CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC. Instant Self Tanning Spray. International Beauty Supplies

Transcription

1 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY Product name Product code Product use Company Address St.Tropez Bronzing Spray STAD200 Instant Self Tanning Spray International Beauty Supplies 6E Narabang Way, Belrose NSW, Australia 2085 Telephone number (02) Fax number (02) EMERGENCY TELEPHONE NUMBER Bill McKendrick Managing Director (BH) (02) (AH) HAZARDS IDENTIFICATION If ingested may cause some irritation to the mouth and upper digestive tract. Irritant to skin, eyes, central nervous system depressant Classified as hazardous according to criteria of NOHSC. Classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. Classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations Aerosol Container classified as Extremely Flammable

2 3. COMPOSITION / INFORMATION ON INGREDIENTS Dimethyl Ether Water (Aqua) Alcohol Denat Dihydroxyacetone Polysorbate 20 Propylene Glycol PPG-5-Ceteth-20 Parfum (Fragrance) Aloe Barbadensis Leaf Juice Extract Erythrulose Sodium PCA Lactic Acid Butylphenyl Methylpropional Benzyl Salicylate Linalool Hydroxyisohexyl 3-Cyclohexene Carboxaldehyde Retinyl Palmitate Geraniol Citronellol Hexyl Cinnamal Cinnamyl Alcohol Eugenol Hydroxycitronellal Alpha-Isomethyl Ianone Potassium Sorbate Sodium Benzoate BHT BHA Citric Acid Red 4 (Cl 147oo Yellow 5 (Cl 19140) Blue 1 (Cl 42090)

3 4. FIRST AID MEASURES Route of exposure - Inhalation Remove victim to fresh air at once. If breathing is difficult, seek medical attention. - Ingestion DO NOT INDUCE VOMITING. Drink enough water to dilute. Consult physician immediately. - Eye Contact Flush eyes with plenty of water to ensure complete flushing. If irritation persists, seek medical attention. - Skin Contact Wash thoroughly with mild soap and water. If irritation persists seek medical attention. - First aid facilities - Advice to doctor 5. FIRE-FIGHTING MEASURES Specific hazards Fumes contain carbon dioxide, carbon monoxide and oxides of nitrogen may be formed in large fires In case of fire use powder, foam, sand, water spray. Avoid using large quantities of water. In case of fire, cool the stored aerosol cans with water spray. In case of fire, self contained breathing apparatus should be warn. 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment. Environmental precautions: Not completely biodegradable Discharge of large quantities into the aquatic environment may kill fish and other aquatic organisms. Dispose of properly in accordance with local, state and federal regulations. Methods for cleaning up:

4 Contain and collect spillage. Extinguish any naked flames and remove any sources of ignition. Absorb on to sand/kieselguhr or other inert material. For Spillages involving a large number of units, operators should wear suitable protective clothing such as gloves, overalls and eye protection during the clearing up operation. May make floor very slippery. Do not wash into the drains. Place in plastic barrels for disposal. Do not mix with any other waste material. Dispose of in accordance with State and local authority regulations. 7. HANDLING AND STORAGE Handling Avoid eye contact Storage Keep away from sources of ignition. Use and store in a cool, dry, well-ventilated location (e.g., local exhaust ventilation, fans). Do not store in damaged or unmarked containers or storage devices. Keep containers securely closed when not in use. Other information Spilled material may present a slipping hazard if left unattended. Clean all spills promptly. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Avoid contact with eyes, skin or clothes, do not inhale spray. Working procedures should be designed to minimize worker exposure to the product. Exposure limits Ethanol 8hr TWA 1900mg/mˉ³ Dimethyl Ether: OEL (UK) LTEL [ppm]: 400 Dimethylether: OEL (UK)-STEL [ppm]: 500 Dimethylether: MAK-Germany [ppm]: 1000

5 9. PHYSICAL AND CHEMICL PROPERTIES Appearance An aerosol product 10. STABILITY AND REACTIVITY Chemical stability Conditions to avoid Hazardous decomposition products volatile components. May react with strong oxidants Open flames, sparks, high heat and direct sunlight Decomposition can occur above 100 C after loss of any 11. TOXICOLOGICAL INFORMATION Toxicology data The product has not been tested for specific toxicity data Acute health hazards Ingestion Inhalation Skin Contact Eye Contact Chronic Health Hazards None known 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Mobility Do not release into surface waters Not completely biodegradable There is no specific data available for this product

6 13. DISPOSAL CONSIDERATIONS When disposing of waste or surplus material avoid contact with the eye and skin. Do not wash into the drains. Single units may be disposed of with other household refuse. For larger quantities seek advice from the local waste authority or seek advice from Swallowfield Plc. 14. TRANSPORT INFORMATION This product is classified as Dangerous for Transport but can be shipped under the limited quantities provided. It should be labeled Aerosols UN REGULATORY INFORMATION This product is regulated under The Cosmetics (Safety) Regulations 2008 and Aerosol Directive 94/1/EC and under these regulations should be labeled as:- Extremely Flammable Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50 C. Do not pierce or burn even after use. Keep away from sources of ignition No Smoking. Keep out of reach of children. 16. OTHER INFORMATION Initial preparation date Amendment date Reasons for change The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.end of MSDS.