IRLJ RULE 6.6 EFFECTIVE 10/31/2000
|
|
|
- Kathlyn Moody
- 7 years ago
- Views:
Transcription
1 th Ave NE, Suite 102 Kirkland, WA T , F IRLJ RULE 6.6 EFFECTIVE 10/31/2000 CERTIFICATION CONCERNING DESIGN AND CONSTRUCTION OF ELECTRONIC SPEED MEASURING DEVICES I, Charles N. Brown do certify under penalty of perjury under the laws of the State of Washington that the following is true and correct: I, Charles N. Brown am employed with Cascade Engineering Services, Inc. (CES) Metrology and Electronic Repair Services, as a Senior Metrology Technician, specialized in Speed Measuring Device (SMD) technology, and assigned as co-custodian of SMD records. I have been employed in such a capacity for 32 years. Part of my duties include supervising others in the maintenance and repair of all electronic Doppler and Laser speed measuring devices (SMD's) utilized by the KITSAP COUNTY SHERIFFS OFFICE. The KITSAP COUNTY SHERIFFS OFFICE uses the SMD(s) listed in the table below. I maintain the following qualifications with respect to SMD(s): Twelve years military experience in electronics, which included the repair and calibration of airborne and ground radar systems. I have over 15 years experience in the repair and calibration of Doppler and Lidar SMD's. I have successfully completed factory training in the repair and service of Laser Speed Detection systems by LTI, Inc. Graduate of Washington Technical Institute. I have successfully completed courses in the repair and calibration of measuring instruments. I am experienced and competent in the principles and fundamental requirements of calibration from DC to Microwave frequencies. CES Metrology Laboratory is audited periodically by American Association for Laboratory Accreditation (A2LA) to ensure and maintain our ISO/IEC 17025:2005 accreditation and certification, (No ), for technical competence. The CES laboratory is an authorized service center for all makes and models of SMD(s) used by the KITSAP COUNTY SHERIFFS OFFICE. Our laboratory maintains manuals specific to these SMD(s), which are available for public inspection upon request. I am personally familiar with those manuals and am personally familiar with the design, construction and operation of each of the SMD(s) listed below. Each of these SMD(s) are so designed and constructed to accurately and reliably employ the Doppler Radar principle or the measurement techniques based on the velocity of light as a constant, as the case may be, in such a manner that each of them will give accurate and reliable measurement of the speed of motor vehicles when used by a trained operator. Each of the SMD's were calibrated and tested under my direction on the Calibration Date(s) indicated in the table below. The unit(s) were serviced to meet or exceed existing performance standards. The CES laboratory tests all Doppler SMD's used by the KITSAP COUNTY SHERIFFS OFFICE at least every two years, as recommended by the manufacturer, as follows: The Vocar HR, handheld Radar certification system, Serial number VHR is used to calibrate Doppler SMD devices. The Vocar HR is calibrated annually by the manufacturer. The Vocar HR is used to simulate speeds at 5 mph increments from 20 mph to 140 mph to verify accuracy in stationary and moving mode. Measurements are taken of the SMD transmit frequency, antenna/receiver sensitivity and any accompanying tuning forks are also tested for accuracy. All other operational functions of the SMD system are then tested for proper performance. The Laser SMD's transmit a series of highly focused light wave pulses each time the trigger is pulled and utilizes two laws of physics; time and distance (I.E. 3.5 feet in diameter at 1000 ft). Since the speed of light is a known value, the distance of the target is determined by calculating how long it takes for the signal to travel to the target and back. This series of measurements allows the SMD to calculate the speed of the target by measuring the distance traveled in time (usually less than a second for a veritable display). The displayed speed is accurate to within plus (+) or minus (-) one (1) mile per hour. The CES laboratory tests all Laser / Lidar SMD(s) used by the KITSAP COUNTY SHERIFFS OFFICE, at least every two years, as recommended by the manufacturer, as follows: The Laser Speed Measurement Simulator (LSMS SN: SS000043) is used to simulate a moving target. This is accomplished by detecting the optical output pulses of the laser device and generating artificial return pulses. Different speed values and ranges are simulated by varying the time delays between the input pulses and the return pulses. The LSMS consists of a Digital Delay Generator (DDG), and an optical interface unit (SN: OH000030). The DDG produces precise time delays. The optical interface unit converts the optical energy of the laser instrument into electrical signals which are supplied to the DDG. The optical interface unit also converts the electrical signals received from the DDG into optical energy which is then transmitted to the Lidar. The Lidars output power is tested using an Ophir Nova Display SN , with a PD300-SH power head, SN Based upon my education, training, experience, and knowledge of the SMD(s) listed below, it is my opinion that each of these electronic pieces of equipment is so designed and constructed as to accurately and reliably employ the Doppler effect in such a manner that it will produce measurements of the speed of motor vehicles when properly calibrated and operated by a trained operator accurate to within plus (+) or minus (-) one (1) mile per hour or, in the case of the Laser/Lidar SMD(s), each of these pieces of equipment is so designed and constructed as to accurately and reliably employ measurement techniques based on the velocity of light in such a manner that it will produce measurements of the speed of motor vehicles when properly calibrated and operated by a trained operator accurate to within plus (+) or minus (-) one (1) mile per hour. March-2010 Page 1 of 5
2 This agency, KITSAP COUNTY SHERIFFS OFFICE currently utilizes the following Laser SMD(s): KUSTOM Manufacturer's the following SMD(s) L-1/PL16552 PRO LASER III L-10/LP02255 PRO LITE + L-11/LP03657 PRO LITE + L-12/LP03660 PRO LITE + L-13/LP03658 PRO LITE + N/A N/A N/A N/A 06/11/ MONTHS L-14/LP03659 PRO LITE + L-16/LP03733 PRO LITE + L-17/LP02461 PRO LITE + L-2/PL17341 PRO LASER III L-3/PL17358 PRO LASER III L-4/PL20421 PRO LASER III L-7/LP01829 PRO LITE + L-8/LP01876 PRO LITE + L-9/LP02712 PRO LITE + N/A N/A N/A N/A 06/05/ MONTHS 06/05/2017 LASER TECHNOLOGY INC Manufacturer's the following SMD(s) L-15/TJ TRUSPEED S L-18/TJ TRUSPEED S N/A N/A N/A N/A 06/05/ MONTHS 06/05/2017 L-19/TJ TRUSPEED S L-5/TJ TRUSPEED S L-6/TJ TRUSPEED S 75/PYT PYTHON PYT PYT /19/ MONTHS 06/19/2015 This agency, KITSAP COUNTY SHERIFFS OFFICE currently utilizes the following Doppler SMD(s): March-2010 Page 2 of 5
3 DECATUR Manufacturer's the following SMD(s) 10/1052 GENESIS VPD HANDHELD N/A /24/ MONTHS 04/24/ /1083 GENESIS VPD HANDHELD N/A /10/ MONTHS 04/10/ /6320 GENESIS VPD HANDHELD N/A /24/ MONTHS 04/24/ /1066 GENESIS VPD HANDHELD N/A /24/ MONTHS 04/24/ /6323 GENESIS VPD HANDHELD N/A /10/ MONTHS 04/10/ /6332 GENESIS VPD HANDHELD N/A /13/ MONTHS 06/13/ /6327 GENESIS VPD HANDHELD N/A /05/ MONTHS 06/05/ /GHD GHD N/A N/A /24/ MONTHS 04/24/ /GHD GHD HANDHELD N/A /24/ MONTHS 04/24/ /GHD GHD HANDHELD N/A /05/ MONTHS 06/05/ /GHD GHD HANDHELD N/A /26/ MONTHS 02/26/ /GHD GHD HANDHELD N/A /05/ MONTHS 06/05/ /1074 GENESIS VPD HANDHELD N/A /10/ MONTHS 04/10/ /GHS-4347 GENESIS HANDHELD N/A N/A 04/10/ MONTHS 04/10/ /GHS-4359 GENESIS HANDHELD N/A N/A 06/05/ MONTHS 06/05/ /GHS-4353 GENESIS HANDHELD N/A N/A 04/10/ MONTHS 04/10/ /GHS-5980 GENESIS N/A N/A N/A 04/10/ MONTHS 04/10/ /1086 GENESIS VPD HANDHELD N/A /24/ MONTHS 04/24/ /GHS-4198 GENESIS HANDHELD N/A N/A 06/05/ MONTHS 06/05/ /GHS-4215 GENESIS HANDHELD N/A N/A 04/10/ MONTHS 04/10/ /GHS-4210 GENESIS HANDHELD N/A N/A 04/10/ MONTHS 04/10/ /1067 GENESIS VPD HANDHELD N/A /05/ MONTHS 06/05/ /1075 GENESIS VPD HANDHELD N/A /19/ MONTHS 06/19/ /1068 GENESIS VPD HANDHELD N/A /24/ MONTHS 04/24/ /1072 GENESIS VPD HANDHELD N/A /10/ MONTHS 04/10/ /1076 GENESIS VPD N/A N/A /24/ MONTHS 04/24/2017 KUSTOM Manufacturer's the following SMD(s) 118/XE13327 GOLDEN EAGLE K K /10/ MONTHS 04/10/ /XE14572 GOLDEN EAGLE K K /31/ MONTHS 07/31/ /XE14594 GOLDEN EAGLE K K /10/ MONTHS 04/10/ /RP02530 RP-1 RK04027 RK /28/ MONTHS 04/28/ /RP02529 RP-1 RK04024 RK /24/ MONTHS 04/24/ /RP02448 RP-1 RK03843 RK /24/ MONTHS 04/24/ /E1712 EAGLE EK10618 EK /24/ MONTHS 04/24/ /E1713 EAGLE EK10612 EK /24/ MONTHS 04/24/ /E1741 EAGLE EK10599 EK /07/ MONTHS 07/07/2017 9/K K-55 PYT PYT /24/ MONTHS 04/24/2017 March-2010 Page 3 of 5
4 1/MI PYTH0N PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /23/ MONTHS 06/23/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /19/ MONTHS 06/19/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /05/ MONTHS 06/05/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON III PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON III PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON III PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON III PYT PYT /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /05/ MONTHS 06/05/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/2017 2/PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /11/ MONTHS 05/11/ /BEE BEE III BEN BEN /05/ MONTHS 06/05/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /10/ MONTHS 04/10/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/2017 3/PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /BEE BEE III BEN BEN /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/2017 4/PYT PYTHON PYT PYT /10/ MONTHS 04/10/2017 5/PYT PYTHON III PYT PYT /24/ MONTHS 04/24/2017 March-2010 Page 4 of 5
5 57/PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/2017 6/PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /11/ MONTHS 05/11/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/2017 7/PYT PYTHON III PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /23/ MONTHS 06/23/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/2017 8/29327 BEE /13/ MONTHS 06/13/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON PYT PYT /05/ MONTHS 06/05/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /PYT PYTHON II PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /24/ MONTHS 04/24/ /HHM SPEED GUN HANDHELD N/A /17/ MONTHS 07/17/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/ /PYT PYTHON PYT PYT /10/ MONTHS 04/10/2017 Certified by: Charles N. Brown Place: Redmond, WA August 3, 2015 Date March-2010 Page 5 of 5
Procedure for Equipment Calibration and Maintenance
Procedure for Equipment Calibration and Maintenance 1.0 Purpose This procedure specifies the schedule and requirements for calibration, performance verification, and maintenance of State Crime Laboratory
QUALITY ASSURANCE FOR MOBILE RETROREFLECTIVITY UNITS
State of Florida Department of Transportation QUALITY ASSURANCE FOR MOBILE RETROREFLECTIVITY UNITS FDOT Office State Materials Office Authors Patrick Upshaw Joshua Sevearance Hyung Lee Date of Publication
Adding Heart to Your Technology
RMCM-01 Heart Rate Receiver Component Product code #: 39025074 KEY FEATURES High Filtering Unit Designed to work well on constant noise fields SMD component: To be installed as a standard component to
ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES
ILLINOIS DEPARTMENT OF CENTRAL MANAGEMENT SERVICES CLASS SPECIFICATION COMMUNICATIONS EQUIPMENT TECHNICIAN SERIES CLASS TITLE POSITION CODE COMMUNICATIONS EQUIPMENT TECHNICIAN I 08831 COMMUNICATIONS EQUIPMENT
Module 13 : Measurements on Fiber Optic Systems
Module 13 : Measurements on Fiber Optic Systems Lecture : Measurements on Fiber Optic Systems Objectives In this lecture you will learn the following Measurements on Fiber Optic Systems Attenuation (Loss)
81110A Pulse Pattern Generator Simulating Distorted Signals for Tolerance Testing
81110A Pulse Pattern Generator Simulating Distorted Signals for Tolerance Testing Application Note Introduction Industry sectors including computer and components, aerospace defense and education all require
EVALUATION AND ACCREDITATION OF SUPPLIER TEST FACILITIES GP 10
EVALUATION AND ACCREDITATION OF SUPPLIER TEST FACILITIES GP 10 EVALUATION AND ACCREDITATION OF TESTING FACILITIES USED BY SUPPLIER OF MATERIALS TO GENERAL MOTORS PREFACE TO GP-10 General Motors expects
American Association for Laboratory Accreditation
Page 1 of 15 R104 GENERAL REQUIREMENTS: ACCREDITATION OF FIELD TESTING AND FIELD CALIBRATION LABORATORIES July 2015 2015 by A2LA All rights reserved. No part of this document may be reproduced in any form
DRS-6/1 Doppler Radar Sensor
DRS-6/1 Doppler Radar Sensor B+S Software und Messtechnik GmbH Lochhamer Schlag 17 D-82166 Graefelfing Germany October 1999 User's Manual DRS-6 SENSOR for speed measurements 1. DRS-6 Functional Description
STANDARD OPERATING GUIDELINES: EVIDENTIAL BREATH ALCOHOL INSTRUMENT CALIBRATION
Directive from the Scientific Director Page 1 of 16 STANDARD OPERATING GUIDELINES: EVIDENTIAL BREATH ALCOHOL INSTRUMENT CALIBRATION 1 Scope To describe the procedure for breath alcohol instrument calibration
Adaptive Cruise Control
IJIRST International Journal for Innovative Research in Science & Technology Volume 3 Issue 01 June 2016 ISSN (online): 2349-6010 Adaptive Cruise Control Prof. D. S. Vidhya Assistant Professor Miss Cecilia
Quality Management System. Manual
Quality Manual ISO 9001 Quality Approved by: JTH Page 1 of 7 Introduction The adoption of a Quality is a strategic decision of an organization. Industrial Scale Ltd. has instituted a formal Quality as
Automatic Wheel Profile Measuring Device for Tramway Vehicles
Automatic Wheel Profile Measuring Device for Tramway Vehicles Technical description The automatic wheel profile measuring device is used to measure the wheel profile and diameter whilst a tramway vehicle
Measuring instruments in industry.
Measuring instruments in industry. Measuring instruments that are present in any branch of industry, are subject to different levels of supervision, like in case of laboratories. Supervision relates to
10-3. SYSTEM TESTING AND DOCUMENTATION
10-3. SYSTEM TESTING AND DOCUMENTATION System testing and documentation must cover pre-installation testing, sub-system testing, fiber optic cable testing, video link testing, data link testing, acceptance
Sample specifications for an effective Flow Monitoring Services RFP
Sample specifications for an effective Flow Monitoring Services RFP Red copy indicates areas requiring specific input Each specification is numbered for quick identification 1. Project Specifications 1.1.
A Laser Scanner Chip Set for Accurate Perception Systems
A Laser Scanner Chip Set for Accurate Perception Systems 313 A Laser Scanner Chip Set for Accurate Perception Systems S. Kurtti, J.-P. Jansson, J. Kostamovaara, University of Oulu Abstract This paper presents
IAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS
REFERENCES NIST Special Publication 330 IAS CALIBRATION and TESTING LABORATORY ACCREDITATION PROGRAMS DEFINITIONS Revised October 2013 International vocabulary of metrology Basic and general concepts and
1 For more information T: +1.847.664.1499 / E: DAP@ul.com / W: ul.com/dap
DATA ACCEPTANCE PROGRAM UL Client Test Data Program Investigations of products by UL typically involve the testing of product samples. While UL maintains extensive facilities for these purposes, customers
Experience with taximeters with a look at the corresponding tables
Experience with taximeters with a look at the corresponding tables Milan Prasil CMI Laboratory of the fundamental metrology V Botanice 4, 150 72 Prague 5 mprasil@cmi.cz Taximeters in EU are subject to
Troubleshooting Guide
Troubleshooting Guide TM Satellite Solutions for Mobile Markets 11200 Hampshire Avenue South, Bloomington, MN 55438-2453 Phone: (800) 982-9920 Fax: (952) 922-8424 www.kingcontrols.com 1305 TROUBLESHOOTING
NDT to Identify Concrete Bridge Deck Deterioration
NDT to Identify Concrete Bridge Deck Deterioration Nenad Gucunski Rutgers University Department of Civil and Environmental Engineering Center for Advanced Infrastructure and Transportation (CAIT) April
G-100/200 Operation & Installation
G-100/200 Operation & Installation 2 Contents 7 Installation 15 Getting Started 16 GPS Mode Setup 18 Wheel Sensor Mode Setup 20 Fuel Calibration 23 Basic Operation 24 Telemetery Screen 27 Entering a Distance
MSAN-001 X-Band Microwave Motion Sensor Module Application Note
1. Introduction HB Series of microwave motion sensor module are X-Band Mono-static DRO Doppler transceiver front-end module. These modules are designed for movement detection, like intruder alarms, occupancy
1955-1956 Chevy Bel-Era
Classic Instruments 1955-1956 Chevy Bel-Era Installation Manual Revised January 2, 2014 Page 1 Table of Contents Table of Contents 2 Welcome to the Team of Classic Instruments! 3 55-56 Chevy Part Identification
MEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
Synthetic Sensing: Proximity / Distance Sensors
Synthetic Sensing: Proximity / Distance Sensors MediaRobotics Lab, February 2010 Proximity detection is dependent on the object of interest. One size does not fit all For non-contact distance measurement,
Aeronautics. Airframe Maintenance Technician
Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory
Design Verification. Introduction
Design verification is an essential step in the development of any product. Also referred to as qualification testing, design verification ensures that the product as designed is the same as the product
Enhanced calibration High quality services from your global instrumentation partner
Products Solutions Services Enhanced calibration High quality services from your global instrumentation partner Services 2 Calibration One trusted advisor Get the best to meet all your critical application
Active and Passive Microwave Remote Sensing
Active and Passive Microwave Remote Sensing Passive remote sensing system record EMR that was reflected (e.g., blue, green, red, and near IR) or emitted (e.g., thermal IR) from the surface of the Earth.
Tube Control Measurement, Sorting Modular System for Glass Tube
Tube Control Measurement, Sorting Modular System for Glass Tube Tube Control is a modular designed system of settled instruments and modules. It comprises measuring instruments for the tube dimensions,
NMEA 0183 INSTALLATION AND OPERATING GUIDELINES
NMEA 0183 INSTALLATION AND OPERATING GUIDELINES Revised July 2010 8.1.3 Documentation The following documentation shall be provided to the owner for each interfaced system and shall be kept on file by
BASIC SOUND LEVEL METERS
BASIC SOUND LEVEL METERS Typical Applications: Occupational Noise Measurements Noise Ordinance Enforcement Community Noise Assessment Fire & Emergency Notification Alarm Testing Maintenance Inspections
Optical Fibres. Introduction. Safety precautions. For your safety. For the safety of the apparatus
Please do not remove this manual from from the lab. It is available at www.cm.ph.bham.ac.uk/y2lab Optics Introduction Optical fibres are widely used for transmitting data at high speeds. In this experiment,
'INSIZE' is becoming an international brand.
Insize is based in Suzhou (Shanghai area), in the same area as the factories of other famous metrology brands in China such as Mitutoyo, Mahr and Starrett. Founded in 1995, Insize Co., Ltd. has always
Sensors Collecting Manufacturing Process Data
Sensors & Actuators Sensors Collecting Manufacturing Process Data Data must be collected from the manufacturing process Data (commands and instructions) must be communicated to the process Data are of
RF Measurements Using a Modular Digitizer
RF Measurements Using a Modular Digitizer Modern modular digitizers, like the Spectrum M4i series PCIe digitizers, offer greater bandwidth and higher resolution at any given bandwidth than ever before.
TABLE OF CONTENTS 11.0 WARRANTY
11.0 WARRANTY OI-1009.205L TABLE OF CONTENTS ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality
OMNIYIG. .5 TO 2 GHz, 1 TO 4 GHz, 6 to 18 GHz Thin Film YIG-TUNED OSCILLATORS OUTLINE DIMESIONS MOUNTING SURFACE GND +15V + TUNE - HTR HTR
. TO Hz, 1 TO Hz, to 1 Hz Thin Film YITUNED OSCILLATORS Highly Reliable StateoftheArt ThinFilm Technology s. to 1 Hz oscillators employ thinfilm technology, coupled with aas FET transistors, and were designed
Measuring equipment in a laboratory.
Measuring equipment in a laboratory. Laboratory and metrology are two words that practically do not function separately. They are integrally connected to measuring equipment for tests and measurements.
Introduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically
Introduction to Linear Actuators: Precision Linear Motion Accomplished Easily and Economically Part 2 of 2 In Part 1, we discussed the basics of a stepper motor-based linear actuator, one of the most effective
A Measurement of 3-D Water Velocity Components During ROV Tether Simulations in a Test Tank Using Hydroacoustic Doppler Velocimeter
A Measurement of 3-D Water Velocity Components During ROV Tether Simulations in a Test Tank Using Hydroacoustic Doppler Velocimeter Leszek Kwapisz (*) Marek Narewski Lech A.Rowinski Cezary Zrodowski Faculty
SSI. Modbus Analogue Output DEVICENET ETHERNETIP. Zero Slip, Zero Wear. Exact Measurement. No Moving Parts. Permanently Calibrated.
Contact Wheel / Encoder Counter Length & Speed Errors through slippage and wear, result in Short Lengths and Give Away. Maintenance Costs, through calibration downtime and replacement parts. Marking and
Software Verification and Validation
Software Verification and Validation Georgia L. Harris Carol Hockert NIST Office of Weights and Measures 1 Learning Objectives After this session, using resources and references provided, you will be able
26 3213.13 Diesel Engine Driven Generators Page 1 of 6
Last Update: December 8, 2014 A. Description of System Consultant s Handbook Page 1 of 6 1. Provide a diesel engine driven electric generating unit, factory assembled, tested and certified to operate at
SAN JOAQUIN VALLEY AIR POLLUTION CONTROL DISTRICT AGRICULTURAL PUMP ENGINE COMPONENT
SAN JOAQUIN VALLEY AIR POLLUTION CONTROL DISTRICT HEAVY-DUTY ENGINE PROGRAM AGRICULTURAL PUMP ENGINE COMPONENT DIESEL ENGINE TO ELECTRIC MOTOR REPOWER OPTION ELIGIBILITY CRITERIA AND APPLICATION GUIDELINES
Sea Eagle FCCT. Naval Electro-Optical Fire Control System
CHESS DYNAMICS Sea Eagle FCCT Naval Electro-Optical Fire Control System Sea Eagle FCCT Sea Eagle FCCT (Fire Control Compact Turret) is an advanced electro-optical fire control system, optimised for deployment
Propsim enabled Aerospace, Satellite and Airborne Radio System Testing
www.anite.com Propsim enabled Aerospace, Satellite and Airborne Radio System Testing Anite is now part of Keysight Technologies Realistic and repeatable real-time radio channel emulation solutions for
Projects. Objective To gain hands-on design and measurement experience with real-world applications. Contents
Projects Contents 9-1 INTRODUCTION...................... 43 9-2 PROJECTS......................... 43 9-2.1 Alarm Radar Sensor................ 43 9-2.2 Microwave FM Communication Link....... 46 9-2.3 Optical
Rail Automation. What is ACSES? usa.siemens.com/rail-automation
Rail Automation What is ACSES? usa.siemens.com/rail-automation What is ACSES? Siemens, a specialist in the area of US Cab Signal design, offers a carborne product that provides both Civil Speed Enforcement
Infrared Thermometer Calibration A Complete Guide
Infrared Thermometer Calibration A Complete Guide Application note With proper setup and planning, infrared calibrations can be accurate. The steps outlined below should be followed to perform accurate
EL PASO COUNTY, TEXAS REQUEST FOR PROPOSALS DIGITAL CONVERSION OF MICROFILM IMAGES AGENDAS AND MINUTES FOR THE COUNTY CLERK
EL PASO COUNTY, TEXAS REQUEST FOR PROPOSALS DIGITAL CONVERSION OF MICROFILM IMAGES AGENDAS AND MINUTES FOR THE COUNTY CLERK I. INTRODUCTION The County of El Paso (Hereafter COUNTY) is seeking proposals
Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43
Data Sheet Electro-Magnetic Flowmeters COPA-XT 2-Wire DT43 2-Wire Operation Significantly reduces installation costs when compared to a traditional 4-wire magmeter. ±0.5% of rate system accuracy. Patented
calibrate confidence with Metrology Concepts: Understanding Test Uncertainty Ratio (TUR) Abstract Introduction White Paper
calibrate with confidence White Paper Metrology Concepts: Understanding Test Uncertainty Ratio (TUR) Authored by Keith Bennett Director of Metrology Howard Zion Director of Technical Operations TRANSCAT
2. THE TEORRETICAL OF GROUND PENETRATING RADAR:
Sixteenth International Water Technology Conference, IWTC 16 2012, Istanbul, Turkey 1 THE USE OF GROUND PENETRATING RADAR WITH A FREQUENCY 1GHZ TO DETECT WATER LEAKS FROM PIPELINES Alaa Ezzat Hasan Ministry
INSTRUCTION MANUAL for UNIBLITZ MODEL DM412 SHUTTER DRIVE MODULE
INSTRUCTION MANUAL for UNIBLITZ MODEL DM412 SHUTTER DRIVE MODULE VINCENT ASSOCIATES 803 LINDEN AVE. ROCHESTER, NEW YORK 14625 SERVICE/ORDERS (800) 828-6972 In NY State (585) 385-5930 Fax (585) 385-6004
814.49. Ordinance on the Protection of Audiences from Exposure to Hazardous Sound Levels and Laser Beams. (Sound Levels and Laser Ordinance, SLO)
English is not an official language of the Swiss Confederation. This translation is provided for information purposes only and has no legal force. Ordinance on the Protection of Audiences from Exposure
PART 1 - INTRODUCTION...
Table of Contents PART 1 - INTRODUCTION... 3 1.1 General... 3 1.2 Sensor Features... 3 1.3 Sensor Specifications (CDE-45P)... 4 Figure 1-1 CDE-45P Sensor Dimensions (standard, convertible style)... 4 PART
USER MANUAL MODEL 2300M SERIES. OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M)
USER MANUAL MODEL 2300M SERIES OpticLink Ethernet Media Converters (2300M, 2310M, 2311M, & 2312M) An ISO-9001 Certified Company Part# 07M2300M Doc# 077321U Rev. A Revised 4/14/03 SALES OFFICE (301) 975-1000
Various Technics of Liquids and Solids Level Measurements. (Part 3)
(Part 3) In part one of this series of articles, level measurement using a floating system was discusses and the instruments were recommended for each application. In the second part of these articles,
ENGINEERING METROLOGY
ENGINEERING METROLOGY ACADEMIC YEAR 92-93, SEMESTER ONE COORDINATE MEASURING MACHINES OPTICAL MEASUREMENT SYSTEMS; DEPARTMENT OF MECHANICAL ENGINEERING ISFAHAN UNIVERSITY OF TECHNOLOGY Coordinate Measuring
Quick Start Guide 00825-0100-4764, Rev DA March 2014. Rosemount 8714D (Calibration Standard) Magnetic Flowtube Simulator
Quick Start Guide 00825-0100-4764, Rev DA Rosemount 8714D (Calibration Standard) Magnetic Flowtube Simulator Quick Start Guide NOTICE This document provides basic guidelines for the Rosemount 8714D. It
AAA AUTOMOTIVE ENGINEERING
AAA AUTOMOTIVE ENGINEERING Evaluation of Blind Spot Monitoring and Blind Spot Intervention Technologies 2014 AAA conducted research on blind-spot monitoring systems in the third quarter of 2014. The research
Rotating Machinery Diagnostics & Instrumentation Solutions for Maintenance That Matters www.mbesi.com
13 Aberdeen Way Elgin, SC 29045 Cell (803) 427-0791 VFD Fundamentals & Troubleshooting 19-Feb-2010 By: Timothy S. Irwin, P.E. Sr. Engineer tsi@mbesi.com Rotating Machinery Diagnostics & Instrumentation
LOW COST MOTOR PROTECTION FILTERS FOR PWM DRIVE APPLICATIONS STOPS MOTOR DAMAGE
LOW COST MOTOR PROTECTION FILTERS FOR PWM DRIVE APPLICATIONS STOPS MOTOR DAMAGE Karl M. Hink, Executive Vice President Originally presented at the Power Quality 99 Conference ABSTRACT Motor protection
SECTION 15950 - TESTING, ADJUSTING, AND BALANCING
SECTION 15950 - TESTING, ADJUSTING, AND BALANCING PART 1 - GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
ALABAMA BOARD OF NURSING ADMINISTRATIVE CODE CHAPTER 610 X 4 LICENSURE TABLE OF CONTENTS
Nursing Chapter 610 X 4 ALABAMA BOARD OF NURSING ADMINISTRATIVE CODE CHAPTER 610 X 4 LICENSURE TABLE OF CONTENTS 610 X 4.01 610 X 4.02 610 X 4.03 610 X 4.04 610 X 4.05 610 X 4.06 610 X 4.07 610 X 4.08
PUMPED Nd:YAG LASER. Last Revision: August 21, 2007
PUMPED Nd:YAG LASER Last Revision: August 21, 2007 QUESTION TO BE INVESTIGATED: How can an efficient atomic transition laser be constructed and characterized? INTRODUCTION: This lab exercise will allow
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM
RTP s NUCLEAR QUALITY ASSURANCE PROGRAM RTP operates under one quality program, whether you purchase products that are commercial grade, nuclear safety-related or industrial safety compliant (IEC 61508).
HOOK-X Series. Operation manual. lowrance.com ENGLISH. HOOK-4x HOOK-5x HOOK-7x
HOOK-X Series Operation manual ENGLISH HOOK-4x HOOK-5x HOOK-7x lowrance.com Copyright 2016 Navico All rights reserved. Lowrance and Navico are registered trademarks of Navico. Navico may find it necessary
Technical Management? We Don t Need No Technical Management!
Technical Management? We Don t Need No Technical Management! Speaker/Author: Dr. Henrik S. Nielsen HN Metrology Consulting, Inc. HN Proficiency Testing, Inc. 10219 Coral Reef Way Indianapolis, Indiana,
US Environmental Protection Agency Office of Pesticide Programs
US Environmental Protection Agency Office of Pesticide Programs Office of Pesticide Programs Microbiology Laboratory Environmental Science Center, Ft. Meade, MD Standard Operating Procedure for Monitoring
CHECKLIST FOR APRON OPERATIONS INSPECTION
Section/department/division Aerodromes & Facilities Form Number: CA 139-08 Telephone number: 011-545-1000 Fax Number: 011 545 1451 Physical address Ikhaya Lokundiza, 16 Treur Close, Waterfall Park, Bekker
Application Note AN-00125
Considerations for Operation within the 260 470MHz Band Introduction This application note is designed to give the reader a basic understanding of the legal and technical considerations for operation of
Ramon 2.2 Radon-Monitor
Ramon 2.2 Radon-Monitor Applications Measurement Modes - Technology - Quality 1 1) Application of the Ramon 2.2: The Ramon2.2 Radon monitor is a unique device and it can be best described as an automatic,
CHAPTER 11: Flip Flops
CHAPTER 11: Flip Flops In this chapter, you will be building the part of the circuit that controls the command sequencing. The required circuit must operate the counter and the memory chip. When the teach
SCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
Distance-To-Fault (DTF) Measurement in 75 Ohm Systems with the R&S FSH3-TV
Products: R&S FSH3-TV Distance-To-Fault (DTF) Measurement in 75 Ohm Systems with the R&S FSH3-TV Application Note Measuring cable characteristics is important when it comes to installing and servicing
Arm2. Arm Arm22. Articulated Arm. machines MEASURING. tridimensional measuring FRATELLI ROTONDI
Arm Arm22 2 Arm2 tridimensional measuring Articulated Arm MEASURING machines FRATELLI ROTONDI Arm2 MEASURING Arm2Arm2 SOFTWARE Software in WINDOWS environment: sura tridimesio - elements with definite
Removing the Mystery from OTDR Measurements. Keith Foord Product Manager Greenlee Communications
Removing the Mystery from OTDR Measurements Keith Foord Product Manager Greenlee Communications Why an OTDR? Terminology Theory Standards Key specifications Trade-offs Cleaning and Inspection Measurements
Using a Laptop Computer with a USB or Serial Port Adapter to Communicate With the Eagle System
Using a Laptop Computer with a USB or Serial Port Adapter to Communicate With the Eagle System ECU DB9 USB 20-060_A.DOC Page 1 of 18 9/15/2009 2009 Precision Airmotive LLC This publication may not be copied
ISC Dual Frequency WFS RFPD Test Procedure:
LASER INTERFEROMETER GRAVITATIONAL WAVE OBSERVATORY LIGO Laboratory / LIGO Scientific Collaboration LIGO 08 January 2013 ISC Dual Frequency WFS RFPD Test Procedure: Richard Abbott Distribution of this
Consumer Emergency Vehicle Alert System
Consumer Emergency Vehicle Alert System Robert Anderson, Austen Gray, Clayton Moore, Nicholas Saunders Department of ECCS and Department of Mechanical Engineering Ohio Northern University Ada, Ohio 45810
OPERATIONAL STANDARD
1 of 11 1. Introduction The International Safe Transit Association (ISTA), a non-profit association whose objective is to prevent product damage and excess packaging usage within the distribution environment.
Understanding the Flo-Dar Flow Measuring System
Understanding the Flo-Dar Flow Measuring System Independent tests verify non-contact flowmeter is highly accurate under both open channel and surcharge conditions TM Flo-Dar is the only non-contact open
Dynamic Frequency Selection (DFS) and the 5GHz Unlicensed Band
Dynamic Frequency Selection (DFS) and the 5GHz Unlicensed Band by Mark Briggs, Principal Engineer, Elliott Laboratories- An NTS Company Note: This article combines the content from several papers released
Business Services and Consulting Sample Proposal
Business Services and Consulting Sample Proposal Scroll down to see the rest of this truncated sample. When purchased, the complete sample is 12 pages long and was written using these Proposal Pack templates:
Subminiature Load Cell Model 8417
w Technical Product Information Subminiature Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential connection...
Harmonics in your electrical system
Harmonics in your electrical system What they are, how they can be harmful, and what to do about them Abstract Harmonic currents, generated by non-linear electronic loads, increase power system heat losses
ALABAMA STATE BOARD OF RESPIRATORY THERAPY ADMINISTRATIVE CODE CHAPTER 798-X-5 LICENSURE TABLE OF CONTENTS
Respiratory Therapy Chapter 798-X-5 ALABAMA STATE BOARD OF RESPIRATORY THERAPY ADMINISTRATIVE CODE CHAPTER 798-X-5 LICENSURE TABLE OF CONTENTS 798-X-5-.01 798-X-5-.02 798-X-5-.03 798-X-5-.04 798-X-5-.05
PERSONNEL REQUIREMENTS FOR RADIO FREQUENCY SPACE TO GROUND RESEARCH
PERSONNEL REQUIREMENTS FOR RADIO FREQUENCY SPACE TO GROUND RESEARCH The following paragraphs set forth the Government's minimum desired requirements deemed necessary to perform the tasks set forth in the
NORTH AMERICA OPERATIONS. (Fairmont and Montreal Facilities) QUALITY MANUAL. Prepared to comply with the requirements of ISO 9001:2008
WEIGH-TRONIX CANADA ULC NORTH AMERICA OPERATIONS (Fairmont and Montreal Facilities) QUALITY MANUAL Prepared to comply with the requirements of ISO 9001:2008 Meets or exceeds the requirements for design,
LOCATION DEPENDENCY OF POSITIONING ERROR IN A 3-AXES CNC MILLING MACHINE
th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 214) December 12 th 14 th, 214, IIT Guwahati, Assam, India LOCATION DEPENDENCY OF POSITIONING ERROR IN
Multimeter measurements on variable frequency drives using the new Fluke 289 DMM
Multimeter measurements on variable frequency drives using the new Fluke 289 DMM Application Note Editor s note: For similar instructions using the Fluke 87V DMM, reference Fluke article 12345. In the
Building Commissioning 17900-1
SECTION 17900 BUILDING COMMISSIONING PART 1 - GENERAL 1.01 WORK DESCRIPTION: A. General: 1. The Commissioning process is a joint team effort to ensure that all mechanical equipment, controls, and systems
RPLIDAR. Low Cost 360 degree 2D Laser Scanner (LIDAR) System Development Kit User Manual. 2014-2 Rev.1
RPLIDAR Low Cost 360 degree 2D Laser Scanner (LIDAR) Development Kit User Manual 2014-2 Rev.1 Team Contents: 1. OVERVIEW... 2 ITEMS IN DEVELOPMENT KIT... 2 RPLIDAR... 2 USB ADAPTER... 3 2. CONNECTION AND
Model 601A02. Low-cost Industrial ICP Accelerometer. Installation and Operating Manual
Model 601A02 Low-cost Industrial ICP Accelerometer Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464 24-hour SensorLine:
Sensors and Cellphones
Sensors and Cellphones What is a sensor? A converter that measures a physical quantity and converts it into a signal which can be read by an observer or by an instrument What are some sensors we use every
Rechargeable Energy Storage System (RESS) Charging
ETA-HTP08 Revision 1 Effective October 1, 2004 Rechargeable Energy Storage System (RESS) Charging Prepared by Electric Transportation Applications Prepared by: Roberta Brayer Date: Approved by: Donald