Created by Lizzy Mason More info at #LincolnBarons

Transcription

1 1

2 CONTENTS Page 2

3 Make a Baron colour, cut and stick Baron Russian style doll You will need... Access to a A4 Printer.four up to A4 size or A3 for A3 Baron or large printer it s up to you the largest template size on A2 will make a A2, A1 or A0 if you have that size printer so all you need to do is play with it and have fun colouring in your own Baron art. Clean wipe-able surface. Print outs from template download in chosen sizes & guidelines. Cartridge paper or card in same size and quantity as print outs. Wax crayons, felt tips or pencil crayons. Strong Non toxic clear graft glue Scissors Pencil sharpener and rubber Spray Mount 3

4 Print out your template in your chosen size. Draw your chosen design in pencil. Cut the bottom of the baron template out on the top line as shown.. This is so you can line up your Drawings, unless on same page as with small print outs. 4

5 Out line your drawing with a black edge. I used a small black wax crayon. Sharpen your wax crayon with a pencil sharpener to get details if needed. Get the crayons out I have used wax crayons large and small, with some felt tips. Colour in as desired, I have used felt tips as a back wash of colour and over layered with wax crayon. 5

6 Once coloured in, cut out template shapes. Using spray mount glue templates onto a thick sheet of cartridge paper or card in any colour. Then cut out the base template as shown and fold tabs as in image. 6

7 Cut out the rest of the template that you stuck to thick cartridge paper or card Glue the base of Baron as shown with the tab folded, as in above image. Then fold in half to get a crease on the other side as in this image. Get the circle base shape and place glue on the outside of the tabs. 7

8 Place the base of the baron on top of the circle base with glued tabs as shown &... press together to stick Colour in the long plain rectangle shape part in desired colour. and glue together like you did on the first baron part. Then slot into thee base of the Baron and this should sit tight without gluing. 8

9 Glue the top part together with side tab folded. Then fold when dry to get crease on other side. Colour edges with black crayon to tidy and snip where needed. 9

10 Samples of A A6, A5, A4 and A3 Baron 10

11 Samples of A A6, A5, A4 and A3 Baron 11

12 Samples of A A6, A5, A4 and A3 Baron 12

13 Page 1of 1 for A5 Barons Print A4 for A6 size Barons. 13

14 Page 1 of 1 for A4 Barons Print A4 for A5 size Barons. 14

15 Template 1 of 3 for A4 or A3 Barons Print A4 for A4 size Barons or...a3 for A3 Barons. 15

16 Template 2 of 3 for A4 or A3 Barons Print A4 for A4 size Barons or...a3 for A3 Barons. 16

17 Template 3 of 3 for A4 OR A3 Barons Print A4 for A4 size Barons or...a3 for A3 Barons. 17