COLOUR System. The right colour, for every room.
|
|
- Angela Morton
- 7 years ago
- Views:
Transcription
1 The right colour, for every room.
2 A simple and complete guide. Simple and complete: these are the pillars of the Fassa Bortolo Colour System. For this reason we have developed this guide as an extra tool for paint professionals, who can find all the information they need in order to use the various systems correctly. For every System we provide the application cycles for the products that they are comprised of, the main characteristics and the technical specifications of each product. Key Paintable with ColorLife Tinting System European Technical Approval (ETA) The European Technical Approvals ETA 07/0280 and ETA 09/0282 which represent the positive technical evaluation of suitability for use of the products, based on the compliance and observance of all requirements set forth by the ETAG 004 Guideline. VOC Standard All of the products in the Fassa Bortolo Colour System comply with the parameters set forth by European Union standards, designed to limit the emissions of organic compounds; they comply particularly with Italian Legislative Decree No. 161 of 27/03/2006 (Implementation of Directive 2004/42/EC) which identifies the maximum Volatile Organic Compound content (VOCs) in paints and finish coat plasters in paste form. Table of contents Our view of the world is in the colour. p. 4 The simplest choice is the most effective. p. 6 We consider research an essential element. p. 8 Fassa Bortolo ColorLife Tinting System. p. 10 2
3 The Systems SILICONE RESIN p. 12 ACRYLIC DECORLIME p. 50 FS 412 Primer for silicone resin coating cycles p. 14 F 482I Filling undercoat with fine plaster appearance p. 14 PS 403 Highly breathable finish p. 15 SKIN 432 Protective siloxane finish p. 15 RSR 421 Silicone resin finish coat plaster with rustic effect p. 15 Application cycles p. 16 ACRYLIC-SILOXANE p. 20 FX 526 Universal pigmented primer undercoat p. 22 PX 505 Acrylic-siloxane filling finish p. 22 RX 561 Rustic acrylic-siloxane finish coat plaster p. 23 Application cycles p. 24 ACRYLIC p. 26 FA 249 Primer for acrylic systems p. 28 F 263A Filling undercoat with fine plaster appearance for exteriors and interiors p. 28 LV 207 Scrub resistant water-based paint with velvet finish p. 29 Gypsopaint Water-based paint for plasterboard p. 29 PL 215 Wash-resistant water-based paint p. 29 PT 213 Water-based paint with excellent coverage p. 30 PI 209 Universal water-based paint p. 30 PM 298 Professional breathable water-based paint p. 30 P 200 Water-based paint for walls p. 31 PB 260 HYGIENE Water-based paint with increased mould resistance p. 31 AM 270 Renovation solution for interiors p. 31 PG 288 PROTECT Smooth scrub resistant matt finish p. 32 C 285 BETON Protective finish for concrete p. 32 PA 202 ACTIVE Protective filling finish p. 32 MR 287 Water-based paint for exteriors with high filling properties p. 33 OM 306 Homogeniser for mineral finish coat plasters p. 33 RTA 549 Acrylic finish coat plaster for thermal insulated walls p. 34 RAR 256 Rustic acrylic finish coat plaster p. 34 Application cycles p. 36 SILICATE p. 44 FASSIL F 328 Silicate primer p. 46 FASSIL F 357S Filling undercoat with fine plaster appearance for exteriors and interiors p. 46 FASSIL P 313 Smooth silicate water-based paint p. 47 FASSIL R 336 Silicate finish coat plaster with rustic effect p. 47 Application cycles p. 48 PC 144 Decorative mineral lime-based finish p. 52 I 133 Mineral fine-grained lime-based plaster for decorative products p. 52 LS 122 Mineral-based smoothing with satin finish p. 52 RC 155 Decorative smoothing for interiors p. 53 SD 111 Decorative gloss mineral putty for interiors p. 53 ELASTOMER p. 54 FOND-ELAST 223 Elastomer evening undercoat with fine mortar appearance p. 56 PE 224 ELAST Elastomer filling finish p. 56 RI-ELAST 225 Elastomer finish coat plaster with rustic appearance p. 57 Application cycles p. 58 COMPLEMENTARY PRODUCTS p. 60 SOL-FIX 211 Solvent-based acrylic primer p. 62 IS 510 Siloxane water repellent p. 62 FAST 299 Filling paste p. 62 AM 270 Renovation solution for interiors p. 63 AC 241 Synthetic resin-based adhesion promoter p. 63 3
4 4 COLOUR System
5 Our view of the world is in the colour. Colours help us live better. They express our personality, they define our spaces. They can be warm, soft, pastel, bright, relaxing. If we use them in the spaces we live in, it is essential that they be natural. They let walls breathe, providing dry, healthy and comfortable living spaces. Fassa colours fully satisfy all of these requirements, because they are made from select materials. To let us, the buildings that house us and even the environment we live in, to live better. 5
6 6 COLOUR System
7 The simplest choice is the most effective. Whatever your need, the Fassa Bortolo Colour System is always the right choice. Because it includes technical solutions, and decorative solutions, for interiors and exteriors. And it is also the simplest choice, because everything is easier with Fassa Bortolo Colour System. Choose the right finishing product, immediately identify the intended use, know what binding agent it contains. It's all there in black and white, on every package. The colour of every package defines the intended use: undercoats, finish coat paints for interiors and exteriors finish coat plasters, decorative finishes, while binding systems are identified with letters of the alphabet. This saves you time, by choosing the right product for every need, for exteriors as well as interiors. With the same quality guaranteed by all Fassa Bortolo products. The letter identifies the type of binding agent The colour corresponds to the intended use undercoat Finish coat paint for interiors Finish coat paint for exteriors finish coat plaster decorative finish SILICONE RESIN ACRYLIC-SILOXANE ACRYLIC SILICATE DECORLIME ELASTOMER 7
8 Spresiano (TV): paint factory 8
9 We consider research an essential element. We do research, to produce quality. We find the most technologically innovative solutions, thanks to the constant commitment of our Research Centre, to broaden the horizons of our production. Investing in research is essential for any company that wants to constantly improve its results. That is why we created our own Research Centre, an advanced laboratory with a wide range of appliances and equipment. To analyse the material at a microscopic level and to evaluate the physico-chemical characteristics, in order to select formulations that guarantee the quality of products and predict, through specific tests, the behaviour in the most diverse environmental conditions. Our daily focus on research has also led us to achieve an important recognition, ISO 9001:2008 certification. Providing us with additional proof of the superior quality that we offer the building industry in this field as well. Not to mention the fully automated paint factory, where all of our energies are focused on constantly increasing the quality of our products and guaranteeing scheduled delivery times. To guarantee the best, always. X-Ray difractometer Spresiano (TV): Research Centre 9
10 10 COLOUR System
11 Fassa Bortolo ColorLife Tinting System The experience we have gained in the paint industry (fifteen years ago the first professional Fassa Bortolo tinting system was set up) has allowed us to build a new, evolved tinting system. Today, with the new ColorLife Tinting System, with the addition of 6 new organic colouring pastes for interiors, customers can choose the precise shade of colour, from among 1950 reproducible hues. ColorLife is based on NCS (Natural Color System ), the most widespread and commonly-used colour model in the world by material manufacturing companies, architects, designers, which codes colours according to how they are perceived by the human eye. A total of 1950 colour cards which, summed with 228 Fassa colour swatches, make the Colour System the most complete solution for every type of project. An assortment of 228 high quality hues. Modern, classic and pastel hues. 11
12 Very high protection Water-repellent Breathable IMPROVED mouldresistance For external thermal insulation systems For rising damp wall renovation systems 12
13 SILICONE RESIN The top of the line. Superior performance: high water-repellent properties, vapour permeability, excellent, long-lasting protection. The combination of these features makes Silicone Resin System products particularly suitable for decorating renovation base coat plasters on FASSATHERM external thermal insulation composite systems and wherever long-lasting protection is required. FS 412 Primer for silicone resin coating cycles p. 14 F 482I Filling undercoat with fine plaster appearance p. 14 PS 403 Highly breathable finish p. 15 SKIN 432 Protective siloxane finish p. 15 RSR 421 Silicone resin finish coat plaster with rustic effect p
14 SILICONE RESIN UNDERCOAT FS 412 FS 412 Primer for silicone resin coating cycles FS 412 is a water-based primer used as an insulating agent, a primer or stabiliser of the wall before applying Silicone resin system finishing products, without altering the breathability of the wall. Specific for silicone resin cycles Water-repellent primer Specific weight: 1.00 kg/l approx. Dilution in weight: 1 part FS 412 with 1 part water Yield: approx. 7-9 m 2 /l Package: 16 litres Colour: transparent F 482I F 482I Filling undercoat with fine plaster appearance F 482I is a white filling undercoat, particularly suited to even out minor imperfections, providing a fine plaster appearance. The nature of the raw materials it contains makes the product suitable whenever there is a need for high breathability, low water absorption and high final yield. Evening structural base Fine grading: 0.5 mm Easy application Specific weight: 1.67 kg/l approx. Dilution, in weight, with water: 5-7% Yield: 4-6 m 2 /l approx. per coat Package: 14 litres Colour: white 14
15 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER finish coat paints for exteriors PS 403 PS 403 Highly breathable finish PS 403 is a finish for exteriors that provides breathability, waterrepellency and excellent resistance to the outdoors, all at the same time. It also contains special molecules with improved resistance to mould and algae. It is suitable for application on any type of plaster, especially ones with dehumidifying properties, where it is necessary to offer high breathability and low water absorption at the same time. Very high breathability High water-repellent effect Improved resistance to mould and algae Specific weight: 1.58 kg/l approx. Dilution, in weight, with water: first coat up to 30%, second coat up to 20% for brush application Yield: 4-5 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches SKIN 432 SKIN 432 Protective siloxane finish SKIN 432 is a finish for exteriors offering excellent water-repellency and high breathability, characteristics that provide a versatile application of the product, from acting as a finish on new or existing plaster, to treating facades that are insulated with the FASSATHERM External Thermal Insulation Composite System. Thanks to its special formula, facades that are treated with SKIN 432 also tend to stay cleaner than traditional finishes for exteriors. Maximum protection and cleanliness of the facade Excellent water-repellency Treatment for insulated surfaces Improved resistance to mould and algae Specific weight: 1.55 kg/l approx. Dilution, in weight, with water: first coat and any intermediate coats, 15%. Finish coat must be diluted to 5-10% in weight, based on the selected colour Yield: 4-5 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches finish coat plaster RSR 421 For the proper use of products, consult the technical data sheets. RSR 421 Silicone resin finish coat plaster with rustic effect RSR 421 is a water-based finish coat plaster in paste form that provides breathability, water-repellency and excellent resistance to the outdoors, all at the same time. It also contains special molecules that improve its resistance to mould and algae. RSR 421 is suitable for application on any type of plaster, especially ones with dehumidifying properties, or on surfaces that are insulated with the FASSATHERM External Thermal Insulation Composite System. Compliant with standard EN Water-repellent and breathable Suitable for the FASSATHERM External Thermal Insulation Composite System and Renovation System Improved resistance to mould and algae Specific weight: 1.85 kg/l approx. Ready for use. Available in the following gradings: mm. Consumption: 0.6 mm: approx kg/m 2; for two layers; 1 mm: approx kg/m 2; 1.5 mm: approx kg/m 2; 2 mm: approx kg/m 2; 3 mm: approx kg/m 2; Package: 25 kg Colours: choose from Fassa's 228 colour swatches 15
16 SILICONE RESIN Application cycles protective cycles for exteriors High protection cycles for exteriors distinguished by the products in the high breathability and water-repellency Silicone resin System. Once FS 412 water-based primer has been applied, it is possible to finish off with RSR 421 thicklayer coating or SKIN 432 finish. On slightly irregular walls we recommend applying F 482I filling undercoat before the SKIN 432 finish. neutral undercoat FS 412 Primer for silicone resin cycles for slightly uneven substrates finish coat plaster RSR 421 Silicone resin finish coat plaster with rustic effect finish coat paint for exteriors SKIN 432 Protective siloxane finish filling undercoat F 482I Smoothing coat in paste form with fine plaster appearance finish coat paint for exteriors SKIN 432 Protective siloxane finish 16 For the proper use of products, consult the technical data sheets.
17 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER cycles for the renovation of damp walls The products in the Silicone Resin System provide high breathability and low water absorption at the same time, and are excellent for the finishing cycles in the renovation of damp walls. Once FS 412 water-based primer has been applied, it is possible to proceed with the highly breathable finish PS 403 or, for a rustic effect, RSR 421 finish coat plaster. neutral undercoat FS 412 Primer for silicone resin cycles finish coat paint for exteriors PS 403 Highly breathable finish Finish coat plaster RSR 421 Silicone resin finish coat plaster with rustic effect For the proper use of products, consult the technical data sheets. 17
18 SILICONE RESIN Application cycles cycle for the fassatherm external thermal insulation composite system To protect and complete the state of the art installation of the Fassatherm External Thermal Insulation Composite System, we recommend applying FS 412 neutral primer or FX 526 pigmented primer, followed by RSR 421 finish coat plaster, to obtain a film of paint with improved resistance to mould and algae. Additional protection is provided by applying SKIN 432 finish, which helps keep the surface even cleaner. neutral undercoat FS 412 Primer for silicone resin cycles pigmented undercoat FX 526 Pigmented anchoring undercoat Finish coat plaster RSR 421 Silicone resin finish coat plaster with rustic effect Additional protection finish coat paint for exteriors SKIN 432 Protective siloxane finish 18 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
19 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER 19
20 Wide range of colours HIGHLY PROFESSIONAL products Excellent performance Improved resistance to mould and algae 20
21 ACRYLIC-SILOXANE An innovative solution that combines the reliability of traditional acrylic formulas with the exclusive advantages of silicone resin. Ideal for those who have already experienced the efficiency of the Acrylic System first hand, Acrylic-Siloxane is an opportunity to obtain even higher performance and longerlasting results. FX 526 Universal pigmented primer undercoat p. 22 PX 505 Acrylic-siloxane filling finish p. 22 RX 561 Rustic acrylic-siloxane coating p
22 ACRYLIC-SILOXANE UNDERCOAT FX 526 FX 526 Universal pigmented primer undercoat FX 526 is a pigmented primer used as an anchoring filling undercoat for thick layer finish coat plasters in water dispersion, whether synthetic, mineral, silicate or siloxane. While its hiding power creates a coloured and uniform surface, its fine aggregate content also improves the grip of the finish, in both FASSATHERM External Thermal Insulation Composite Systems and painted masonry walls. White or pigmented filling undercoat For thick layer coatings Pigmented primer for FASSATHERM External Thermal Insulation Composite Systems Specific weight: 1.61 kg/l approx. Dilution: with approx. 5% water Yield: 6-8 m 2 /l approx. Package: 14 litres Colours: choose from Fassa's 228 colour swatches finish coat paint for exteriors PX 505 PX 505 Acrylic-siloxane filling finish PX 505 is a decorative, white or coloured, water-based paint for exteriors, for use on new and old finish coat plasters based on lime-cement, concrete, etc.. PX 505 offers excellent protection from atmospheric agents thanks to its breathability and water-repellent properties. Excellent protection Good breathability Excellent water-repellency Improved resistance to mould and algae Specific weight: 1.57 kg/l approx. Dilution, in weight, with water: first coat up to 30%, second coat up to 20% Yield: 4-5 m 2 /l approx. (2 coats). Package: 5 and 14 litres Colours: choose from Fassa's 228 colour swatches 22
23 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER Finish coat plaster RX 561 RX 561 Rustic acryl-siloxane coating RX 561 is a finish coat plaster in paste form composed of acrylic copolymers and special polysiloxanes and specific additives to make the product more resistant to mould and algae. The nature of the raw materials being used provides a finish with a rustic effect. RX 561 is used as a protective and decorative coat for exteriors on lime/cement base coat plasters and on walls that are insulated with FASSATHERM External Thermal Insulation Composite System. Also available in the winter version. Compliant with standard EN Excellent water-repellency Good breathability Excellent protection Improved resistance to mould and algae Specific weight: 1.85 kg/l approx. Dilution, in weight, with water: up to 2%, if necessary Available in the following gradings: mm Consumption: 1 mm: approx kg/m 2; 1.5 mm: approx kg/m 2; 2 mm: approx kg/m 2; Package: 25 kg Colours: choose from Fassa's 228 colour swatches For the proper use of products, consult the technical data sheets. 23
24 ACRYLIC-SILOXANE Application cycles finishing cycles The cycle for exteriors using Acrylic-Siloxane products is comprised of FX 526 pigmented universal base followed by, depending on the case, PX 505 acrylic-siloxane finish or RX 561 coating. Both solutions provide the treated walls with improved resistance to mould and algae. neutral undercoat FX 526 Universal pigmented anchoring undercoat finish coat paint for exteriors PX 505 Acrylic-siloxane filling finish Finish coat plaster RX 561 Rustic acrylic-siloxane coating 24 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
25 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER 25
26 Versatile use Wide range of colours Improved resistance to mould and algae Solutions for interiors 26
27 ACRYLIC Maximum versatility of application on various types of surfaces, easy installation and resistance to atmospheric agents. Very broad selection, up to 1950 NCS shades for every need. FA 249 Primer for acrylic systems p. 28 F 263A Filling undercoat with fine plaster appearance for exteriors and interiors p. 28 LV 207 Scrub resistant water-based paint with velvet finish p. 29 Gypsopaint Water-based paint for plasterboard p. 29 PL 215 Wash-resistant water-based paint p. 29 PT 213 Water-based paint with excellent hiding power p. 30 PI 209 Universal water-based paint p. 30 PM 298 Professional breathable water-based paint p. 30 P 200 Water-based paint for walls p. 31 PB 260 HYGIENE Water-based paint with increased mould resistance p. 31 AM 270 Renovation solution for interiors p. 31 PG 288 PROTECT Smooth scrub resistant matt finish p. 32 C 285 BETON Protective finish for concrete p. 32 PA 202 ACTIVE Protective filling finish p. 32 MR 287 Water-based paint for exteriors with high filling properties p. 33 OM 306 Homogeniser for mineral wall finish coat plasters p. 33 RTA 549 Acrylic finish coat plaster for thermal insulated walls p. 34 RAR 256 Rustic acrylic finish coat plaster p
28 ACRYLIC UNDERCOAT FA 249 FA 249 Primer for acrylic systems FS 249 is a water-based primer base used as an insulating agent, a primer or stabiliser for the base before applying any Acrylic System finishing products, on exteriors or interiors. Water-based product It evens out and reduces absorption High yield Specific weight: 1.00 kg/l approx. Dilution in weight: 1 part FA 249 with 6-8 parts water Yield: 25 m 2 /l approx. Package: Boxes of 12 pcs litre containers Colour: transparent F 263A F 263A Filling undercoat with fine plaster appearance for exteriors and interiors F 263A is a white paste skim coat, particularly suited to even out minor imperfections, providing an appearance that is aesthetically similar to two-coat plaster. On smooth surfaces such as plasterboard, it provides a perfect base to roughen up the surface, for the application of finishing products. Structural base with hiding power Fine grading: 0.5 mm Easy application Specific weight: 1.70 kg/l approx. Dilution, in weight, with water: 5-7% Yield: 4-6 m 2 /l approx. per coat Package: 14 litres Colour: white 28 For the proper use of products, consult the technical data sheet.
29 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER FINISH COAT PAINTS FOR INTERIORS LV 207 LV 207 Scrub-resistant water-based paint with velvet finish LV 207 is a white or coloured water-based paint with finish effect for interiors, suitable for lime, lime-cement, gypsum plasters and plasterboard. It makes walls scrub-resistant and provides them with a velvety appearance. Smooth and matt effect Broad range of colours Exceptional yield Excellent scrub resistance Specific weight: approx kg/l Dilution, in weight, with water: 30-35% for brush or airless application, 25% for roller application Yield: approx. 7-8 m 2 /l (2 coats) Package: 4 and 14 litres Colours: choose from Fassa's 228 colour swatches + NCS colour selection gypsopaint GYPsopaint Water-based paint for plasterboard Gypsopaint is a finish for interiors with excellent hiding power and high flatness, characteristics that make it particularly suitable for applications on Gypsotech plasterboards. Its exceptional hiding power makes it perfect for other wall substrates as well. High hiding power Specific for plasterboard Excellent whiteness Wash-resistant Specific weight: 1.48 kg/l approx. Dilution: in weight, with water: 10-15% approx. Yield: 4-5 m 2 /l approx. (2 coats) Package: 5 and 14 litres Colour: NCS colour selection PL 215 PL 215 Wash-resistant water-based paint PL 215 is a wash-resistant finish for interiors with an acrylic binding agent, in an aqueous emulsion with good breathability. It contains additives that make it easy to apply, easy to clean, and provide it with good expansion. The high titanium dioxide content also provides excellent hiding power. Wash-resistant High yield Good expansion Specific weight: 1.64 kg/l approx. Dilution, in weight, with water: first coat up to 35%, second coat up to 25% Yield: approx. 5-6 m 2 /l (2 coats) Package: 5 and 14 litres Colours: choose from Fassa's 228 colour swatches + NCS colour selection For the proper use of products, consult the technical data sheets. 29
30 ACRYLIC PT 213 PT 213 Water-based paint with high hiding power PT 213 is a finish for interiors with excellent breathability. It contains additives that make it easy to apply and provide it with good expansion. Its formula provides excellent hiding power even with a single coat. It is suitable for any type of masonry work with fine mortar and provides the walls with a uniform and pleasant aesthetic appearance. High hiding power Breathable Exclusive finish Specific weight: 1.66 kg/l approx. Dilution, in weight, with water: first coat up to 35%, second coat up to 25% Yield: approx m 2 /l (2 coats) Package: 5 and 14 litres Colours: choose from Fassa's 228 colour swatches PI 209 PI 209 Universal water-based paint PI 209 is a finish for interiors, with excellent breathability, and its formula provides high hiding power. It is suitable for any type of masonry work with fine mortar and provides the walls with a uniform, solid and pleasant aesthetic appearance. Very high breathability High hiding power Excellent yield Specific weight: 1.70 kg/l approx. Dilution, in weight, with water: first coat up to 40%, second coat up to 30% Yield: 4-5 m 2 /l approx. (2 coats) Package: 5 and 14 litres Colours: choose from Fassa's 228 colour swatches PM 298 PM 298 Professional breathable water-based paint PM 298 is a finish for interiors with very high breathability. It is used as a matt water-based paint and is suitable for any type of masonry wall with fine mortar. It gives walls a uniform and velvety appearance. It is particularly suitable for professional applications on large surfaces. For large surfaces High hiding power Excellent whiteness Specific weight: 1.72 kg/l approx. Dilution, in weight, with water: first coat up to 40%, second coat up to 30% Yield: 4-5 m 2 /l approx. (2 coats) Package: 5 and 14 litres Colour: white 30
31 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER P 200 P 200 Water-based paint for walls P 200, water-based paint for interiors, contains additives that make it easy to apply, provide it with good expansion and excellent hiding power. It is particularly suitable for professional applications on large surfaces. High breathability High hiding power Easy application Specific weight: 1.72 kg/l approx. Dilution, in weight, with water: first coat up to 40%, second coat up to 30% Yield: 4-5 m 2 /l approx. Package: 5 and 14 litres Colour: white specific products with improved resistance to mould PB 260 HYGIENE PB 260 HYGIENE Water-based paint with increased mould resistance PB 260 Hygiene is a water-based paint added with special molecules that make the paint film even more mould-resistant. It also has the same characteristics of a matt finish for interiors: easy to apply, good expansion, high hiding power and breathability. Improved mould-resistance Excellent hiding power Matt breathable paint Specific weight: 1.65 kg/l approx. Dilution, in weight, with water: first coat up to 35%, second coat up to 25% Yield: approx m 2 /l (2 coats) Package: 5 and 14 litres Colours: choose from Fassa's 228 colour swatches AM 270 AM 270 Renovation solution for interiors AM 270 is an aqueous solution for interiors which contains special broad-spectrum molecules that help prevent the formation of mould on the applied paint. The solution is also suitable for use on surfaces that are already affected by these types of phenomena and need to be restored with a new cycle of paint treatment. For sanitising cycles for interiors Specific weight: 1.00 kg/l approx. Yield: approx m 2 /l depending on the absorption of the absorption Package: boxes of 12 1-litre bottles For the proper use of products, consult the technical data sheets. 31
32 ACRYLIC finish coat paints for exteriors PG 288 PROTECT PG 288 PROTECT Smooth scrub resistant matt finish PG 288 PROTECT is particularly suitable for decorating and protecting finish coat plasters, both new and coloured, and for providing superior performance in terms of water-repellency and the resistance to the formation of algae mould. PG 288 PROTECT is also used for its function as a CO 2 barrier on any building or exterior concrete surface. Long-lasting Smooth scrub resistant finish with silk effect Anti-carbonation barrier effect Improved resistance to mould and algae Specific weight: 1.31 kg/l approx. Dilution, in weight, with water: between 5 and 8% with brush/airless application; undiluted with roller application Yield: 5-7 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches C 285 BETON C 285 BETON Protective finish for concrete C 285 BETON is used as a coloured protective and decorative finish on concrete and reinforced cement structures located on the exterior. It protects the treated building from carbonation, it provides a waterproofing action that reduces wear due to freeze-thaw cycles and gives it a uniform colour even if the casting is not homogeneous, all the while maintaining the appearance of facing cement. High anti-carbonation protection Excellent water-repellency Improved resistance to mould and algae Specific weight: 1.28 kg/l approx. Dilution, in weight, with water: first coat up to 15%, second coat up to 10% Yield: 5-6 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches PA 202 ACTIVE PA 202 active Protective filling finish PA 202 ACTIVE provides excellent water-repellency and alkaliresistance; also, the presence of specific broad-spectrum additives makes the paint film even more resistant to mould and algae. For these reasons it is suitable for application on the exterior of any lime/cementbased finish coat plaster. Scrub resistant water-based paint with filling properties Excellent protection against atmospheric agents Improved resistance to mould and algae Specific weight: 1.55 kg/l approx. Dilution, in weight, with water: first coat up to 30%, second coat up to 20% for brush application Yield: 4-5 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches 32
33 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER MR 287 MR 287 Water-based paint for exteriors with high filling properties MR 287 is a fine micro-coating with excellent water-repellency and alkali-resistance. It is suitable for application on any exterior or even interior lime/cement-based plaster, when it is necessary to provide a slightly rough, uniform finish. Fine scrub-resistant micro-coating Excellent hiding power Excellent protection Specific weight: 1.73 kg/l approx. Dilution, in weight, with water: up to 10% for brush application, undiluted or 5% at most for roller application Yield with brush application: 4-5 m 2 /l approx. (2 coats) Yield with roller application 3-4 m 2 /l approx. (2 coats) Package: 5-14 litres Colours: choose from Fassa's 228 colour swatches OM 306 OM 306 Homogeniser for mineral finish coat plasters OM 306 is used to protect coloured mineral finish coat plasters and make them homogeneous and uniform. It eliminates the possible formation of more or less intense spots that become more obvious in critical conditions. The nature of the raw materials being used allows the masonry to breathe perfectly. Provides a homogeneous and uniform effect Protective Breathable Specific weight: 1.30 kg/l approx. Dilution, in weight, with water: 15-20% max Yield: m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from the Folder Mineral Coatings For the proper use of products, consult the technical data sheets. 33
34 ACRYLIC finish coat plasters RTA 549 RTA 549 Acrylic finish coat plaster for thermal insulated walls RTA 549 is a finish coat plaster in paste form that is used mainly as a special protective and decorative coating for exteriors and with FASSATHERM External Thermal Insulation Composite Systems; its special formula creates a film with good resistance against the proliferation of mould and algae. Compliant with standard EN Excellent exterior protection Improved resistance to mould and algae Rustic effect Specific weight: 1.85 kg/l approx. Dilution, in weight, with water: up to 2%, if necessary Available in the following gradings: mm. Consumption: 1 mm: approx kg/m 2; 1.5 mm: approx kg/m 2; 2 mm: approx kg/m 2; 3 mm: approx kg/m 2; Package: 25 kg Colours: choose from Fassa's 228 colour swatches RAR 256 RAR 256 Rustic acrylic finish coat plaster RAR 256 is a finish coat plaster in paste form for exteriors composed of special high water-repellent acrylic binding agents. The nature of the raw materials being used provides good breathability of the masonry work and a rustic-effect finish. Compliant with standard EN Excellent exterior protection High water-repellency Rustic effect Specific weight: 1.85 kg/l approx. Ready for use. Available in the following gradings: mm. Consumption: 0.6 mm: approx kg/m 2; for two layers; 1 mm: approx kg/m 2; 1.5 mm: approx kg/m 2; 2 mm: approx kg/m 2; 3 mm: approx kg/m 2; Package: 25 kg Colours: choose from Fassa's 228 colour swatches 34
35 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER For the proper use of products, consult the technical data sheets. 35
36 ACRYLIC Application cycles cycle for the fassatherm external insulation composite system Finishing cycle for the Fassatherm External Thermal Insulation Composite System, involving the application of FA 249 undercoat followed by RTA 549 finish coat plaster. FA 249 primer can be replaced by FX 526 pigmented universal anchoring undercoat which, thanks to its excellent hiding power, creates a coloured and homogeneous surface for the subsequent application of the coloured finish coat plaster. neutral undercoat FA 249 Primer for acrylic systems pigmented undercoat FX 526 Universal pigmented anchoring undercoat Finish coat plaster RTA 549 Acrylic finish coat plaster for thermal insulated walls 36 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
37 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER finishing cycle for exteriors Three finishing cycles for exteriors. The application of FA 249 undercoat is the first step towards the subsequent application of the finish coat paint, which can be either PA 202 ACTIVE, Protective filling finish, PG 288 PROTECT, scrub-resistant matt finish, or MR 287 with high filling properties. When using colours with poor hiding power it is advisable to apply FX 526 undercoat beforehand; otherwise use F 263A smoothing plaster for slightly uneven substrates. neutral undercoat FA 249 Primer for acrylic systems for colours with poor hiding power standard cycle for slightly uneven substrates pigmented undercoat FX 526 Universal pigmented anchoring undercoat filling undercoat F 263A Smoothing coat with fine plaster appearance for exteriors and interiors PA 202 active Protective filling finish finish coat paints for exteriors PG 288 PROTECT Smooth scrub resistant matt finish MR 287 Water-based paint with high filling properties for exteriors The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated. 37
38 ACRYLIC Application cycles finishing cycle for concrete For concrete finishes, depending on the choice of colour, it is possible to apply C 285 BETON, which offers a selection of grey colours, or PG 288 PROTECT which offers a vast selection of colours. For the base you will need to consider the use of SOL-FIX 211 solvent-based primer as an alternative to FA 249 water-based primer. neutral undercoat FA 249 Primer for acrylic systems OR SOLVENT-BASED UNDERCOAT SOL-FIX 211 Solvent-based acrylic primer SELECTION OF GREY COLOURS finish coat paints for exteriors VAST SELECTION OF COLOURS C 285 BETON Protective finish for concrete PG 288 PROTECT Smooth scrub resistant matt finish 38 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
39 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER breathable cycle for interiors To finish indoor surfaces, depending on the case, it is possible to apply PT 213, PI 209 or PM 298, having previously applied FA 249 transparent primer; with slightly uneven substrates, however, apply F 263A filling undercoat, which is particularly suited to even out minor imperfections. neutral undercoat FA 249 Primer for acrylic systems for slightly uneven substrates filling undercoat F 263A Smoothing coat with fine plaster appearance for exteriors and interiors finish coat paints for interiors PT 213 Water-based paint with high hiding power PI 209 Universal water-based paint PM 298 Professional breathable water-based paint The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated. 39
40 ACRYLIC Application cycles wash resistant cycle for interiors When an indoor surface needs to be wash resistant, it is possible to choose LV 207 or PL 215. LV 207 in particular provides the walls with a smooth and matt effect. Both finishes boast a vast selection of NCS colours. neutral undercoat FA 249 Primer for acrylic systems for slightly uneven substrates filling undercoat F 263A Smoothing coat with fine plaster appearance for exteriors and interiors LV 207 Scrub resistant water-based paint with velvet finish finish coat paints for interiors PL 215 Wash resistant water-based paint 40 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
41 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER SANITISING cycle for interiors To sanitise interiors, once the surfaces have been suitably prepared with a specific treatment, it is essential to restore the surfaces with AM 270 which helps prevent the formation of mould on the applied paint. After the FA 249 primer, it is possible to apply PB 260 HYGIENE finish, which is even more resistant to the formation of mould. substrate preparation phase wall renovation phase complementary AM 270 Renovation solution for interiors neutral undercoat FA 249 Primer for acrylic systems finish coat paint for interiors PB 260 HYGIENE Water-based paint with increased mould resistance The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated. 41
42 ACRYLIC Application cycles cycle on plasterboard Gypsopaint and LV 207 are two finishes for interiors with high hiding power, a feature that makes them an excellent choice for applications on plasterboard surfaces. FA 249 primer must be applied preventively, followed by F 263A filling undercoat, on the smooth surface of plasterboard. This solution is required to roughen up the surface and provide a final appearance similar to fine mortar. neutral undercoat FA 249 Primer for acrylic systems for a fine mortar finish filling undercoat F 263A Smoothing coat with fine plaster appearance for exteriors and interiors LV 207 Scrub resistant waterbased paint with velvet finish finish coat paints for interiors GYPsopaint Water-based paint for plasterboard 42 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
43 UNDERCOAT FINISH COAT PAINT FOR interiors FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER 43
44 MATT appearance MINERAL products Breathable products For HISTORIC AND ARTISTIC BUILDINGS AND HISTORIC CENTRES 44
45 SILICATE Mineral finishes particularly suited for the decoration of historic centres, to achieve exclusive effects. Silicate-based products leave the vapour permeability properties of the substrate unchanged. FASSIL F 328 Silicate primer p. 46 FASSIL F 357S Filling undercoat with fine plaster appearance for exteriors and interiors p. 46 FASSIL P 313 Smooth silicate water-based paint p. 47 FASSIL R 336 Silicate finish coat plaster with rustic effect p
46 SILICATE UNDERCOATS fassil f 328 FASSIL F 328 Silicate primer FASSIL F 328 is a water potassium silicate-based primer base used as an insulating agent, a primer or stabiliser for the mineral surface before applying any Silicate System finishing products, on exteriors or interiors. Mineral primer Very high breathability Specific weight: 1.00 kg/l approx. Dilution in weight: 1 part FASSIL F 328 with 1 part water Yield: approx. 7-9 m 2 /l Package: 16 litres Colour: transparent fassil f 357s fassil f 357s Filling undercoat with fine plaster appearance for exteriors and interiors FASSIL F 357S is a potassium-silicate-based filling undercoat in paste form, particularly suited to even out minor imperfections, providing an appearance that is aesthetically similar to fine mortar. It also creates an adhesive bridge between surfaces treated with organic-based paints and the subsequent silicate-based finish, keeping the essential capillary network open so that water vapour can pass through. Mineral connection undercoat Filling and uniforming Fine grading: 0.5 mm Specific weight: 1.74 kg/l approx. Dilution, in weight, with water: 5-7% approx. Yield: m 2 /l approx. Package: 14 litres Colour: white 46
47 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER finish coat paint for exteriors FASSIL P 313 Fassil p 313 Smooth silicate water-based paint FASSIL P 313 is a potassium silicate water-based paint with very high breathability. It has a mineral aspect and complies with standard DIN The nature of the raw materials being used maintains the breathability of the masonry. Potassium silicate finish Smooth effect with hiding power High breathability Specific weight: 1.47 kg/l approx. Dilution, in weight, with water: first coat up to 30%, second coat up to 20% for brush application; Yield: m 2 /l approx. (2 coats) Package: 5-14 litres Colours: choose from Fassa's 228 colour swatches finish coat plaster fassil r 336 Fassil r 336 Silicate finish coat plaster with rustic effect FASSIL R 336 is a stabilised potassium-silicate paste finish coat plaster for exteriors and interiors, with very high breathability, compliant with DIN FASSIL R 336 is therefore particularly suited for cases requiring very high breathability, such as renovation cycles, and on historic buildings. Compliant with standard EN High breathability Mineral appearance Ideal for historic buildings Specific weight: 1.85 kg/l approx. Ready for use. Available in the following gradings: mm. Consumption: 0.6 mm: approx kg/m 2; for two layers; 1 mm: approx kg/m 2; 1.5 mm: approx kg/m 2; 2 mm: approx kg/m 2; 3 mm: approx kg/m 2; Package: 25 kg Colours: choose from Fassa's 228 colour swatches For the proper use of products, consult the technical data sheets. 47
48 SILICATE Application cycles cycles for exteriors Cycles for exteriors, distinguished by products from the Silicate System with very high breathability. Once FASSIL F 328 water-based primer has been applied, it is possible to finish off with FASSIL R 336 finish coat plaster or FASSIL P 313 finish coat paint. On slightly uneven substrates we recommend applying FASSIL F 357S filling undercoat before the FASSIL P 313 finish coat paint. undercoat FASSIL F 328 Silicate primer for slightly uneven substrates Finish coat plaster Fassil r 336 Rustic silicate coating finish coat paint for exteriors Fassil p 313 Smooth silicate water-based paint filling undercoat fassil f 357s Smoothing coat with fine plaster appearance for exteriors and interiors finish coat paint for exteriors Fassil p 313 Smooth silicate water-based paint 48 The cycles must be evaluated based on the substrate they will be applied to. Crumbling and unstable substrates will need to be consolidated.
49 UNDERCOAT FINISH COAT PAINT FOR EXTERIORS FINISH COAT PLASTER 49
50 Decorative MINERAL Exclusive effects NATURAL LIME MAXIMUM BREATHABILITY 50
51 DECORLIME Exclusive mineral products with special aesthetic effect and high breathability made with pure lime putty, ideal for the restoration of old buildings and to enhance the appearance of new buildings. Its natural composition provides excellent qualitative properties, reproposing antiqued finishes with modern products that are easy to apply. PC 144 Decorative mineral lime-based finish p. 52 I 133 Mineral fine-grained lime-based plaster for decorative products p. 52 LS 122 Mineral-based smoothing with satin finish p. 52 RC 155 Decorative smoothing for interiors p. 53 SD 111 Decorative gloss mineral lime putty for interiors p
52 DECORLIME decorlime PC 144 PC 144 Decorative mineral lime-based finish PC 144 is a lime-putty-based mineral finish, with excellent brightness, good expansion, high hiding power and low tendency to crumble. It can be used to overpaint and decorate the exterior walls of historic buildings coated with lime-based finish plasters, providing them with antiqued effects and breathability. Lime-based mineral paint Very high breathability Matt mineral effect Natural sanitiser Specific weight: 1.31 kg/l approx. Grading: < 0.1 mm Yield: m 2 /l approx. (2 coats) Package: 5-14 litres Colours: choose from Fassa's 228 colour swatches I 133 I 133 Mineral fine-grained lime-based plaster for decorative products I 133 is a fine-grained decorative plaster used both for finishing and for preparing the surface; based on lime putty, with high breathability and good surface filling properties. Decorative fine-grained plaster Lime-based mineral content Very high breathability Fine-grained plaster effect Specific weight: 1.60 kg/l approx. Grading: < 0.6 mm Yield: approx m 2 /kg (2 coats) Package: 25 kg Colours: choose from Fassa's 228 colour swatches LS 122 LS 122 Mineral-based smooth coat with satin finish LS 122 is a mineral smoothing based on lime putty and marble powder. LS 122 provides a smooth and compact finish ("marble" effect) for the interior and exterior decoration of buildings, providing very high breathability at the same time. Accordingly, it is used especially for historically and artistically relevant buildings. Marble effect Lime-based mineral decorative application High vapour permeability Specific weight: 1.50 kg/l approx. Grading: < 0.5 mm Yield: approx m 2 /kg (refined) Package: 25 kg Colours: choose from Fassa's 228 colour swatches 52
53 decorative finish RC 155 RC 155 Decorative smoothing for interiors RC 155 is a highly natural mineral putty containing lime and select aggregates, with high breathability, designed specifically to obtain a glossy finish with a "salt and pepper" effect on bases previously prepared with fine-grained plaster I 133. Mineral smoothing "Salt & Pepper" finish Very high breathability Specific weight: 1.55 kg/l approx. Grading: < 0.1 mm Yield: approx. 2 m 2 /kg (refined) Package: 25 kg Colours: choose from Fassa's 228 colour swatches SD 111 SD 111 Decorative gloss mineral lime putty for interiors SD 111 is a mineral putty made from lime paste and very fine limestone aggregates. SD 111 is primarily suited for decorating building interiors to enhance their aesthetic qualities, providing very high breathability at the same time. It is possible to obtain smooth and glossy surfaces by applying the product with a metal trowel in several cycles, for marble-like tones and shaded effects, particularly suited for exclusive architecture. Glossy effect Decorative mineral putty High vapour permeability Specific weight: 1.52 kg/l approx. Grading: < 0.1 mm Yield: approx. 1 m 2 /kg (refined) Package: 25 kg Colours: choose from Fassa's 228 colour swatches For the proper use of products, consult the technical data sheets. 53
54 Excellent elasticity For maintenance and restoration Wide range of colours To minimise the formation of any microcracks Improved resistance to mould and algae 54
55 ELASTOMER The products from the Elastomer System are particularly suited for the restoration and maintenance of exterior facades. Thanks to their elastic structure, they are the most suitable solution to minimise the first signs of microcracking, protect the facade and provide greater resistance to mould and algae. FOND-ELAST 223 Elastomer evening undercoat with fine mortar appearance p. 56 PE 224 ELAST Elastomer filling finish p. 56 RI-ELAST 225 Elastomer finish coat plaster with rustic appearance p
56 ELASTOMER UNDERCOAT fond-elast 223 Fond-elast 223 Elastomer evening undercoat with fine mortar appearance FOND-ELAST 223 is an evening and filling undercoat with fine mortar appearance, high elasticity and water-repellency; it is suitable for application on any finish coat plaster with the aim of minimising the formation of superficial microcracks over time, either as a preventive method or as a solution to an existing problem, prior to the finishing cycles. High elasticity Intermediate for elastomer cycles Excellent filler Suitable for microcracks Specific weight: 1.53 kg/l approx. Dilution with water: up to 10% in volume depending on the tool used for application. Yield: 4-5 m 2 /l approx. per coat. Package: 14 litres Colour: white finish coat paint for exteriors Pe 224 elast PE 224 elast Elastomer filling finish PE 224 ELAST is a protective and decorative water-based paint with high elasticity and water-repellency, suitable to minimise the formation of microcracks over time. It can be applied either as a preventive method or as a solution to an existing problem. Its special formula also provides a film achieving good resistance against the proliferation of mould and algae. Suitable for microcracks Excellent elasticity Excellent protection Improved resistance to mould and algae Specific weight: 1.45 kg/l approx. Dilution, in weight, with water: first coat up to 15%, second coat up to 5% for brush application; up to 10-15% for roller application Yield: 5-6 m 2 /l approx. (2 coats) Package: 14 litres Colours: choose from Fassa's 228 colour swatches 56
FIXIT.CH. Aerogel Insulating Plaster System. Handling Guidelines. Easy to use. Mineral based. 0.028 W/mK BAUSTOFFE MIT SYSTEM
FIXIT.CH Aerogel Insulating Plaster System Handling Guidelines BAUSTOFFE MIT SYSTEM λ 0.028 W/mK Mineral based Easy to use Efficient building insulation using space technology Aerogel high-performance
More informationkalox-pool draft 231 repairing refurbishing and finishing KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete.
kalox-pool draft 231 KALOX-POOL Waterproof cement-based mortar for protecting and finishing concrete. repairing refurbishing and finishing 8-30 C Trowel / Spray 4 mm kalox-pool EN 1504-2 MAIN FEATURES
More informationA GUIDE TO CHOOSING THE RIGHT LIME-BASED PRODUCTS FOR RESTORING MASONRY
A GUIDE TO CHOOSING THE RIGHT LIME-BASED PRODUCTS FOR RESTORING MASONRY Mape-Antique Range A guide to choosing the right LIME-based products and systems for restoring masonry To meet the latest requirements
More informationBaumit Renders for Porotherm Masonry. Application Guidelines. n Light and easy application n Tried and tested
Renders for Porotherm Masonry Application Guidelines n Light and easy application n Tried and tested Porotherm is a Wienerberger Group brand Ideas with a future Renders for Porotherm Masonry International
More informationSaint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)
Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and
More informationAcrylic Coatings: The Perfect Stucco Finish
Acrylic Coatings: The Perfect Stucco Finish By Larry Miller and Joe Miller Whether a stucco surface is new or old, there are many different finish coatings in today s marketplace that are supposedly right
More informationDL CHEMICALS DECO SNJF PARAFILL PARQUET EXTERIOR TRANSPARENT STRUCTURE
EN DL CHEMICALS DECO SNJF PARAFILL PARQUET EXTERIOR TRANSPARENT STRUCTURE QUICKLY REPAINTABLE NON-CRACKING MATT REMAINS MATT EASY TO APPLY A quickly repaintable elastic sealant based on acrylic dispersion.
More informationThe reference in façade protection
The reference in façade protection QUALITY RELIABILITY GUARANTEE Minor causes, major consequences The façade is the business card of any home or building. But a façade is subject to numerous external and
More informationCustomer Services - 5, rue René Panhard - 72021 LE MANS Cédex 2 FRANCE Tel.: (+33) 02 43 83 83 00 - p.ball@colart.fr
Customer Services - 5, rue René Panhard - 72021 LE MANS Cédex 2 FRANCE Tel.: (+33) 02 43 83 83 00 - p.ball@colart.fr Acrylic paint is a means of expression that lets you produce a wide variety of pictorial
More informationTechnical Data Sheet Art. No. 1810. Kiesol. applications. Shelf-life. rate depending on application. Characteristic data of the product
Page 1 of 5 Technical Data Sheet Art. No. 1810 Kiesol Deep protection silicification for waterproofing and refurbishing old and new buildings in the Kiesol System according to WTA Code of Practice 4-4-04/D
More informationMold Preventing I nterior System
interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal
More informationWATERPROOFING OF WET ROOMS
WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof
More informationALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE
Mapeguard WP System ALKALI-RESISTANT WATERPROOFING AND DECOUPLING MEMBRANE UNDER CERAMIC TILES AND NATURAL STONE Products used: Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard WP
More informationImportant Notes Color
Important Notes Color Introduction A definition for color (MPI Glossary) The selective reflection of light waves in the visible spectrum. Materials that show specific absorption of light will appear the
More informationRetail Price List 2015
Retail Price List 2015 SETTING MORTARS SERVOFLEX TRIO SUPER TEC Flexible Full Transfer Thin Set and Medium Bed Mortar 20 KG Flexible, cement-based thin set and medium bed mortar with polymer additive for
More informationTecnoepo Flooring System 185
Certificate ICMQ 1305-CPD-0808 Approved Standard EN 1504-2 prospect ZA.1f Direttive 89/106/CEE TECNOCHEM E LEED LEED Leadership Energy Environmental Design THE PRODUCTS: Primer TECNOFIX EP 110 Primer two-component
More informationBEST PRACTICE GUIDE. Fibrelime Premixed Universal Plaster and Render
BEST PRACTICE GUIDE Fibrelime Premixed Universal Plaster and Render Contents: Fibrelime description Fibrelime suitability Preparation before application Application Aftercare Painting General Recommended
More informationAdvisers for real building
Advisers for real building baumit.com Effective and economical construction from walls to insulation Cost and needs comparisons Comfortable room climate Save energy protect the environment Proper wall
More informationPRODUCT DESCRIPTION 29/08/2014
29/08/2014 PRODUCT DESCRIPTION Quartz Carpet is a seamless flooring system based on coloured or uncoloured quartz grains that are bonded with resin (epoxy or polyurethane). This system is used for houses,
More informationBETON. CONCRETE EFFECT IMITATION CONCRETE FOR A PURE AND MODERN EFFECT Application instructions primer - base - finish
BETON CONCRETE EFFECT IMITATION CONCRETE FOR A PURE AND MODERN EFFECT Application instructions primer - base - finish beton PRIMER The colour of the cachemire beton Primer is white, to get the best result
More informationTIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationMineral waterproof coating PCI Dichtschlämme
Mineral waterproof coating PCI Dichtschlämme 305 for basement walls, swimming pools and potable water tanks With official test certificate. FIELDS OF For indoor and outdoor use. For walls and floors. For
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More informationMapei systems for radiating floor heating with high thermal efficiency
Mapei systems for radiating floor heating with high thermal efficiency PRODUCTS FOR CERAMIC TILES AND STONE MATERIAL ADHESIVES SEALANTS CHEMICAL PRODUCTS FOR BUILDING III MAPEI systems for radiating floor
More information09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS
09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS PDS SE-160 01-2006 1. PRODUCT NAME SE-160 Clear Surface Coating (water-based copolymer) Specialty Elastomeric Topcoat 2. MANUFACTURER
More informationRESTORATION + DECORATION OF BALCONIES AND TERRACES. Decorative, Easy to Maintain and Slip-Resistant Surfaces
RESTORATION + DECORATION OF BALCONIES AND TERRACES Decorative, Easy to Maintain and Slip-Resistant Surfaces BALCONIES AND THEIR LOADS For that extra bit of pleasure, the Remmers Balcony and Terrace Programme
More informationDevelopment of conservation compatible new materials for envelope retrofitting of historic buildings
Development of conservation compatible new materials for envelope retrofitting of historic buildings Carsten Hermann, Senior Technical Officer, Historic Scotland Glasgow is one of seven EFFESUS case study
More informationCement Plaster. www.qatarplaster.com
Cement Plaster www.qatarplaster.com COMPANY PROFILE Qatar Plaster (QP) is a leading manufacturer of dry mix products based in Mesaieed Industrial City Doha, Qatar. Qatar Plaster (QP) has come up with a
More informationARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials
ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials SECTION 03 92 50 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,
More informationITEM NO. DESCRIPTION BIDDER CODE NO. UNIT COST UNIT COST 1 GALLON 5 GALLON. 1 Oil Base Exterior House Paint Mobille Paint 5-18 $29.
BID ON: PAINT AND SUPPLIES BID NO: 13-22 OPENED: MARCH 1, 2013 @ 2:00 PM 1 Oil Base Exterior House Paint Mobille Paint 5-18 $29.00 XXX Acrylic Latex Exterior Gloss House Paint 2 Super White Sherwin Williams
More informationPRODUCT DATA SHEET Sika Cable System
PRODUCT DATA SHEET Corrosion protection for bridge cables of steel and galvanized steel PRODUCT DESCRIPTION The Sika Cable System consists of coating materials as well as a sealing respectively injection
More informationHigh Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES
High Performance Building Materials SCREEDS REPAIR MORTARS LEVELLING & SMOOTHING WATERPROOFING TILE ADHESIVES & GROUTS PRIMERS & ADDITIVES ARDEX manufacture a complete range of high performance building
More informationNEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE
NEGATIVE SIDE WATERPROOFING SYSTEMS FOR MASONRY AND CONCRETE What is negative side waterproofing? A typical case of negative side waterproofing is when water comes through the walls of a basement and the
More informationwww.mpmsrl.com flooring sin materiali protettivi milano
www.mpmsrl.com flooring re sin materiali protettivi milano Tradition, experience, technological innovation. mpm - Materiali Protettivi Milano - s.r.l. is an Italian company that is 60 years old and has
More informationDivision 9. SignaFlor Pad and Pour Flooring System
Division 9 SignaFlor Pad and Pour Flooring System SPECIFICATIONS Page 1. General... 2 1.1 Description 2 1.2 Quality Assurance 2 1.3 Submittals 2 1.4 Delivery and Storage 3 1.5 Warranty 3 1.6 Working Conditions
More informationK2 STONE NATURAL VENEER
INTRODUCTION WHAT IS K2 NATURAL THINSTONE VENEER? Natural K2 Stone veneer is real stone, cut 1 inch thick, making it light enough to be installed as a veneer. Sometimes referred to as thin veneer, thin
More informationSuccessful Painting Jobs Start Here.
Successful Painting Jobs Start Here. The Right Primer Makes All the Difference. Selecting the right primer for the job is a critical part of improving paint coverage and achieving the highest quality finish
More informationImproving the flood resistance of your home. Advice sheet 4: Flood-resilient walls.
Improving the flood resistance of your home Advice sheet 4: Flood-resilient walls. This sheet provides guidance on identifying different types of wall, and reducing the flow of floodwater through them
More informationApproved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very
More informationSummit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a
Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a professional-looking paint job for hundreds of dollars less
More informationPure silicate paint for HF (+ LF) 37 db (99.98%) at 7.5 m²/l. 30 db (99.9%) at 7.5 m²/l Screening 2-layer. Building interior / exterior
GmbH & Co. KG Shielding paints 1/6 Product overview / technical data shielding paints are electro-conductive coatings for the protection of large areas against high-frequency (HF) radiation and (or) against
More informationTechnical Information DF30
Technical Information DF30 Performance Pigments and Colors Lead Free Onglaze Colours for Porcelain, Bone China, Vitreous China, Earthenware, and Enamel In this leaflet, Ferro presents SAMBA100, the next
More informationTECHNICAL DATA SHEET. TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL. Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079
TECHNICAL DATA SHEET TOPECA, Lda Rua do Mosqueiro 2490 115 Cercal Ourém PORTUGAL Tel.: 00 351 249 580 070 Fax.: 00 351 249 580 079 geral@ topeca. pt www.topeca.pt juntaemcor plus+ Pág. 2 Sanded texture
More informationUnbeatable energy efficient glass curtain wall system
Unbeatable energy efficient glass curtain wall system CONTENT Introduction 1 System 2 World Class Engineering 4 Unit Selection 5 Energy Efficiency & Comfort 10 Maximised Installation Efficiency 12 Aesthetics
More informationBLACK JACK ALL WEATHER ROOF COATING
PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.
More informationGuide. to Common Brick Staining. in New Construction. www.prosoco.com. improving the appearance and performance of buildings
Guide to Common Brick Staining in New Construction www.prosoco.com improving the appearance and performance of buildings Which stains invited themselves to your projects? Here s a rogues gallery of masonry
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 27 C calculated IED (2010/75/EU) (calculated)
Approved 402;2521 1 2521 zinc epoxy ^(ValidationDate). 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationStone and Masonry Restoration
Stone and Masonry Restoration with Remmers Systems Cleaning Equipment Cleaning Chemicals Consolidation and Strengthening Restoration and Pointing Preservation and Conservation Stone and Masonry Restoration
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationPOLYURETHANE FOAM CONCEPT
POLYURETHANE FOAM CONCEPT Scandinavian Product Range (Now with Nordic Product Labels) In General Selena FM has become the second largest polyurethane manufacturer in the world in under 30 years of operations
More informationINDEPENDENTS AIL RET 2012
RETAIL INDEPENDENTS 2012 Contents Introducing 2 new colours to the Hammerite range: Direct To Rust Metal Paint 4-5 Metalcare - Task Specific Products 6-7 Metalcare - Primers & Converters 8-9 Muted Clay
More informationTriarch Products Over Various Interior Substrates
Triarch products work well over a variety of substrates, both for interior and exterior settings. This document will only discuss interior substrates and is not intended to be a technical discussion of
More informationELASTOCEM. Technical features. Applications. Two-component flexible, waterproofing and protective cementitious grout.
Two-component flexible, waterproofing and protective cementitious grout. 1504-2 PI-MC-IR Technical features Two-component grout, based on cements, selected aggregates, special additives and synthetic polymers
More information187123 REGGAE 30.3x34 cm./11.9"x13.4" D923. Natural Product that might suffer colour variations 1. PROPER PREPARATION OF SURFACE
187123 REGGAE 30.3x34 cm./11.9"x13.4" D923 Natural Product that might suffer colour variations 1. PROPER PREPARATION OF SURFACE The wall must be firm, levelled, dry and clean. Uneven surfaces greater than
More informationThermocem. unicem. Mortar additive. Mortar additive. unicem. Thermocem. Substrate preparation. products. Features: Recommended uses:
Mortar additive Mortar additive unicem Facades Thermocem Façades unicem is a latex that enhances the overall mechanical performance of cement-based mortars. Specially recommended for cement rendering,
More informationTechnical Data Sheet Stolit Milano
Organic finishing render, ultra fine-grained Characteristics Application Properties Appearance Information/notes exterior on to organic and mineral substrates as a multi-layer system not suitable for horizontal
More informationDenco Sales Aspire Catalog
Denco Sales Aspire Catalog This catalog is a product reference guide. For more detailed information, inventory availability, pricing, data sheets, printing profiles and more click here to go to the Denco
More informationConstruction. Sikagard Protective and Decorative Coatings and Sealers for Exterior Concrete and Masonry CMYK
Construction Sikagard Protective and Decorative Coatings and Sealers for Exterior Concrete and Masonry CMYK The Sika Range of Coatings Sika s Protective Coatings offer a first and lasting line of defence
More informationMinor Cracks in Horizontal Surfaces
Cracks, chips and broken or flaking areas in concrete are not only unsightly, they can lead to further deterioration of the surface. The result is a costly replacement project as opposed to a simple repair.
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationDIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP
DIY GUIDE 10 EASY STEPS FOR TREATMENT OF RISING DAMP CONTENTS WHAT IS RISING DAMP STEP 1 SURVEY STEP 2 METER READINGS STEP 3 CONCLUSION STEP 4 PREPARATION FOR TREATMENT STEP 5 TYPE OF TREATMENT STEP 6
More informationWaterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries
Waterproofing System for Wastewater Tanks in Petrochemical Industries and Refineries Introduction Wastewater of petrochemical industries and refineries contains high amounts of emulsified aliphatic or
More informationUNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
More informationInnovation #9/12. of all Formaldehyde for up to
Innovation #9/12 of all Formaldehyde for up to Gyproc Activ Air Benefits of Activ Air Improves the indoor air quality, providing healthier interior environments Permanently reduces Formaldehyde and other
More informationTHORO. Waterproofing Systems
THORO Waterproofing Systems Contents Welcome to the world of Thoro 3 Waterproofing 4 Thoroseal 5 Thoroseal FC 6 Thoro Acryl 60 6 Thoroseal WR 7 Thoroseal FX100 8 Thoroseal FX110 9 Thoroseal FX 1K 10 Thoro
More informationLAYING BLOCK AND BRICK
LAYING BLOCK AND BRICK Products highlighted in this section: SAKRETE Type N Mortar Mix SAKRETE Type S Mortar Mix Brick And Block Laying Basics The first step in building a brick or block wall is to construct
More informationWater in liquid or in vapour form
Waterproofing With Cementitious Slurries By Dr. Hermann Lutz, Wacker Polymer Systems Water in liquid or in vapour form is the most destructive weathering element for building constructions, like concrete,
More informationHigh Performance Solutions and Compounds for Roofing and Structural Waterproofing
High Performance Solutions and Compounds for Roofing and Structural Waterproofing IKO is a worldwide group of companies with extensive experience and specialist technical knowledge. IKO is a leader in
More informationUltracolor CG2. Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence
IN COMPLIANCE WITH EUROPEAN STANDARDS Ultracolor CG2 CEMENTITIOUS GROUT Fast setting and drying grout for 2 to 20 mm joints, available in 26 colours; does not produce efflorescence WHERE TO USE Interior
More informationSC2000 CEMENT BONDING PROCEDURES
Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with
More informationConstruction. Pre-Bagged Structural Waterproofing System. Product Description. Product Data. Tests. Form
Construction Product Data Sheet Edition 15/07/2013 Identification no: 01 07 05 04 001 0 000001 Sika 1 Pre-Bagged Structural Waterproofing System Product Description Pre-Bagged Structural Waterproofing
More informationHoesch Matrix System individuell. ThyssenKrupp Steel Europe Thinking the future of steel
Hoesch Matrix System individuell ThyssenKrupp Steel Europe Thinking the future of steel 2 3 Steel in perfect shape and precision Steel the material of contemporary architecture. Throughout the production
More informationThe Anatomy of a Label
The Anatomy of a Label Three key elements make up a label: face stock, release liner, and adhesive. Face Stock: Face stock is the material of the label that carries the imprint. The print can be applied
More informationConcrete Repair. Applications and Procedures
Concrete Repair Applications and Procedures Objectives Identify what surface preparation is needed Identify typical modes of failure and testing methods How to choose the correct material for the repair
More informationRAW INSTALLATION GUIDE
SUGGESTIONS / FACTORS TO BE TAKEN INTO CONSIDERATION BIANCO CARRARA The small holes, commonly referred to as "tarolo", are a natural characteristic of bianco carrara. In the Raw finish, this characteristic
More informationWecryl Waterproofing System under surfacing supplied by others
Brief description The Wecryl waterproofing system allows a high-quality, seamless and crack-bridging waterproofing layer to be installed under loose-laid or bonded surfacing supplied by others (stone slabs,
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationHSF 54 HSF 74 HSF 92 NSF 34 Shielding HF X X X Shielding LF X X X X. Our ecological mineral paint for HF (+ LF) for LF Screening 1-layer
Shielding paints 1/5 Product overview shielding paints are electro-conductive coatings for the protection of large areas from electromagnetic radiation (EMR). They offer best shielding qualities for protection
More informationSEE HOW TO MAKE LIME PLASTER WHY USE LIME? PATTI STOUTER, BUILD SIMPLE INC. FEBRUARY 2013
SEE HOW TO MAKE LIME PLASTER PATTI STOUTER, BUILD SIMPLE INC. FEBRUARY 2013 WHY USE LIME? Lime plaster forms a light, clean, and durable surface that is resistant to weather and mold. A thin layer attaches
More informationPRIMERS & SPECIALIST PAINTS
& PAINTS Professional primers and specialist paints. Offering a wide choice of professional primers to coat and protect wood and metal inside and out plus specialist paints for specific applications. Symbols
More informationDispersions for the adhesive industry Innovative raw materials for numerous applications
Dispersions for the adhesive industry Innovative raw materials for numerous applications Not all are the same! These days, almost all industries are dependent on innovative adhesive technologies. Modern
More informationSuperconcrete. your green flooring choice www.klindex.it
Superconcrete your green flooring choice www.klindex.it Transform your concrete floor! The purpose is to transform the ordinary concrete floor into a floor which is remarkably shiny and dust free. Esthetically
More informationINDUSTRIAL FLOORING INSTALLATION CHALLENGES. James C. Ziegler, ArmorSeal Product Manager Sherwin Williams Cincinnati, Ohio, USA
INDUSTRIAL FLOORING INSTALLATION CHALLENGES James C. Ziegler, ArmorSeal Product Manager Sherwin Williams Cincinnati, Ohio, USA Abstract: Specifier's and contractors not only need to properly evaluate the
More informationDryvit Finish System For Exterior Soffits
Dryvit Finish System For Exterior Soffits 100% Acrylic Architectural Coatings For Use on Exterior Soffits Dryvit Finish System For Exterior Soffits Specifications DRYVIT SYSTEMS CANADA MANUFACTURER SPECIFICATION
More informationWELCOME COLOR! TRENDY COLOR COMBINATIONS TIPS FOR YOUR LIVING SPACES
WELCOME COLOR! TRENDY COLOR COMBINATIONS TIPS FOR YOUR LIVING SPACES experiment, refresh, paint and change your world! Color! For sure, you have your favorite one. Whichever this is, ISOMAT has it! ISOMAT
More informationMapelastic Smart PI-MC-IR
IN COMPLIANCE WITH EUROPEAN STANDARD EN 1504-2 (C) PRINCIPLES PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE IN COMPLIANCE WITH EUROPEAN STANDARD EN 14891 CMO1P LIQUID-APPLIED WATER IMPERMEABLE PRODUCTS
More informationAcrylic Enamel Topcoat
Acrylic Enamel Topcoat ACRYL-GLO TECHNICAL DATA SHEET The ACRYL-GLO single-stage acrylic enamel paint system provides a durable finish that is easy to apply and suitable for both commercial and passenger
More informationApplication Guide For Set of Preparations Designed for Protection of Construction Materials Against GRAFFITI INTRODUCTION
Qualichem, spol. s r.o. Sokolská 1041, 276 01 Mlník Application Guide For Set of Preparations Designed for Protection of Construction Materials Against GRAFFITI INTRODUCTION Company Qualichem, s.r.o.,
More informationProfiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
More informationBITUMINOUS ROOF COATINGS, CEMENTS, PRIMERS AND ADHESIVES
BITUMINOUS ROOF COATINGS, CEMENTS, PRIMERS AND ADHESIVES ABOUT POLYGLASS U.S.A., INC. MODIFIED CEMENTS & ADHESIVES MASTICS ALUMINUM COATINGS EMULSIONS & PRIMERS PROTECTIVE COATINGS Polyglass manufactures
More informationCREATING TOMORROW S SOLUTIONS
CREATING TOMORROW S SOLUTIONS CONSTRUCTION I Facade I Insulation Energy-Efficient Construction with External Thermal Insulation Composite Systems All around the world, 40% of primary energy is consumed
More informationSikagard -203 W (Steridex)
Product Data Sheet Edition 03/10/2011 Identification no: 020807010010000001 Sikagard-203 W (Steridex) Single component, waterborne modified acrylic resin surface coating Product Description Uses Characteristics
More informationWATERPROOFING SYSTEMS IN BUILDING CONSTRUCTION
WATERPROOFING SYSTEMS IN BUILDING CONSTRUCTION Ar. Soma Anil Mishra Ar. Prakool Soni Dr.R.K. Pandit Asso. Professor Practising Architect Professor & Head I.P.S Academy, Indore (M.P) M.I.T.S, Gwalior (M.P)
More informationUSER GUIDE Easier, Safer, Betta! www.gripsetbetta.com WATERPROOFING
USER GUIDE Easier, Safer, Betta! www.gripsetbetta.com WATERPROOFING Welcome to Gripset Betta, Over the past 3 decades through the tireless commitment to improve and enhance the way buildings are waterproofed,
More informationThe new frontier of luxury porcelain slabs
The new frontier of luxury porcelain slabs www.sapienstone.com SapienStone, the new frontier of luxury porcelain slabs. With our beautiful porcelain slabs, SapienStone decrees a revolution in the architectural
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationSikaBond Adhesive Systems for Floor Coverings. Innovation & Consistency. since 1910
SikaBond Adhesive Systems for Floor Coverings Innovation & Consistency since 1910 Sika s Comprehensive Competence in Flooring Sika has an extensive range of products for use in many different types of
More informationBONCOTE CEMENT PAINT. Product Specification. Product Name: PRODUCT DESCRIPTION: SUGGESTED APPLICATIONS: LOCATION: ENVIRONMENTAL INFORMATION:
Product Specification Product Name: BONCOTE CEMENT PAINT PRODUCT DESCRIPTION: APAS* Target level for this product: 70g/L. is a Portland cement based product supplied in a powder form and coloured with
More informationRockwool Flexi Insulation Application Guide
Pitched roof Rafters InterMediate floors INTERNAL partitions external Framed walls separating floors Separating Walls Rockwool Flexi Insulation Application Guide Ground floor The perfect fit for any framed
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Not approved 2063;2064 1,2 2063 ^(ValidationDate) 1 Product description This is a two component solvent free polyamine cured coating. It is a general purpose tank lining with good chemical resistance.
More information