NeoTherm Gasfire air heating

Transcription

1 Technical information NeoTherm Gasfire air heating GS+ SHOPHEATER GSD

2 Indhold GS+ 3 Shopheater 7 GSD 11 Vi tager forbehold for fejl og tekniske ændringer. 2

3 GS+ Environmentally friendly heating with the GS+ GS+ is a gas-fired, high-performance air heater with an axial fan. This condensing equipment provides efficiency greater than 106% (lower value). Heat is generated via a modulating (5:1) premix-burner which results in very low gas consumption. The GS+ is operated using an OpenTherm clock thermostat. The GS+ is suitable in many situations due to its extensive capacity range from 35 to 150 kw. The GS+ is designed to heat garages, warehouses, distribution centres and showrooms. Features of the GS+ Efficiency > 106% Energy-saving Environmentally-friendly Modulating premix burner Outlet temperature sensor Low temperature rise of the exit air Low thermal stratification of the heated air Stainless steel heat exchanger Condensation/frost sensor Corrosion-resistant aluzinc housing OpenTherm thermostat or 0-10 volt regulation Standard equipment Stainless steel combustion chamber & heat exchanger Closed combustion circuit Advanced modulating burner technology Electronic ignition Low NO x Powerful axial fan(s) Downflow hood with horizontal louvres CE approval PIN 0063BP3341 Eco-label: BP005 (NL) HR-TOP (BE) Carbon trust (UK) 3

4 Dimension n A = Horizontal louvres B = Gas connection C = Combustion air inlet D = Flue gas exhaust E = Electrical connection F = Axial fan G = Condensation connection diam. 40 mm d r q p ø ø o B u s m M10 (4x) l k j F D C E B A c f g G h a d e i b Type a b c d e f g h i j k l m n o p q r s u / / / Technical information Delta T max. 45K G25 = Natural gas G20 = Natural gas G31 = Propane G30 = Butane Type Nominal load (upper value) Nominal load (lower value) Efficiency at 100% full load Efficiency at 30% partial load Efficiency at min. load Burner turndown ratio Gas consumption G20 (15 C) Gas consumption G25 (15 C) Gas consumption G30 (15 C) Gas consumption G31 (15 C) Air displacement (20 C) Delta T (ΔT) Throw Weight of GS+ Noise level (5 m, side) Electrical power at 230V Consumed current kw 38,8 44,4 66,7 88,8 114,4 166,7 kw 34, % 95,7 94,8 94,2 94,3 94,2 94,8 % 105,7 105,7 105,8 105,8 105,6 104,9 % 107,3 107,3 107,4 106,2 106,3 107,0 +/- 5:1 5:1 5:1 5:1 5:1 5:1 m 3 /h 3,65-0,88 4,18-0,88 6,22-1,34 8,16-2,25 10,67-2,94 15,30-3,37 m 3 /h 4,10-1,02 4,73-1,02 7,03-1,47 9,30-2,57 11,98-3,23 17,05-3,75 kg/h 2,92-0,72 3,46-0,72 5,05-1,11 6,70-1,89 8,48-2,48 12,35-2,72 kg/h 2,68-0,64 3,17-0,64 4,72-1,04 6,22-1,72 8,03-2,29 11,69-2,57 m 3 /h K 20,0 22,8 26,3 22,8 23,5 23,1 m kg db(a) W A 1,4 1,4 1,8 3,0 3,75 7,0 4

5 Accessories - flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Wall pass-through 5 Roof pass-through 6 Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cladded roof Accessories - additional sections 1 = Horizontal louvers (standard) 2 = Vertical louvres 3 = Downflow hood 45 4 = Diffuser (2 x 45 ) and horizontal louvres 5 = Vertical louvres for diffuser 6 = Set of wall mounting brackets 7 = Shock absorbers set Assembly/location suggestions

6 Controls Isolator switch GS+/GC+ Room sensor (optional) or BMS or OpenTherm room thermostat Switchbox W9 GS+ Isolator switch Reset button Isolator switch Reset button Isolator switch Reset button Signal amplifier BMS Project-specific controls available on request. 6

7 SHOPHEATER The compact gas-fired air heater In addition to the standard GSD, we also offers a compact gas-fired suspended air heater, the SHOPHEATER. With its low height, this air heater is excellently suited to heat low-ceiling rooms. The SHOPHEATER is supplied with an axial fan as standard and a tube heat exchanger. Features Compact construction Low weight Aluminium pipes exchanger Simple assembly and operation The shopheater is also available as a vertical outlet unit. The air heater is designed for use in showrooms, shops, multi-tenant business buildings and warehouses among other applications. 7

8 Dimension TYPE AR 1.1 H G H P N E E F F 4 x M /2 TYPE AR 2.1 H t/m 5.1 H K J 4 x M8 G H P N øo øo L M R Acces door S Gas supply 1/ D A B Typ AR 1.1 H AR 2.1 H AR 3.1 H AR 4.1 H AR 5.1 H A B C D E F G H J K L M N P øo x80 2x80 2x80 2x100 R S The dimensions for the vertical outlet unit are the same as those for the horizontal outlet unit. 8

9 Technical information Type AR 1.1 H AR 2.1 H AR 3.1 H AR 4.1 H AR 5.1 H Nominal load (lower value) kw 14, Nominal power kw 13,1 18,4 24,8 31,3 35,9 Gas consumption G20 kg/h 1,5 2,12 2,86 3,6 4,13 Gas consumption G25 kg/h 1,76 2,35 3,18 4 4,59 Gas consumption G31 kg/h 1,11 1,56 2,11 2,66 4,23 Efficiency % >91 >91 >91 >91 >91 Air displacement (15 C) m 3 /h Air displacement (50 C) m 3 /h Throw m Supply voltage (50Hz) V 1~230 V 1~230 V 1~230 V 1~230 V 1~230 V Electrical power W Weight kg Noise level at 5m db(a) Accessories - flue gas exhaust Extension set 2 90 elbow 3 45 elbow 4 Wall pass-through 5 Roof pass-through 6 Lead flashing for slanting roof 7 Adhesive plate 8 Flexible lead flashing for sheetpile wall 9 Course of concentric outer wall and roof pass-through C32 9 C12 Accessories - additional sections 9

10 Controls Isolator switch Room thermostat Clock thermostat or Isolator switch Isolator switch Isolator switch Room thermostat Clock thermostat or 10

11 GSD The indestructible bestseller We have manufactured more than GS gas-fired suspended air heaters over the past 65 years. In the light of all the experience gathered over previous years, we provides a 2 year product warranty and a 10 year reducing warranty on the standard stainless steel heat exchanger. A 25 year lifespan is no exception for a GSD. The GSD can be used in many areas of application, and the heat exchanger, for example, can be used in garages,warehouses, workshops and other large rooms. The extensive range of 9 different appliances varying from 20 kw to 95 kw means precisely the right appliance can be selected whatever the project. Features of the GSD Efficiency 90% Low NOx Closed appliance Low noise level Stainless steel AISI 409 heat exchanger Stainless steel AISI 321 burners Aluzinc coating Axial fan Electronic ignition Reliable Long lifespan 2-wire control Control of 1-8 units is possible Zone optimisation control possible Temperature gradient control possible 11

12 Dimenssion A = Horizontal louvres B = Gas connection ¾ C = Combustion air inlet D = Flue gas exhaust E = Electrical connection F = Axial fan ø f g h e j k l A B C D E B M10 [4x] F m x a 196 a b c Type a b c e f g h j k l m , Technical information Type Nominal power Nominal load (lower value) Air displacement (15 C) Gas consumption G25 (15 C natural gas) Gas consumption G20 (15 C natural gas) Gas consumption G31 (15 C propane) Gas consumption G30 (15 C butane) Delta T (ΔT) Weight of GSD Throw Electrical power at 230V Consumed current Sound level at 3 metres * 95 kw 21,8 27,2 32,7 43,6 54,5 65,3 80,4 87,1 91,8 95,8 kw 24,2 30,2 36,3 48,4 60,5 72,6 89,3 96,8 102,0 106,5 m 3 /h m 3 st/h 3,0 3,6 4,4 5,9 7,1 8,7 10,6 11,6 12,5 12,8 m 3 st/h 2,6 3,1 3,8 5,1 6,3 7,6 9,3 10,1 10,5 11,1 kg/h , kg/h K kg m W A 3,2 3,2 3,2 3,2 3,2 5,0 5,0 5,0 5,0 5,0 db(a) * = Low NO x 12

13 Accessories - flue gas exhaust Type The maximum length of the intake and flue pipe is 6m incl. 2 sets of 90 elbows. 1 Extension set 2 90 elbow 3 45 elbow 4 Wall pass-through 5 Roof pass-through 6 Lead flashing for pitched roof 7 Adhesive plate 8 Flexible lead flashing for cladded roof Type 95 ø100 The maximum length of the intake and flue pipe is 1m incl. 1 sets of 90 elbows. Type 95 ø130 The maximum length of the intake and flue pipe is 6m incl. 2 sets of 90 elbows. Different flue plans available on request. Accessories - additional sections 6 1 = Horizontal louvers (standard) 2 = Vertical louvres 3 = Downflow hood 45 4 = Diffuser (2 x 45 ) and horizontal louvres 5 = Vertical louvres for diffuser 6 = Set of wall mounting brackets 7 = Shock absorbers set 8 = Frame Assembly/location suggestions 13

14 Controls Isolator switch (optional)* Room sensor or Basetherm (Room thermostat) Optitherm (Clock thermostat ) Isolator switch Isolator switch Isolator switch (optional)* Room sensor (optional)* Room sensor (optional)* Room sensor or Basetherm (Room thermostat) Optitherm (Clock thermostat ) * Only in combination with Optitherm 14

15 Notes 15

16 PHJ - lidt bedre... P. Henning Jensen ApS er en lagerførende systemudbyder, som er grundlagt i Virksomheden markedsfører et omfattende produktprogram til VVSbranchen herunder NeoTherm solenergi, NeoTherm gulvvarmesystemer, produkter til industrielopvarmning såsom Farex strålevarmepaneler og GiacoKlima kølelofter samt produkter til installationsteknik. Virksomheden beskæftiger 27 ansatte og er beliggende i Frederikssund i nye lokaler, hvor der er lagt vægt på, at såvel kunder som medarbejdere skal føle sig godt tilpas. Virksomheden er i kraftig vækst med øget afsætning og udvidet produktsortiment. P. Henning Jensen ApS påtager sig intet ansvar for mulige fejl i kataloger, brochurer og andet trykt materiale. Udg. 11/2011 Ønsker du uddybende information, rådgivning og vejledning i konkrete sager, så er du velkommen til at ringe til din forhandler. Centervej 18 DK Frederikssund Tlf Fax salg@phj.dk