Stationary installation Transportable installation. Other versions on request. Example. Pump type. Impeller type S, F,E.
|
|
|
- Bruce Douglas
- 7 years ago
- Views:
Transcription
1 Type series booklet A E/1 KSB KRT Submersible motor pumps 2 to 4 for wet well installation 60 Hz standard range Stationary installation Transportable installation Other versions on request 1. Aplications KRT submersible motor pumps are used for pumping all types of sewage and effluent in water treatment and industry, especially untreated sewage with long fibrous and solid substances, liquids containing air and gas as well as raw, activated and digested sludge. 2. Operating data Capacity Q up to 600 USgpm (140 m 3 /h) Head H up to 110 ft (33 m) Motor Power Temperature of pumped liquid 3. Drive P 2 up to 5 HP (3,6 Kw) t up to 140º F (60ºC) Three-phase asynchronous motor 200 V, 220 V, 230 V, 380 V, 440 V, 460 V, 575 V Single-phase asynchronous motor 115 V, 230 V (Motor 02UG only) 4. Material Standard version in cast iron. 5. Shaft sealing Mechanical seals being independent of the direction of rotation lubricated with non-toxic oil 6. Bearings Grease lubricated ball bearings 7. Designation Example Pump type Impeller type S, F,E Hydraulic dimension Motor size Number of polos Motor version U, X, W Material version / variant G (Complete pump in cast iron) KSB KRT F / 3 4 X G S Installation type S =Stationary wet-well installation without cooling jacket P= Transportable wet-well installation without cooling jacket
2 8. Pump hydraulics Since no one type of impeller is best suited for all applications, KSB has developed numerous impeller types, casing shapes, and pumps sizes so as to best meet any specific requirement. Closed, non-clogging 2 or 3 vane (K) impeller for highest efficiencies pumping all types of industrial and municipal wastewater. Raw sewage Activated & return sludge Industrial wastewater Process media Abrasive laden media Chemically aggressive media Stormwater KSB s extensive range of recessed, single vane and multivane impellers allows for the selection of an optimum impeller / casing / motor combination that best satisfies the full range of operation requirements of flow, head efficiency, solid size passage, wear resistance, and gas content. KSB offers the right impeller for cost effective and reliable operation. Pump Model: KRT K 40 TO to 30 Capacities to 39,000 GPM (8,860 m 3 /h) Heads to 350 Ft. (107 m) Free passage to 7. ½ in (190mm) KRT K 600 and 700 / 24 to 26 consult factory all sizes KRT K see type series booklet Closed, non-clogging single vane (E) impeller for fluids containing large solids and long fibrous material Raw sewage Digested sludge Return sludge Pump Model: KRT E 80 to to 8 Capacities to 4,300 GPM (980 m 3 /h) Heads to 120 Ft. (36 m) Free passage to 5. ½ in (120mm) KRT E E See type series booklet Recessed, non-clogging torque-flow (F) Impeller for fluids containing large solids, long fibrous admixtures, and entrained or dissolved gasses. Raw sewage Activated & return sludge Abrasive laden media Industrial wastewater Pump Model: KRT F 40 to to 6 Capacities to 2,600 GPM (590 m 3 /h) Heads to 260 Ft. (80 m) Free passage to 5.5½ in (135mm) KRT F 100, 150 > 5 hp (>4 kw) See type series booklet Cutting and grinding (S) impeller for high Pressure domestic sewage systems Containing long fibrous admixtures. Effluents Domestic sewage Pump Model: KRT S 40 1 ½ Capacities to 115 GPM (25 m 3 /h) Heads to 260 Ft. (80 m) Free passage to 9/32 in (7mm) KRT S See type series booklet
3 8. Material version G KRT < 5 hp (< 4 kw) KRT 80 With E-Impeller 4-pole (1750 rpm) Single-vane impellers 3 Discharge KRT 40, 65, 80, 100 With F-Impeller 2-pole (3500 rpm) 4-pole (1750 rpm) Vortex impellers 1 ½, 2 ½, 3 & 4 Discharge KRT 40 With S-Impeller 2-pole (3500 rpm) Grinder pumps 1 ½ Discharge For additional hydraulic selections and material combinations see type series booklet , 2 up to 30. Fig. 01 3
4 9.1 Standard program KRT < 5 hp (< kw) Size Material G S,F,E = Impeller types F, S F F, E F Cast iron Laminate graphite cast iron (ASTM A 48 Class 35B) This graphited cast iron is mostly used in the pumping of municipal sewage, sludges and rain-or surface water. Suitable for neutral, slighty aggressive media and media unlikely to cause excessive wear. The ph value of the pumped medium should be 5 to 13 Other sizes out of Standard program upon request S-F and E- impellers are only available in the diameters shown in the QH curves. K-impellers will be trimmed to meet the exact duty point. Material comparison ASTM material Acc. to DIN A 48 Class 35 B GG -2 5 A743 CA6NM A 276 Type A 276 Type A 276 Type 316 Ti A 576 Gr C 45 N Gav. Steel ST TZN NBR (nitrile rubber) NBR 4
5 9.2 Material combination standard program < 5 hp (< 4 Kw ) The main parts used in KSB submersible pumps are constructed in: -Cast iron ASTM A 48 Class 35 B (GG-25) Pump set Material variant G A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A 48 Class 35 B A743 CA6NM A 48 Class 35 B Steel A 48 Class 35 B NBR NBR NBR ) ) Not applied for motor 22, KRT NBR Carbon/Si - Carbide Si-Carbide/Si -Carbide Installation parts / /
6 9. General arrangement drawing Fig. 02 6
7 10.1 General arrangement drawing Fig. 03 7
8 10.2 General arrangement drawing Fig. 04 8
9 10.3 General arrangement drawing Alternative design F Fig. 05 Alternative design E with impeller wear ring / casing wear ring Fig. 06 Alternative design F 80/ Fig. 07 9
10 10.4 General arrangement drawing Detail leakage detection Fig
11 10.5 Installation plan mechanical seal Motors: Part No. Part description 421 Rotary shaft seal 433 Mechanical seal Mechanical seal Mechanical seal 550 Disc 932 Circlip Fig
12 10.6 Installation plan mechanical seal Motors: Part No. Part description 412 O-Ring Mechanical seal Mechanical seal 524 Shaft protecting sleeve 550 Disc 932 Circlip Fig Characteristic curves Hydraulic tests According to KSB Standard (Opt: Impeller S, E, F to Hydraulic Institute, level B). General accep. Test According to KSB Standard. 12
13 E rpm 3 inch Q (m3/h) KRT Q [ US. GPM ] Q (m3/h) Free passage 3 1 / 8 (80mm) Q [US. GPM] K-2553-B-005 MOTOR RATING Material G MAX.LIQUID TEMP. MOTOR CODE MOTOR RATING Material G MAX.LIQUID TEMP. MOTOR CODE Hp (kw) ºF (ºC) Hp (kw) ºF (ºC) 14 U2G 24 UG 104 (40) 104 (40) 14 X2G (FM, CSA) 24 XG (FM, CSA) 1.1 (0.8) 3.4 (2.5) 140 (60) 14 W2G 140 (60) 34 WG (FM, CSA) 1.75 (1.3) 104 (40) 2.4 (1.8) 104 (40) 140 (60) 24 WG 14 U2G 14 X2G (FM, CSA) 24 UG 24 XG (FM, CSA) 5.0 (3.7) 104 (40) 34 UG 34 XG (FM, CSA) (FM, CSA) = Explosionproof to Class I, Division 1, Groups C&D. 13
14 F rpm 1.1/2 inch KRT 14
15 KRT F rpm 2.1/2 inch 15
16 F rpm 3 inch KRT 16
17 F rpm 4 inch KRT 17
18 S (Single-Phase 1~) 3500 rpm 1.1/2 inch KRT 18
19 S rpm 1.1/2 inch KRT Free passage 9 / 32 (7mm) MOTOR RATING Material MAX.LIQUID TEMP. G Hp (kw) ºF (ºC) 1.5 (1.1) 104 (40) 2 2 XG 2.0 (1.5) 131 (55) 2 2 UG MOTOR CODE (FM, CSA) 3.0 (2.2) 104 (40) 2 2 XG 3.5 (2.6) 131 (55) 2 2 UG (FM, CSA) (FM, CSA) = Explosionproof to Class I, Division 1, Groups C&D; 19
20 11. Dimension table 12.1 KRT Stationary installation Discharge elbow flange DN 3 Portable installation Pump discharge flange DN 2 Fig
21 12.2 KRT Portable installation Stationary installation Pump discharge flange DN 2 Discharge elbow flange DN 3 Fig
22 12.3 KRT / Discharge elbow foundation (Dimension in inches) Pump size A B C D E G H J /16 7 7/8 8 11/ / /32 6 1/ /32 25/ /32 7 7/8 8 11/ / /32 6 1/2 5 17/32 25/32 Discharge elbow flange DN 3 (Dimensions in mm) Application Var DN 2 DN 3 g f k f D f z f l f Standard /16 7 3/32 7 3/ / / /8 4 13/16 * ANSI B # * Only with reference to flange hole 8 23/32 * ANSI B # / DIN EN type 21 form B PN /32 * ANSI B # / DIN EN type 21 form B PN16 Dimensions in inches PUMP Hydraulic KRT... U,X DN 1 DN 2 a 1 a 2 b 1 b 2 d e 2 f 1 f 2 g h 1 k 1 l m / /8 5/ F/E / /32 9/16 5/8 9/32 7/8 1/4 31/32 15/16 1/32 25/32 1/ /34 29/32 7/ / F /34 11/32 11/16 31/32 23/32 9/16 5/8 9/32 15/32 27/32 15/16 15/16 7/32 3/8 1/2 Dimensions in inches Hydraulic KRT... U,X FOUNDATION WEIGHT N O P R S T V (lbs) F/E / / /32 21/32 3/4 13/16 1/2 23/32 7/ / F / /34 21/32 21/32 3/4 13/16 1/2 23/32 7/ ) Lowest shut-off point for automatic operation Flange DN 2 A B g f k f l f z f 3 4 Dimensions in inches 5 7/16 6 7/32 7 7/32 8 9/32 5 7/16 6 7/32 6 5/16 7 3/32 11/ /
23 A E / KSB Bombas Hidráulicas SA Rua José Rabello Portella, 400 Várzea Paulista SP Brazil: Phone: (55) Fax: (55) KSB - Customer Care Service gqualidade@ksb.com.br Fax: (55)
Flygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
The Company. QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design,
The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45 years, PAPANTONATOS S.A. has focused on the customer s design, manufacturing and service needs in the field of submersible pumps. Our engineering
Series description: Wilo-Drain TC 40
Series description: Wilo-Drain TC 40 H[m] Wilo-Drain TC 40 10 8 6 4 2 TC 40/8 TC 40/10 0 0 2 4 6 8 10 12 14 Q[m³/h] Design Submersible sewage pump Application Pumping heavily contaminated fluids for House/site
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt
N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING Flygt The Concept N-Pump series. Bringing NEW levels of efficiency to wastewater handling applications Reduced pumping efficiency,
Dry Pit Solids Handling Pumps
Dry Pit Solids Handling Pumps A Time-Tested Leader Chicago Pump Dry Pit Solids Handling Pumps have an established reputation of efficiency, long life and reliable operation First in: Quality 3Reliability
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
Project: Model: Chk d: Date: Model 32DGUII61.5S
Contents Model 32DGUII6.5S 32DGFU6.5S 32DGFU6.5 50DGFU62.2S 50DGFU62.2 50DGFU63.7S 50DGFU63.7 Section Page Specifications 2-38 Selection Chart 2-38 Performance Curves 2-6 Outline Drawings 2-8 Sectional
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
ROBOT PUMPS RT - TURBOTEX PUMPS
ROBOT PUMPS RT - TURBOTEX PUMPS RT- Turbotex pumps The Robot submersible Turbotex pumps form the ultimate solution in today s pumping technology. The self cleaning blade leading edge effectively deals
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
VERTICAL TURBINE AND PROPELLER PUMPS
VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Vertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
How To Pump A Pump
Multistage Pumps P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series MP with smaller
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
Submersible Motor Pump. Amarex N. 50 Hz DN 50 - DN 100. Type Series Booklet
Amarex N Hz DN - DN 100 Type Series Booklet Legal information/copyright Type Series Booklet Amarex N All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited
Flygt Ball Check Valves
4/13 Supersedes: 6/96 The basic purpose of a check valve is to permit flow in one direction, prevent flow in the opposite direction and perform this function automatically and with minimum maintenance.
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
Pumps: Convert mechanical energy (often developed from electrical source) into hydraulic energy (position, pressure and kinetic energy).
HYDRAULIC MACHINES Used to convert between hydraulic and mechanical energies. Pumps: Convert mechanical energy (often developed from electrical source) into hydraulic energy (position, pressure and kinetic
SIGMA GROUP a. s. Divize průmyslová čerpadla
SIGMA GROUP a. s. Divize průmyslová čerpadla SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION Jana Sigmunda 79, 783 50 LUTÍN SEWAGE PUMPS NFPH, NFVH, NFJH, NFRH, NFPV, NFVV, NFJV, NFRV, NFPW NFVW Tel.: +420
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB
Submersible pumps Grundfos With top exit Mop sump pomps Simer en City With top exit Submersible pumps Homa Submersible pumps DAB Grunfos KP sump pump completely made of stainless steel.. Very effective
Pure Performance. Steady 1300 Series
Pure Performance Steady 1300 Series Available EASY TO SELECT, QUICK DELIVERY, THE RIGHT PUMP FOR YOUR NEEDS Oustanding Value EFFICIENT, POWERFUL Reliable SOLIDS HANDLING, CONTINUOUS RUNNING 2 Readily available
Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125
Vogel Pumpen Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125 1 Performance range: Capacities up to 340 m 3 /h (1500 USgpm) Head up to 500 m (1640 feet) Max. speed up to 3600 min
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling
Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
No compromise. Highest total efficiency wastewater pumping. grundfos se & sl ranges Submersible and dry-installed wastewater pumps
grundfos se & sl ranges Submersible and dry-installed wastewater pumps 0.9-30 kw 2, 4, 6 pole 50Hz No compromise Highest total efficiency wastewater pumping ULTIMATE WASTEWATER PUMPING TECHNOLOGY The renewed
Compact pumps from the wastewater experts. FLYGT 3045, 3057, 3068. Power range 0.75 2.4 kw.
Compact pumps from the wastewater experts FLYGT 304, 307, 3068. Power range 0.7.4 kw. Wastewater is unpredictable, Flygt pumps are not If you want a wastewater pump that just works month after month, year
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
IN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]
![1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]](/thumbs/40/20910486.jpg "1.0 2.0 3.0 4.0 5.0 6.0 7.0. Q [m 3 /h] Wilo-Star Cast iron body 60 Hz. Star 30 F. Star 21. Star 17 FX. 4 8 12 16 20 24 28 Q [US gpm]")
Product review: Range: Wilo-Star....... Star F Star Star Star F Star Star FX [m /h] Wilo-Star Cast iron body Hz [US gpm].......... [m /h] Wilo-Star Bronze body 9 Hz [US gpm] Star Star Star Star Star BF
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
Pumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
TECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
Wilo Building Services - Price Book
Pioneering for You 2016 - United States - 60 Hz. Wilo - Price Book Pumps and pump systems for HVAC, pressure boosting, water supply and sump & sewage. Effective - January 1, 2016 20-57-002-1215 FSA-066
Submittal Data Sheet Wilo IPL - Inline Centrifugal Circulators
Wilo IPL 1.5 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM IPL 1.5-1/5-6Hz 1,75 ( Pole) 6 1 H[ft] H[m] Wilo-IPL 1.5-1/5-175
ANDRITZ Ritz Product range Pumps and motors
ANDRITZ Ritz Product range Pumps and motors www.andritz.com 02 Welcome to the world of ANDRITZ Ritz Water supply Mining Industry Sewage For over 125 years, the name ANDRITZ Ritz has stood for the highest
SEG range 0.9 4.0 kw GRUNDFOS WASTEWATER
SEG range 0.9 4.0 kw GRUNDFOS WASTEWATER Grundfos SEG range Tough, versatile pumps for domestic sewage transfer In areas with no sewer systems, or areas where gravitation systems are unsuitable, pressurised
FI Frame-Mounted End Suction Pumps
Water Circulation Pumps & Circulators FI Frame-Mounted End Suction Pumps FI Series Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting, cooling
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
WATER & WASTEWATER. Flygt Submersible Pumps
ATER & ASTEATER Flygt Submersible Pumps Available for rental and SAle Your Task. Our Force. Xylem offers a broad range of Flygt pumps for construction, mining, municipalities, and other markets. e provide
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps.
5 Hz PUMP HANDBOOK Welcome to Grindex Pump handbook! With this handbook we want to share some of our wide experience in pumping with submersible pumps. You will find an overview of all Grindex pumps with
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
Goulds AF. Axial Flow Pump
Goulds AF Axial Flow Pump Goulds AF The Industry Leader in Circulating Pump Technologies Fabricated design 42-66 (1050-1600 mm) (shown with optional spring mounted base) Cast design 6-36 (150-900 mm) Goulds
Tsurumi BER. Submersible Ejectors
Tsurumi BER 400V 50Hz Submersible Ejectors This submersible ejector is composed of a B type pump and a venturi with diffusor trumpet. The large flow from the pump, first, at high speed, draws and mixes
Product Catalogue. ETX, Stainless steel threaded centrifugal pumps, 50 Hz
Product Catalogue ETX, Stainless steel threaded centrifugal pumps, Hz Contents Introduction... ETX... Choosing the right pump There are a wide range of pumps to select from. In order to find the right
JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
V47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
O-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
KESSEL KTP 500 Submersible Pump with lateral and vertical outlet connection Order Numbers 28710, 28810, 28850
INSTALLATION AND OPERATING INSTRUCTIONS KESSEL KTP 500 Submersible Pump with lateral and vertical outlet connection Order Numbers 28710, 28810, 28850 Product advantages Automatic float switch as water
Flygt N-pump series SelF-cleaNiNg pumps with SuStaiNed high efficiency
Flygt N-pump series Self-cleaning pumps with sustained high efficiency Introduction Sustained high efficiency is priceless The N-pump advantage Patented technology Innovative design Sustained high efficiency
CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc.
CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. 1 Centrifugal Pump- Definition Centrifugal Pump can be defined as a mechanical device used to transfer liquid of various types. As
Air Eliminators and Combination Air Eliminators Strainers
Description Air Eliminators and Combination Air Eliminator Strainers are designed to provide separation, elimination and prevention of air in piping systems for a variety of installations and conditions.
QL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps
QL Series Vertical, Double-Suction, Twin-Volute Turbine Pumps QL QLQ QLC QLQC Experience In Motion Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No
Model series CAM / CAM-Tandem
P R O D U C T I N F O R M A T I O N Multistage canned motor pumps Model series CAM / CAM-Tandem Contents Description Description... 2 Application and insertion... 4 Functional principle and materials...
Pump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
RPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
Oil & Gas. CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition.
Oil & Gas CHTR Centrifugal, High-pressure, Multistage Barrel Pump to API 610, 10 th Edition. 2 Introduction CHTR Reliable delivery at high pressure. Day in and day out, KSB pumps prove their worth again
DeZURIK 3" (75MM) & LARGER ECCENTRIC PLUG VALVES
BULLETIN 12.00-1C SUPERSEDES 12.00-1C & 12.60-1A JUNE 2014 DeZURIK 3" (75MM) & LARGER ECCENTRIC PLUG VALVES www.dezurik.com The DeZURIK Eccentric Plug Valve In thousands of installations worldwide, DeZURIK
TECHNICAL BROCHURE BAQUABII. * Available up to 100 GPM systems. Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS
TECHNICAL BROCHURE BAQUABII * Available up to 1 GPM systems Aquavar ABII VARIABLE SPEED CONSTANT PRESSURE SYSTEMS FEATURES The AB2 variable speed pump controller and complete booster package kits, provide
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
SUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
DRS/A40-115-1.1M GRINDER. Q = Portata / Flow rate / Débit Modello l/min 75 120 180 225 240 270 Model m Modèle
DRS/A40-115-1.1M S.C. 07/13 DRS/A40-115-1.1M CURVE DI PRESTAZIONE PERFORMANCE CURVES COURBES DE PERFORMANCE TABELLA PRESTAZIONI PERFORMANCE TABLE TABLEAU DE PERFORMANCES Q = Portata / Flow rate / Débit
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
MTR, MTRE, SPK, MTH, MTA
GRUNDFOS DATA BOOKLET MTR, MTRE, SPK, MTH, MTA Immersible pumps 5/6 Hz MTR, MTRE, SPK, MTH, MTA Table of contents 1. Introduction 3 2. Applications 4 3. Performance range 6 MTR, 5 Hz 6 MTRE, 5 Hz 6 MTR,
P.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
Series 1510 Centrifugal Pumps Technical Bulletin. Bulletin B-207G Bell & Gossett
Bulletin B-7G Bell & Gossett Series 1 Centrifugal Pumps Technical Bulletin For hydronic heating and cooling systems, industrial, pressure boosting and general pumping applications High efficiency, low
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
SIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
Inline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
BOWL ASSEMBLY SELECTION Select impeller in exactly the same manner as for lineshaft type pump. Note comments under WELL SIZE.
SUBMERSIBLE PUMP selection A submersible pump consists of the following basic elements: < Bowl Assembly < Motor < Cable < Drop Pipe < Surface Plate (with)(without) discharge elbow DATA REQUIRED FOR SELECTION
GRUNDFOS INDUSTRY. Grundfos Immersible Pumps
GRUNDFOS INDUSTRY Grundfos immersible pumps a complete and versatile range Universal flange connctions DIN JEM ANSI JIS Plug connector (Harting) () () Suitable for a variety of industrial applications
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY
Vertical Multistage Centrifugal Electric Pumps SV2-4-8-16 Series NEW LASER TECHNOLOGY TYPICAL APPLICATIONS Water supply Transfer and distribution from water systems Pressure boosting in apartment buildings
Conlift1, Conlift2, Conlift2 ph+
GRUNDFOS DATA BOOKLET Conlift1, Conlift2, Conlift2 ph+ Small lifting stations 50 Hz CONLIFT1, CONLIFT2, CONLIFT2 ph+ Table of contents 1. Product overview 3 Conlift for condensate applications 3 Applications
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
Horizontal Split Case Fire Pumpset Electric Motor Driven 50 Hz
SERIES Horizontal Split Case Fire Pumpset Electric Motor Driven 50 Hz Selected Models INTRODUCTION Lubi offers LHCE series state-of-the-art fire pumpset with electric motor driven, horizontal split case
Heating, air-conditioning, cooling
Series description Design High efficiency, single stage, low pressure, inline centrifugal pump Supplied with EC motor and electronic duty adaptation Available in glanded construction, mechanical shaft
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
Planning Information. Börger Rotary Lobe Pumps Börger Chopping Technology
Planning Information Börger Rotary Lobe Pumps Börger Chopping Technology 07/06 BÖRGER GmbH Benningsweg 24 46325 Borken-Weseke Telefon: +49 (0) 28 62 / 91 03-20 P.O.Box 3065. 46314 Borken-Weseke Telefax:
Godwin NC series Dri-Prime pumps
Godwin NC series Dri-Prime pumps now with Flygt N-technology INTRODUCTION 2 We combined the world s most reliable portable pumps with the world s most efficient self-cleaning hydraulics To bring you the
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
SIGMA GROUP a. s. INDUSTRIAL PUMP DIVISION
SIGA GROUP a. s. INDUSTRIAL PUP DIVISION SIGA GROUP a. s. INDUSTRIAL PUP DIVISION Jana Sigmunda 79, 783 50 TÍN SDGE PUPS GFPP, GFPT, GFVP, GFVT, GFRP, GFJP, GFAP, NFPU, NFVU, NFPT, NFVT, NFP, NFV, NFAU
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
VX Series Pumps Rotary Lobe Pumps designed for abrasive and viscous liquids. HIGH PERFORMANCE PUMPS DESIGNED FOR TOUGH APPLICATIONS ENGINEERED TO WORK
ENGINEERED TO WORK HIGH PERFORMANCE PUMPS DESIGNED FOR TOUGH APPLICATIONS VX Series Pumps Rotary Lobe Pumps designed for abrasive and viscous liquids. Industry Agriculture Mining Biogas Agriculture Wastewater