LOADER CAST GROUP s.r.l. Via Taglio Sinistro 63/B 30035 Mirano (Venezia) Italia Tel 041/5701827
349E L. Hydraulic Excavator
349E L Hydraulic Excavator Engine Drive Engine Model Cat C13 ACERT Maximum Travel Speed 4.7 km/h.9 mph Net Power SAE J1349 9 kw 396 hp Maximum Drawbar Pull 33 kn 7,300 f Weight Minimum Weight 47 800 10,400
T53 SLAB BUNDLE EXTRACTOR ATTACHMENT
T53 SLAB BUNDLE EXTRACTOR ATTACHMENT APPLICATION AND OPERATING GUIDE Distributed By: UNIT LOAD HANDLING SYSTEMS, INC. 2301 SO. MISSION CIRCLE, FRIENDSWOOD, TX 77546 PH: 281-992-2006 FX: 281-992-2040 EM:
HYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
Panel Carts refer Page 112. 136 Intex Price Guide All prices are exclusive of GST
Panel Carts refer Page 112 136 Intex Price Guide All prices are exclusive of GST Cradle outriggers easily adjust Fast action single stage winch with silent cam lock brake Unique tilting cradle for easy
T250 COMPACT TRACK LOADER SPECIFICATIONS
T250 COMPACT TRACK LOADER SPECIFICATIONS DIMENSIONS A) Operating Height...156.6" (3978 mm) B) Height with Operator Cab...80.9" (2055 mm) C) Angle of Departure...25 D) Ground Clearance...8.7" (221 mm) E)
Premium Conventional. General Tire Information. High quality; low operating cost. Pneumatic ride in extreme conditions.
Tire and Overview Premium Conventional 185-9932 254 mm (10 419 mm (16.5 185-9933 304 mm (12 419 mm (16.5 High quality; low operating cost. Skid Steer Loader Tires 5436 XD 222-3962 254 mm (10 419 mm (16.5
CASE IH: FOR THOSE WHO DEMAND MORE
CASE IH: FOR THOSE WHO DEMAND MORE www.caseih.com Safety never hurts! Always read the Operator s Manual before working with any equipment. Inspect equipment before using it, and be sure it is operating
All The Right Choices
Cat Undercarriage All The Right Choices Optimizing the value of your small and medium track machines with undercarriage options designed to match your applications and underfoot conditions. Carrying On
Table of Contents. Call 01295 690011 DYMAX LAND CLEARING TOOLS TABLE OF CONTENTS
Table of Contents Call 01295 690011 TABLE OF CONTENTS DYMAX LAND CLEARING TOOLS A Century of Commitment 3 Tree Shears for Hydraulic Excavators 4 10 Timberwolf Forestry Tree Shear 5 Timberwolf Forestry
584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb
584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight
Cutting the World. Cutting tools. for rotary drum cutters
Cutting the World Cutting tools for rotary drum cutters Round attack picks, pick boxes, retaining clips for erkat rotary drum cutters and cutter wheels erkat rotary drum cutters work under extremely hard
FTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
328D LCR. Hydraulic Excavator
328D LCR Hydraulic Excavator Engine Weights Engine Model Cat C7 ACERT Minimum Weight 33 270 kg 73,350 lb Net Flywheel Power 152 kw 204 hp Maximum Weight 39 845 kg 87,850 lb Features C7 with ACERT Technology
Audio Visual Equipment Projector Screen 50"x50" Projector, Lcd 2700 Lumens. Automotive Items Socket Set, 3/4" Automotive Tow Dolly, 2
COMPLETE OUTDOOR EQUIPMENT Rental Item List Air Tools and Equipment Air Compressor, Ac1-8gr Gas Air Compressor, Mi - T - M 115 V Air Compressor, A C 1-5 E, 4.1cfm Air Compressor, cfm tow behind Air Hose
Technical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
M26 T/30 T M40 T/50 T
M26 T/30 T M40 T/50 T Rough terrain specialist Capacity from 2600 kg to kg Lifting height from 3 m to 6 m 2- or 4-wheel drive models Motorization Turbo Euro III M: true rough terrain trucks The M trucks,
RT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
336E L. Hydraulic Excavator
336E L Hydraulic Excavator Engine Drive Engine Model Cat C9.3 (ATAAC) Maximum Travel Speed 4.9 km/h 3 mph Net Power SAE J1349 224 kw 300 hp Maximum Drawbar Pull 295 kn 66,319 f Weight Minimum Weight 36
D6R Series III Track-Type Tractor
D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping
ENGINE POWERED 5-10t. ~ r"." - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100
HELl ENGINE POWERED 5-10t I; ~ r"." d- - )5 F-ii'ii""i;~ CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 STANDARD SPECIFICATION Manufacturer HUI HELl ca., LTD. Model CPCD50 CPCD60 CPCD70 CPCD80 CPCD100 Load Capacity
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
316E L. Hydraulic Excavator
316E L Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maximum Travel Speed 5.2 km/h Power ISO 14396 (metric) 89 kw 121 hp Maximum Drawbar Pull 156.2 kn Weights Minimum Operating Weight 17
DRAIN CLEANING MACHINES
CLEANER, PIPE CLEANING, For blockages in bathroom, toilet & laundry Drain Cleaner H 75 With Bulb Head:DH75B ø20~75mm Manual Plastic wire drum for easy maintenance after use. High quality wire for smooth
SEAL SAVER * PROTECTIVE CYLINDER COVER APPLICATION UPDATE... PROVEN ON READY MIX TRUCKS FOR OVER 8 YEARS *PATENTED
SEAL SAVER * PROTECTIVE CYLINDER COVER APPLICATION UPDATE... PROVEN ON READY MIX TRUCKS FOR OVER 8 YEARS *PATENTED MTM BRIDGEMASTER CYLINDER CHUTE CYLINDER PROTECTS CYLINDER CHROME FROM ACID WASH, ROAD
THE VERSATILE A COMPLETE SOLUTION
THE VERSATILE A COMPLETE SOLUTION Emissions-compliant, fuel-efficient 134 HP Cummins diesel Quick Coupler and parallelogram lift arm linkage standard Third hydraulic spool optional Accepts a wide assortment
www.roofzone.com Updated for 2014 Roofing Products Catalog
www.roofzone.com Updated for 2014 Roofing Products Catalog Roof Zone by Tie Down Engineering offers a complete line of quality tools and equipment for the residential and commercial roofing contractor.
M320F. Wheeled Excavator
M320F Wheeled Excavator Engine Bucket Specifications Engine Model Cat C7.1 ACERT Bucket Capacities 0.35 m 3-1.18 m 3 Emissions EU Stage IV Working Ranges Net Power (Maximum) Maximum Reach at Ground Level
ROAD EQUIPMENT PROCUREMENT
ROAD EQUIPMENT PROCUREMENT AND UTILIZATION STUDY CTRE Project 01-101 Sponsored by the Highway Division of the Iowa Department of Transportation CTRE Center for Transportation Research and Education Final
WHEELED EXCAVATOR JS175W
WHEELED EXCAVATOR JS175W MAX. OPERATING WEIGHT: 18120 kg (39948 lb) ENGINE POWER: 128 kw (172 hp) G E F I H D C STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels
Built for Power. Engineered to Last.
Product Range Jaw Crushers Machine Weight: 54,000kgs (119,049lbs) Machine Weight: 53,000kgs (116,850lbs) 10570 TESAB ENGINEERING LTD. Gortrush Ind Est Omagh Co.Tyrone N.Ireland BT78 5EJ Tel: 0044 (0)28
Asking Price: N/A Final Price: N/A OROPS BUCKET AUXILIARY HYDRAULICS GENERAL APPEARANCE. Good. Good
Page 1 of 6 SPECIFICATIONS 2005 CATERPILLAR 247B Customer Owned Certified MULTI TERRAIN LOADERS Inspection Number: 1117842 Serial #: MTL01706 Date Created: 09/23/2013 02:53:31 PM CDT Engine Serial #: N/A
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
M318D MH. Wheel Material Handler
M318D MH Wheel Material Handler Engine Weights Engine Model Cat C6.6 with Operating Weight 19 000 to 41,888 to ACERT Technology 22 700 kg 50,045 lb Net Power (ISO 9249) 124 kw 166 hp Working Ranges Maximum