Human Cremation Equipment Catalog

Transcription

1 Human Cremation Hydraulic Tables Auto Loaders Remains Processors Storm Collars Coolers

2 Human Cremation 1 BL25M Lift Table The BL25M is our standard when it comes to quality of lift tables. With the capability of lifting 227kg, this is the lift table that will suit your needs. Fully equipped, this lift table comes with a 1/3 horse power motor designed for lifting loads between 45kg and 180kg with ease. Since fuel efficiency is a high priority, a digital weigh scale can be added for accurate body weight, in turn adding ease to the operator's job of lifting and loading. All the electronics are powered by a 12 volt battery mounted at the base of the table. The top is lined with six alloy rollers with spring loaded pins for easy removal/exchange. There are two brakes located at the front and rear of the rollers and are controlled by using the red handle lever at the front of the lift table. Specification Capacity: 227Kg Raised Height: 1372mm Lowered: 559mm Weight: 181.5Kg Table Dimensions: 559mm x 1829mm Total Length: 2007mm Power: 12 Volt Battery with charger BL 25M-HD>

3 Human Cremation 2 BL25MHD Lift Table The BL25MHD is our standard quality of Heavy Duty lift tables. With capabilities of lifting 450kg and fully equipped, this lift table comes with a 1/3 horse power motor designed for lifting loads between 45kg and 400kg with ease. Since fuel efficiency is a high priority, a digital weigh scale can be added for accurate body weight, in turn adding ease to the operators job. All the electronics are powered by a 12 volt battery mounted at the base of the table. The top is lined with six alloy rollers with spring loaded pins for easy removal/ exchange. There are two brakes located at the front and rear of the rollers and are controlled by using the red handle lever at the front of the lift table. Specification Capacity: 454Kg Raised Height: 1397mm Lowered: 622.3mm Weight: 227Kg Table Dimensions: 565mm x 1829mm Total Length: 2007mm Power: 12 Volt Battery with charger <BL25M BL30M >

4 Human Cremation 3 BL30M Lift Table The BL30M is designed specifically for large cooler storage. Reaching a maximum height of 1892mm. Nothing is too tall for this lift table. Fully equipped, this lift table comes with a 1/3 horse power motor designed for lifting loads between 45kg and 295kg with ease. Since fuel efficiency is a top priority for B&L, a digital weigh scale can be added for accurate body weight, in turn adding ease to the operators job. All the electronics are powered by a 12 volt battery mounted at the base of the table. The top is lined with 6 alloy rollers with spring loaded pins for easy removal/exchange. There are two brakes located at the front and rear of the rollers and are controlled by using the red handle lever at the front of the lift table. Specification Capacity: 295Kg Raised Height: 1892mm Lowered: 559mm Weight: 181.4Kg Table Dimensions: 559mm x 1829mm Length: 2007mm Power: 12 Volt Battery with charger <BL25M-HD BL499 >

5 Human Cremation 4 BL Auto Loader Specifically build for human cremation, this loading table suites the entire N20 series and the complete phoenix range of human cremators supplied by Addfield. The automatic control system plugs into the retort to facilitate a fully automatic loading process from a remote viewing room. It consists of a steel frame and rollers with a stainless steel outer casing. The control system is run by a programmable logic controller (PLC). The autoloader can be setup to load multiple retort or manual loading via a V groove track system. Feature on the control panel are Start-for autoloading, Jog-to initiate rollers only and stop-for emergency use. Specifications: Capacity: 295Kg Length: 2134mm Width: 1321mm Table Size: 813mm x 2134mm Weight: 27Kg Height: Various options available BL Auto Loader <BL30M Remains Processing >

6 Human Cremation 5 Hand Trigger Magnet The hand trigger magnet is an essential part of your cremation tools. It is used to remove the metal parts from the cremated remains before processing. The magnet, when held over the remains, picks up the metal using a high powered magnetic force. When held over a disposal container, the trigger is pulled away from the metal particles. As the force weakens, the metallic drops into the container for disposal. Pace Maker Detector Eliminate your problems with B&L s hand held pace maker detector. It s easy to use.. just wave the wand over the container and if a pace maker is present you will get both an audible and lighted alarm. <Auto Loader Containers >

7 Human Cremation 6 Cremated Remains Collection Pan Constructed from 14 gauge stainless steel our cremated remains collection pan is perfect for retrieving hot remains and organizing after a cremation. It can be placed on our cremated remains cooling system (see below) for a quicker cool down time and also sorted through with our hand trigger magnet for any metal remains (see page 5). 610mm x 254mm x 203mm. Custom cremated remains pans available on request. Cremated Remains Cooling System This system comes ready to mount to a wall or any fixed structure.the system comes with tech screws for mounting to wood or steel. A fan on the bottom of the cooling system pushes air over the collection pan and cools the remains in just minutes for safe handling. The fan requires a 240V electrical outlet. <Remains Processing BL199 >

8 Human Cremation 7 BL199 Remains Processor A state-of-the-art cremated remains processor. It is an advanced pulverization system that is quiet, dust free and shuts off automatically. The remains are powdered in less than 30 seconds in the stainless steel drum. The pulverization is accomplished by a rapidly turning 1/4" thick stainless steel blade driven by a 1.5 HP motor. A dust tight seal is provided on the drum lid to prevent any leakage. Specification Height: 1524mm Loading Height: 1168mm Width: 330mm Length: 813mm Weight: 42Kg Warranty: 1 year Power Requirements: 120 VAC 60 HZ 13 FLA RPM Robust Reliable Efficient Rob ust Reliable Efficient Robust Reliable Efficient Robust Reli able Efficient Robust Reliable E ent Robust Reliable Efficient R ble Efficient Robust Reliable E le Efficient Robust Reliable Eff ust Reliable Efficient Robust Rel Robust Reliable Efficient Rob ust Reliable Efficient Robust Reliable Efficient Robust R Robust Reliable Efficient < Containers BL449 >

9 Human Cremation 8 BL499 Remains Processor A fully automatic dust control processing center. This processor comes fully equipped and complete with minimal installation needed. The microprocessor controlled processing center continuously removes dust particles while the remains are sorted, processed and placed directly into the awaiting urn, drastically reducing the need for operator assistance and improving clean room best practices. Specification Length: 1080mm Width: 610mm Height: 1219mm Weight: 236Kg Power: 110V /60 Hz /30 AMPS Dust Control: Yes Warranty: 1 Year Limited Loading port in remains sorting tray: Processor to urn in 1 simple step: BL499 <BL199 Coolers >

10 Human Cremation 9 Body Coolers For the customer who wants a quality unit with no worries about on site assembly, Addfield provides a pre-assembled 1, 2 or 3 body cooler unit. It is manufactured and assembled using the same high standard quality controls as our machines it is shipped completley assembled, ready for electrical hook-up on site. Walk-In Cooler (below left) Assembled on site Part Number: AD002BC Specifications Walk-In Cooler [AD002BC] Length 230mm Width 1000mm Height 1700mm Shelf width 730mm Shelf length 1800mm We can also supply oversize body coolers. Please ask for further details Three Body Cooler ( below right) Pre-assembled Part Number: AD003BC <BL449 Cooler Shelves >

11 Human Cremation 10 Coolers Accessories 1/2 Nylon Backboard Part Number: AD001BCBB For use with the three body cooler, it provides a platform for caskets and trays. Stainless Steel Body Tray Part Number: AD001BCST Constructed from 18 gauge stainless steel with a smooth finsh, all of the edges have been rolled and it is welded for extra strength. Inside a three body cooler (right). Roller shelving is provided with the three body cooler for easy one man operation (below right). < Coolers Storm Collars >

12 Human Cremation 11 Storm Collar Part Number: AD001SC Storm collars dispense rain. They are mounted on the roof where the crematory stack comes out. The storm collar weather proofs the installation while allowing hot air associated with the exhaust stack to escape to the outside. They are available in glavanised or stainless steel, made to order to fit any stack diameter. The storm collar is a two piece item and it is easy to install and secure. A high temperature sealant is required for water proofing. Roof Thimble Part Number: AD002SC The roof thimble, like the storm collar weather proofs the installation. They are custom built to suit roof pitch and stack diameter. It is constructed from 16 gauge galvanized steel. <Cooler Shelves Cleaning Equipment >

13 Human Cremation 12 Cleaning Equipment Our vacuum is a heavy duty high powered vacuum to clean up after cremations and keep your work area dust free. Specfically designed for purpose, this vacuum also has a heat resistant bag and a flame resistant filter. Our steel clean-out brush and rakes enables you to carefully remove all of the cremated remains in your cremation chamber without scraping and damaging the hearth and therefore extending the machines useful life. The steel bristled brush is removable allowing you to change the size of the brush head or replaceing your old one when worn. Available in Large : Brush: 12' with 12" head. Rake: 12 with 10 head. Medium: Brush: 9' with 10" head. Rake: 12 with 10 head. Small: Brush: 5' with 6" head. Rake 5' with 10 head. <Storm Collars