Adobe LiveCycle Production Print ES2

Transcription

1 Adobe LiveCycle Production Print ES2 Version 9.0 Installation Guide Rev A

2 Adobe LiveCycle Production Print ES2 Installation Guide Rev A STREAMSERVE, INC. ALL RIGHTS RESERVED United States patent #7,127,520 Portions copyright Adobe Systems Incorporated. All rights reserved. Adobe, the Adobe logo, LiveCycle and PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of StreamServe, Inc. Information in this document is subject to change without notice. StreamServe Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. All registered names, product names and trademarks of other companies mentioned in this documentation are used for identification purposes only and are acknowledged as property of the respective company. Companies, names and data used in examples in this document are fictitious unless otherwise noted. StreamServe, Inc. offers no guarantees and assumes no responsibility or liability of any type with respect to third party products and services, including any liability resulting from incompatibility between the third party products and services and the products and services offered by StreamServe, Inc. By using StreamServe and the third party products mentioned in this document, you agree that you will not hold StreamServe, Inc. responsible or liable with respect to the third party products and services or seek to do so. The trademarks, logos, and service marks in this document are the property of StreamServe, Inc. or other third parties. You are not permitted to use the marks without the prior written consent of StreamServe, Inc. or the third party that owns the marks. Use of the StreamServe product with third party products not mentioned in this document is entirely at your own risk, also as regards the StreamServe products. StreamServe Web Site

3 Adobe LiveCycle Production Print ES2 The license to this product was purchased from Adobe Systems Incorporated or a third-party authorized by Adobe. It is a licensed product containing StreamServe Inc. technology Use of this Software is controlled by the Adobe Systems Incorporated End User License Agreement (EULA). All Maintenance and Support service is provided by Adobe Systems Incorporated or a third-party authorized by Adobe. The terms and conditions governing your use of the software are described in the EULA accompanying the product provided by Adobe Systems Incorporated. For licensing issues contact Adobe Systems Incorporated. The installation media and documentation set contain and reference components that may not be enabled for use by or with your Adobe LiveCycle Production Print ES2 License. Contact information for Adobe Systems Incorporated For patch updates, technical notes, and additional information about this product see this page or contact your Adobe Enterprise Support provider. For other general questions see Developer information At the Adobe LiveCycle Developer Center website, you can get the latest developer information and extend your knowledge with articles, tutorials, code samples, downloads, and sample applications. For information about developer resources that are available, see Adobe, the Adobe logo, and LiveCycle are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other trademarks are the property of their respective owners Adobe Systems Incorporated. All rights reserved.

4

5 5 Contents Installing LiveCycle Production Print ES2...7 Components... 7 Supported LiveCycle ES2 software... 7 Supported software, platforms and databases... 8 Installation media Installing on Windows...11 Master setup To install a design environment To install a production environment To install the Document Service Component (DSC) To install the Sample Project To Install StreamServe Help Installing on UNIX...14 Upgrading to LiveCycle Production Print ES Upgrading the document service component (DSC) Verifying the installation...17

6 6

7 7 Installing LiveCycle Production Print ES2 For information about installing, modifying or uninstalling the StreamServe standard system and system requirements, see the StreamServe Persuasion SP4, Installation Guide. Components Product names and versions: LiveCycle Production Print ES2 The StreamServe Adobe integrated solution. StreamServe Persuasion SP4 The StreamServe release that the integrated solution is based on. StreamServe Persuasion includes the StreamServe Component Framework, Design Center and StreamServer. Adobe LiveCycle Designer ES2 The Adobe forms design product that is embedded in the integrated solution s design environment. Process Tool for Adobe LiveCycle Designer ES2 The application, developed by StreamServe, that integrates the Adobe LiveCycle Designer ES2 application in StreamServe Design Center. XFA Processor The application, developed by StreamServe, that enables the StreamServer runtime environment to generate output in various formats from XML data files and LiveCycle Designer ES2 form templates. Supported LiveCycle ES2 software This software supports: LiveCycle Designer ES2 or later LiveCycle ES2 or later Service packs are available from Adobe Enterprise Support.

8 8 Installing LiveCycle Production Print ES2 Supported software, platforms and databases LiveCycle Production Print ES2 supports a different set of platforms compared to other LiveCycle ES2 products. Note: StreamServe supports 64-bit platforms in 32-bit mode only. StreamServer (including the XFA processor) The following platforms are supported: Windows 2003 Server, 32/64 bit, Standard & Enterprise Edition, SP2 and above and R2 SP2 and higher (on x86-32/64 hardware and VMware ESX) Windows 2008 Server SP2, 32/64 bit (on x86-32/64 hardware and VMware ESX) Solaris 10 (on Ultra Sparc III hardware) AIX 5.3 and 6.1 (on pseries hardware) Red Hat AS/ES 4.0, 32 bit & EL Server and AP 5.0, 32/64 bit, (on x86-32/ 64 hardware) SUSE Linux Enterprise 10, 32/64 bit, (on x86-32/64 hardware) Adobe recommends a minimum of 4GB RAM for LiveCycle ES2. The minimum recommendation for LiveCycle Production Print ES2 is 2GB RAM. Deviations from LiveCycle ES2 HP-UX 11i v2 on Itanium hardware is supported and can be delivered on request. Limitations are: post-processing and SAP Delivery Manager are not supported. Design Center (including LiveCycle Designer integration) The following platforms are supported: Windows XP Pro SP2 and later, 32bit Windows 7 Professional, Enterprise, Ultimate. Adobe will support Windows 7 from LiveCycle ES2 SP1 Windows 2003 Server (SP2/R2 and later) 32 and 64 bit Windows 2008 Server 32 and 64 bit Deviations from LiveCycle ES2 Not supported: Windows Vista Supported by LiveCycle Production Print ES2, but not LiveCycle ES2 (will be supported from LiveCycle ES2 SP1) Windows 7 is supported Databases The following databases are supported:

9 Installing LiveCycle Production Print ES2 9 Microsoft SQL Server 2005 SP2 / 2008 Oracle 10g / 11g IBM DB2 v9.5 Deviations from LiveCycle ES2 Not supported: IBM DB2 v9.1 MySQL Note: IBM DB2 usage is limited to queue usage. You cannot use IBM DB2 with StreamStudio applications. Application Servers (StreamStudio) The following application servers are supported: Web sphere 6.1 /7.0 Apache Tomcat 5.5 Deviations from LiveCycle ES2 Not supported: JBoss Web Logic Supported by LiveCycle Production Print ES2, but not LiveCycle ES2: Apache Tomcat Directory servers Microsoft Active Directory 2003, 2008 OpenDS Deviations from LiveCycle ES2 Not supported: Sun One IBM Tivoli Directory Server Novell edirectory Supported by LiveCycle Production Print ES2, but not LiveCycle ES2: OpenDS JVMs The following JVMs are supported: Sun Java 6 update 12 or higher.(32bit only)

10 10 Installing LiveCycle Production Print ES2 Deviations from LiveCycle ES2 Not supported: IBM Java 6 JRockit Java 6 64 bit JVM Installation media LiveCycle Production Print ES2 software is available as DVD and as electronic downloadable media. The LiveCycle Production Print ES2 installation media contains: Master setup Module setups for Windows installations Module setups for UNIX installations User documentation Document Service Component for LiveCycle Workbench Sample Project The final packaging of the product constitutes a media set including two DVDs or images: LiveCycle Designer ES2 LiveCycle Production Print ES2

11 Installing on Windows 11 Installing LiveCycle Production Print ES2 Installing on Windows You install the software for Windows from the installation media. Double-click the mssetup.exe file to open the master setup. It is not possible to install LiveCycle Production Print ES2 in parallel with LiveCycle Production Print ES Update1 or with any previous version. Master setup The installation consists of a master setup and a number of module setups. Figure 1 Master setup, with links to module setups. Clicking a link in the master setup launches the setup wizard for the selected module. Before You Install Displays information that is important to know before you start the installation. Installation Guide Opens the LiveCycle Production Print ES2 Installation Guide (PDF, this document). Read License Agreement Opens the End User License Agreement (EULA) document. StreamServe Enterprise Repository Installs StreamServe Enterprise Repository. This must be installed before you install any other StreamServe components

12 12 Installing on Windows Installing LiveCycle Production Print ES2 Framework and Control Center Installs the underlying software required to run StreamServe applications. StreamServe Enterprise Repository must be installed on one computer in your company or organization before you install the Framework and Control Center. StreamServer Installs software needed to run StreamServer applications. You must install the Framework and Control Center before you install StreamServer. Design Center Installs Design Center. StreamStudio Installs the StreamStudio web applications including Composition Center, Collector, Dispatcher and Reporter. SAP Integration Module setup for the components used for StreamServe SAP integration. Register in SAP System Landscape Directory Registers the StreamServe product in the System Landscape Directory at the customer site. This is required if you want to use the SAP Solution Manager. Browse Opens a file browser to view the files on the media. Exit Exits the setup. To install a design environment 1 Install Adobe LiveCycle Designer ES2. This is optional: you can run the Process Tool without the Adobe LiveCycle Designer ES2 installed (if using existing form templates). 2 Design Center To install a production environment 1 StreamServe Enterprise Repository 2 FrameWork and Control Center 3 StreamServer

13 Installing on Windows 13 Installing LiveCycle Production Print ES2 To install the Document Service Component (DSC) LiveCycle Production Print ES2 includes a Document Service Component (DSC). This component allows you to create a process in LiveCycle Workbench that can communicate with LiveCycle Production Print ES2. To install the DSC The DSC is provided on the installation media in the JAR file Extras/DSC/lcppdsc. 1 Open LiveCycle WorkBench and locate the Components view. 2 Right-click the Components folder and select Install component. 3 Navigate to the lcppdsc file, select the file and click OK. To install the Sample Project The Sample Project relies on a number of sample processes and resources that you can install in LiveCycle ES2 using LiveCycle Workbench. The processes and resources are provided on the installation media in the LiveCycle Archive file Extras\DSC\lcpp.lca. To install the LiveCycle Archive file, please refer to the Adobe LiveCycle ES2 documentation. Note: If your LiveCycle ES2 system was upgraded from a LiveCycle ES Update 1 system that had the DSC installed, see Upgrading to LiveCycle Production Print ES2 on page 15. To Install StreamServe Help Standard StreamServe Persuasion SP4 Help files are installed and run locally. Before you can use the StreamServe Help, you must install the help files manually. For LiveCycle Production Print ES2, the StreamServe help files are delivered on the installation media. To install StreamServe help from the installation media 1 Go to the installation media directory...\english\online help Note: For french or german, go to the corresponding directories:...\french\online help...\german\online help 2 Copy all files to the directory <StreamServe_installation>\Applications\StreamServer\5.4.0\Co mmon\htmlhelp

14 14 Installing on UNIX Installing LiveCycle Production Print ES2 Installing on UNIX To install on UNIX, run the setup script using the following command:./<path to installation directory>/setup_adobe For more information, see the StreamServe Persuasion SP4 Installation Guide.

15 15 Upgrading to LiveCycle Production Print ES2 This chapter describes how to upgrade to the LiveCycle Production Print ES2 software. To upgrade from LiveCycle Production Print previous releases to ES2, you install the ES2 software, as described in Installing LiveCycle Production Print ES2 on page 7, and then open your existing Projects. The Design Center environment will then automatically (after your confirmation) upgrade the Project. Note: You will not be able to open an upgraded Project in previous versions of the product. You have to manually change the resource type of previously imported XDP templates, from resource type Sample to XDP Template. If you try to use an XDP resource that has not been changed to XDP Template, the system will issue an error message. Prerequisite The LiveCycle Production Print ES2 software is installed. See Installing on Windows on page 11 or Installing on UNIX on page 14. To upgrade a Project to LiveCycle Production Print ES2 1 Open the Project. 2 If your XDP resources are not already of resource type XDP Template, you have to manually convert them to XDP Template. See the StreamServe Design Center documentation. 3 Open the Process and select the Open/Select Template command. Verify that the correct resource is assigned. 4 Save and re-export the Project. Upgrading the document service component (DSC) To upgrade to LiveCycle Production Print ES2 and Adobe LiveCycle to ES2, you have to upgrade your DSC deployed in the LiveCycle server. 1 Get new version of LiveCycle Production Print ES2 DSC, lcppdsc.jar, from the installation media directory /Extras. 2 Open LiveCycle Workbench and connect and to the upgraded LiveCycle server or LiveCycle ES2 instance. 3 Navigate to the Components view. Here you will find the ProductionPrint service.

16 16 Upgrading to LiveCycle Production Print ES2 4 If the ProductionPrint service is running, right click and select Stop. 5 Right click the service, and select Patch. 6 Browse to and select the new version of LiveCycle Production Print DSC. 7 Right click the service and select Start. Note: An alternative way to do this is to uninstall the previous version and then install the new version. Patching retains all service level configurations for the previous version. Uninstalling resets all configurations to the new versions default values.

17 17 Verifying the installation You can use the Sample Project, provided on the installation media, to verify that the installation and the Project upgrade went OK. See the LiveCycle Production Print ES2 User Guide, The Sample Project chapter.

18 18 Verifying the installation