Fit for KNX, IP and DALI

Transcription

1 Siemens Switzerland Ltd Building Technologies Division International Headquarters Gubelstrasse Zug Switzerland Tel Siemens Building Technologies Brunel House Sir William Siemens Square, Frimley Camberley Surrey, GU16 8QD United Kingdom Tel Siemens Ltd Building Technologies Division 22/F, AIA Kowloon Tower, Landmark East 100 How Ming Street Kwun Tong, Hong Kong Tel The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. The document contains a general product overview. Availability can vary by country. For detailed product information, please contact the company office or authorized partners. The worldwide standard for home and building control Siemens Switzerland Ltd, 2015 Order no. E10003-C38-5B-A0020 Our world is undergoing changes that force us to think in new ways: demographic change, urbanization, global warming and resource shortages. Maximum efficiency has top priority and not only where energy is concerned. In addition, we need to increase comfort for the well-being of users. Also, our need for safety and security is constantly growing. For our customers, success is defined by how well they manage these challenges. Siemens has the answers. We are the trusted technology partner for energy-efficient, safe and secure buildings and infrastructure. Fit for KNX, IP and DALI Certified training options in all areas of Gamma building control

2 Practical learning made easy Siemens and the KNX Association two strong partners for your success KNX the worldwide standard for home and building control enables ondemand and cross-discipline control of room temperature and energy management as well as lighting and shading. Installed by qualified building control technicians, the intelligent networking of building automation products offers completely new ways to increase energy efficiency, security and comfort. Certified further training With our wide range of courses and practical trainings on all aspects of KNX, IP and DALI you can gain the extra edge you need to take the lead in the market. For your certified training and future-proof specialization, we offer you a wide choice of courses from KNX certificate courses like the KNX basic course and the KNX trainer seminar to application-related courses including lighting, control and monitoring with KNX. Putting theory into practice from the start Our training courses offer a balanced mix of theory and practice and so contribute to your success in the market. Our highquality training courses are distinguished by their high level of practical content. Qualification as a KNX building control technician After completion of the KNX advanced course and two modules of your choice or after successful participation in five out of seven individual modules and the advanced course exam you will receive the KNX building control technician certificate. All KNX basic and advanced courses that you have successfully completed will be counted towards your certification. Gamma training kit for training and presentations The theory you learn in the training courses can now be put into practice with the help of our Gamma training kit. It can be used to learn the most important functions of the Gamma building control system and to demonstrate them clearly. This includes: lighting and shading control, heating/cooling simulation and the control of security systems for example, alarm signals via window contacts. The Gamma training kit is especially valuable for vocational schools, trade guilds and other educational institutions. It can be used for specialized training in building control applications. The kit is available in two versions: as a DALI or school version. Highlights Fit for KNX, IP and DALI for greater comfort, security and cost efficiency in buildings Comprehensive, certified training program Advanced training to become a KNX building control technician Practice functions and demonstrate them clearly with the Gamma training kit The certified training program from Siemens provides you with comprehensive and in-depth knowledge on every aspect of KNX. The Gamma training kit offers you an extremely simple self-instruction option for training in a wide range of functions and applications, as well as for consolidating your knowledge and abilities in the KNX field leading you step by step to success. 2 3

3 Overview of courses KNX certificate courses KNX basic course BC-KNXBK, 5 days KNX advanced course BC-KNXA1, 5 days KNX trainer seminar BC-KNXT, 3 days Training courses for KNX building control technicians KNX basic course Advanced course examination BC- KNXBK 5 days KNX trainer seminar 2 KNX advanced course BC-KNXA 1 5 days KNX/DALI diagnostics/troubleshooting BC-KNXD IP basics KNXnet/IP BC-IPB Web visualization 1 BC-IPWV 1 day Lighting, control and monitoring with KNX BC-BBB Integrated applications Gamma/Synco BC-GSYNCO 1 day Temperature and climate control with KNX BC-RMCTL Building shading, control logic and functions with KNX BC-WCTL All Courses can be booked via Ongoing courses ETS3/4 to ETS5 conversion course BC-KNXT 3 days BC-ETS5UP 1.5 days Target group Content Learning goal Learning of the basics of data transmission and KNX communication technology: project structuring, project planning, commissioning and service with the Engineering Tool KNX technology Installation and mounting guidelines Design of the bus devices Design and function of the ETS Planning and commissioning of a sample project with the most important building control functions Commissioning engineers, project planners, service personnel, maintenance staff Planning and commissioning of complex KNX system solutions Capabilities of KNX building control: Logic, scenes Various transmission media Display and operation HVAC applications Safety technology, remote control and alarming Remote parameterization and maintenance of KNX systems Planners and installers of KNX systems, service personnel, project managers and teams Obtaining a qualification as a certified KNX trainer; mastering the course content as well as background knowledge of the bus system in order to be able to answer questions asked during training Bus systems in building control and automation technology Structure and functions of the KNX Association Requirements for KNX training institutions KNX certification procedure OSI reference model and data transmission technology, with focus on KNX KNX microcontrollers Acquisition of in-depth ETS knowledge Regulations, standards, installation and mounting instructions Trainers, teachers, lecturers, trainers in adult education 1 Prerequisite: participation in the IP basics KNXnet/IP course 2 Advanced seminar only after completion of the KNX advanced course possible Requirements Knowledge of VDE 0100 installation technology and experience working with Windows PC Participation in the KNX basic course and practical experience with ETS and KNX projects Successful participation in the KNX basic course and KNX advanced course as well as knowledge of presentation techniques and adult education Exam Practical and theoretical KNX exam (duration: 2 x 1.5 hours) Final practical exam (duration: 2 hours) Final theoretical exam (duration: 1.5 hours) Additional information The practical component of KNX certificate courses comprises about 50 percent. Certificate After passing the respective exam, you will receive the corresponding KNX certificate. 4 7

4 Application-specific courses KNX certificate courses Course title Contents Learning goals KNX/DALI diagnostics/ troubleshooting BC-KNXD IP basics KNXnet/IP BC-IPB Web visualization (prerequisite: previous participation in the course IP basics KNXnet/IP) BC-IPWV 1 day System configuration: communication, bus devices, topology, telegram structure (brief repetition of basic course) ETS4/5: available diagnostic tools; wizards, etc. Practical 1: commissioning a specific project, utilization of the analysis functions in the ETS for lines, devices and functions (telegrams); cross-line functions (couplers) Practical 2: recognizing and fixing of fault indicators, for example, incorrect communication flags, missing or interchanged addresses; in correct loading state of bus devices, interface address incorrectly allocated; cross-line ring Practical 3: reading out, analyzing and restoring existing installation with the Reconstruction app; learning the possibilities and limits Practical 4: external tools EIBDoctor/DALI switch Practical 5: external tools, including IP diagnostics and troubleshooting with Wireshark Internet protocols TCP/IP and UDP/IP Setting up networks Diagnostics in the LAN/Internet Starting up a WLAN router Coupling to a DSL router KNXnet/IP the standard for KNX communication via IP networks Device types for KNXnet/IP Application areas for remote visualization via KNXnet/IP Properties of the KNXnet/IP Web server Siemens N152 (IPCC) Sample projects, navigation structure, site and container navigation Setting up the process points via the ETS project (objects and group address structure), creating the OPC export file Setting up the access paths via IP for graphical processing (VPN/port forwarding/dyndns) Opening the editor and importing the ETS-OPC file, creating the sites and navigation structure Editing sites: background images, dynamic element library, dedicated icons, virtual objects Additional functions: logic, time, scenes, mathematical calculations, alarm messages, etc. KNX, IP and DALI system knowledge Knowledge of the Engineering Tool Maintenance and analysis of KNX, IP and DALI projects, eliminating errors and making corrections Learning the basics of IP technology and KNXnet/IP devices Practicing possible applications in actual cases with ETS4 Ability to create a Web server-based visualization for the KNX bus system Course title Contents Learning goals Lighting, controlling and monitoring with KNX BC-BBB Integrated applications Gamma/Synco BC-GSYNCO 1 day Building shading, control logic and functions with KNX BC-WCTL Controlling temperature and climate with KNX BC-RMCTL ETS3/4 to ETS5 conversion course BC-ETS5UP 1.5 days Lighting, controlling and monitoring with KNX Digitally Addressable Lighting Interface (DALI) applications Controlling and monitoring: software and hardware products, touch panel, room operator units UP204 Contouch, etc. Dimming energy saving bulbs benefits and problem solutions Synco HVAC basics Parameters and data points Integration into an ETS project with Gamma operator units Devising system examples, for example: + Offices + Hotel rooms + Conference rooms + Preregulation + Boiler control Scene and event programming Environmental sensors intelligently control for the home: sensors and weather control panels Facade control Correct parameterization of the drive actuators Logic/links: alarm signaling and fault messages Energy efficiency: what it means and what implementation options exist for Gamma KNX Standardization situation DIN (V) 18599/T11 EN EnEV 2014 Individual room controls (heating and cooling): components and application instructions Training on these products: UP227, UP204, AQR. QMX3.. System requirements Structured work with the ETS5 Differences/innovations in the database system: product and project data structure Imports from previous versions Interface structure (HMI) Wizards KNX apps Ability to implement and operate the different options for KNX- and DALI-based lighting controls Ability to implement S-mode integration of Synco HVAC devices into a KNX environment that is parameterized with the ETS Ability to implement and operate all possible types of scenes, event and logic control Professional implementation of building shading with weather control panels Basic knowledge of the current legal and regulatory situation with regard to energy-efficient buildings Practical application in KNX systems, especially in individual room controls with different room controllers and regulators Ability to work with KNX software tool ETS5 Knowledge of the differences compared with predecessor versions ETS3/4 Learning goal Content Target group Requirements Exam KNX basic course BC-KNXBK, 5 days Learning of the basics of data transmission and KNX communication technology: project structuring, project planning, commissioning and service with the Engineering Tool KNX technology Installation and mounting guidelines Design of the bus devices Design and function of the ETS Planning and commissioning of a sample project with the most important building control functions Commissioning engineers, project planners, service personnel, maintenance staff Knowledge of VDE 0100 installation technology and experience working with Windows PC Practical and theoretical KNX exam (duration: 2 x 1.5 hours) KNX advanced course BC-KNXA1, 5 days Planning and commissioning of complex KNX system solutions Capabilities of KNX building control: Logic, scenes Various transmission media Display and operation HVAC applications Safety technology, remote control and alarming Remote parameterization and maintenance of KNX systems Planners and installers of KNX systems, service personnel, project managers and teams Participation in the KNX basic course and practical experience with ETS and KNX projects Final practical exam (duration: 2 hours) Additional information The practical component of KNX certificate courses comprises about 50 percent. Certificate After passing the respective exam, you will receive the corresponding KNX certificate. KNX trainer seminar BC-KNXT, 3 days Obtaining a qualification as a certified KNX trainer; mastering the course content as well as background knowledge of the bus system in order to be able to answer questions asked during training Bus systems in building control and automation technology Structure and functions of the KNX Association Requirements for KNX training institutions KNX certification procedure OSI reference model and data transmission technology, with focus on KNX KNX microcontrollers Acquisition of in-depth ETS knowledge Regulations, standards, installation and mounting instructions Trainers, teachers, lecturers, trainers in adult education Successful participation in the KNX basic course and KNX advanced course as well as knowledge of presentation techniques and adult education Final theoretical exam (duration: 1.5 hours) 5 7 7

5 Sample projects are used to clearly demonstrate and practice the most important functions with the Gamma training kit. Numerous applications can be easily simulated with the Gamma training kit. KNX in action a case full of knowledge Illustrate, simulate and master the applications of the Gamma building control. Fit for KNX, IP and DALI Anyone who wants to work with the pioneering Gamma building control system must be trained on KNX, IP and DALI. Because it s KNX that connects the disciplines lighting, shading, heating and ventilation for greater comfort, security and cost efficiency. KNXnet/IP offers solutions for location-independent networking, while the DALI bus is increasingly gaining acceptance in lighting technology. With the Gamma training kit, you can clearly demonstrate to your customers the use of the Gamma building control. For use in schools The Gamma training kit is of particular interest to vocational schools, trade guilds and other educational institutions. For what s the use if an electrical apprentice can manage standard jobs like wiring, but has no idea what to do with KNX, IP and DALI? 8 Demonstrating numerous functions Every building places different demands on building control. That s why you can use the Gamma training kit to simulate a variety of applications: Conference rooms: dimmable lighting, blinds, heating, cooling, window contacts, wind alarm Staircase: lighting Offices: dimmable lighting, blinds You can also control all functions wirelessly using the IR hand-held transmitter. The right equipment for every requirement The Gamma training kit offers maximum flexibility. The functions in detail: 6 x dimmable LED lights 6 x dimmable LED lights with DALI 4 x blinds simulation proportional with slat position Windows open/closed simulation Heating/cooling simulation proportional with LED Exchangeable images of models Separate flush mounting application modules Display using touch panel and LAN module Easy to handle in a trolley case We offer the Gamma training kit in a trolley design. It is operated entirely from the front and so is very clearly laid out. The case also gives you storage space for accessories. All components including the distribution board panel, built-in devices and control elements are from Siemens. This ensures that they all match. How to purchase the Gamma training kit Your regional Siemens representative will be pleased to provide you with the latest order information and price list. Highlights it for KNX, IP and DALI for F greater comfort, security and cost efficiency emonstrate the Gamma D building control clearly amma training kits can G be upgraded or modified at any time lso available as easy-toa handle trolley case and ready to use You can upgrade or modify the Gamma training kit at any time depending on your requirements. We have left plenty of room for your ideas. It s even possible to connect additional devices via KNX, IP or DALI using plug-in connectors. The version of the Gamma training kit that can be seen in the images is just one variant. Our modular concept allows for a whole spectrum of combinations and equipment options, especially regarding the user interface. 9