Catalog Trauma Implants. Instruments. Sets. Instruments and implants approved by the AO Foundation

Transcription

1 Catalog Trauma 2011 Implants Sets and implants approved by the AO Foundation

2 Bone Forceps Set Bone Forceps Set Bone Forceps Set Graphic Case With graphic outlines, autoclavable, perforated, complete with cover Self-Centering Bone Holding Forceps with speed lock Size 1, 240 mm length Size 2, 260 mm length Size 3, 280 mm length Reduction Forceps With serrated jaws, 240 mm length, speed lock, 2 ea mm length, speed lock With points, 205 mm length, ratchet Also available: Additional Bone Holding and Reduction Forceps R 5/11

3 5-2 Bone Forceps Set, soft ratchet Bone Forceps Set, soft ratchet Soft Ratchet Bone Forceps Set Graphic Case Reduction Forceps with points, medium handle, soft ratchet Reduction Forceps, with serrated jaw, medium handle, soft ratchet Bone Holding Forceps, for plates to 14 mm wide, soft ratchet Bone Holding Forceps, for plates to 19 mm wide, soft ratchet Bone Holding Forceps, for plates to 22 mm wide, soft ratchet Reduction Forceps, with serrated jaw, large handle, soft ratchet, 2 ea. Also available: Additional Soft Ratchet Forceps and implants approved by the AO Foundation 5/11

4 Collinear Reduction Clamp Set Collinear Reduction Clamp Set Graphic Case for Collinear Reduction Clamp Sliding Mechanism mm Cleaning Brush Spiked Disk Hohmann-Style Arm, 183 mm Pelvic Arm, 225 mm Percutaneous Arm, 255 mm R 5/11

5 5-4 Combined Aiming Device Combined Aiming Device Set Aluminum Case Instrument Tray mm Drill Bit, quick coupling, 125 mm, 2 ea mm Drill Bit, quick coupling, 195 mm, 2 ea mm Drill Bit, quick coupling, 195 mm, 2 ea mm Drill Bit, quick coupling, 195 mm, 2 ea mm Drill Bit, quick coupling, 195 mm, 2 ea mm Drill Sleeve mm Drill Sleeve, with two parallel holes mm Drill Sleeve mm Drill Sleeve mm Drill Sleeve Small Pointed Hook Locking Sleeve Measuring Bar Offset Pointed Hook Forked Impactor Hook, for external fixator Large Hook, for knee Check Tube Suture Pusher mm Suture Passer, 2 ea mm Trocar Also available: Combined Aiming Device Set (130.30J) With standard drill bits J, , , , and J to fit Jacobs chuck and implants approved by the AO Foundation 5/11

6 Instrument Set Instrument Set Aluminum Case Instrument Tray Instrument Tray Small Bone Hook Medium Bone Hook Hohmann Retractors Blade width mm, short narrow tip, 2 ea mm, short narrow tip, 2 ea mm, narrow tip mm, long wide tip Periosteal Elevators mm width, curved blade mm width, curved blade mm width, straight blade Hammers grams grams Chisel Handle Chisel Blades ea.: 10, 16 and 25 mm widths Gouge, straight, 10 mm width, standard Additional instruments available R 5/11

7 5-6 Shoulder Instrument Set Retractors and Spreaders Shoulder Instrument Set Retractors and Spreaders Graphic Case for Shoulder Instrument Set Retractors and Spreaders Delta Retractor, 2 ea Delta Retractor, pointed Bone Retractor, humeral head Ring Retractor Ring Retractor, narrow Ring Retractor, drop-shaped Ring Retractor, drop-shaped, narrow Ring Retractor, delta-shaped Shoulder Spreader, left bend Shoulder Spreader, right bend and implants approved by the AO Foundation 5/11

8 Hip Preservation Surgery Set Hip Preservation Surgery Set Graphic Case, for Hip Preservation Surgery Set Straight Pelvic Osteotomes mm blade width mm blade width Angled Pelvic Osteotomes mm blade width mm blade width Short Angled Pelvic Osteotome, 15 mm blade width Bayonette Pelvic Osteotomes mm blade width mm blade width Flag Pelvic Osteotome, 20 mm blade width Curved Pelvic Osteotomes mm blade width mm blade width Pelvic Osteotomes, 304 mm mm mm R 5/11

9 5-8 Hip Preservation Surgery Set Hip Preservation Surgery Set continued (cont d.) Femoral Head Templates mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter Aluminum Spoon Retractors medium large Malleable Retractors, 330 mm long mm wide mm wide mm wide Aluminum Blunt Pelvic Retractor Aluminum Hohmann Retractors mm, short narrow tip mm wide tip mm width mm width mm width Chisel Handle, synthetic, autoclavable Chisel Blades mm width mm width, long mm width mm width, long mm width mm width, long mm width mm width, long Also available: Spoon Retractors, medium and large ( and ) Curved Chisel Blades, 10 mm, 16 mm and 25 mm ( ) Blunt Pelvic Retractor (398.55) Hohmann Retractors ( ) and implants approved by the AO Foundation 5/11

10 Interchangeable Gouge, Chisel and Impactor Set Interchangeable Gouge, Chisel and Impactor Set Aluminum Case Instrument Tray Instrument Tray Handle for gouges and chisels Cancellous Bone Impactors mm, round, curved mm, flat, curved mm, round mm x 16 mm, rectangular mm x 20 mm, rectangular mm x 30 mm, rectangular Gouges Curved, 10 mm width Curved, 15 mm width Chisel, straight, 16 mm blade width Also available: Rasps (397.79) and (397.80) Gouges ( ) Chisels ( ) R 5/11

11 5-10 Large Distractor Set Large Distractor Set Large Distractor Set Graphic Case mm Drill Bit, quick coupling, 195 mm, 2 ea mm Pin Wrench, 120 mm Universal Chuck with T-Handle Triple Trocar Assembly mm Trocar, 110 mm mm/3.5 mm Drill Sleeve, 110 mm mm/5.0 mm Drill Sleeve, 98 mm Large Distractor Assembly mm Threaded Spindle, 480 mm mm Threaded Spindle, 330 mm Spindle Nut, 3 ea Sliding Carriage End Piece with double joint Holding Sleeve, 55 mm length, 2 ea Holding Sleeve, 105 mm length, 2 ea. Implants , 5.0 mm Schanz Screws, blunted trocar point ea.: 170 and 200 mm length , 6.0 mm Schanz Screws, spade point ea.: 160 and 190 mm length Note: The Large Distractor Assembly may be ordered as a complete unit. Large Distractor, complete (394.35) and implants approved by the AO Foundation 5/11

12 Medium Distractor Set Medium Distractor Set Medium Distractor Set Graphic Case mm Drill Bit, quick coupling, 195 mm, 2 ea mm Pin Wrench, 120 mm Ratchet Wrench, 11 mm width across flats Universal Chuck with T-Handle Triple Trocar Assembly mm/3.5 mm Drill Sleeve, 110 mm mm/5.0 mm Drill Sleeve, 98 mm mm Trocar, 110 mm Medium Distractor Assembly mm Threaded Spindle, 360 mm mm Threaded Spindle, 260 mm Spindle Nut, 3 ea Sliding Carriage End Piece with double joint Holding Sleeve, 45 mm, 2 ea Holding Sleeve, 85 mm, 2 ea. Implants mm Schanz Screws, blunted trocar point ea.: 150, 170 and 200 mm Note: The Medium Distractor Assembly may be ordered as a complete unit. Medium Distractor, complete (395.49) R 5/11

13 5-12 Minimally Invasive Reduction & Plate Insertion Instrument Set Minimally Invasive Reduction & Plate Insertion Instrument Set Graphic Case Lid, 520 mm x 250 mm Tray for Minimally Invasive Reduction Handles, Large Three Level Graphic Case Base, 510 mm x 250 mm Tray for Minimally Invasive Reduction Handles, small Tray for Minimally Invasive Plate Insertion mm Guide Wire, 410 mm, threaded tip, with Trocar, 4 ea mm Threaded Guide Wire, 300 mm, for use with 7.3 mm Cannulated Screw System, 4 ea mm Threaded Guide Wire, 150 mm, spade point, for use with 4.5 mm Cannulated Screw System, yellow, 4 ea Large Hexagonal Key, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws, 2 ea Small Hexagonal Key, for 2.7 mm and 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws Combination Wrench, 8 mm width across flats Combination Wrench, 11 mm width across flats, 2 ea Soft Tissue Retractor, small, extendible Reduction Handle, toothed, for 3.0 mm Threaded Rod, 2 ea Reduction Handle, rounded, for 1.6 mm Guide Wire, 2 ea Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for LCP 3.5 mm and LC-DCP 3.5 mm mm Protection Sleeve, slotted mm/1.6 mm Drill Sleeve mm/3.0 mm Drill Sleeve Adjusting Nut, for 3.0 mm Threaded Rod, 2 ea mm Threaded Rod, 270 mm, self-drilling tip, 4 ea Soft Tissue Retractor, large, extendible Small Soft Tissue Retractor Blade, long Large Soft Tissue Retractor Blade, long Reduction Handle, toothed, for 5.0 mm Threaded Rod, 2 ea Reduction Handle, rounded, for 2.8 mm Guide Wire, 2 ea Plate Holder, for Minimally Invasive Plating Osteosynthesis and implants approved by the AO Foundation 5/11

14 Minimally Invasive Reduction & Plate Insertion Instrument Set Minimally Invasive Reduction & Plate Insertion Instrument Set continued Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for Narrow LCP 4.5 mm/5.0 mm and Narrow LC-DCP 4.5 mm Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for Broad LCP 4.5 mm/5.0 mm and Broad LC-DCP 4.5 mm Connecting Screw, for Plate Holder for Minimally Invasive Plating ( ) mm Protection Sleeve, slotted mm/2.8 mm Drill Sleeve mm-1.6 mm Wire Guide mm/5.0 mm Drill Sleeve Cannulated Tap for 5.0 mm Threaded Rod, 195 mm Adjusting Nut, for 5.0 mm Threaded Rod, 2 ea mm Threaded Rod, 380 mm, self-drilling tip, 4 ea mm Cannulated Threaded Rod, 335 mm, blunt tip, 1.6 mm cannulation, 2 ea Clamping Foot for LCP, 2.7 mm/3.5 mm Medial Distal Tibia, right Clamping Foot for LCP, 2.7 mm/3.5 mm Medial Distal Tibia, left Clamping Foot for LCP, 3.5 mm Lateral Proximal Tibia, right Clamping Foot for LCP, 3.5 mm Lateral Proximal Tibia, left Connecting Screw, for 3.5 mm LCP Clamping Foot for LCP, 4.5/5.0 mm Lateral Proximal Tibia, right Clamping Foot for LCP, 4.5/5.0 mm Lateral Proximal Tibia, left Adjusting Nut for & Connecting Screw, for 4.5 mm/5 mm LCP Also available: Minimally Invasive Reduction Instrument Set, small ( ) Minimally Invasive Plate Insertion Set ( ) R 5/11

15 5-14 Minimally Invasive Reduction Instrument Set, small Minimally Invasive Reduction Instrument Set, small Graphic Case Lid, 520 mm x 250 mm Single Level Graphic Case Base, 510 mm x 250 mm Tray for Minimally Invasive Reduction Handles, small mm Threaded Guide Wire, 150 mm, spade point, for use with 4.5 mm Cannulated Screw System, yellow, 4 ea Small Hexagonal Key, for 2.7 mm and 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws Reduction Handle, toothed, for 3.0 mm Threaded Rod, 2 ea Reduction Handle, rounded, for 1.6 mm Guide Wire, 2 ea mm Protection Sleeve, slotted mm/1.6 mm Drill Sleeve mm/3.0 mm Drill Sleeve Adjusting Nut, for 3.0 mm Threaded Rod, 2 ea mm Threaded Rod, 270 mm, self-drilling tip, 4 ea. Also available: Minimally Invasive Reduction and Plate Insertion Instrument Set ( ), which consists of sets , and in a Three-High Graphic Case and implants approved by the AO Foundation 5/11

16 Minimally Invasive Plate Insertion Set Minimally Invasive Plate Insertion Set Graphic Case Lid, 520 mm x 250 mm Single Level Graphic Case Base, 510 mm x 250 mm Tray for Minimally Invasive Plate Insertion Large Hexagonal Key, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws Combination Wrench, 8 mm width across flats Combination Wrench, 11 mm width across flats Soft Tissue Retractor, small, extendible Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for LCP 3.5 mm and LC-DCP 3.5 mm Soft Tissue Retractor, large, extendible Small Soft Tissue Retractor Blade, long Large Soft Tissue Retractor Blade, long Plate Holder, for Minimally Invasive Plating Osteosynthesis Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for Narrow LCP 4.5 mm/5.0 mm and Narrow LC-DCP 4.5 mm Clamping Foot, for Plate Holder for Minimally Invasive Plating ( ), for Broad LCP 4.5 mm/5.0 mm and Broad LC-DCP 4.5 mm Connecting Screw, for Plate Holder for Minimally Invasive Plating ( ) Clamping Foot for LCP, 2.7 mm/3.5 mm Medial Distal Tibia, right Clamping Foot for LCP, 2.7 mm/3.5 mm Medial Distal Tibia, left Clamping Foot for LCP, 3.5 mm Lateral Proximal Tibia, right Clamping Foot for LCP, 3.5 mm Lateral Proximal Tibia, left Connecting Screw, for 3.5 mm LCP Clamping Foot for LCP, 4.5/5.0 mm Lateral Proximal Tibia, right Clamping Foot for LCP, 4.5/5.0 mm Lateral Proximal Tibia, left Adjusting Nut for and Connecting Screw, for 4.5 mm/5 mm LCP Also available: Minimally Invasive Reduction and Plate Insertion Instrument Set ( ), which consists of sets , and in a Three-High Graphic Case R 5/11

17 5-16 Minimally Invasive Reduction Instrument Set Minimally Invasive Large Reduction Instrument Set Lid for Minimally Invasive Reduction and Plate Insertion Set Tray for Minimally Invasive Reduction Handles, large Single Level Graphic Case Base mm Guide Wire, 410 mm, 4 ea mm Threaded Guide Wire, 300 mm, 4 ea Large Hexagonal Key Combination Wrench, 11 mm width across flats Reduction Handle, toothed, for 5.0 mm Threaded Rod, 2 ea Reduction Handle, rounded, for 2.8 mm Guide Wire, 2 ea mm Protection Sleeve, slotted mm/2.8 mm Drill Sleeve mm/1.6 mm Wire Guide mm/5.0 mm Drill Sleeve Cannulated Tap for 5.0 mm Threaded Rod, 195 mm Adjusting Nut for 5.0 mm Threaded Rod, 2 ea mm Threaded Rod, self-drilling tip, 380 mm, 4 ea mm Cannulated Threaded Rod, blunt tip, 335 mm, 2 ea. Also available: Minimally Invasive Reduction and Plate Insertion Instrument Set ( ), which consists of sets , and in a Three-High Graphic Case 11.0 mm Carbon Fiber Rods (394.8x) Large Combination Clamp ( ) and implants approved by the AO Foundation 5/11

18 Orthopaedic Cable System Instrument Set Orthopaedic Cable System Instrument Set Orthopaedic Cable System Instrument Set Graphic Case Medium Cable Passer, curved Large Cable Passer, curved Medium Cable Passer Medium Cable Passer, 45 angle Large Cable Passer Large Cable Passer, 45 angle Cable Tensioner Cable Crimper Attachment Bit, 4 ea Provisional Tensioning Device, 4 ea Forceps, for use with Cerclage Buttons and Positioning Pins Cable Cutter, standard Cable Cutter, large Also available: Care and Maintenance Kit for Cable Tensioner ( ) Consists of: mm Cleaning Brush mm Cleaning Stylet Autoclavable Oil 1.0 mm and 1.7 mm Cables with Crimp, sterile (298.8xx.01S), (498.8xx.01S) and ( S) Trochanteric Reattachment Devices ( S) and ( S) Cerclage Positioning Pins and Cerclage Buttons (298.8xxS), ( xS), (498.8xxS) and ( xS) R 5/11

19 5-18 Orthopaedic Screwdriver Set Orthopaedic Screwdriver Set Orthopaedic Screwdriver Set Graphic Case StarDrive Screwdriver Shaft, T25, self-retaining Cannulated StarDrive Screwdriver, T40, self-retaining Handle, with mini quick coupling Small Handle, with quick coupling Large Handle, with quick coupling Hexagonal Screwdriver Cruciform Screwdriver Cruciform Screwdriver Shaft, self-retaining Cruciform Screwdriver Shaft, self-retaining Cruciform Screwdriver Shaft, self-retaining Hexagonal Screwdriver Shaft Cannulated 4.0 mm Hexagonal Screwdriver Cannulated 2.5 mm Hexagonal Screwdriver Shaft StarDrive Screwdriver Shaft, T Cannulated 3.5 mm Hexagonal Screwdriver Cannulated 3.5 mm Hexagonal Screwdriver Shaft Cannulated 4.0 mm Hexagonal Screwdriver Shaft Cannulated Cruciform Screwdriver, 1.2 mm cannulation Cannulated Driver Shaft for Threaded Washers Cruciform Screwdriver Shaft, quick coupling Cannulated StarDrive Screwdriver Shaft, T StarDrive Screwdriver Shaft, T Small Hexagonal Screwdriver Shaft, long Large Hexagonal Screwdriver Shaft, long Cruciform Screwdriver Shaft with Holding Sleeve Cannulated 3.5 mm Hexagonal Screwdriver Shaft Combination T-Wrench and implants approved by the AO Foundation 5/11

20 Pelvic C-Clamp II Set Pelvic C-Clamp II Set Vario Case for Pelvic C-Clamp II Bin for Vario Case, 64 mm x 29 mm x 53 mm Short Cannulated Nail for Pelvic C-Clamp II, 2 ea Long Cannulated Nail for Pelvic C-Clamp II, 2 ea mm Kirschner Wire, 285 mm, trocar point, 1 pkg. of mm K-Wire Insertion Handle Pelvic C-Clamp II mm Protective Cap, 4 pkgs. of Ratchet Wrench, 11 mm width across flats, 2 ea Wire Cutter, 220 mm Socket Wrench with Hammer Note: The Pelvic C-Clamp II ( ) consists of one Inner Rail ( ) and two each of the following: Outer Rail ( ), Upper Side Arm ( ), Lower Side Arm ( ), and Threaded Tube ( ). R 5/11

21 5-20 Percutaneous Reduction Forceps Instrument and Implant Set Percutaneous Reduction Forceps Instrument and Implant Set Percutaneous Reduction Forceps Instrument and Implant Set Module Screw Length Marker Kit Percutaneous Reduction Forceps Trocar, for Percutaneous Reduction Forceps Plastic Trocar, for Percutaneous Reduction Forceps mm Drill Guide, for Percutaneous Reduction Forceps mm Drill Guide, for Percutaneous Reduction Forceps mm Drill Guide, for Percutaneous Reduction Forceps mm Drill Guide, for Percutaneous Reduction Forceps mm Drill Guide, for Percutaneous Reduction Forceps Handle, with mini quick coupling mm Cruciform Screwdriver Shaft, self-retaining mm Cruciform Screwdriver Shaft, self-retaining mm/2.0 mm Cruciform Screwdriver Shaft, self-retaining mm Drill Bit, Stryker J-latch, 44.5 mm, 2 ea mm Drill Bit, Stryker J-latch, 60 mm, 2 ea mm Drill Bit, Stryker J-latch, 65 mm, 2 ea mm Drill Bit, Stryker J-latch, 65 mm, 2 ea mm Drill Bit, Stryker J-latch, 85 mm, 2 ea. Implants mm Titanium Cortex Screws, self-tapping ea.: 6, 7, 8, 10, 12 and 14 mm mm Titanium Cortex Screws, self-tapping ea.: 6, 7, 8, 10, 12 and 14 mm mm Titanium Cortex Screws, self-tapping ea.: 8, 9, 10, 11, 12, 14, 16 and 18 mm 2 ea.: 20 and 22 mm Also available: Percutaneous Reduction Forceps Instrument Set ( ) contains the same instruments as set ( ), without implants. and implants approved by the AO Foundation 5/11

22 Periarticular Reduction Forceps Set Periarticular Reduction Forceps Set Periarticular Reduction Forceps Set Graphic Case Periarticular Reduction Forceps, medium Periarticular Reduction Forceps, large Spiked Disk, 2 ea. R 5/11

23 5-22 Screw Removal Set Screw Removal Set Graphic Case for Screw Removal Set mm Drill Sleeve Clip-on, for use with Drill Suction Device mm Drill Sleeve Clip-on, for use with Drill Suction Device mm Drill Sleeve Clip-on, for use with Drill Suction Device mm Drill Sleeve Clip-on, for use with Drill Suction Device mm Drill Sleeve Clip-on, for use with Drill Suction Device mm Carbide Drill Bit Extension mm Carbide Drill Bit Extension Drill Suction Device Straight Sharp Hook AO Coupling Extension Shaft Small Screw Removal Forceps Large Screw Removal Forceps mm Cruciform Screwdriver Shaft, 100 mm mm Hex Screwdriver Shaft, 100 mm T25 StarDrive Screwdriver Shaft, 100 mm T40 StarDrive Screwdriver Shaft, 100 mm Hollow Reamer, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws, complete Extraction Bolt, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws Hollow Reamer, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws, complete Extraction Bolt, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws Extraction Bolt, for 1.5 mm screws Hollow Reamer, complete, for 1.5 mm screws Extraction Bolt, for 2.0 mm screws Hollow Reamer, complete, for 2.0 mm screws Hollow Reamer, complete, for 2.7 mm screws Extraction Bolt, for 2.7 mm screws Hollow Reamer, complete, for 4.5 mm screws and implants approved by the AO Foundation 5/11

24 Screw Removal Set Screw Removal Set continued continued Extraction Bolt, for 4.5 mm screws Conical Extraction Device, for Threaded Washers Conical Extraction Screw, for 1.5 mm and 2.0 mm Cortex Screws Conical Extraction Screw, for 2.7 mm and 3.5 mm Cortex Screws Conical Extraction Screw for 3.5 mm Screws Conical Extraction Screw, for Large Screws and 4.9 mm Bolts Countersink, for 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws, for use with Handle (311.43) or T-Handle (311.44) Handle, with mini quick coupling, stainless steel Countersink, for 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws Handle, with mini quick coupling Large Handle with quick coupling mm Screwdriver Blade, Self-Retaining, StarDrive, short mm Screwdriver Blade, self-retaining, StarDrive, short mm Screwdriver Blade, self-retaining, StarDrive, short Solid Hexagonal Screwdriver, 4.0 mm width across flats, for removal of 7.3 mm Cannulated Screws mm Cruciform Screwdriver Shaft, self-retaining mm Cruciform Screwdriver Shaft, self-retaining mm/2.0 mm Cruciform Screwdriver Shaft, self-retaining Small Hexagonal Screwdriver Shaft StarDrive Screwdriver Shaft, T15, self-retaining, quick coupling StarDrive Screwdriver Shaft, T25, self-retaining, quick coupling, 165 mm Large Hexagonal Screwdriver with T-Handle Large Hexagonal Screwdriver Shaft mm StarDrive Screwdriver Shaft Cannulated Driver, for Threaded Washers, for 3.0 mm Cannulated Screws Cruciform Screwdriver Shaft, quick coupling, for 3.0 mm Cannulated Screws Sharp Hook Conical Extraction Screw Small Universal Chuck with T-Handle Forceps, for broken screw removal Narrow Screw Removal Pliers Hollow Gouge, for broken screw exposure, 205 mm length Also available: Spare Centering Pins ( ) R 5/11

25 5-24 Soft Tissue Spreader Set Soft Tissue Spreader Set Soft Tissue Spreader Forceps Soft Tissue Spreader Retractor, 35 mm, right Soft Tissue Spreader Retractor, 35 mm, left Soft Tissue Spreader Retractor, 75 mm, right Soft Tissue Spreader Retractor, 75 mm, left Soft Tissue Spreader Trocar, 35 mm Soft Tissue Spreader Trocar, 75 mm and implants approved by the AO Foundation 5/11

26 Wire Instrument and Implant Set Wire Instrument and Implant Set Wire Instrument and Implant Set Graphic Case With graphic outlines, autoclavable, perforated, complete with cover mm Wire Passer, standard Wire Tightener, with handle and two pegs, 240 mm length FASTIGHT Wire Tightener Holding Forceps, 170 mm length, 2 ea Wire-Bending Pliers, 160 mm length Flat-Nosed Parallel Pliers, 160 mm length Locking Pliers, 180 mm length Small Wire Cutter, 160 mm length Wire Cutter, 220 mm length Implants , Cerclage Wires, with eye, 280 mm (10/pkg.) pkg.: 1.0 mm 2 pkg.: 1.25 mm , Cerclage Wire Coils, soft, 10 meters ea.: 1.0 mm and 1.25 mm Kirschner Wires, trocar point, 150 mm length (10/pkg.) mm dia., 1 pkg mm dia., 1 pkg mm dia., 2 pkg mm dia., 1 pkg mm dia., 1 pkg mm dia., 1 pkg. R 5/11

27 5-26 Implants Bone Staples Bone Staples Width Overall Thickness Height (measured at top) mm 23 mm 3 mm Width Overall Height Cables Orthopaedic Cable S 1.0 mm Cable with Crimp, 750 mm single pack, sterile S S S 1.7 mm Cable with Crimp, 750 mm single pack, sterile 10-pack dispenser, sterile 1.0 mm Titanium Cable with Crimp (1/pkg.) 750 mm, sterile S 1.0 mm Titanium Needle Cable with Crimp 750 mm, sterile S 1.7 mm CoCr Cable with Titanium Crimp (1/pkg.) 750 mm, sterile and implants approved by the AO Foundation 5/11

28 Implants 5-27 Trochanteric Reattachment Devices S standard Titanium Trochanteric Reattachment Devices with CoCr cables, sterile S long Cerclage Buttons and Pins Cerclage Pins and Buttons Used to maintain position of cable relative to plate hole S 3.5 mm Cerclage Positioning Pin, sterile S 4.5 mm Cerclage Positioning Pin, sterile S 3.5 mm Threaded Cerclage Positioning Pin, sterile S 4.5 mm Threaded Cerclage Positioning Pin, sterile S 3.5 mm Titanium Cerclage Positioning Pin, sterile S 4.5 mm Titanium Cerclage Positioning Pin, sterile S 3.5 mm Titanium Threaded Cerclage Positioning Pin, sterile S 4.5 mm Titanium Threaded Cerclage Positioning Pin, sterile R 5/11

29 5-28 Implants Cerclage Buttons and Pins continued S S 5.0 mm Crimp Positioning Pin, sterile 7.3 mm Crimp Positioning Pin, sterile S 5.0 mm Titanium Crimp Positioning Pin, sterile S S S S T15 StarDrive/2.5 mm Hex Cerclage Button, sterile T25 StarDrive/3.5 mm Hex Cerclage Button, sterile T15 StarDrive/2.5 mm Hex Titanium Cerclage Button, sterile T25 StarDrive/3.5 mm Hex Titanium Cerclage Button, sterile S S Cannulated 4.0 mm Hex Cerclage Button Cannulated 4.0 mm Hex Titanium Cerclage Button Cerclage Wires Cerclage Wires Cerclage Wires, with eye (In packages of 10) Diameter Length mm 280 mm mm 600 mm Cerclage Wire Coils Diameter Length mm 10 meters and implants approved by the AO Foundation 5/11

30 Implants 5-29 Cerclage Wires continued Precut Cerclage Wires Without eye, soft (In packages of 10) Diameter Length mm 150 mm Note: See Metric Conversions page in front of catalog for wire gauge sizes. Kirschner Wires Kirschner Wires, trocar point (In packages of 10) Diameter Length * 0.6 mm 70 mm * Diameter Length * 2.0 mm 150 mm * Used especially for hand surgery Titanium Kirschner Wires, trocar point (In packages of 10) Diameter Length mm 70 mm R 5/11

31 5-30 Implants Kirschner Wires continued Kirschner Wires, trocar points on both ends (In packages of 10) Diameter Length mm 70 mm Kirschner Wires with Thread, trocar point (In packages of 10) Diameter Length Thread Length mm 150 mm 15 mm Pelvic C-Clamps Short Cannulated Nail for Pelvic C-Clamp II Long Cannulated Nail for Pelvic C-Clamp II and implants approved by the AO Foundation 5/11

32 5-31 Bone Levers Malleable Bone Levers Length Width mm 8 mm mm 10 mm Bone Spreaders Bone Spreaders Length Width of Beak mm 7 mm mm 8 mm mm 12 mm Bone Spreaders with 5.5 mm blade, small handle with 8 mm blade, medium handle with 12 mm blade, large handle Bone Staple Inserter Bone Staple Inserter To insert Bone Staples (282.80, ) R 5/11

33 5-32 Cable Crimper Cable Crimper Cable Passers Medium Cable Passer Large Cable Passer Medium Cable Passer, curved Large Cable Passer, curved Medium Cable Passer, 45 angle Large Cable Passer, 45 angle and implants approved by the AO Foundation 5/11

34 5-33 Cable Cutters Cable Cutter with Trigger Handle includes one blade Blade for Cable Cutter Cable Cutter, standard Cable Cutter, large R 5/11

35 5-34 Cable Tensioners Cable Tensioner Slotted Nosepiece For cable tensioner Attachment Bit For Cable Tensioner ( ) Provisional Tensioning Device For use with Cable Tensioner ( ) Chisels Chisel Handle Synthetic, autoclavable For use with Chisel Blades Chisel Blades For use with Chisel Handle, (399.54) Blade width Blade width mm mm mm mm Chisel Blades, long Blade width mm mm mm mm and implants approved by the AO Foundation 5/11

36 5-35 Chisels continued Curved Chisel Blades mm width mm width mm width PHOTO NOT AVAILABLE Chucks Small Universal Chuck with T-Handle Universal Chuck with T-Handle For insertion of Steinmann pins and Schanz screws Universal Chuck For use with Hand Drill (591.00), opens to 6.0 mm Quick Coupling Chuck For use with Hand Drill (591.00) R 5/11

37 5-36 Chucks continued J Quick Coupling Chuck To convert Jacobs chuck drills to accept quick coupling drill bits AO Coupling Extension Shaft Clamps Towel Clamp For paper drapes Collinear Reduction Clamp Components Sliding Mechanism for Collinear Reduction Clamp and implants approved by the AO Foundation 5/11

38 5-37 Collinear Reduction Clamp Components continued Hohmann-Style Arm 183 mm, for Collinear Reduction Clamp Pelvic Arm 225 mm, for Collinear Reduction Clamp Percutaneous Arm 255 mm, for Collinear Reduction Clamp Bone Hook-Shape Arm, 206 mm LCP Reduction Attachment R 5/11

39 5-38 Collinear Reduction Clamp Components continued Reduction Attachment Combined Aiming Device Components Small Pointed Hook For cruciate ligament Offset Pointed Hook For femoral neck Hook For external fixator Large Hook For knee and implants approved by the AO Foundation 5/11

40 5-39 Combined Aiming Device Components continued Locking Sleeve Drill Sleeves for use with Combined Aiming Device mm Drill Sleeve mm Drill Sleeve mm Drill Sleeve 110 mm, for external fixator mm Drill Sleeve mm Drill Sleeve with two parallel holes for Combined Aiming Device mm Trocar, 110 mm length for Combined Aiming Device Measuring Bar Forked Impactor For Offset Pointed Hook (333.38) Check Tube To check the alignment of the drill guide to the hook R 5/11

41 5-40 Conical Extraction Screws Conical Extraction Device for Threaded Washers For use with 3.0 mm Cannulated Screw System Conical Extraction Screw, for 1.5 mm and 2.0 mm Cortex Screws Conical Extraction Screw, for 2.7 mm and 3.5 mm Cortex Screws Conical Extraction Screw, for large screws and 4.9 mm bolts Conical Extraction Screw Cutters Small Wire Cutter, 160 mm length For use with Kirschner wires up to 1.5 mm dia Small Wire Cutter, 230 mm length For use with Kirschner wires up to 1.25 mm dia Medium Wire Cutter For wires up to 1.25 mm dia. 160 mm length and implants approved by the AO Foundation 5/11

42 5-41 Cutters continued Wire Cutter, 220 mm length For use with Kirschner wires up to 2.5 mm dia. Distractors Medium Distractor Components of the Medium Distractor mm Threaded Spindle, 360 mm mm Threaded Spindle, 260 mm Spindle Nut R 5/11

43 5-42 Distractors continued Sliding Carriage End Piece with Double Joint Holding Sleeve, 45 mm Holding Sleeve, 85 mm Large Distractor and Large Distractor Complete Accepts 4.5 mm, 5.0 mm or 6.0 mm Schanz Screws and implants approved by the AO Foundation 5/11

44 5-43 Distractors continued Components of the Large Distractor mm Threaded Spindle, 480 mm length mm Threaded Spindle, 330 mm length Spindle Nut Sliding Carriage End piece with double joint Holding Sleeve, 55 mm length Holding Sleeve, 105 mm length R 5/11

45 5-44 Drill Bits Drill Bits mm Drill Bit, quick coupling, 195 mm For 3.5 mm Cortex Screws, 3.5 mm Shaft Screws and predrilling for fixation pins J 2.0 mm Drill Bit, Jacobs chuck, 110 mm For 2.0 mm and 2.7 mm Cortex Screws J 6.0 mm Drill Bit, Jacobs chuck, 195 mm For Combined Aiming Device Set (130.30J) Quick Coupling Jacobs chuck Coupling and implants approved by the AO Foundation 5/11

46 5-45 Drill Bits continued Cannulated Drill Bits Diameter Cannulation Total Length mm 2.7 mm 190 mm mm 2.7 mm 190 mm mm 2.7 mm 190 mm mm 2.7 mm 190 mm mm 2.7 mm 190 mm mm 2.7 mm 190 mm mm 2.7 mm 190 mm R 5/11

47 5-46 Drill Bits continued S 4.0 mm Carbide Drill Bit, sterile S 6.0 mm Carbide Drill Bit, sterile Drill Bit Extensions mm Carbide Drill Bit Extension mm Carbide Drill Bit Extension Drill Sleeve Assemblies mm/5.0 mm Threaded Drill Sleeve, 98 mm (long) mm/3.5 mm Drill Sleeve, 107 mm (long) mm Trocar, 118 mm (long) mm/5.0 mm Drill Sleeve, 130 mm length For use with Curved Aiming Attachment (355.80) mm/3.5 mm Drill Sleeve, 140 mm length For use with 6.0 mm/5.0 mm Drill Sleeve (355.89) mm Trocar, 150 mm length For use with 5.0 mm/3.5 mm Drill Sleeve ( and implants approved by the AO Foundation 5/11

48 5-47 Elevators Periosteal Elevators, with 200 mm handle mm width, curved blade mm width, curved blade mm width, straight blade mm width, straight blade Periosteal Elevators mm width, straight blade, straight edge mm width, straight blade, round edge mm width, curved blade, round edge mm width, straight blade, round edge R 5/11

49 5-48 Elevators continued Periosteal Elevators mm width, curved blade, straight edge mm width, curved blade, round edge Freer Elevator, 195 mm Scaphoid Elevator, 140 mm Extraction Bolts for Screw Removal Extraction Bolts For removal of broken screws With internal left-hand thread which bites into screw during unthreading Used with T-Handle, with quick coupling (311.44) For 1.5 mm Cortex Screws For 2.0 mm Cortex Screws For 2.7 mm Cortex Screws and 3.0 mm Cannulated Screws For 3.5 mm Cortex Screws, 4.0 mm Cancellous Bone Screws and 3.5 mm and 4.0 mm Cannulated Screws For 4.5 mm Cortex Screws and 4.5 mm Cannulated Screws and 5.0 mm screws For 6.5 mm Cancellous Bone Screws and 7.0 mm Cannulated Screws and 6.0 mm screws Femoral Head Templates Femoral Head Templates mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter mm diameter and implants approved by the AO Foundation 5/11

50 5-49 Forceps Bone Holding Forceps A Bone Holding Forceps, angled, serrated jaw, 10 mm, 135 mm length, speed lock B Bone Holding Forceps, angled, serrated jaw, 10 mm, 190 mm length, speed lock C Bone Holding Forceps, straight, serrated jaw, 10 mm, 180 mm length, speed lock D Bone Holding Forceps, straight, serrated jaw, 15 mm, 220 mm length, speed lock E Bone Holding Forceps, straight, serrated jaw, 20 mm, 240 mm length, speed lock F Bone Holding Forceps, straight, serrated jaw, 27 mm, 260 mm length, speed lock R 5/11

51 5-50 Forceps continued Self-Centering Bone Forceps with Speed Lock For small fragments, 150 mm length, serrated jaw, 9 mm Size 0, 190 mm length, extra small serrated jaw, 10 mm Size 1, 240 mm length, small serrated jaw, 14 mm Size 2, 260 mm length, medium serrated jaw, 18 mm Size 3, 280 mm length, large serrated jaw, 23 mm Plate Holding Forceps with swivel foot Size 0, 190 mm length For use with 2.7 mm and 3.5 mm plates Size 1, 240 mm length For use with 3.5 mm plates Size 2, 260 mm length For use with 4.5 mm plates (narrow and broad) Size 3, 280 mm length For use with DHS, DCS and Angle Blade plates mm length For use with 1.5 mm to 2.4 mm plates and implants approved by the AO Foundation 5/11

52 5-51 Forceps continued Medium Large Periarticular Reduction Forceps For minimally invasive reduction of intra- and periarticular fractures May be used with Spiked Disk (398.71) Spiked Disk For use with , , , , and Patella Forceps 175 mm length Percutaneous Reduction Forceps and Components Percutaneous Reduction Forceps, complete Consists of ( ): Percutaneous Reduction Forceps Trocar Plastic Trocar mm Drill Guide mm Drill Guide mm Drill Guide mm Drill Guide mm Drill Guide R 5/11

53 5-52 Forceps continued Straight Forceps For fibula, 210 mm length Bent Forceps For fibula, 210 mm length Holding Forceps For tibial edge fragments, 210 mm length Malleolar Forceps With two points, 210 mm length Reduction Forceps with points Narrow, 132 mm length, ratchet and implants approved by the AO Foundation 5/11

54 5-53 Forceps continued Reduction Forceps with points Broad, 132 mm length, ratchet Reduction Forceps with sliding jaws 140 mm length Foot, for mini plates and larger fragments Point, for small fragments Reduction Forceps with narrow jaws 240 mm length, speed lock (replaces ) Reduction Forceps 180 mm length, speed lock Reduction Forceps with points Speed Lock, 130 mm length Speed Lock, 205 mm length R 5/11

55 5-54 Forceps continued Reduction Forceps with serrated jaw Speed Lock, 132 mm length PHOTO NOT AVAILABLE Bone Holding Forceps For plates to 7 mm wide For plates to 14 mm wide For plates to 19 mm wide For plates to 22 mm wide Patella Forceps Reduction Forceps with points, medium handle Reduction Forceps with serrated jaw, medium handle with serrated jaw, large handle and implants approved by the AO Foundation 5/11

56 5-55 Forceps continued Small Screw Removal Forceps Large Screw Removal Forceps Forceps for broken screw removal Holding Forceps, 170 mm length For cerclage wires Long Forceps, 230 mm length For cerclage wires R 5/11

57 5-56 Forceps continued Forceps For use with Cerclage Buttons and Positioning Pins Soft Tissue Spreader Forceps Gauges Gauge For drill bits, screws, Kirschner wires and Steinmann pins Gouges Gouges For cancellous bone grafts, 250 mm length mm width, straight mm width, straight (standard size) mm width, straight mm width, curved mm width, curved mm width, curved and implants approved by the AO Foundation 5/11

58 5-57 Gouges continued Hollow Gouge for broken screw exposure Hammers Hammers Weight approx. 100 grams Weight approx. 350 grams Weight approx. 500 grams Standard size Weight approx. 700 grams Handles Handle with mini quick coupling, stainless steel For use with Taps, Countersinks and Screwdriver Shafts with mini quick coupling Handle with mini quick coupling For use with Taps, Countersinks, and Screwdriver Shafts with mini quick coupling Handle with quick coupling, small For use with Taps, Countersinks and Screwdriver Shafts with quick coupling Large Handle with quick coupling R 5/11

59 5-58 Hollow Reamers Hollow Reamers, complete To expose broken screws Cut counterclockwise Used with T-Handle, with quick coupling (311.44) Hollow Reamer, complete, for 1.5 mm Cortex Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hollow Reamer, complete, for 2.0 mm Cortex Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hollow Reamer, complete, for 2.7 mm Cortex Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hollow Reamer, complete, for 3.5 mm Cortex, 3.5 mm Cannulated and 4.0 mm Cancellous Bone Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hollow Reamer, complete, for 4.5 mm Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hollow Reamer, complete, for 6.5 mm Cancellous Bone and 7.0 mm Cannulated Screws (replaces ) Spare Centering Pin, for Hollow Reamer ( ) Spare Reamer Tube, for Hollow Reamer ( ) Hooks Straight Sharp Hook Sharp Hook For checking alignment of fracture ends and removing ingrown tissue in screw heads Medium Bone Hook For tibia and pelvis, 230 mm length and implants approved by the AO Foundation 5/11

60 5-59 Impactors Impactor Interchangeable Gouges, Chisels, and Bone Impactors Handle for gouges and chisels, quick coupling For use with through Cancellous Bone Impactors For use with Handle (397.70) mm, round, curved mm, flat, curved mm, round mm x 16 mm, rectangular mm x 20 mm, rectangular mm x 30 mm, rectangular R 5/11

61 5-60 Interchangeable Gouges, Chisels, and Bone Impactors continued Interchangeable Chisels For use with Handle (397.70) Straight, 4 mm blade width Straight, 8 mm blade width Straight, 16 mm blade width Straight, 20 mm blade width Curved, 16 mm blade width Gouges For use with Handle (397.70) Straight, 5 mm width Straight, 10 mm width Straight, 15 mm width Curved, 5 mm width Curved, 10 mm width Curved, 15 mm width and implants approved by the AO Foundation 5/11

62 5-61 Interchangeable Gouges, Chisels, and Bone Impactors continued Round Rasps For use with Handle (397.70) Half-round Large Distractor/Compressor Large Distractor/Compressor span 60 mm Osteotomes Osteotomes, 150 mm length Width Width mm mm mm Straight Pelvic Osteotomes mm blade width mm blade width R 5/11

63 5-62 Osteotomes continued Angled Pelvic Osteotomes mm blade width mm blade width Short Angled Pelvic Osteotome, 15 mm blade width Bayonette Pelvic Osteotomes mm blade width mm blade width Flag Pelvic Osteotome, 20 mm blade width Curved Pelvic Osteotomes mm blade width mm blade width Pelvic Osteotomes Osteotome, 15 mm blade width, for periacetabular procedures Osteotome, 20 mm blade width, for periacetabular procedures and implants approved by the AO Foundation 5/11

64 5-63 Pelvic C-Clamp II and Components Pelvic C-Clamp II, complete Consists of items shown below Inner Rail, for Pelvic C-Clamp II Outer Rail, for Pelvic C-Clamp II Upper Side Arm, for Pelvic C-Clamp II Lower Side Arm, for Pelvic C-Clamp II Threaded Tube, for Pelvic C-Clamp II mm K-Wire Insertion Handle Socket Wrench with Hammer R 5/11

65 5-64 Pelvic C-Clamp Pelvic C-Clamp Consists of items shown below ea ea ea Rail Extension Rod for Rail Connecting Screw Side Strut B C Side Strut A D (shown with Threaded Tube, ) Nail Nail Elongation Threaded Tube and implants approved by the AO Foundation 5/11

66 5-65 Pliers Wire-Bending Pliers, 160 mm length For bending/holding cerclage and Kirschner wires Flat-Nosed Parallel Pliers, 160 mm length Locking Pliers, 180 mm length Maximum opening 34 mm dia Narrow Screw Removal Pliers Protective Caps Protective Caps for Kirschner wires (10/pkg.) For 1.0 mm/1.25 mm Kirschner wires For 1.6 mm Kirschner wires For 2.0 mm Kirschner wires R 5/11

67 5-66 Retractors Retractors (Hohmann-Style) * 6 mm width, small, short narrow tip, 160 mm length ** 8 mm width, short narrow tip, 220 mm length ** 18 mm width, short narrow tip, 235 mm length mm width, narrow tip, 240 mm length mm width, narrow tip, 240 mm length mm width, long shank, angled, 235 mm length mm width, wide tip, 250 mm length mm width, wide tip, 284 mm length mm width, long wide tip, 270 mm length For hip surgery * For Small Fragment Instrumentation **For Basic and Angled Blade Plate Instrumentation and implants approved by the AO Foundation 5/11

68 5-67 Retractors continued Retractors (Hohmann-Style) mm, 30 curved, left mm, 30 curved, right Humeral Head Retractor, 220 mm length Spoon Retractor medium, 268 mm Spoon Retractor large, 323 mm Sciatic Nerve Retractor 190 mm working length Sciatic Nerve Retractor long, 290 mm working length R 5/11

69 5-68 Retractors continued Malleable Retractors, 330 mm long mm wide mm wide mm wide Blunt Pelvic Aluminum Retractors Hohmann, 18 mm width Hohmann, 24 mm width Hohmann, 35 mm width Aluminum Hohmann Retractor, 8 mm, short narrow tip Aluminum Hohmann Retractor, 22 mm wide tip Spoon, medium Spoon, large and implants approved by the AO Foundation 5/11

70 5-69 Retractors continued Soft Tissue Spreader Retractors mm, right mm, left mm, right mm, left Soft Tissue Spreader Trocars mm mm Delta Retractor Delta Retractor, pointed Bone Retractor, humeral head Ring Retractor R 5/11

71 5-70 Retractors continued Ring Retractor, narrow Ring Retractor, drop-shaped Ring Retractor, drop-shaped, narrow Ring Retractor, delta-shaped and implants approved by the AO Foundation 5/11

72 5-71 Screwdrivers StarDrive Screwdriver Shaft, T15 self-retaining, quick coupling If necessary, use Holding Sleeve ( ). StarDrive Screwdriver Shafts, T25 self-retaining, quick coupling mm, for 4.0 mm and 5.0 mm Locking Screws For use with Torque Limiting Attachment ( ) mm Cannulated StarDrive Screwdriver T40, self-retaining For Tibial and Femoral Nails-EX Hexagonal Screwdriver 3.5 mm width across flats For use with 7.5 mm Flexible Shaft (396.34) Small Hexagonal Screwdriver Shaft, long (165 mm) 2.5 mm width across flats For 3.5 mm Cortex and 4.0 mm Cancellous Bone Screws Large Hexagonal Screwdriver Shaft, long (165 mm) 3.5 mm width across flats For use with 4.5 mm Cortex and 6.5 mm Cancellous Bone Screws Large Hexagonal Screwdriver with T-Handle 3.5 mm width across flats For 4.5 mm Cortex, 6.5 mm Cancellous Bone Screws, 4.5 mm and 7.0 mm Cannulated Screws and 4.9 mm Locking Bolts Note: Used only for screw removal requiring greater then normal force The Large Hexagonal Screwdriver (314.27) fits into the hollow shaft, giving better leverage R 5/11