Product End-of-Life Disassembly Instructions

Transcription

1 Product End-of-Life Disassembly Instructions Product Category: Monitors and Displays Marketing Name / Model [List multiple models if applicable.] Name / Model #1: HP LE1711 LCD Monitor Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 1.0 Items Requiring Selective Treatment 1.1 Items listed below are classified as requiring selective treatment. 1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of Item Description Notes items included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 10 sq cm 3 Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 0 2 {Backlight Assembly(CCFL)} 1 Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height 1 (C854 location) External electrical cables and cords 2 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 0 Components and waste containing asbestos 0 EL-MF Page 1 Template Revision A

2 Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description #1:Crossing Screwdriver Description #2:Bushing Screwdriver #1&#2 (HEX5.5MM) Description #3 Description #4 Description #5 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1. Lay the Monitor on the desk, Unlock the 3 screws which fix the stand with the screw driver. 2. Take out the bezel with hand.. 3. Take out the keypad PCBA with hand. 4. Unlock the 4screws which fix the back cover and chassis,then take out the back cover. 5. Unlock the 4 screws which fix the panel. 6. Take out the 2 light wire cover. 7. Remove the light wire connector from Power PCBA. 8. Remove the FFC connector from Panel. 9. Chassis assembly and panel. 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF Page 2 Template Revision A

3 Disassembly Flowchart for HP compaq LE1711 Model Issue Date: Initiator: Andy Wu Action Tool Photo Lay the Monitor on the desk, Unlock the 3 screws which fix the stand with the screw driver Take out the bezel with hand. Take out the keypad PCBA with hand Unlock the 4screws which fix the back cover and chassis,then take out the back cover.

4 Unlock the 4 screws which fix the panel Take out the 2 light wire cover Remove the light wire connector from Power PCBA. Remove the FFC connector from Panel. Chassis assembly and panel

5 Remove the FFC wire from PCBA Unlock the 4 screws which fix the IF board to the chassis,unlock the 2 screws which fix power socket to the chassis #2 Crossing Screw Driver Unlock the 1 screws which fix the IF PCBA Unlock the 4 screws which fix the speaker,then take out the speaker and wires. Chassis

6 Remove the arm rear cover

7 Unlock the four screws which fix the Arm front Unlock the 2 nuts which fix the shaft M6.0 spanner

8 LM170E03-TLHC Lamp Ass y method Step1 : Remove the Screw (2ea) Step2 : Remove the cover shield Step3 : Dismantle the case top(down) Step4 : Dismantle the case top(left/right) Step5 : Separate case top(push the case top because of damages on COF) Step6 : Separate Board Assy Step7 : remove G/Panel Step8 : remove LGP/Optical Sheet Confidential c LG Display Co., Ltd. 6/8/2009 1/2 Step9 : remove lamp wire tapes (left/right) PDF created with pdffactory trial version

9 LM170E03-TLHC Lamp Ass y method Step10 : Separate wires from Cover bottom Step11 : Separate Lamp holder(h) from holder Guide of Cover bottom Step12 : Separate Lamp holde(g) from holder Guide of Cover bottom and pull Lamp assy down. Final : Lamp Assy Confidential c LG Display Co., Ltd. 6/8/2009 2/2 PDF created with pdffactory trial version

10 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :9/16 版 本 :V.1 Method of lamp disassembly on MT170EN01 V.E 1. Original condition 2. Remove the Tapes 9

11 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :10/16 版 本 :V.1 3. Remove the Screw 4. Remove the protect cover (above PCBA) 10

12 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :11/16 版 本 :V.1 5. Remove Top Bezel 6. Remove LCD Cell&PCBA 11

13 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :12/16 版 本 :V.1 7. Remove Mold Frame(Plastic Frame) 8. Remove the Film 12

14 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :13/16 版 本 :V.1 9. Remove the Backcovre 10. Remove BLU (LGP) 13

15 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :14/16 版 本 :V Remove CCFL from Lamp Assy a. Lamp Assy b. Remove tape & Separate wires from Lamp Reflector 14

16 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :15/16 版 本 :V.1 c. Remove Lamp Reflector 15

17 群 創 光 電 股 份 有 限 公 司 廠 商 名 稱 A.6 Ecology of TCO' 03 頁 次 :16/16 版 本 :V.1 d.separate Rubber e. CCFL 16