From Lifecycle Modelling to Lifecycle Analysis A Framework for Interactive Visualisation of Lifecycle Information

Energy and Thermal Management Simulation of an Advanced Powertrain

Energy and Thermal Management Simulation of an Advanced Powertrain Armin Traußnig VIRTUAL VEHICLE Research Center 04.10.2013 COMET K2 Competence Center - Initiated by the Federal Ministry of Transport,

Break out session Materials / Integration

Autosim 6th Technology workshop Break out session Materials / Integration Günther Fabian The Virtual Vehicle Competence Center 30. April 2008 K plus K Kompetenzzentrenprogramm, plus eine Förderinitiative

Mastering increasing product complexity with Collaborative Systems Engineering and PLM

Mastering increasing product complexity with Collaborative Systems Engineering and PLM Thierry Ambroisine Dassault Systèmes 10 rue Marcel Dassault, 78140 Vélizy Villacoublay, France thierry.ambroisine@3ds.com

With an Eye for Details For the Commercial Vehicles of Tomorrow

With an Eye for Details For the Commercial Vehicles of Tomorrow Heavy-Duty Engineering Since the founding of our company 35 years ago, we have dedicated ourselves to a goal: Supporting the development

from mind to motion Automotive Your partner for mechatronics

from mind to motion Automotive Your partner for mechatronics From mind to motion Your partner for mechatronics Sonceboz s core competencies consist of design, development and production of mechatronic

Fraunhofer Project Group

Fraunhofer Project group for new Drive Systems NAS Fraunhofer Project Group for New Drive Systems NAS Hybrid powertrains / electromobility Design Conventional powertrains Project group NAS Stationary powertrains

So#ware Engineering & Systems Engineering

1 So#ware Engineering & Systems Engineering Martin Griss Director, Silicon Valley Campus martingriss@svcmuedu 2 Carnegie Mellon Silicon Valley Established 2002 Heart of high tech ecosystem Education Research

Improving Interoperability in Mechatronic Product Developement. Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic

International Conference on Product Lifecycle Management 1 Improving Interoperability in Mechatronic Product Developement Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic PROSTEP AG Dolivostr.

Electrics & Electronics

Area of competence Electrics & Electronics Maximum Focus ARRK P+Z Engineering For nearly 50 years, we have providing active product development support to customers from the automotive, aerospace and special

Content. Page 04. SIMPACK Automotive. Suspension Design. Virtual Component Test Rigs. Handling and Driving Dynamics. Powertrain and Driveline

SIMPACK Automotive Content Page 04 SIMPACK Automotive 06 Suspension Design 07 Virtual Component Test Rigs 08 Handling and Driving Dynamics 10 Powertrain and Driveline 12 Ride, Noise/Vibration/Harshness

The Road to Electrical Vehicle and Hybrid Evolution in Turkey

The Road to Electrical Vehicle and Hybrid Evolution in Turkey Prof. Dr. R. Nejat TUNCAY OKAN University & MEKATRO R&D Company Istanbul, Turkey November 18, 2015 Why What Happened between 1890 and 1920?

Challenges of Requirements Modelling in the Product Development Process

Challenges of Requirements Modelling in the Product Development Process - Integrated Requirements Modelling DI Michael Maletz michael.maletz@virtuellesfahrzeug.at ProSTEP ivip Symposium 2006 Köln, April

Systems-driven Product Development. Overview

Systems-driven Product Development Overview Key PLM Requirements to Deliver Systems-Driven Product Development Key PLM Requirements to Deliver Systems-Driven Product Development What Part(s) # to order

Vorarlberg University of Applied Sciences - Dornbirn, Austria

The Magellan Exchange GRADUATE/MASTER Course Offerings in English List is as up-to-date as possible as of 30 November 2015 (Variation may occur; please use this as a general guide only. Credits and course

Experts in Computational Fluid Dynamics

Experts in Computational Fluid Dynamics TotalSim Background TotalSim is an independent CFD consultancy firm specialising in aerodynamic and hydrodynamic design and development through the use of open source

Model Based Systems Engineering tools and methods for hydraulic systems design. WIEFP ABIMAQ [Setembro de 2014]

Model Based Systems Engineering tools and methods for hydraulic systems design WIEFP ABIMAQ [Setembro de 2014] Smarter decisions, better products. LMS, +30 years of Engineering Innovation Leading partner

Product Performance Information Management NSRP Conference, May 14-16, San Diego, CA

Product Performance Information Management NSRP Conference, May 14-16, San Diego, CA Alhad Joshi Director, Enterprise Solutions 2 Agenda 1. Introduction 2. Domain & Positioning 3. Challenges for Stake-holders

Masters of Engineering Degree

Annex 2 Masters of Engineering Degree The curriculum in the Master of Engineering Program is structured to provide a foundation of advanced engineering topics while allowing students flexibility to meet

SysML Modelling Language explained

Date: 7 th October 2010 Author: Guillaume FINANCE, Objet Direct Analyst & Consultant UML, the standard modelling language used in the field of software engineering, has been tailored to define a modelling

Cityzenith s 5D Smart City platform empowers users with a simple way to make sense of the torrent of data in our cities, corporate

5D Smart City Cityzenith s 5D Smart City platform empowers users with a simple way to make sense of the torrent of data in our cities, corporate campuses, and universities, revolutionizing the way we access,

The SPES Methodology Modeling- and Analysis Techniques

The SPES Methodology Modeling- and Analysis Techniques Dr. Wolfgang Böhm Technische Universität München boehmw@in.tum.de Agenda SPES_XT Project Overview Some Basic Notions The SPES Methodology SPES_XT

Graduate School of Science and Technology

Contents Master's Course 2 Three Common Courses 2 Materials and Life Science Course 2 Computer and Information Science Course 3 Electrical and Mechanical Engineering Course 3 Doctor's Course 5 Materials

What is Enterprise Architect? Enterprise Architect is a visual platform for designing and constructing software systems, for business process

1 2 3 What is Enterprise Architect? Enterprise Architect is a visual platform for designing and constructing software systems, for business process modeling, and for more generalized modeling purposes.

Dal software all automazione attraverso uno sviluppo integrato multidisciplinare Decisioni Intelligenti, Macchine dedicate, Prodotti Migliori

Elio Bergamaschi, Business Development Manager Dal software all automazione attraverso uno sviluppo integrato multidisciplinare Decisioni Intelligenti, Macchine dedicate, Prodotti Migliori Smarter decisions,

Specialized Training Calendar May August 2015. Training for Professionals by Professionals

Specialized Training Calendar May August 2015 Training for Professionals by Professionals Course Titles Days Fees Training Dates NETWORKING / OPERATING SYSTEMS / SERVERS Cisco Certified Network Administrator

Ryan F. Schkoda, Ph.D. Postdoctoral Fellow Wind Turbine Drivetrain Testing Facility Charleston, SC

Systems Engineering Activities at Clemson University s International Center for Automotive Research (CU-ICAR) and Wind Turbine Drivetrain Testing Facility Ryan F. Schkoda, Ph.D. Postdoctoral Fellow Wind

Model-Based Quality Assurance of The SMB2 Protocol Documentation

Model-Based Quality Assurance of The SMB2 Protocol Documentation Wolfgang Grieskamp Architect, Protocol Engineering Team, Microsoft Corporation Microsoft Part of the company s interoperability initiative

BEDIFFERENT A C E 2 0 1 2 I N T E R N A T I O N A L

BEDIFFERENT A C E 2 0 1 2 I N T E R N A T I O N A L ACE 2012 I N TERNATIONAL Application Lifecycle Management Workshop Peter Schroer Aras Corp COFES 2012 Marc Halpern (Gartner) Copyright 2012 Aras. All

Solutions. magazine. Automotive

www.v2c2.at magazine No. 21 2015 Automotive Solutions H. List M. Ayoubi N. Atalla T. Lösche-ter Horst Embedded Systems & Sensor Networks Alternative Powertrains Integral Safety HVAC, Comfort & NVH Testing

Model-Driven Software Development for Robotics: an overview

Model-Driven Software Development for Robotics: an overview IEEE-ICRA2011 Workshop on Software Development and Integration in Robotics Jan F. Broenink, Maarten M. Bezemer Control Engineering, University

Acoustical Surfaces, Inc.

Efficient and Faster PLC Software Development Process for Automotive industry. Demetrio Cortese IVECO Embedded Software Design

Efficient and Faster PLC Software Development Process for Automotive industry Demetrio Cortese IVECO Embedded Software Design 13-06-2013 Automotive OEM Mandatory Requirement Delivery the new vehicle in

Anwendung von Polyspace im Software Entwicklungsprozess nach IEC 60880. München, 19.05.2011, Dr.-Ing. Jörg Barrho

Anwendung von Polyspace im Software Entwicklungsprozess nach IEC 60880 München, 19.05.2011, Dr.-Ing. Jörg Barrho Agenda 01 Tognum and MTU Friedrichshafen 02 Background and project 03 Overview IEC 60880

Towards an effective interoperability of models within the System Engineering applied to aeronautics

CONFERENZA INCOSE ITALIA SU SYSTEMS ENGINEERING CIISE 2014 Roma, 24 25 Novembre 2014 Towards an effective interoperability of models within the System Engineering applied to aeronautics Eugenio Brusa,

magazine EMBEDDED SYSTEMS COUPLED SIMULATION Main topic: Vehicle Electronics Current challenges in research and development ENERGY STORAGE

magazine No. 11, I-2012 CONTROL SYSTEMS ELECTRIFIED POWERTRAIN ENERGY STORAGE EMBEDDED SYSTEMS COUPLED SIMULATION Main topic: Vehicle Electronics Current challenges in research and development Power Net

Vehicle NVH Development. www.novomec.com info@novomec.com Tel: +90 216 7061324 Fax: +90 216 7061284

Vehicle NVH Development 1 Contributions on Different Product Development Phases NVH Development Phases Novomec Engineering provides consultancy and hands on project services throughout the complete vehicle

White Paper. Enterprise Enabler and SharePoint 2010 Or Why SharePoint Needs Enterprise Enabler. Pamela Szabó Stone Bond Technologies

White Paper Enterprise Enabler and SharePoint 2010 Or Why SharePoint Needs Enterprise Enabler Pamela Szabó Stone Bond Technologies Copyright 2014 Stone Bond Technologies, L.P. All rights reserved. The

Safe-E. Safe-E Introduction. Coordination: Andreas ECKEL TTTech Computertechnik AG andreas.eckel@tttech.com

Introduction Coordination: Andreas ECKEL TTTech Computertechnik AG andreas.eckel@tttech.com The Eurostars Project within the ITEA-2 Safe Project Eurostars : what is it and why?: Eurostars is an Eureka

Physical Modeling with SimScape

Physical Modeling with SimScape Saving energy with Physical Modeling Adriaan van den Brand Mday 29-4-2011 V1.4 A. Van den Brand, Mday 29-4-2011 1 Bio Adriaan van den Brand System architect Sogeti High

Document Management Server - Overview

Introduction The Document Management System (DMS) is a web-based application designed to allow for storage and retrieval of documents with user-defined document types, document groups, and keywords. The

Electronics & Electrification

Passion. Innovation. Solutions. Electronics & Electrification APPLICATIONS FOR INTELLIGENT SYSTEMS www.fev.com CONTENTS COMPANY PROFILE 4 SOFTWARE DEVELOPMENT AND FEV EMBEDDED SYSTEMS TESTCENTER (FEST)

MASTER OF ENGINEERING Mechanical Engineering Program

MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.

On MSC Adams Vehicle Modeling and its Applications to Dynamics Performance Evaluation

On MSC Adams Vehicle Modeling and its Applications to Dynamics Performance Evaluation K. Uehara NISSAN Motor CO., LTD Digital Development for Vehicle Dynamics Performance 1 Provide Suspension MSC Adams

Department of Mechanical Engineering

About The Department The at BITS-Pilani is one of the premier departments in the institute that provides a unique educational and research environment. Its various Bachelor s, Master s and Doctoral Programs

ICT 9: Tools and Methods for Software Development

ICT 9: Tools and Methods for Software Development Jorge GASOS DG CONNECT Jorge.Gasos@ec.europa.eu R&D and Software Industry* Total R&D investments Total R&D headcount * Source: Truffle100 http://www.truffle100.com

LMS Imagine.Lab AMESim Powertrain Transmission

LMS Imagine.Lab AMESim Powertrain Transmission LMS Imagine.Lab Powertrain Transmission LMS Imagine.Lab Powertrain Transmission provides a generic platform for analyzing and designing optimal transmission

Computational Fluid Dynamics in Automotive Applications

Computational Fluid Dynamics in Automotive Applications Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 1/15 Outline Objective Review the adoption of Computational

Introduction to the Siemens PLM End to End Solution for Composites

Introduction to the Siemens PLM End to End Solution for Composites Restricted Siemens AG 2014 2013 All rights reserved. Page 1 Siemens PLM is Dedicated to the Future of Lightweight Engineering Bringing

ANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE. Critical Systems & Software Development Solutions

ANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE Critical Systems & Software Development Solutions Embedded Systems and Software Challenges in Automotive Production-Proven International and

Executive Master Program Green Mobility Engineering. Technology + Management

Executive Master Program Green Mobility Engineering Technology + Management KIT University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz Association Accredited by Keyfacts

MECHANICAL ENGINEERING

MECHANICAL ENGINEERING Prof.dr.ir. André de Boer Program director Mechanical Engineering Dr. Genie Stoffels Program coordinator Mechanical Engineering 19/11/2015 1 CONTENT MASTER MECHANICAL ENGINEERING

Heat Transfer and Thermal-Stress Analysis with Abaqus

Heat Transfer and Thermal-Stress Analysis with Abaqus 2016 About this Course Course objectives Upon completion of this course you will be able to: Perform steady-state and transient heat transfer simulations

Aeroacoustic Analogy for the Computation of Aeroacoustic Fields in Partially Closed Domains

INSTITUT FÜR MECHANIK UND MECHATRONIK Messtechnik und Aktorik Aeroacoustic Analogy for the Computation of Aeroacoustic Fields in Partially Closed Domains A. Hüppe 1, M. Kaltenbacher 1, A. Reppenhagen 2,

A new approach to automotive electric/electronic engineering life-cycle management

IBM Software Automotive A new approach to automotive electric/electronic engineering life-cycle management Managing engineering data and processes using a single source of truth 2 A new approach to automotive

Efficient Dynamics. Future Growth Customers Profitability. Winning new customers by asking new questions.

Efficient Dynamics Future Growth Customers Profitability Winning new customers by asking new questions. More driving pleasure, lower emissions: No other automobile manufacturer in the world today implements

How To Make A Lightweight Car

Lightweight solutions Multi-material constructions Flanders DRIVE Index: Flanders DRIVE 1 Need for cost-efficient lightweight solutions 2 Multi-material constructions as a valuable solution 3 Our expertise

Clean and energy-efficient vehicles Advanced research and testing Battery systems

Clean and energy-efficient vehicles Advanced research and testing Battery systems Flanders DRIVE Index: Flanders DRIVE 1 Optimising power / energy ratio of energy storage systems 4 Battery ageing research

Net Developer Role Description Responsibilities Qualifications

Net Developer We are seeking a skilled ASP.NET/VB.NET developer with a background in building scalable, predictable, high-quality and high-performance web applications on the Microsoft technology stack.

LMS Test.Lab Introduction

LMS Test.Lab Introduction LMS Test.Lab The integrated solution for noise and vibration testing LMS Test.Lab is a complete, integrated solution for test-based engineering, combining high-speed multi-channel

INTEGRATED OPEN DEVELOPMENT PLATTFORM FÜR TEIL- UND VOLLAUTOMATISIERTE FAHRZEUGANTRIEBE

INTEGRATED OPEN DEVELOPMENT PLATTFORM FÜR TEIL- UND VOLLAUTOMATISIERTE FAHRZEUGANTRIEBE PETER PRENNINGER A3PS MV - Peter Prenninger 2014-12-11 1 SUSTAINABILITY REQUIRES AN EFFICIENT MOBILITY SYSTEM Infrastructure

DIPLODOCUS: An Environment for. the Hardware/Software Partitioning of. Institut Mines-Telecom. Complex Embedded Systems

DIPLODOCUS: An Environment for Institut Mines-Telecom the Hardware/Software Partitioning of Complex Embedded Systems Ludovic Apvrille, ludovic.apvrille@telecom-paristech.fr ETR 2013, Toulouse, France Goals

Product Verification & Validation Management

Product Verification & Validation Management Strategic Measurement- and Simulation Data Management in today's Engineering IT Infrastructures Hans-Joachim Bothe, Dr. Ralf Nörenberg 19.08.2012 HighQSoft

G-Cloud Framework. Service Definition. Oracle Fusion Middleware Design and Implementation

Fusion Middleware G-Cloud Framework Service Definition Oracle Fusion Middleware Design and Implementation Prepared for: G-Cloud Document: Fusion Middleware Version: 0.1 Issue Date: 06/09/2013 1 OVERVIEW

The Education of Sustainable Architecture (Proposed for Master Degree)

The Education of Sustainable Architecture (Proposed for Master Degree) M.H. FALLAH Faculty of Art's and Architecture, Shiraz University, Iran fallah@shirazu.ac.ir ABSTRACT Buildings have diverse effects

Physical to Functional Mapping with Mindmap Software

2006-01-3493 Physical to Functional Mapping with Mindmap Software Copyright 2006 SAE International Michael R Sevcovic International Truck and Engine Corporation ABSTRACT This paper describes how mind mapping

Elektrofahrzeug mit Range Extender die Entwicklungsherausforderung Electric Vehicle with Range Extender. The developement challenge

Elektrofahrzeug mit Range Extender die Entwicklungsherausforderung Electric Vehicle with Range Extender Dr. M. Korman AVL-List GmbH The developement challenge Stärkung regionaler Kooperationen in der Elektromobilität

Web Service Platform for Engineering Design Optimization of a Mechatronic Multi-parts Component

Web Service Platform for Engineering Design Optimization of a Mechatronic Multi-parts Component R. Ben Mosbah 1, S. Dourlens 1, A. Ramdane-Cherif 1, N. Levy 2, F. Losavio 3 1 LISV, Université de Versailles,

WORK PROGRAMME 2014 2015 Topic ICT 9: Tools and Methods for Software Development

WORK PROGRAMME 2014 2015 Topic ICT 9: Tools and Methods for Software Development Dr. Odysseas I. PYROVOLAKIS European Commission DG CONNECT Software & Services, Cloud odysseas.pyrovolakis@ec.europa.eu

Understanding and Evaluating the BI Platform by Cindi Howson

Understanding and Evaluating the BI Platform by Cindi Howson All rights reserved. Reproduction in whole or part prohibited except by written permission. Product and company names mentioned herein may be

Cross Platform Software Release Capabilities

Cross Platform Software Release Capabilities Larry Aube ClearPath Portfolio Management ClearPath Briefings 2015 Grove/UK Agenda Data Exchange ClearPath Integration Services ClearPath IDEs 2015 Unisys Corporation.

SOA and VO-s. Steve Stein Mari-Klara Oja. International School of New Media Models of Virtual Organizations Dr. Oliver Bohl

SOA and VO-s Steve Stein Mari-Klara Oja International School of New Media Models of Virtual Organizations Dr. Oliver Bohl Overview / Context of SOA VO/VE (idea) from static mainframes to dynamic arrangements

Centre for Automotive Technology (CAT) School of Applied Science. Sustainable Automotive Solutions www.cranfield.ac.

Centre for Automotive Technology (CAT) School of Applied Science Sustainable Automotive Solutions www.cranfield.ac.uk/sas/automotive Professor Kambiz Kayvantash k.kayvantash@crannfield.ac.uk A global approach

European Seminar on Technologies from Space Exploration Interests and expectations of NEREUS districts and local clusters LOMBARDIA AEROSPACE CLUSTER SECTOR PROFILE Snapshot of Lombardia Aerospace Cluster

Mastering the flood of NVH data through ASAM-ODS and MDM

NVH data management Mastering the flood of NVH data through ASAM-ODS and MDM Dr. Dietmar Rapf science + computing ag IT Service and Software Solutions for Complex Computing Environments Tuebingen Muenchen

Model Based E/E Architecture Development at Daimler

Model Based E/E Architecture Development at Daimler...and a Look at the Broader Picture Markus Hemprich Gabriel Schwefer E/E Architecture & Standardisation (RD/EEP) Vector Congress Stuttgart, 28.11.2012

Integrated tools for collaborative software development

Why tool integration is necessary Integrated tools for collaborative software development Contact: juho.eskeli@vtt.fi Size and complexity in embedded systems software is growing quickly Collaboration is

OVERVIEW OF THE INDUSTRY STANDARDS

OVERVIEW OF THE INDUSTRY STANDARDS Table of Contents Background... 3 What is it we do Around Standard... 3 Why we do it... 3 How is it we do it... 4 Which areas do we develop Industry Standards... 4 1.

CASE STUDY. JNIOSH (National Institute of Occupational Safety & Health, Japan) Reproduction of Multi-modal Sensation.

CASE STUDY JNIOSH (National Institute of Occupational Safety & Health, Japan) Reproduction of Multi-modal Sensation Japan Automotive NVH Simulator Traditionally, a single- or multi-degree-of-freedom (DOF)

Practical application of thermoplastic composites for body-in-white application development: A collaborative approach between DuPont and Renault

Practical application of thermoplastic composites for body-in-white application development: A collaborative approach between DuPont and Renault Gérard Liraut, Expert Leader Polymères, Charactérisation

KSP Programme Conference

KSP Programme Conference ModComp Model Based Techniques and Competence Integration within the Development of Complex Mechatronics Product -- A joint project between KTH, VCC, and SCANIA Agenda Motivation

NVH TECHNOLOGY IN THE BMW 1 SERIES

NVH TECHNOLOGY IN THE BMW 1 SERIES (Presented by) A. Fleszar LMS Americas J. Florentin, F. Durieux LMS International T. Yamamoto, Y. Kuriyama Nippon Steel Corporation CONTENTS Introduction Hybrid Interior

Bentley Systems Launches AssetWise Initiative for Operating and Sustaining Infrastructure Assets

ARC VIEW MARCH 19, 2010 Bentley Systems Launches AssetWise Initiative for Operating and Sustaining Infrastructure Assets By Tom Fiske and Russ Novak Summary As more and more owner-operators shift their

Development of AUTOSAR Software Components within Model-Based Design

2008-01-0383 Development of AUTOSAR Software Components within Model-Based Design Copyright 2008 The MathWorks, Inc. Guido Sandmann Automotive Marketing Manager, EMEA The MathWorks Richard Thompson Senior

PARTICLES 2013. Fully Coupled Multiphase Simulation of a Bottom-spray Wurster-Coater using a hybrid CPU/GPU CFD/DEM Approach

PARTICLES 2013 Fully Ced Multiphase Simulation of a Bottom-spray Wurster-Coater usg a hybrid CPU/GPU CFD/DEM Approach D. Jajcevic, A.C. Radeke, E. Siegmann, G. Neubauer, J.G. Khast K1 Competence Center

Crucial Role of ICT for the Reinvention of the Car

Joint EC / EPoSS / ERTRAC Expert Workshop 2011 Electric Vehicle System Integration and Architecture Crucial Role of ICT for the Reinvention of the Car Karl-Josef Kuhn Siemens Corporate Research and Technologies

Complete course list. Taught

Complete course list Taught Course name Available awards Mode Advanced Materials MSc/PgDip/PgCert Full-time/Part-time Advanced Mechanical Engineering MSc Full-time/Part-time Advanced Motorsport Engineering

Workflow Overview And Approach. Steve Hughes Changqing Zhen Natasha Globus

Workflow Overview And Approach Steve Hughes Changqing Zhen Natasha Globus Agenda What Is Workflow? Why Implement Workflow System? Workflow Architecture Technical Requirements for Workflow System Approach

ACOUSTICS FOR THE BUILT ENVIRONMENT

ACOUSTICS FOR THE BUILT ENVIRONMENT Sound is an element too often forgotten when designers and owners visualize a building, but acoustics are just as important as what we can see and feel. Randy Waldeck,

Financial Services Associate in Applied Science Degree (A.A.S.)

Berkeley College Overview Academic Programs Admissions and Finances Administration, Faculty, and Staff Contact Us Get a PDF of this page. Financial Services Associate in Applied Science Degree (A.A.S.)

Minergie and Minergie-P, the Swiss Energy Labels Armin Binz, Institute of Energy in Building

Minergie and MinergieP, the Swiss Energy Labels Armin Binz, Institute of Energy in Building Energy and Sustainability from Concepts to Labels Concepts Methods and Instruments Standards and Labels SIA 8/,

Automotive System and Software Architecture

Automotive System and Software Architecture Yanja Dajsuren 2IW80 Software specification and architecture March 25, 2014 Which one has more software? Chevrolet Volt, an example modern day car Boeing 787,

A Survey Report by Horst Hientz Hans-Jürgen Kugler

A Survey Report by Horst Hientz Hans-Jürgen Kugler Bonifaz Maag Dominik Strube 1 Content Survey framework Results Trends & Drivers Impact on business models Impact on automotive industry Impact on automotive

Consulting, Engineering & Managed Service Provider

Consulting, Engineering & Managed Service Provider A Joint Venture Company Together Making a difference Introduction Genesis of AeroEuro: A Joint Venture between Punj Lloyd Group, India and GECI, France

Organisaties groot en klein, beginnen zich meer en meer te realiseren dat inzicht in (real-time) data helpt

Data Virtualization, power to innovate with Agile data Drs. Patrick Berkhout, Enterprise en Software Architect, Trivento Organisaties groot en klein, beginnen zich meer en meer te realiseren dat inzicht

Challenges of Analytics

Challenges of Analytics Setting-up a Data Science Team BA4ALL Eindhoven November 2015 Laurent FAYET CEO @lbfayet www.artycs.eu 1 Agenda 1 About ARTYCS 2 Definitions 3 Data Value Creation 4 An Approach

PLM Center of Excellence PLM for Embedded Product Development - Challenges, Experiences and Solution. M a y 2 0 0 9

PLM Center of Excellence PLM for Embedded Product Development - Challenges, Experiences and Solution M a y 2 0 0 9 Table of Contents Abstract 3 Introduction 4 Embedded product development life cycle 4

Journals Price List. Inderscience Enterprises Limited www.inderscience.com

Journals Price List 2016 Latest research findings for Academia, Industry and Government. International coverage, linking Centres of Excellence worldwide. All titles fully refereed. Flexible subscription

Model-driven development solutions To support your business objectives. IBM Rational Rhapsody edition comparison matrix

Model-driven development solutions To support your business objectives IBM Rhapsody edition comparison matrix IBM Rhapsody 7.5 edition: capabilities and comparisons The enclosed table compares the capabilities