Refrigeration and Air Conditioning Mechanic (Residential) POA (2006) Subtask to Unit Comparison
|
|
|
- Sheila Berniece Snow
- 7 years ago
- Views:
Transcription
1 Refrigeration and Air Conditioning Mechanic (Residential) POA (2006) Subtask to Unit Comparison NOA Subtask Task 1 Communicates with others regarding project Advises clients about current technologies and product options Consults with project team and/or individual subtrades re: project requirements Provides workplace skills-coaching and other project-specific support to apprentices Prepares and uses technical documentation. Task 2 Uses tools and equipment Selects, uses, and maintains hand/power tools and equipment 2.02 Selects, uses, and maintains tools/equipment for charging, evacuating, and storage Selects, uses, and maintains electronic and other tools for measuring and RHVAC diagnostics. A2 Orientation II: The Job of Journeywork A13 Blueprint Reading and Drafting 2.04 Uses computer equipment Uses oxy-fuel, air-fuel & compressedgas equipment Selects, uses & maintains equipment for rigging, hoisting and project-site access Stocks and operates service/installation truck. A6 Hoisting, Lifting, Rigging, and Access/Egress Equipment Task 3 Installs, repairs and maintains systems per specific codes, compliance standards, and variations Installs, repairs, and maintains electrical components and accessories Installs, repairs, and maintains gas and other piping components/accessories re: RHVAC requirements. A11 Leak Testing, Evacuation and Charging 3.03 Installs, repairs, and maintains potable water heaters Installs, repairs, and maintains sheet
2 metal components, accessories, re: RHVAC requirements Adapts RHVAC work practices for projects requiring specialty systems. C3 Refrigeration System Design D5 Air Conditioning System Design Task 4 Determines equipment requirements for RHVAC projects Performs heat gain/loss calculations. B1 Trade Mathematics C2 Building Heat Loss, Heat Gain, Load Calculations 4.02 Reads/interprets structural plans and specifications. A13 Blueprint Reading and Drafting 4.03 Confirms compatibility of new equipment with existing system Calculates CFM requirements for heating/cooling. D3 Packaged Air Conditioning Units D3 Packaged Air Conditioning Units 4.05 Performs duct-sizing Task 5 Designs air-distribution, including air-volume requirements Zones the duct system Selects grills, registers, and diffusers. Task 6 Coordinates installation schedule on project jobsite Prepares inventory of all project materials, tools, and equipment Confirms delivery and availability and availability of special-order products Complies with requirements re: permit and regulations Task 7 Prepares RHVAC-project jobsite for system installation Dismantles/removes existing equipment Lays out materials in direction of flow.
3 Task 8 Installs home heating equipment Installs sheet metal components for home heating Installs chimneys, breeching, and venting for home heating Installs piping and tubing for home heating Ties in low-voltage controls and highvoltage power supply to heating unit Installs isolation equipment for home heating. Task 9 Installs home cooling equipment Installs sheet metal components for home cooling Install refrigerant pipe/tubing, and associated components for home cooling Ties in low-voltage controls and highvoltage supply power to cooling unit Installs isolation equipment for home cooling Installs ductless split air-conditioning and heat pump systems. Task 10 Installs RHVAC specialty systems Installs heat pumps including geothermal and air-to-air types Installs hydronic heating systems, including the hot-water, forced-air, and in-floor varieties. A15 Pressure Enthalpy Diagrams Installs passive cooling systems Installs dual-fuel systems.
4 10.05 Install sheet metal components and control circuits for electric furnaces. Task 11 Installs indoor-air quality (IAQ) equipment Installs heat-recovery ventilators (HRVs) and energy-recovery ventilators (ERVs) Installs central exhaust systems and exhaust fans Installs IAQ accessories. Task 12 Installs operational and safety controls for system Installs single-zone and/or multi-zone systems. D8 Air Measuring Instruments and System Air Balancing Installs control system components, devices, and accessories. Task 13 Commissions RHVAC system Performs heating/cooling system startup checks Tests, adjusts, and balances the installed RHVAC system Orients customer/client re: RHVAC system user-interface and inputs. D8 Air Measuring Instruments & System Air Balancing Task 14 Performs planned (preventive) maintenance Negotiates/interprets arrangements for system maintenance Interprets inspection results re: warranty entitlements Explains options re: compliance with warranty requirements Offers and sells service/maintenance agreements Completes and shares documentation re: new service/mtce. agreements. Task 15 Provides emergency (unscheduled) maintenance service Completes and forwards warranty claims Performs diagnostics.
5 15.03 Determines/recommends remedial action, including notifications re: shut-off requirements Assess costs/availability of B1 Trade Mathematics parts/repairs Performs repair. Task 16 Analyzes existing and/or changing system conditions Assesses risks/hazards and other key concerns for whole system Initiates corrective action based on assessments and recommendations. D8 Air Measuring Instruments & System Air Balancing Rev. May 2011
International Training Institute for the Sheet Metal and Air Conditioning Industry
American Council on Education - National Guide to College Credit for Workforce Training Page 1 of 13 International Training Institute for the Sheet Metal and Air Conditioning Industry The (ITI), formerly
COMPETENCY ANALYSIS PROFILE Refrigeration and Air Conditioning Systems Mechanic - Branch 1 313A
COMPETENCY ANALYSIS PROFILE Refrigeration and Air Conditioning Systems Mechanic - Branch 1 313A (All unshaded skill sets must be demonstrated/completed) PROTECT SELF AND OTHERS Identify, interpret, and
National Guide to College Credit for Workforce Training
Heating, Ventilation, and Air Conditioning (HVAC) Curriculum Metal Apprenticeship: HVAC Curriculum ACE Transcript Data: SMAC-0003 Location: Various sites in the United States and Canada. Length: 458 hours
SECTION 23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC INTRODUCTORY INFORMATION
SECTION 23 05 93 TESTING, ADJUSTING, AND BALANCING FOR HVAC INTRODUCTORY INFORMATION The purpose of this guide specification is to assist the specifier in correctly specifying Mechanical System Testing
Heating, Ventilation and Air Conditioning
Heating, Ventilation and Air Conditioning The Montgomery County Students Construction Trades Foundation, Inc has developed a comprehensive construction technology program designed to prepare students for
HYDRONIC DESIGNER / INSTALLER MODULE DESCRIPTIONS
HYDRONIC DESIGNER / INSTALLER MODULE DESCRIPTIONS PIP301: Blueprint Reading This module covers the basic skills required for interpreting information provided by drawings. These skills are essential in
NCCER 13614 Progress Blvd, Alachua, Florida 32615 Phone: (888) 622-3720 E-mail: info@nccer.org
NCCER 13614 Progress Blvd, Alachua, Florida 32615 Phone: (888) 622-3720 E-mail: info@nccer.org HVAC Competencies / Objectives Level One MODULE 03101-07 INTRODUCTION TO HVAC 1. Explain the basic principles
B.C. Buildings Corporation. Mandatory Preventive Maintenance Standard. To Meet Section 4.78 of the WCB OH & S Regulation
B.C. Buildings Corporation Mandatory Preventive To Meet Section 4.78 of the WCB OH & S Regulation Prepared by: BCBC WCB-IAQ Steering Committee Mandatory Preventive TABLE OF CONTENTS Page no. INTRODUCTION...1
Steamfitters & Plumbers Local Union No. 464 JATC. HVAC/Service Curriculum. Work Process: Mechanical & Electrical Principles 4500 5400
Work Process Work Process: Approximate Process Hours: Mechanical & Electrical Principles 4500 5400 Ventilation, Air Conditioning & Refrigeration Controls 595 700 Heating & Steam Systems 1105 1300 Piping
Test Code: 8297 / Version 1
Blueprint HVAC Maintenance Technology PA Test Code: 8297 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information HVAC Maintenance Technology PA Blueprint Contents General Assessment
Manitoba Curriculum Framework of Outcomes Refrigeration & Air Conditioning Overview 2013 Draft
Acknowledgements Manitoba Curriculum Framework of Outcomes Refrigeration & Air Conditioning Overview 2013 Draft Manitoba Education gratefully acknowledges the contributions of the following individuals
In an effort to improve the city s building permit and inspection processes the building permit fee schedule has been revised and updated.
Smart Processing is a City of Norfolk initiative to provide exceptional customer service by ensuring businesses and citizens have a seamless experience while going through the city s processes. In an effort
Refrigeration and Air Conditioning Mechanic On-the-Job Training Guide
Refrigeration and Air Conditioning Mechanic On-the-Job Training Guide Refrigeration and Air Conditioning Mechanics install, maintain and repair primary and secondary refrigeration and cooling systems,
Customized Assessment Blueprint
Customized Assessment Blueprint HVAC Installer Basic - Test Codes: 7906 and 7796 Measuring What Matters Competencies and Skills Tested in this Assessment: HVAC Theory Heat Theory and Refrigeration HVAC
HVAC/R Technology AAS Degree
HVAC/R Technology AAS Degree State Submission Mark Wilson, President January 2014 Table of Contents EXECUTIVE SUMMARY... 2 IDENTIFICATION AND DESCRIPTION OF THE PROGRAM... 3 OBJECTIVES AND PURPOSE OF THE
Mechanical-Electrical Technology MECHANICAL-ELECTRICAL TECHNOLOGY. 304 2015-16 Sacramento City College Catalog
MET Degree: A.S. Certificates of Achievement: Commercial Building Energy Auditing and Commissioning Specialist Mechanical Systems Technician Commercial Building Energy Auditing and Commissioning Specialist
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR)
Heating, Ventilation, Air Conditioning and Refrigeration (HVACR) I. Demonstrate safety skills in typical HVACR work situations to NATE Core Installer Knowledge Areas for Technician Excellence for Safety
Topics for Today. Order of Magnitude Mechanical Estimating. Order of Magnitude Estimate Goal. Project Delivery Methods. Questions for Client
Order of Magnitude Mechanical Estimating Justin Apprill, P.E. Topics for Today Estimate Goals A Concept for Accurate Conceptual Estimating HVAC Systems Common System Types and Rules of Thumb Pricing Example
Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system
AURETU004 Application Competency Field Unit Sector Elements Elements describe the essential outcomes. 1. Prepare to diagnose and repair air conditioning and HVAC system 2. Diagnose air conditioning and
SECTION 00 0110 TABLE OF CONTENTS. H. 00 2115.01 - Proposed Material, Product or Equipment Substitution Request
SECTION 00 0110 PROCUREMENT AND CONTRACTING REQUIREMENTS 1.1 DIVISION 00 -- PROCUREMENT AND CONTRACTING REQUIREMENTS A. 00 0101 - Project Title Page B. 00 0105 - Certifications Page C. 00 0110 - Table
HVAC Basic Science - System Capacity
HVAC Basic Science - System Capacity Btu/hour, btu/h, b/h, btuh. btu?? 1 MBH = 1000 btu/hour 1 KBH = 1000 btu/hour 1 ton of cooling= 12,000 btu/hour 1 watt = 3.414 btu/hour 1 kilowatt = 1000 watts = 3,414
QUESTIONS TO ASK WHEN REPLACING YOUR HVAC TOGETHERWESAVE.COM
QUESTIONS TO ASK WHEN REPLACING YOUR HVAC TOGETHERWESAVE.COM TOGETHERWESAVE.COM IS IT TIME TO REPLACE YOUR HVAC SYSTEM? If your heating and cooling system is 15 to 20 years old and is experiencing problems,
PLBG/GAS SAFETY Information Bulletin
PLBG/GAS SAFETY Information Bulletin November 2012 P/G-08-02-PLBG/GAS [Rev 3] Page 1 of 11 SUBJECT: REQUIREMENTS FOR COMBINATION HEATING SYSTEMS: DUAL PURPOSE WATER (POTABLE) HEATER (COMBO UNIT) Safety
BUILDING RENOVATION TECHNICIAN PROGRAM (T110)
BUILDING RENOVATION TECHNICIAN PROGRAM (T110) PROGRAM NAME COURSE CODE SCHOOL CENTRE LOCATION DURATION Building Renovation Technician T110 Construction Engineering Technology Casa Loma Campus 2 years (4
Air Conditioning, Heating and Refrigeration (HVAC) Technology Diploma
D 35 11 0 Air Conditioning, Heating and Refrigeration (HVAC) Technology Diploma Concentration Overview The Air Conditioning, Heating, and Refrigeration Technology curriculum provides the basic knowledge
Rogelio Longoria. Bachelors in Applied Arts & Science, Currently under way; taking basics at TSTC Harlingen
Rogelio Longoria Heating, Ventilation, Air Conditioning & Refrigeration Technology - Instructor 1902 North Loop 499 Harlingen, TX 78550 Building H-100 Office Phone: 956-364-4671 Email: Rogelio.longoria@harlingen.tstc.edu
COMMISSIONING OF HVAC SYSTEMS
FORM CL-01 SYSTEMS / EQUIPMENT INCLUDED : SYSTEM STARTUP CHECKLIST I - PRE - STARTUP INSPECTION EQUIPMENT MOUNTING & SETTING CONTROL, INTERLOCK & POWER WIRING ALIGNMENT OF MOTORS & DRIVES PIPING, CONNECTIONS
Refrigeration, Air Conditioning and Appliance Servicing
Electrotechnology Training Package UEE11 Refrigeration, Air Conditioning and Appliance Servicing Qualifications Skill Sets Competency Standard Units This national training package endorsed in December
JEFFERSON COLLEGE COURSE SYLLABUS HRA216 RESIDENTIAL AIR CONDITIONING SYSTEMS. 5 Credit Hours. Prepared by Roy H. Stueve March 28, 2010
JEFFERSON COLLEGE COURSE SYLLABUS HRA216 RESIDENTIAL AIR CONDITIONING SYSTEMS 5 Credit Hours Prepared by Roy H. Stueve March 28, 2010 Revised by William Kaune April 25, 2012 Mary Beth Ottinger, Ph.D.,
HVA 120 RESIDENTIAL HVAC INSTALLATION
HVA 120 RESIDENTIAL HVAC INSTALLATION PRESENTED AND APPROVED: AUGUST 9, 2012 EFFECTIVE: FALL 2013-14 Prefix & Number HVA 120 Course Title: Residential HVAC Installation Purpose of this submission: New
Name: Air Conditioning, Heating and Refrigeration (47.0201)
Name: Air Conditioning, Heating and Refrigeration (47.0201) Directions: Evaluate the student by entering the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no
National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook
National Competency Based Skill Training Refrigeration and Air-conditioning Mechanic Logbook Trainee:... Training Provider:... Year:... Trainee Contact no:... Competency Based Skill Training Logbook Introduction
RESNET National Rater Test Study Guide Outline
RESNET National Rater Test Study Guide Outline The RESNET national home energy rating standard spells out a listing of the knowledge base and skills set for Home Energy Ratings. Trainers and Rating Quality
Mechanical-Electrical Technology
Mechanical-Electrical Technology MET Degrees: A.S. Mechanical-Electrical Technology A.S. Wastewater Treatment Plant Operation A.S. Water Treatment Plant Operation Division of Advanced Technology Donnetta
Addendum to Florida Academy Catalog for: HVAC Fundamentals HVAC Advanced Fundamentals
Addendum to Florida Academy Catalog for: HVAC Fundamentals HVAC Advanced Fundamentals HVAC PROGRAMS The school s Heating, Ventilation, and Air Conditioning Programs provide training for entry level employment
UEENEEJ164A Analyse the operation of HVAC air and hydronic systems
UEENEEJ164A Analyse the operation of HVAC air and hydronic systems Release: 2 UEENEEJ164A Analyse the operation of HVAC air and hydronic systems Modification History Not Applicable Unit Descriptor Unit
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE. ACHP 104 Refrigeration & Air Conditioning Service II
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ACHP 104 Refrigeration & Air Conditioning Service II Prepared By: Stan Skowronek CANINO SCHOOL OF ENGINEERING TECHNOLOGY
Refrigeration & Air-conditioning Technician
Refrigeration & Air-conditioning Technician A competent Refrigeration & Air-conditioning Technician is expected to: 1. Make use of best practice principles based on theory and experience gained throughout
NYC Department of Education Building Condition Assessment Survey 2014-2015 BROADWAY EDUCATION CAMPUS - MANHATTAN, 26 BROADWAY, MANHATTAN, NY, 10004
School: InspectionId Asset Data Inspection Type Building Assessment Survey 204-205 BROADWAY EDUCATION CAMPUS - MANHATTAN, 26 BROADWAY, MANHATTAN, NY, 0004 Time In Last Edited 255 MECHANICAL 205-05-8 09:00AM
A. The Commissioning Authority (CxA) has been contracted or will be contracted directly with the Owner for this project.
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 08 02 PART 1 GENERAL 1.01 AUTHORITY (CxA) A. The Commissioning Authority (CxA) has been contracted or will be contracted directly
Heating, Refrigeration and Air Conditioning. Techniques Program Standard. The approved program standard for the
Heating, Refrigeration and Air Conditioning Techniques Program Standard The approved program standard for the Heating, Refrigeration and Air Conditioning Techniques program of instruction leading to an
Evaluate, Clean, and Tune Guidance
Evaluate, Clean, and Tune Guidance The Evaluate, Clean and Tune (ECT) process serves three essential purposes in the Weatherization Assistance Program (WAP). The first is to evaluate the existing system
Construction Technology: HVAC II, July 2012, Page 1 of 5
Indiana Department of Education Academic Course Framework CONSTRUCTION TECHNOLOGY: HVAC II Construction Technology: HVAC II provides students with classroom and laboratory experiences concerned with heat
Poor Performing AC? High Electric Bills? High Humidity?
Poor Performing AC? High Electric Bills? High Humidity? If you answered yes to any or all of these questions, it may be time to consider a new Air Conditioning system. Read on for useful information when
Occupational Title: Heating, Ventilation, Air Conditioning, and Refrigeration (HVACR) Technician
Occupational Title: Heating, Ventilation, Air Conditioning, and Refrigeration (HVACR) Technician Key Purpose: Diagnose, install, service, and repair heating, ventilation, air conditioning, and refrigeration
APPENDIX C FORMS 2010 FLORIDA BUILDING CODE ENERGY CONSERVATION C.1
APPENDIX C FORMS 2010 FLORIDA BUILDING CODE ENERGY CONSERVATION C.1 ENERGY PERFORMANCE LEVEL (EPL) DISPLAY CARD ESTIMATED ENERGY PERFORMANCE INDEX* = The lower the Energy Performance Index, the more efficient
Circuit breaker panel. Power supply for condensing unit. Power supply for furnace. Air handler (Furnace)
UNIT OBJECTIVES Describe the concept of year-round air conditioning List three typical year-round air conditioning system types List the five ways to condition the air Determine airflow for a cooling system
Presentation Outline. Common Terms / Concepts HVAC Building Blocks. Links. Plant Level Building Blocks. Air Distribution Building Blocks
Presentation Outline Common Terms / Concepts HVAC Building Blocks Plant Level Building Blocks Description / Application Data Green opportunities Selection Criteria Air Distribution Building Blocks same
HVAC Training Center. Course/Curriculum Information. 2388 County Road 93 Verbena, AL 36091 Phone: 1-800-634-0154 Fax: 1-205-755-6168
HVAC Training Center Course/Curriculum Information 2388 County Road 93 Verbena, AL 36091 Phone: 1-800-634-0154 Fax: 1-205-755-6168 Alabama Power s HVAC Training Center One of a kind" is a phrase often
The Embassy of the United States of America invites you to submit an offer for supply and install the following A/Cs:
RFQ number PR4877728 The Embassy of the United States of America invites you to submit an offer for supply and install the following A/Cs: A- Supplying and installing 30 high wall A/C split unit 3HP- 24,000
Statement of Work. 3.0 Details of Service Pre Start-up. - 1 - Cooling Start-up Service. Installation Service. Table of Contents. 1.0 Executive Summary
Installation Service Statement of Work - 1 - Cooling Start-up Service Cooling Start-up Service Service 1.0 Executive Summary Table of Contents 1.0 Executive Summary 2.0 Features & Benefits 3.0 Details
KENNEBEC VALLEY COMMUNITY COLLEGE
KENNEBEC VALLEY COMMUNITY COLLEGE ENERGY SERVICES AND TECHNOLOGY PROGRAM ASSOCIATE OF APPLIED SCIENCE DEGREE TABLE OF CONTENTS Program Description... 2 Admission Requirements... 2 AAS Degree Curriculum...
Study Guide Refrigeration and Air Conditioning Mechanic
Study Guide Refrigeration and Air Conditioning Mechanic Department of Advanced Education and Skills Apprenticeship and Certification Study Guide Refrigeration and Air Conditioning Mechanic (Based on 2009
Acumen Enterprises, Inc.
Hourly rates Discount w/o Rebate Electrician $78.00 10% $70.20 $70.73 HVAC Technician $78.00 10% $70.20 $70.73 Insulator $42.00 10% $37.80 $38.08 Sheet Metal Worker $74.00 10% $66.60 $67.10 Plumber/Pipefitter
Sample Company SECTION 019113 GENERAL COMMISSIONING REQUIREMENTS PART 1 GENERAL 1.1 SUMMARY AND CONTRACT RESPONSIBILITIES
SECTION 019113 GENERAL COMMISSIONING REQUIREMENTS PART 1 GENERAL 1.1 SUMMARY AND CONTRACT RESPONSIBILITIES A. The Owner will contract separately and directly for the majority of the commissioning work
Building Energy Systems. - HVAC: Heating, Distribution -
* Some of the images used in these slides are taken from the internet for instructional purposes only Building Energy Systems - HVAC: Heating, Distribution - Bryan Eisenhower Associate Director Center
EXTENDED 10 YEAR LIMITED LIFETIME WARRANTY LIMITED LIFETIME WARRANTY
EXTENDED 10 YEAR LIMITED LIFETIME WARRANTY Spectrum Manufacturing warrants that the heat pumps and air handling equipment (if purchased with a Water to Water System) manufactured by Spectrum Manufacturing
HEATING, VENTILATION, AIR CONDITIONING, AND REFRIGERATION HVAC/R II COURSE DESCRIPTION
HEATING, VENTILATION, AIR CONDITIONING, AND REFRIGERATION HVAC/R II COURSE DESCRIPTION HVAC/R II is a course in which students will extend their skills and knowledge related to residential and commercial
Energy Efficiency in Industrial HVAC Systems
Energy Efficiency in Industrial HVAC Systems Heating, ventilation and air conditioning (HVAC) constitutes up to 35 percent of energy used in manufacturing facilities. This fact sheet is geared towards
Air Conditioning & Refrigeration Technology
61 Location: Patterson Campus - Bldg. E Program Information Air conditioning and refrigeration systems are an intricate part of the success of almost every business. Air conditioning systems are responsible
FREQUENTLY ASKED QUESTIONS about HERS and CHEERS Provided by the California Energy Commission Consumer Energy Center
http://www.energy.ca.gov/ FREQUENTLY ASKED QUESTIONS about HERS and CHEERS Provided by the California Energy Commission Consumer Energy Center Relevant Standard The Residential Manual for Compliance with
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM
SECTION 23 81 03 - PACKAGED ROOFTOP AIR CONDITIONING UNITS NON-CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Packaged rooftop air conditioning unit (5 tons and smaller). 2. Roof curb. 1.2
LAKE COUNTY ANIMAL SERVICES EXPANSION SECTION 15459
SECTION 15459 PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections, apply to work
2 STEPS TO CONDUCTING YOUR HVAC ASSESSMENT
Presentation Synopsis Heating, Ventilating and Air Conditioning Building Condition Assessment Vancouver, B.C. Prepared for: EPIC Prepared by: Douglas Spratt, P.Eng Douglas Spratt & Associates Ltd. www.dspratt-associates.com
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT
SECTION 23 00 01 HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT PART 1 - GENERAL 1.1 DESCRIPTION A. The Work specified in this Section consists of designing, furnishing and installing factory-assembled
http://www.bls.gov/oco/ocos192.htm
Skip Navigation Links Latest Numbers http://www.bls.gov/oco/ocos192.htm Heating, Air-Conditioning, and Refrigeration Mechanics and Installers Nature of the Work Training, Other Qualifications, and Advancement
Design Consultant (Electrical Services) Design Deliverables and Responsibilities Allocation (Stage E+)
Design Consultant (Electrical Services) Design Deliverables and Responsibilities Allocation (Stage E+) 1. In addition to the information scheduled below, the pre-tender designer is responsible for: (i)
The Air Conditioning Contractors of America (ACCA) Don s History. ACCA History. Defining the Bar Questions
HVAC Quality Installation - Code Requirements, Best Practices, and Contractor Selection Donald Prather Technical Services Manager Air Conditioning Contractors of America Pennsylvania Housing Research Center
Integrated Solar Radiant Systems
Integrated Solar Radiant Systems William Shady PE President Topics Radiant heating Indoor air quality Radiant Cooling Project Photos Questions and answers The goal for our clients Healthy Comfort Why Radiant
HVAC Simplified Approach Option
HVAC Simplified Approach Option Part I Project Address: City: HVAC System Designer of Record: Date: Zip: Qualification The building is 2 stories or less in height and has a gross floor area is less than
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR ASSISTANT INSPECTOR
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR ASSISTANT INSPECTOR This information is being given to you to describe potential opportunities as an Assistant Inspector. The career ladders
Guide Specification SECTION 23 08 00 - COMMISSIONING OF HVAC PART 1 - GENERAL 1.1 SUMMARY
SECTION 23 08 00 - COMMISSIONING OF HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. HVAC Commissioning description. 2. HVAC Commissioning responsibilities. 1.2 REFERENCES A. American Society
How To Make A High Efficiency Thermostat
Zoning with Variable Speed Mini-Split Systems Fujitsu Service Training Welcome - Thank you for attending Did you know? In 1940 only 42% of homes in the US had central heating In 1970 20% of homes had central
Training Centre is at the back of KFC in Three Rivers. Next to Telkom
MCD Training Centre Jannie Kotze Refrigeration & Air-conditioning dept Cell - 083 377 1713 58 Umgeni street Tel / Fax - 016 454 0201 Three Rivers Fax -2-Email 086 625 3242 Vereeniging E-mail - jalkot@iafrica.com
UA-NJ Air Conditioning & Refrigeration Division Training Curriculum
UA-NJ Air Conditioning & Refrigeration Division Training Curriculum 1st Year Basic Mathematics for HVAC Using formulas as an expression of logical sequence in solving problems. Measuring using a ruler
Residential Heating, Ventilation and Air Conditioning Standards
Residential Heating, Ventilation and Air Conditioning Standards Volume 1 Home Builders Institute Residential HVAC Skill Standards Page 1 of 43 An Overview of HBI Framework for Skill Standards We are pleased
American Mechanical Services. American Mechanical Services. Customer Information SIN ITEM DESCRIPTION PRICING. 13.
General Services Administration Federal Supply Service Authorized Federal Supply Schedule Price List On-Line access to contract ordering information, terms and conditions, up-to-date pricing, and the option
Heating Ventilation, Air Conditioning and Refrigeration Associate in Applied Science Field of Study Code: HVACR.AAS.CONTRA
Heating Ventilation, Air Conditioning and Refrigeration Associate in Applied Science Field of Study Code: HVACR.AAS.CONTRA Catalog Description: The Contractor degree provides the technical and business
Heating, Ventilation, and Air Conditioning (HVAC)
Job Ready Assessment Blueprint Heating, Ventilation, and Air Conditioning (HVAC) Test Code: 3045 / Version: 01 Copyright 2005. All Rights Reserved. General Assessment Information Heating, Ventilation,
Florida Power & Light Company. Business Heating Ventilation & Air Conditioning ( HVAC ) Program Standards. Effective: November 9, 2015
Florida Power & Light Company Business Heating Ventilation & Air Conditioning ( HVAC ) Program Standards Effective: November 9, 2015 Table of Contents Eligibility Requirements - Chiller... 2 Rebate Amount
DUFFERIN-PEEL CATHOLIC DISTRICT SCHOOL BOARD
DUFFERIN-PEEL CATHOLIC DISTRICT SCHOOL BOARD JOB DESCRIPTION POSITION TITLE: Air Conditioning Mechanic DEPARTMENT: Plant TITLE OF IMMEDIATE SUPERVISOR: Supervisor, Maintenance Services Position Summary
SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING
SYLLABUS For BASIC TRADE COURSE (360 Hours) On REFRIGERATION AND AIR CONDITIONING INDEX 1. Introduction 3 2. Objectives 3 3. Employment Opportunity 4 4. Course Structure 4 5. Entry Qualification 4 6. List
T160 Heating Refrigeration and AC Technician MTCU Code 55500 Program Learning Outcomes
T160 Heating Refrigeration and AC Technician MTCU Code 55500 Program Learning Outcomes Synopsis of the Vocational Learning Outcomes * The graduate has reliably demonstrated the ability to 1. relate effectively
When considering your heating options, keep in mind that 60% of your energy. costs are attributed to space heating. You
Heating Options Furnaces & Boilers September 2005 CONSUMERS GUIDE - TO HOME HEATING OPTIONS CONTENTS Heat Distribution Energy Source Boilers Proper Sizing Energy Efficiency - Standards - Rating System
POSITION DESCRIPTION
TITLE: Maintenance II - HVAC REPORTS TO: DEPARTMENT: Buildings and Grounds CLASSIFICATION: Director of Buildings and Grounds Buildings and Grounds Bargaining Unit I. Accountability Objectives: Primarily
Request for Proposals for Residential HVAC Services May 12 st, 2015
Request for Proposals for Residential HVAC Services May 12 st, 2015 Project Description: The Cabarrus County Planning and Development Services Department will be administering the Weatherization Program
AE-1483 Ground-source Heat Pumps. Carl Pedersen Energy Educator
AE-1483 Ground-source Heat Pumps Carl Pedersen Energy Educator A heat pump can be an efficient alternative to a standard home heating system. Moreover, during the cooling season, its function can be reversed,
MICRO HYDRO FOR THE FARM AND HOME
MICRO HYDRO FOR THE FARM AND HOME How much can I expect to save? This depends entirely on the available flow, available head (fall) and the duration that the flow is available. Some farms struggle to maintain
This permit does not include replacement or upgrading of the existing electrical panel or service (a separate electrical permit must be obtained).
CITY OF MILPITAS Building & Safety Department 455 E. Calaveras Blvd. Milpitas, CA 95035 408-586-3240 www.ci.milpitas.ca.gov RESIDENTIAL AIR CONDITIONING, REPLACEMENT 1. PERMIT INFORMATION: The replacement
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER
CITY OF LOS ANGELES PERSONNEL DEPARTMENT CAREER OPPORTUNITIES FOR MECHANICAL HELPER This information is being given to you to describe potential opportunities as a Helper. The career ladders that Helpers
UEENEEJ191A Select residential air conditioning system equipment, components and accessories
UEENEEJ191A Select residential air conditioning system equipment, components and accessories Release: 2 UEENEEJ191A Select residential air conditioning system equipment, components and accessories Modification
ENERGY EFFICIENT HEATING
RE-ENERGIZE YOUR HOME ENERGY EFFICIENT HEATING PSE.COM/ReENERGIZE RE-ENERGIZE YOUR HOME, YOUR HEATING, YOUR SAVINGS A warm home is a comfortable home for you and your family, and yet your heating system
REGULATIONS OF CONNECTICUT STATE AGENCIES TITLE 20. PROFESSIONAL LICENSES DEPARTMENT OF CONSUMER PROTECTION (4) OCCUPATIONAL LICENSING
REGULATIONS OF CONNECTICUT STATE AGENCIES TITLE 20. PROFESSIONAL LICENSES DEPARTMENT OF CONSUMER PROTECTION (4) OCCUPATIONAL LICENSING Current with material published in Conn.L.J. through 5/13/08 Sec.
Plumbing and HVAC/R Distribution 2013
A SERIES OF DISTRIBUTION INDUSTRY REPORTS Plumbing and HVAC/R Distribution 2013 Build Your Own Business Case A dynamic Market Model and Forecast Tool is included in addition to the base report. This interactive
HVAC and Plumbing Technology
HVAC and Plumbing Technology Expansion of Existing Program State Submission Mark Wilson, President May 2013 TABLE OF CONTENTS Executive Summary... 2 Identification and Description of the Program... 2 Objectives
City of Peterborough
City of Peterborough Building Division Basement Finishing Guide Residential Information Guides This information is intended to be used as an guide that outlines minimum requirements when finishing a basement,
CLASS B AIR CONDITIONING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION
CLASS B AIR CONDITIONING CONTRACTORS GENERAL TRADE KNOWLEDGE EXAMINATION CONTENT INFORMATION The General Trade Knowledge portion of the examination will be administered in one session on the morning on
DEPARTMENT OF CODES AND BUILDING SAFETY FLOOD RECOVERY INFORMATION
May 2010 DEPARTMENT OF CODES AND BUILDING SAFETY FLOOD RECOVERY INFORMATION GUIDELINES FOR PERMITS ASSOCIATED WITH THE REPAIR OF FLOOD DAMAGED HOMES AND BUILDINGS The Department of Codes and Building Safety
Certification Information. Qualifications. Test Specifications. Air Conditioning Industry References
AIR CONDITIONING INSTALLATION CERTIFICATION Certification Information Scope - Tests a candidate's knowledge of the installation, service, maintenance, and repair of HVAC systems. System sizes are limited
The ASHRAE HQ Building Can the energy efficiency of the different mechanical systems really be compared? RESIDENTIAL LIGHT COMMERCIAL COMMERCIAL
The ASHRAE HQ Building Can the energy efficiency of the different mechanical systems really be compared? RESIDENTIAL LIGHT COMMERCIAL COMMERCIAL Technical Article April 2013 The ASHRAE HQ Building Can