BLANK

Transcription

1

2 BLANK

3

4

5

6

7

8

9

10

11

12 D-Flex and D-Flex Microporous (DC-4. GHz.) High Temperature / High Frequency Semi-igid eplacement for.47,.86 and.141 sizes. Uses Standard Semi-igid Connectors. Connectors Available for D-Flex Series... DynaFlex Series 1 (DC-. GHz.) Suitable for all applications requiring a combination of excellent electrical performance and robust physical characteristics. Connectors Available for DynaFlex Series 1... DynaFlex Series 2 (DC-4. GHz.) Suitable for all applications where low attenuation or phase stability are the primary design concerns. Connectors Available for DynaFlex Series 2... DynaFlex Series 3 (DC-4. GHz.) Suitable for all applications where weight savings is the primary design concern with Static installations in Land, Sea, Mobile, and Airborne Platforms. Connectors Available for DynaFlex Series 3... DynaFlex Series 4 (DC-65. GHz.) Suitable for all dynamic flexure applications when excellent flexibility and small bending forces are required. Connectors Available for DynaFlex Series 4... Cable Assemblies Pages Cable Assembly Code Cable Assembly Tooling Engineering Notes Competitors Cross eference The most commonly used Cables in the F Industry crossed to Dynawave Cable part numbers. 2 Table of Contents

13 D-Flex Cable Series D-Flex Series D-Flex Microporous Series DC - 4 GHz. Application & Product Features The D-Flex and D-Flex Microporous Series replace semi-rigid cable with a flexible equivalent while eliminating the need for three dimensional drawings, thereby simplifying the manufacturing processes and reducing cost. Both cable types provide easy solder termination to all (.47,.86, and TM.141) semi-rigid connectors. The D-Flex Series is equivalent to the popular *TFlex cable types with solid PTFE cores and the new D-Flex Microporous Series offers extended operational frequencies and temperature ranges by utilizing DynaCore PTFE Dielectric Technology. Suitable for all semi-rigid applications where cost savings is a concern. Component interconnections inside drawers, cabinets and enclosures. Military Defense systems, Medical systems, Telecommunication systems, Commercial antennas and Sub systems. Medical MI applications (D-Flex Microporous) when mating to non-magnetic connectors. Frequency range to 4 GHz. Shielding effectiveness >1 db Flexure life >1, cycles at 5x minimum bend radius. w w w. d y n a w a v e c a b l e. c o m

14 s with Cable Characteristics D-Flex D-Flex Microporous D-Flex s DX86 DX141 DXM47 DXM86 DXM141 Impedance (ohms) Velocity of Propagation (%) Min. Shield Effectiveness (db) Phase vs. Flexure Phase vs. Temperature Min. breakdown Voltage (KV) Capacitance (pf / ft.) Inductance (nh / ft.) Max. Operating Frequency (GHz.) Max. Structural VSW Max. Temperature (Deg. C ) Operating Temperature (Deg. C ) Jacket (in.) Second Shield O.D. (in.) First Shield O.D. (in.) Dielectric O.D. (in.) Solid Center Conductor O.D. (in.) Inside Min. Bend adius (in.) Flexure Life (5x Min. Bend adius) Weight (lbs. / ft.) : 1-45 / / >1, >1, See Graph (Pg. 5) See Graph (Pg. 5) -65 / : * : See Graph (Pg. 5) See Graph (Pg. 5) : 1-65 / +2 Cable Construction & Specifi cations : 1 The D-Flex and D-Flex Microporous cable series come with high temperature ETFE jackets and fi ts all standard sized semi-rigid connectors for.47,.86 and.141 diameter cables. Non-magnetic constructions are available for all but the DXM47. D-Flex D-Flex Microporous Jacket : ETFE First Shield, Silver Plated Copper per ASTM B298 Center Conductor Silver Plated Copper Clad Steel Jacket : ETFE First Shield, Silver Plated Copper per ASTM B298 *DXM47- WOVEN BAID DXM141 & DXM86-HELICAL FOIL Center Conductor Silver Plated Copper per ASTM B298 (See Note) Second Shield Silver Plated Copper per ASTM B298 PTFE Dielectric Type F per ASTM D4894 and D4895 Second Shield Silver Plated Copper per ASTM B298 NOTE: DXM47 has a Silver Plated, Copper Clad Steel Center Conductor Dynacore Expanded PTFE Dielectric Type F per ASTM D4894 and D Specifications are subject to change without notice

15 Power, Attenuation & Phase Characteristics Power De-rating for Temp. & Altitude Power handling is specified for conditions at sea level and +25 degrees C. Use the de-rating chart to estimate average or peak power levels at other altitude or temperature conditions. For power ratings on cable assemblies see page 35. % of ated Power Temp. Altitude Altitude (1's ft) Temp. (Deg. C) GHz K1 K2 Attenuation (db/1 ft.) D-Flex D-Flex Microporous DX86 DX141 DXM47 DXM86 DXM Attenuation = (K1 * db/1 ft freq. (GHz.)) + (K2 * freq. (GHz.)) Attenuation vs Frequency DX86 DX GHz. GHz db/1 ft Average Power ating (K Watts) D-Flex D-Flex Microporous DX86 DX141 DXM47 DXM86 DXM Attenuation vs Frequency DXM47 DXM86 DXM GHz. K Watts Power vs Frequency DX86 DX GHz. K Watts Power vs Frequency DXM47 DXM86 DXM GHz. Phase vs Temperature Phase vs Flexure D-Flex (microporous) D-Flex Temp. (Deg. C) Specifications are subject to change without notice Phase Change (+/- Deg.) (See Eng. Note 1 on page 36) Phase Change (+/- Deg.) Phase change with 36 degree loop at the minimum bend radius 47 Size 86 & 141 Sizes 1 GHz

16 Connector Specifi cations Dynawave connectors offer the best combination of price and performance. All connectors meet or exceed MIL-PF-3912 or MIL-STD-348 interface requirements and employ corrosion resistant stainless steel bodies, PTFE insulators, silicone gasket seals and gold plated BeCu contacts. These connectors utilize precision interfaces designed for greater than mating cycles without performance degradation. Connector Selection * Cable Type DX86 DX141 DXM47 DXM86 DXM141 SMP, Jack, Straight SMPM, Jack, Straight SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DX DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM DM * We also offer the Design and Manufacture of Special Connectors to meet your requirements 6

17 DYNAWAVE Cable Assembly Specifi cations See page 34 to determine a Code for your requirement, or contact our factory for custom cable assemblies tailored to your specifications. Our 1% tested and factory certifi ed assemblies are manufactured with semi-automated assembly methods and statistical process controls. In addition, all soldering operations are IPC/WHMA-A-62 or IPC-J-STD-1 certifi ed. This produces consistent, predictable products that protect signal integrity and ensures excellent transmission quality every time. Several variations of standard connector interfaces are available for this cable series. In addition, a rugged strain relief at the cable/connector junction comes standard to improve the dependability of these assemblies. Available jacket types for this cable are listed below with specifi c mechanical performance attributes. listed on page 34. High Temperature (H): Blue ETFE jacket with the highest available temperture rating. Basic Cable Assembly Configuration : LENGTH LENGTH LENGTH DYNAWAVE DYNAWAVE DYNAWAVE DYNAWAVE Standard Electrical Testing includes VSW and Insertion Loss. Cable Assembly Electrical Specifications Cable Assembly VSW Matrix Standard Testing (1%) Max. Assembly VSW Max. Assembly Insertion Loss See VSW Matrix Loss Calculator in Appendix (refer to page 8) DC - 4 GHz. Connector End 1 Straight (Plug or Jack) ight Angle (Plug) Straight (Plug or Jack) 1.35 : 18 GHz. 1.4 : 26 GHz : 4 GHz. 1.4 : 18 GHz : 26 GHz. 1. : 4 GHz. Connector End 2 ight Angle (Plug) 1.4 : 18 GHz : 26 GHz. 1. : 4 GHz : 18 GHz. 1. : 26 GHz. 1.6 : 4 GHz. Specifications are subject to change without notice 7

18 Loss Calculations Freq. (GHz.) K1 K2 D-Flex (db/in.) D-Flex Microporous (db/in.) Connector Loss (db) Mismatch Loss DX86 DX141 DXM47 DXM86 DXM141 Straight t. Angle VSW Loss (db) Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Max. Assembly Loss = (Cable Loss) +(Connector #1 Loss + Connector #2 Loss) + (Mismatch Loss) Example : 37 inch long Cable Assembly, DX86 cable, with one straight and one right angle connector. Freq. = 12. GHz., VSW = 1.2 : 1. Insertion Loss = (37 x.694) + ( ) + (.4) = 2.777dB. Cross eference by Dynawave Cross eference by Competitors Dynawave Cable 8 DX86 DX86 DX86 DX86 DX141 DX141 DX141 DX141 DXM47 DXM47 DXM47 DXM86 DXM86 DXM86 DXM86 DXM141 Competitors Harbour SS45 Semfl ex SM45 Storm Products Storm Flex 86 Times Microwave Tfl ex 45 Harbour SS42 Semfl ex SM42 Storm Products Storm Flex 141 Times Microwave Tfl ex 42 Micro Coax UGN7D Semfl ex SW6 Storm Products Storm Flex 47 Insulated Wire 1151 Insulated Wire 1251 Micro Coax UFF92D Semfl ex SW86 Semfl ex SW1 Competitors Harbour SS45 Harbour SS42 Insulated Wire 1151 Insulated Wire 1251 Micro Coax UGN7D Micro Coax UFF92D Semfl ex SM45 Semfl ex SM42 Semfl ex SW6 Semfl ex SW86 Semfl ex SW1 Storm Products Storm Flex 47 Storm Products Storm Flex 86 Storm Products Storm Flex 141 Times Microwave Tfl ex 45 Times Microwave Tfl ex 42 Dynawave Cable DX86 DX141 DXM86 DXM86 DXM47 DXM86 DX86 DX141 DXM47 DXM86 DXM141 DXM47 DX86 DX141 DX86 DX141 Specifications are subject to change without notice

19 DynaFlex Cable Series Series DF1 DC - GHz. Application & Product Features This is Dynawave s best all around F/Microwave interconnect cable series, balancing great electrical performance with resilient mechanical properties. The series DF1 also features the low density DynaCore PTFE dielectric with a robust tri-shield construction. The use of two woven braids with a wrapped foil provides resistance to damage from axial torque and rough handling. This also results in stable electrical performance and extended service in harsh physical environments. This series is suitable in Static applications on Land, Sea, Mobile and Airborne Platforms. Suitable for all applications requiring a combination of excellent electrical performance and robust physical characteristics. Static installations on Land, Sea, Mobile and Airborne Platforms. Indoor and outdoor installations with exposure to sand, dust, sunlight, moisture, shock and vibration. High volume Test & Measurement applications. Frequency ranges up to GHz. Maximum temperature range -65 C to +2 C (dependent on outer jacket option). Shielding effectiveness >9 db. Flexure life 1, cycles at 5x minimum bend radius. Applications requiring higher flexure life see Series 4. Electronic Counter Measures, Electronic Warfare Systems, Mobile Military Communications Systems & Satellite Communication. w w w. d y n a w a v e c a b l e. c o m

20 s with Cable Characteristics DynaFlex High Temperature Weatherized DF118 DF126 DF1 DF118W DF126W W DF1W Impedance (ohms) Velocity of Propagation (%) Min. Shield Effectiveness (db) Phase vs. Flexure Phase vs. Temperature Min. breakdown Voltage (KV) Capacitance (pf / ft.) Inductance (nh / ft.) Max. Operating Frequency (GHz.) Max. Structural VSW Max. Temperature (Deg. C ) Operating Temperature (Deg. C ) Jacket (in.) Third Shield O.D. (in.) Second Shield O.D. (in.) First Shield O.D. (in.) Dielectric O.D. (in.) Solid Center Conductor O.D. (in.) Inside Min. Bend adius (in.) Flexure Life (5x Min. Bend adius) Weight (lbs. / ft.) See Graph (Pg. 11) See Graph (Pg. 11) See Graph (Pg. 11) See Graph (Pg. 11) : : : : : : : 1-65 / / / / >1, >1, : Cable Construction & Specifi cations DynaFlex 1 Series cables offer an optional polyurethane jacket for excellent UV resistance in outdoor installations or for low smoke, halogen free jacket requirements. Solid center conductors contribute to better attenuation performance and are best suited for applications requiring less than 1, fl exures. (For Applications requiring Higher Flexure Life see Series 4). Jacket Options, High Temp. (H) : ETFE Weatherized (W) : Polyurethane First Shield, Silver Plated Copper per ASTM B298 Center Conductor Silver Plated Copper per ASTM B298 1 Third Shield, Silver Plated Copper per ASTM B298 Dynacore Expanded PTFE Dielectric Type F per ASTM D4894 and D4895 Second Shield High Temp. Aluminum Polyimide Foil Specifications are subject to change without notice

21 Power, Attenuation & Phase Characteristics Power handling is specified for conditions at sea level and +25 degrees C. Use the de-rating chart to estimate average or peak power levels at other altitude or temperature conditions. For power ratings on cable assemblies see page 35. Power De-rating for Temp. & Altitude GHz Average Power ating (K Watts) DF118 DF126 DF Power vs Frequency % of ated Power Temp. Altitude Altitude (1's ft) / Temp. (Deg. C) K Watts DF118 DF126 DF GHz. db / 1 ft Attenuation vs Frequency DF118 DF126 DF GHz. Phase vs Temperature GHz K1 K2 Attenuation (db/1 ft.) DF118 DF126 DF Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Phase vs Flexure Deg. C Specifications are subject to change without notice Phase Change (ppm) (See Eng. Note 1 on page 36) Phase Change (+/- Deg.) Phase change with 36 degree loop at the min. bend radius GHz. 11

22 Connector Specifi cations Dynawave connectors offer the best combination of price and performance. All connectors meet or exceed MIL-PF-3912 or MIL-STD-348 interface requirements and employ corrosion resistant stainless steel bodies, PTFE insulators, silicone gasket seals and gold plated BeCu contacts. These connectors utilize precision interfaces designed for greater then mating cycles without performance degradation. Connector Selection * Cable Type DF118 DF126 DF1 SMP, Jack, Straight SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H-624 Weatherized Connector Selection * 2-1H H H H H H H H H H-624 Cable Type DF118W DF126W W DF1W SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W-624 * We also offer the Design and Manufacture of Special Connectors to meet your requirements 12

23 DYNAWAVE Cable Assembly Specifi cations See page 34 to determine a Code for your requirement, or contact our factory for custom cable assemblies tailored to your specifications. Our 1% tested and factory certifi ed assemblies are manufactured with semi-automated assembly methods and statistical process controls. In addition, all soldering operations are IPC/WHMA-A-62 or IPC-J-STD-1 certifi ed. This produces consistent, predictable products that protect signal integrity and ensures excellent transmission quality every time. Several variations of standard connector interfaces are available for this cable series. Weatherized (W) connector versions combine silicone seals and corrosion resistant stainless steel components to provide an impenetrable moisture barrier and long service life in outdoor installations. In addition, a rugged strain relief at the cable/connector junction comes standard to improve the dependability of these assemblies.. HIGH. WEATHEIZED Available jacket types for this cable are listed below with specifi c mechanical performance. UGGEDIZED. AMOED TEMPEATUE (H): Grey ETFE jacket with the highest available temperture rating. (Flame esistance and Low Smoke rating = UL94 V-) (W): Black polyurethane jacket with a lower temperture rating but improved fl exibility, high UV resistance and moisture sealed connectors. (Zero Halogen, Flame esistance and Low Smoke rating = UL94 V-). (): UltraFlex, stainless steel, interlocked casing with blue polyurethane jacket. This combines crush resistance with fl exibility and light weight. (A): Seamless, stainless steel, corrugated tube with stainless steel braid and black polyurethane jacket. This produces the highest crush resistance, torque resistance and tensile strength of all jacket options, but sacrifi ces fl exibility. Basic Cable Assembly Configuration : LENGTH LENGTH LENGTH DYNAWAVE DYNAWAVE DYNAWAVE DYNAWAVE Standard Electrical Testing includes VSW and Insertion Loss. Testing for other performance parameters such as phase and amplitude matching or special environmental conditions is available upon request. Standard Testing (1%) Optional Test (as required) Cable Assembly Electrical Specifications Specifications are subject to change without notice Max. Assembly VSW Max. Assembly Insertion Loss Phase Matching Phase Tracking See VSW Matrix Loss Calculator in Appendix (refer to page 14) < +/-.5 Deg. / GHz. < +/-.1 Deg. / GHz. / ft. Insertion Loss Matching + / - 3% DC - GHz. Connector End 1 Straight (Plug or Jack) ight Angle (Plug) Cable Assembly VSW Matrix Straight (Plug or Jack) 1.3 : 18 GHz : 26 GHz. 1.4 : GHz : 18 GHz. 1.4 : 26 GHz : GHz. Connector End 2 ight Angle (Plug) 1.35 : 18 GHz. 1.4 : 26 GHz : GHz. 1.4 : 18 GHz : 26 GHz. 1. : GHz. 13

24 Freq. (GHz.) K1 K2 Cable Loss (db / in.) Loss Calculations Connector Loss (db) Mismatch Loss DF118 DF126 DF1 Straight t. Angle VSW Loss (db) Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Max. Assembly Loss = (Cable Loss) + (Connector #1 Loss + Connector #2 Loss) + (Mismatch Loss) Example : 37 inch long Cable Assembly, DF126 cable, with one straight and one right angle connector. Freq. = 12. GHz., VSW = 1.2 : 1. Insertion Loss = (37 x.268) + ( ) + (.4) = 1.26 db. Cross eference by Dynawave Cross eference by Competitors Dynawave Cable 14 DF118 DF118 DF118 DF126 DF126 DF126 DF126 DF1 DF1 DF1 DF1 DF1 DF1 Competitors Harbour LL393-2 Semflex HP35s Storm Products True Blue 29 Micro Coax UFA21A Semflex HP19s Storm Products True Blue 25 Tensolite 31 Harbour LL142 Harbour LL21 Insulated Wire 161 Micro Coax UFA147A Semflex HP16s Tensolite TLL4-113A Tensolite 4 Harbour LL12 Insulated Wire 141 Micro Coax UFA125A Semflex HP12s Storm Products True Blue 125 Tensolite TLL4-1111A Competitors Harbour LL393-2 Harbour LL142 Harbour LL21 Harbour LL12 Insulated Wire 141 Insulated Wire 161 Micro Coax UFA21A Micro Coax UFA147A Micro Coax UFA125A Semflex HP35s Semflex HP19s Semflex HP16s Semflex HP12s Storm Products True Blue 29 Storm Products True Blue 25 Storm Products True Blue 125 Tensolite 31 Tensolite 4 Tensolite TLL4-113A Tensolite TLL4-1111A Dynawave Cable DF118 DF1 DF1 DF126 DF1 DF118 DF126 DF1 DF118 DF126 DF1 DF126 DF1 Specifications are subject to change without notice

25 DynaFlex Cable Series Series DF2 DC - 4 GHz. Application & Product Features This is Dynawave s Electrically Optimized F/Microwave interconnect cable series. The Series DF2 also features a wrapped foil inner shield that minimizes attenuation and greatly improves phase stability with flexure. In addition, the ultra low density DynaCore PTFE dielectric improves phase over temperature. This type of construction offers excellent electrical performance where ultra low attenuation or phase stability is required. If the application involves radial torque forces that are greater than 15 lb-in additional armor protection would be recommended. Suitable for all applications where low attenuation or phase stability are the primary design concerns. Static installations on Land, Sea, Mobile and Airborne Platforms. Indoor and outdoor installations with exposure to sand, dust, sunlight and moisture. Excellent for applications in adar Systems, Phase Array Antennas and Test & Measurement Systems. Frequency ranges up to 4 GHz. Maximum temperature range -65 C to +2 C (dependent on outer jacket option). Shielding effectiveness >1 db. Flexure life >1, cycles at 5x minimum bend radius. w w w. d y n a w a v e c a b l e. c o m

26 s with Cable Characteristics DynaFlex High Temperature Weatherized W W W Impedance (ohms) Velocity of Propagation (%) Min. Shield Effectiveness (db) Phase vs. Flexure Phase vs. Temperature Min. breakdown Voltage (KV) Capacitance (pf / ft.) Inductance (nh / ft.) Max. Operating Frequency (GHz.) See Graph (Pg. 17) See Graph (Pg. 17) See Graph (Pg. 17) See Graph (Pg. 17) Max. Structural VSW Max. Temperature (Deg. C ) Operating Temperature (Deg. C ) 1.25 : : 1-65 / / : : : 1-65 / / : 1 Jacket (in.) Second Shield O.D. (in.) First Shield O.D. (in.) Dielectric O.D. (in.) Solid Center Conductor O.D. (in.) Inside Min. Bend adius (in.) Flexure Life (5x Min. Bend adius) >1, >1, Weight (lbs. / ft.) Cable Construction & Specifi cations DynaFlex Series 2 cables offer an optional polyurethane jacket for excellent UV resistance in outdoor installations or for low smoke, halogen free jacket requirements. Solid center conductors contribute to better attenuation performance and are best suited for applications requiring up to 1, fl exures. It should be noted that DynaFlex Series is equivalent to Semflex LA29 or Times Microwave HF-29 cable types and fi ts all connectors designed for those two products. Jacket Options, High Temp. (H) : ETFE Weatherized (W) : Polyurethane First Shield, Silver Plated Copper per ASTM B298 Center Conductor Silver Plated Copper per ASTM B298 Second Shield, Silver Plated Copper per ASTM B298 DynaCore Expanded PTFE Dielectric Type F per ASTM D4894 and D Specifications are subject to change without notice

27 Power, Attenuation & Phase Characteristics Power handling is specified for conditions at sea level and +25 degrees C. Use the de-rating chart to estimate average or peak power levels at other altitude or temperature conditions. For power ratings on cable assemblies see page 35. Power De-rating for Temp. & Altitude GHz Average Power ating (K Watts) Power vs Frequency % of ated Power Temp. Altitude Altitude (1's ft.) / Temp. (Deg. C) K Watts GHz. Attenuation vs Frequency Attenuation (db/1 ft.) GHz. db/1 ft GHz K1 K Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Phase vs Temperature Phase vs Flexure Deg. C Specifications are subject to change without notice Phase Change (ppm) (See Eng. Note 1 on page 36) Phase Change (+/- Deg.) Phase change with 36 degree loop at the min. bend radius GHz. 17

28 18 Connector Specifi cations Dynawave connectors offer the best combination of price and performance. All connectors meet or exceed MIL-PF-3912 or MIL-STD-348 interface requirements and employ corrosion resistant stainless steel bodies, PTFE insulators, silicone gasket seals and gold plated BeCu contacts. These connectors utilize precision interfaces designed for greater than mating cycles without performance degradation. Connector Selection * Cable Type SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H-624 Weatherized Connector Selection * Cable Type W W W SMA, Plug, Straight W W-624 SMA, Plug, /A W W-624 SMA, Jack, Bulkhead W W mm, Plug, Straight 12-24W mm, Plug, /A W mm, Jack, Bulkhead W mm, Plug, Straight W W mm, Plug, /A W W mm, Jack, Bulkhead W W-624 TNC, Plug, Straight W W-624 TNC, Plug, /A W W-624 TNC, Jack, Bulkhead W W-624 N, Plug, Straight W W-624 N, Plug, /A W W-624 N, Jack, Bulkhead W W-624 SC, Plug, Straight W-624 SC, Plug, /A W-624 SC, Jack, Bulkhead W-624 * We also offer the Design and Manufacture of Special Connectors to meet your requirements

29 DYNAWAVE Cable Assembly Specifi cations See page 34 to determine a Code for your requirement, or contact our factory for custom cable assemblies tailored to your specifications. Our 1% tested and factory certifi ed assemblies are manufactured with semi-automated assembly methods and statistical process controls. In addition, all soldering operations are IPC/WHMA-A-62 or IPC-J-STD-1 certifi ed. This produces consistent, predictable products that protect signal integrity and ensures excellent transmission quality every time. Several variations of standard connector interfaces are available for this cable series. Weatherized (W) connector versions combine silicone seals and corrosion resistant stainless steel components to provide an impenetrable moisture barrier and long service life in outdoor installations. In addition, a rugged strain relief at the cable/connector junction comes standard to improves the dependability of these assemblies.. HIGH. WEATHEIZED Available jacket types for this cable are listed below with specifi c mechanical performance. UGGEDIZED. AMOED TEMPEATUE (H): Grey ETFE jacket with the highest available temperture rating. (Flame esistance and Low Smoke rating = UL94 V-) (W): Black polyurethane jacket with a lower temperture rating but improved fl exibility, high UV resistance and moisture sealed connectors. (Zero Halogen, Flame esistance and Low Smoke rating = UL94 V-). (): UltraFlex, stainless steel, interlocked casing with blue polyurethane jacket. This combines crush resistance with fl exibility and light weight. (A): Seamless, stainless steel, corrugated tube with stainless steel braid and black polyurethane jacket. This produces the highest crush resistance, torque resistance and tensile strength of all jacket options, but sacrifi ces fl exibility. Basic Cable Assembly Configuration : LENGTH LENGTH LENGTH DYNAWAVE DYNAWAVE DYNAWAVE DYNAWAVE Standard Electrical Testing includes VSW and Insertion Loss. Testing for other performance parameters such as phase and amplitude matching or special environmental conditions is available upon request. Standard Testing (1%) Optional Test (as required) Cable Assembly Electrical Specifications Specifications are subject to change without notice Max. Assembly VSW Max. Assembly Insertion Loss Phase Matching Phase Tracking See VSW Matrix Loss Calculator in Appendix (refer to page 2) < +/-.5 Deg. / GHz. < +/-.1 Deg. / GHz. / ft. Insertion Loss Matching + / - 3% DC - GHz. Connector End 1 Straight (Plug or Jack) ight Angle (Plug) Cable Assembly VSW Matrix Straight (Plug or Jack) 1.3 : 18 GHz : 26 GHz. 1.4 : GHz : 18 GHz. 1.4 : 26 GHz : GHz. Connector End 2 ight Angle (Plug) 1.35 : 18 GHz. 1.4 : 26 GHz : GHz. 1.4 : 18 GHz : 26 GHz. 1. : GHz. 19

30 Loss Calculations Freq. (GHz.) K1 K2 Cable Loss (db / in.) Connector Loss (db) Mismatch Loss Straight t. Angle VSW Loss (db) Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Max. Assembly Loss = (Cable Loss) +(Connector #1 Loss + Connector #2 Loss) + (Mismatch Loss) Example : 37 inch long Cable Assembly, cable, with one straight and one right angle connector. Freq. = 12. GHz., VSW = 1.2 : 1. Insertion Loss = (37 x.212) + ( ) + (.4) =.9934 db. Cross eference by Dynawave Cross eference by Competitors Dynawave Cable 2 Competitors Harbour LL335 Insulated Wire 281 Micro Coax UFB293C Micro Coax UFB311A Semflex LA29 Times Microwave HF29 Times Microwave HF29s Harbour LL235 Insulated Wire 231 Micro Coax UFB197C Micro Coax UFB25A Times Microwave HF19 Times Microwave HF19s Insulated Wire 11 Insulated Wire 181 Micro Coax UFB142C Micro Coax UFB142A Times Microwave HF12 Times Microwave HF12s Competitors Harbour LL335 Harbour LL235 Insulated Wire 281 Insulated Wire 231 Insulated Wire 11 Insulated Wire 181 Micro Coax UFB293C Micro Coax UFB311A Micro Coax UFB197C Micro Coax UFB25A Micro Coax UFB142C Micro Coax UFB142A Semflex LA29 Times Microwave HF29 Times Microwave HF29s Times Microwave HF19 Times Microwave HF19s Times Microwave HF12 Times Microwave HF12s Dynawave Cable Specifications are subject to change without notice

31 DynaFlex Cable Series Series DF3 DC - 4 GHz. Application & Product Features This is Dynawave s best Light Weight F/Microwave interconnect cable series. Weight savings can be as much as 4% when compared to standard cables. The Series DF3 also features the ultra low density DynaCore PTFE dielectric and special light weight conductors which contribute to this series weight savings. A wrapped foil inner shield minimizes attenuation and makes the Series DF3 suitable for applications on Land, Sea, Mobile and Airborne Platforms in Static installations with radial torque forces less than 15 lb-in. Suitable for all applications where weight savings are the primary design concerns. Static installations on Land, Sea, Mobile and Airborne Platforms. Indoor and outdoor installations with exposure to sand, dust, sunlight and moisture. ecommended for Airframe, Antenna and Mobile Communication Systems Applications. Frequency ranges up to 4 GHz. Maximum temperature range -65 C to + 2 C (dependent on outer jacket option). Shielding effectiveness >1 db. Flexure life >1, cycles at 5x minimum bend radius. w w w. d y n a w a v e c a b l e. c o m

32 s with Cable Characteristics DynaFlex High Temperature DF318 DF326 DF34 Impedance (ohms) Velocity of Propagation (%) Min. Shield Effectiveness (db) Phase vs. Flexure Phase vs. Temperature Min. breakdown Voltage (KV) Capacitance (pf / ft.) Inductance (nh / ft.) Max. Operating Frequency (GHz.) Max. Structural VSW Max. Temperature (Deg. C ) Operating Temperature (Deg. C ) Jacket (in.) Second Shield O.D. (in.) First Shield O.D. (in.) Dielectric O.D. (in.) Solid Center Conductor O.D. (in.) Inside Min. Bend adius (in.) Flexure Life (5x Min. Bend adius) Weight (lbs. / ft.) : >1, See Graph (Pg. 23) See Graph (Pg. 23) : : 1-65 / / >1, >1,.3.1 Cable Construction & Specifi cations DynaFlex Series 3 cables incorporate silver plated, light weight conductors best suited for applications with less than 1, fl exures. Jacket Options, High Temp. : ETFE First Shield, Silver Plated Copper per ASTM B298 Solid Center Conductor Silver Plated Second Shield Silver Plated Dynacore Expanded PTFE Dielectric Type F per ASTM D4894 and D Specifications are subject to change without notice

33 Power, Attenuation & Phase Characteristics Power handling is specified for conditions at sea level and +25 degrees C. Use the de-rating chart to estimate average or peak power levels at other altitude or temperature conditions. For power ratings on cable assemblies see page 35. Power De-rating for Temp. & Altitude GHz Average Power ating (K Watts) DF318 DF326 DF Power vs Frequency % of ated Power Temp. Altitude Altitude (1's ft.) Temp. (Deg. C) K Watts DF318 DF326 DF GHz. Attenuation vs Frequency Attenuation (db/1 ft.) GHz. DF318 DF326 DF34 db/1 ft DF318 DF326 DF GHz K1 K Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Phase vs Temperature Phase vs Flexure Temp (Deg. C) Specifications are subject to change without notice Phase Change (+/- Deg.) (See Eng. Note 1 on page 36) Phase Change (+/- Deg.) Phase change with 36 degree loop at the min. bend radius GHz. 23

34 Connector Specifi cations Dynawave connectors offer the best combination of price and performance. All connectors meet or exceed MIL-PF-3912 or MIL-STD-348 interface requirements and employ corrosion resistant stainless steel bodies, PTFE insulators, silicone gasket seals and gold plated BeCu contacts. These connectors utilize precision interfaces designed for greater than mating cycles without performance degradation. Cable Type SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead Connector Selection * DF H H H H H H H H H H H H-624 DF H H H H H H H H H H H H-624 DF H H H H H H-624 * We also offer the Design and Manufacture of Special Connectors to meet your requirements 24

35 DYNAWAVE Cable Assembly Specifi cations See page 34 to determine a Code for your requirement, or contact our factory for custom cable assemblies tailored to your specifications. Our 1% tested and factory certifi ed assemblies are manufactured with semi-automated assembly methods and statistical process controls. In addition, all soldering operations are IPC/WHMA-A-62 or IPC-J-STD-1 certifi ed. This produces consistent, predictable products that protect signal integrity and ensures excellent transmission quality every time. Several variations of standard connector interfaces are available for this cable series. In addition, a rugged strain relief at the cable/connector junction comes standard to improve the dependability of these assemblies. Available jacket types for this cable are listed below with specifi c mechanical performance attributes listed on page 34.. HIGH TEMPEATUE (H): Grey ETFE jacket with the highest available temperture rating. (Flame esistance and Low Smoke ating = UL94 V-). Basic Cable Assembly Configuration : LENGTH LENGTH LENGTH DYNAWAVE DYNAWAVE DYNAWAVE DYNAWAVE Standard Electrical Testing includes VSW and Insertion Loss. Testing for other performance parameters such as phase and amplitude matching or special environmental conditions is available upon request. Cable Assembly Electrical Specifications Cable Assembly VSW Matrix Standard Testing (1%) Optional Test (as required) Max. Assembly VSW Max. Assembly Insertion Loss Phase Matching Phase Tracking See VSW Matrix Loss Calculator in Appendix (refer to page 26) < +/-.5 deg. / GHz. < +/-.1 deg. / GHz. / ft. Insertion Loss Matching + / - 3% DC - 4 GHz. Connector End 1 Straight (Plug or Jack) ight Angle (Plug) Straight (Plug or Jack) 1.3 : 18 GHz : 26 GHz. 1.4 : 4 GHz : 18 GHz. 1.4 : 26 GHz : 4 GHz. Connector End 2 ight Angle (Plug) 1.35 : 18 GHz. 1.4 : 26 GHz : 4 GHz. 1.4 : 18 GHz : 26 GHz. 1. : 4 GHz. Specifications are subject to change without notice 25

36 Loss Calculations Freq. (GHz.) K1 K2 Cable Loss (db / in.) Connector Loss (db) Mismatch Loss DF318 DF326 DF34 Straight t. Angle VSW Loss (db) Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Max. Assembly Loss = (Cable Loss) +(Connector #1 Loss + Connector #2 Loss) + (Mismatch Loss) Example : 37 inch long Cable Assembly, DF326 cable, with one straight and one right angle connector. Freq. = 12. GHz., VSW = 1.2 : 1. Insertion Loss = (37 x.216) + ( ) + (.4) = 1.82 db. Cross eference by Dynawave Cross eference by Competitors Dynawave Cable DF318 DF326 DF34 Competitors Micro Coax MCJ311A Micro Coax MCJ25A Micro Coax MCJ142A Competitors Micro Coax MCJ142A Micro Coax MCJ25A Micro Coax MCJ311A Dynawave Cable DF34 DF326 DF Specifications are subject to change without notice

37 DynaFlex Cable Series Series DF4 DC - 65 GHz. Application & Product Features This is Dynawave s Extreme Flexure F/Microwave interconnect cable series. The Series DF4 balances great electrical performance with fi nely tuned physical properties for dynamic fl exure in applications requiring up to, cycles. This series also features the low density DynaCore PTFE dielectric. A proprietary tri-shield construction includes two woven braids and a wrapped conductive tape for additional shielding. The Series DF4 is suitable for applications on Land, Sea and Mobile Communication where Dynamic installations are required. Suitable for all Dynamic Flexure applications requiring repetitive and extreme bend forces. Dynamic installations on Land, Sea, Mobile and Airborne Platforms. Indoor and outdoor installations with exposure to sand, dust, sunlight and moisture. Excellent for applications in adar Systems, Phase Array Antennas and Test & Measurement Systems. Frequency ranges up to 65 GHz. Maximum temperature range -65 C to + 2 C (dependent on outer jacket option). Shielding effectiveness >9 db. Flexure life >, cycles at 5x minimum bend radius. ecommended for high volume testing, anechoic chambers and antennas requiring repetitive motion or adjustments. w w w. d y n a w a v e c a b l e. c o m

38 s with Cable Characteristics DynaFlex High Temperature Weatherized DF412 DF418 DF426 DF44 DF4 DF465 DF412W DF418W DF426W DF44W DF4W DF465W Impedance (ohms) Velocity of Propagation (%) Min. Shield Effectiveness (db) Phase vs. Flexure Phase vs. Temperature Min. breakdown Voltage (KV) Capacitance (pf / ft.) Inductance (nh / ft.) Max. Operating Frequency (GHz.) Max. Structural VSW Max. Temperature (Deg. C ) Operating Temperature (Deg. C ) Jacket (in.) Third Shield O.D. (in.) Second Shield O.D. (in.) First Shield O.D. (in.) Dielectric O.D. (in.) Stranded Center Cond. O.D. (in.) Inside Min. Bend adius (in.) Flexure Life (5x Min. Bend adius) Weight (lbs. / ft.) : See Graph (Pg. 29) See Graph (Pg. 29) : : :1-65 / / : >, : : : See Graph (Pg. 29) See Graph (Pg. 29) :1 1.25:1-65 / / >, : : Cable Construction & Specifi cations DynaFlex Series DF4 cables offer an optional polyurethane jacket for excellent UV resistance in outdoor installations or for low smoke, halogen free jacket requirements. Stranded center conductors contribute to better fl exibility and are best suited for applications requiring up to, fl exures. Jacket Options, High Temp. (H) : ETFE Weatherized (W) : Polyurethane First Shield, Silver Plated Copper per ASTM B298 Stranded Center Conductor Silver Plated Copper per ASTM B298 Third Shield, Silver Plated Copper per ASTM B298 Dynacore Expanded PTFE Dielectric Type F Second Shield Conductive PTFE Tape 28 Specifications are subject to change without notice

39 Power, Attenuation & Phase Characteristics Power handling is specified for conditions at sea level and +25 degrees C. Use the de-rating chart to estimate average or peak power levels at other altitude or temperature conditions. For power ratings on cable assemblies see page 35. Power De-rating for Temp. & Altitude GHz Average Power ating (K Watts) DF412 DF418 DF426 DF Power vs Frequency DF DF % of ated Power Temp. Altitude Altitude (1's ft.) Temp. (Deg. C) K Watts DF412 DF418 DF426 DF44 DF4 DF GHz. db / 1 ft Attenuation vs Frequency Phase vs Temperature DF412 DF418 DF426 DF44 DF4 DF GHz. GHz K1 K2 Attenuation (db/1 ft.) DF412 DF418 DF426 DF44 DF Attenuation = (K1 * freq. (GHz.)) + (K2 * freq. (GHz.)) Phase vs Flexure DF Specifications are subject to change without notice Phase Change (ppm) Deg. C (See Eng. Note 1 on page 36) Phase Change (+/- Deg.) Phasechange with 36 degree loop at the minimum bend radius GHz. 29

40 Connector Specifi cations Dynawave connectors offer the best combination of price and performance. All connectors meet or exceed MIL-PF-3912 or MIL-STD-348 interface requirements and employ corrosion resistant stainless steel bodies, PTFE insulators, silicone gasket seals and gold plated BeCu contacts. These connectors utilize precision interfaces designed for greater than mating cycles without performance degradation. Connector Selection * Cable Type SMP, Jack, Straight SMPM, Jack, Straight SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 1.85mm, Plug, Straight 1.85mm, Plug, /A 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead DF412 DF418 DF426 DF44 DF4 DF H H H H H H H H H H H H H H H H H H H H H H H H-62 Note: 1.85mm Connectors are available upon request H H H H H H H H H H H H H H H H H H-62 Weatherized Connector Selection * Cable Type DF412W DF418W DF426W DF44W 2-4H H H H H H H H H H-62 DF4W 3-465H H H H-62 See Note See Note H H H H H H-62 DF465W SMA, Plug, Straight SMA, Plug, /A SMA, Jack, Bulkhead 1.85mm, Plug, Straight 1.85mm, Plug, /A 2.4mm, Plug, Straight 2.4mm, Plug, /A 2.4mm, Jack, Bulkhead 2.92mm, Plug, Straight 2.92mm, Plug, /A 2.92mm, Jack, Bulkhead TNC, Plug, Straight TNC, Plug, /A TNC, Jack, Bulkhead N, Plug, Straight N, Plug, /A N, Jack, Bulkhead SC, Plug, Straight SC, Plug, /A SC, Jack, Bulkhead * We also offer the Design and Manufacture of Special Connectors to meet your requirements W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W-62 See Note See Note W W W W W W-62 3