349E L. Hydraulic Excavator
|
|
- Amy Casey
- 7 years ago
- Views:
Transcription
1 349E L Hydraulic Excavator Engine Drive Engine Model Cat C13 ACERT Maximum Travel Speed 4.7 km/h.9 mph Net Power SAE J kw 396 hp Maximum Drawbar Pull 33 kn 7,300 f Weight Minimum Weight ,400 Maximum Weight ,00
2 Introduction Since its introduction in the 1990s, the 300 Series family of excavators has become the industry standard in general, quarry, and heavy construction applications. The all-new E Series and the 349E will continue that trend-setting standard. The 349E meets today s U.S. emissions standards. It is also built with several new fuel-saving and comfort-enabling features and benefi ts that will delight owners and operators. If you are looking for more productivity and comfort, less fuel consumption and emissions, and easier and more sensible serviceability, you will fi nd it in the all-new 349E and the E Series family of excavators. Contents Hydraulics...3 Operator Station...4 Engine... Structures and Undercarriage...6 Front Linkage...7 Work Tools...8 Integrated Technologies...10 Serviceability...11 Safety...1 Complete Customer Care...13 Sustainability...14 Specifications...1 Standard Equipment...3 Optional Equipment...33 Notes...34
3 Hydraulics Power to move more dirt, rock, and debris with speed and precision Hydraulic Horsepower Hydraulic horsepower is the actual machine power available to do work through implements and work tools. It s much more than just the engine power under the hood it s a core strength that differentiates Cat machines from other brands. Main Control Valve and Auxiliary Valves The 349E uses a high-pressure system to tackle the toughest of work in short order. The 349E uses a redesigned side-byside main control valve, which allows for auxiliary hydraulic lines and valve configurations to be simplified for greater reliability. Return Filter The return filter is a capsule-type design with a cartridge inside. Unlike many competitors offerings, the Cat cartridge features a handle to help remove and change oil without spillage or contamination. A sensor attached to the filter warns the operator if it is full or exceeds a certain pressure level. Swing Priority Circuit The swing priority circuit on the 349E uses a new electric valve that s operated by the machine s improved Electronic Control Module (ECM). Compared to using a hydraulic valve, an electric valve allows for more finely tuned control, which is critical during material loading. Electric Boom Regeneration Valve A new electric boom regeneration valve minimizes pump flow when the boom lowers down, which improves fuel economy. It is optimized for any dial speed setting being used by the operator, which in turn aids controllability and enhances component durability. Stick Regeneration Circuit The 349E regenerates the flow of oil from the rod end of the stick cylinder to the head end of the stick cylinder during low-load, stick-in operation an approach that saves energy and expense. 3
4 Operator Station Comfort and convenience to keep people productive Seats A new seat range includes mechanical, air suspension, heated, and air cooled options. Each option includes a reclining back, upper and lower seat slide adjustments, and height and tilt angle adjustments to meet operator needs for comfort and productivity. 1 Controls The right and left joystick consoles (1) can be adjusted to meet individual preferences, improving operator comfort and productivity during the course of a day. With the touch of the button, one-touch idle reduces engine speed to help save fuel; touch it again or move the joystick and the machine returns to normal operating level. The optional heavy lift mode increases machine system pressure to improve lift a nice benefit in certain situations. Heavy lift mode also reduces engine speed and pump flow in order to improve controllability. Monitor The 349E is equipped with a new LCD (Liquid Crystal Display) monitor () that s 40% bigger than the previous model s with higher resolution for better visibility. In addition to an improved keypad and added functionality, it s programmable to provide information in a choice of 4 languages to support today s diverse workforce. A new Engine Shutdown Setting accessible through the monitor allows owners and operators to specify how long the machine should idle before shutting down the engine, which can save significant amounts of fuel. In addition, the monitor serves as a display for the optional rearview camera. Up to two different camera images can be displayed on the screen. MP3-Ready Radio and Power Supply The standard radio is equipped with a new auxiliary audio port for MP3 players. Two 1-volt power supply sockets are located near key storage areas for charging. Storage Storage spaces are located in the front, rear, and side consoles. New space near the auxiliary power supply holds MP3 players and cell phones. The drink holder accommodates large mugs with handles, and a new shelf behind the seat stores large lunch or toooxes. Automatic Climate Control The climate control system features five air outlets with positive filtered ventilation, which makes working in the heat and cold much more pleasant. 4
5 Engine Reduced emissions, economical and reliable performance Cat C13 ACERT Engine The Cat C13 ACERT Tier 4 Interim engine is built to meet your demanding needs all day long. There is no interruption to your job process because the Cat regeneration system works automatically with no operator intervention required. If your operators are working in heat-restricted areas, they can use a manual override button (1) to move the machine before the regeneration process begins. Power Modes The 349E features three power modes to help manage fuel consumption: High power, standard power, and economy. Two additional fuel-saving features are automatic engine speed control and engine idle shutdown. Automatic engine speed control adjusts to the load, keeping speed low during light loading and idling and adjusting up for heavier loads. Engine idle shutdown automatically turns the engine off when idling for more than a specified amount of time that you set, which can save significant amounts of fuel and reduce emissions. Biodiesel-Ready Fuel System The 349E runs on ultra-low-sulfur diesel fuel, but you have added flexibility with the C13 ACERT engine because it s equipped to run on biodiesel fuel up to B0. Just fill it up and go.
6 Structures and Undercarriage Built to work in rugged environments Frame The upper frame includes new reinforced mountings to support a new Roll-Over Protective Structure (ROPS) cab; the lower frame is reinforced to increase component durability. Undercarriage Fixed and variable gauge long undercarriage systems are available to support various work applications. Heavy-duty track rollers, precision-forged carrier rollers, press-fit pin master joints, and enhanced track shoe bolts improve durability and reduce the risk of machine downtime and the need and cost to replace components. A new segmented three-piece guiding guard is now offered to maintain track alignment and improve performance in multiple applications. A redesigned motor housing prevents mud packing and debris buildup around seals. Counterweights The standard 9.0 mt (9.9 t) counterweight maintains large lifting capacity and excellent stability. A counterweight with removal device is available as an attachment to reduce the time required in preparation for transport. Both counterweights bolt directly to the main frame for added rigidity and feature an integrated housing for the new rearview camera option. 6
7 Front Linkage Made for high stress and long service life Booms and Sticks The 349E is offered with a range of booms and sticks. Each is built with internal baffle plates and stress-relieved for added durability, and each undergoes ultrasound inspection to ensure quality and reliability. Large box-section structures with thick, multi-plate fabrications, castings, and forgings are used in high-stress areas such as the boom nose, boom foot, boom cylinder, and stick foot to improve durability. Also, the boom nose pin retention method is a captured flag design for enhanced durability. Selections Two boom types are offered: HD = Heavy Duty Reach. HD is designed for general excavator applications such as multipurpose digging and loading, and it includes additional steel to make it more durable and better suited for more demanding applications like moving rock or using a hammer. ME = Mass Excavation. ME is best used for quarry, highvolume loading, and other demanding applications. The ME front provides higher digging forces due to the geometry of the boom and stick relationship. Bucket linkage and cylinders are also built for greater durability. 7
8 Work Tools You can dig, hammer, rip, and cut with confidence. Couplers: Quick Tool Changes Imagine the productivity you ll achieve with a quick coupler. Combine a robust coupler with a common work tool inventory that can be shared between same size machines and you ll get performance and flexibility on every job. The Cat Center-Lock pin grabber coupler features a patented locking system and highly visible lock. You can clearly see when the coupler is engaged or disengaged from the attachment. Work Tools: Cut, Crush, Pulverize and Load No matter your specialty, Caterpillar provides tools that are perfectly matched to get the most out of your Cat machine quickly and efficiently. Auxiliary hydraulic circuits are available to integrate any Cat work tool with your 349E. Buckets: Dig, Move, Load Cat buckets are designed to fill efficiently so you notice a fast, smooth cycle, which means high productivity each time you dig. Wear characteristics of general-duty, heavy-duty, and severe-duty buckets give you solid performance in a wide variety of material abrasions. Ditch cleaning and other specialty buckets are available when needed. 8
9 GRAB, SORT, LOAD SWAP TOOLS CUT, CRUSH, BREAK & RIP Center-Lock Pin Grabber Coupler DIG & PACK Multi-Processors Pro Series Hydraulic Thumbs Ditch Cleaning and Tilt Buckets Stiff Link Thumbs General Duty Buckets Scrap & Demolition Shears Demolition & Sorting Grapple Heavy Duty Buckets Secondary Pulverizers Severe Duty Buckets Contractors Grapples Extreme Duty Buckets Hydraulic Hammers Trash Grapples Vibratory Plate Compactors Rippers 9
10 Integrated Technologies Solutions that make work easier and more efficient Cat Grade Control Depth and Slope This optional system (1) combines traditional machine control and guidance with standard factoryinstalled and calibrated components, making the system ready to go to work the moment it leaves the factory. The system utilizes internal front linkage sensors well protected from the harsh working environment to give operators real-time bucket tip position information, which minimizes the need and cost for traditional grade checking and improves job site safety. It also helps the operator complete jobs in fewer cycles, which means less fuel use. Cat dealers can upgrade the system to full three-dimensional control by adding proven Cat AccuGrade positioning technologies, including GPS and Universal Total Station (UTS). Cat Product Link* This deeply integrated machine monitoring system is designed to help customers improve their overall fleet management effectiveness. Events and diagnostic codes as well as hours, fuel consumption, idle time, machine location, and other detailed information are transmitted to a secure web application called VisionLink, which uses powerful tools to communicate to users and dealers. *Product Link licensing not available in all areas. Please consult your Cat dealer for availability. 10
11 Serviceability Fast, easy and safe access built in Service Doors Wider service doors (1) feature sturdier hinges and latches and a new screen design to help prevent debris entry; a new two-piece hood provides easier access to the engine and cooling compartments. Compartments The radiator, pump, and air cleaner compartments provide easy access to major components. The fresh air filter () is located on the side of the cab to make it easier to reach and replace as needed. Other Service Improvements The water separator with water level sensor has a primary fuel filter element located in the pump compartment near ground level; the electric priming pump is mounted on the primary filter base and is easier to service than traditional hand-priming pumps. The fuel tank features a remote drain cock located in the pump compartment to make it easy to remove water and sediment during maintenance. The engine oil check gauge is situated in front of the engine compartment and is easy to remove. The engine oil filter is situated in the pump compartment for easy access. Changing engine oil is simple due to a unique drain cock designed to prevent spills. The optional Fast Fill Hydraulic Oil System and Fast Fill Engine Oil System make what typically takes hours achievable in minutes. 1 11
12 Safety Features to help protect people Reinforced Frame The upper frame is reinforced to accommodate the installation of a new ROPS cab with redesigned overhead guarding to protect operators. Sound Proofing Improved sealing and cab roof lining lower noise levels significantly during machine operation. 1 Anti-Skid Plates The surface of the upper structure and the top of the storage box area are covered with removable anti-skid plates to help prevent service personnel and operators from slipping during maintenance. Steps, Hand and Guard Rails Steps (1) on the track frame and storage box along with extended hand and guard rails to the upper deck enable operators to more securely work on the machine. High Intensity Discharge (HID) Lights Cab lights can be upgraded to HID for greater night time visibility. Visibility Windows Increased glass coverage improves visibility while meeting the latest ROPS regulations. The 70/30 split configuration features an upper window equipped with handles on the top and both sides so the operator can slide it to store in the ceiling. The lower window is removable and can be stored on the left wall of the cab shell. An available one-piece front windshield comes with a glass-breaking safety hammer. The newly designed skylight is larger than the previous series and provides greater overhead visibility, excellent natural lighting, and good ventilation. The skylight can be opened completely to become an emergency exit. Monitor Warning System The monitor is equipped with a buzzer that can warn an operator of critical events like Engine Oil Pressure Decrease, Coolant Temperature High, or Hydraulic Oil Temperature High, allowing for immediate action to take place. Rearview Camera A rearview camera () housed in the counterweight area is available as an attachment. The image projects through the cab monitor to give the operator a clear picture of what s behind the machine. 1
13 Complete Customer Care Service you can count on Product Support Cat dealers utilize a worldwide parts network to maximize your machines uptime. Plus they can help you save money with Cat remanufactured components. Machine Selection What are the job requirements and machine attachments? What production is needed? Your Cat dealer can provide recommendations to help you make the right machine choices. Purchase Consider financing options and day-to-day operating costs. Look at dealer services that can be included in the machine s cost to yield lower owning and operating costs over time. Customer Support Agreements Cat dealers offer a variety of customer support agreements and work with you to develop a plan to meet your specific needs. These plans can cover the entire machine, including attachments, to help protect your investment. Operation Improving operating techniques can boost your profits. Your Cat dealer has videos, literature, and other ideas to help you increase productivity. Caterpillar also offers simulators and certified operator training to help maximize the return on your investment. Replacement Repair, rebuild, or replace? Your Cat dealer can help you evaluate the cost involved so you can make the best choice for your business. 13
14 Sustainability Generations ahead in every way The C13 ACERT engine meets U.S. EPA Tier 4 Interim emissions regulations. The 349E performs the same amount of work while burning up to percent less fuel than the previous D Series model, which means more efficiency, less resources, and fewer CO emissions. The 349E has the flexibility of running on either ultra-low-sulfur diesel (ULSD) fuel with 1 ppm of sulfur or less or bio diesel (B0) fuel blended with ULSD. An overfill indicator rises when the tank is full to help the operator avoid spilling. Quick fill ports with connectors ensure fast, easy, and secure changing of hydraulic oil. The machine is built to be rebuilt with major structures and components remanufactured to reduce waste and replacement costs. The 349E is an efficient, productive machine that s designed to conserve our natural resources for generations ahead. 14
15 349E L Hydraulic Excavator Specifications Engine Engine Model Cat C13 ACERT Net Power SAE J kw 396 hp Gross Power SAE J199 3 kw 43 hp Bore 130 mm.1 in Stroke 17 mm 6.18 in Displacement 1. L 763 in 3 Weights Minimum Weight* ,400 Maximum Weight** ,00 * 6.9 m ('8") HD Reach boom, R3.3TB (11'0") HD stick, 9.0 mt (9.9 t) counterweight, Long FIX undercarriage, 3.1 m 3 (4.1 yd 3 ) bucket, 600 mm (4") DG shoes. ** 6. m (1'6") Mass boom, M3.0UB (9'10") HD stick, 9.0 mt (9.9 t) counterweight, Long VG undercarriage, 3. m 3 (4. yd 3 ) bucket, 900 mm (3") TG shoes. Hydraulic System Main System Maximum Flow (Total) 770 L/min 03 gal/min Swing System Maximum Flow 38 L/min 10 gal/min Maximum Pressure Equipment kpa,076 psi Maximum Pressure Equipment kpa,1 psi (Lift mode) Maximum Pressure Travel kpa,076 psi Maximum Pressure Swing 7 00 kpa 3,989 psi Pilot System Maximum Flow 7 L/min 7.1 gal/min Pilot System Maximum Pressure 410 kpa 98 psi Boom Cylinder Bore 170 mm 6.69 in Boom Cylinder Stroke 14 mm in Stick Cylinder Bore 190 mm 7.48 in Stick Cylinder Stroke 178 mm 69.1 in TB Family Bucket Cylinder Bore 160 mm 6.30 in TB Family Bucket Cylinder Stroke 136 mm 3.39 in UB Family Bucket Cylinder Bore 170 mm 6.69 in UB Family Bucket Cylinder Stroke 1396 mm 4.96 in Drive Maximum Travel Speed 4.7 km/h.9 mph Maximum Drawbar Pull 33 kn 7,300 f Swing Mechanism Swing Speed 8.7 rpm Swing Torque 148. kn m 109,00 f-ft Service Refill Capacities Fuel Tank Capacity 70 L 190 gal Cooling System 0 L 13. gal Engine Oil (with filter) 43 L 11.4 gal Swing Drive (each) 10 L.6 gal Final Drive (each) 1 L 4.0 gal Hydraulic System (including tank) 70 L 10.6 gal Hydraulic Tank 407 L 107. gal Track Number of Shoes (each side) Long Fix Undercarriage Long Variable Gauge Undercarriage Number of Track Rollers (each side) Long Fix Undercarriage 9 Long Variable Gauge Undercarriage 9 Number of Carrier Rollers (each side) Long Fix Undercarriage Long Variable Gauge Undercarriage 3 Sound Performance Operator Noise (Closed) ISO db(a) Spectator Noise ISO db(a) When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHA requirements for operator sound exposure limits in effect at time of manufacture. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in noisy environment. Standards Brakes ISO 106 Cab/FOGS SAE J136 Cab/ROPS ISO
16 349E L Hydraulic Excavator Specifications Dimensions Long FIX Undercarriage All dimensions are approximate Long Reach Boom HD Reach Boom Mass Boom 7.4 m (4'3") 6.9 m ('8") 6. m (1'6") Stick LR4.3TB R3.9TB R3.3TB M3.0UB M.UB (14'1") (1'10") (11'0") (9'10") (8'") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft) 1 Shipping Height to Boom 3690 (1'1") 3670 (1'1") 3730 (1'3") 400 (13'") 3980 (13'1") Shipping Height with Guard Rail 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10") 3610 (11'10") Shipping Length 1 40 (40'9") (39'") (39'1") (38'0") (38'4") 3 Tail Swing Radius 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") 4 Length to Center of Rollers 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4") 4360 (14'4") Track Length 370 (17'7") 370 (17'7") 370 (17'7") 370 (17'7") 370 (17'7") 6 Ground Clearance (including Shoe Lug Height) 10 (1'8") 10 (1'8") 10 (1'8") 10 (1'8") 10 (1'8") 7 Track Gauge 740 (9'0") 740 (9'0") 740 (9'0") 740 (9'0") 740 (9'0") 8 Transport Width 600 mm (4") Shoes 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0") 3340 (11'0") 70 mm (30") Shoes 3490 (11'") 3490 (11'") 3490 (11'") 3490 (11'") 3490 (11'") 900 mm (3") Shoes 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11") 9 Cab Height 30 (10'7") 30 (10'7") 30 (10'7") 30 (10'7") 30 (10'7") Cab Height with Top Guard 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1") 3390 (11'1") 10 Counterweight Clearance 180 (4'") 180 (4'") 180 (4'") 180 (4'") 180 (4'") 16
17 Dimensions Long VG Undercarriage All dimensions are approximate Long Reach Boom HD Reach Boom Mass Boom 7.4 m (4'3") 6.9 m ('8") 6. m (1'6") Stick LR4.3TB R3.9TB R3.3TB M3.0UB M.UB (14'1") (1'10") (11'0") (9'10") (8'") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft) 1 Shipping Height to Boom 360 (1'0") 360 (1'0") 30 (11'8") 400 (13'") 4010 (13'") Shipping Height with Guard Rail 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") Shipping Length (40'7") (39'0") (38'9") (37'11") (38'") 3 Tail Swing Radius 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") 3760 (1'4") 4 Length to Center of Rollers 4340 (14'3") 4340 (14'3") 4340 (14'3") 4340 (14'3") 4340 (14'3") Track Length 380 (17'8") 380 (17'8") 380 (17'8") 380 (17'8") 380 (17'8") 6 Ground Clearance (including Shoe Lug Height) 740 ('") 740 ('") 740 ('") 740 ('") 740 ('") 7 Track Gauge (Expanded) 890 (9'6") 890 (9'6") 890 (9'6") 890 (9'6") 890 (9'6") Track Gauge (Retracted) 390 (7'10") 390 (7'10") 390 (7'10") 390 (7'10") 390 (7'10") 8 Transport Width (Expanded) 600 mm (4") Shoes 3490 (11'") 3490 (11'") 3490 (11'") 3490 (11'") 3490 (11'") 70 mm (30") Shoes 3640 (1'0") 3640 (11'11") 3640 (11'11") 3640 (11'11") 3640 (11'11") 900 mm (3") Shoes 3790 (1'") 3790 (1'") 3790 (1'") 3790 (1'") 3790 (1'") Transport Width (Retracted) 600 mm (4") Shoes 3000 (9'10") 3000 (9'10") 3000 (9'10") 3000 (9'10") 3000 (9'10") 70 mm (30") Shoes 3140 (10'4") 3140 (10'4") 3140 (10'4") 3140 (10'4") 3140 (10'4") 900 mm (3") Shoes 390 (10'10") 390 (10'10") 390 (10'10") 390 (10'10") 390 (10'10") 9 Cab Height 3370 (11'1") 3370 (11'1") 3370 (11'1") 3370 (11'1") 3370 (11'1") Cab Height with Top Guard 340 (11'7") 340 (11'7") 340 (11'7") 340 (11'7") 340 (11'7") 10 Counterweight Clearance 1430 (4'8") 1430 (4'8") 1430 (4'8") 1430 (4'8") 1430 (4'8") 17
18 349E L Hydraulic Excavator Specifications Working Ranges All dimensions are approximate. Feet Meters 40 Feet Meters LR4.3TB R3.9TB With Quick Coupler R3.9TB Without Quick Coupler R3.3TB With Quick Coupler R3.3TB Without Quick Coupler M3.0UB Without Quick Coupler M.UB Without Quick Coupler Meters Meters Feet Feet Long Reach Boom 7.4 m (4'3") HD Reach Boom 6.9 m ('8") Mass Boom 6. m (1'6") Stick LR4.3TB R3.9TB R3.3TB M3.0UB M.UB (14'1") (1'10") (11'0") (9'10") (8'") mm (ft) mm (ft) mm (ft) mm (ft) mm (ft) Long FIX Undercarriage 1 Maximum Digging Depth 8910 (9'3") 8180 (6'10") 7630 ('0") 730 (3'9") 6730 (3'1") Maximum Reach at Ground Level (4'") 1 10 (39'9") (38'") (36'9") (3'3") 3 Maximum Cutting Height (36'7") (3'") (3'6") (33'10") (33'") 4 Maximum Loading Height 7890 ('11") 740 (4'") 7460 ('6") 680 ('") 660 (1'9") Minimum Loading Height 0 (7'") 30 (7'4") 780 (9'1") 60 (8'8") 310 (10'4") 6 Maximum Depth Cut for 440 mm (8'0") 8790 (8'10") 800 (6'") 7490 (4'7") 7080 (3'3") 660 (1'6") Level Bottom 7 Maximum Vertical Wall Digging Depth 6480 (1'3") 890 (19'4") 760 (18'11") 470 (1'0") 4140 (13'7") 18
19 Working Ranges All dimensions are approximate. Feet Meters 40 Feet Meters LR4.3TB R3.9TB With Quick Coupler R3.9TB Without Quick Coupler R3.3TB With Quick Coupler R3.3TB Without Quick Coupler M3.0UB Without Quick Coupler M.UB Without Quick Coupler Meters Meters Feet Feet Long Reach Boom HD Reach Boom Mass Boom 7.4 m (4'3") 6.9 m ('8") 6. m (1'6") Stick LR4.3TB R3.9TB R3.3TB M3.0UB M.UB (14'1") (1'10") (11'0") (9'10") (8'") Long VG Undercarriage mm (ft) mm (ft) mm (ft) mm (ft) mm (ft) 1 Maximum Digging Depth 8770 (8'9") 8040 (6'") 7490 (4'7") 7140 (3'") 6640 (1'9") Maximum Reach at Ground Level (4'4") (39'8") (38'4") 11 0 (36'10") (3'4") 3 Maximum Cutting Height (37'1") (3'4") (3'8") (37'6") (33'7") 4 Maximum Loading Height 8040 (6'") 790 (4'11") 7610 ('0") 6910 ('8") 670 ('1") Minimum Loading Height 400 (7'11") 370 (7'9") 90 (9'7") 740 (9'0") 340 (10'8") 6 Maximum Depth Cut for 440 mm (8'0") 8640 (8'4") 7900 ('11") 7340 (4'1") 6990 ('11") 6740 ('1") Level Bottom 7 Maximum Vertical Wall Digging Depth 6340 (0'10") 70 (18'3") 170 (17'0") 4340 (14'3") 3910 (1'10") 19
20 349E L Hydraulic Excavator Specifications Operating Weight and Ground Pressure 900 mm (3") 70 mm (30") 600 mm (4") Triple Grouser Shoes Triple Grouser Shoes Double Grouser Shoes () kpa (psi) () kpa (psi) () kpa (psi) Long FIX Undercarriage Long Reach Boom 7.4 m (4'3") LR4.3TB HD (14'1") (110,00) 8.0 (8.4) (108,700) 68.0 (9.9) (107,100) 84.0 (1.) HD Reach Boom 6.9 m ('8") R3.9TB HD (1'10") (109,100) 7.0 (8.3) (107,600) 68.0 (9.9) (106,000) 83.0 (1.0) R3.3TB HD (11'0") (108,00) 7.0 (8.3) (106,900) 67.0 (9.7) (10,400) 83.0 (1.0) Mass Boom 6. m (1'6") M3.0UB HD (9'10") 0 00 (111,300) 8.0 (8.4) (109,600) 69.0 (10.0) (108,00) 8.0 (1.3) M.UB HD (8'") 0 00 (110,700) 8.0 (8.4) (109,100) 69.0 (10.0) (107,600) 8.0 (1.3) Long VG Undercarriage Long Reach Boom 7.4 m (4'3") LR4.3TB HD (14'1") 700 (116,00) 61.0 (8.8) 000 (114,600) 7.0 (10.4) 1 00 (11,900) 89.0 (1.9) HD Reach Boom 6.9 m ('8") R3.9TB HD (1'10") 00 (11,100) 61.0 (8.8) 1 00 (113,00) 7.0 (10.4) (111,800) 88.0 (1.8) R3.3TB HD (11'0") 000 (114,600) 60.0 (8.7) 1 00 (11,900) 71.0 (10.3) 0 00 (111,300) 88.0 (1.8) Mass Boom 6. m (1'6") M3.0UB HD (9'10") (117,00) 6.0 (9.0),00 (11,700) 73.0 (10.6) (114,00) 90.0 (13.1) M.UB HD (8'") (116,800) 6.0 (9.0),300 (11,300) 73.0 (10.6) 1 00 (113,00) 90.0 (13.1) 0
21 Major Component Weights* Base machine (with boom cylinder, without counterweight, front linkage and track) Long FIX Undercarriage ,400 Long VG Undercarriage ,100 Counterweight 9.0 mt (9.9 t) ,800 Boom (includes lines, pins and stick cylinder) Long Reach Boom 7.4 m (4'3") ,600 Reach Boom 6.9 m ('8") 410 9,940 Mass Boom 6. m (1'6") ,470 Stick (includes lines, pins and bucket cylinder) LR4.3TB HD (14'1") 960 6,30 R3.9TB HD (1'10") 70 6,060 R3.3TB HD (11'0") 480,470 M3.0UB (9'10") 930 6,460 M.UB (8'") 700,90 Track Shoes (Long FIX/per two tracks) 600 mm (4") double grouser 40 11,60 70 mm (30") triple grouser 890 1, mm (3") triple grouser ,640 Track Shoes (Long VG/per two tracks) 600 mm (4") double grouser , mm (4") triple grouser , mm (30") triple grouser , mm (3") triple grouser ,780 Buckets TB1880GD 3.10 m 3 (4.0 yd 3 ) 440,400 UB180HD 3. m 3 (4.19 yd 3 ) 740 6,040 *Base machine includes 7 (16 ) operator weight, 90% fuel weight, and undercarriage with center guard. 1
22 349E L Hydraulic Excavator Specifications Bucket and Stick Forces Long Reach Boom HD Reach Boom Mass Boom 7.4 m (4'3") 6.9 m ('8") 6. m (1'6") Stick LR4.3TB R3.9TB R3.3TB M3.0UB M.UB (14'1") (1'10") (11'0") (9'10") (8'") kn (f) kn (f) kn (f) kn (f) kn (f) TB Linkage General Duty Bucket Digging Force (SAE) 37 (3,300) 37 (3,300) 60 (8,00) 60 (8,00) Stick Digging Force (SAE) 180 (40,00) 19 (43,800) 0 (46,100) 31 (1,900) Heavy Duty Bucket Digging Force (SAE) 38 (3,00) 37 (3,300) 37 (3,300) 60 (8,00) 60 (8,00) Stick Digging Force (SAE) 168 (37,800) 180 (40,00) 19 (43,800) 0 (46,100) 31 (1,900) Severe Duty Bucket Digging Force (SAE) 36 (3,100) 37 (3,300) 37 (3,300) (7,300) (7,300) Stick Digging Force (SAE) 168 (37,800) 180 (40,00) 19 (43,800) 04 (4,900) 30 (1,700) Extreme Duty Bucket Digging Force (SAE) 36 (3,100) 37 (3,300) 37 (3,300) Stick Digging Force (SAE) 16 (37,100) 180 (40,00) 19 (43,800) CW- Linkage General Duty Bucket Digging Force (SAE) 04 (4,900) 04 (4,900) Stick Digging Force (SAE) 169 (38,000) 18 (40,900) Heavy Duty Bucket Digging Force (SAE) 1 (47,700) 1 (47,700) 38 (3,00) 38 (3,00) Stick Digging Force (SAE) 173 (38,900) 04 (4,900) 197 (44,300) 1 (49,700) Severe Duty Bucket Digging Force (SAE) 04 (4,900) 0 (46,100) 0 (46,100) 33 (,400) 34 (,400) Stick Digging Force (SAE) 17 (3,300) 170 (38,00) 184 (41,400) 196 (44,100) 19 (49,00)
23 349E L (LC-FIX) Long Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 7.4 m (4'3") Counterweight 9.0 mt (9.9 t) Bucket None Stick LR4.3TB (14'1") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft 10. m/3.0 ft 9.0 m *710 * ft *1,800 *1, m * *690 * ft *0,800 18,00 *1,0 *1, m * * * ft *,00 17,700 *1,00 13, m *14 00 *14 00 * * * ft *30,60 *30,60 *6,00,80 *3,40 17,100 *19,70 13,10 *1,0 1, m * * * * * ft *49,90 4,00 *36,00 9,90 *9,00 1,600 *,00 16,30 0,600 1,70 *16,300 11, m *18 90 *18 90 * * * ft *44,90 41,70 *40,700 7,900 *31,90 0,400,0 1,60 0,00 1,30 *17,40 11, Ground *18 10 *18 10 * Line *41,800 40,00 *43,00 6,0 3,60 19,00 4,900 1,100 19,80 1,00 18,900 11, m *1 00 *1 00 * * ft *7,00 *7,00 *49,700 39,00 *44,00,80 3,000 18,90 4,00 14,70 19,80 1, m *14 10 *14 10 * * * * ft *31,600 *31,600 *40,00 *40,00 *6,40 39,600 *4,80,700 31,800 18,70 4,400 14,60 1,70 13, m *4 00 *4 00 * * * * * ft *,300 *,300 *0,60 40,0 *39,00,90 *30,900 18,90 *4,70 1, m * 00 * 00 *19 0 *19 0 * * * ft *41,100 *41,100 *3,100 6,70 *4,00 0, *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft 3
24 349E L Hydraulic Excavator Specifications 349E L (LC-VG) Long Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 7.4 m (4'3") Counterweight 9.0 mt (9.9 t) Bucket None Stick LR4.3TB (14'1") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft 10. m/3.0 ft 9.0 m *710 *710 *7100 * ft *1,700 *1, m * *6900 * ft *1,300 19,900 *1,0 *1, m * * * ft *,10 19,0 *1,0 1, m *14 40 *14 40 * * * * ft *31,00 *31,00 *6,40,10 *3,600 18,900 *0,00 14,60 *1,600 13, m * * * * * ft *0,900 0,00 *36,0 33,00 *9,00 3,80 *,30 18,10 1,00 14,0 *16,400 13, m *18 00 *18 00 * * * ft *43,700 *43,700 *41,00 31,00 *3,00,700 6,600 17,40 1,100 13,80 *17,600 1, Ground *700 *700 *18 30 *18 30 * * * Line *16,90 *16,90 *4,0 *4,0 *43,60 9,70 34,000 1,800 6,000 16,900 0,70 13,0 *19,00 1, m *1 70 *1 70 * * ft *8,60 *8,60 *0,800 44,70 *44,10 9,100 33,400 1,300,600 16,0 0,900 13, m *14 60 *14 60 * * * * ft *3,60 *3,60 *41,400 *41,400 *6,000 44,90 *4,600 9,000 33,0 1,10,0 16,00 3,00 14, m * 00 * 00 * * * * ft *7,000 *7,000 *49,900 4,600 *38,700 9,300 *30,00 1,400 *4,70 17, m * * * * ft *39,90 *39,90 *31,100 30,00 *4,400 3, *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft 4
25 349E L (LC-FIX) HD Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 6.9 m ('8") Counterweight 9.0 mt (9.9 t) Bucket None Stick R3.9TB (1'10") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft m ft 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft 6.0 m 0.0 ft *790 *790 *18,900 *18,900 *17,60 *17,60 *7600 *7600 *16,800 *16,800 * * * *,80 4,400 *3,10 18,10 *16,600 16,40 *1 100 *1 100 * * * *3,600 *3,600 *8,300 3,0 *,70 17,70 *16,80 14,900 * * * * * *1,80 47,400 *38,100 31,10 *31,0,0 7,00 17,00 *17,600 14,000 * * * * *60,100 44,00 *4,80 9,40 *34,000 1,0 6,40 16,60 *18,900 13,700 * * * *,00 4,60 *4,60 8,300 33,90 0,80 6,000 16,00 *0,90 13,900 *1 30 *1 30 * * *34,600 *34,600 *6,10 4,00 *46,00 7,700 33,00 0,400,70 1,90 3,00 14,60 * 400 * 400 * * *38,700 *38,700 *0,00 *0,00 *8,10 4,300 *44,0 7,60 33,400 0,30 6,300 16,30 * * * * * * *68,000 *68,000 *0,700 43,000 *39,100 8,000 *9,900 0,700 *8,100 19,70 * * * *1 300 *1 300 *37,60 *37,60 *7,900 *7,900 *6,80 *6, Boom 6.9 m ('8") Counterweight 9.0 mt (9.9 t) Bucket None Stick R3.3TB (11'0") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft *900 * *0,10 *0, * *80 * *6,600 4,40 *18,80 *18, * * * *7,60 4,00 *0,30 17,80 *18,40 17, *14 90 *33,70 *3 900 *3,90 *7 80 *60,100 *14 90 *33,70 *3 900 *3,90 *7 80 *60,100 *1 000 *4,000 *6 00 *6,000 *18 60 *44,600 *1 000 *48,70 *8 100 *61,000 * 70 *,800 *1 70 *46,800 *1 000 *4, ,300 * , , , , ,70 *16 00 *3,00 *18 60 *40,0 *0 0 *44,40 *1 40 *46,40 *1 0 *46,00 *19 90 *43,100 * *36, , , , , , , ,0 * *9,90 *1 100 *3, , , , , , , , , , ,60 *1 40 *7, , , , , , , , , ,10 *800 *18,700 *880 *19,40 *940 *0,800 *10 40 *3, , *8,60 *1 800 *8, , , , , , ,80 990, *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft
26 349E L Hydraulic Excavator Specifications 349E L (LC-VG) HD Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 6.9 m ('8") Counterweight 9.0 mt (9.9 t) Bucket None Stick R3.9TB (1'10") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft m ft 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft 6.0 m 0.0 ft *7900 *7900 *17,0 *17,0 *790 *790 *7600 *7600 *16,70 *16,70 *11 90 *11 90 * *70 *70 *6,00 *6,00 *3,800 0,000 *16,600 *16,600 *1 30 *1 30 * * * *33,100 *33,100 *8,0,80 *,900 19,0 *16,900 16,400 * * * * * *,80,40 *38,600 34,300 *31,0 4,80 *7,40 19,000 *17,700 1,0 * * * * *9,0 49,30 *43,00 3,600 *34,0 3,900 7,0 18,40 *19,00 1,0 *9700 *9700 * * * *,000 *,000 *,700 47,900 *4,80 31,00 3,30 3,10 7,100 18,00 *1,00 1,0 * * * * * *36,000 *36,000 *61,900 47,00 *46,100 31,000 34,900,70 6,80 17,800 *4,60 16,00 *3 10 *3 10 * * * *,0 *,0 *7,600 47,700 *43,900 30,90 *34,00,700 7,80 18,00 *30 80 *30 80 * * * * *66,00 *66,00 *49,70 48,400 *38,400 31,30 *9,100 3,10 *8,100,0 *17 00 *17 00 *1 700 *1 700 *1 10 *1 10 *7,300 *7, Boom 6.9 m ('8") Counterweight 9.0 mt (9.9 t) Bucket None Stick R3.3TB (11'0") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft *9000 * *19,90 *19, *1 10 *1 10 *800 * *6,60 *6,60 *18,800 *18, * * *8400 * *7,80 6,400 *1,60 19,700 *18,40 *18, *1 800 *3,600 *4 80 *6,10 *7 100 *8,40 *1 800 *3,600 *4 80 *6,10 *7 100 *8,40 *1 00 *46,100 *6 00 *6,80 *18 0 *44,10 *1 0 *49,900 *7 900 *60,600 * 40 *,100 *1 0 *4,700 *1 00 *46, ,30 *18 0 *44,10 *1 0 48, , ,300 *1 0 *4,700 *16 40 *3,0 *18 80 *40,700 *0 700 *44,700 *1 00 *46,00 *1 00 *4,900 *19 70 *4,60 * *3,40 *16 40 *3, , , , , , ,900 * *30,00 *1 00 *3,90 * *3, , ,00 *1 00 *33, , , , , , ,00 *1 00 *7, , , , , , , , , ,00 *800 *18,70 *8900 *19,0 *90 *1,000 * *3, ,60 * *8,60 *1 70 *8, , , , , , , , *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft 6
27 349E L (LC-FIX) Mass Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 6. m (1'6") Counterweight 9.0 mt (9.9 t) Bucket None Stick M3.0UB (9'10") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft * * * *,00 *, * * *8,30 3,100 *1,400 19, *0 900 *0 900 * * * * *44,800 *44,800 *3,00 31,600 *30,10,30 *1,600 16, * * * * *,100 4,10 *39,80 9,70 *3,00 1,400 6,00 16,10 *,00 1, * * * *,00 4,400 *43,60 8,10 33,800 0,0,600 1,70 *4,0 1, * * *60,00 41,30 *4,300 7,00 33,100 19,90,40 1, *17 80 *17 80 * * *40,400 *40,400 *8,800 41,0 *44,400 6,80 3,800 19,700 7,60 16, *9 400 *9 400 * * * * *66,60 *66,60 *,0 41,700 *40,400 7,00 *30,40 19,90 *9,60 19,600.3 * * * * *41,300 *41,300 *30,70 7,90 *8,300 6, m ft Boom 6. m (1'6") Counterweight 9.0 mt (9.9 t) Bucket None Stick M.UB (8'") Shoes 900 mm (3") triple grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m 30.0 ft 7. m * ft *8,900 6, m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft *18 00 *41,10 *8 000 *61,000 *18 00 *41,10 *8 000 *61,000 * 70 *48,800 *8,30 *3 90 *6,30 *6 0 *7,00 * 900 *49, ,40 44, , , ,0 *1 30 *33,300 *17 0 *37,0 * *41,70 *0 800 *44,90 *1 10 *4,800 *0 300 *43,90 * *38, , , , , , , ,60 *13 80 *30,30 * *31,800 *1 600 *33, , , , , , , , , ,100 *1 700 *7,90 *1 80 *8, , , , ,0 * *31, , , , , , , , m *16 90 *16 90 *1 900 * ft *36,00 *36,00 *8,100 *8, *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft 7
28 349E L Hydraulic Excavator Specifications 349E L (LC-FIX) Mass Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom 6. m (1'6") Counterweight 9.0 mt (9.9 t) Bucket None Stick M3.0UB (9'10") Shoes 600 mm (4") double grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m/30.0 ft 9.0 m 30.0 ft 7. m.0 ft 6.0 m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft 4. m 1.0 ft * * * *,00 *, * * *8,30,0 *1,400 18, *0 900 *0 900 * * * * *44,800 *44,800 *3,00 30,900 *30,10 1,800 *1,600 16, * * * * *,100 44,00 *39,80 9,000 *3,00 0,80,30 1,700 *,00 1, * * *,00 41,300 *43,60 7,40 3,80 0,000 4,80 1,300 4,00 14, * * *60,00 40,0 *4,300 6,40 3,10 19,30 4,70 1, *17 80 *17 80 * * *40,400 *40,400 *8,800 40,10 *44,400 6,100 31,900 19,10 6,80 16, *9 400 *9 400 * * * * *66,60 *66,60 *,0 40,600 *40,400 6,300 *30,40 19,400 *9,60 19,00.3 * * * * *41,300 *41,300 *30,70 7,0 *8,300, m ft Boom 6. m (1'6") Counterweight 9.0 mt (9.9 t) Bucket None Stick M.UB (8'") Shoes 600 mm (4") double grouser Heavy Lift Mode On 1. m/.0 ft 3.0 m/10.0 ft 4. m/1.0 ft 6.0 m/0.0 ft 7. m/.0 ft 9.0 m 30.0 ft 7. m * ft *8,900 6, m 0.0 ft 4. m 1.0 ft 3.0 m 10.0 ft 1. m.0 ft Ground Line 1. m.0 ft 3.0 m 10.0 ft *18 00 *41,10 *8 000 *61,000 *18 00 *41,10 *8 000 *61,000 * 70 *48,800 *8,30 *3 90 *6,30 *6 0 *7,00 * 900 *49, ,300 43, , , ,40 *1 30 *33,300 *17 0 *37,0 * *41,70 *0 800 *44,90 *1 10 4,700 *0 300 *43,90 * *38, , , , , , , ,900 *13 80 *30,30 * *31,800 * , , , , , , , , , ,0 *1 700 *7,90 *1 80 *8, , , , ,700 * *31, , , , , , , , m *16 90 *16 90 *1 900 * ft *36,00 *36,00 *8,100 *8, *Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 1067:007. They do not exceed 87% of hydraulic lifting capacity or 7% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Lift capacity stays with ±% for all available track shoes. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m ft 8
29 349E L Work Tool Offering Guide* Boom Type Reach Boom (HD) Mass Boom Stick Size R3.9 (HD) (1'10") R3.3 (HD) (11'0") M3.0 (9'10") M. (8'") Hydraulic Hammer H160Ds H160Ds H160Ds H160Ds H180Ds H180Ds H180Ds H180Ds Multi-Processor MP30 MP30 MP30 MP30 Mobile Scrap and Demolition Shear S340B S340B S340B S340B S36C** S36C** S36C** S36C** S38C** S38C** S38C** S38C** Contractors Grapple G330 G330 G330 G330 Trash Grapple Thumbs Rippers Center-Lock Pin Grabber Coupler Dedicated Quick Coupler *Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match. **Boom Mount These work tools are available for the 349E. Consult your Cat dealer for proper match. 9
30 349E L Hydraulic Excavator Specifications 349E L Bucket Specifications and Compatibility Without Quick Coupler General Duty (GDC) General Duty XL (GDXL) Heavy Duty (HD) Severe Duty (SD) Extreme Duty (XD) HD Long Width Capacity Weight Fill Reach Boom Reach Boom (HD) Mass Boom LR4.3 R3.9 HD R3.3 HD M3.0 M. Linkage mm in m 3 yd 3 % (14'1") (1'10") (11'0") (9'10") (8'") TB , % TB , % TB , % TB , % TB ,90 100% TB ,8 100% TB , % TB , % TB ,30 100% TB ,13 100% TB ,71 100% TB , % TB ,30 100% TB , % TB , % TB , % UB , % UB , % UB , % TB ,187 90% TB ,696 90% TB ,91 90% TB ,30 90% TB ,80 90% TB ,48 90% TB ,63 90% TB ,008 90% UB ,98 90% UB ,83 90% TB ,90 90% TB ,1 90% Maximum load pin-on (payload + bucket) ,960 13,687 14,833 1,869 17,61 Maximum Material Density: 100 /m 3 (3,00 /yd 3 ) The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity or 7% of tipping capacity with front linkage fully 1800 /m 3 (3,000 /yd 3 ) extended at ground line with bucket curled. 100 /m 3 (,00 /yd 3 ) Capacity based on ISO /m 3 (,000 /yd 3 ) Bucket weight with General Duty tips. 900 /m 3 (1,00 /yd 3 ) Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick. 30
336E L. Hydraulic Excavator
336E L Hydraulic Excavator Engine Drive Engine Model Cat C9.3 (ATAAC) Maximum Travel Speed 4.9 km/h 3 mph Net Power SAE J1349 224 kw 300 hp Maximum Drawbar Pull 295 kn 66,319 f Weight Minimum Weight 36
More information320E L. Hydraulic Excavator
320E L Hydraulic Excavator Engine Drive Engine Model Cat C6.6 ACERT Maximum Travel Speed 5.6 km/h 3.5 mph Net Power SAE J1349 114 kw 153 hp Maximum Drawbar Pull 205 kn 46,086 f Gross Power SAE J1995 122
More information329E. Hydraulic Excavator
329E Hydraulic Excavator Engine Weight Engine Model Cat C7.1 ACERT Minimum Operating Weight 29 057 kg 64,060 lb Net Power SAE J1349/ISO 9249 173 kw 232 hp Maximum Operating Weight 31 279 kg 68,958 lb Drive
More information301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
More information316E L. Hydraulic Excavator
316E L Hydraulic Excavator Engine Drive Engine Model Cat C4.4 ACERT Maximum Travel Speed 5.2 km/h Power ISO 14396 (metric) 89 kw 121 hp Maximum Drawbar Pull 156.2 kn Weights Minimum Operating Weight 17
More information307E. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo. Weights
307E Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights Operating Weight 6800
More information303.5E CR, 304E CR, 305E CR, 305.5E CR
303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw
More information308E CR SB. Mini Hydraulic Excavator with Swing Boom
308E CR SB Mini Hydraulic Excavator with Swing Boom Engine Weights Engine Model Cat C3.3B Operating Weight with Cab 8333 kg 18,371 lb Net Power (ISO 9249) 48.5 kw 65 hp Operating Specifications Maximum
More information323E. Hydraulic Excavator
323E Hydraulic Excavator Engine Weights Engine Model Cat C6.6 ACERT 323E L: Engine Rated Power ISO 14396 121 kw (165 hp) Minimum Weight 22 900 kg Drive Maximum Weight 25 200 kg Maximum Travel Speed 5.6
More information336D2. Hydraulic Excavator
336D2 Hydraulic Excavator Engine Weights Engine Model Cat C9 Operating Weight Standard Undercarriage 34 489 kg 76,035 lb Engine Power (ISO 14396) 209 kw 280 hp Operating Weight Long Undercarriage 37 086
More information304C CR Mini Hydraulic Excavator
304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight
More information303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR
303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)
More information303.5C CR Mini Hydraulic Excavator
303.5C CR Mini Hydraulic Excavator Engine Model Mitsubishi S3Q2-T Rated net power 29 kw 39 hp (ISO 9249) Weights Operating weight 3790 kg 8,355 lb with canopy Operating weight 3910 kg 8,620 lb with cab
More information336F L/LN. Hydraulic Excavator. Engine Engine Model. Drive Maximum Travel Speed Maximum Drawbar Pull Weights. Cat C9.3 ACERT
336F L/LN Hydraulic Excavator Engine Engine Model Power ISO 14396 (metric) Power ISO 9249 (metric) Cat C9.3 ACERT 236 kw (321 hp) 226 kw (307 hp) Drive Maximum Travel Speed Maximum Drawbar Pull Weights
More information304.5. Mini Hydraulic Excavator
304.5 Mini Hydraulic Excavator Cat 3024 Naturally Aspirated Diesel Engine Flywheel Power 28 kw 38 hp Operating Weight: With cab 4595 kg 10130 lb With canopy 4475 kg 9866 lb 304.5 Mini Hydraulic Excavator
More information308D CR. Mini Hydraulic Excavator with Swing Boom. Engine Power. Weight
308D CR Mini Hydraulic Excavator with Swing Boom Engine Power Net power Gross power Weight Operating weight 41.5 kw/56.5 hp 43.0 kw/58.5 hp 8440 kg Features 308D CR with Swing Boom Controllability Perfectly
More information568 Engine Drive Weight*
68 Forest Machine Engine Drive Engine Model Cat C9.3 (ATAAC) Maximum Travel Speed 4.8 km/h 3 mph Gross Power 238 kw 319 hp Maximum Drawbar Pull 317 kn 71,264 lbf Rated Power 221 kw 296 hp Weight* Rated
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More information328D LCR. Hydraulic Excavator
328D LCR Hydraulic Excavator Engine Weights Engine Model Cat C7 ACERT Minimum Weight 33 270 kg 73,350 lb Net Flywheel Power 152 kw 204 hp Maximum Weight 39 845 kg 87,850 lb Features C7 with ACERT Technology
More information340D L. Hydraulic Excavator. Engine Engine Model. Weights. ACERT Technology
340D L Hydraulic Excavator Engine Engine Model Net Power at 1,800 rpm ISO 14396 Gross Power (SAE J1995) Cat C9 with ACERT Technology 209 kw (285 hp) 213 kw (290 hp) Weights Operating Weight Drive Maximum
More informationE08 E10. Compact Excavators
E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition
More informationD6R Series III Track-Type Tractor
D6R Series III Track-Type Tractor Engine Engine Model Cat C9 ACERT Net Power ISO 9249 138 kw 185 hp Engine XL/XW/LGP Net Power ISO 9249 149 kw 200 hp Weights Operating Weight 18 669 kg 41,159 lb Shipping
More informationVOLVO WHEEL LOADERS BLOCK HANDLING
VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially
More informationTechnical Description LR 611 Crawler Loader
Technical Description LR 611 Crawler Loader Engine output 66 kw/90 HP Bucket capacity 1.0 1.2 m 3 /1.31 1.57 cu.yd. Hydrostatic travel drive The Better Machine. Diesel Engine Liebherr-Diesel Engine D 924
More informationRH 12.5 RH 16.5. Crawler Excavator Specifications
Crawler Excavator Specifications RH 12.5 RH 16.5 RH 12.5 RH 16.5 Service weight t 34.1-38.1 39.9-43.6 Engine output kw 195 195 Trenching buckets (SAE) up to m 3 2.2 2.6 PMS three-pump hydraulics Electronic
More information584 / 584HD. Forwarders. Engine. Operating Weight 584 6WD 20 230 kg 44,600 lb 584 8WD 22 498 kg 49,600 lb 584HD 23 088 kg 50,900 lb
584 / 584HD Forwarders Engine Engine Model Cat C7 ACERT Gross Power 204 kw 274 hp Operating Specifications Load Capacity 584 18 000 kg 39,683 lb Load Capacity 584HD 20 000 kg 44,092 lb Operating Weight
More informationM318D MH. Wheel Material Handler
M318D MH Wheel Material Handler Engine Weights Engine Model Cat C6.6 with Operating Weight 19 000 to 41,888 to ACERT Technology 22 700 kg 50,045 lb Net Power (ISO 9249) 124 kw 166 hp Working Ranges Maximum
More information216B/226B/236B Series 3 242B/252B Series 3
216B/226B/236B 242B/252B Skid Steer Loaders 216B 226B 236B 242B 252B Engine Engine Model Cat C2.2 Cat C2.2 T Cat C3.4 DIT Cat C3.4 DIT Cat C3.4 DIT Net Power (SAE 1349/ISO 9249) 35 kw (47 hp) 42 kw (56
More informationPC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³
PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product
More informationJCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length
More informationnet flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
More informationSkid Steer Loader CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm
More informationSKID STEER LOADER CK20-1 / CK30-1 20-1 30-1
CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @
More informationHYDRAULIC EXCAVATOR. ZAXIS-2 series
ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable
More informationSPACIOUS CABIN TEMPERATURE TELESCOPIC
THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM
Cat Electronic Technician 2015C v1.0 Product Status Report 2/20/2016 4:34 PM Product Status Report Parameter Product ID Equipment ID Comments Value JGB00714 NOT PROGRAMMED Machine Control 345D (JGB00714)
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationCat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM
Cat Electronic Technician 2015A v1.0 Product Status Report 6/3/2015 4:41 PM Product Status Report Parameter Product ID Equipment ID Comments Value DHK00407 Machine Control 320D/323D (DHK00407) Parameter
More informationVolvo articulated haulers SPECIAL APPLICATION SOLUTIONS
Volvo articulated haulers SPECIAL APPLICATION SOLUTIONS Attach and go. Handle your workload with Volvo s hauler chassis designed for ultimate performance, flexibility and versatility. This machine is the
More informationFTheBetterMachine. Technical Description R 992. Hydraulic Excavator
Technical Description R 992 litronic` Hydraulic Excavator Operating weight with backhoe attachment 138,8 143,0 t Operating weight with shovel attachment 141,2 146,3t Engine output 575 kw/782 HP Bucket
More informationVOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910
More informationM320F. Wheeled Excavator
M320F Wheeled Excavator Engine Bucket Specifications Engine Model Cat C7.1 ACERT Bucket Capacities 0.35 m 3-1.18 m 3 Emissions EU Stage IV Working Ranges Net Power (Maximum) Maximum Reach at Ground Level
More informationR 994 B. Technical Description Hydraulic Excavator
Technical Description ydraulic Excavator R 994 B litronic` Operating weight with backhoe attachment 296,00 t/652,570 lb Operating weight with shovel attachment 300,50 t/662,490 lb Engine output 1500 P
More informationSKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V
SKID STEER LOADERS VERTICAL-LIFT 2700V NXT2 3300V NXT2 4000V IN THE BEGINNING What began in the 19th century as an agricultural implement manufacturer has grown into a 21st century compact equipment powerhouse
More informationCat Electronic Technician 2015A v1.0 Product Status Report 4/20/2016 2:49 PM
Page 1 of 19 Cat Electronic Technician 2015A v1.0 Product Status Report 2:49 PM Product Status Report Parameter Value Product ID WRK00337 Equipment ID WRK00337 Comments A01-52 C9 330D (THX37891) Parameter
More informationEXCAVATOR SAFETY TRAINING
EXCAVATOR SAFETY TRAINING INSPECTION CHECKLIST INSPECTION AREA INSPECTION RESULTS Sat. Unsat. N/A Comments Carrier & Car Body Rotation system Tracks Rollers Frame, welds, bolts Drive system Upper Structure
More information4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty
4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The
More informationS KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
More information36.2 kw (48.5 HP) at 2200 rpm 6250-6370 kg 3815-4115 mm DX62R-3 / DX63-3. Compact Excavator
36.2 kw (48.5 HP) at 2200 rpm 6250-6370 kg 3815-4115 mm DX62R-3 / DX63-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX62R-3 ideal
More information11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire
R Pneumatic Diesel Forklift Trucks D110/130/160S-5 11,000kg to 16,000kg Capacity D110 / 130 / 160S-5 11,000 kg, 13,000 kg, 16,000 kg Diesel, Pneumatic Tire Printed in Repubic of Korea PSC2604D0(Feb.2007)
More information221E. w/45% transfer on front axles Front axle Differential ratio 3.66 Planetary ratio 6.00 Final axle ratio 22.00
221E ARTICULATED WHEEL LOADER TIER III CERTIFIED I SERIES 3 ENGINE Model Case 432T/M3 Type 4-stroke Cylinders 4 Bore/Stroke 3.89 in x 4.09 in (99 X 104 mm) Displacement 195 in 5 (3.2 L) Fuel injection
More informationEC210 VOLVO EXCAVATOR LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM
VOLVO EXCAVATOR EC210 LONG CRAWLER / NARROW LONG CRAWLER MONOBLOC / 2-PIECE BOOM Engine power, gross: 119 kw (160 hp) Operating weight: _ LC : 20.5 ~ 21.9 t _ NLC : 20.4 ~ 21.2 t Buckets (SAE): 950 ~ 1250
More informationCat. Buckets. 311 390 Hydraulic Excavators. Features: Designed as an Integral Part of the Cat System. Made to Last. Next Generation.
Cat Buckets 311 390 Hydraulic Excavators Features: Designed as an Integral Part of the Cat System As Cat Excavators continue to set industry standards in general, quarry and heavy construction applications,
More information320D/ 320D L Hydraulic Excavator
320D/ 320D L Hydraulic Excavator Engine Engine Model Cat 3066TA Net Flywheel Power 103 kw 138 hp Weights Operating Weight 20 300 kg 44,700 lb Std. Undercarriage Operating Weight 21 00 kg 47,400 lb Long
More information336D/ 336D L Hydraulic Excavator
336D/ 336D L Hydraulic Excavator Engine Engine Model Net Flywheel Power Weights Operating Weight Std. Undercarriage Operating Weight Long Undercarriage Cat C9 with ACERT Technology 200 kw 33 750 kg 35
More informationHEAVY-DUTY, REDEFINED. REDEFINED.
HEAVY-DUTY, REDEFINED. TO GET YOUR TOUGHEST JOBS DONE, you need an engine that works even harder than you do. That s why Caterpillar offers the CT13 engine for our vocational trucks. It delivers every
More informationMinimum Swing Radius Excavators
Minimum Swing Radius Excavators Get In and Out of the Tightest Job Sites All Link-Belt excavators are heavy-duty, strong and stand up to your customers toughest applications. LBX Company s Spin-Ace excavators
More informationJCB TELESCOPIC WHEELED LOADERS TM180 AND TM220
JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated
More informationC18 ACERT Fire Pump Tier 3 448 bkw/600 bhp @ 1750 rpm
CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore...145.0 mm (5.71 in) Stroke...183.0 mm (7.2 in) Displacement... 18.1 L (1,104.53 in3) Aspiration...Turbocharged Aftercooled Compression
More informationZAXIS series HYDRAULIC EXCAVATOR
ZAXIS series HYDRAULIC EXCAVATOR Model Code: ZX30 / ZX35 / ZX40 / ZX50 Engine Rated Power: 19.9 kw (26.7 HP) / 19.9 kw (26.7 HP) / 26.5 kw (35.5HP) / 26.5 kw (35.5HP) Operating Weight: 2 880-3 030 kg /
More informationVOLVO EXCAVATORS ECR58D. 5.7-7.0 t 50 hp
VOLVO EXCAVATORS ECR58D 5.7-7.0 t 50 hp Powered to perform. Enhanced hydraulics Volvo s state-of-the-art hydraulic system is perfectly matched to the Volvo engine and components delivering high performance
More informationKUBOTA DIESEL ZERO-TURN MOWER ZD21/ZD28. Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency.
R KUBOTA DIESEL ZERO-TURN MOWER ZD ZD21/ZD28 Turf Care Professionals can now enjoy the ultimate in zero-turn efficiency. For you, cutting the grass is simply not a weekend chore. It s your business. The
More informationEC210 VOLVO EXCAVATOR. Engine power, gross: 119 kw 160 hp Operating weight: 20.5~21.3t 45200 ~ 47050 lb Buckets (SAE): 800 ~ 1600 l 1.05 ~ 2.
VOLVO EXCAVATOR EC210 Engine power, gross: 119 kw 160 hp Operating weight: 20.5~21.3t 45200 ~ 47050 lb Buckets (SAE): 800 ~ 1600 l 1.05 ~ 2.09 yd 3 Low-emission, turbocharged Cummins diesel engine with
More informationPC 80MR. Midi-Excavator PC80MR-3. ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³
PC 80MR Midi-Excavator PC80MR-3 ENGINE POWER 47,4 kw / 63,6 HP @ 2.200 rpm OPERATING WEIGHT 7.350-8.000 kg BUCKET CAPACITY 0,09-0,27 m³ Walk-Around The new PC80MR-3 compact midi-excavator is the result
More informationBuilt to carry an entire industry.
Refuse Built to carry an entire industry. Refuse is a tough business. That s why Mack trucks are built to overcome the punishing conditions that residential, commercial and municipal refuse applications
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationHYDRAULIC EXCAVATOR PC350-8 PC350LC-8
STANDARD EQUIPMENT Alternator, 0 Ampere, V Auto-decel Automatic engine warm-up system Batteries, 1 Ah/ x 1V Boom holding valve ROPS cab (ISO 111-) Corrosion resistor Counterweight Dry type air cleaner,
More information1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.
Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in
More informationHR46 HARVESTER. Thinning Specialist
HR46 HARVESTER Thinning Specialist The history of Sampo Rosenlew forest machines Sampo Rosenlew today The founder of Sampo Rosenlew, mr Timo Prihti was born and raised on a farm. In Finland this means
More information226D/232D/236D/ 242D/246D/262D
226D/232D/236D/ 242D/246D/262D Skid Steer Loaders Engine 226D 232D 236D 242D 246D 262D Gross Power (SAE J1995) 50.1 kw 67.1 hp 50.1 kw 67.1 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3
More information3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
More informationT-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA. www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842
T-SERIES BACKHOE LOADER 570T THE DAWN OF A NEW ERA www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 1 T-SERIES BACKHOE LOADER The family gets wider: The 570T makes available all the well known CASE
More informationKubota Tractor B50 Cab
Tractor B50 Cab Engine B2650HSDC 2520R 25 B3350HSDC 3320 3040 Engine gross power HP 26 24.2 27 33 32.8 40 36.2 PTO power HP 19.5 18.0 19.9 27 25 32 29.0 No. of cylinders 3 3 3 4 3 4 3 Mahindra 3616 Engine
More information239D/249D/259D/ 279D/289D
239D/249D/259D/ 279D/289D Compact Track Loaders Engine 239D 249D 259D 279D 289D Gross Power (SAE J1995) 50.1 kw 67.1 hp 50.1 kw 67.1 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp 55.4 kw 74.3 hp Weights Operating
More informationVOLVO EXCAVATORS EC380D, EC480D. 37.8-53.1 t 292-360 hp
VOLVO EXCAVATORS EC380D, EC480D 37.8-53.1 t 292-360 hp A passion for performance. At Volvo Construction Equipment, we re not just coming along for the ride. Developing products and services that raise
More informationPneumatic Forklift Trucks D15G / D18G G15G / G18G. 1,500kg to 1,750kg Capacity
Pneumatic Forklift Trucks D15G / D18G G15G / G18G 1,500kg to 1,750kg Capacity Improve your Material Handling Performance with DOOSAN Forklifts! High Performance, Great Productivity, Energy Efficient, Superior
More informationCat 953D Welding Tractor. Engine Engine Model Cat C6.6 ACERT Flywheel Power 110 kw 148 hp Weight Operating Weight 16 300 kg 35,935 lb
Cat 953D Welding Tractor Engine Engine Model Cat C6.6 ACERT Flywheel Power 110 kw 148 hp Weight Operating Weight 16 300 kg 35,935 lb Value for Your Investment This machine will exceed your expectations
More informationVOLVO EXCAVATORS ECR58D, ECR88D. 5.7-9.5 t (12,550-20,950 lbs) 49-58 hp
VOLVO EXCAVATORS ECR58D, ECR88D 5.7-9.5 t (12,550-20,950 lbs) 49-58 hp A passion for performance. At Volvo Construction Equipment, we re not just coming along for the ride. Developing products and services
More informationCat Electronic Technician 2015C v1.0 Product Status Report 2/16/2016 9:19 AM
Cat Electronic Technician 2015C v1.0 Product Report 2/16/2016 9:19 AM Product Report Product ID Comments Unavailable H2A00626 3054 M313C (CRX13565) H2A00626 Engine Serial Number CRX13565 ECM Serial Number
More informationCat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series
Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits
More informationC20/25/30. IC-PNEUMATIC LPG/DIESEL 4000 / 5000 / 6000 lbs. (2000 / 2500 / 3000 kg)
CQ C20/25/30 IC-PNEUMATIC LPG/DIESEL 4000 / 5000 / 6000 lbs. (2000 / 2500 / 3000 kg) With four turns lock-to-lock the hydrostatic power steering provides the operator with excellent maneuverability and
More informationRT 780. RT 780 80 USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
USt Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ ft working radius Maximum boom length: 126 ft Maximum tip height: 1 ft CONTENTS Page: Key...3 Dimensions Crane
More information26 3213.13 Diesel Engine Driven Generators Page 1 of 6
Last Update: December 8, 2014 A. Description of System Consultant s Handbook Page 1 of 6 1. Provide a diesel engine driven electric generating unit, factory assembled, tested and certified to operate at
More informationHow To Drive A Semi-U Blade
Technical Description PR 751 Mining Dozer Engine Output 295 kw/401 HP Operating Weight 39.1 45.0 t/86,300 99,300 lb Hydrostatic Travel Drive The Better Machine. Diesel Engine Cummins-Diesel Engine KT 19-C
More informationx60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3)
x60.20 (T3) x60.30 (T3) x60.40 (T3) x60.50 (T3) ENGINE perkins TIER 3 1104D-44TA 1104D-44TA 1104D-44TA 1104D-44TA ELECTRONIC INJECTION MAX. ENGINE POWER (ISO RATING) HP/KW 92,5 / 68 102 / 75 110 / 81 112
More informationM322D MH. Wheel Material Handler
M322D MH Wheel Material Handler Engine Weights Engine Model Cat C6.6 with Operating Weight 23 500 to 25 700 kg ACERT Technology Working Ranges Net Power (ISO 9249) 123 kw (167 hp) Maximum Reach (stick
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More information160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)
160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all
More informationSPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
More informationINDUSTRIAL ENGINE RATINGS GUIDE
INDUSTRIAL ENGINE RATINGS GUIDE Table of Contents Highly Regulated/Lesser Regulated For purposes of this Guide, Highly Regulated refers to engines that meet stringent emission standards in effect in the
More informationCX C-SERIES HYDRAULIC EXCAVATORS CX250C I CX250C LONG REACH
CX C-SERIES HYDRAULIC EXCAVATORS CX250C I CX250C LONG REACH CXC HYDRAULIC EXCAVATORS CX250C I CX250C LONG REACH Clean power Case C Series excavators use clean and effi cient Tier 4 interim diesel engines.
More information17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks
17,500-33,000 lb Capacity Diesel Pneumatic Tire Lift Trucks Relentless Performance Make short work of big jobs with durable, heavy-duty Cat lift trucks. Built to last, they feature a rugged 131-horsepower
More informationNET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR580JG-1 MOBILE CRUSHER BR580JG-1
NET HORSEPOWER 257 kw 345 HP @ 1.900 rpm OPERATING WEIGHT 49.000-51.000 kg TREATMENT CAPACITY 140-460 ton/h BR 580 MOBILE CRUSHER M OBILE CRUSHER WALK-AROUND The newly designed Komatsu mobile crusher looks
More informationPVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
More informationIn today s fast moving world, there is a. low cost and on time, to satisfy the needs. Simple to Use, Easy to Maintain and
Range Overview 1.3-2.0t Three Wheel Electric Forklift Trucks www.utilev.com Utility you can trust TM In today s fast moving world, there is a constant drive to have goods transported from one location
More informationMANTSINEN. HybriLift. More load, less energy.
7 HybriLift More load, less energy. 7 HybriLift Lift your efficiency to the next level with hydraulic speed and precision. Aliağa, Turkey HybriLift Increases Energy Efficiency by up to 5% Nakhodka, Russia
More informationMINING & OFF-HIGHWAY TRUCKS
MINING & OFF-HIGHWAY TRUCKS PART A Caterpillar Performance Handbook Edition 44 800.437.4228 www.hawthornecat.com 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective
More informationCX (T3), great performance for unlimited versatility
CX90-100-110 (T3) The CX range is equipped with the new TIER-3 compliant Perkins 1104D series turbo engines. With powers of up to 102 hp, the new engines provide exceptional power and torque levels. The
More informationElectric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60
Electric Forklift Trucks Capacity 5000 and 6000 lbs. RX60-25C and RX60-30C SERIES RX60 Safety To adapt to different operating conditions and customer requirements, all performance parameters are adjustable.
More information