FCA2031-A1 Connection module (MoNet) Mounting Installation

Transcription

1 FCA2031-A1 Connection module (MoNet) Mounting Installation Building Technologies Division

2 Legal notice Legal notice Technical specifications and availability subject to change without notice Copyright by Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Issued by: Building Technologies Division 8 Fernwood Road Florham Park, NJ Tel Edition: Document ID: 2

3 Table of contents 1 Connection module (MoNet) FCA2031-A Description Views Pin assignments Basic circuit diagram Adjustment elements Technical data FCC Statement...9 3

4 1 Connection module (MoNet) FCA2031-A1 Description 4

5 Connection module (MoNet) FCA2031-A1 Description 1 1 Connection module (MoNet) FCA2031-A1 1.1 Description The connection module (MoNet) FCA2031-A1 combines the degraded mode signals from the SAFEDLINK network and the peripheral data bus signals to the MoNet bus. The connection module (MoNet) is plugged into slot X13 of the main network module (SAFEDLINK) on the PMI & mainboard and connects the Ethernet switch (modular) to the system. The connection module (MoNet) can be used with or without a connected network module (SAFEDLINK). Properties Provides the MoNet bus from the PMI & mainboard to the Ethernet switch (modular) FN2012. Transfers degraded mode signals from the SAFEDLINK network when the network module (SAFEDLINK) is plugged in Transfers system degraded mode signals from the peripheral data bus Supplied via the PMI & mainboard Provides the supply for the Ethernet switch (modular) 5

6 1 Connection module (MoNet) FCA2031-A1 Views 1.2 Views X401 X400 X402 X13 Connection module (MoNet) FCA2031, print view front and back X1 Key Element Des. Function Connector X1 Connector to X13 for the main network module (SAFEDLINK) on PMI & mainboard X13 X400 X401 X402 Socket for the main network module (SAFEDLINK) Connector to the peripheral data bus connection on PMI & mainboard Socket for the peripheral data bus output Socket for the MoNet bus 1.3 Pin assignments Basic circuit diagram The connection module (MoNet) is plugged into the slot for the main network module (SAFEDLINK) on the PMI & mainboard FCM2027. When using the panel in the SAFEDLINK network, the network module (SAFEDLINK) can be plugged into the connection module (MoNet). The connection module (MoNet) generates the MoNet bus from the peripheral data bus and the SAFEDLINK bus of the PMI & mainboard. This is required for transmitting degraded mode signals to the Ethernet switch (modular). The connection module (MoNet) can be used with or without a network module (SAFEDLINK). 6

7 Connection module (MoNet) FCA2031-A1 Pin assignments 1 FCnet/SAFEDLINK X3 Main network module FN2001 X1 Periphery Bus MoNet Bus FCA2031 X402 X401 X400 Periphery Bus X400 SAFEDLINK SAFEDLINK X13 X1 Connection module (MoNet) Serial module SER_OPT1 Serial module SER_OPT2 Degrade network module X13 PMI & Mainboard Basic circuit diagram of the connection module (MoNet) FCA2031-A1 Connector X13 X1 X3 X400 X401 X402 Description Connector for the SAFEDLINK bus Connector on the underside of the panel for X13 Connection terminal on the network module (SAFEDLINK) for FCnet Connector for the peripheral data bus Peripheral data bus output Output from the MoNet bus to the Ethernet switch (modular) FN2012 7

8 1 Connection module (MoNet) FCA2031-A1 Adjustment elements 1.4 Adjustment elements NOTICE Ground fault supervision When using the connection module (MoNet) FCA2031, the S33 'Earth-Fault Phy' switch on the PMI & mainboard must remain OFF. The ground fault detection already takes place via the MoNet bus. 1.5 Technical data Supply Voltage System supply DC 24 V Current Normal operation 0 ma Maximum current 1 ma Supply outputs Peripheral data bus DC V SAFEDLINK output MoNet bus DC V DC V Connections Outputs Sockets for ribbon cable Operating unit Plug-type connection 8

9 FCC Statement 2 2 FCC Statement WARNING Installation and usage of equipment is not in accordance with instructions manual Radiation of radio frequency energy Interference to radio communications Install and use equipment in accordance with instructions manual. Read the following information. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. 9

10 Issued by Building Technologies Division 8 Fernwood Road Florham Park, NJ Tel Technical specifications and availability subject to change without notice. Document ID SAP order no.: A5Q Edition