TOUCHDIAL SPECIFICATION SHEET 12VDC 24VDC OVERVIEW FEATURES & BENEFITS APPROVED LED LUMINAIRES CONTROL SYSTEM

Transcription

1 VDC VDC DRY LOCATION DIMMABLE COLOR-CHANGING ADJUSTABLE KELVIN TOUCHDIAL CONTROL SYSTEM SPECIFICATION SHEET D+ D D+ OVERVIE Diode LED s new TOUCHDIAL zone control system controls Single Color, K-RANGE, and RGB() low voltage luminaires via mobile device and additional TOUCHDIAL controls. This color control system is used for medium to large-scale lighting projects and can be expanded exponentially with the use of the TOUCHDIAL ifi Hub. Now you can easily integrate into your existing ifi network for ultimate lighting authority. This control system is expandable up to 8 zones when using the ifi Mobile App, allowing zones to perform seamlessly in commercial or residential installations. FEATURES & BENEFITS + S S S 0 mm First Diode LED system to control all low voltage fixture types: Single Color (Dimming) K-RANGE DAZZLE RGB, DAZZLE RGB Universal TOUCHDIAL Receiver TOUCHDIAL Receiver is universal and can be installed with all compatible fixtures and all TOUCHDIAL controls. As new TOUCHDIAL Receviers are released, simply repair with existing TOUCHDIAL Receiver(s) Control via Mobile Device with TOUCHDIAL ifi Hub: Supports ios and Android Devices Connect to existing ifi network Control up to 8 zones -Year arranty APPROVED LED LUMINAIRES TOUCHDIAL is compatible with all Diode LED V and VDC constant voltage tape lights and fixtures mm mm Item # Project SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6

2 SPECIFICATIONS TOUCHDIAL Receiver - DI--REC-CV-A Input from Driver: -VDC Constant Voltage Output to Load: -VDC Constant Voltage Max Load: CH x A, CH x 60 (V), CH x 00 (V) Power Failure Memory: Yes D+ D D+ C C R G B TOUCHDIAL Remote Dimmer Zone Control DI--REM-DIM- Input: x CR0 V Battery (Included) Operating Frequency: MHz / 868 MHz Dimming: -00% Signal: Radio Frequency Range: 9 ft. Included Items: A. TOUCHDIAL Remote Dimmer Zone Control B. TOUCHDIAL Dimmer Control Mounting Bracket TOUCHDIAL ifi Hub - DI-IFI--TRMS A. Input from Driver: VDC Constant Voltage Operating Frequency: 868 MHz Connections: LAN OS Compatibility: ios or Android system Range: 00 ft. Included Items: mm mm 8.60 mm 8.60 mm 0 mm 0 mm B. A. A. TOUCHDIAL ifi Hub B. VDC Adapter C. 7 in. CAT Cable B. Environmental Requirements Indoor use only. Ambient Operating Temperature: F to 0 F (0 C to 0 C) Humidity: 8 ~ 90% relative humidity, non-condensing. C. TOUCHDIAL RGB/RGB Zone Remote Control DI--REM-RGB- Input: x AAA.V Batteries (Not Included) Operating Frequency: MHz / 868 MHz Signal: Radio Frequency Range: 9 ft. Included Items: A. A. TOUCHDIAL RGB/RGB Zone Remote Control B. TOUCHDIAL Remote Control Mounting Bracket B. + S S S SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6

3 MECHANICAL DIAGRAMS TOUCHDIAL Receiver - DI--REC-CV-A D+ D D+ mm.09 in mmin. mm 0.9 in. TOUCHDIAL ifi Hub - DI-IFI--TRMS 8.7mm. in. 09.7mm. in. 0.9.mmin. TOUCHDIAL RGB/RGB Zone Remote Control - DI--REM-RGB-.7 in. mm mm 7mm 0.66 in..7in. 0.mm TOUCHDIAL Remote Dimmer Zone Control - DI--REM-DIM mm. in. mm 0.7 in..9 0 mmin mm SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6

4 REMOTE OPERATION TOUCHDIAL RGB/RGB Zone Remote Control DI--REM-RGB- See TOUCHDIAL APPLICATION INSTALLATION GUIDE for detailed mobile device setup and use. Color heel Adjust RGB color mixing. Zone Control Short press to control zones -. Long press to turn individual zone ON/OFF. Power Press to turn all zones ON/OFF. Dynamic Modes Short press switches mode/pauses mode. Long press adjusts speed of dynamic mode. See Dynamic Mode Chart for mode descriptions. S S S + Power Indicator hite Channel Control Short press to turn CH ON/OFF. Long press to adjust brightness. RGB Brightness Press to increase or decrease 8 levels of RGB Brightness. RGB ON/OFF & hite Presets Double tap to turn RGB channels ON/OFF. Short press for variations of white created with RGB color mixing (Cool, Neutral, arm). Useful for applications that don t utilize th channel for RGB applications. DYNAMIC MODE CHART Mode Description Random Fade Random Fade Random Fade Random Fade RGB Fade In/Out 6 RGB Fade In 7 RGB Fade Out 8 RGB Skip 9 Random Fade 0 Random Fade Save Function Save up to colors. Long press to save color. Short press to retreive saved color. TOUCHDIAL Remote Dimmer Zone Control DI--REM-DIM- Master Power ON/OFF Power Indicator Indicator will flash red when data is transmitting. Short press to turn zone ALL ZONES ON. Short press to turn ALL ZONES OFF. Single Zone Dimming Control Short press to turn SINGLE ZONE ON. Long press to increase brightness. Short press to turn SINGLE ZONE OFF. Long press to decrease brightness. SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6

5 D+ D D+ D+ D D+ D+ D D+ D+ D D+ GENERAL DIAGRAM See TOUCHDIAL INSTALLATION GUIDES for detailed connections to driver and luminaire. Max Distance Control to MASTER Receiver: 9 ft. Max # MASTER receivers paired to single zone: Unlimited Max # Controls Paired to Each MASTER Receiver: Unlimited Max Data ire Distance: 00 ft. Max Slaves ired to MASTER ithin 00 ft.: Unlimited 0 ft. 9 ft. 00 ft. + S S S TOUCHDIAL RGB() Remote Control Control up to Zones - RGB() Only ZONE RGB() w/ Dynamic Sync, Solid Color Dimming, K-RANGE (Set to MASTER) MASTER (Set to SLAVE) SLAVE TOUCHDIAL ifi Hub w/ Mobile App Control up to 8 Zones - All Luminaires ZONE RGB() No Dynamic Sync, Solid Color Dimming, K-RANGE (Set to MASTER) MASTER (Set to MASTER) MASTER TOUCHDIAL Dimmer Remote Control Control up to Zones - Solid Color Only SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6

6 SAFETY / ARNINGS / DISCLOSURES. Install in accordance with national and local electrical code regulations.. This product is intended to be installed and serviced by a qualified, licensed electrician.. DO NOT connect directly to high voltage power. Install with a compatible Class constant voltage LED driver (power supply).. Only install compatible V and VDC constant voltage luminaires.. This product is rated for indoor installation and is not protected against moisture. 6. Do not modify product beyond instructions or warranty will be void. ADDITIONAL RESOURCES INSTALLATION GUIDES TOUCHDIAL ifi Hub TOUCHDIAL RGB Remote TOUCHDIAL Dimmer Remote TOUCHDIAL Reciever TOUCHDIAL Application Operation ARRANTY Limited arranty This product has a three () year limited warranty from the date of shipment. This warranty does not include the additional accessories referenced in this specification sheet. Complete warranty details for fixtures and additional accessories are available at under the Tools & Resources tab. For warranty related questions please contact product support. Consumer s Acknowledgment Diode LED stands behind its products when they are used properly and according to our specifications. By purchasing our products, the purchaser agrees and acknowledges that lighting design, configuration and installation is a complex process, wherein seemingly minor factors or changes in layout and infield adjustments can have a significant impact on an entire system. Choosing the correct components is essential. Diode LED is able to work with the original purchaser to make an appropriate product selection to the extent of the limited information that the customer can provide, but it is virtually impossible for Diode LED to design a system that foresees every unknown factor. For this reason, this arranty does not cover problems caused by improper design, configuration or installation issues. Any statement from a Diode LED employee or agent regarding a customer s bill of goods and/or purchase order is NOT an acknowledgment that the products purchased are designed and configured correctly. The purchase agrees and acknowledges that it is the customer s responsibility to adhere strictly to all information contained in the Product Specification Sheets. There is often more than one way to design, configure and layout an LED lighting application properly to achieve the same lighting effect. Diode LED strongly recommends that licensed professionals be used in the design and installation of lighting systems that include Diode LED products. The specifications include important information that a designer and installer should carefully review and strictly follow. Qualified designers and certified and/or licensed installers, with access to the final installation environment, customer goals, and Diode LED product specifications can make the requisite decisions appropriate for a successful finished lighting application. 0 Elemental LED Inc. All rights reserved. Specifications are subject to change without notice. Toll Free: Fax: info@diodeled.com SPEC SHEET TOUCHDIAL CONTROL SYSTEM SS OF 6