Covers & Frames. Ductile Iron. Manhole Covers. Frames. Specification SANS : Value, Performance & Quality PROUDLY SUPPLIED BY

Size: px
Start display at page:

Download "Covers & Frames. Ductile Iron. Manhole Covers. Frames. Specification SANS : Value, Performance & Quality PROUDLY SUPPLIED BY"

Transcription

1 Covers & Frames Ductile Iron Manhole Covers & Frames Specification SANS : 1994 Value, Performance & Quality Incledon (Pty) Ltd trading as DPI Trading Trusted & Reliable Quality Fluid Conveyance Products PROUDLY SUPPLIED BY (PTY) LTD Trusted & Reliable Quality Fluid Conveyance Products Incorporating Incorporating

2 Mechanical Properties A) THE DIFFERENCE BETWEEN DUCTILE AND GREY CAST IRON CAST IRON Ø Ductile Iron has a higher breakage safety coefficient, since it follows any deformation due to loads without breaking (unlike cast iron), the returning to the original condition after stress. Ø Cast Iron is made up of thousands of plates which interrupt the continuity of the metal matrix and consequently jeopardise its mechanical resistance and make it subject to possible cracking or braking. Ø Ductile Iron is made up of spheroids achieved by introducing a suitable quantity of magnesium into the bath before the casting. This gives the product a high breading load as well as remarkable elasticity B) THE BENEFITS OF Ø Ø Elasticity 270 Mpa Tensile Strength 420 Mpa Ø High Elongation > 10% Ductile Iron The Ductile Iron high strength to weight ratio allows for the production of light weight castings that offer what can amount to a 50% weight saving over traditional cast iron to achieve improved strength Description Materials covered Loading Class SANS 558 (Grey Iron) Cast Iron surface boxes and manhole inspection covers and frames Grey Cast Iron only HD = Heavy duty 135 Kn MD = Medium duty 40 Kn LD = Light duty 7 Kn SABS MARKS SABS 558 & SABS EN 124 comparison SANS (Ductile Iron) Gully tops and manhole tops for vehicular and pedestrian areas- Designed requirements, type testing, marking, quality control Spheriodal Graphic cast iron (Ductile Iron), Flake Graphite cast iron (Grey Iron): Cast Steel or any other material that meet the relevant requirements A 15 = 15Kn B125 = 125Kn C250 = 250Kn D400 = 400Kn E600 = 600Kn F900 = 900Kn Loading Class Table ( SANS 50124) Pedestrian Cyclist Sidewalks Walk Ways Car Parks Roadways Parking 1

3 747,2mm TYPE 2A SNAP LOCK COVER & FRAME CLASS D Kn 2A D Kn Type 2A Ductile Iron Snap Lock Cover & Frame M60 D400 SABS EN124 ø649mm 100mm ø610mm ø612mm0 A-A 2

4 TYPE 2A & 2B ROTATING WEDGE LOCK COVER & FRAME CLASS D Kn 2A D Kn Type 2A Ductile Iron Rotating Wegde Lock Cover & Frame 2B D Kn Type 2B Ductile Iron Rotating Wegde Lock Cover & Frame LOCK OPEN SG EN124-SABS-D400 2A EN124-SABS-D400 GJ PATENT 2002/8321 LOCK OPEN SG EN124-SABS-D400 2A EN124-SABS-D400 GJ PATENT 2002/8321 Stopper for Lift Location 624mm dia Cover 550mm dia Daylight opening 115mm 646mm dia Section showing Cover in Frame 4 Lugs on cover underside rotate anti-clockwise to engage with wedge and lock. To lift Cover out of frame, Cover is rotated clockwise to stopper at cut out. Lug then lifts out through cut out. Section showing Locking Wedge 3 The Cover and Frame become an integral unit when locked. Ensures no rocking or dislodging, as well as water tight.

5 TYPE 3A COVER & FRAME & TYPE 3B COVER & FRAME CLASS B Kn 3A B Kn Type 3A Ductile Iron Cover & Frame 3B B Kn Type 3B Ductile Iron Cover & Frame 121mm Covers 230mm Type 3B 305mm Type 3A Staple Staple Chain Conical Frame c 230mm 310mm TYPE 5 COVER & FRAME CLASS B Kn B Kn Type 5 Ductile Iron Cover & Frame Frame Cover EN124-B x 325mm + 1/-0 Cover Frame Chain fixed to Cover and Frame 152mm 380 x 305mm daylight opening 533 x 458mm 4

6 25Kg DOMESTIC COVER & FRAME CLASS A15-15Kn 25Kg A15 15Kn 25kg Domestic Ductile Iron Cover & Frame En124 A15 SABS M60.45 G J DOMESTIC SG IRON 600 X 450mm a COVER 647mm 30mm e d 2/ Chains C-Daylight Opening FRAME Type 9A COVER & FRAME CLASS B Kn 9A B Kn Type 9A Ductile Iron Cover & Frame M 60 x 60 GJ En124 B125 56mm e d b 686mm COVER FRAME 2/ Chains C-Daylight Opening 600mm 5

7 Type 9D COVER & FRAME CLASS B Kn 9D B Kn Type 9D Ductile Iron Cover & Frame GJ M60 x 45 EN124 B mm SG a COVER 686mm 686mm 56mm e d FRAME C-Daylight Opening 2/ Chains Type 8 HINGED GRATE & FRAME CLASS C Kn C Kn Table 8 Ductile Iron Hinged Grate & Frame 641mm Frame Grate 597mm Frame 506mm 6 EN mm Grate C250

8 DISCLAIMER Whilst every care was taken in compiling this data, information and related material contained herein are subject to change without notification. All detail that this document contains are provided in good faith and therefore no representation or warranty whatsoever regarding the completeness, accuracy, up to date, or adequacy of, suitability, functionality, ommission, or operation is specifically disclaimed of any liability for direct, indirect or consequential loss or damage, however so arising, from the use or reliance on information herein thereafter provided. INCLEDON BLOEMFONTEIN Tel: GERMISTON Tel: KATHU Tel: LEPHALALE Tel: NELSPRUIT Tel: RUSTENBURG Tel: SECUNDA Tel: UPINGTON Tel: DURBAN Tel: BURGERSFORT Tel: DPI TRADING (Western Cape) CAPE TOWN Tel: GEORGE Tel: EAST LONDON Tel: PORT ELIZABETH Tel:

Polymer Concrete. Manhole. Covers & Frames. Specification SANS 1882:2003 TECHNICAL CATALOGUE. Your solution to manhole cover theft SANS 1882:2003

Polymer Concrete. Manhole. Covers & Frames. Specification SANS 1882:2003 TECHNICAL CATALOGUE. Your solution to manhole cover theft SANS 1882:2003 SNS 1882:2003 TENIL TLOUE Polymer oncrete Manhole overs & Frames Specification SNS 1882:2003 PI Trading Your solution to manhole cover theft PROULY ISTRIUTE Y www.dpitrading.co.za www.incledon.co.za SNS

More information

Security and durability for the infrastructure of tomorrow The new ACO manhole top matrix Class D 400 according to DIN EN 124.

Security and durability for the infrastructure of tomorrow The new ACO manhole top matrix Class D 400 according to DIN EN 124. : ACO CityTop ACO ClassicTop ACO MultiTop Security and durability for the infrastructure of tomorrow The new ACO manhole top matrix Class D 400 according to DIN EN 124 The new ACO manhole top program with

More information

RE-3 : SOLID TOP RANGE RANGE TOP ONLY

RE-3 : SOLID TOP RANGE RANGE TOP ONLY VULCAN ELECTRIC SOlid top oven range MODEL: RE-3 - SOLID TOP oven Range RE-3T - SOLID range top only ON CABINET BASE RE-3 : SOLID TOP RANGE Model Re-3T : Solid TOP RANGE TOP ONLY Index: General Data 2

More information

PRODUCT GUIDE. Designed and manufactured using patented. ThruBeam

PRODUCT GUIDE. Designed and manufactured using patented. ThruBeam PRODUCT GUIDE Designed and manufactured using patented ThruBeam T E C H N O L O G Y Introduction to MwayPro Composite Covers The inherent properties of composite materials are ideal for the manhole environment.

More information

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01

RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01 SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426

More information

Mounting instructions for SOT78 (TO-220AB); SOT186A (TO-220F)

Mounting instructions for SOT78 (TO-220AB); SOT186A (TO-220F) Mounting instructions for SOT78 (TO-220AB); SOT186A (TO-220F) Rev. 1 29 May 2012 Application note Document information Info Keywords Abstract Content SOT78; SOT186A; TO-220AB; TO-220F This application

More information

Connection Solutions

Connection Solutions Connection Solutions DESIGN BUILD SYSTEM Connection Solutions for Cold formed Steel Construction Complies with; AS/NZS 4600:2005 AISI S100:2007 AS/NZ 1397 ASTM A653 DESIGN & BUILD SYSTEM FRAMECAD Construction

More information

North American Stainless

North American Stainless Introduction: North American Stainless Flat Products Stainless Steel Grade Sheet 309S (S30908)/ EN1.4833 SS309 is a highly alloyed austenitic stainless steel used for its excellent oxidation resistance,

More information

Built for eternity. ACO Cast and ductile iron products to suit all applications, loadings and sizes medium and heavy duty

Built for eternity. ACO Cast and ductile iron products to suit all applications, loadings and sizes medium and heavy duty Built for eternity ACO Cast and ductile iron products to suit all applications, loadings and sizes medium and heavy duty ACO is one of the world leaders in the design and manufacture of grey cast iron

More information

B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN

B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN No. of Printed Pages : 7 BAS-01.0 B.TECH. (AEROSPACE ENGINEERING) PROGRAMME (BTAE) CV CA CV C:) O Term-End Examination December, 2011 BAS-010 : MACHINE DESIGN Time : 3 hours Maximum Marks : 70 Note : (1)

More information

CONTENTS. Page KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS

CONTENTS. Page KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS CONTENTS KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS STADIUM SEATING / ETHEKWINI & TELKOM SPEC PRODUCTS PRECAST PANELS DURBAN BEACHFRONT

More information

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION

Construction. Sikadur-Combiflex. Sealing system for cracks and problem joints with large movements DESCRIPTION Sikadur-Combiflex REVISED JULY 2002 Sealing system for cracks and problem joints with large movements Construction DESCRIPTION USES ADVANTAGES The Sikadur-Combiflex joint sealing system consists of two

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation

More information

Sheet metal operations - Bending and related processes

Sheet metal operations - Bending and related processes Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending

More information

MATERIAL SPECIFICATIONS CATALOGUE

MATERIAL SPECIFICATIONS CATALOGUE MATERIAL SPECIFICATIONS CATALOGUE Manganese Steel High Chrome White Iron Alloy Steel Carbon Steel Stainless Steel SG Iron Cast Iron E X C E L L E N C E T H R O U G H E X P E R I E N C E Foundries has the

More information

EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES OUTCOME 2 ENGINEERING COMPONENTS TUTORIAL 1 STRUCTURAL MEMBERS

EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES OUTCOME 2 ENGINEERING COMPONENTS TUTORIAL 1 STRUCTURAL MEMBERS ENGINEERING COMPONENTS EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES OUTCOME ENGINEERING COMPONENTS TUTORIAL 1 STRUCTURAL MEMBERS Structural members: struts and ties; direct stress and strain,

More information

Description of mechanical properties

Description of mechanical properties ArcelorMittal Europe Flat Products Description of mechanical properties Introduction Mechanical properties are governed by the basic concepts of elasticity, plasticity and toughness. Elasticity is the

More information

DISCRETE SEMICONDUCTORS DATA SHEET. dbook, halfpage M3D088. BB201 Low-voltage variable capacitance double diode. Product specification 2001 Oct 12

DISCRETE SEMICONDUCTORS DATA SHEET. dbook, halfpage M3D088. BB201 Low-voltage variable capacitance double diode. Product specification 2001 Oct 12 DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D088 Low-voltage variable capacitance double 2001 Oct 12 Low-voltage variable capacitance double FEATURES Excellent linearity C1: 95 pf; C7.5: 27.6

More information

COEFFICIENT OF THERMAL EXPANSION FOR VARIOUS MATERIALS AT DIFFERENT TEMPERATURES

COEFFICIENT OF THERMAL EXPANSION FOR VARIOUS MATERIALS AT DIFFERENT TEMPERATURES COEFFICIENT OF THERMAL EXPANSION FOR VARIOUS MATERIALS AT DIFFERENT TEMPERATURES Technical Report TR-18 (Rev. F) 19650 Pauling Foothill Ranch, CA 92610-2610 Tel (949) 460-2100 Fax (949) 460-2300 Email:

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon

More information

ACO Water Management: Civils + Infrastructure

ACO Water Management: Civils + Infrastructure ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD channel drainage system Technical Data ACO MultiDrain MD Introduction to the

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

North American Stainless

North American Stainless North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.

More information

ACO Construction & Building Products

ACO Construction & Building Products AO onstruction & Building Products ommercial Trench Drains AO DRAIN Overview Leaflet A Summary of the AO Drain Product Line The AO Group Founded in 1946, the AO Group manufactures products for the building

More information

Grade Level Spill Containment Manholes

Grade Level Spill Containment Manholes Grade Level Spill Containment Manholes Installation Instructions 705-5 Gallon 715-15 Gallon 725-25 Gallon Manual # Revision Date Changes from Previous Revision F-1307 7 Mar. 2012 Removed reference to pipe

More information

CORRELATION BETWEEN HARDNESS AND TENSILE PROPERTIES IN ULTRA-HIGH STRENGTH DUAL PHASE STEELS SHORT COMMUNICATION

CORRELATION BETWEEN HARDNESS AND TENSILE PROPERTIES IN ULTRA-HIGH STRENGTH DUAL PHASE STEELS SHORT COMMUNICATION 155 CORRELATION BETWEEN HARDNESS AND TENSILE PROPERTIES IN ULTRA-HIGH STRENGTH DUAL PHASE STEELS SHORT COMMUNICATION Martin Gaško 1,*, Gejza Rosenberg 1 1 Institute of materials research, Slovak Academy

More information

ElastoFlake & ElastoTec

ElastoFlake & ElastoTec ElastoFlake & ElastoTec Relining Group 02 Revolutionally injection casting ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed

More information

TOPLIGHTS. NOTE: 2.4m high sliding doors are only available in certain configurations and sizes.

TOPLIGHTS. NOTE: 2.4m high sliding doors are only available in certain configurations and sizes. NOTE: 2.4m high sliding doors are only available in certain configurations and sizes. Eagle Sidelights & Toplights Sidelights and Toplights are designed to clip onto the Eagle patio door system. The Sidelights

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

Solution for Homework #1

Solution for Homework #1 Solution for Homework #1 Chapter 2: Multiple Choice Questions (2.5, 2.6, 2.8, 2.11) 2.5 Which of the following bond types are classified as primary bonds (more than one)? (a) covalent bonding, (b) hydrogen

More information

General Trading Companies

General Trading Companies Last upated: July 13, 2011 Rating Methodology by Sector General Trading Companies General trading companies operate in a broad array of industries, including metals, energy, machinery, food, chemicals,

More information

Chapter 18: Brakes and Clutches

Chapter 18: Brakes and Clutches Chapter 18: Brakes and Clutches Nothing has such power to broaden the mind as the ability to investigate systematically and truly all that comes under thy observation in life. Marcus Aurelius, Roman Emperor

More information

LANDSCAPING AQUA SPORT. Rainwater treatment using filter substrate channel. DIBt approval applied for

LANDSCAPING AQUA SPORT. Rainwater treatment using filter substrate channel. DIBt approval applied for CIVILS LANDSCAPING AQUA SPORT Drainfix Clean Rainwater treatment using filter substrate channel DIBt approval applied for CIVILS LANDSCAPING AQUA SPORT Drainfix Clean Application areas For the treatment

More information

中 华 人 民 共 和 国 化 工 行 业 标 准

中 华 人 民 共 和 国 化 工 行 业 标 准 HG/T 21562 1994 HG PROFESSIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中 华 人 民 共 和 国 化 工 行 业 标 准 HG/T 21562-1994 Lining PTFE steel pipes and fittings 衬 聚 四 氟 乙 烯 钢 管 和 管 件 Issued on December 29, 1994

More information

Lightweight, Heavy Duty

Lightweight, Heavy Duty Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.

More information

DESIGN OF PRESTRESSED BARRIER CABLE SYSTEMS

DESIGN OF PRESTRESSED BARRIER CABLE SYSTEMS 8601 North Black Canyon Highway Suite 103 Phoenix, AZ 8501 For Professionals Engaged in Post-Tensioning Design Issue 14 December 004 DESIGN OF PRESTRESSED BARRIER CABLE SYSTEMS by James D. Rogers 1 1.0

More information

M Series Manual Handwheel Gear Actuators for Fisher Butterfly Valves

M Series Manual Handwheel Gear Actuators for Fisher Butterfly Valves M Series Actuators D500239X0 Product Bulletin M Series Manual Handwheel Gear Actuators for Fisher Butterfly Valves M Series handwheel gear actuators are totally enclosed, weatherproof, worm gear actuators

More information

Why HARDOX in tipping trailers?

Why HARDOX in tipping trailers? Why HARDOX in tipping trailers? 1. Higher elastic limit and higher ultimate stress 2. Longer life span (higher resistance to deformation, abrasion and scratching) 3. Excellent resistance to impact 4. Less

More information

DRAINAGE SYSTEMS FOR BEVERAGE INDUSTRIES

DRAINAGE SYSTEMS FOR BEVERAGE INDUSTRIES DRAINAGE SYSTEMS FOR BEVERAGE INDUSTRIES K E E P I N G U P T H E F L O W S T A I N L E S S S T E E L D R A I N A G E S Y S T E M S BREWERIES & DAIRIES BLÜCHER provides drainage solutions for removing

More information

Fabricated Drainage Products

Fabricated Drainage Products Fabricated Drainage Products Complete Drainage System Inline Drains are used At the beginning of a drain line Add a new water inlet to an existing drain line using a riser pipe and tee HARCO Surface Drainage

More information

ITS specification Jointing chambers and pull pits (ITS-02-02)

ITS specification Jointing chambers and pull pits (ITS-02-02) ITS specification Jointing chambers and pull pits (ITS-02-02) NZ Transport Agency Effective from September 2011 Copyright information This publication is copyright NZ Transport Agency (NZTA). Material

More information

G M G. Terms and Conditions. Business Consulting

G M G. Terms and Conditions. Business Consulting G M G Terms and Conditions Business Consulting Overview Third Party Fair Use of t. + 44 ( 0 ) 1892 739 197 e. contact@ gmgbusiness.com www.gmgbusiness.com GMG Business Consulting is the trading name of

More information

Formula. = base of natural logarithms. = friction factor of the ropes in the grooves. = angle of wrap of the ropes on the traction sheave (radians).

Formula. = base of natural logarithms. = friction factor of the ropes in the grooves. = angle of wrap of the ropes on the traction sheave (radians). Formula It is generally accepted that the maximum available traction is dependent upon three major factors: i) angle of wrap of the ropes around the traction sheave; ii) shape of groove profile; and iii)

More information

ACO Water Management: Civils + Infrastructure

ACO Water Management: Civils + Infrastructure ACO Water Management: Civils + Infrastructure Technical data Introduction to The unit provides an aesthetically pleasing solution when linking proprietary conveyance drainage systems to vegetated infiltration

More information

SOS SERVICES TERMS AND CONDITIONS

SOS SERVICES TERMS AND CONDITIONS SOS SERVICES TERMS AND CONDITIONS Where we refer to the word member in this document, it means you/your/yours as defined in your policy. Our SOS services provided by Europ Assistance are: Road assistance

More information

Foundry Factory Ltd.

Foundry Factory Ltd. Foundry Factory Ltd. Foundry Factory Ltd. Cast-iron castings Ductile iron castings Non-magnetic cast iron castings Wear resistant cast iron castings Conveyor casting from 10 kg Permanent mold casting up

More information

EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQF LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 3 LOADED COMPONENTS

EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQF LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 3 LOADED COMPONENTS EDEXCEL NATIONAL CERTIICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQ LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 3 LOADED COMPONENTS 1. Be able to determine the effects of loading in static engineering

More information

KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET

KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET 1 KALPANA INDUSTRIES LTD. TECHNICAL DATA SHEET KI XL - 03 / KI-SC 10 TWO COMPONENT AMBIENT CURABLE POLYETHYLENE COMPOUND FOR INSULATION OF LOW VOLTAGE POWER CABLE DESCRIPTION : KI polyethylene compound

More information

Ladder Safety App User s Manual (Android OS)

Ladder Safety App User s Manual (Android OS) Ladder Safety App User s Manual (Android OS) National Institute for Occupational Safety and Health (NIOSH) Produced by DSFederal Inc. 4/1/2013 Table of Contents I. Android App Installation 3 II. Home Screen:

More information

Storm Drainage Structures

Storm Drainage Structures Storm Drainage Structures Tomorrow s Drainage System Today A DIVISION OF ADVANCED DRAINAGE SYSTEMS, INC. ADVANCED DRAINAGE SYSTEMS, INC. The Preferred Solution for Storm Drainage Applications. About Nyloplast-ADS

More information

The sensor can be operated at any frequency between DC and 1 MHz.

The sensor can be operated at any frequency between DC and 1 MHz. Rev. 6 18 November 2010 Product data sheet 1. Product profile 1.1 General description The is a sensitive magnetic field sensor, employing the magneto-resistive effect of thin film permalloy. The sensor

More information

Direct Alloys LLC. An Online Premium Metals Clearinghouse 901 Broad Street Utica, NY 13501 315-883-1991 Fax 315-292-1088

Direct Alloys LLC. An Online Premium Metals Clearinghouse 901 Broad Street Utica, NY 13501 315-883-1991 Fax 315-292-1088 Direct Alloys LLC An Online Premium Metals Clearinghouse 901 Broad Street Utica, NY 13501 315-883-1991 Fax 315-292-1088 Welcome to Direct Alloys Direct Alloys is pleased to offer a new concept for the

More information

Job-hunting: Responding by letter

Job-hunting: Responding by letter Job-hunting: Responding by letter You ve got the qualifications and the training. You ve got the personality, you ve got the style, now all you need is. a job! Chances are you ll be looking for some job

More information

Stress Strain Relationships

Stress Strain Relationships Stress Strain Relationships Tensile Testing One basic ingredient in the study of the mechanics of deformable bodies is the resistive properties of materials. These properties relate the stresses to the

More information

North American Stainless

North American Stainless North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,

More information

2014+ Mazda 3/6 Shift Knob Installation Instructions

2014+ Mazda 3/6 Shift Knob Installation Instructions Page1 James Barone Racing Aftermarket Parts and Accessories 2014+ Mazda 3/6 Shift Knob Installation Instructions What you will need: Your hands 15mm deep socket Socket wrench Ok let s get started. 1. Remove

More information

Uniclass L7315 + L2123 EPIC J3413. CI/SfB (52.5) Heavy duty channel drainage system ACO S Range

Uniclass L7315 + L2123 EPIC J3413. CI/SfB (52.5) Heavy duty channel drainage system ACO S Range Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) Heavy duty channel drainage system ACO S Range ACO S Range CHANNEL DRAINS Load Class BS EN 1433:2002 Optimum solution The ACO S Range is an interconnecting

More information

How To Find A Job In South Africa

How To Find A Job In South Africa Where can you look for a job? Do you have to look for a job, but don t know where to start? Here are some ideas! Provincial Offices and Labour Centres of the Department of Labour Phone or visit an employment

More information

Integrated Manhole Ladder System

Integrated Manhole Ladder System Application: This innovative product has been designed to provide safe access and egress to precast concrete manholes and inspection chambers. It can also be used within any other underground concrete

More information

The mechanical properties of metal affected by heat treatment are:

The mechanical properties of metal affected by heat treatment are: Training Objective After watching this video and reviewing the printed material, the student/trainee will learn the basic concepts of the heat treating processes as they pertain to carbon and alloy steels.

More information

Objectives. Experimentally determine the yield strength, tensile strength, and modules of elasticity and ductility of given materials.

Objectives. Experimentally determine the yield strength, tensile strength, and modules of elasticity and ductility of given materials. Lab 3 Tension Test Objectives Concepts Background Experimental Procedure Report Requirements Discussion Objectives Experimentally determine the yield strength, tensile strength, and modules of elasticity

More information

Operating Instructions Parts List Manual Scissor Lift Pallet Truck

Operating Instructions Parts List Manual Scissor Lift Pallet Truck Operating Instructions Parts List Manual Scissor Lift Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Scissor Lift. Thank you for using this hand scissors

More information

VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)

VdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01) VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,

More information

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines

High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines High Density Polyethylene Liners for Rehabilitation of Corroded Pipelines Jeff Schell General Manager United Pipeline Middle East, Inc. Introduction HDPE Liners A cost effective and environmentally beneficial

More information

Concrete Design Manual

Concrete Design Manual The Reinforced Concrete Design Manual In Accordance with ACI 318-11 SP-17(11) Vol 2 ACI SP-17(11) Volume 2 THE REINFORCED CONCRETE DESIGN MANUAL in Accordance with ACI 318-11 Anchoring to concrete Publication:

More information

TENSILE TESTING PRACTICAL

TENSILE TESTING PRACTICAL TENSILE TESTING PRACTICAL MTK 2B- Science Of Materials Ts epo Mputsoe 215024596 Summary Material have different properties all varying form mechanical to chemical properties. Taking special interest in

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

Buy a Czech Medical Carts For Your Healthcare Facility

Buy a Czech Medical Carts For Your Healthcare Facility 360 INSTRUMAN LINE healthcare carts Company profile with traditional quality Klaro spol. s. r. o. (Ltd.) is a leading Czech manufacturer of healthcare and handling carts, including a complete range and

More information

Subminiature Load Cell Model 8417

Subminiature Load Cell Model 8417 w Technical Product Information Subminiature Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential connection...

More information

PALLET JACK - 2.5 TON

PALLET JACK - 2.5 TON PALLET JACK - 2.5 TON 39939 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.

More information

STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS

STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS STANDARD SPECIFICATIONS SECTION 05500 METAL FABRICATIONS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for providing metal fabricated items like castings, gratings, hatchways, ladders,

More information

Module 2- GEARS. Lecture 9 - SPUR GEAR DESIGN

Module 2- GEARS. Lecture 9 - SPUR GEAR DESIGN Module 2- GEARS Lecture 9 - SPUR GEAR DESIGN Contents 9.1 Problem 1 Analysis 9.2 Problem 2 Spur gear 9.1 PROBLEM 1 SPUR GEAR DESIGN In a conveyor system a step-down gear drive is used. The input pinion

More information

Owner s Manual DANDY LIFT. Model # Serial # Placed in Service. Southworth Products Corp

Owner s Manual DANDY LIFT. Model # Serial # Placed in Service. Southworth Products Corp Owner s Manual DANDY LIFT For model numbers UDL-50, UDL-50, UDA-350W, UDA-500 & UDA-800, this manual is for Serial number L-48493 and up, and for machines manufactured in September 0 and newer. For older

More information

Precision Miniature Load Cell. Models 8431, 8432 with Overload Protection

Precision Miniature Load Cell. Models 8431, 8432 with Overload Protection w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force

More information

Series 4000 Fiberglass Pipe and Fittings

Series 4000 Fiberglass Pipe and Fittings Series 4000 Fiberglass Pipe and Fittings for corrosive industrial service Uses and applications Listings Performance Acid drains Chemical process piping Corrosive slurries Food processing Geothermal Nonoxidizing

More information

Kop-Flex Asset Management Program - AMP

Kop-Flex Asset Management Program - AMP Kop-Flex Asset Management Program - AMP AMP The Kop-Flex Asset Managing Program puts the tools in your hands to effectively and efficiently manage large numbers of couplings. Practical Problems Faced

More information

Master Anamorphic Lens 100/T1.9 Lens Flare Set. Date: May 2015

Master Anamorphic Lens 100/T1.9 Lens Flare Set. Date: May 2015 Master Anamorphic Lens 100/T1.9 Lens Flare Set U S E R M A N U A L Date: May 2015 Flare Set User Manual Delivery 1 Case 2 Front Flare Element 3 Rear Flare Element 4 Screws 5 User Manual Intended use The

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

App Terms and Conditions!

App Terms and Conditions! 1. INTRODUCTION App Terms and Conditions Thank you for purchasing the App or Apps herein now referred to collectively or individually as (the App ). The App is published by or on behalf of Complexus (Pty)

More information

Mechanical arms, belts and sheets

Mechanical arms, belts and sheets Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black

More information

FEM analysis of the forming process of automotive suspension springs

FEM analysis of the forming process of automotive suspension springs FEM analysis of the forming process of automotive suspension springs Berti G. and Monti M. University of Padua, DTG, Stradella San Nicola 3, I-36100 Vicenza (Italy) guido.berti@unipd.it, manuel.monti@unipd.it.

More information

ACO Water Management: Civils + Infrastructure

ACO Water Management: Civils + Infrastructure ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD Medium duty channel drainage system ACO MultiDrain MD Introduction to the ACO

More information

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages

More information

Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn

Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Safety.. Operations and Instruction Manual Might Swivel - Part # 310273 Concrete and Steel Anchorage Connector ANSI Z359.1 10,000 lbs / 44kn Description: Technical: Zinc plated forged heat treated steel,

More information

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General

More information

Evaluation Report CCMC 13102-R Pieux Vissés Vistech / Postech Screw Piles

Evaluation Report CCMC 13102-R Pieux Vissés Vistech / Postech Screw Piles Evaluation Report CCMC 13102-R Pieux Vissés Vistech / Postech Screw Piles 1. Opinion 1of 6 MASTERFORMAT: 31 62 16.01 Evaluation issued: 2003-02-13 Re-evaluated: 2015-03-13 Re-evaluation due: 2018-02-13

More information

Green Thread Product Data

Green Thread Product Data Green Thread Product Data Applications Dilute Acids Caustics Produced Water Industrial Waste Hot Water Condensate Return Materials and Construction All pipe manufactured by filament winding process using

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :

More information

Spill Containment. Contents

Spill Containment. Contents Contents IBC Bund, Spill Pallet or Sump Pallets 2-14 IBC Bunds - User Healthy & Safety Instructions 15-16 Spill Trays, Drum Bunds & Drum Pallets 17-25 Tank Bunds 26-28 Standard Sized Bunds 29 Custom Built

More information

Reinforced Concrete Slab Design Using the Empirical Method

Reinforced Concrete Slab Design Using the Empirical Method Reinforced Concrete Slab Design Using the Empirical Method BridgeSight Solutions for the AASHTO LRFD Bridge Design Specifications BridgeSight Software TM Creators of effective and reliable solutions for

More information

www.marshalls.co.uk/watermanagement Channel Drainage Guide

www.marshalls.co.uk/watermanagement Channel Drainage Guide www.marshalls.co.uk/watermanagement Channel Drainage Guide The Case for Linear Drainage The Case for Linear Drainage Linear drainage solutions are the preferred choice amongst specifiers and contractors

More information

Compatibility Matrix. BES12 Cloud. July 20, 2016

Compatibility Matrix. BES12 Cloud. July 20, 2016 Compatibility Matrix BES12 Cloud July 20, 2016 Published: 2016-07-20 SWD-20160719104452880 Contents Introduction... 4 Legend... 4 Browser...5 BlackBerry Connectivity Node... 6 Operating system...6 Microsoft

More information

5 G R A TINGS ENGINEERING DESIGN MANUAL. MBG Metal Bar Grating METAL BAR GRATING MANUAL MBG 534-12 METAL BAR GRATING NAAMM

5 G R A TINGS ENGINEERING DESIGN MANUAL. MBG Metal Bar Grating METAL BAR GRATING MANUAL MBG 534-12 METAL BAR GRATING NAAMM METAL BAR NAAMM GRATNG MANUAL MBG 534-12 5 G R A TNG NAAMM MBG 534-12 November 4, 2012 METAL BAR GRATNG ENGNEERNG DEGN MANUAL NAAMM MBG 534-12 November 4, 2012 5 G R A TNG MBG Metal Bar Grating A Division

More information

be carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque

be carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied

More information

Quest vworkspace Virtual Desktop Extensions for Linux

Quest vworkspace Virtual Desktop Extensions for Linux Quest vworkspace Virtual Desktop Extensions for Linux What s New Version 7.6 2012 Quest Software, Inc. ALL RIGHTS RESERVED. Patents Pending. This guide contains proprietary information protected by copyright.

More information

Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange

Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The

More information

ENGINEERING COUNCIL CERTIFICATE LEVEL

ENGINEERING COUNCIL CERTIFICATE LEVEL ENGINEERING COUNCIL CERTIICATE LEVEL ENGINEERING SCIENCE C103 TUTORIAL - BASIC STUDIES O STRESS AND STRAIN You should judge your progress by completing the self assessment exercises. These may be sent

More information

Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5

Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Cl Sfb (27-9) Rn7 M2 December 2004 Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Fesco, Fesco S, Retrofit, Retrofit S, Fesco Fillet, PF,

More information

Optimum proportions for the design of suspension bridge

Optimum proportions for the design of suspension bridge Journal of Civil Engineering (IEB), 34 (1) (26) 1-14 Optimum proportions for the design of suspension bridge Tanvir Manzur and Alamgir Habib Department of Civil Engineering Bangladesh University of Engineering

More information