INLINE PUMPS WITH FIXED-SPEED MOTOR, 3x400V AE-series, threaded G3/4 - G11/4 L_-, AL_- and AKN-series, flanged DN32 - DN300

Transcription

1 LOREM IPSUM JE ZULT MAAR HZ m Head m/s m/s m/s m/s m/s Ø m Ø Ø Ø Ø l/s Flow kw Shaft power P Ø m/h Ø 9 Ø 7 Ø kw 9 7 Total input power P Ø INLINE PUMPS WITH FIXED-SPEED MOTOR, xv AE-series, threaded G/ - G/ L_-, AL_- and AKN-series, flanged DN - DN l/s Ø Ø Ø l/s

2 General technical data AE series pumps: Centrifugal pumps equipped with thread connections. Pumps can be used as circulation, pressure boosting and transfer pumps for clean liquids. L, AL and AKN series pumps: Inline centrifugal pumps equipped with flange connections. Applications: Grey cast iron (L, AL and AKN) pumps can be used as circulation, pressure boosting and transfer pumps for clean liquids. Nodular cast iron (LH, ALH and AKNH) pumps can be used in power plants and as pressure boosting pumps for primary district heating. Bronze (LP and ALP) pumps can be used as domestic hot water, circulation, pressure boosting and transfer pumps for clean oxygen-rich and some slightly aggressive liquids. Stainless steel AISI (LS and ALS) pumps can be used as circulation, pressure boosting and transfer pumps for acid and alkaline liquids. Note! The suitability of materials and seals for the liquid to be pumped must always be confirmed when selecting a pump. Quick Selection Chart AE-, L- and AKN-series, Hz m / Subject to change without prior notice.

3 Quick Selection Chart L-, AL- and AKN-series - ja -poles, Hz m Quick Selection Chart L-, AL- and AKN-series -poles, Hz m / Subject to change without prior notice. 9

4 Standard materials and fields of application AE_- / L_- / AL_- / AKN_-pumps Connection Grey cast iron Nodular cast iron Bronze Stainless steel Stainless steel Shaft seal, PN O-ring O-ring Motor G or DN EN-GJL-, PN EN-GJS-, PN CuSnZn, PN AISI, PN SS 7- SMO Ø [mm], materials Size [mm] Material [kw] G / AE-/ no no no no, carbon/sic Viton X, NBR,-, - - AE-/ no no no no, carbon/sic Viton X, NBR,-, G AE-/, -/ no AEP-/, -/ no no, carbon/sic Viton X, NBR,-, - - AE-/, -/ no AEP-/, -/ no no, carbon/sic Viton X, NBR,-, G / AE-/, -/ no AEP-/, -/ no no, carbon/sic Viton X, NBR,-,7 - - AE-/, -/ no AEP-/, -/ no no, carbon/sic Viton X, NBR,-, L-/ no no no no, carbon/sic EPDM X, NBR,-, DN L-/ no no no no, carbon/sic EPDM X, NBR,-, no no no ALS-/ no, carbon/sic EPDM X, NBR,-,7 no no no ALS-/ no, carbon/sic EPDM X, NBR,-, no no no ALS-/ no, carbon/sic EPDM X, NBR,-, DN no no no ALS-/ no, carbon/sic EPDM X, NBR,-, L-A/ no no no no, carbon/sic EPDM X, NBR,-,7 L-A/ no no no no, carbon/sic EPDM X, NBR,-, L-A/ no LP-A/ no no, carbon/sic EPDM X NBR,-, L-B/ no LP-B/ no no, carbon/sic EPDM X NBR, no LH-D/ no no no, carbon/sic EPDM X NBR,7-, DN L-D/ LH-D/ LP-D/ no no, carbon/sic EPDM X NBR,- L-C/ LH-C/ LP-C/ no no, carbon/sic EPDM X NBR,- L-S/ LH-S/ no no no, carbon/sic EPDM X EPDM,-, L-S/ LH-S/ no no no, carbon/sic EPDM X EPDM,-, L-A/ LH-A/ no no no, carbon/sic EPDM 79, X,7 EPDM,- no no no LS-B/ no, carbon/sic EPDM 79, X,7 EPDM,- DN L-B/ LH-B/ no LS-B/ no, carbon/sic EPDM 79, X,7 EPDM,-7, no no ALP-/ no no, carbon/sic EPDM 79, X,7 EPDM,7- no no ALP-/ no no, carbon/sic EPDM 79, X,7 EPDM,-7, L-A/ LH-A/ no no no, carbon/sic EPDM 79, X,7 EPDM,7- L-A/ LH-A/ no no no, carbon/sic EPDM 79, X,7 EPDM,-7, DN no no no ALS-/ no, carbon/sic EPDM 79, X,7 EPDM,7- no no no ALS-/ no, carbon/sic EPDM 79, X,7 EPDM,-7, L-S/ LH-S/ no no no, carbon/sic EPDM X EPDM,-7, L-S/ LH-S/ no no no, carbon/sic EPDM X EPDM 7,-, AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM 79, X,7 EPDM,- AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM 79, X,7 EPDM -7, AKN-/ AKNH-/ no no no, carbon/sic EPDM X NBR,- DN AKN-/ AKNH-/ no no no, carbon/sic EPDM X NBR 7,- AL-/ ALH-/ no ALS-/ no, carbon/sic EPDM 9/9X gasket -, L-S/ LH-S/ LP-S/ no no, carbon/sic EPDM x, EPDM - L-S/ LH-S/ LP-S/ no no, carbon/sic EPDM x, EPDM -7 L-S/ LH-S/ LP-S/ no no, carbon/sic EPDM x, EPDM AKN-7/ AKNH-7/ no no no, carbon/sic EPDM X NBR - AKN-7/ AKNH-7/ no no no, carbon/sic EPDM X NBR - AL-9/ ALH-9/ no ALS-9/ ALM-9/, carbon/sic EPDM 9/9X gasket - DN AL-9/ ALH-9/ no ALS-9/ ALM-9/, carbon/sic EPDM 9/9X gasket -7 no no ALP-/ no no, carbon/sic EPDM 9/9X gasket - no no ALP-/ no no, carbon/sic EPDM 9/9X gasket -7 L-S/ LH-S/ no LS-S/ no, carbon/sic EPDM X 7 EPDM,-7 L-S/ LH-S/ no LS-S/ no, carbon/sic EPDM X 7 EPDM - no no ALP-/ no no, carbon/sic EPDM 9/9X gasket,- DN no no ALP-/ no no, carbon/sic EPDM 9/9X gasket - AL-/ ALH-/ no ALS-/ ALM-/, carbon/sic EPDM 9/9X gasket,- AL-/ ALH-/ no ALS-/ ALM-/, carbon/sic EPDM 9/9X gasket - AL-/ ALH-/ ALP-/ ALS-/ ALM-/, carbon/sic EPDM x, EPDM - AL-/ ALH-/ ALP-/ ALS-/ ALM-/, carbon/sic EPDM x, EPDM -, DN AL-/ ALH-/ ALP-/ ALS-/ ALM-/, carbon/sic EPDM x, EPDM -, AL-/ ALH-/ ALP-/ ALS-/ ALM-/, carbon/sic EPDM x, EPDM -7 AL-/ ALH-/ ALP-/ ALS-/ ALM-/, carbon/sic EPDM x, EPDM AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM X 7 EPDM - AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM X 7 EPDM DN AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM X 7 EPDM 7 AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM X 7 EPDM - AL-/ ALH-/ ALP-/ ALS-/ no, carbon/sic EPDM X 7 EPDM 7- DN AL-/ ALH-/ no ALS-/ no 7, carbon/ceramic. EPDM 7 X EPDM / Subject to change without prior notice.

5 Series Pressure class / Housing material Sealing Impeller Pump Difference in materials temperature [ C ] Name Marking flange shaft AE / L / PN / grey cast iron EN-GJL- EN-GJL- EN-GJL- AISI9 AE / L_- impeller Noryl GFN AL / AKN AL_- impeller EN-GJS- LH / PN / nodular cast EN-GJS- EN-GJS- EN-GJL- AISI9 ALH- impeller EN-GJS- ALH / AKNH (depending on iron seal constrution) Bronze impeller available to AEP / LP / ALP PN / bronze CuSnZn CuSnZn CuSnZn AISI9 all pumps LS / ALS PN / stainless steel AISI AISI AISI AISI9 On special request also (depending on seal SS (AISI 9) ja SS7 SMO construction) (LM / ALM-pumps) Standard shaft material is Stainless steel AISI 9. In LM / ALM-pumps shaft material is Stainless steel SMO, SS7. Structure Pump AE, L and AL series pumps are monoblock centrifugal pumps equipped with a dry asynchronous motor. The pump impeller is installed directly onto the shaft of the electric motor (no separate couplings). Electric motor The electric motor of AE, L and AL series pump is a Kolmeks asynchronous designed for pump use. The electric motor is highly efficient and has low noise levels. The electric motor is suitable for frequency converter use. Standard voltages: / V, Hz, kw 9/ V, Hz kw Enclosure classes: IP, kw, r/min, kw r/min IP kw, r/min, kw r/min Insulation class: F Duty type: S (continuous duty) Ambient temperature: max. + C NOTE! Kolmeks electric motors are available with other enclosure classes and voltages by request. Connections The AE series pump is equipped with G thread connections according to ISO /. The L, AL and AKN series pump is equipped with flanged connections (PN or PN) according to ISO 7 Flanges to ANSI/JIS standards are available on request. Seals The shaft seal of an AE series pump is a single mechanical seal. The pump housing seal is an O-ring The standard shaft seal on L, AL and AKN series pumps is a single mechanical seal. The pump housing seal is an O-ring or gasket. By request, there are several seal materials and structure alternatives available depending on the properties and temperature of the liquid. Standard surface treatment The pumps are painted according to Standard SFS-EN ISO 9-, AY/-FeSa½. The colour is RAL. Epoxy surface treatment and colour alternatives are available by request. / Subject to change without prior notice. 7

6 Rating plate Material: P = Bronze H = Nodular Cast Iron S = Stainless steel Pump type Serial number, Duty point and max. temperature of liquid Minimum efficiency index (MEI) Motor type Nominal voltages and currents Bearing types, Accessories: X = Pump without baseplate P = Single phase motor N = Seal kit no.7 T = External shaft seal H = Recirculation KT = Double shaft seal Sn = Non-standard shaft seal Kn = Non-standard surface treatment Ln = Motor thermal protectors En = Other difference (e.g. EXE) Vn = Special voltage Non-standard material of impeller: PM = Bronze SS = Stainless steel AISI Motor code Pressure class and impeller diameter Electrical power at duty point (if required) Continuous duty Nominal power and rotation speed Enclosure and insulation class Efficiency of electric motor Manufacturer, Country and CE marking Seal structure alternatives Standard structure - Single mechanical seal - Max. operating temperature + C. The standard-constructed shaft seal can also be used for water-glycol mixtures and most other indirect refrigeration systems. The recommended glycol is propylene glycol and the concentration can be up to %. Most often, a concentration of % is adequate. Internal flushing - Single mechanical seal - Recirculation from the discharge flange of the pump to the seal chamber which flushes the seal - Max. + C water - Available for flange sizes DN DN.. This is indicated with an additional marking H in the pump type e.g. LS-B/H. External flushing - Single mechanical seal - Plugged pipe to the seal chamber using which, it is possible to flush the seal with external pressure if required - Available for flange sizes DN pumps - Crystallising and accumulative liquids 7 / Subject to change without prior notice.

7 External seal - Externally-mounted single mechanical Teflon bellows - Available for flange sizes DN ALS pumps - Extremely corrosive liquids, e.g. sulphuric acid - Marking T in the pump type e.g. ALS-/T - NOTE! Maximum working pressure bar Double mechanical seal system (cartridge) - Two opposing seals with sealing liquid brought from outside (circulation). The pressure of the liquid can be lower or higher than that of the liquid being pumped - Available for flange sizes DN pumps - Max. operating temperature + C for water - Requires a separate seal water monitoring unit (available from Kolmeks) - Marking KT in the pump type e.g. ALS-/KT - Hot, crystallising and accumulative liquids Installation Ensure the following when installing the pump: - Enough room for service and inspection - Possibility to use lifting and transfer devices if required - Shut-off valves on both sides of the pump, allowing the position of the motor unit and the electrical terminal connection box to be changed by removing the motor unit from the pump housing and by installing it in the required position ---(not applicable when using internal seal flushing, marking H which is standard in the LH/ALH series) Kolmeks inline pumps are suitable for both vertical and horizontal pipe mounted positions. Small pumps are usually installed without a base in a vertical or horizontal position. Large pumps are installed with the base in a vertical position. When selecting a method of installation, please consider at least the following: Enough room for installation and service Piping strength, rigidity and support Vibration and noise level requirements Pump installability Pump serviceability o number of service personnel and availability of lifting equipment o pump weight Recommended general limits without the base: Large pumps are fastened by their foot onto a freely moving concrete plinth, which is separated from the floor.by a -mm thick rubber or cork mat for example. The weight of the concrete base must be about. times the weight of the pump. Size DN... DN DN DN DN Power max., kw kw kw 7, kw 7, kw / Subject to change without prior notice. 7

8 Pump service Parts for AE-pumps Electric motor Pump housing Impeller Sealing flange Nut / Screw Washer Key Mechanical seal V-ring O-ring / gasket Nut / Screw Pipe joint ( AE-, AE-) Parts for L_-, AL_-, ja AKN- pumps Electric motor Pump housing Impeller Sealing flange Base plate (not always) Nut / Screw Washer Key Mechanical seal V-ring (not always) O-ring / gasket Nut / screw 7 Screw Pipe joint (ALH-serie) Pipe joint (ALH-serie) Pipe (ALH-serie) 7 / Subject to change without prior notice.

9 Motor unit The pump motor unit is a new stand-by operation unit which includes: ) Motor ) Sealing flange ) Impeller ) Seals If a motor malfunction or a seal leak occurs, replacing the motor unit is simple and quick and does not require long periods of stoppage. No procedures need to be carried out on the piping, because there is no need to detach the pump housing. INLINE PUMPS - AE, L, AL and AKN Shaft seal If a seal leak occurs in a new pump, e.g. during commissioning, it is possible to replace only the shaft seal with a new one. Parts of single mechanical shaft seal Rotating ring Stationary ring Body/bellows Spring O-ring / Subject to change without prior notice. 7

10 Reading curves and selecting a pump AL_-/ DN Selecting a fixed speed pump from Hz pump curve (curves on the left) E.g. duty point: flow = l/s, head = m, liquid: water + C.. Use the quick selection chart at the beginning of the catalogue or browse through the product catalogue in order to find a pump of the correct size range such that the required flow l/s is at the best efficiency point (ɳ = %).. Select the impeller size [Ø= mm] from the QH curve such that a vertical line is drawn at the point of l/s flow through all curves and, equivalently, a horizontal line at the point of m head.. Find the impeller size at the intersection= mm. Note! If the intersection falls between two impeller sizes, the impeller diameter is selected halfway between the two sizes.. Read the nominal shaft power of the motor from the section in which the QH curve is. In this example, the motor nominal shaft power is PN = 7 kw. According to the shaft power P, P = 7 kw, the motor nominal power becomes PN = 7 kw (the closest highest motor nominal power). AL-/ ALH-/ ALP-/ ALS-/ ALM-/ Hz Hz Motor V KZ- J F KZ- K F KZ- J F KZ-7 J F KZ- K F KZR- H F Motor -V(-V) KZ- K F KZ- J F KZ-7 J F KZ- K F KZR- H F P N [kw] I N [A] [kg] H [mm] 7 7,, 9 9, ,9 9, 9 7 9, P N [kw] () I N [A], (,) [kg] H [mm] 9 (), (,9) (9), (9,) 9 (), (9,) 9 7 () 99,9 (9,) Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s 7 m/s m/s m/s m/s m/s Ø9 Ø 7 9 P [kw] Ø Ø 7kW Ø Ø 9 7 Ø9 Ø 9 7 P [kw] Ø Ø Ø Ø. Check the nominal current of the electric motor from the column on the right-hand side of the nominal power column in the table, IN =.9 A. Select an overload protection for the motor according to nominal current. Ø Ø. Read the pump weight from the same table [kg] = kg. 7. For energy calculation, read the electrical power of the device = P [kw], from the P curve with a required flow of Q = l/s and at the point of the selected impeller size, Ø = mm. In this example, the device electrical power is P= 7 kw.. Energy costs = Electrical power P [kw] x energy price [ / kwh] x operating time [h]. Characteristic curves apply to + C water. Note! Please contact Kolmeks for additional information on the following issues!. When pumping liquids whose viscosity differs from that of water, the effect of viscosity must be considered in pump selection.. Liquid density is directly proportional to the power requirement. The sufficiency of motor power must be checked for liquids denser than water. 7 / Subject to change without prior notice.

11 Selecting an optimal pump for frequency converter operation from a Hz curve CORRECTLY-SIZED PUMP AL-/ ALH-/ ALS-/ ALM-/ OVERSIZED PUMP AL-/ ALH-/ ALP-/ ALS-/ ALM-/ Hz Hz Motor V KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF Motor -V(-V) KH- C F KH- E F KH- G F KZ- F F KZ- G F P [kw] I [A] [kg] N N H [mm], 77,,9 7,, 9,7,,, 9 7 P [kw] I [A] [kg] H [mm] N N (,),7 (,) 77, (,), (,) 7, (9), (,7) 9 (), (,) () 9, (,7) Hz Hz Motor V KZ- G F KZ- G BF KZ- K BF KZ- K F KZ- J F Motor -V(-V) KZ- G BF KZ- K BF KZ- K F KZ- J F KZ- K F P N [kw] I N [A] [kg] H [mm], 7,, 7, 7, 7 7, P N [kw] I N [A] [kg] H [mm], (), (,) 7 (), (,) 7 () 7, (7,) 7 () 9, (,) (), (,) KZ- G BF, (), (,) 9 7 KZ- K BF (), (,) 7 KZ- K F () 7, (7,) 7 7 Hz Hz r/min DN r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s Ø9 Ø P [kw] Ø Ø9 7 9 Ø Ø9 7 9 Ø Ø P [kw] Ø Ø9 7 9 Ø Ø9 7 9 Ø Ø9 7 9 Hz Hz r/min DN r/min DN m/s m/s m/s m/s [m] Ø 7 P [kw] Ø Ø Ø Ø Ø Ø 7 7 m/s m/s m/s m/s m/s Ø [m] 7 P [kw] Ø Ø Ø Ø Ø Ø Ø Subject to change without prior notice.9. E.g. duty point: flow = l/s, head = m, pumped liquid being water + C.. Use the quick selection chart at the beginning of the catalogue or check the datasheets in the product catalogue to find a pump in the correct size range such that the required flow is in the best efficiency point. The AL-/ pump is selected because its efficiency is the best in the required duty point ɳ = 7%.. The duty point is outside the operating range of the AL-/ Hz pump.. Usually when selecting the pump from the Hz curve to the required duty point (Q = l/s, m), the next largest pump is selected. In the above example, we choose AL-/, Ømm, PN = kw, ɳ = 7%. This is an oversized pump whose best flow range is within l/s, where its efficiency is the highest ɳ = %.. Select the pump AL-/ from the Hz curve, whereby the impeller is Ø7mm.The nominal motor shaft power PN is selected according to the shaft power curve P. Shaft power P = kw and the next higher nominal power is PN = kw. In this example, we choose AL-/, Ø7mm, PN = kw, ɳ = 7%. QH curves are available for Hz and Hz on the same datasheet in order to facilitate the customer s selection of the most energy efficient pump for frequency converter operation. How does careful pump selection benefit the customer?. The pump saves energy, because it has been selected from the range of the best efficiency.. The total purchase cost is lower, because the pump, the electric motor and the frequency converter are one size smaller.. The pumps are designed to operate at the best efficiency where they run with low noise and vibration and have a long service life.. A smaller pump saves energy in partial flows, because its efficiency is better for the entire operating range. / Subject to change without prior notice. 77

12 and cavitation re < av re < p + h - h suction - p h re < p suction - p h The av value of a system refers to the actual difference between inlet pressure (in the suction flange) and vapour pressure of the liquid being pumped. The re value required of the pump must be smaller than the av value in order to prevent cavitation from occurring. A safety margin of. m must be added to the measurement value. av = difference between available inlet pressure (in suction flange) and vapour pressure of liquid being pumped re = value required by the pump p = Absolute air pressure p h = Absolute liquid vapour pressure at the operating temperature h = Liquid geodetic suction head h suction = Pressure losses in suction pipes p suction = Absolute suction pressure p h [m] Vapour pressure (water) T[ o C] At normal air pressure levels ( m water column,, mbar = 7 mm Hg), clean water boils at C. It can be seen from the curve that water boils at C when the absolute pressure is m wc (i.e. m wc below atmospheric pressure). The boiling point of water at less than C can be achieved at a very low pressure. Vice versa, at the top of Mount Everest, where air pressure is about. bar ( m), water boils at + C. Example: Open tank (p = air pressure = m) where the water temperature is + 9 C (ph = 7 m), suction pipe losses m and liquid suction head flange + m. The pump duty point l/s, 7. m. Is the selected pump suitable for the use in question? An example of calculation: Pump type: AL_-//Ø, kw Liquid level p = air pressure re < p + h - h suction - p h re < m + m - m - 7 m re < m h When observing the safety margin. m, the re value of the pump must be smaller than. m in order to prevent the pump from cavitating. re of pump AL_-//Ø =.7 m, whereby it will not cavitate. water, + 9 C p suction h suction 7 / Subject to change without prior notice.

13 AE-/ Hz Hz Motor V OP-7 N OP-7 B N OP-7 N Motor -V(-V) OP-7 B N OP-7 N P N [kw] I N [A] [kg] H [mm],, 7,, 7,,, 7 P N [kw] I N [A] [kg] H [mm], (,), (,) 7, (,9), (,), 7 Hz r/min G / Hz r/min G / [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s 7 7 Ø Ø,,,,,,,,,, Q [m /h] P [kw], Ø Ø7,,,,,,,,,,,,, Ø7 Ø,,,,,,,,,, Ø Ø7,,,,,,,,,,,,,,,,,,, P [kw], Ø Ø7,,,,,,,,,,,,,, Ø Ø7,,,,,,,,,, Ø Ø7,,,,,,,,, / Subject to change without prior notice. 79

14 AE-/ Hz Hz Motor V OP-7 N OKN- D N Motor -V(-V) OP-7 N OKN- D N KH-7 N P N [kw] I N [A] [kg] H [mm],,7,,,7, P N [kw] I N [A] [kg] H [mm], (,),7 (,7),, (,7), (,),, (,), (,) 9 Hz r/min G / Hz r/min G / [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø,,,,,,,,,, P [kw] Ø, Ø7,,,,,,,,,,,, Ø, Ø7,,,,,,,, Ø Ø7,,,,,,,,,,,,,,,,,9, P [kw] Ø, Ø7,,,,,,,,,,,,, Ø7 Ø,,,,,,,,, Ø Ø7,,,,,,,, / Subject to change without prior notice.

15 AE-/ AE-/ AEP-/ AEP-/ Hz Hz Motor V OP-7 B N OP-7 N Motor -V(-V) OP-7 B N OP-7 N P N [kw] I N [A] [kg] H [mm],, 9, 7,,, 7 P N [kw] I N [A] [kg] H [mm], (,), (,) 9, 7, (,9), (,), 7 Hz r/min G Hz r/min G [m] [m] m/s m/s m/s m/s m/s m/s 7 7 Ø Ø,,,,,,,,, P [kw], Ø, Ø7,,,,,,,,,,, Ø,, Ø7,,,,,,,,,, Ø Ø7,,,,,,,,,,,,,,,,,, P [kw], Ø, Ø7,,,,,,,,,, P, [kw], Ø,, Ø7,,,,,,,,,, Ø Ø7,,,,,,,,, / Subject to change without prior notice.

16 AE-/ AE-/ AEP-/ AEP-/ Hz Hz Motor V OP-7 N OKN- D N Motor -V(-V) OP-7 N OKN- D N KH-7 N P N [kw] I N [A] [kg] H [mm],,7,,,7, P N [kw] I N [A] [kg] H [mm], (,),7 (,7),, (,7), (,),, (,), (,) 7 9 Hz r/min G Hz r/min G [m] m/s m/s m/s m/s m/s m/s m/s m/s [m] Ø 7, Ø,,,,,,,,,,,, P [kw] Ø,, Ø7,,,,,,,,,,, Ø, Ø7,,,,,,,, Ø Ø7,,,,,,,,,,,,,,, P [kw], Ø,9,, Ø7,,,,,,,,,,,,, Ø7 Ø,,,,,,,,, Ø Ø7,,,,,,,, / Subject to change without prior notice.

17 AE-/ AE-/ AEP-/ AEP-/ Hz Hz Motor V OP-7 N OKN-L D N Motor -V(-V) OP-7 N OKN-L D N P N [kw] I N [A] [kg] H [mm],,,7, 9 P N [kw] I N [A] [kg] H [mm], (,), (,),7 (,), (,) 9 Hz r/min G / Hz r/min G / 7 [m] m/s m/s m/s m/s Ø [m] m/s m/s m/s m/s m/s Ø 9,,,,,,,,,,,,,,,,,,, P [kw],,,,,,, Ø,, Ø7 Ø7,,,,,,,,,,,,,,,,,,,,, Ø, Ø7,,,,,,,,,, 7 Ø Ø7,,,,,,,,,,,,,,7,,,,,,, P [kw] Ø7 Ø Ø,,,,,,,,,, 7 Ø Ø7,,,,,,,,,, Subject to change without prior notice.. / Subject to change without prior notice.

18 AE-/ AE-/ AEP-/ AEP-/ Hz Hz Motor V KH-7 N KH- C N Motor -V(-V) KH-7 N KH- C N P N [kw] I N [A] [kg] H [mm],, 9,,9 P N [kw] I N [A] [kg] H [mm], (,), (,) 9, (,),9 (,) Hz r/min G / Hz r/min G / [m] [m] m/s m/s m/s m/s m/s m/s m/s Ø Ø,,,,, P [kw] Ø Ø, 7 Ø Ø 7, Ø, Ø,,, Ø9, Ø,,, 7,,,,,,,, 7 P [kw] Ø Ø9 7 Ø Ø9 7 / Subject to change without prior notice.

19 L-A/ Hz Hz Motor V OP-7 B N OP-7 N Motor -V(-V) OP-7 B N OP-7 N OP-7 N P N [kw] I N [A] [kg] H [mm],,,,, P N [kw] I N [A] [kg] H [mm], (,), (,), (,9), (,),, (,), (,) 9 Hz r/min DN Hz r/min DN,,,,,, [m] m/s m/s m/s Ø,,,,,,,, [m] m/s m/s m/s m/s Ø,,,,,,,,,,,,, P [kw],,,,,,,,, Ø7 Ø7 Ø Ø,,, 7 Ø7 Ø,,,,,,,, P [kw],,,,,,,,,,,,9,,,,,,,,, Ø7 Ø7 Ø Ø,,,, 7 Ø7 Ø,,,, / Subject to change without prior notice.

20 L-A/ Hz Hz Motor V OP-7 N OKN- D N Motor -V(-V) OP-7 N OKN- D N KH-7 N P N [kw] I N [A] [kg] H [mm],,7 7,,7 7 P N [kw] I N [A] [kg] H [mm], (,),7 (,7) 7, (,7), (,) 7, (,), (,) 9 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s [m] Ø Ø,,, P [kw] Ø, Ø7,,,,,, Ø7 Ø7 Ø Ø 7,,,,,,, P [kw] Ø7 Ø 7,, 7,,,, Ø7 Ø7 Ø Ø 7 / Subject to change without prior notice.

21 ALS-/ Hz Hz Motor V OP-7 N OKN-L D N Motor -V(-V) OP-7 N OKN-L D N P N [kw] I N [A] [kg] H [mm],,,7, 9 P N [kw] I N [A] [kg] H [mm], (,), (,),7 (,), (,) 9 Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s m/s [m] m/s m/s m/s m/s m/s, Ø, Ø 7,,,,,,,,, P [kw], Ø, Ø7,,,,,,, Ø,,,, Ø7,,,,, 7 Ø Ø7,,,,,,,,,,, P [kw], Ø,, Ø7,,,,,,,, Ø,,, Ø7,,,,,, 7 Ø Ø7,,,,, Subject to change without prior notice 7.7. / Subject to change without prior notice. 7

22 ALS-/ Hz Hz Motor V KH-7 N KH- C N Motor -V(-V) KH-7 N KH- C N P N [kw] I N [A] [kg] H [mm],, 7 9,,9 9 P N [kw] I N [A] [kg] H [mm], (,), (,) 7 9, (,),9 (,) 9 Hz r/min DN Hz r/min DN m/s m/s m/s [m] [m] m/s m/s m/s m/s Ø Ø,,,,,,,, P [kw] Ø Ø Ø Ø, 7 Ø Ø 7,, 7,,,,,,,,,,,, P [kw] Ø Ø Ø Ø 7 7 Ø Ø 7 / Subject to change without prior notice.

23 ALS-/ Hz Hz Motor V OP-7 B N OP-7 N Motor -V(-V) OP-7 B N OP-7 N P N [kw] I N [A] [kg] H [mm],, 7,, P N [kw] I N [A] [kg] H [mm], (,), (,) 7, (,9), (,) Hz r/min DN Hz r/min DN [m] [m],, m/s m/s, m/s m/s, m/s, m/s m/s m/s, 7,, 9,,,, Ø,,, Ø 7,,,,,,,,,,,,,,,,,,,, P [kw], Ø7 Ø,,,,,,,,,,, Ø,,,, Ø7,,,,,,,,,, 7 Ø Ø7,,,,,,,,,,,,,,,,,,,, P [kw] Ø7 Ø9,,,,,,,,,,,,,,,,,,,,,,,,, 7 Ø7,,,,,,,,, Ø7 / Subject to change without prior notice. 9

24 ALS-/ Hz Hz Motor V OP-7 N OKN- D N Motor -V(-V) OP-7 N OKN- D N KH-7 N P N [kw] I N [A] [kg] H [mm],,7,,7 7 P N [kw] I N [A] [kg] H [mm], (,),7 (,7), (,7), (,) 7, (,), (,) 9 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s [m] Ø Ø,,,, 7 P [kw] Ø, Ø7, 7,,,,, Ø7 Ø, 7 Ø7 Ø,,9,, P [kw] Ø7 Ø, 7 P, [kw], Ø,,9,, Ø7, 7 Ø7 Ø / Subject to change without prior notice.

25 L-A/ Hz Hz Motor V OP-7 N OKN-L D N Motor -V(-V) OP-7 N OKN-L D N P N [kw] I N [A] [kg] H [mm],,,7, 9 P N [kw] I N [A] [kg] H [mm], (,), (,),7 (,), (,) 9 Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s Ø 9 m/s m/s m/s Ø [m],,,,,,,,,,,, P [kw], Ø, Ø7,,,,,,,,,, P, [kw], Ø,,,,,, Ø7,,,,,,,,,, Ø7 Ø,,,,,,,,,,,, P [kw] Ø, Ø7,,7,,,,,,, Ø7 Ø Ø7 Ø Subject to change without prior notice.. / Subject to change without prior notice. 9

26 L-A/ Hz Hz Motor V KH-7 N KH- C N Motor -V(-V) KH-7 N KH- C N P N [kw] I N [A] [kg] H [mm],, 9,,9 7 P N [kw] I N [A] [kg] H [mm], (,), (,) 9, (,),9 (,) 7 Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø P, [kw], Ø 7 P, [kw] Ø,,, Ø,, Ø,,, Ø, 7 Ø Ø,, Ø, 7 P, [kw] Ø,,, Ø,, 7 7 Ø Ø / Subject to change without prior notice.

27 L-A/ LP-A/ Hz Hz Motor V OP-7 F OP-7 F OKN- D F Motor -V(-V) OP-7 F OP-7 F OKN- D F KH- A F P N [kw] I N [A] [kg] H [mm],,,,,7, 7 P N [kw] I N [A] [kg] H [mm], (,), (,), (,), (,),7 (,), (,) 7, (,), (,) Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s Ø m/s m/s m/s Ø 7 [m] 9 7,,, P [kw] Ø, Ø, 7,,,,,,, Ø Ø 7 Ø Ø 7,7,,,,,,,,,,, P [kw] Ø Ø 7 Ø, Ø, 7 Ø Ø 7 / Subject to change without prior notice. 9

28 L-B/ LH-B/ LP-B/ Hz Hz Motor V KH-7 F Motor -V(-V) KH-7 F P N [kw] I N [A] [kg] H [mm],, P N [kw] I N [A] [kg] H [mm], (,), (,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s m/s m/s [m] Ø Ø,,,,,,,,,, P [kw] Ø9 Ø Ø9 Ø,,,,,,,,,,,, P [kw] Ø Ø9 Ø Ø9,, Ø Ø Ø9 Ø9 9 / Subject to change without prior notice.

29 L-D/ LH-D/ LP-D/ Hz Hz Motor V OKN-L D F Motor -V(-V) OKN-L D F KH- A F P N [kw] I N [A] [kg] H [mm],7, P N [kw] I N [A] [kg] H [mm],7 (,), (,), (,), (,) Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s Ø m/s m/s m/s Ø [m] 9 7,,, P [kw] Ø, Ø, 7,,,,,,, 7 Ø Ø 7 Ø Ø 7,,, P [kw] Ø, Ø, 7,,,, Ø Ø, Ø, 7 7 Ø Ø 7 / Subject to change without prior notice. 9

30 L-D/ LH-D/ LP-D/ Hz Hz Motor V KH- C F KH- D F KH- C F Motor -V(-V) KH- C F KH- D F KH- C F KH- E F P N [kw] I N [A] [kg] H [mm],,9,,, 9 P N [kw] I N [A] [kg] H [mm], (,),9 (,), (,), (,) (,), (,) 9 (,) 7,9 (,) Hz r/min DN Hz r/min DN m/s m/s m/s m/s m/s m/s m/s m/s m/s Q [m /h] P [kw] Ø Ø9, Ø,,, Ø9, 7 Ø Q [m /h] P [kw] Ø 7 7 Ø9 Ø Ø9 Ø Ø9 Ø9 9 / Subject to change without prior notice.

31 L-C/ LH-C/ LP-C/ Hz Hz Motor V KH- C F KH- D F Motor -V(-V) KH- C F KH- D F KH- C F KH- E F P N [kw] I N [A] [kg] H [mm],,9,, P N [kw] I N [A] [kg] H [mm], (,),9 (,), (,), (,) (,), (,) 9 (,) 7,9 (,) Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø,,,,, P [kw] Ø Ø,,,,,,,, 7 P [kw] Ø Ø Ø Ø P [kw] Ø Ø P [kw] Ø Ø 7 Ø Ø / Subject to change without prior notice. 97

32 L-S/ LH-S/ Hz Hz Motor V KH- C F9 KH- D F9 KH- C F9 KH- E F9 Motor -V(-V) KH- C F9 KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],,,,7,, 9 7, 9 7 P N [kw] I N [A] [kg] H [mm], (,), (,), (,), (,), (,), (,) 9 7 (,), (,) 9 7 (,),7 (,), (,), (,) Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø P [kw] Ø Ø Ø Ø Ø Ø Q [m /h] P [kw] Ø Ø P 7 [kw] Ø Ø Ø Ø 9 / Subject to change without prior notice.

33 L-S/ LH-S/ Hz Hz Motor V KH- C F9 KH- E F9 KZ- E F9 KZ- F F9 KZ-A H F9 Motor -V(-V) KH- C F9 KH- E F9 KZ- E F9 KZ- F F9 KZ-A H F9 P N [kw] I N [A] [kg] H [mm],, 7,,7,,9 9,, 9 P N [kw] I N [A] [kg] H [mm], (,), (,) 7, (9), (,) (), (,) (), (7,9) 9, (),9 (,) 9 Hz r/min DN Hz r/min DN 9 7 [m] m/s m/s m/s m/s [m] m/s m/s m/s m/s Ø Ø P [kw] Ø Ø Ø Ø 7 Ø Ø 7 P [kw] Ø Ø P [kw] Ø Ø 7 Ø Ø / Subject to change without prior notice. 99

34 L-A/ LH-A/ Hz Hz Motor V OKN- D F9 OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 Motor -V(-V) OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],,7 7,7 7,,7,7,7,, 7,,7 7 P N [kw] I N [A] [kg] H [mm],7 (,) () 7, (,), (,),7 (,9),7 (,7), (,), (,) 7, (,), (,) 7, (,), (,) (,), (,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s [m] m/s m/s m/s 9 m/s Ø 7 Ø Ø Ø,,7, P [kw], Ø Q [m /h],, Ø Ø,,,, Ø,, Ø,,,7,,,, Ø, Ø,,,,,, P [kw] Ø Ø Ø Ø Ø Subject to change without prior notice.9. / Subject to change without prior notice.

35 L-B/ LH-B/ LS-B/ Hz Hz Motor V KH- C F9 KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- C F9 KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],,9 7,, 7,,, 7,9,, 7 7 7,,7 9 7 P N [kw] I N [A] [kg] H [mm], (,),9 (,) 7, (,), (,) 7 (,), (,) (,) 7,9 (,), (,), (,) 7 7 7, (9), (,) 9 7 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s Ø 7 [m] m/s m/s m/s m/s m/s Ø Ø Ø 7 P [kw] Ø Ø Ø Ø 7 Ø Ø 7 P [kw] Ø Ø 7 Ø Ø Ø Ø7 Subject to change without prior notice.. / Subject to change without prior notice.

36 ALP-/ Hz Hz Motor V OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 Motor -V(-V) OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],7, 7,,7,7,7,, 7,,7 7 P N [kw] I N [A] [kg] H [mm],7 (,) () 7, (,), (,),7 (,9),7 (,7), (,), (,) 7, (,), (,) 7, (,), (,) (,), (,) Hz r/min DN Hz r/min DN m/s m/s m/s Ø [m] [m] m/s m/s m/s m/s Ø Q [m/h],,,,,,,,,,,,,,,,,, 7 P [kw] Ø Ø P [kw] Ø Ø Ø Ø,,,, P [kw] Ø Q [m/h], Ø,,,,,,,, 7 P [kw] Ø Ø Ø Ø Subject to change without prior notice / Subject to change without prior notice.

37 ALP-/ Hz Hz Motor V KH- C F9 KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],,9 7,, 7, 7,9,, 7 7,,7 9 7 P N [kw] I N [A] [kg] H [mm], (,), (,) 7 (,), (,) (,) 7,9 (,), (,), (,) 7 7, (9), (,) 9 7 Hz r/min DN Hz r/min DN m/s m/s m/s m/s m/s Ø [m] 7 [m] m/s m/s m/s m/s m/s Ø P [kw] Ø Ø Ø Ø Ø Ø P [kw] Ø Ø 7 Ø Ø Ø Ø7 Subject to change without prior notice 7.9. / Subject to change without prior notice.

38 L-A/ LH-A/ Hz Hz Motor V OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 KH- E F9 Motor -V(-V) KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],7,,,7,7,7,, 7,,7 7,,, P N [kw] I N [A] [kg] H [mm], (,),7 (,),7 (,9),7 (,7), (,), (,) 7, (,), (,) 7, (,), (,) (,), (,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s Ø [m] m/s m/s m/s m/s Ø Ø P [kw],, Ø,,,,, Ø,,,,,,,,,,, 7 Ø Ø,,,, Ø P [kw] Ø, Ø,, Ø,,,,, Ø, Ø Ø Ø Ø 7 Subject to change without prior notice.9. / Subject to change without prior notice.

39 L-A/ LH-A/ Hz Hz Motor V KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- C F9 KH- E F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],, 7, 7,9,, 7,,7 9 P N [kw] I N [A] [kg] H [mm] (,), (,) (,) 7,9 (,), (,), (,) 7, (9), (,) 9 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s Ø [m] m/s m/s m/s m/s m/s Ø Ø Ø P [kw] Ø Ø Ø Ø 7 Ø Ø P [kw] Ø Ø 7 Ø Ø Ø Ø7 / Subject to change without prior notice.

40 ALS-/ Hz Hz Motor V OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 Motor -V(-V) OKN- D F9 KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],7,,,7,7,7,, 7,,7 7 P N [kw] I N [A] [kg] H [mm],7 (,), (,), (,),7 (,9), (,),7 (,7), (,), (,) 7, (,), (,) 7, (,), (,) (,), (,) Hz r/min DN Hz r/min DN m/s m/s m/s [m] [m] 9 m/s m/s m/s m/s Ø 7 Ø,,,,, 7 P [kw] Ø Ø, Ø, 7 Ø Ø 7,,,, Ø, Ø,,,,,,,,,, P [kw] Ø Ø Ø 7 Ø Ø / Subject to change without prior notice.

41 ALS-/ Hz Hz Motor V KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- C F9 KH- E F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],, 7, 7,9,, 9 7,,7 99 P N [kw] I N [A] [kg] H [mm] (,), (,) (,) 7,9 (,), (,), (,) 9 7, (9), (,) 99 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s Ø [m] m/s m/s m/s m/s m/s m/s Ø P [kw] Ø Ø 7 Ø Ø Ø Ø P [kw] Ø Ø 7 Ø Ø Ø Ø / Subject to change without prior notice. 7

42 L-S/ LH-S/ Hz Hz Motor V KH- C F9 KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- D F9 KH- C F9 KH- E F9 KH- C F9 KH- E F9 KH- G F9 P N [kw] I N [A] [kg] H [mm],,,,7 9,, 9 7, 99 7,,,9 P N [kw] I N [A] [kg] H [mm], (,), (,) 9, (,), (,) 9 7 (,), (,) 99 7 (,),7 (,), (,), (,) 7, (9), (,7) 7 7 Hz r/min DN Hz r/min DN Ø7 m/s m/s m/s m/s Ø7 [m] 7 7 P [kw] Ø7 Ø7 Ø7 Ø7 Ø7 Ø7 [m] m/s m/s m/s m/s m/s Ø9 Ø7 P [kw] Ø7 Ø7 9 Ø7 Ø7 7 Ø7 Ø7 Subject to change without prior notice / Subject to change without prior notice.

43 L-S/ LH-S/ Hz Hz Motor V KH- E F9 KZ- E F9 KZ- F F9 KZ-A H F9 Motor -V(-V) KH- E F9 KZ- E F9 KZ- F F9 KZ-A H F9 P N [kw] I N [A] [kg] H [mm] 7,,7,,9 9,, 9 P N [kw] I N [A] [kg] H [mm] 7, (9), (,) (), (,) (), (7,9) 9, (),9 (,) 9 Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s m/s m/s 7, Ø, 9 7 [m] m/s m/s m/s m/s m/s, Ø 7,, 7, 7,,, P [kw] Ø Ø7 P [kw] Ø Ø7 P [kw] Ø Ø7 Ø Ø7 7 Ø Ø7 7 Ø9 Ø7 / Subject to change without prior notice. 9

44 AL-/ ALH-/ ALP-/ ALS-/ Hz Hz Motor V KH- A F9 KH- B F9 KH- C F9 KH- D F9 KH- C F9 Motor -V(-V) KH- C F9 KH- D F9 KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm],,7,7,7,,,,7,, 9 P N [kw] I N [A] [kg] H [mm], (,), (,), (,), (,), (,), (,) 9 (,), (,) 7 Hz r/min DN Hz r/min DN m/s m/s m/s [m] [m] 9 m/s m/s m/s m/s Ø 7 Ø,,,, P [kw] Ø, Ø,,,,,,,, 7 Ø Ø Ø Ø P [kw] Ø Ø Ø Ø 7 Ø Ø / Subject to change without prior notice.

45 AL-/ ALH-/ ALP-/ ALS-/ Hz Hz Motor V KH- E F9 KH- C F9 KH- E F9 Motor -V(-V) KH- C F9 KH- E F9 P N [kw] I N [A] [kg] H [mm] 7,9 7,, 9 9 7,,7 9 P N [kw] I N [A] [kg] H [mm], (,), (,) 9 9 7, (9), (,) 9 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s m/s m/s [m] Ø9 Ø Q [m /h] P [kw] Ø Ø9 9 Ø9 7 Ø 7 Ø Ø9 Q [m /h] 7 P [kw] Ø Ø Ø Ø Ø Ø / Subject to change without prior notice.

46 AKN-/ AKNH-/ Hz Hz Motor V KH- D N KH- C N KH- E N Motor -V(-V) KH- D N KH- C N KH- E N P N [kw] I N [A] [kg] H [mm],,7,, 9, 9 P N [kw] I N [A] [kg] H [mm], (,), (,), (,), (,) 9 (,), (,) 9 Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø9 9 P [kw],, Ø,,,, Ø, Ø Ø 7 Ø Ø P [kw] Ø9 Ø Ø Ø9 7 Ø Ø9 / Subject to change without prior notice.

47 AKN-/ AKNH-/ Hz Hz Motor V KH- E N KZ- E N KZ- F N KZ-A H N KZ- J N Motor -V(-V) KZ- E N KZ- F N KZ-A H N KZ- J N P N [kw] I N [A] [kg] H [mm] 7,,7,,9 9,,, 7 P N [kw] I N [A] [kg] H [mm] (), (,) (), (7,9) 9, (),9 (,) (), (9,) 7 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s Ø 7 m/s m/s m/s [m] Ø P [kw] Ø Ø Ø Ø 7 Ø Ø 7 P [kw] Ø9 Ø Ø9 Ø Ø Ø / Subject to change without prior notice.

48 AL-/ ALH-/ ALS-/ Hz Hz Motor V KH- E F KH- C F KH- E F KH- G F Motor -V(-V) KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF P N [kw] I N [A] [kg] H [mm],, 9,,9 9 7,, 7 P N [kw] I N [A] [kg] H [mm] (,), (,) (,),7 (,) 9, (,), (,) 9 7, (9), (,7) 7 (), (,) () 9, (,7), (), (,) 7 7 Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø 9 9 P [kw] Ø Ø 9 Ø 7 Ø 7 Ø Ø Q [m /h] P [kw] Ø Ø Ø Ø 7 Ø Ø / Subject to change without prior notice.

49 L-S/ LH-S/ LP-S/ Hz Hz Motor V KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F Motor -V(-V) KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF KZ- K BF P N [kw] I N [A] [kg] H [mm],,,,9 7 7,,,7 7, 7 P N [kw] I N [A] [kg] H [mm] (,) (,), (,),7 (,), (,), (,) 7 7, (9), (,7) (), (,) 7 () 9, (,7) 7, (), (,) 9 7 (), (,) 7 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s Ø m/s m/s m/s m/s m/s [m] Ø, 7,, Ø, Ø Q [m /h] P [kw] P [kw] Ø Ø Ø Ø Ø Ø Ø Ø 7 7 Ø Ø Ø Ø 7, Subject to change without prior notice 9.7. / Subject to change without prior notice.

50 L-S/ LH-S/ LP-S/ Hz Hz Motor V KZ- F F KZ-A H F KZ- J BF KZ- H F KZ- J F KZ- H F Motor -V(-V) KZ- F F KZ-A H F KZ- J BF KZ- H F KZ- J F KZ- H F P N [kw] I N [A] [kg] H [mm],9 7,, 7, 9 7, 7 7, 7 77,7 P N [kw] I N [A] [kg] H [mm] (), (7,9) 7, (),9 (,) 7 (), (9,) 9 7 (), (,) 7 7 (), (,) 7 (), (,) Hz r/min DN Hz r/min DN 7 [m] m/s m/s m/s m/s Ø7 m/s m/s m/s m/s Ø [m] Ø Ø 7 P [kw] Ø Ø7 7 7 Ø Ø7 7 Ø Ø P [kw] Ø Ø 7 Ø Ø 7 Ø Ø 7 Subject to change without prior notice / Subject to change without prior notice.

51 AKN-7/ AKNH-7/ Hz Hz Motor V KH- C N7 KH- E N7 Motor -V(-V) KH- C N7 KH- E N7 KH- G N7 KZ- F N7 P N [kw] I N [A] [kg] H [mm], 7, P N [kw],9 I N [A] [kg] 7 H [mm] (,),7 (,) 7, (,), (,) 7 7, (9), (,7) 7 (), (,) 7 Hz r/min DN Hz r/min DN m/s m/s m/s Ø [m] P [kw] Ø Ø Ø Ø Ø Ø [m] m/s m/s m/s m/s Ø P [kw] Ø Ø Ø Ø 7 Ø Ø / Subject to change without prior notice. 7

52 AKN-7/ AKNH-7/ Hz Hz Motor V KZ- E N7 KZ- F N7 KZ-A H N7 KZ- J N7 Motor -V(-V) KZ- F N7 KZ-A H N7 KZ- J N7 P N [kw] I N [A] [kg] H [mm],,9,,, 7 P N [kw] I N [A] [kg] H [mm] (), (7,9), (),9 (,) (), (9,) 7 Hz r/min DN Hz r/min DN m/s m/s m/s m/s [m] Ø9 9 [m] m/s m/s m/s m/s m/s 7 Ø P [kw] Ø Ø Ø Ø 7 Ø Ø 7 P [kw] 7 Ø Ø 7 Ø Ø 7 Ø Ø 7 / Subject to change without prior notice.

53 AL-9/ ALH-9/ ALS-9/ ALM-9/ Hz Hz Motor V KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F Motor -V(-V) KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF KZ- K BF P N [kw] I N [A] [kg] H [mm],,,,9 7 7,,,7, P N [kw] I N [A] [kg] H [mm] (,),7 (,), (,), (,) 7 7, (9), (,7) (), (,) () 9, (,7), (), (,) 7 (), (,) 9 7 Hz r/min DN Hz r/min DN [m] [m] m/s m/s m/s m/s m/s m/s m/s m/s m/s Ø Ø 7 P [kw] Ø7 Ø Ø7 Ø Ø7 Ø 7 P [kw] Ø Ø7 7 7 Ø7 Ø 7 Ø7 Ø 7 Subject to change without prior notice 9.7. / Subject to change without prior notice. 9

54 AL-9/ ALH-9/ ALS-9/ ALM-9/ Hz Motor V KZ- H F KZ- J F P N [kw] I N [A] [kg] H [mm], 77 7, 77 Hz r/min DN 7 [m] m/s m/s m/s m/s m/s m/s Ø 7 P [kw] Ø Ø 7 Ø Ø 7 7 Ø Ø 7 / Subject to change without prior notice.

55 ALP-/ Hz Hz Motor V KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F Motor -V(-V) KH- E F KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF KZ- K BF P N [kw] I N [A] [kg] H [mm],,,,9 7 7,,,7, P N [kw] I N [A] [kg] H [mm] (,), (,) (,),7 (,), (,), (,) 7 7, (9), (,7) (), (,) () 9, (,7), (), (,) 7 (), (,) 9 7 Hz r/min DN Hz r/min DN m/s m/s m/s m/s [m] [m] m/s m/s m/s m/s m/s Ø Ø 7 P [kw] Ø7 Ø Ø7 Ø Ø7 Ø 7 P [kw] Ø Ø7 7 Ø Ø7 7 7 Ø7 Ø 7 / Subject to change without prior notice.

56 ALP-/ Hz Motor V KZ- H F KZ- J F P N [kw] I N [A] [kg] H [mm], 77 7, 77 Hz 7 r/min DN [m] m/s m/s m/s m/s m/s m/s Ø 7 P [kw] Ø Ø 7 Ø Ø 7 7 Ø Ø 7 / Subject to change without prior notice.

57 L-S/ LH-S/ LS-S/ Hz Hz Motor V KZ- G F KZ- K F KZ- K F KZ- J F KZ- K F Motor -V(-V) KZ- G F KZ- K F KZ- K F KZ- J F KZ- K F KZ- J F P N [kw] I N [A] [kg] H [mm],, 7, 7, 7 7,, P N [kw] I N [A] [kg] H [mm], (), (,) 7 (), (,) 7 () 7, (7,) 7 () 9, (,) (), (,) (), (,9) 7 7 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s Ø 9 7 m/s m/s m/s Ø [m] Ø 7 P [kw] Ø Ø Q [m/h] Q [m/h] P [kw] Ø Ø 7 9 P [kw] Ø Ø 7 7 P [kw] Ø Ø Ø Ø 7 7 Ø Ø Subject to change without prior notice.7. / Subject to change without prior notice.

58 ALP-/ Hz Hz Motor V KH- G F Motor -V(-V) KH- G F KZ- G F KZ- G F P N [kw] I N [A] [kg] H [mm],, P N [kw] I N [A] [kg] H [mm], (,), (,) 7, (9), (7,) (),9 (,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s Ø9 m/s m/s m/s [m] Ø9 7 P [kw] Ø Ø9 Ø Ø9 Ø Ø9 7 Q [m/h] P [kw] Ø Ø9 7 7 Ø Ø9 7 Ø Ø9 7 / Subject to change without prior notice.

59 ALP-/ Hz Hz Motor V KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF Motor -V(-V) KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF KZ- K BF KZ- K F P N [kw] I N [A] [kg] H [mm], 77,,9 7,, 9,7,,, 9 7 P N [kw] I N [A] [kg] H [mm] (,),7 (,) 77, (,), (,) 7, (9), (,7) 9 (), (,) () 9, (,7), (), (,) 9 7 (), (,) 7 () 7, (7,) 7 7 Hz r/min DN Hz r/min DN m/s m/s m/s m/s Ø9 [m] m/s m/s m/s m/s m/s Ø9 [m] 7 9 P [kw] Ø9 Ø 7 9 Ø Ø Ø Ø P [kw] Ø Ø9 7 9 Ø Ø9 7 9 Ø Ø9 7 9 / Subject to change without prior notice.

60 AL-/ ALH-/ ALS-/ ALM-/ Hz Hz Motor V KH- G F Motor -V(-V) KH- G F KZ- G F KZ- G F P N [kw] I N [A] [kg] H [mm],, P N [kw] I N [A] [kg] H [mm], (,), (,) 7, (9), (7,) (),9 (,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s Ø9 m/s m/s m/s [m] Ø9 7 P [kw] Ø Ø9 Ø Ø9 Ø Ø9 7 Ø Ø9 7 7 P [kw] Ø Ø9 7 Ø Ø9 7 / Subject to change without prior notice.

61 AL-/ ALH-/ ALS-/ ALM-/ Hz Hz Motor V KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF Motor -V(-V) KH- C F KH- E F KH- G F KZ- F F KZ- G F KZ- G BF KZ- K BF KZ- K F P N [kw] I N [A] [kg] H [mm], 77,,9 7,, 9,7,,, 9 7 P N [kw] I N [A] [kg] H [mm] (,),7 (,) 77, (,), (,) 7, (9), (,7) 9 (), (,) () 9, (,7), (), (,) 9 7 (), (,) 7 () 7, (7,) 7 7 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s Ø9 m/s m/s m/s m/s m/s [m] Ø9 7 9 P [kw] Ø9 Ø 7 9 Ø Ø Ø Ø P [kw] Ø Ø9 7 9 Ø Ø9 7 9 Ø Ø9 7 9 / Subject to change without prior notice. 7

62 AL-/ ALH-/ ALP-/ ALS-/ ALM-/ Hz Hz Motor V KH- G F KH- G F KZ- G F KZ- G F Motor -V(-V) KH- G F KH- G F KZ- G F KZ- G F KZ- G F KZ- G F P N [kw] I N [A] [kg] H [mm], 7,, 7 7, 7,7 7, 7 P N [kw] I N [A] [kg] H [mm] (,) 9,9 (,) 7, (,), (,) 7 7, (9), (7,) 7 (), (,) 7 (,), (,), () 7, (,) Hz r/min DN Hz r/min DN m/s m/s m/s m/s m/s m/s m/s 7 P [kw] Ø Ø Ø Ø Ø Ø Q [m /h] P [kw] Ø Ø 7 Ø Ø Ø Ø / Subject to change without prior notice.

63 AL-/ ALH-/ ALP-/ ALS-/ ALM-/ Hz Hz Motor V KZ- G F KZ- G BF KZ- K BF KZ- K F KZ- J F Motor -V(-V) KZ- G BF KZ- K BF KZ- K F KZ- J F KZ- K F P N [kw] I N [A] [kg] H [mm], 7,, 7, 7, 7 7, P N [kw] I N [A] [kg] H [mm], (), (,) 7 (), (,) 7 () 7, (7,) 7 () 9, (,) (), (,) Hz r/min DN Hz r/min DN m/s m/s m/s m/s [m] Ø m/s m/s m/s m/s m/s Ø [m] P [kw] Ø Ø Ø Ø 7 Ø Ø P [kw] Ø Ø Ø Ø Ø Ø Ø / Subject to change without prior notice. 9

64 AL-/ ALH-/ ALP-/ ALS-/ Hz Hz Motor V KZ- G F KZ- G F KZ- H F KZ- G F Motor -V(-V) KZ- G F KZ- H F KZ- G F P N [kw] I N [A] [kg] 9,7,,,, P N [kw] I N [A] [kg], () 7, (,) (), (,) (), (7,) H [mm] 9 H [mm] 9 Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s m/s [m] Ø Ø P [kw] Ø Ø Ø Ø 7 Ø Ø 7 7 P [kw] Ø Ø P [kw] Ø Ø Ø Ø / Subject to change without prior notice.

65 AL-/ ALH-/ ALP-/ ALS-/ ALM-/ Hz Hz Motor V KZ- J F KZ- K F KZ- J F KZ-7 J F KZ- K F KZR- H F Motor -V(-V) KZ- K F KZ- J F KZ-7 J F KZ- K F KZR- H F P N [kw] I N [A] [kg] H [mm] 7 7,, 9 9, ,9 9, 9 7 9, P N [kw] () I N [A], (,) [kg] H [mm] 9 (), (,9) (9), (9,) 9 (), (9,) 9 7 () 99,9 (9,) Hz r/min DN Hz r/min DN [m] m/s m/s m/s m/s m/s Ø9 7 9 P [kw] Ø Ø Ø Ø 9 7 Ø9 Ø 7 [m] m/s m/s m/s m/s m/s Ø P [kw] Ø Ø Ø Ø 9 7 Ø Ø / Subject to change without prior notice.

66 AL-/ ALH-/ ALS-/ Hz Hz Motor V KZR- H F KZR- J F KZR- K F Motor -V(-V) KZR- H F KZR- J F KZR- K F P N [kw] I N [A] [kg] H [mm] 9, 7, ,7 7 P N [kw] I N [A] [kg] H [mm] () 99,9 (9,) 7 (), (,) 9 7 (9) 9, (7,) 7 Hz r/min DN Hz r/min DN 9 7 [m] m/s m/s m/s m/s Ø 9 7 m/s m/s m/s Ø [m] Ø P [kw] Ø Ø Ø Ø 7 Ø Ø P [kw] Ø Ø 7 Ø Ø Ø Ø / Subject to change without prior notice.