MET-PRO DEAN PUMP SERIES RA P A K D A T A. Global Pump Solutions. Fan Cooled Hot Oil Pumps. Section RA
|
|
|
- Kelley Wright
- 7 years ago
- Views:
Transcription
1 A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES RA Fan Cooled Hot Oil Pumps D A T A P A K Section RA
2 SERIES RA FAN COOLED HOT OIL PUMPS FAN COOLED, HORIZONTAL, SINGLE STAGE, END SUCTION, ENCLOSED IMPELLER, CENTRIFUGAL, HOT OIL PUMPS MECHANICAL DESIGN SPECIFICATIONS PUMP TYPE RA2096 RA3146 RA3186 Direction of Rotation (Viewed from Coupling End) CW CCW CCW Casing Thickness, Minimum 5/16 5/16 5/16 Corrosion Allowance 1/8 1/8 1/8 Impeller Balance Standard Optional Extra Flanges ANSI Class Facing Finish Single Plane Dynamic 150 Flat Face 125 Ra Single Plane Dynamic 300 Raised Face 125 Ra ALLOWABLE WORKING PRESSURE VS. PUMPING TEMPERATURE Single Plane Dynamic 300 Raised Face 125 Ra Suction Pressure, Maximum 100 PSIG 100 PSIG 100 PSIG Horsepower Rating, RPM Bearings: Thrust Bearing, Ball Type, Grease Lubricated Rarial Bearing, Sleeve Type, Pumpage Lubricated Seal Chamber Dimensions Length (Depth) Inside Diameter (Bore Dia.) Shaft Diameter Pump Shaft Dimensions Span Between Bearings Span Between Radial Bearing Centerline and Impeller Centerline Diameter at Coupling Diameter Between Bearings Diameter at Impeller RS Double Row 1 5 /8 2 1 / / / /8 7/8 15/16 3/ BG 7311 BG Angular Contact Pair Angular Contact Pair 2 13 / /8 1 3 / / / /8 1 9 / /8 3 7 /8 4 5 / / /8 3 1 /4 1 5 /8 1 7 /8 1 1 /8 L 3 /D Material Class 22 (Ductile Iron) 22 (Ductile Iron) 22 (Ductile Iron) Maximum Working Pressure PSIG 350 PSIG Pumping Temperature Minimum Maximum Maximum Ambient Temperature (temp. within 12 of pump) PSIG PSIG -20ºF 650ºF -20ºF 650ºF 104ºF 118ºF 118ºF Hydrostatic Test Pressure 430 PSIG 550 PSIG 550 PSIG THESE PUMPS ARE DESIGNED SPECIFICALLY FOR USE WITH HEAT TRANSFER OILS. THESE PUMPS WILL NOT WORK ON OTHER LIQUIDS. Part No. Part Name RA2096 Class 22 RA3146 Class 22 RA3186 Class 22 3 Impeller C.I. (1) C.I. (1) C.I. (1) *4 Impeller Key Steel (2) Steel (2) Steel (2) 5 Casing D.I. (10) D.I. (10) D.I. (10) 5A Casing Drain Plug Steel (2) Steel (2) Steel (2) 5C Casing Stud Nut N.A. Steel (5) Steel (5) 5D Casing Stud/Cap Screw Steel (3) Screw Steel (4) Stud Steel (4) Stud 6A Casing Ring (Only Some Sizes) N.A. Iron (7) Iron (7) 9 Bearing Housing Foot Steel (2) Steel (2) Steel (2) *12 Impeller Bolt/Nut Steel (2) Nut Steel (2) Bolt Steel (2) Bolt *12A Impeller Washer Steel (2) Steel (2) Steel (2) *13 Mechanical Seal Gland Steel (2) Steel (2) Steel (2) *25A Shaft Bearing Thrust Ball Double Row Angular Contact Pair Angular Contact Pair 26 Bearing Housing D.I. (10) D.I. (10) D.I. (10) *28 Bearing End Cover C.I. (1) Steel (2) D.I. (9) *29 Pump Shaft S/S (12) S/S (12) 11-13/316 S/S (8) *31 Thrust Bearing Lock Nut N.A. Steel (2) Steel (2) *31A Thrust Bearing Lock Washer N.A. Steel (2) Steel (2) 56 Casing Foot N.A. C.I. (1) C.I. (1) *75 Snap Ring N.A. Steel (2) N.A. *75A Snap Ring Steel (2) N.A. N.A. *76 Grease Seal Front Viton (13) Viton (13) Viton (13) *76A Grease Seal Rear N.A. Buna (14) Buna (14) 77 Casing Gasket Grafoil (11) Grafoil (11) Grafoil (11) *77B Bearing End Cover Gasket N.A. Buna (14) Buna (14) *84 Barrier Oil Fill Plug Steel (2) Steel (2) Steel (2) *92 Barrier Oil Drain Plug Steel (2) Steel (2) Steel (2) *95A Mechanical Seal Stationary *95B Mechanical Seal Rotary STANDARD MATERIALS OF CONSTRUCTION Silicon Carbide & Viton S/S, Carbon & Viton Silicon Carbide & Viton S/S, Carbon & Viton Silicon Carbide & Viton S/S, Carbon & Viton 98 Coupling Guard Steel (2) Steel (2) Steel (2) *120 Fan Aluminum Aluminum Aluminum *121 Fan Collar N.A. Steel (2) Steel (2) *122 Fan Clamp Ring Steel (2) Steel (2) Steel (2) *180 Radial Bearing Cartridge Carbon & Steel Carbon & Steel Carbon & 416 S/S *325 Seal Gland Gasket Viton (13) Viton (13) Viton (13) *365 Mechanical Seal Retainer Steel (2) Steel (2) Steel (2) *370 Seal Retainer Set Screw Steel Steel Steel *375 Anti-Rotation Pin N.A. N.A. 316 S/S *Denotes parts interchangeability in all pump sizes of a given series. (1) Cast Iron (2) AISI 1020 (3) SAE Grade 5 or ASTM A449 Type 1 Steel (4) AISI 4140 ASTM A193-B7 Steel (5) ASTM A194 Grade 2 Steel (7) Hardened Iron (8) ANSI 316 S/S with ANSI 416 S/S at the sleeve bearing (9) Ductile Iron ASTM A536 (10) Ductile Iron ASTM A395 (11) Grafoil (12) ANSI 420 S/S (13) Viton Elastomer (14) Buna N Rubber Viton is a registered Trademark of E.I. DuPont Co. Grafoil is a registered Trademark of Union Carbide Corp. 1
3 SERIES RA FAN COOLED HOT OIL PUMPS RA SERIES PUMP PERFORMANCE 2
4 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-2096 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 150 FACING Flat Face FINISH Ra MOTOR FRAME CG HS HT 143T/145T T/184T T/215T T/256T TS/286TS PUMP SIZE 1 x 1 1 /2 x 6 *1 1 /2 x 3 x 6 1 x 1 1 /2 x 8 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /4 9/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 / /2 15/ / /4 9/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 /2 IMPORTANT: Do not use for construction unless certified. DIMENSION DWG. NO. RA
5 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-2096 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 150 FACING Flat Face FINISH Ra PUMP SIZE 1 x 1 1 /2 x 6 *1 1 /2 x 3 x 6 1 x 1 1 /2 x 8 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /4 9/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 / /2 15/ / /4 9/ /8 4 1 /2 1 1 /2 5 11/ /8 4 1 /2 FRAME C AB HA HA 1 HB HD HE HG HM 143T 13 1 /4 6 1 / /2 4 1 /2 3 1 / /4 145T 13 3 /4 6 1 / /2 4 1 /2 3 1 / /4 182T 14 5 /8 7 1 / /2 4 1 /2 3 1 / /4 184T 15 5 /8 7 1 / /2 4 1 /2 3 1 / /4 213T 18 1 /8 9 1 / /2 4 1 /2 3 1 / /4 215T 19 5 /8 9 1 / /2 4 1 /2 3 1 / /4 254T 23 1 / / / /8 256T 24 7 / / / /8 284TS 25 1 / / / / /8 286TS / / / /8 324TS 28 3 / / / /4 4 1 /2 3 3 / /2 IMPORTANT: Do not use for construction unless certified. DIMENSION DWG. NO. RA
6 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-3146 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 300 FACING Raised Face FINISH Ra MOTOR FRAME CG 143T/145T T/184T T/215T T/256T TS/286TS TS/326TS TS/365TS 7.13 PUMP SIZE *1 x 3 x 8 1 /2 1 1 /2 x 3 x 8 1 /2 2 x 3 x 8 1 /2 *3 x 4 x 8 1 /2 *4 x 6 x 8 1 /2 1 1 /2 x 3 x 10 2 x 3 x 10 3 x 4 x 10 4 x 6 x 10 #2 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /8 11/ /2 4 5 / /4 1 1 /8 6 5 /8 8 3 /4 1 1 /2 6 1 /8 13/ /2 4 3 / /4 1 1 /8 6 5 /8 8 3 / /2 7/ / /4 1 1 /8 6 5 /8 8 3 / /4 1 1 /8 6 5 /8 8 3 / /4 7 7 /8 8 3 / /4 7 7 /8 8 3 / /2 1 7 / / /4 1 1 /2 6 1 /8 13/ /2 4 3 / /4 1 1 /8 6 5 /8 8 3 / /2 7/ / /4 1 1 /8 6 5 /8 8 3 / /4 1 1 /8 6 5 /8 8 3 / /4 7 7 /8 8 3 / /4 7 7 /8 8 3 / /2 1 7 / / /4 ** 3 /4" NPT with 3" and 4" discharge A 1 A 2 D S X Y 8 1 /8 8 1 /8 8 1 / / /8 8 1 /8 8 1 / / /8 8 1 /8 8 1 / / / /4 8 1 /8 10 5/ / / / / /8 8 3 / / /2 1/ /2 6 IMPORTANT: Do not use for construction unless certified. DIMENSION DWG. NO. RA
7 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-3146 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 300 FACING Raised Face FINISH Ra PUMP SIZE *1 x 3 x 8 1 /2 1 1 /2 x 3 x 8 1 /2 2 x 3 x 8 1 /2 *3 x 4 x 8 1 /2 *4 x 6 x 8 1 /2 1 1 /2 x 3 x 10 2 x 3 x 10 3 x 4 x 10 4 x 6 x 10 #2 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /8 11/ /2 4 5 / /4 1 1 /8 6 5 /8 8 3 /4 1 1 /2 6 1 /8 13/ /2 4 3 / /4 1 1 /8 6 5 /8 8 3 / /2 7/ / /4 1 1 /8 6 5 /8 8 3 / /4 1 1 /8 6 5 /8 8 3 / /4 7 7 /8 8 3 / /4 7 7 /8 8 3 / /2 1 7 / / /4 1 1 /2 6 1 /8 13/ /2 4 3 / /4 1 1 /8 6 5 /8 8 3 / /2 7/ / /4 1 1 /8 6 5 /8 8 3 / /4 1 1 /8 6 5 /8 8 3 / /4 7 7 /8 8 3 / /4 7 7 /8 8 3 / /2 1 7 / / /4 ** 3 /4" NPT with 3" and 4" discharge A 1 A 2 D S X Y 8 1 /8 8 1 /8 8 1 / / /8 8 1 /8 8 1 / / /8 8 1 /8 8 1 / / / /4 8 1 /8 10 5/ / / / / /8 8 3 / / /2 1/ /2 6 FRAME C AB HA HB HG HH HM D=8 1 /4 D=10 D=11 1 /2 FRAME C AB HA HB HG HH HM D=8 1 /4 D=10 D=11 1 /2 143T 13 1 /4 6 1 / /4 3/ / / /8 145T 13 3 /4 6 1 / /4 3/ / / /8 182T 14 5 /8 7 1 / /4 3/ / /2 184T 15 5 /8 7 1 / /4 3/ / /2 213T 18 1 /8 9 1 / /4 3/ / /4 215T 19 5 /8 9 1 / /4 3/ / /4 254T 23 1 / / /8 3/ / / /8 256T 24 7 / / /8 3/ / / /8 284T 26 7 / / /8 3/ / / /8 284TS 25 1 / / /8 3/ / / /8 IMPORTANT: Do not use for construction unless certified. 286T 28 3 / / /8 3/ / / /8 286TS / /8 3/ / / /8 324T 29 7 / / / / / TS 28 3 / / / / / T 31 3 / / / / / TS 29 7 / / / / / T 33 1 / / / /8 364TS 31 1 / / / /8 365T 34 1 / / / /8 365TS 32 1 / / / /8 DIMENSION DWG. NO. RA
8 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-3186 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 300 FACING Raised Face FINISH Ra MOTOR FRAME 254T/256T 284T/286T 324T/326T 364T/365T 364TS/365TS 404TS/405TS 444T/445T 444TS/445TS 447TS/449TS CG FOR CPL. SPACER PUMP SIZE 4 x 6 x 10 #1 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /4 7 7 /8 8 3 / /2 1 7 / / /4 7 IMPORTANT: Do not use for construction unless certified. DIMENSION DWG. NO. RA-2002
9 SERIES RA FAN COOLED HOT OIL PUMPS DIMENSIONAL DRAWINGS RA-3186 WITH SHAFT FAN FLANGES: A.N.S.I. RATING...Class 300 FACING Raised Face FINISH Ra PUMP SIZE 4 x 6 x 10 #1 All dimensions in inches DISCHARGE SUCTION SIZE O.D. THK B.C. BOLTS SIZE O.D. THK B.C. BOLTS /4 7 7 /8 8 3 / /2 1 7 / / /4 FRAME C AB HB HM QTY. OF GROUT HOLES 254T 22 7 / / T 24 3 / / T 26 3 / / / T 28 1 / / / TS 28 1 / / / T 29 3 / / / TS 29 3 / / / T 31 1 / / / TS 31 1 / / /8 3 FRAME C AB HB HM QTY. OF GROUT HOLES 364T 32 7 / / / TS 32 1 / / / T 33 7 / / / TS 33 1 / / / T 36 1 / / / TS / / T / / TS 38 1 / / / TS 40 1 / / /8 5 IMPORTANT: Do not use for construction unless certified. DIMENSION DWG. NO. RA
10 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE RA1060-A2 PUMP SIZE: 1" X 1 1 /2" X 6" PUMP TYPE: RA2096 FAN COOLED 1" DISCHARGE X 1 1 /2" SUCTION 9
11 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE RA1080-A2 PUMP SIZE: 1" X 1 1 /2" X 8" PUMP TYPE: RA2096 FAN COOLED 1" DISCHARGE X 1 1 /2" SUCTION 10
12 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R1085-A2 PUMP SIZE: 1" X 3" X 8 1 /2" PUMP TYPE: RA3146 FAN COOLED 1" DISCHARGE X 3" SUCTION 11
13 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE RA1560-A2 PUMP SIZE: 1 1 /2" X 3" X 6" PUMP TYPE: RA2096 FAN COOLED 1 1 /2" DISCHARGE X 3" SUCTION 12
14 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R1585-A2 PUMP SIZE: 1 1 /2" X 3" X 8 1 /2" PUMP TYPE: RA3146 FAN COOLED 1 1 /2" DISCHARGE X 3" SUCTION 13
15 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R15100-A2 PUMP SIZE: 1 1 /2" X 3" X 10" PUMP TYPE: RA3146 FAN COOLED 1 1 /2" DISCHARGE X 3" SUCTION 14
16 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R2085-A2 PUMP SIZE: 2" X 3" X 8 1 /2" PUMP TYPE: RA3146 FAN COOLED 2" DISCHARGE X 3" SUCTION 15
17 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R20100-A2 PUMP SIZE: 2" X 3" X 10" PUMP TYPE: RA3146 FAN COOLED 2" DISCHARGE X 3" SUCTION 16
18 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R3085-A1 PUMP SIZE: 3" X 4" X 8 1 /2" PUMP TYPE: R4140, R5140, RA3146 3" DISCHARGE X 4" SUCTION 17
19 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R30100-A1 PUMP SIZE: 3" X 4" X 10" PUMP TYPE: R4140, R5140, RA3146 3" DISCHARGE X 4" SUCTION 18
20 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R4085-A1 PUMP SIZE: 4" X 6" X 8 1 /2" PUMP TYPE: R4140, R5140, RA3146 4" DISCHARGE X 6" SUCTION 19
21 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R40100-B2 PUMP SIZE: 4" X 6" X 10" #2 PUMP TYPE: R4140, R5140, RA3146, RWA4166 4" DISCHARGE X 6" SUCTION 20
22 CENTRIFUGAL PUMP PERFORMANCE DATA: CURVE R40100-A1 PUMP SIZE: 4" X 6" X 10" #1 PUMP TYPE: R450, R5180, RA3186, RWA4206 4" DISCHARGE X 6" SUCTION 21
23 A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco 6040 Guion Road Indianapolis, IN (317) FAX: (317) Web Site: COPYRIGHT 2012 MET-PRO CORPORATION, DEAN PUMP DEAN PUMP IS A REGISTERED TRADEMARK OF MET-PRO CORPORATION
Model 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
Series 1510 Centrifugal Pumps Technical Bulletin. Bulletin B-207G Bell & Gossett
Bulletin B-7G Bell & Gossett Series 1 Centrifugal Pumps Technical Bulletin For hydronic heating and cooling systems, industrial, pressure boosting and general pumping applications High efficiency, low
CRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
TECHNICAL BROCHURE B5-33GB 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB GB, 7GB, 1GB, 18GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. Optional Stainless Steel Construction:
CRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
Model 413 AURORA. 410 Series SINGLE STAGE SPLIT CASE PUMPS WWW.AURORAPUMP.COM
Model Model AURORA Series SINGLE SAGE SPLI CASE PUMPS WWW.AURORAPUMP.COM SINGLE SAGE SPLI CASE PUMPS AURORA Series Single Stage Split Case Pumps Capacities to 00 GPM (0 m /hr) Heads to Ft. (0 m) emperatures
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
FI Frame-Mounted End Suction Pumps
Water Circulation Pumps & Circulators FI Frame-Mounted End Suction Pumps FI Series Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting, cooling
300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
Inline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
TC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
Horizontal Jet Pumps 1/3-1-1/2 HP
Horizontal Jet s 1/3-1-1/2 FW01 0909 Supersedes 0409 The CPJ, CPH and EK models feature the famous Flint and Walling Service Plus motor, available in either NEMA J or Uni-frame flange construction. The
OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610)
OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) The Heart of Your Process OHV / OHVL Type OH3 Vertical Inline Pumps ISO 13709 (API 610) OHV OHVL OHV/OHVL Sales Presentation slide
Multistage high-pressure multistage centrifugal pumps
Series description Wilo-Helix V 2 4 6 8 Wilo-Helix V 19-27 7 6 6 Hz - North America 22 2 18 5 16 14 4 12 3 1 V 1 V 19 V 27 8 2 6 1 5 1 15 2 25 3 4 2 35Q[US gpm] H[ft] H[m] Design Vertical multi-stage,
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
SJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
Pump Shaft Sleeves - Stratford Engineering
Pump shafts are usually protected from erosion, corrosion, and wear at seal chambers, leakage joints, internal bearings, and in the waterways by renewable sleeves. The most common shaft sleeve function
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
KF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
IN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
BOWIE PUMPS OPERATION - MAINTENANCE
BOWIE PUMPS OPERATION - MAINTENANCE PUMPING PRINCIPLE: The meshing owieeof the gears cause a slight depression, with the resulting enmeshing of the gears causing a vacuum drawing the fluid being pumped
How To Pump A Pump
Multistage Pumps P, PVa, MP 300 Technical Data Performance range: m Capacities up to 1800m 3 /h (8800USgpm) m Head up to 300m (1000feet) m Max. speed up to 1750rpm Multistage pumps of series MP with smaller
John Crane Type 5610 and 5610Q Single O-Ring Cartridge Seal Assembly and Installation Instructions
I-5610/5610Q-A John Crane Type 5610 and 5610Q Single O-Ring Cartridge Seal Assembly and Installation Instructions Foreword These instructions are provided to familiarize the user with the seal and its
Owner s Manual. Models: 2S5P & 3S5P OPERATION AND MAINTENANCE OF SELF-PRIMING CENTRIFUGAL TRASH PUMPS PEDESTAL DRIVE
Owner s Manual Models: 2S5P & 3S5P OPERATION AND MAINTENANCE OF SELF-PRIMING CENTRIFUGAL TRASH PUMPS PEDESTAL DRIVE WARNING!! Installation & Operating Instructions Self-Priming Centrifugal Pump DO NOT
DISASSEMBLY & ASSEMBLY INSTRUCTIONS MULTISTAGE CENTRIFUGAL PUMPS TMA
DISASSEMBLY & ASSEMBLY INSTRUCTIONS MULTISTAGE CENTRIFUGAL PUMPS TMA INTRODUCTION These instructions are for the maintenance personnel for maintenance and/or repair of the indicated pump series. Disassembly
Vertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
HORIZONTAL PUMPING SYSTEM
HORIZONTAL PUMPING SYSTEM BORETS U.S. INC. PERFORMANCE TECHNOLOGY INNOVATION Horizontal Pumping System What is HPS? HPS classification, Pumps, Stages, Impellers, Curves/Performance, Components Why use
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125
Vogel Pumpen Vogel - Multistage Pumps Design MP, MPA, MPB, MPV Sizes DN 40 - DN 125 1 Performance range: Capacities up to 340 m 3 /h (1500 USgpm) Head up to 500 m (1640 feet) Max. speed up to 3600 min
45 URAI DSL 816-741-0282. Roots. Quick Specs. Also Available in: Part Number T30353020
45 URAI DSL Part Number T30353020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated
KTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
JOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
ALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
VERTICAL TURBINE AND PROPELLER PUMPS
VERTICAL TURBINE AND PROPELLER PUMPS INTRODUCTION Vertical Turbine and Propeller Pumps Model 7000 Series Turbine Pump Model 800 Series Axial Flow Propeller Pump Model 800 Series Mixed Flow Propeller Pump
Standard offering (pumps)
MDM PUMPS LTD Spring Lane Malvern, Worcs. England. WR14 1BP This outlines what we typically supply. Tel: +44 (0)1684 892678 Fax: +44 (0)1684 892841 E-mail: Website: Standard offering (pumps) info@mdmpumps.co.uk
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
SERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
VIKING HEAVY DUTY PUMPS SERIES 4195 STANDARD CONSTRUCTION
VIKING HEAVY DUTY PUMPS Section 44 Page 44. Issue C FEATURES Pressure Range Temperature Range Viscosity Range 250 PSI ( BAR) for 00 SSU ( cst) and above 50 PSI (0 BAR) for 8 to 00 SSU ( cst to cst) 00
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
CRK 2-130 A-W-A-BUBV 85805906
GRUNDFOS DATA BOOKLET CRK 2-13 A-W-A-BUBV 858596 Grundfos Pump 497113 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crk2/497113/crk-2-13-13-a-w-a-auuv.html
SERIES 127A AND 4127A STAINLESS STEEL SIZES H, HL, K, KK, L, LQ, LL CONTENTS UNMOUNTED PUMP UNITS
TECHNICAL SERVICE MANUAL UNIVERSAL SEAL HEAVY DUTY PUMPS SERIES 124A, 4124A, 124AE, 4124AE, AND 4124B CAST IRON SERIES 126A AND 4126A DUCTILE IRON SERIES 123A AND 4123A STEEL SERIES 127A AND 4127A STAINLESS
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
MULTISTAGE CENTRIFUGAL PUMPS
MULTISTAGE CENTRIFUGAL PUMPS MULTISTAGE CENTRIFUGAL PUMPS TK - TKR - VTK - TKK series TK-VTK-TKR-TKK are high pressure multistage pumps. Connection to the driving machine (generally an electrical motor)
PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR
Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand
OUR PRODUCTS TRH-TRS-TRM-TRV. LIQUID RING VACUUM PUMPS AND COMPRESSORS Capacity up to 2100 ACFM Vacuum to 29 Hg. Our Other Products.
Our Other Products OUR PRODUCTS Liquid Ring & Rotary Vane Vacuum Pumps and Systems Liquid Ring Vacuum Pumps: 3 CFM to,000 CFM Liquid Ring Compressors up to 1 psig Heat Transfer Pumps for hot thermal oils
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
Series 1510 and 1510/Universal Centrifugal Pumps
Bell & Gossett INSTRUCTION MANUAL P81673 REVISION F Series 1510 and 1510/Universal Centrifugal Pumps Installation, Operation and Service Instructions INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will
Tube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
Flygt 3068, 50Hz. Technical Specification
Flygt 3068, 50Hz Technical Specification Table of Contents Table of Contents B-pump...2 Product description...2 Motor rating and performance curves...4 C-pump...6 Product description...6 Motor rating
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling
Pump Specifications 405 Series Commercial Drain Pump (High-Temp) 2 Solids handling 405_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
Flows to 18 GPM. Pressure to 100 PSI
Markets Agriculture-fertilizers, pesticides Automotive-coolants, lubricants Book Mfg-adhesives, glue Construction & Mining-lubricants, fuels, coolants Filtration System Pumps-portable, stationary Food
IMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
Maintenance and Service Instruction
Screw pumps E4 Maintenance and Service Instruction E4 1 IMO AB This instruction is valid for all E4 pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
ZOP, ZOT SIGMA PUMPY HRANICE GEAR PUMPS 426 1.99 21.04
SIGMA UMY HRANICE GEAR UMS SIGMA UMY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz, 426 1.99 21.04 Application In
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
Project: Model: Chk d: Date: Model 32DGUII61.5S
Contents Model 32DGUII6.5S 32DGFU6.5S 32DGFU6.5 50DGFU62.2S 50DGFU62.2 50DGFU63.7S 50DGFU63.7 Section Page Specifications 2-38 Selection Chart 2-38 Performance Curves 2-6 Outline Drawings 2-8 Sectional
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
DODGE USAF 200/300 Direct Mount Pillow Block Bearings
DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and
Two Stage Water Ring Vacuum Pump VWS II Series
Two Stage Water Ring Vacuum Pump VWS II Series PPIS ISO 9001: 2008 CERTIFIED COMPANY Thank you for purchasing the PPI WATER RING VACUUM PUMP Before using the pump, please read the operating instructions
Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW
Installation, Operating and Maintenance Instructions 90/4.5.5 Rev. 0 Constantemp Double Wall Low pressure steam-water Heater F-340LDW,F-640LDW, F-940LDW and F-1240LDW Table of Contents SECTION I... 2 INSTALLATION...
MEMBRANE VACUUM MINI PUMPS
MEMBRANE VACUUM MINI PUMPS The mini pumps described in this page are membrane-type. They can be used both as vacuum pumps and compressors. In the latter version they can supply compressed air 100% oil-free
OPERATION ASSEMBLY INSTRUCTIONS AND PARTS LIST FOR L10 DRIVE END (FRAME SIZES 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, 9P6)
Section: L and J FRAME PUMPS Page: 1 Date: (Revision 5/88) OPERATION ASSEMBLY INSTRUCTIONS AND PARTS LIST FOR L10 DRIVE END (FRAME SIZES 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, 9P6) GENERAL The
TECHNICAL SERVICE MANUAL
TECHNICAL SERVICE MANUAL HEAVY-DUTY PUMPS SERIES 4195 AND 495 SIZES GG - AL SECTION TSM 144 PAGE 1 of 10 ISSUE D CONTENTS Introduction....................... 1 Safety Information.................... 2
BSM MOTOR DRIVEN CENTRIFUGAL PUMPS
PRINCIPLE OF OPERATION A hydraulically and dynamically balanced impeller with raised vane sections discharges liquid as a result of the centrifugal force developed in rotation. The head developed is entirely
Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors
Char-Lynn Spool Valve Hydraulic Motors Repair Information W Series Geroler Motors with Parking Brake 004 Nut Key Ring, Retaining Bearing Ring, Retaining Ring, Retaining Washer (Thick), Pressure Washer,
Volkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
Bell & Gossett Parts List DHP-650-PL. Replacement Parts for Hoffman Series VBF & Hoffman Series HBF. Boiler Feed Units
Bell & Gossett Parts List DHP-650-PL Replacement Parts for Hoffman Series VBF & Hoffman Series HBF Boiler Feed Units SERIES VBF & HBF Index How to use this Parts List...Page 3 30 VBF (Part number 161024
HALCO Installation, Operation
HALCO Installation, Operation and Maintenance Instructions For HALCO 2500 SUPREME PUMPS HAL OILFIELD PUMP & EQUIPMENT, INC. 11300 WINDFERN HOUSTON, TEXAS 77064 PHONE 281-517-3100 FAX 281-517-0350 EMAIL
UNITS Units are designated by the unmounted pump model numbers followed by a letter indicating drive style.
TECHNICAL SERVICE MANUAL UNIVERSAL SEAL HEAVY DUTY PUMPS SERIES 124A, 4124A, 224A, 224AH, 4224A AND 4224Ah CAST IRON SERIES 126A, 4126A, 226A AND 4226A DUCTILE IRON SERIES 123A, 4123A, 223A AND 4223A STEEL
extreme applications as standard
grundfos INDUSTRY The insurmountable CR extreme applications as standard THE unsurmountable CR A company you can trust Back in 1971 Grundfos shocked the pump world with the introduction of the CR30 - the
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids
AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions
SUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
Goulds 3175. Paper Stock/Process Pump with Patented Intelligent Monitoring
Goulds 3175 Paper Stock/Process Pump with Patented Intelligent Monitoring Goulds Model 3175 Designed to Handle the Toughest Jobs in the Pulp & Paper and Process Industries Capacities to 28,000 GPM (6360
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).