Low Voltage Alternators - 4 pole. 10 to 3300 kva - 50 Hz / 12.5 to 3900 kva - 60 Hz General features and ratings
|
|
|
- Terence Burns
- 7 years ago
- Views:
Transcription
1 - 10 to 3300 kva - 50 Hz / 12.5 to 3900 kva - 60 Hz General features and ratings
2 Summary 1 - RATING DEFINITION INSULATION CLASS AND TEMPERATURE RISE DERATING WINDING GENERAL FEATURES Compliance with internationally recognized standards Electrical features Mechanical features ACCESSORIES AND OPTIONS PRODUCT DESCRIPTION CONNECTIONS 50Hz Standard winding 6 (rating: V / V) Standard winding 6 (rating: 220 / 440 V) Standard winding 6-12 wires option (rating: V / V) Standard winding 6-12 wires option (rating: 220 / 440 V) Specific winding 7-12 wires option (rating: / / V) Specific winding 7 - (rating: / / V) Specific winding 9 or 22 (rating: V) Specific winding 22 or 23 (rating: 550 V) Specific winding 22 or 23 (rating: 600 V) Specific winding 10 or 52 (rating: V) Standard winding 6 (rating - 1 ph: 220 V) Dedicated winding M (rating - 1 ph: 115 / 230 V) CONNECTIONS 60Hz Standard winding 6 (rating: V / / V) Standard winding 6 (rating: V / / V) Standard winding 6-12 wires (rating: V / / V) Standard winding 6-12 wires (rating: V / / V) Specific winding 8 (rating: V / / V) Specific winding 9 (rating 60 Hz: 347 V / 600 V) Specific winding 22 or 23 (rating: V) Standard winding 6 (rating - 1 ph: 240 V) Dedicated winding M or M1 (rating - 1 ph: 120 / 240 V) Electric Power Generation
3 Technical definitions INTRODUCTION - This catalogue is a summary of ratings for the range at the most common voltages around the world. For other voltages, please consult LEROY-SOMER. 1 - RATING DEFINITION Continuous rating S1/ 40 C - IEC definition - Running at constant load limited to the insulation class ; permissible overload 1 h every 12 hours. Stand-by rating 40 C - Running at constant load without over load, for a limited duration of maximum 500h/year, with a permissible increase of the temperature rise above class H. Stand-by rating 27 C - Same conditions than stand-by duty 40 C but with acceptance of a lower ambient temperature (27 C) that allows to increase the rating and the temperature rise for the same level of temperature in the alternator. ex: S1/40 C = 100 kw - std by/40 C = 105 kw - std by/27 C = 110 kw 2 - INSULATION CLASS AND TEMPERATURE RISE c Example : Insulation, class H B 80 K 100 K F 105 K H 125 K 105 K Ambiant temperature Nominal value class B = nominal value class H x 0.8 Maximum acceptable temperature Winding temperature at lower rating Temperature rise class F A thermal reserve ensures a long life for the machine 3 - DERATING Multiply nominal rating by derating factor from following chart. Ambiant temperature ALTITUDE 25 C 45 C 50 C 55 C 60 C (*) 0 to 1000 m to 1500 m to 2000 m to 2500 m to 3000 m Power factor Lagging Power Factor Factor (*) External A.V.R. if 56 C Electric Power Generation 3
4 Technical definitions 4 - WINDINGS LEROY SOMER proposes various 2/3 pitch windings for rating optimisation according to the required voltage and frequency. - Standard winding N : 6 - Optimized winding N : 7, 8, 9, 10, 22, 23 and Windings M or M1, dedicated single phase windings. S after the winding number means 6 leads ex : 6S. T or + after winding give an information about the saturation level of the stator. 5 - GENERAL FEATURES COMPLIANCE WITH INTERNATIONALLY RECOGNIZED STANDARDS 4 Pole Alternators are in compliance to the main international standards and regulations : - IEC 60034, NEMA MG , ISO 8528/3, CSA, UL 1446, UL 1004 on request and depending on voltages, marine regulations, etc. It can be integrated into a CE marked generator. Alternators are designed, manufactured and marketed in an ISO 9001 and ISO environments ELECTRICAL FEATURES - Excitation Systems : Short circuit capacity LEROY-SOMER propose a large choice of excitation systems, depending on the customer needs : - SHUNT system, without short-circuit capacity. - AREP, PMG, with a short-circuit capacity of 3 times the nominal current for 10 seconds. - Voltage regulators : 4 Pole Alternators are fitted with reliable and performant AVR s, adapted to LS excitation systems, powered by transistors and fulfilling perfect regulation. Available excitation systems depending on alternator frames, are indicated in rating tables. Alternators LSA SHUNT R 220 R 220 R 250 R 250 R Shunt dedicated 1 phase R 220 R 220 R AREP / PMG R 438* R 438* R 438* R 450M R 450 R 450M R 450 D510C R 449 R 449 SHUNT / AREP / PMG D510C** D510C** D510C** D510C** D510C** D510C** D510C** D510C D510C** D510C** * AREP only. - ** Option. - Frequency : 4 Pole alternators may operate either 50 or 60 Hz. The standard winding (code 6) is suitable both for 50 and 60 Hz. For dedicated windings, see specific table or consult factory. - Power factor : 4 Pole alternators are designed to operate between 0.8 and 1 power factor. A derating is necessary below 0.8 power factor (see derating chart). - Waveform : Total harmonic distorsion (THD), at no load or linear load is less than 5% according to IEC. TIF/Telephone influence factor according to NEMA is less than Transient features : Transient voltage dip for rated step load at 0.8 power factor is less than 18 %. Recovery time for a 20 % transient voltage dip is less than 0.5 s. - Parallel operation : All 4 Pole alternators can operate in parallel with other alternators or with the mains, when they are equipped with the appropriate devices (AVR, current transformer...). - Overload acceptance : 4 Pole alternators can be overloaded according to NEMA - Single Phase operation : 4 Pole alternators from LSA 40 up to LSA 46.3 can be reconnected for single phase use. The single phase rating is given in the various alternator data sheets. Alternators from LSA 40 up to LSA 44.3 can be supplied with a dedicated single phase winding. (Code M or M1). 4 Electric Power Generation
5 Technical definitions - EMI suppression : All the alternators delivered to the European Community are provided with an EMI suppression device in accordance with EN 55011, group 1, class B. This equipment is optional for other areas MECHANICAL FEATURES - Forms : 4 Pole alternators can be provided in single bearing or two bearing configurations. A large range of engine adaptors and coupling discs are available to fit the major engines. - Enclosure : Standard enclosure is IP 23. Other enclosures such as IP 44, IP 55 can be proposed on request. - Bearings : Sealed for life bearings up to LSA 50.2 (regreasable bearing option from LSA 46.3), regreasable bearings for LSA Balancing : All the rotors are dynamically balanced according to ISO 1940 and NFC Two bearing rotors are balanced with a half key. - Direction of rotation : alternators can operate in both directions (5% derating for anticlockwise running for LSA 47.2, LSA 49.3 and LSA 50.2). - Overspeed : The maximum overspeed is 2250 min -1 (1.25 times the 60 Hz rated speed). - Insulation and protection : 4 Pole alternators are class H insulated. The standard winding protection can accept up to 95 % relative humidity and is suitable for indoors marine applications. Specific added coatings can be proposed for harsh environments. - Terminal box and connectors : 4 Pole alternators have a large terminal box which allows easy access for reconnection or to the AVR. Current transformers and other optional modules can be fitted within the box. - Mechanical structure : Steel frame. Aluminium, cast iron or steel housings and flanges depending on models. 6 - ACCESSORIES AND OPTIONS - Digital A.V.R. D 510C (includes three phase sensing and paralleling with the grid). - EMI suppression module R791 for other areas than EC. - PMG (from LSA 42.3). - Engine adaptors for two bearing alternators. - Air inlet filters (5% derating). - Air outlet filters or deflectors (5% derating). - Specific stator protections for harsh environments. - Specific painting. - Greasable bearings for LSA 46.3, LSA 47.2, LSA 49.3 and LSA Thermal protections for bearings. - Thermal protections for stator windings. - Anti condensation heaters (retrofitable). - Remote voltage potentiometers. - Current transformers for paralleling with other alternators. - First emergency kits (AVR + diodes). 7 - PRODUCT DESCRIPTION The machine name is defined according to various criteria (see below). Example of description for : LSA 49.3 M6 C6/4 LSA : Leroy-Somer Alternator 49.3 : Frame size M6 : Core length C : Excitation system (C: AREP / J: SHUNT or SHUNT + PMG) 6/4 : winding number / number of poles. Electric Power Generation 5
6 Voltage reconnections 8 - CONNECTIONS 50 Hz 4 POLE 50 Hz R.P.M. Phase - Code 3 ph - D 3 ph - F 3 ph - D 3 ph - F 3 ph - A 1 ph - FF 1 ph - G Connections star delta star delta parallel star double delta open delta Number of wire Standard Winding V (page 7/9) V (page 7/9) V (page 7/9) V (page 7/9) V (page 7/9) V (page 15) V (page 15) Standard Winding V (page 8) V (page 8) V (page 8) - - Specific Winding 7 (upon request) V (page 9/10) V (page 9/10) V (page 9/10) V (page 9/10) V (page 9/10) V (consult factory) V (consult factory) Specific Winding 9 or 22 (upon request) V (page 11) V (page 11) Specific Winding 22 or 23 (upon request) 550 V (page 12) 600 V (page 13) V (page 12) 600 V (page 13) Specific Winding 10 or 52 (upon request) V (page 14) V (page 14) Specific Winding M, dedicated 1 phase (upon request) SE (serie) 230 V (page 15) 115 V (page 15) PA (parallel) 6 Electric Power Generation
7 1500 R.P.M. - 3 Phase - P.F. 0.8 D Star RATINGS 50 Hz A Parallel Star (12 wires only) Delta V V V F Standard winding 6 kva : 190V. 220/380 V kva : 200V. 230/400 V kva : 208V. 240/415 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1 J6/4 C6/ LSA 40 VS2 J6/4 C6/ LSA 40 S3 J6/4 C6/ LSA 40 S4 J6/4 C6/ LSA 40 M5 J6/4 C6/ LSA 42.3 VS1 J6/4 C6/4 Option LSA 42.3 VS2 J6/4 C6/4 Option LSA 42.3 VS3 J6/4 C6/4 Option LSA 42.3 S4 J6/4 C6/4 Option LSA 42.3 S5 J6/4 C6/4 Option LSA 42.3 M7 J6/4 C6/4 Option LSA 42.3 M8 J6/4 C6/4 Option LSA 42.3 L9 J6/4 C6/4 Option LSA 44.3 S2 J6/4 C6/4 Option LSA 44.3 S3 J6/4 C6/4 Option LSA 44.3 S4 J6/4 C6/4 Option LSA 44.3 S5 J6/4 C6/4 Option LSA 44.3 M6* J6/4 C6/4 Option LSA 44.3 M8 J6/4 C6/4 Option LSA 44.3 L10* J6/4 C6/4 Option LSA 46.3 S2 J6/4 C6/4 Option LSA 46.3 S3* J6/4 C6/4 Option LSA 46.3 S4 J6/4 C6/4 Option LSA 46.3 S5 J6/4 C6/4 Option LSA 46.3 M7* J6/4 C6/4 Option LSA 46.3 M8* J6/4 C6/4 Option LSA 46.3 L10 J6/4 C6/4 Option LSA 46.3 L11 J6/4 C6/4 Option LSA 47.2 S4* J6/4 C6/4 Option LSA 47.2 S5* J6/4 C6/4 Option LSA 47.2 M7 J6/4 C6/4 Option LSA 47.2 M8 J6/4 C6/4 Option LSA 47.2 L9 J6/4 C6/4 Option LSA 47.2 L9** - C6S/4 Option LSA 49.3 S4 - C6S/4 Option LSA 49.3 M6 - C6S/4 Option LSA 49.3 M8 - C6S/4 Option LSA 49.3 L9 - C6S/4 Option LSA 49.3 L10 - C6S/4 Option LSA 50.2 M6 - C6S/4 Option LSA 50.2 L7*** - C6S/4 Option LSA 50.2 L8 - C6S/4 Option LSA 50.2 VL10 - C6S/4 Option LSA 52.3 S5 - C6S/4 Option LSA 52.3 S6 - C6S/4 Option LSA 52.3 S7 - C6S/4 Option LSA 52.3 L9 - C6S/4 Option LSA 52.3 L12 - C6S/4 Option LSA 53.2 M9 - C6S/4 Option LSA 53.2 M12 - C6S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. Electric Power Generation 7
8 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star A Parallel Star (12 wires only) 440 V (maximum voltage) 220 V (maximum voltage) Standard winding 6 kva : 220 V. 440 V (1) (1) Use winding 7 for parallel operation with the main. Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 40 VS1 J6/4 C6/ LSA 40 VS2 J6/4 C6/ LSA 40 S3 J6/4 C6/ LSA 40 S4 J6/4 C6/ LSA 40 M5 J6/4 C6/ LSA 42.3 VS1 J6/4 C6/4 Option LSA 42.3 VS2 J6/4 C6/4 Option LSA 42.3 VS3 J6/4 C6/4 Option LSA 42.3 S4 J6/4 C6/4 Option LSA 42.3 S5 J6/4 C6/4 Option LSA 42.3 M7 J6/4 C6/4 Option LSA 42.3 M8 J6/4 C6/4 Option LSA 42.3 L9 J6/4 C6/4 Option LSA 44.3 S2 J6/4 C6/4 Option LSA 44.3 S3 J6/4 C6/4 Option LSA 44.3 S4 J6/4 C6/4 Option LSA 44.3 S5 J6/4 C6/4 Option LSA 44.3 M6* J6/4 C6/4 Option LSA 44.3 M8 J6/4 C6/4 Option LSA 44.3 L10* J6/4 C6/4 Option LSA 46.3 S2 J6/4 C6/4 Option LSA 46.3 S3* J6/4 C6/4 Option LSA 46.3 S4 J6/4 C6/4 Option LSA 46.3 S5 J6/4 C6/4 Option LSA 46.3 M7* J6/4 C6/4 Option LSA 46.3 M8* J6/4 C6/4 Option LSA 46.3 L10 J6/4 C6/4 Option LSA 46.3 L11 J6/4 C6/4 Option LSA 47.2 S4* J6/4 C6/4 Option LSA 47.2 S5* J6/4 C6/4 Option LSA 47.2 M7 J6/4 C6/4 Option LSA 47.2 M8 J6/4 C6/4 Option LSA 47.2 L9 J6/4 C6/4 Option LSA 47.2 L9** - C6S/4 Option LSA 49.3 S4 - C6S/4 Option LSA 49.3 M6 - C6S/4 Option LSA 49.3 M8 - C6S/4 Option LSA 49.3 L9 - C6S/4 Option LSA 49.3 L10 - C6S/4 Option LSA 50.2 M6 - C6S/4 Option LSA 50.2 L7*** - C6S/4 Option LSA 50.2 L8 - C6S/4 Option LSA 50.2 VL10 - C6S/4 Option LSA 52.3 S5 - C6S/4 Option LSA 52.3 S6 - C6S/4 Option LSA 52.3 S7 - C6S/4 Option LSA 52.3 L9 - C6S/4 Option LSA 52.3 L12 - C6S/4 Option LSA 53.2 M9 - C6S/4 Option LSA 53.2 M12 - C6S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 8 Electric Power Generation
9 1500 R.P.M. - 3 Phase - P.F. 0.8 D Star RATINGS 50 Hz A Parallel Star (12 wires only) Delta V V V F Standard winding 6 kva : 190V. 220/380 V kva : 200V. 230 /400 V kva : 208V. 240/415 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K OPTION : 12 wires LSA 49.3 S4 - C6/4 Option LSA 49.3 M6 - C6/4 Option LSA 49.3 M8 - C6/4 Option LSA 49.3 L9 - C6/4 Option LSA 49.3 L10 - C6/4 Option LSA 50.2 M6 - C6/4 Option LSA 50.2 L8 - C6/4 Option R.P.M. - 3 Phase - P.F Standard winding 6 kva : 220 V. 440 V (1) Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K OPTION : 12 wires RATINGS 50 Hz D Star A Parallel Star (12 wires only) 440 V (maximum voltage) 220 V (maximum voltage) (1) Use winding 7 for parallel operation with the main. LSA 49.3 S4 - C6/4 Option LSA 49.3 M6 - C6/4 Option LSA 49.3 M8 - C6/4 Option LSA 49.3 L9 - C6/4 Option LSA 49.3 L10 - C6/4 Option LSA 50.2 M6 - C6/4 Option LSA 50.2 L8 - C6/4 Option R.P.M. - 3 Phase - P.F Specific winding 7 kva : 208V. 240/415 V kva : 220V. 254/440 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K OPTION : 12 wires RATINGS 50 Hz D Star A Parallel Star F (12 wires only) LSA 49.3 M6 - C7/4 Option LSA 49.3 M8 - C7/4 Option LSA 49.3 L9 - C7/4 Option LSA 49.3 L10 - C7/4 Option Delta V V V Electric Power Generation 9
10 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star A Parallel Star F (12 wires only) Delta V V V Specific winding 7 kva : 208V. 240/415 V kva : 220V. 254/440 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1* J7/4 C7/ LSA 40 VS2 J7/4 C7/ LSA 40 S3 J7/4 C7/ LSA 40 S4 J7/4 C7/ LSA 40 M5 J7/4 C7/ LSA 42.3 VS1 J7/4 C7/4 Option LSA 42.3 VS2 J7/4 C7/4 Option LSA 42.3 VS3 J7/4 C7/4 Option LSA 42.3 S4 J7/4 C7/4 Option LSA 42.3 S5 J7/4 C7/4 Option LSA 42.3 M7 J7/4 C7/4 Option LSA 42.3 M8 J7/4 C7/4 Option LSA 42.3 L9 J7/4 C7/4 Option LSA 44.3 S2 J7/4 C7/4 Option LSA 44.3 S3 J7/4 C7/4 Option LSA 44.3 S4* J7/4 C7/4 Option LSA 44.3 S5* J7/4 C7/4 Option LSA 44.3 M6 J7/4 C7/4 Option LSA 44.3 M8* J7/4 C7/4 Option LSA 44.3 L10 J7/4 C7/4 Option LSA 46.3 S2* J7/4 C7/4 Option LSA 46.3 S3 J7/4 C7/4 Option LSA 46.3 S4* J7/4 C7/4 Option LSA 46.3 S5* J7/4 C7/4 Option LSA 46.3 M7 J7/4 C7/4 Option LSA 46.3 M8 J7/4 C7/4 Option LSA 46.3 L10* J7/4 C7/4 Option LSA 46.3 L11* J7/4 C7/4 Option LSA 47.2 VS2 J7/4 C7/4 Option LSA 47.2 S4*** - C7S/4 Option LSA 47.2 S5*** - C7S/4 Option LSA 47.2 M7*** - C7TS/4 Option LSA 47.2 M8*** - C7S/4 Option LSA 47.2 L9 J7/4 C7/4 Option LSA 49.3 S4 - C7S/4 Option LSA 49.3 M6 - C7S/4 Option LSA 49.3 M8 - C7S/4 Option LSA 49.3 L9 - C7S/4 Option LSA 49.3 L10 - C7S/4 Option LSA 50.2 S4 - C7S/4 Option LSA 50.2 M6 - C7+S/4 Option LSA 50.2 L7 - C7S/4 Option LSA 50.2 L8*** - C7S/4 Option LSA 50.2 VL10 - C7S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 10 Electric Power Generation
11 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star V Specific winding 9 or 22 TS kva : 500 V kva : 525 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1 - C9/ LSA 40 VS2 - C9/ LSA 40 S3 - C9/ LSA 40 S4 - C9/ LSA 40 M5* - C9/ LSA 42.3 VS1 - C9/4 Option LSA 42.3 VS2 - C9/4 Option LSA 42.3 VS3 - C9/4 Option LSA 42.3 S4 - C9/4 Option LSA 42.3 S5 - C9/4 Option LSA 42.3 M7 - C9/4 Option LSA 42.3 M8 - C9/4 Option LSA 42.3 L9 - C9/4 Option LSA 44.3 S2* - C9/4 Option LSA 44.3 S3* - C9/4 Option LSA 44.3 S4* - C9/4 Option LSA 44.3 S5* - C9/4 Option LSA 44.3 M6 - C9/4 Option LSA 44.3 M8 - C9/4 Option LSA 44.3 L10* - C9/4 Option LSA 46.3 S2 - C9/4 Option LSA 46.3 S3 - C9S/4 Option LSA 46.3 S4 - C9S/4 Option LSA 46.3 S5 - C9S/4 Option LSA 46.3 M7 - C9/4 Option LSA 46.3 M8 - C9/4 Option LSA 46.3 L10 - C9S/4 Option LSA 46.3 L11 - C9S/4 Option LSA 47.2 VS2 - C9S/4 Option LSA 47.2 S4 - C9/4 Option LSA 47.2 S5 - C9/4 Option LSA 47.2 M7* - C9/4 Option LSA 47.2 M8* - C9+/4 Option LSA 47.2 L9 - C9+S/4 Option LSA 49.3 S4 - C9S/4 Option LSA 49.3 M6 - C9S/4 Option LSA 49.3 M8 - C9S/4 Option LSA 49.3 L9 - C9S/4 Option LSA 49.3 L10 - C9S/4 Option LSA 50.2 M6 - C9TS/4 Option LSA 50.2 L7 - C9+S/4 Option LSA 50.2 L8 - C9S/4 Option LSA 50.2 VL10*** - C9S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. Electric Power Generation 11
12 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star 550 V Specific winding 22 or 23 kva : 550 V Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 42.3 VS1 - C22T/4 Option LSA 42.3 VS2 - C22T/4 Option LSA 42.3 VS3 - C22T/4 Option LSA 42.3 S4 - C22T/4 Option LSA 42.3 S5 - C22T/4 Option LSA 42.3 M7 - C22T/4 Option LSA 42.3 M8 - C22T/4 Option LSA 42.3 L9 - C22T/4 Option LSA 44.3 S2 - C22TS/4 Option LSA 44.3 S3 - C22TS/4 Option LSA 44.3 S4 - C22T/4 Option LSA 44.3 S5 - C22T/4 Option LSA 44.3 M6 - C22T/4 Option LSA 44.3 M8 - C22TS/4 Option LSA 44.3 L10 - C22T/4 Option LSA 46.3 S2 - C23/4 Option LSA 46.3 S3 - C22T/4 Option LSA 46.3 S4 - C22T/4 Option LSA 46.3 S5 - C22T/4 Option LSA 46.3 M7 - C22TS/4 Option LSA 46.3 M8 - C22TS/4 Option LSA 46.3 L10 - C22T/4 Option LSA 46.3 L11 - C22T/4 Option LSA 47.2 VS2*** - C22S/4 Option LSA 47.2 S4 - C23S/4 Option LSA 47.2 S5 - C23S/4 Option LSA 47.2 M7*** - C22TS/4 Option LSA 47.2 L9 - C23S/4 Option LSA 49.3 S4 - C22TS/4 Option LSA 49.3 M6 - C22TS/4 Option LSA 49.3 M8 - C22TS/4 Option LSA 49.3 L9 - C22TS/4 Option LSA 50.2 S4 - C22S/4 Option LSA 50.2 M6 - C22S/4 Option LSA 50.2 L8 - C23S/4 Option LSA 50.2 VL10 - C22S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 12 Electric Power Generation
13 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star 600 V Specific winding 22 or 23 kva : 600 V Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 42.3 VS1 - C23/4 Option LSA 42.3 VS2 - C23/4 Option LSA 42.3 VS3 - C23/4 Option LSA 42.3 S4 - C23/4 Option LSA 42.3 S5 - C23/4 Option LSA 42.3 M7 - C23/4 Option LSA 42.3 M8 - C23/4 Option LSA 42.3 L9 - C23/4 Option LSA 44.3 S2 - C23/4 Option LSA 44.3 S3 - C23/4 Option LSA 44.3 S4* - C23/4 Option LSA 44.3 S5* - C23/4 Option LSA 44.3 M6 - C23/4 Option LSA 44.3 M8 - C23/4 Option LSA 44.3 L10* - C23/4 Option LSA 46.3 S2 - C23/4 Option LSA 46.3 S3 - C23/4 Option LSA 46.3 S4 - C23S/4 Option LSA 46.3 S5 - C23S/4 Option LSA 46.3 M7 - C23S/4 Option LSA 46.3 M8 - C23S/4 Option LSA 46.3 L10 - C23/4 Option LSA 46.3 L11 - C23/4 Option LSA 47.2 VS2 - C23S/4 Option LSA 47.2 S4 - C23S/4 Option LSA 47.2 S5 - C23S/4 Option LSA 47.2 M7 - C23S/4 Option LSA 47.2 L9 - C23S/4 Option LSA 49.3 S4 - C23S/4 Option LSA 49.3 M6 - C23S/4 Option LSA 49.3 M8 - C23S/4 Option LSA 49.3 L9 - C23S/4 Option LSA 49.3 L10 - C23S/4 Option LSA 50.2 S4 - C23S/4 Option LSA 50.2 M6 - C23S/4 Option LSA 50.2 L7 - C23S/4 Option LSA 50.2 L8 - C23S/4 Option LSA 50.2 VL10 - C22S/4 Option LSA 52.3 S6 - C6S/4 Option LSA 52.3 S7 - C6S/4 Option LSA 52.3 L9 - C6S/4 Option LSA 52.3 L12 - C6S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. Electric Power Generation 13
14 1500 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 50 Hz D Star V Specific winding 10 or 52 kva : 660 V kva : 690 V Excitation TYPE AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 42.3 VS1 C10/4 Option LSA 42.3 VS2 C10/4 Option LSA 42.3 VS3 C10/4 Option LSA 42.3 S4 C10/4 Option LSA 42.3 S5 C10/4 Option LSA 42.3 M7 C10/4 Option LSA 42.3 M8 C10/4 Option LSA 42.3 L9 C10/4 Option LSA 44.3 S2 C10/4 Option LSA 44.3 S3 C10/4 Option LSA 44.3 S4 C52/4 Option LSA 44.3 S5 C52/4 Option LSA 44.3 M6 C52/4 Option LSA 44.3 M8 C52/4 Option LSA 44.3 L10 C52/4 Option LSA 46.3 S2 C10S/4 Option LSA 46.3 S3 C52/4 Option LSA 46.3 S4 C10/4 Option LSA 46.3 S5 C10/4 Option LSA 46.3 M7 C10/4 Option LSA 46.3 M8 C10/4 Option LSA 46.3 L10 C52S/4 Option LSA 46.3 L11 C52S/4 Option LSA 47.2 VS2 C52S/4 Option LSA 47.2 S4 C52S/4 Option LSA 47.2 S5 C52S/4 Option LSA 47.2 M7 C52S/4 Option LSA 47.2 L9 C52S/4 Option LSA 49.3 S4 C10S/4 Option LSA 49.3 M6 C10S/4 Option LSA 49.3 M8 C10S/4 Option LSA 49.3 L9 C10S/4 Option LSA 49.3 L10 C10S/4 Option LSA 50.2 S4 C52S/4 Option LSA 50.2 M6 C52S/4 Option LSA 50.2 L7 C52S/4 Option LSA 50.2 L8 C52S/4 Option LSA 50.2 VL10 C52S/4 Option LSA 52.3 S6 C52S/4 Option LSA 52.3 S7 C52S/4 Option LSA 52.3 L9 C52S/4 Option LSA 52.3 L12 C52S/4 Option LSA 53.2 M9 C52S/4 C6S/ LSA 53.2 M11 C52S/4 C6S/ * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 14 Electric Power Generation
15 1500 R.P.M. - 1 Phase - P.F. 0.8 FF RATINGS 50 Hz double Delta (12 wires) V V G open Delta (12 wires) Standard winding 6 kva : 230 V Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 40 VS1 J6/4 C6/ LSA 40 VS2 J6/4 C6/ LSA 40 S3 J6/4 C6/ LSA 40 S4 J6/4 C6/ LSA 40 M5 J6/4 C6/ LSA 42.3 VS2 J6/4 C6/4 Option LSA 42.3 VS3 J6/4 C6/4 Option LSA 42.3 S4 J6/4 C6/4 Option LSA 42.3 S5 J6/4 C6/4 Option LSA 42.3 M7 J6/4 C6/4 Option LSA 42.3 M8 J6/4 C6/4 Option LSA 42.3 L9 J6/4 C6/4 Option LSA 44.3 S2 J6/4 C6/4 Option LSA 44.3 S3 J6/4 C6/4 Option LSA 44.3 S4 J6/4 C6/4 Option LSA 44.3 S5 J6/4 C6/4 Option LSA 44.3 M6 J6/4 C6/4 Option LSA 44.3 M8 J6/4 C6/4 Option LSA 44.3 L10 J6/4 C6/4 Option LSA 46.3 S2 J6/4 C6/4 Option LSA 46.3 S3 J6/4 C6/4 Option LSA 46.3 S4 J6/4 C6/4 Option LSA 46.3 S5 J6/4 C6/4 Option LSA 46.3 M7 J6/4 C6/4 Option LSA 46.3 M8 J6/4 C6/4 Option LSA 46.3 L10 J6/4 C6/4 Option LSA 46.3 L11 J6/4 C6/4 Option RATINGS 50 Hz SE series (4 wires) PA parallel (4 wires) 1500 R.P.M. - 1 Phase - P.F V 115 V Dedicated winding M kw / kva : 115/230 V Excitation TYPE SHUNT wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 40 VS1 - JM/ LSA 40 VS2 - JM/ LSA 40 S3 - JM/ LSA 40 S4 - JM/ LSA 40 M5 - JM/ LSA 42.3 VS1 - JM/ LSA 42.3 VS2 - JM/ LSA 42.3 VS3 - JM/ LSA 42.3 S4 - JM/ LSA 42.3 S5 - JM/ LSA 42.3 M7 - JM/ LSA 42.3 M8 - JM/ LSA 42.3 L9 - JM/ LSA 44.3 S3 - JM/ LSA 44.3 S5 - JM/ LSA 44.3 M8 - JM/ Electric Power Generation 15
16 Voltage reconnections 9 - CONNECTIONS 60 Hz 4 POLE 60 Hz R.P.M. Phase - Code 3 ph - D 3 ph - F 3 ph - D 3 ph - F 3 ph - A 1 ph - FF 1 ph - G Connections star delta star delta parallel star double delta open delta Number of wire Standard Winding V (pages 17 to 19) V (pages 17 to 19) V (pages 17 to 19) V (pages 17 to 19) V (pages 17 to 19) V (page 23) V (page 23) Specific Winding 7 (upon request) Specific Winding 8 (upon request) V (page 20) V (page 20) V (page 20) V (page 20) V (page 20) V (consult factory) V (consult factory) Specific Winding 9 (upon request) 600 V (page 21) 347 V (page 21) 600 V (page 21) 347 V (page 21) Specific Winding 22 or 23 (upon request) V (page 22) V (page 22) Specific Winding M or M1, dedicated 1 phase (upon request) SE (serie) 240 V (page 23) 120 V (page 23) PA (parallel) 16 Electric Power Generation
17 1800 R.P.M. - 3 Phase - P.F Standard winding 6 kva : 190V. 220/380 V (1) kva : 208V. 240/416 V (1) Excitation RATINGS 60 Hz D Star A Parallel Star F (12 wires only) TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1 J6/4 C6/ LSA 40 VS2 J6/4 C6/ LSA 40 S3 J6/4 C6/ LSA 40 S4 J6/4 C6/ LSA 40 M5 J6/4 C6/ LSA 42.3 VS1 J6/4 C6/4 Option LSA 42.3 VS2 J6/4 C6/4 Option LSA 42.3 VS3 J6/4 C6/4 Option LSA 42.3 S4 J6/4 C6/4 Option LSA 42.3 S5 J6/4 C6/4 Option LSA 42.3 M7 J6/4 C6/4 Option LSA 42.3 M8 J6/4 C6/4 Option LSA 42.3 L9 J6/4 C6/4 Option LSA 44.3 S2 J6/4 C6/4 Option LSA 44.3 S3 J6/4 C6/4 Option LSA 44.3 S4 J6/4 C6/4 Option LSA 44.3 S5 J6/4 C6/4 Option LSA 44.3 M6* J6/4 C6/4 Option LSA 44.3 M8 J6/4 C6/4 Option LSA 44.3 L10* J6/4 C6/4 Option LSA 46.3 S2 J6/4 C6/4 Option LSA 46.3 S3* J6/4 C6/4 Option LSA 46.3 S4 J6/4 C6/4 Option LSA 46.3 S5 J6/4 C6/4 Option LSA 46.3 M7* J6/4 C6/4 Option LSA 46.3 M8* J6/4 C6/4 Option LSA 46.3 L10 J6/4 C6/4 Option LSA 46.3 L11 J6/4 C6/4 Option LSA 47.2 VS2 J6/4 C6/4 Option LSA 47.2 S4* J6/4 C6/4 Option LSA 47.2 S5* J6/4 C6/4 Option LSA 47.2 M7 J6/4 C6/4 Option LSA 47.2 M8 J6/4 C6/4 Option LSA 47.2 L9 J6/4 C6/4 Option LSA 47.2 L9** - C6S/4 Option LSA 49.3 S4 - C6S/4 Option LSA 49.3 M6 - C6S/4 Option LSA 49.3 M8 - C6S/4 Option LSA 49.3 L9 - C6S/4 Option LSA 49.3 L10 - C6S/4 Option LSA 50.2 M6 - C6S/4 Option LSA 50.2 L7*** - C6S/4 Option LSA 50.2L8 - C6S/4 Option LSA 50.2 VL10 - C6S/4 Option LSA 52.3 S5 - C6S/4 Option LSA 52.3 S6 - C6S/4 Option LSA 52.3 S7 - C6S/4 Option LSA 52.3 L9 - C6S/4 Option LSA 52.3 L12 - C6S/4 Option LSA 53.2 M9 - C6S/4 Option LSA 53.2 M12 - C6S/4 Option Delta V V V (1) Use winding 8 for parallel operation with the main. * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. Electric Power Generation 17
18 1800 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 60 Hz D Star A Parallel Star F (12 wires only) Delta V V V Standard winding 6 kva : 220V. 254/440 V kva : 240V. 277/480 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1 J6/4 C6/ LSA 40 VS2 J6/4 C6/ LSA 40 S3 J6/4 C6/ LSA 40 S4 J6/4 C6/ LSA 40 M5 J6/4 C6/ LSA 42.3 VS1 J6/4 C6/4 Option LSA 42.3 VS2 J6/4 C6/4 Option LSA 42.3 VS3 J6/4 C6/4 Option LSA 42.3 S4 J6/4 C6/4 Option LSA 42.3 S5 J6/4 C6/4 Option LSA 42.3 M7 J6/4 C6/4 Option LSA 42.3 M8 J6/4 C6/4 Option LSA 42.3 L9 J6/4 C6/4 Option LSA 44.3 S2 J6/4 C6/4 Option LSA 44.3 S3 J6/4 C6/4 Option LSA 44.3 S4 J6/4 C6/4 Option LSA 44.3 S5 J6/4 C6/4 Option LSA 44.3 M6* J6/4 C6/4 Option LSA 44.3 M8 J6/4 C6/4 Option LSA 44.3 L10* J6/4 C6/4 Option LSA 46.3 S2 J6/4 C6/4 Option LSA 46.3 S3* J6/4 C6/4 Option LSA 46.3 S4 J6/4 C6/4 Option LSA 46.3 S5 J6/4 C6/4 Option LSA 46.3 M7* J6/4 C6/4 Option LSA 46.3 M8* J6/4 C6/4 Option LSA 46.3 L10 J6/4 C6/4 Option LSA 46.3 L11 J6/4 C6/4 Option LSA 47.2 VS2 J6/4 C6/4 Option LSA 47.2 S4* J6/4 C6/4 Option LSA 47.2 S5* J6/4 C6/4 Option LSA 47.2 M7 J6/4 C6/4 Option LSA 47.2 M8 J6/4 C6/4 Option LSA 47.2 L9 J6/4 C6/4 Option LSA 47.2 L9** - C6S/4 Option LSA 49.3 S4 - C6S/4 Option LSA 49.3 M6 - C6S/4 Option LSA 49.3 M8 - C6S/4 Option LSA 49.3 L9 - C6S/4 Option LSA 49.3 L10 - C6S/4 Option LSA 50.2 M6 - C6S/4 Option LSA 50.2 L7*** - C6S/4 Option LSA 50.2 L8 - C6S/4 Option LSA 50.2 VL10 - C6S/4 Option LSA 52.3 S5 - C6S/4 Option LSA 52.3 S6 - C6S/4 Option LSA 52.3 S7 - C6S/4 Option LSA 52.3 L9 - C6S/4 Option LSA 52.3 L12 - C6S/4 Option LSA 53.2 M9 - C6S/4 Option LSA 53.2 M12 - C6S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 18 Electric Power Generation
19 1800 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 60 Hz D Star A Parallel Star F (12 wires only) Delta V V V (1) Use winding 8 for parallel operation with the main Standard winding 6 kva : 190V. 220/380 V (1) kva : 208V. 240/416 V (1) Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K OPTION : 12 wires LSA 49.3 S4 - C6/4 Option LSA 49.3 M6 - C6/4 Option LSA 49.3 M8 - C6/4 Option LSA 49.3 L9 - C6/4 Option LSA 49.3 L10 - C6/4 Option LSA 50.2 S4 - C6/4 Option LSA 50.2 M6 - C6/4 Option LSA 50.2 L8 - C6/4 Option R.P.M. - 3 Phase - P.F Standard winding 6 kva : 220V. 254/440 V kva : 240V. 277/480 V Excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K OPTION : 12 wires RATINGS 60 Hz D Star A Parallel Star F (12 wires only) LSA 49.3 S4 - C6/4 Option LSA 49.3 M6 - C6/4 Option LSA 49.3 M8 - C6/4 Option LSA 49.3 L9 - C6/4 Option LSA 49.3 L10 - C6/4 Option LSA 50.2 S4 - C6/4 Option LSA 50.2 M6 - C6/4 Option LSA 50.2 L8 - C6/4 Option Delta V V V Electric Power Generation 19
20 1800 R.P.M. - 3 Phase - P.F. 0.8 RATINGS 60 Hz D Star A Parallel Star F (12 wires only) Delta V V V Specific winding 8 kva : 190*V.220**/380 V kva : 208*V.240**/416 V Système d'excitation TYPE SHUNT AREP PMG wires H :125 K F :105 K H : 150 K H : 163 K H :125 K F :105 K H : 150 K H : 163 K LSA 40 VS1 J8/4 C8/ LSA 40 VS2* J8/4 C8/ LSA 40 S3* J8/4 C8/ LSA 40 S4 J8/4 C8/ LSA 40 M5 J8/4 C8/ LSA 42.3 VS1 J8/4 C8/4 Option LSA 42.3 VS2 J8/4 C8/4 Option LSA 42.3 VS3 J8/4 C8/4 Option LSA 42.3 S4 J8/4 C8/4 Option LSA 42.3 S5 J8/4 C8/4 Option LSA 42.3 M7 J8/4 C8/4 Option LSA 42.3 M8 J8/4 C8/4 Option LSA 42.3 L9 J8/4 C8/4 Option LSA 44.3 S2 J8/4 C8/4 Option LSA 44.3 S3 J8/4 C8/4 Option LSA 44.3 S4* J8/4 C8/4 Option LSA 44.3 S5* J8/4 C8/4 Option LSA 44.3 M6 J8/4 C8/4 Option LSA 44.3 M8* J8/4 C8/4 Option LSA 44.3 L10 J8/4 C8/4 Option LSA 46.3 S2* J8/4 C8/4 Option LSA 46.3 S3 J8/4 C8/4 Option LSA 46.3 S4* J8/4 C8/4 Option LSA 46.3 S5* J8/4 C8/4 Option LSA 46.3 M7 J8/4 C8/4 Option LSA 46.3 M8 J8/4 C8/4 Option LSA 46.3 L10* J8T/4 C8T/4 Option LSA 46.3 L11* J8T/4 C8T/4 Option LSA 47.2 VS3* J8/4 C8/4 Option LSA 47.2 S4 - C8TS/4 Option LSA 47.2 S5 - C8TS/4 Option LSA 47.2 M7*** - C8S/4 Option LSA 47.2 L9* J8/4 C8/4 Option LSA 49.3 S4 - C8S/4 Option LSA 49.3 M6 - C8S/4 Option LSA 49.3 M8 - C8S/4 Option LSA 49.3 L9*** - C8S/4 Option LSA 49.3 L10*** - C8S/4 Option LSA 50.2 S4 - C8S/4 Option LSA 50.2 M6 - C8TS/4 Option LSA 50.2 L7 - C8TS/4 Option LSA 50.2 L8 - C8S/4 Option LSA 50.2 VL10 - C8S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. 20 Electric Power Generation
21 D RATINGS 60 Hz Star F Delta 1800 R.P.M. - 3 Phase - P.F V 347 V Specific winding 9 kva : 347/600 V Excitation TYPE SHUNT AREP PMG wires H : 125 K F : 105 K H : 150 K H : 163 K LSA 40 VS1 - C9/ LSA 40 VS2 - C9/ LSA 40 S3 - C9/ LSA 40 S4 - C9/ LSA 40 M5* - C9/ LSA 42.3 VS1 - C9/4 Option LSA 42.3 VS2 - C9/4 Option LSA 42.3 VS3 - C9/4 Option LSA 42.3 S4 - C9/4 Option LSA 42.3 S5 - C9/4 Option LSA 42.3 M7 - C9/4 Option LSA 42.3 M8 - C9/4 Option LSA 42.3 L9 - C9/4 Option LSA 44.3 S2* - C9/4 Option LSA 44.3 S3* - C9/4 Option LSA 44.3 S4* - C9/4 Option LSA 44.3 S5* - C9/4 Option LSA 44.3 M6 - C9/4 Option LSA 44.3 M8 - C9/4 Option LSA 44.3 L10* - C9/4 Option LSA 46.3 S2 - C9/4 Option LSA 46.3 S3 - C9S/4 Option LSA 46.3 S4 - C9S/4 Option LSA 46.3 S5 - C9S/4 Option LSA 46.3 M7 - C9/4 Option LSA 46.3 M8 - C9/4 Option LSA 46.3 L10 - C9S/4 Option LSA 46.3 L11 - C9S/4 Option LSA 47.2 VS2 - C9S/4 Option LSA 47.2 S4 - C9/4 Option LSA 47.2 S5 - C9/4 Option LSA 47.2 M7* - C9/4 Option LSA 47.2 M8* - C9+/4 Option LSA 47.2 L9 - C9+S/4 Option LSA 49.3 S4 - C9S/4 Option LSA 49.3 M6 - C9S/4 Option LSA 49.3 M8 - C9S/4 Option LSA 49.3 L9 - C9S/4 Option LSA 49.3 L10 - C9S/4 Option LSA 50.2 M6 - C9TS/4 Option LSA 50.2 L8 - C9S/4 Option LSA 50.2 VL10*** - C9S/4 Option LSA 52.3 S6 - C9S/4 Option LSA 52.3 S7 - C9S/4 Option LSA 52.3 L9 - C9S/4 Option LSA 52.3 L11 - C9S/4 Option * Paralleling, select the 6 wire configuration. ** Paralleling, select the 12 wire configuration. *** Paralleling, consult Leroy Somer. Electric Power Generation 21
3790 en - 06.2007 / d. Alternators LSA 46.2-4 Pole. Electrical and mechanical data
379 en - 6.7 / d Alternators LSA 46.2-4 Pole Electrical and mechanical data SPECIALLY ADAPTED FOR APPLICATIONS The LSA 46.2 alternator is designed to be suitable for typical generator applications, such
PM734F - Technical Data Sheet Winding 28
- Technical Data Sheet Winding 28 SPECIFICATIONS & OPTIONS STANDARDS STAMFORD AC generators are designed to meet the performance requirements of IEC EN 60034-1. Other international standards, including
PI044E - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
PI044E - Winding 311 Technical Data Sheet PI044E SPECIFICATIONS & OPTIONS STANDARDS Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
PI144K - Winding 311 APPROVED DOCUMENT. Technical Data Sheet. Generator Solutions AS
PI144K - Winding 311 Technical Data Sheet PI144K SPECIFICATIONS & OPTIONS STANDARDS TERMINALS & TERMINAL BOX Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section
PI734D - Technical Data Sheet
PI734D - Technical Data Sheet PI734D SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international
UCI274C - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
PI734B - Technical Data Sheet
PI734B - Technical Data Sheet PI734B SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant sections of other national and international
UCI274H - Technical Data Sheet
- Technical Data Sheet SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards such as BS000,
HCM434F - Winding 311 APPROVED DOCUMENT. Technical Data Sheet
HCM434F - Winding 311 Technical Data Sheet HCM434F SPECIFICATIONS & OPTIONS STANDARDS Marine generators may be certified to Lloyds, DnV, Bureau Veritas, ABS, Germanischer-Lloyd or RINA. Other standards
BCI184E - Technical Data Sheet
BCI184E - Technical Data Sheet BCI184E SPECIFICATIONS & OPTIONS STANDARDS Newage Stamford industrial generators meet the requirements of BS EN 60034 and the relevant section of other international standards
Spark-ignited generator set
Specification sheet Spark-ignited generator set 30 60 kw standby EPA emissions Description Cummins Power Generation commercial generator sets are fully integrated power generation systems providing optimum
R448 & R448 V50 A.V.R.
Armature + 6- This manual is to be given to the end user F1 ST5 Field Slow fuse 250V 10 A with LAM without LAM 10 Yellow 11 Red 12 Black 9 Green X2 Z1 X1 Z2 E+ E- 0V 110 22 ST3 requency ST10 50Hz 60Hz
STANDBY 800 ekw 1000kVA 60 Hz 1800rpm 480Volts
DIESEL GENERATOR SET Image shown may not reflect actual package. STANDBY 800 ekw 1000kVA Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility,
3753 en - 04.2004/b VE/B - VE/RG Va V riable speed drives
3753 en 04.2004/b Variable speed drives LEROYSOMER's drives provide SPEED VARIATION for a DC motor, SIMPLY and ECONOMICALLY from a singlephase power supply. CMStype technology is used. These products conform
R438 A.V.R. Installation and maintenance R 438. This manual is to be given to. the end user T10. Armature 6- Field X2 Z1 X1 Z2 E+ E- 0V 110 220
Armature 6- This manual is to be given to the end user 1 T5 Field Slow fuse 250V 8 A with LAM without LAM 10 Yellow 11 Red 12 Black 9 Green X2 Z1 X1 Z2 E+ E- 0V 110 220 T3 quency T10 50Hz 60Hz LAM 13 %
DIESEL GENERATOR SETS
DIESEL SETS STANDBY Standby Prime Model kw (kva) kw (kva) D175-2* 175 (218.8) 157.5 (196.9) *Tier 3 EPA Approved, Emissions Certified Picture shown may not reflect actual package FEATURES SET Complete
DIESEL GENERATOR SET. 60 Hz FEATURES GENERATOR SET
DIESEL SET STANDBY Model Standby Prime kw (kva) kw (kva) D40-4 40 (50) 36 (45) D40-4S 40 (40) 36 (36) D50-4 50 (62.5) 45 (56.3) D50-4S 50 (50) 45 (45) D60-4 60 (75) 54.6 (68.2) All models are Tier II EPA
GEP550 (3-Phase) 50 HZ. 500 kva / 400 kw FEATURES. Exclusively from your Caterpillar dealer
D I E S E L G E N E R A T O R S E T GEP550 (3-Phase) 50 HZ STANDBY PRIME 550 kva / 440 kw 500 kva / 400 kw FEATURES GENERATOR SET Complete system designed and built at ISO9001 certified facility Factory
32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw
![32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw](/thumbs/30/14614129.jpg "32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw")
,1'8675,$/#*(16(7 6HULHV#'9#448 32:(5#5$7,1* 4833#USP283#+] 4;33#USP293#+] 3ULPH 113 kva, 90 kw 124 kva, 99 kw 6WDQGE\ 114 kva, 91 kw 125 kva, 100 kw Generator set consisting of engine and alternator mounted
Diesel Generator Set Model DFMB 60 Hz
Diesel Generator Set Model DFMB 60 Hz 1500 kw, 1875 kva Standby 1250 kw, 1563 kva Prime Description The Cummins Power Generation DF-series commercial generator set is a fully integrated power generation
Diesel Generating Set
MODEL Standby Power(50Hz) Prime Power(50Hz) 44KW /55KVA 40KW /50KVA Standard Features General Features: Engine( DCEC Cummins 4BTA3.9 -G) Radiator 40 O C max,fans are driven by belt, with safety guard 24V
Atlas Copco Generators
Atlas Copco Generators QIX 15 - QIX 540 16 kva LTP to 549 kva LTP at 50 & 60 Hz The QIX options include Earth leakage relay Qc generating set control panels for all standby and/or paralleling applications
Generators TEM. for small hydroelectric power stations. Electric Machines
Generators for small hydroelectric power stations TEM Electric Machines Advanced solutions for the cleanest energy Reputable manufacturer of generators for small hydroelectric power stations TED Electric
Diesel Generator Set Model DFHC 60 Hz
Diesel Generator Set Model DFHC 60 Hz 900 kw, 1125 kva Standby 818 kw, 1023 kva Prime Description The Cummins Power Generation DF-series commercial generator set is a fully integrated power generation
WIND TURBINE TECHNOLOGY
Module 2.2-2 WIND TURBINE TECHNOLOGY Electrical System Gerhard J. Gerdes Workshop on Renewable Energies November 14-25, 2005 Nadi, Republic of the Fiji Islands Contents Module 2.2 Types of generator systems
REVIEWED BY CAPITAL PROJECTS MANAGER (DAN REDDY) GENERAL MANAGER EQUIPMENT ENGINEERING & ASSET MANAGEMENT (HAMILTON NXUMALO)
SA Port Operations DOCUMENT TYPE: REFERENCE EEAM-Q-014 (ORIGINAL SPECIFICATION HE8.2.3 Ver5) REVISION 0 SPECIFICATION TITLE: SPECIFICATION FOR ELECTRICAL MOTORS AND GENERATORS PAGE 0 of 07 COMPILED BY
STAMFORD Product Guide
Product Guide MOVE 2005 7/11/06 15:46 Page 1 STAMFORD Product Guide R There for you TM Versatile, robust and reliable brushless ac generators up to 2750kVA Product Guide MOVE 2005 7/11/06 15:46 Page 2
UNINTERRUPTIBLE POWER SUPPLIES >9900AUPS UNINTERRUPTIBLE POWER SUPPLIES
UNINTERRUPTIBLE POWER SUPPLIES 9900A >9900AUPS UNINTERRUPTIBLE POWER SUPPLIES 9900A The 9900A UPS system uses the most advanced IGBT in both the converter and inverter with Digital Signal Processor (DSP)
P 602. This generator set has been designed to meet ISO 8528 regulation. This generator set is manufactured in facilities certified to ISO 9001.
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
How To Control A Power Command Powerplant
Diesel Generator Set Model DFEJ 60 Hz EPA Emissions 450 kw, 563 kva Standby 410 kw, 513 kva Prime Description The Cummins Power Generation DF-series commercial generator set is a fully integrated power
DIESEL FEATURES GENERATOR SET. FUEL/EMISSIONS STRATEGY Low fuel consumption
IE DIESEL FEATURES GENERATOR SET PRIME 2000 ekw 2500 kva Caterpillar is leading the power generation Market place with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability,
STANDBY 40 ekw 40 kva PRIME 36 ekw 36 kva
DIESEL GENERATOR SET FEATURES Image shown may not reflect actual package. STANDBY 40 ekw 40 kva PRIME 36 ekw 36 kva Caterpillar is leading the power generation marketplace with Power Solutions engineered
Principles of Adjustable Frequency Drives
What is an Adjustable Frequency Drive? An adjustable frequency drive is a system for controlling the speed of an AC motor by controlling the frequency of the power supplied to the motor. A basic adjustable
CAT AVR V2.3. Instruction Manual. Voltage regulator for generators. March 2008
CAT AVR V2.3 Voltage regulator for generators March 2008 Instruction Manual Warnings WARNING The system should not be installed, operated, serviced or modified except by qualified personnel who understand
Automatic Voltage Regulator User s Manual
Resp. dept. R&D We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. Copyright
Mecc Alte 400Hz In Depth
400Hz Alternators Proven Capability High levels of performance, with the standard alternators filled with performance enhancing features. Supported through an experienced and computer assisted FEM design,
APS100 Rental Generator Set Specification
BARTONVIE * CEDAR RAPIDS * DAVENPORT * EAST PEORIA * HANNIBA * MOBERY * ROCK FAS * SPRINGFIED * URBANA APS100 Rental Generator Set Specification STANDBY 100 kw 60 Hz/PRIME 90 kw 60 Hz FEATURES EPA TIER
GEP150 (3-Phase) 50 HZ 60 HZ. 150 kva / 120 kw FEATURES. Exclusively from your Caterpillar dealer
D I E S E L G E N E R A T I N G S E T GEP150 (3-Phase) 50 HZ STANDBY PRIME 60 HZ STANDBY PRIME 150 kva / 120 kw 135 kva / 108 kw 165 kva / 132 kw 150 kva / 120 kw FEATURES GENERATING SET Complete system
Diesel Generator Set Model DGDK 60 Hz
Diesel Generator Set Model DGDK 60 Hz 125 kw, 156 kva Standby 113 kw, 141 kva Prime Description The Cummins Power Generation DG-series commercial generator set is a fully integrated power generation system
STANDBY 150 ekw 188 kva PRIME 135 ekw 169 kva
DIESEL GENERATOR SET FEATURES Image shown may not reflect actual package. STANDBY 150 ekw 188 kva PRIME 135 ekw 169 kva Caterpillar is leading the power generation marketplace with Power Solutions engineered
Number 1 in efficiency
PowerXL DE1 Variable Speed Starter www.eaton.eu/de1 Number 1 in efficiency The easiest way of variable motor speed NEW Variation DE11 The new device category! The PowerXL DE1 Variable Speed Starter Why
STANDBY 320 ekw 400 kva 50 Hz 1500 rpm 400 Volts
DIESEL GENERATOR SET STANDBY 320 ekw 400 kva Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Always On UPS Systems Inc., #100-150 Campion Road, Kelowna, BC Canada V1X 7S8
Door Mount UPS (Patent Pending) Shelf Mount UPS (Patent Pending) DESCRIPTION: The Always On NDM (door mount) and NSM (shelf mount) Series UPS s are dual conversion online UPS systems provided in slim,
Technical Specification. Generating Set with Waukesha engine burning natural gas
Technical Specification Generating Set with Waukesha engine burning natural gas The following presents the Gas Engine Generating Set (GEGS) APG1000 type, based on Waukesha gas engine 16V150LTD. Using the
EGSTON Standard E2xFxWx 12W
General description The family of switchmode power supplies offers an unmatched degree of flexibility and performance fulfilling even the most stringent requirements. Highly flexible electrical configuration
R450 T DETECT. 3 PH 3 PH. SENSING 7000 / 8000 RAPIDE FAST RAPIDE VOLTAGE 80V ~ 320V SHUNT / AREP SERIES PMG NORMAL NORMAL NORMAL NORMAL 5000 / 6000
8 9 R T DETECT. PH PH. SENSING Hz EXT FREQ Hz SETTING VOLT. STAB. I EXC EXT.FREQ. SET. ON ONLY FOR SPECIAL CONFIG. KNEE Hz Hz MODE MODE MODE MODE Hz VOLTAGE V ~ V LSA 9 / LSA / / 8 / LSA 9 / LSA / / 8
MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features
Central 48 V DC Power Supplies for PoE-Components MICROSENS Description Active network equipment which is supporting the Power-over-Ethernet functions, typically requires a powerful 48 V DC power supply.
City of Leesburg, Florida I.T. Data Center 130551 APPENDIX A TOSHIBA UPS INFORMATION
City of Leesburg, Florida I.T. Data Center 130551 APPENDIX A TOSHIBA UPS INFORMATION This Appendix A includes technical documents and specifications for the Toshiba 4200 FA 30 kva Uninterruptable Power
How To Use A Cat Diesel Engine
DIESEL GENERATOR SET STANDBY 440 ekw 550 kva Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac & 230Vac NEC Class 2 / Limited
Transformer oil cooler ALFA A02
A02 Transformer oil cooler ALFA Transformer oil cooler ALFA The transformer oil cooler ALFA is used to cool power transformers by means of forced air and oil flow. The oil in the cooler is circulated using
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
Magnum Mobile Generator MMG55 Specifications
Empowering Real People Magnum Mobile Generator MMG55 Specifications ENGINE John Deere PE5030TF270 - turbocharged, diesel engine o Prime - 72 hp @ 1800 rpm o Standby - 80 hp @ 1800 rpm o 4 cylinder o 3.0
CUKUROVA GENERATOR SYSTEMS
Diesel Generator CUKUROVA GENERATOR SYSTEMS 1500 Rpm, 50Hz, 400V Perkins 4012-46TAG2A diesel engine Newage/Stamford PI734C alternator Standard Generator Features AMF, Automatic mains failure unit Heavy
DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EE2302 - ELECTRICAL MACHINES II UNIT-I SYNCHRONOUS GENERATOR
1 DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING Constructional details Types of rotors EE2302 - ELECTRICAL MACHINES II UNIT-I SYNCHRONOUS GENERATOR PART A 1.
LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA. General Specification
08/17/12 Rev2 LTR Series General Specification 700 VA to 2.1 KVA 1.0 General LTR Series Uninterruptible Power Systems 700 VA - 2.1 KVA General Specification This specification describes the features and
XQ20 RENTAL. 60 Hz. Voltage kw (kva) kw (kva) 208/120V 3 PH 20 (25) 18 (22.5) 480/277V 3 PH 20 (25) 18 (22.5) 240/120V 1 PH 17 (17) 16 (16)
RENTAL Standby Prime Voltage kw (kva) kw (kva) 208/120V 3 PH 20 (25) 18 (22.5) 480/277V 3 PH 20 (25) 18 (22.5) 240/120V 1 PH 17 (17) 16 (16) Shown with optional trailer FEATURES EPA TIER 4 AND CARB CERTIFIED
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
S Y N C H R O N O U S G E N E R A T O R S
S E R I E S SYNCHRONOUS G E N E R A T O R S INDAR SYNCHRONOUS GENERATORS S E R I E S BZK INDAR ELECTRIC INDAR, EXPERIENCE AND COOPERATION INDAR Electric develops and manufactures electrical rotating machines
Annex-A TECHNICAL SPECIFICATION
Annex-A TECHNICAL SPECIFICATION FOR SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF 0.4kV (2,000kVA) DIESEL GENERATOR 1 1.0 SCOPE This specification covers the requirements of design, manufacture, delivery
A Single Source for all Power System Solutions
Power Generation Gas Engine Powered Generating Sets 1540-1750 kwe 50 Hz 1250-1760 kwe 60 Hz QSV91G Series Engines Standard Genset Features Single Source Responsibility Design, manufacture and testing of
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 185 Service Entrance Rated Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Optional Standby Power Generator Systems A. Furnish and install automatic transfer switches
Water-cooled three-phase asynchronous motors. Type series K21B / K23B
Water-cooled three-phase asynchronous motors Type series K21B / K23B Contents Page Introduction 3 Standards and regulations 4 Design version 4 Water cooling 5 Degree of protection 5 Drain holes 5 Vibration
CUKUROVA GENERATOR SYSTEMS
Diesel Generator CUKUROVA GENERATOR SYSTEMS 1500 Rpm, 50Hz, 400V Perkins 4006-23TAG2A diesel engine Newage/Stamford HCI634G alternator Standard Generator Features AMF, Automatic mains failure unit Heavy
CUKUROVA GENERATOR SYSTEMS
Diesel Generator CUKUROVA GENERATOR SYSTEMS 1500 Rpm, 50Hz, 400V Perkins 4006-23TAG3A diesel engine Stamford HCI 634 H alternator Standard Generator Features AMF, Automatic mains failure unit Heavy duty
SmartOnline 200-240V 5kVA 4.5kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 4U Rack/Tower, USB, DB9 Serial
SmartOnline 200-240V 5kVA 4.5kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 4U Rack/Tower, USB, DB9 Serial MODEL NUMBER: SU5000RT4UHV Description Tripp Lite SU5000RT4UHV 5000VA / 5kVA /
Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ
Highlights & Features Protection Class II, Double Isolation (No Earth connection is required) Universal AC input voltage without power de-rating Efficiency > 87.0% @ 115Vac, > 89.0% @ 230Vac NEC Class
AUTOMATIC TRANSFER SWITCH. Changeover Type from 250A to 2500A
AUTOMATIC TRANSFER SWITCH Changeover Type from 250A to 2500A Table of Contents Preamble 1.1 Theoretical base 1.2 Selection the size of automatic transfer switch 1.3 Automatic transfer switch components
GENERATOR SELECTION. a. Three phase - 120/208V, 3 phase, 4W wye; 277/408, 3 phase, 4W wye; * 120/240V 3 phase, 4W Delta
GENERATOR SELECTION Generators must be sized to handle their load based on the continuous KW, kilowatt load, and KVA, kilovoltamp load, and the worst case starting load KW + KVA. They must be derated for
RISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
APC Smart-UPS RT. GUIDE SPECIFICATIONS FOR 3000VA, 5000VA and 6000 VA Smart-UPS RT 230VAC Uninterruptible Power Supply
APC Smart-UPS RT GUIDE SPECIFICATIONS FOR 3000VA, 5000VA and 6000 VA Smart-UPS RT 230VAC Uninterruptible Power Supply PART 1 - GENERAL 1.1 SUMMARY A. This specification describes the operation and functionality
Low Voltage Alternators - 4 pole LSA 49.1
364 177 323 325 320 321 31 37 41 59 198 371 322 15 30 33 34 4 1 28 18 343 107 347 This manual concerns the alternator which you have just purchased. We wish to draw your attention to the contents of this
AIS 3000 APC AIS 3000 15kVA 208V w/2 Batt. Module Exp. To 4, Start-Up 5X8, Internal Maintenance Bypass
AIS 3000 APC AIS 3000 15kVA 208V w/2 Batt. Module Exp. To 4, Start-Up 5X8, Internal Maintenance Bypass APC AIS 3000, 12 kw / 15 kva,input 208V 3PH / Output 120V, 208V, 208V 3PH, Interface Port DB-9 RS-232,
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
Online data sheet PET-1CB010N10SVMC PET PRESSURE SENSORS
Online data sheet PET-1CB010N10SVMC PET B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Pressure type Measuring range Ordering information Other models and
The reliability of the grid
Power topic #9019 Technical information from Cummins Power Generation Power system considerations for cell tower applications White Paper By Wissam Balshe, Group Leader, Sales Application Engineering Industry
Low Voltage Transformers Sealed, General Purpose, Dry Type
Low Voltage Transformers Sealed, General Purpose, Dry Type Catalog 7400CT9601R4/08 08 Class 7400 CONTENTS Description..............................................Page Introduction.................................................
Single-Phase AC Synchronous Generator
ST Series Single-Phase AC Synchronous Generator Instructions for Operation and Maintenance English to English translation by R.G. Keen, May 2004. ST Series of Single-Phase AC Synchronous Generators Description
key- precision Tecum cuil Ludere ipsae. Possem Precision level detection When space and price matter Pointek CLS 100
Pointek CLS 100 Compact design and short insertion length. Ideal for constricted spaces and for small vessels or pipes up to 100 mm (4 ). Tecum cuil Ludere ipsae. Possem Precision level detection When
CUKUROVA GENERATOR SYSTEMS
Diesel Generator CUKUROVA GENERATOR SYSTEMS 1500 Rpm, 50Hz, 400V Perkins 4016TAG2A diesel engine Newage/Stamford PI734F alternator Standard Generator Features AMF, Automatic mains failure unit Heavy duty
Generators Selection and Pricing Catalog
Marathon Generators Sales Team Goodall Industrial Equipment Power Source Midwest, Inc. FJ Toolan Inc. EPAC Sales & Service P.O. Box 354 Natick, MA 01760 Phone: 508/651-2668 Fax: 508/655-3332 E-mail: sales@goodallsales.com
Circuit Breakers. Next Generation of Protection Capabilities
Circuit Breakers Next Generation of Protection Capabilities Circuit Breaker Offering Rockwell Automation offers a full line of Allen-Bradley circuit breakers and motor protection devices to help meet many
Variable Frequency Drives - a Comparison of VSI versus LCI Systems
Variable Frequency Drives - a Comparison of VSI versus LCI Systems Introduction TMEIC is a leader in the innovative design and manufacture of large ac variable f requency drive systems. TMEIC has been
ABB PV + Storage REACT-3.6/4.6-TL 3.6 to 4.6 kw
Solar inverters ABB PV + Storage REACT-3.6/4.6-TL 3.6 to 4.6 kw PV energy, combined with energy storage systems, can help increase self-consumption and energy selfsufficiency*. One of the biggest challenges
DLW 8. POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw
DLW 8 POWER RATING 1500 rpm/50 Hz 1800 rpm/60 Hz Prime 7.5 kva, 6 kw 9.1 kva, 7.3 kw Standby 8.5 kva, 6.8 kw 10.1 kva, 8.1 kw Generator set consisting of engine and alternator mounted on a fabricated steel
Specification guide no. 9 Active harmonic conditioner from 20 to 480 A
Active harmonic conditioner from 20 to 480 A Contents 1 - Installations concerned... 2 1.1 - New installations... 2 1.2 - Existing installations... 2 2 - General... 2 2.1 - Scope... 2 2.2 - Applicable
EC medium pressure axial fans. The effi cient system solution.
EC medium pressure axial fans. The effi cient system solution. GreenTech EC technology in a new dimension. Thanks to the new axial fans, our highly effi cient GreenTech EC technology is now available for
Heating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
DIESEL GENERATOR SET FEATURES. FUEL/EMISSIONS STRATEGY Low Fuel consumption
DIESEL GENERATOR SET STANDBY 560 ekw 700 kva Caterpillar is leading the power generation market place with power solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Eaton UPS 9355 20-30kVA. Energía. 20 kva/18 kw and 30 kva/27 kw 0.9 power factor. True double-conversion online UPS.
Eaton UPS 9355 20-30kVA Energía Rating 20 kva/18 kw and 30 kva/27 kw 0.9 power factor Topología True double-conversion online UPS Entrada eléctrica Nominal input voltage 208V/120V, 220V/127V+15, -20% 480V/277V,
Climasys Thermal Management System. Schneider Electric Universal Enclosures 2009
Climasys Thermal Management System Schneider Electric Universal Enclosures 2009 Schneider Electric Universal Enclosures The specialist in sealed equipment What is the mission of Schneider Electric Universal
A.V.R. R250. Installation and maintenance R250 0V E+ E- VOLT STAB FREQ. & L.A.M. CONFIG. 50Hz. 47.5Hz. 57Hz LAM 1 13% 2 25% OFF LAM OFF 9
110 0V E+ E- VOLT STAB KNEE 47.5Hz OFF 9 SPECIAL 8 KNEE 65Hz 7 OFF KNEE 6 57Hz OFF 7 8 50Hz o 9 0 5 6 1 2 3 4 OFF 1 13% 2 25% 3 OFF 4 13% 5 25% 60Hz FREQ. & L.A.M. CONFIG. This manual concerns the alternator
Effective: September 10, 2006 Vermont Attachment 1 to Rule 5.500 Public Service Board Page 1 of 6
Public Service Board Page 1 of 6 STANDARD APPLICATION FOR INTERCONNECTION OF GENERATION RESOURCES IN PARALLEL TO THE ELECTRIC SYSTEM OF: (Interconnecting Utility) Preamble and Instructions: An owner of
Thyristor-controlled power supplies and battery chargers
Thyristor-controlled power supplies and battery chargers Input voltage: 115 / 230 VAC, single phase, 50 / 60 Hz or 208 / 400 / 480 VAC, three phases, 50 / 60 Hz Output voltage: 12 / 24 / 48 / 60 / 72 /
General Information. ME-business can be accessed through: www. marathonelectric.com.
MARATHON ELECTRIC Since 1913, Marathon Electric s name has been recognized for engineering excellence, custom-designed products and an extensive product line of industrial quality motors. Available in
Low Voltage Products. Switches Automatic Transfer Switches
Low Voltage Products Switches Automatic Transfer Switches Growing importance of a secure power supply Standby power is an integral part of many industrial and domestic electrical systems. High energy prices,
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS
INSTALLATION AND MAINTENANCE INSTRUCTIONS FOR THREE PHASE INDUCTION MOTORS Frames 143T - 449TZ 5100 North IH 35 Round Rock, Texas 78681 Phone: 800-451-8798 512-255-4141 Fax: 512-244-5512 RECEIVING 1. Check
Electric Tubular Motor. ETT Series
Electric Tubular Motor ETT Series Technical Manual Rev. 2 1-192-571010n2_Ett_Technical_Manual Compliance with «CE» directives The ETT tubular servomotors Series are in accordance with the following Directives: