Field Replaceable. Flange Mount. Cable Connector. Cable Connectors (Features & Benefits) Field Replaceable Cable Connectors...

Transcription

1 Standard Flange Mount Termination Connector Miniature Flange Mount Termination Field Replaceable Flange Mount Connector Field Replaceable Connector End Index... Page (Features & Benefits) Field Replaceable Flange Mount Terminations Unless otherwise specified, all dimensions are in inches. 66

2 Field Replaceable Features & Benefits: Center conductor of the cable launches into the rear female socket of the connector Built-in stress relief accommodates cable center conductor movement Front Panel Mount Rear Panel Mount Rear Panel Inline Front Inline & Terminations Features & Benefits: Center conductor of the cable launches into the rear female socket of the connector Inspection hole on the outer conductor Built-in stress relief accommodates cable center conductor movement and Terminations connectors easily replaced without unsoldering Interchangeability of connector types for unsurpassed flexibility More consistent electrical performance by eliminating the solder variable on the center conductor Flange Mount Terminations Jack More consistent electrical performance by eliminating the solder variable on the center conductor Inspection hole insures proper insertion of the cable center conductor End Plug Users are cautioned that performance is dependent upon the specific cable selected and cable preparation and termination, which is beyond the control of Southwest Microwave. 67

3 Field Replaceable Materials & Finishes Materials: : Environmental: For Tool (See ). Recommended Torque is 1518 in-lbs. Inline SMA Series.102 [ 2.60 ].291 [.739 ].393 [ 9.98 ].300 [ 7.62 ] SMA Series End Front Panel Mount SMA Series.328 [ 8.33 ].393 [ 9.98 ].065 [ 1.65 ].300 [ 7.62 ] SMA Series Rear Panel Mount (Maximum Panel Thickness is.345 ) SMA Series.065 [ 1.65 ].328 [ 8.33 ].393 [ 9.98 ].300 [ 7.62 ] SMA Series Dimensions 4 x Ø.104 [ Ø 2.65 ] [ 8.64 ] [ 12.7 ].280 [ 7.11 ].481 Ø.625 [ ] [ ] Drill and Tap for # 2-56 UNC Thread.340 [ 8.63 ].340 [ 8.63 ] Ø.310 [ 7.87 ].481 [ ].345 Maximum Panel Thickness Mating Connector Coupling Nut.340 [ 8.64 ].500 [ 12.7 ] 2 PL Ø.102 [ Ø 2.59 ] 2-Hole Pattern Panel 4-Hole Pattern Inside Panel Rear Mount Clearance 68

4 Field Replaceable Connector Kits (DC to 27 GHz) Center Inline SF SF SF SF SF SF Center H.625 Front Panel Mount SF SF SF 4H.500 Front Panel Mount SF SF SF SF SF SF SF SF SF 2H.625 Rear Panel Mount SF SF SF 4H.500 Rear Panel Mount SF SF SF SF SF SF SF SF SF Connector Kits (DC to 36 GHz) Connector Kits (DC to 40 GHz) Center Center Inline SF SF SF SF Inline SF SF SF SF 2H.625 Front Panel Mount 2H.625 Front Panel Mount SF SF SF SF 2H.625 Rear Panel Mount 2H.625 Rear Panel Mount SF SF SF SF End Center 4H.500 Front Panel Mount SF SF SF SF 4H.500 Rear Panel Mount SF SF SF SF Connector Kits (DC to 50 GHz) Center Inline SF SF Center SF SF 2H.625 Front Panel Mount SF SF SF SF 2H.625 Rear Panel Mount SF SF SF SF 4H.500 Front Panel Mount SF SF 4H.500 Rear Panel Mount SF SF SF SF SF SF 69

5 (27 GHz), (40 GHz), (40 GHz), (50 GHz) and 1.85 mm (65 GHz) General Features: End Actual Size Materials & Finishes Materials: Finishes: Environmental: Users are cautioned that performance is dependent upon the specific cable selected and cable preparation and termination, which is beyond the control of Southwest Microwave. 70

6 .308 [ ].308 [ ].308 [ ] 1.85 mm.307 [ ].335 [ ].344 [ ].350 [ ].350 [ ] Identification Notch 1.85 mm Identification Groove Center Center LL Connector No G G G LL G Center Connector No G G Connector No G G Connector No G G.0253 LL G G LL G Center G LL G Not currently released. End Connector Assembly (1.85 mm Illustrated) L Plug Users are cautioned that performance is dependent upon the specific cable selected and cable preparation and termination, which is beyond the control of Southwest Microwave. Plug 71

7 Electrical: Materials / Construction: 2-Hole.625L Termination (DC to 40 GHz) Solder Eyelet Flange Mount Terminations DC to 40 GHz (Mini: DC to 36 GHz) Low VSWR Low RF Leakage Housing: Unitized Stainless Steel, Gold Plate Per MIL-DTL (Mini: Beryllium Copper (BeCu), Gold Plated Per MIL-DTL-45204) Center Contact: BeCu, Gold Plated Per MIL-DTL Capture Bead: ULTEM 1000 Per ASTM D5205 Dielectric: PTFE Fluorocarbon (Mini: Air) Raised Metal Grounding Ring for 360 Metal-to-metal Contact Solder Inspection Hole for Center Conductor Alignment and Solder Flow Flexible and Semi-rigid Raised Metal Contact Ring (360 Contact) Ø Ø Center Accepts Pin Dia..015 Conn. No G G G Raised Metal Contact Ring (360 Contact) Rear Socket End 2-Hole.550L Termination (DC to 40 GHz) Solder Eyelet Raised Metal Contact Ring (360 Contact) Ø Center Accepts Pin Dia..015 Conn. No G G G Raised Metal Contact Ring (360 Contact) Ø Rear Socket 2-Hole.270L (Mini) Termination (DC to 36 GHz).270 [6.86].079 [2.01] Typ. Socket to Accept.009 [0.229] Pin.034 [.86] Ref [2.95] Ø Ø.100 [2.54] Raised Grounding Ring Ø.100 [2.54].090 [2.29].220 [5.59].003 [.08] Ref. Raised Grounding Ring.045 [1.14].032 [0.81] Thru Both Sides.072 [1.83] Ø.058 [1.22] Center [2.223].175 [4.45].270 [6.90] Accepts Pin Dia..009 (2X.068 Ref.) Mounting Holes for #0-80 Screws Conn. No G Cavity for Semi Rigid Users are cautioned that performance is dependent upon the specific cable selected and cable preparation and termination, which is beyond the control of Southwest Microwave. Unless otherwise indicated, all dimensions are in inches. 72

8 Typical Test Data S11 (VSWR) Test Data (d G) Assembly 1 Assembly Frequency (GHz) Flange Mount Terminations To electrically evaluate the Flange Mount Terminations, a back-to-back pair was inserted in line into a reference cable assembly and tested to 40 GHz. The data shows the reference cable (Assembly 1) and the cable assembly with the Terminations added (Assembly 2 ) overlaid. The difference is the contribution of the two added terminations S21 (IL db) Actual Size.625 Connector No G The diagrams below show the test configurations: Reference Assembly 1 -to- Connector Assembly 6.65 in. Reference Assembly 2 Assembly 1 Split and Reconnected with (2) Flange Mount Termination. 7.0 in. Semi-Rigid Semi-Rigid.350 in. Flange Mount Connector No G End S11 (VSWR) Test Data d (Mini) G 0G S21 (IL db) Actual Size (Mini) Connector No G Frequency (GHz) The data above is for 2 sets of field-replaceable cable plug/male connectors with Flex terminated to connector G. The two G connectors are terminated back-to-back with.009 inch dia. pin and are attached to a base plate to simulate panel mounting. Both cables have the same electrical length, to = 6 inches. Results may vary by cable selected and assembly method. Contact Southwest Microwave for Assembly Instructions. Users are cautioned that performance is dependent upon the specific cable selected and cable preparation and termination, which is beyond the control of Southwest Microwave. 73