SHELLSOL OMS. Shell Chemicals. Data Sheet. United States Canada. Product Name

Transcription

1 Shell Chemicals Data Sheet Product Name SHELLSOL OMS This product is manufactured at more than one production site. The sales specifications of these products are the same, some typical data however may differ. Click on the production site below to obtain the right datasheet: United States Canada 1

2 Data Sheet Product Name Product Code Issued: 22-Jul-2005 SHELLSOL OMS Q7432 North America Woodriver Product Category Isoparaffins CAS Registry Number EINECS Number Description Sales Specification SHELLSOL OMS is an isoparaffinic solvent that has been synthesized from selected hydrocarbons under conditions that exclude virtually all odor-producing fractions. The product is consequently highly stable and retains its virtually odorless quality under normal conditions and extended storage. Property Unit Min Max Method Appearance Cl & FFSM ASTM D4176 Color Saybolt 30 ASTM D156 Odor Pass ASTM D1296 C kg/m³ ASTM D4052 (1) Specific C ASTM D4052 (1) Copper Corrosion C) 1 ASTM D130 (1) Distillation, IBP C ASTM D86 Distillation, DP C ASTM D86 Aromatics % v/v 0.25 ASTM D3257 (1) Flash Point, TCC C 43.5 ASTM D56 Kauri-Butanol Value 29 ASTM D1133 (1) (1) Guaranteed, (2) Typical, (3) Report Only, (4) Guaranteed spec with typical result Product meets Federal Specification A-A-2904 Type III. Conformance to specification limits is determined in accordance with ASTM E29, Rounding-off Method. Product contains approximately 25 ppm BHT.

3 Typical Properties Test Methods Property Unit Method Value Color Saybolt ASTM D API Gravity - ASTM D C kg/l ASTM D Specific C - ASTM D Distillation, IBP C ASTM D Distillation, 50%v C ASTM D Distillation, DP C ASTM D Evaporation Time (nbuac=470sec) seconds ASTM D Relative Evaporation Rate - ASTM D (nbuac=1) Vapor C kpa Calculated 0.1 Paraffins %wt GC 96 Naphthenes %wt GC 4 Aromatics %v/v ASTM D3257 < 0.1 Benzene ppm GC < 1 Naphthalene % m/m GC < 0.1 Flash Point C ASTM D56 51 Auto Ignition Temperature C ASTM E VOC Content g/l ASTM D Aniline Point (M=Mixed) C ASTM D Kauri-Butanol Value - ASTM D Hildebrand Solubility Parameter (cal/cm³)^½ Hydrogen Bonding Index Fractional Polarity C cst ASTM D Molecular Weight g/mol Calculated 166 Copies of copyrighted test methods can be obtained from the issuing organisations: American Society for Testing and Materials (ASTM) : Energy Institute (IP) : Deutsches Institut für Normung (DIN) : Shell Method Series (SMS) methods are issued by Shell International Chemicals B.V., Shell Research and Technology Centre, Amsterdam, The Netherlands. Copies of SMS can be obtained through your local Shell Chemicals company. For routine quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through your local Shell Chemicals company. Quality SHELLSOL OMS meets the Federal specification A-A-2904, type III. SHELLSOL OMS does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

4 Storage and Handling Hazard Information Contact Warranty Provided proper storage and handling precautions are taken we would expect SHELLSOL OMS to be technically stable for at least 12 months. For detailed advice on Storage and Handling please refer to the Material Safety Data Sheet on For detailed Hazard Information please refer to the Material Safety Data Sheet on For further information, please visit our website at contact your local Shell representative, or call the 'Shell Chemicals' order center at SHELL ( ). All products purchased or supplied by Shell are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of lading. Shell warrants that its product will meet those specifications designated as such herein or in other publications. All other information including that herein, supplied by Shell is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shell makes no other warranty either expressed or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from use thereof; that any products shall be merchantable or fit for any purpose; or that the use of such other information or product will not infringe any patent. The expression Shell Chemicals refers to the companies of the Royal Dutch/Shell Group which are engaged in chemical businesses. Each of the companies which make up the Royal Dutch/Shell Group of companies is an independent entity and has its own separate identity. Trademark SHELLSOL is a Shell Trademark.

5 Data Sheet Product Name Product Code Issued: 22-Jul-2005 SHELLSOL OMS Q7432 North America Montreal Product Category Isoparaffins CAS Registry Number EINECS Number Description Sales Specification SHELLSOL OMS is an isoparaffinic solvent that has been synthesized from selected hydrocarbons under conditions that exclude virtually all odor-producing fractions. The product is consequently highly stable and retains its virtually odorless quality under normal conditions and extended storage. Property Unit Min Max Method Appearance Cl & FFSM ASTM D4176 Color Saybolt 30 ASTM D156 Odor Pass ASTM D1296 C kg/m³ ASTM D4052 (1) Specific C ASTM D4052 (1) Copper Corrosion C) 1 ASTM D130 (1) Distillation, IBP C ASTM D86 Distillation, DP C ASTM D86 Aromatics % v/v 0.25 ASTM D3257 (1) Flash Point, TCC C 43.5 ASTM D56 Kauri-Butanol Value 29 ASTM D1133 (1) (1) Guaranteed, (2) Typical, (3) Report Only, (4) Guaranteed spec with typical result Product meets Federal Specification A-A-2904 Type III. Conformance to specification limits is determined in accordance with ASTM E29, Rounding-off Method. Product contains approximately 25 ppm BHT.

6 Typical Properties Test Methods Property Unit Method Value Color Saybolt ASTM D API Gravity - ASTM D C kg/l ASTM D Distillation, IBP C ASTM D Distillation, 50%v C ASTM D Distillation, DP C ASTM D Evaporation Time (nbuac=470sec) seconds ASTM D Relative Evaporation Rate - ASTM D (nbuac=1) Vapor C kpa Calculated 0.1 Paraffins %wt GC 98 Naphthenes %wt GC 2 Aromatics %v/v ASTM D3257 < 0.1 Benzene ppm GC < 1 Flash Point C ASTM D56 51 Auto Ignition Temperature C ASTM E VOC Content g/l ASTM D Aniline Point (M=Mixed) C ASTM D Kauri-Butanol Value - ASTM D Hildebrand Solubility Parameter (cal/cm³)^½ Hydrogen Bonding Index Fractional Polarity C cst ASTM D Molecular Weight g/mol Calculated 166 Copies of copyrighted test methods can be obtained from the issuing organisations: American Society for Testing and Materials (ASTM) : Energy Institute (IP) : Deutsches Institut für Normung (DIN) : Shell Method Series (SMS) methods are issued by Shell International Chemicals B.V., Shell Research and Technology Centre, Amsterdam, The Netherlands. Copies of SMS can be obtained through your local Shell Chemicals company. For routine quality control analyses, local test methods may be applied that are different from those mentioned in this datasheet. Such methods have been validated and can be obtained through your local Shell Chemicals company. Quality SHELLSOL OMS meets Federal Specification A-A-2904, type III. SHELLSOL OMS does not contain detectable quantities of polycyclic aromatics, heavy metals or chlorinated compounds.

7 Storage and Handling Hazard Information Contact Warranty Provided proper storage and handling precautions are taken we would expect SHELLSOL OMS to be technically stable for at least 12 months. For detailed advice on Storage and Handling please refer to the Material Safety Data Sheet on For detailed Hazard Information please refer to the Material Safety Data Sheet on For further information, please visit our website at contact your local Shell representative, or call the 'Shell Chemicals' order center at SHELL ( ). All products purchased or supplied by Shell are subject to terms and conditions set out in the contract, order acknowledgment and/or bill of lading. Shell warrants that its product will meet those specifications designated as such herein or in other publications. All other information including that herein, supplied by Shell is considered accurate but is furnished upon the express condition that the customer shall make its own assessment to determine the products suitability for a particular purpose. Shell makes no other warranty either expressed or implied, regarding such other information, the data upon which the same is based, or the results to be obtained from use thereof; that any products shall be merchantable or fit for any purpose; or that the use of such other information or product will not infringe any patent. The expression Shell Chemicals refers to the companies of the Royal Dutch/Shell Group which are engaged in chemical businesses. Each of the companies which make up the Royal Dutch/Shell Group of companies is an independent entity and has its own separate identity. Trademark SHELLSOL is a Shell Trademark.