Thank you for choosing Philips.

Transcription

1 DVD DVD VIDEO PLAYER DVP5160 Thank you for choosing Philips. Need help fast? Read your User s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at _dvp5160_12_eng2.indd :06:55 PM

2 _dvp5160_12_eng2.indd :07:03 PM

3 Index Français Español Deutsch Deutsch Español Français Nederlands Nederlands This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Go to for software upgrade _dvp5160_12_eng2.indd :07:03 PM

4 General Information Environmental Information All unnecessary packaging has been omitted. The packaging has been made easy to separate into two materials; cardboard (box) and polyethylene (bags, protective foam sheet). Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Laser Safety This unit employs a laser. Due to possible eye injury, only a qualifi ed service person should remove the cover or attempt to service this device. NOTE: Pictures shown maybe different between countries. CAUTION: WARNING LOCATION: ON THE BACKPLATE OF THE SET NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. Manufactured under license from Dolby Laboratories, Dolby and the double-d symbol are trademarks of Dolby Laboratories. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. Specifi cations are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. This product complies with the radio interference requirements of the European Community. This product complies with the requirements of the following directives and guidelines: 73/23/EEC + 89/336/EEC + 93/68/EEC DivX Ultra Certified products: DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license. 4 For Customer Use: Read carefully the information located at the bottom or rear of your DVD Video player and enter below the Serial No. Retain this information for future reference. Model No. DVP 5160 Serial No. LASER Type Wave length Output Power Semiconductor laser InGaAlP (DVD) AIGaAs (CD) 658 nm (DVD) 790 nm (CD) 7.0 mw (DVD) 10.0 mw (VCD/CD) Beam divergence 60 degrees 01-51_dvp5160_12_eng2.indd :07:05 PM

5 Language Code _dvp5160_12_eng2.indd :07:05 PM

6 Contents Care and Safety Information Setup...8 Cleaning discs...8 General Information Accessories supplied...9 Region codes...9 Connections Connecting to television... 10~12 Using SCART sockets Using Composite Video sockets (CVBS) Using Component Video sockets (YPbPr)...11 Using an accessory RF modulator Connecting the power cord...13 Optional connections Connecting to a stereo system...14 Stereo system has right/left Audio In sockets Connecting to a digital AV receiver...14 Receiver has a PCM, Dolby Digital or MPEG decoder Connecting a USB Flash Drive or USB mass storage device Using USB port Product Overview Front and Rear Panels...16 Remote Control...17 Getting Started Step 1: Inserting Batteries Using the remote control to operate the system Step 2: Finding your viewing channel Step 3: Setting up Progressive Scan feature...19 Step 4: Selecting the matching colour system Step 5: Setting the language On-screen display (OSD) language Audio, Subtitle and Disc menu languages...21 Playback from Disc Playable discs Supported formats Playback Features Starting disc playback Basic playback controls Pausing playback Selecting title/chapter/track Stopping playback Operations for video playback Using the Disc Menu Zooming in Resuming playback from the last stopped point Slow Motion Forward / Reverse Searching Selecting various repeat functions Repeat play mode Repeating a section within a chapter/track...25 Viewing the disc playback information...26~27 Using the OSD menu Title/Chapter/Track selection Time Search Audio/Subtitle _dvp5160_12_eng2.indd :07:05 PM

7 Contents Angle Time Display Preview Viewing Audio CD playback information Disc Go To / Track Go To / Track Selection Special DVD Features Playing a Title Changing the Audio Language Subtitles Special VCD and SVCD Feature Playback Control (PBC) Playing a DivX disc USB mass storage device Compatibility of USB device Playing from USB flash drive or USB memory card reader...31 Playing MP3/WMA/JPEG Picture CD General Operation Playback selection Playback with multi-angles (JPEG) Preview Function (JPEG) Zoom picture (JPEG) Playing MP3/WMA music and JPEG picture simultaneously DVD Menu Options Using the General setup menu...34~35 Locking / Unlocking the disc for viewing OSD Language Sleep DivX VOD registration code Using the Audio setup menu...36~38 Analog Output Digital Audio Setup...36~37 Sound Mode CD Upsampling Night Mode turning on/off Using the Video setup menu...39~41 TV Type Setting the TV Display Progressive...40 Picture Setting... 40~41 Component Using the Preference setup menu...42~45 Subtitle / Audio / Disc Menu Parental PBC MP3/JPEG Menu Changing the Password...44 Setting the DivX subtitle font...44 Restoring to the original settings Others Software upgrade Specifications Troubleshooting...48~49 Frequently Asked Questions (USB) Glossary _dvp5160_12_eng2.indd :07:05 PM

8 Care and Safety Information DANGER! High voltage! Do not open the device. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel. Setup Finding a suitable location Place the set on a fl at, hard and stable surface. Do not place the set on a carpet. Do not put any equipment or heavy objects on top of the set. Do not position the set on top of other equipment that might heat it up (such as receiver or amplifi er). Do not put anything under the set (such as CDs, magazines). Install this unit near the AC outlet and where the AC power plug can be reached easily. Space for ventilation Place the apparatus in a location with adequate ventilation to prevent internal heat build up. Allow at least 10 cm (4.0 ) clearance from the rear and the top of the set and 5cm (2.0 ) from the left and right to prevent overheating. Cleaning discs Some problems occur because the disc inside the player is dirty (frozen picture, sound disruptions, picture distortions). To avoid these problems, discs should be cleaned on a regular basis. To clean a disc, use a micro fi bre cleaning cloth and wipe the disc from the center to the edge in a straight line. CAUTION! Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static sprays intended for analog discs. Since the optical unit (laser) of the DVD player operates at a higher power than regular DVD or CD players, cleaning CDs intended for DVD or CD players may damage the optical unit (laser). Therefore, refrain from using a cleaning CD. 5cm (2.0") 10cm (4.0") 10cm (4.0") 5cm (2.0") 8 Avoid high temperatures, moisture, water and dust Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (such as liquid fi lled objects, lighted candles) _dvp5160_12_eng2.indd :07:05 PM

9 General Information Accessories supplied Remote control and two AAA batteries Region codes This DVD player is designed to support the Region Management System. Check the regional code number on the disc package. If the number does not match the player s region number (see table below), the player may be unable to playback the disc. Tips: It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or condition of the recording. If you are having trouble playing a certain disc, remove the disc and try a different one. Improper formatted disc will not played on this DVD player. Region U.S.A. and Canada regions Discs that can be played ALL 1 U.K and Europe regions ALL 2 Asia Pacifi c, Taiwan, Korea ALL 3 Australia, New Zealand, Latin America ALL 4 Russia and India regions ALL 5 China, Calcos Islands, Walls and Futuna Islands ALL _dvp5160_12_eng2.indd :07:05 PM

10 AUDIO IN S-VIDEO IN VIDEO IN TV IN S-VIDEO IN VIDEO IN COMPONENT VIDEO IN V (Pr/Cr) U (Pb/Cb) Y AUDIO OUT Connections Connecting to television S-VIDEO IN AUDIO IN TV IN COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN U (Pb/Cb) VIDEO IN VIDEO IN Y VIDEO OUT DIGITAL OUT VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT IMPORTANT! You only need to make one video connection from the following options, depending on the capabilities of your television. Connect the DVD player directly to the television. A SCART connection will let you use features both audio and video on the DVD player. Using SCART sockets A Use the SCART cable to connect the DVD player s SCART socket (TV OUT) to the corresponding Scart input sockets on the TV (cable not supplied). Using Composite Video sockets (CVBS) A Use the composite video cable (yellow) to connect the DVD player s VIDEO OUT (CVBS) socket to the video input socket (or labeled as A/V In, Video In, Composite or Baseband) on the television (cable not supplied). B To hear sound of this DVD player through your television, use the audio cables (white/red) to connect AUDIO OUT (L/R) sockets of the DVD player to the corresponding AUDIO IN sockets on the television (cable not supplied). Tip: Ensure that the TV indication on SCART cable is connected to the television and DVD indication on SCART is connected to the DVD player. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:06 PM

11 COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO OUT VIDEO IN U (Pb/Cb) Y Connections (continued) COMPONENT VIDEO IN S-VIDEO IN V (Pr/Cr) AUDIO IN VIDEO IN U (Pb/Cb) Y 1 2 VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT IMPORTANT! The progressive scan video quality is only possible when using YPbPr and a progressive scan television is required. Using Component Video sockets (YPbPr) A Use the component video cables (red/ blue/green) to connect the DVD player s YPbPr sockets to the component video input sockets (or labeled as YPbPr) on the television (cable not supplied). B To hear sound of this DVD player through your television, use the audio cables (white/red) to connect AUDIO OUT (L/R) sockets of the DVD player to the corresponding AUDIO IN sockets on the television (cable not supplied). C Proceed to page 19 for detailed progressive scan setup. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:06 PM

12 ANT IN Connections (continued) RF coaxial cable to TV ANT IN ANT IN TO TV VIDEO IN 2 Back of RF Modulator (example only) AUDIO IN R L CH3 CH VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT IMPORTANT! If your television only has a single Antenna In socket (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the television. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator A Use the composite video cable (yellow) to connect the DVD player s VIDEO OUT (CVBS) socket to the video input socket on the RF modulator. B Use the RF coaxial cable (not supplied) to connect ANTENNA OUT or TO TV socket on the RF modulator to the ANTENNA IN socket on the television. C To hear sound of this DVD player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) sockets of the DVD player to the corresponding AUDIO IN sockets on the RF modulator (cable not supplied). D Connect the Antenna or Cable TV service signal to the ANTENNA IN or RF IN socket on the RF modulator. (It may have been connected to your TV previously. Disconnect it from the TV). TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:06 PM

13 Connections (continued) Connecting the power cord VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. When no disc is loaded, press STANDBY-ON on the DVD player front panel. may appear on the display panel. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:06 PM

14 Optional connections Connecting to a stereo system Connecting to a digital AV receiver STEREO AUDIO IN AV Receiver AUDIO IN DIGITAL DIGITAL VIDEO OUT DIGITAL OUT VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT Stereo system has right/ left Audio In sockets A Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television. B Use the audio cables (white/red) to connect AUDIO OUT (L/R) sockets of the DVD Player to the corresponding AUDIO IN sockets on the stereo system (cable not supplied). Receiver has a PCM, Dolby Digital or MPEG decoder A Select one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television. B Connect the COAXIAL socket of the DVD player to the corresponding Digital Audio In socket on your receiver (cable not supplied). C Set the DVD player s digital output to PCM-Only or ALL depending on the capabilities of your receiver (see page 37 {Digital Output}). Tip: If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:07 PM

15 Optional connections (continued) Connecting a USB Flash Drive or USB mass storage device USB extension cable (Optional accessory - not supplied) Using USB port You can only view the content of following supported USB devices through this DVD player. A Connect the supported USB device directly to the USB port on the front panel (as shown on the above illustration). B Press USB button on the remote control in order to view the fi les stored in the supported USB device. C Stop the playback before removing the supported USB device from the USB port. Tips: The USB port supports playback of JPEG/ MP3/WMA fi les. Not all Portable audio/video players and Digital cameras are supported. While connected to a card reader, only one card can be read at the same time. If non-supported USB device is plugged in, Device Not Supported will be displayed. If the USB device does not fi t into the USB port, a USB extension cable is required. The format FAT16, FAT32 can be supported by USB and not NTFS. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet _dvp5160_12_eng2.indd :07:07 PM

16 Product Overview Front and Rear Panels STANDBY-ON 2 Turns on the player or switches to standby mode Disc Tray OPEN/CLOSE ç Opens or closes the disc tray. Display panel Shows information about the current status of the DVD player. USB Port Input of the supported USB device STOP Stops playback PLAY/PAUSE u Starts or pauses playback. SMART PICTURE To toggle between Standard, Vivid, Cool and Personal. IR Sensor Point the remote control towards this sensor Mains ~ (AC Power Cord) Connect to a standard AC outlet VIDEO OUT (CVBS) Connect to CVBS Video input of a television YPbPr (Component Video Out) Connect to YPbPr input of a television TV OUT (SCART) Connect to SCART input of a television Audio Out (Left/Right) Connect to AUDIO inputs of an amplifi er, receiver or stereo system COAXIAL (Digital audio out) Connect to coaxial AUDIO input of a digital audio equipment VIDEO OUT DIGITAL OUT COMPONENT VIDEO OUT COAXIAL AUDIO OUT _dvp5160_12_eng2.indd :07:08 PM

17 Product Overview (continued) Remote Control DISC MENU Enters or exits the disc contents menu Switches on or off the playback control mode (for VCD 2.0 only) 2 To switch the DVD player to standby mode or ON DISPLAY Displays information on TV screen during playback OK Confi rms an entry or selection RETURN/TITLE To go back to previous menu/ show title menu PREV í Skips to the previous title/ chapter/ track Press and hold to fast backward STOP Stops playback u PLAY/PAUSE Starts or pauses playback SUBTITLE Selects a subtitle language of the playing disc (DVD) ZOOM Enlarge a picture on the TV screen REPEAT Select various repeat mode REPEAT A-B Repeat playback a specifi c section on a disc Cursor buttons for moving to the left or right, do a fast forward/reverse search. Cursor buttons for moving up/down, do a slow forward/backward SETUP Enters or exits the system setup menu NEXT ë Skips to the next title/ chapter/track Press and hold to fast forward USB Access the content of the connected USB device and exit from USB mode Alphanumeric keypad Selects numbered items in a menu AUDIO Selects an audio language (DVD/VCD) or an audio channel _dvp5160_12_eng2.indd :07:08 PM

18 Getting Started Step 1 : Inserting Batteries Step 2 : Finding your viewing channel A Open the battery compartment. B Insert two batteries type R03 or AAA, following the indications (+ ) inside the compartment. C Close the cover. CAUTION! Remove batteries if they are exhausted or if the remote is not to be used for a long time. Do not use old and new or different types of batteries in combination. Batteries contain chemical substances, so they should be disposed of properly. Using the remote control to operate the system A Press STANDBY-ON 2 on the DVD player to turn it on. B Turn on the TV and set it to the correct video-in channel. You should see the blue DVD background screen. Usually these channel are between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO. See your TV s manual for more details. Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. Or, the TV remote control may have a button or turn that chooses different video modes. Or, set the TV to channel 3 or 4 if you are using an RF modulator. C If you are using external equipment, (such as audio system or receiver), turn it on and select the appropriate input source for the DVD player output. Refer to the equipment user s manual for detail. A Aim the remote control directly at the remote sensor (IR) on the front panel. B Do not put any objects between the remote control and the DVD player while operating the DVD player _dvp5160_12_eng2.indd :07:08 PM

19 Step 3 : Setting up Progressive Scan feature (for Progressive Scan TV only) The progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. Before you start... Ensure that you have connected this DVD player to a progressive scan TV using the YPbPr connection (see page 11). Ensure that you have completed the basic installation and setup. Getting Started (continued) H Select { On }, then press OK to confi rm. The menu will appear on the TV. ACTIVATING PROGRESSIVE SCAN: 1.ENSURE YOUR TV HAS PROGRESSIVE SCAN. 2.CONNECT USING YPBPR(GBR) VIDEO CABLE. 3.IF THERE IS A DISTORTED PICTURE, WAIT 15 SECONDS FOR AUTO RECOVERY. OK CANCEL I Press to highlight { OK } and press OK to confi rm. J Turn on your TV progressive scan mode (refer to your TV user manual). The menu will appear on the TV. CONFIRM AGAIN TO USE PROGRESSIVE SCAN. IF PICTURE IS GOOD, PRESS OK BUTTON ON REMOTE. OK CANCEL A Turn on your TV and set to interlace mode (refer to your TV user manual). B Press STANDBY-ON 2 on the remote control to turn on the DVD player. C Select the correct video-in channel. The DVD background menu appears. D Press SETUP. E Press to select { Video Setup Page }. Video Setup Page TV Type TV Display Progressive Picture Setting Component On Off F Select { Component } to { Interlaced }, then OK to confi rm. G Press repeatedly to select { Progressive }, then press. K Press to highlight { OK } and press OK to confi rm. The setup is now completed and you can start enjoy the high quality picture. To deactivate Progressive Scan manually: Wait for 15 seconds for the auto recovery. OR A Press OPEN/CLOSE ç on the DVD player to open the disc tray. B Press numeric keypad 1 on the remote control for few seconds. The DVD background screen appears. Tip: There are some progressive scan TVs and High-Defi nition TVs that are not fully compatible with this unit, resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV. TIPS: The underlined option is the factory default setting. Press to go back to previous menu item. Press SETUP to exit the menu item _dvp5160_12_eng2.indd :07:08 PM

20 Getting Started (continued) Step 4 : Selecting the matching colour system The colour system of the DVD player, disc and TV should match in order for the disc to play. Before changing the TV system, determine the colour system of your TV. E Select a setting and press OK. Follow the instructions show on the TV to confi rm the selection. CHANGING PAL TO NTSC: 1.ENSURE THAT YOUR TV SUPPORTS NTSC STANDARD. 2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVERY. OK CANCEL Video Setup Page TV Type TV Display Progressive Picture Setting Component PAL MULTI NTSC CONFIRM AGAIN TO USE NEW TV TYPE SETTING. OK CANCEL F Press to highlight { OK } and press OK to confi rm. A Press SETUP. B Press to select { Video Setup Page }. C Press repeatedly to select { TV Type }, then press. D Use to select one of the options below: { PAL } Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format. { NTSC } Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format. { Multi } Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc. To reset to previous TV colour system: Wait for 15 seconds for the auto recovery. OR A Press OPEN/CLOSE ç on the DVD player to open the disc tray. B Press numeric keypad 3 on the remote control for few seconds. The DVD background menu appears. Tips: Before changing the current TV colour setting, ensure that your TV supports the selected TV Type system. If there is no proper picture on your TV, wait for 15 seconds for auto recovery. TIPS: 20 The underlined option is the factory default setting. Press to go back to previous menu item. Press SETUP to exit the menu item _dvp5160_12_eng2.indd :07:09 PM

21 Getting Started (continued) Step 5 : Setting the language The language options are different depending on your country or region. It may not correspond to the illustrations shown on the user manual. On-screen display (OSD) language Select this to change the language of this DVD player screen display menu. The menu language (on-screen display) for the system will remain as you set it. General Setup Page Disc Lock OSD Language Sleep DivX(r) VOD Code A Press SETUP. ENGLISH DEUTSCH NEDERLANDS FRANÇAIS ITALIANO SVENSKA B Press to select { OSD Language }, then press. C Use to select a language and press OK to confi rm. Audio, Subtitle and Disc menu languages You can choose your preferred language or sound track from audio, subtitles and disc menu languages. If the selected language is not available on the disc, the disc s default language will be used instead. Preference Page Audio Subtitle Disc Menu Parental PBC Mp3 / Jpeg Nav Password Chinese French Spanish Portuguess Polish Italian A Press STOP Ç twice to stop playback, (if any), then press SETUP. B Press to select { Preference Page }. C Press to highlight one of the options below, then press. { Audio } Select this to change disc sound track language. { Subtitle } Select this to change the subtitle language. { Disc Menu } Select this to change the language of the disc menu. D Use to select a language and press OK to confi rm. If the language you want is not in the list, then select { Others }, then use the numeric keypad (0-9) on the remote to enter the 4-digit language code XXXX (see page 5 Language Code ) and press OK. E Repeat steps C - D for other language settings. TIPS: The underlined option is the factory default setting. Press to go back to previous menu item. Press SETUP to exit the menu item _dvp5160_12_eng2.indd :07:09 PM

22 Playback from Disc IMPORTANT! If the inhibit icon appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is for the same zone as your player. Playable discs Using this DVD player, you can playback on the following discs: DVD Video (Digital Versatile Disc) DVD±RW (DVD Rewritable) Audio/Video format or MP3/WMA/JPEG/DivX fi les. DVD±R (DVD Recordable) Audio/Video format or MP3/WMA/JPEG/DivX fi les. MP3-Disc DivX Disc (DivX 3.11, 4.x, 5.x, 6.0 and DivX Ultra) Supported formats MP3/WMA tracks The fi le extensions has to be.mp3,.wma JPEG/ISO format Maximum 14 characters display. Supported bit-rate; kbps (MP3) kbps (WMA) JPEG pictures The fi le extensions has to be.jpg and not.jpeg. JPEG/ISO format It can only display DCF-standard still pictures or JPEG pictures such as TIFF. CD-R (CD-Recordable) Audio/Video format or MP3/WMA/JPEG/DivX fi les. CD-RW (CD-Rewritable) Audio/Video format or MP3/WMA/JPEG/DivX fi les. Audio CD (Compact Disc Digital Audio) Video CD (Formats 1.0, 1.1, 2.0) Super Video CD DivX movies The fi le extensions has to be.avi,.mpg, or.mp4. DivX 3.11, 4.x, 5.x, 6.0 and DivX Ultra Q-pel accurate motion compensation Global Motion Compensation (GMC) playback. Tips: Maximum 100 sessions for CD and 10 multi border for DVD are supported. For DVD-R and DVD-RW multi border, only fi nalised disc are supported. For DVD+R and DVD+RW multi border both fi nalised and unfi nalised disc are NOT supported. TIPS: Some discs cannot be played on this DVD player due to the configuration and characteristics of the disc, or due to the condition of recording and authoring software that was used _dvp5160_12_eng2.indd :07:09 PM

23 Playback Features Starting disc playback A Turn on the TV to the correct program number for the DVD player (e.g. EXT, 0, AV ). B Press STANDBY-ON 2 to turn on the DVD player. C Press OPEN/CLOSE ç on the front of the DVD player. You can also hold down the STOP button on the remote control to open and close the disc tray. D Place a disc into the disc tray with the label facing up, then press OPEN/ CLOSE ç. For double-sided discs, load the side which you want to play facing up. E Playback may start automatically. If not, press PLAY/PAUSE u. If a disc menu appears on the TV, see page 24 'Using the Disc Menu'. If the child lock was activated for the inserted disc, you have to enter your sixdigit password (see page 44). For more playback features, see pages 23~33. Tips: Do not overturn the DVD player while disc loading, playing or ejecting. Do not close the disc tray manually even if the power switched off. Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback A During playback, press PLAY/PAUSE u to pause playback and display a still picture. Sound will be muted. B To resume normal playback, press PLAY/PAUSE u again. Selecting title/chapter/track During playback, press PREV í to go to the beginning of the currect chapter/ track, press PREV í again to go to the previous title/chapter/track. Press NEXT ë to go to the next chapter/track. Press DISPLAY to display the disc information text line for title/chapter/ track (example - 00/08). Use alphanumeric keypad (0-9) to enter valid title/chapter/track number. The playback skips to the selected title/chapter/track. Stopping playback Press STOP. Tips: Screen saver will start automatically if the disc playback is stopped/paused for about 5 minutes. The player will automatically switch to Power Standby mode if you do not press any buttons for about 15 minutes after the disc has stopped playing. TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs _dvp5160_12_eng2.indd :07:10 PM