Custom Plastic Extrusion Catalog
|
|
- Roland Farmer
- 7 years ago
- Views:
Transcription
1 Custom Plastic Extrusion Catalog TABLE OF CONTENTS WEST & BARKER,INC. Summit Ave., Niles,OH Phone: Fax: WEST & BARKER, INC. is a custom plastic extrusion facility producing a wide variety of profile moldings, trims, and seals. West & Barker is proud to have served the RV Industry with functional and decorative extrusions as well as supplying the Window and Construction Industries for 38 years. Since our founding in 1971, we have strived to consistently produce the highest quality extruded products at competitive prices. We at WEST & BARKER believe excellent service is our most favored trademark. To prove our commitment to the highest standard we implement a stringent Quality Assurance Policy. Our customer rejection rate is less than 1%. To better serve our clientele we maintain consistency and quality standards far above our competition. Bead Welts 2 Bunk Rails 16 Cap Moldings 9 Ceiling/Side Wall Batten 12 Curtain - Door Tracks 13 Cove Gimp 2 Decorative Trims 16 Divider Bars 11 Door Casings 15 Flat Strips 16 F Moldings 8 Gimp 2 Insert Tapes 3 Inside Corner Moldings 10 J Molding 10 L Moldings - Angles 8 Raceway 14 Radius Corner Molding 7 Reverse Cove 2 Screw Covers 3 Shelf Stop 8 Threshold/Plumbing Cover 14 T Moldings - Flexible P.V.C. 6 Beveled Edge T Molding 6 Bull Nose T Molding 6 Double Lip Off Set T Molding 5 Double Lip Serrated Face T Molding 6 Double Lip T Molding 5 T Moldings - Polyethylene 4 Double Lip Off Set T Molding 4 Double Lip T Molding 4 Off Set T Molding 4 T Molding - Rigid P.V.C. 4 Window Fillets 14
2 BEAD WELTS HOLLOW BEAD LEG FN 368-A 5/32" 17/64" FN 129 3/16" 13/32" FN 491 7/32" 1/2" FN 124-A 1/4" 11/32" FN 124 3/8" 3/8" FN 678 5/16" 11/16" FN /32" 17/32" FN 274 3/16" 13/32" FN 274-B 7/32" 7/16" SPONGE SOLID FN 565 7/32" 31/64" FN 185 3/16" 3/8" COVE GIMP FN 110 FN 125 FN 125-A FN 481 REVERSE COVE - POLYETHYLENE (SEMI-RIGID) PN 241 1/2" PN 763 1/2" PN 131 7/16" REVERSE COVE - FLEXIBLE P.V.C. FN 130 7/16" FN 225 3/4" FN 285 3/4" 2
3 INSERT TAPES FN 126-B 5/8" FN 126 3/4" FN 386-A 1" FN /2" FE " PN 156 1/2" PN 156-A 9/16" PN 123-B 5/8" PN 123-A 3/4" PN 289 1" PN 123 1" FE /16" FE /4" FE 1012 SCREW COVERS RN 526 5/8" RN /64" RN 277-A 37/64" RN /64" RN /64" RN /64" RN /32" 3
4 DOUBLE LIP T MOLDING - POLYETHYLENE (SEMI-RIGID) PN 276-A 1/2" PN 276-C 9/16" PN 276 5/8" PN /16" PN 504-A 3/4" PN 504-C 13/16" PN 504-E 7/8" PN 474-A 15/16" PN 474 1" PN 324-B 1 1/16" PN /8" PN 324-A 1 1/8" T MOLDING - POLYETHYLENE (SEMI-RIGID) PN 390-A 3/8" PN 390 1/2" PN 390-B 9/16" PN 228-G 5/8" PN 228-C 21/32" PN 228-D 11/16" PN 492-A 45/64" PN 228-A 3/4" PN 492 3/4" PN 228-B 49/64" PN /16" PN 228-F 55/64" PN 332-C 7/8" PN 332-A 15/16" PN 332-B 1" PN /8" PN /8" PN 458-A 1 1/4" OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID) PN 908 1" PN 392-A 1 1/8" PN /4" DOUBLE LIP OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID) PN /8" *Embossing Available on all Polyethylene T-Moldings DOUBLE LIP SERRATED FACE T MOLDING - FLEXIBLE P.V.C. FN /32" FN 638 9/16" FN 640 5/8" OFF SET T MOLDINGS - FLEXIBLE P.V.C. FN 569-A 1 1/8" FN /4" 4
5 DOUBLE LIP T MOLDINGS - FLEXIBLE P.V.C. COVERAGE AREA FN 754-A 1/2" FN 156-A 1/2" FN /2" FN 156-B 9/16" FN /32" FN 156 5/8" COVERAGE AREA FN 754 5/8" FN 799 3/4" FN 932 3/4" FN /16" FN 836 1" FN 836-A 1 1/8" T MOLDINGS - FLEXIBLE P.V.C. COVERAGE AREA COVERAGE AREA FN 643-D 3/8" FN /16" FN 643-C 1/2" FN 643-A 9/16" FN 957 5/8" FN 643-F 5/8" FN 957-A 11/16" FN 643-B 3/4" FN /16" FN /4" FN 871-A 1 3/4" DOUBLE LIP OFF SET T MOLDING - FLEXIBLE P.V.C. COVERAGE AREA FN /8" T MOLDING - RIGID P.V.C. RN 757 1/8" RN /16" 5
6 BULL NOSE T MOLDING - FLEXIBLE P.V.C. FD 1206 COVERAGE AREA 1 1/4" FN 404 FN 795 (Center Stem) COVERAGE AREA 1 1/16" BEVELED EDGE T MOLDING - FLEXIBLE P.V.C. FD /16" FD /16" FD /16" (Center Stem) FD /4" FD 281 5/8" FD 281-A 3/4" FD 281-B 11/16" CONTOURED or SERRATED MOLDING - FLEXIBLE P.V.C. FN /16" 5-Bump FN 705-A 1 1/8" 5-Bump FN 697 5/8" 3-Bump FN 697-A 13/16" 3-Bump FN /16" 1-Bump FN /32" FN 787 1/2" 6
7 RADIUS CORNER MOLDINGS RN 522 9/64" RN 233 5/32" RN 864 1/8" RN 864-A 9/64" RN 444-A 1.4" RN " RN 444-C 1.7" RN 524 AL-ZP Plastic Retainer Aluminum Retainer RN 1187 Radius Bull Nose Molding 7
8 RADIUS F MOLDING - OUTSIDE CORNER FOR PANELING RN 456 1/8" 3mil RN 380-B 1/8" 3mil RN 380 5/32" 4mil RN /32" 4mil RN 456-A 3/16" 4.7mil F MOLDING - OUTSIDE CORNER FOR PANELING RN 838-A 7/64" RN 239-A 1/8" RN 239 5/32" RN 838 5/32" RN 528-A 7/32" RN 528 1/4" RN 326 1/4" RN 326-A 3/8" RN " RADIUS F MOLDING - EXTENDED LEG FOR PANELING RN 378 3/16" RN 378-A 5/32" RN 378-B 1/8" RN /32" RN 484 1/4" SHELF TOP FOR PANELING RN /8" RN 630 1/2" L MOLDING - ANGLES ALL ANGLES AT 90 - WE CAN CHANGE ANGLES UPON REQUEST LEG RN /8" x 1/4" RN 102 1/8" x 1 1/4" RN 133 3/16" x 1 1/2" RN 355 1/4" x 3/8" RN 1119-A 9/32" x 1/2" RN 809 1/2" x 1/2" RN 648 9/16" x 1 3/8" RN /32" x 19/32" RN /32" x 21/32" LEG RN 382-A 1" x 1" RN /64" X 1 1/2" RN /8" x 23/32" RN /32" x 17/32" RN /32" x 7/8" RN 255 3/4" x 3/4" RN 255-B 7/8" x 7/8" RN /16" X 1 7/16" 8
9 CAP MOLDING - RIGID P.V.C. GAP LEG RN 337 3/32" 13/32" RN 337-B 3/32" 3/8" RN 316 1/8" 7/32" RN 337-A 1/8" 1/2" RN 840 1/8" 11/32" RN 839 1/8" 9/32" RN 521 5/32" 25/64" RN 584-A 5/32" 1/4" RN 840-A 5/32" 3/8" RN /64" 1" RN 840-B 3/16" 11/32" RN 467 1/4" 3/4" RN /64" 25/64" RN /64" 9/16" RN 461 5/16" 3/8" RN 461-A 3/8" 13/32" RN 585 3/8" 11/32" RN 497 1/2" 9/32" RN 842 1/2" 33/64" RN /2" 5/16" RN 586 5/8" 21/64" RN 586-A 11/16" 3/8" RN 587 3/4" 13/32" RN 841 3/4" 21/64" RN 454-B 13/16" 11/32" RN /64" 41/64" RN 398 7/8" 1/8" & 1/4" RN 179 7/8" 1/4" RN 231-A 7/8" 19/64" GAP LEG RN 234-C 7/8" 3/8" RN 454 7/8" 3/8" RN 455-C 7/8" 27/64" RN 231-B 15/16" 3/8" RN 454-A 15/16" 25/64" RN 455-B 15/16" 15/32" RN 234-B 63/64" 3/8" RN 231 1" 3/8" RN 234-E 1" 21/64" RN 455-D 1" 1/2" RN /16" 1/2" RN 234-A 1 1/16" 3/8" RN 455-A 1 1/16" 1/2" RN /8" 3/8" RN 234-D 1 1/8" 21/64" RN /4" 3/8" RN /16" 3/8" RN 588-A 1 3/8" 3/8" RN 588-B 1 1/2" 11/32" RN 592-D 1 1/2" 7/16" RN 592-C 1 5/8" 15/32" RN 592-A 1 3/4" 1/2" RN /8" 35/64" RN 592-B 2" 19/32" RN /4" 1/2" RN /8" 1 35/64" RN 1154-A 2 3/8" 9/16" RN 418-A 2 7/8" 1 3/8" RN /4" 1 9/16" RN /16" 1 9/16" CAP MOLDING - FLEXIBLE P.V.C. GAP LEG FN 941 1/8" 1/2" FN /64" 3/8" FN /32" 45/64" FN 649 3/16" 5/16" FN 649-A 1/4" 11/32" 9
10 J MOLDING - END CAP - RIGID P.V.C. GAP GAP RN 446-A 1/16" RN 446-B 7/64" RN 267-D 1/8" RN 446 1/8" RN 267-C 5/32" RN 267 3/16" RN 410 3/16" RN 604 1/4" RN 356 1/2" RN 356 -B 9/16" RN 482 7/8" J MOLDING - END CAP - POLYETHYLENE (SEMI-RIGID) GAP PN 139 5/32" J MOLDING - END CAP - FLEXIBLE P.V.C. GAP FN 309 1/16" FN 576 1/8" INSIDE CORNER MOLDINGS RN 486 1/4" RN 607 1/8" RN 821 5/32" RN 607 1/8" 10
11 SINGLE DIVIDER BARS - RIGID P.V.C. RN 952 7/64" RN 437 1/8" RN 599 1/8" RN 600 9/64" RN /8" RN 441 9/64" DIVIDER BARS - RIGID P.V.C. RN 1038-A 5/64" RN /32" RN 515 1/8" RN 493 5/32" RN 515-A 5/32" RN /32" RN 790 1/4" RN 493-A.165" RN 733 3/16" RN 260 3/16" RN 633 1/4" RN 986 5/16" RN /32" RN 830-A 7/16" RN 442 1/16" RN 752 1/4" RN 752-A 17/64" RN /8" RADIUS DIVIDER BAR - RIGID P.V.C. RN 363 3/16" ANGLED DIVIDER BAR - RIGID P.V.C. RN 121-H 5/32" DIVIDER BAR - FLEXIBLE P.V.C. FN 272 3/32" FN 658 1/8" 11
12 CEILING / SIDEWALL BATTEN RN 323 1" Ceiling Batten RN 570 1" Ceiling Batten RN 570-A 1" Ceiling Batten RN " Ceiling Batten RN /16" Ceiling Batten RN /2" Ceiling Batten RN /2" Double Lip Batten RN 391 RN 391-X RN 407 RN 953 Ceiling Batten Retainer Ceiling Batten Retainer - Ext. Lock Narrow Ceiling Batten Retainer (Narrow Base) Batten Retainer RN /2" Off Set Ceiling Batten RN 541 Off Set Ceiling Batten Retainer RN 925 1" Ceiling Batten RN 925-A 1" Ceiling Batten RN " Ceiling Batten - Ext. Lock RN 944 RN 926 Ceiling Batten Retainer (Narrow Base) Ceiling Batten Retainer RN 945 Ceiling Batten Retainer Ext. Lock RN 1148 Flat Ceiling Batten RN 1147-A Ceiling Batten RN 833 Ceiling Batten Retainer RN 1149 Ceiling Batten Retainer RN 832 Ceiling Batten 12
13 CURTAIN - DOOR TRACKS RN 383 RN 690 RN 690-A Curtain Track Curtain Track Curtain Track RN 436 RN 995 Curtain Track Curtain Track RN 465 Door Track RN 466 Door Track RN 469 Curtain Track RN 434 RN 468 Curtain Track Door Track RN 621 RN 672 Curtain Track Curtain Track 13
14 THRESHOLD / PLUMBING COVER RN /4" Threshold Cover RN /64" Threshold Cover RN /4" Plumbing Cover RACEWAY RN 685 Wire Raceway Base RN 739 Wire Raceway Base RN 1058 Wire Raceway Base for RN 1057 RN 686 Wire Raceway Cover for RN 685 and RN 739 RN 1057 Wire Raceway Cover for RN 1058 RN 990 RN 990-A Chassis Raceway Chassis Raceway (No Divider) WINDOW FILLETS RN 525 2" Window Fillet RN 490 3" Window Fillet RN /2" Window Fillet RN " Window Fillet 14
15 DOOR CASINGS RN 116 Door Casing RN 151 Door Casing RN /8" Door Casing RN 671 Door Garnish RN 671-A Door Garnish RN 938 Entrance Door Garnish RN 996-B 1 1/2" Door Jamb Casing RN 948-A RN /4" Door Jamb Casing 1 7/8" Door Jamb Casing RN /8" Door Jamb Casing RN 948 2" Door Jamb Casing RN 351 Door Casing RN 949 Door Stop RN 1106 Door Stop RN 1199-A RN /2" Door Stop 1 1/4" Door Stop 15
16 BUNK RAILS RN 664-T Bunk Slide (with Double Face Tape) FLAT STRIPS - RIGID P.V.C. RN 673 5/8" RN 447 5/8" RN 673-A.680" RN 956 5/16" RN /4" RN 991 7/8" RN 372 1" RN 372-A 1 1/8" RN " RN /2" RN 1011-A 2" RN /4" RN /4" RN /4" FLAT STRIPS - FLEXIBLE P.V.C. FN 985 1/2" FN 502 3/4" FN /2" DECORATIVE TRIMS RN 1023 RN 1024 USAGE Mirror Frame Mirror Frame Insert RN 979 RN 980 Valance Molding Valance Molding Insert 16
17 WOOD TEXTURES (not available on all extrusions, please contact a representative for more information) autumn-haze autumn-oak frosted-maple golden-cherry greenbriar-oak merit-oak mount-vernon-cherry pickeld-ash praxis oak washed-maple windsor-walnut winford-oak CHROME and GOLD also available (not pictured) 17
Retail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationSECTION 08560 SERIES 1500 VINYL PATIO DOORS
SERIES 1500 VINYL PATIO DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Patio Doors 1.2 RELATED SECTIONS A. Section 05450: Cold Formed Metal Framing. B. Section 06100: Rough Carpentry. C. Section 06200: Finish
More informationIMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
More informationPremier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
More informationPoint of Purchase Extrusions
Point of Purchase Extrusions Retail Displays Sign & Literature Holders Data Strips & Label Holders Shelf Edging, Shelf Caps & Shelf Talkers Ceiling Displays & Banner Hangers Display & Product Merchandising
More informationREMOVE AND REPLACE AIR CONDITIONER. 170 Popular Dodge REMOVAL: AIR CONDITIONING Section 4 Page 1
Section 4 Page 1 REMOVE AND REPLACE AIR CONDITIONER 170 Popular Dodge REMOVAL: 1. Turn main breaker to the OFF position. 2. Unplug Air conditioner unit. 3. Remove cabinet doors on either side of Air conditioner.
More informationBrick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
More informationInsulView Window Installation Instructions
InsulView Window Installation Instructions 1. The entire building is normally sheeted with the 2" 2 ½ OR 3 wall panel and the windows installed at a later time. A window retrofit of an existing building
More informationILLUSION FRAMELESS SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
PREPARATION Approximate Installation Time: Tools Required for Installation: 60 minutes Hacksaw Electric Drill 3/16 Masonry Bit Pencil/Felt tip pen Safety Glasses Measuring Tape Masking Tape Standard Screw
More informationPANELIZED HOME INSTALLATION GUIDELINE
PANELIZED HOME INSTALLATION GUIDELINE A typical home package will be constructed of Snap-N-Lock Insulated Panels clad with steel skins. 4" panels will be used for the walls, and 6" panels for the roof.
More informationHOW TO INSTALL A BEAUTIFUL NEW KITCHEN
HOW TO INSTALL A BEAUTIFUL NEW KITCHEN Easy to follow step-by-step kitchen cabinet installation TOOL AND MATERIAL LIST Hammer Pry bar Screwdriver Phillips Flathead Level Tape measure Pencil Straight edge
More informationPanel Track Installation Guide
Panel Track Installation Guide We make it easy! BTG 493361 EN_0510 Before starting Your new Blinds To Go panel track is custom made to your specifications from the finest materials available. To ensure
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More information1 Door Tall Unit ASSEMBLY GUIDE. Page 1 of 9. WARNING: Contains small parts, keep out of reach of children.
Page 1 of 9 ASSEMBLY GUIDE 1 Door Tall Unit IMPORTANT Before Commencing Assembly: Read all instructions COMPLETELY Ensure all listed parts are present If any parts are missing from Parts List 1, please
More informationImportant Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
More informationWINDOW REPAIR MANUAL & REFERENCE GUIDE
WINDOW REPAIR MANUAL & REFERENCE GUIDE TABLE OF CONTENTS DOUBLE HUNG & SINGLE HUNG PARTS 4-5 CASEMENT PARTS 6 SCREEN PARTS 7-8 HOW TO REMOVE TILT-IN SASH 9 HOW TO REMOVE A BALANCE 10 HOW TO INSTALL BALANCE
More informationPart Number Description D" x W" x H" ESSIX, Bed, Full, 3-Piece Wood Deck, Uses Mattress 56 89 38. Sized 54" x 80" - Not Included
Extruded aluminum posts Material :Y Veneer plywood or L Laminate headboard/footboard with matching PVC edge band One-piece steel side rails: black 7 deck heights with steel pin channel Open Market Tip:
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationHALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
More informationH-Stud Area Separation Wall System
12 TH EDITION 09 21 16.33/NGC H-Stud Area Separation Wall System 09 21 16.33 139 H-STUD AREA SEPARATION WALL SYSTEM The fire-protection of gypsum-based Area Separation Walls is demonstrated in dramatic
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationBarewood Octagon and Elongated Windows Installation Instructions
Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationHeavy Glass Frameless Shower Door With Return Panel
202 Anderson Ave., elvue, KS 66407 Phone: 800-669-9867 Fax: 800-393-6699 www.onyxcollection.com Heavy Glass Frameless Shower Door With Return Panel Full Showers with Return ench Seat with Return FRLSDRPL-0116
More informationDoor Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
More informationSun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
More informationCLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
More informationAC-3200 ALUMINUM PLATE SYSTEM (DRY JOINT)
ALUMINUM PLATE SYSTEM (DRY JOINT) C D E G P J L A H M B Q F A B C D E F G H J K L M N P Q R HORIZONTAL JOINT DETAIL VERTICAL JOINT DETAIL COPING DETAIL (1) COPING DETAIL (2) COPING DETAIL (3) OUTSIDE CORNER
More informationCLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
More informationInstalling Window and Door Mouldings
Installing Window and Door Mouldings About Window and Door Mouldings The trim around windows and doors greatly influences the look and style of your interior. They also bridge the gaps and cover spaces
More informationVERSARAIL ALUMINUM STAIR RAILING INSTALLATION INSTRUCTIONS. Owner's Manual. Version. www.barretteoutdoorliving.com. Models
Models VERSARAIL ALUMINUM STAIR RAILING 73013153 INSTALLATION INSTRUCTIONS 73013154 73013155 73013156 Owner's Manual Version 1.0 VERSASTAIR_BOM V1 3/2012 www.barretteoutdoorliving.com VERSARAIL ALUMINUM
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationGlossary. 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes
Glossary 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes 1/4 1/2 1/4 - Configuration of a vent-fixed-vent (xox) window in which the vents
More informationINSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW
Vinyl Windows and Doors Manufactured by Pella Corporation INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW Lea las instrucciones en español en el reverso.
More informationCLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
More informationAll-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
More informationMGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
More informationInformation Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
More informationGrand Mesa Plus LAMINATE - WIRE BRUSHED. GAGVGM81012A Prairie. GAGVGM80012NA Colorado. GAGVGM84012A Pecan Rustic. GAGVGM85012A Saddle Walnut
MARCH 2015 Grand Mesa Plus LAMINATE - WIRE BRUSHED Specifications 12.3mm 6.5 wide x 47-13/16 long 19.42 sf/ctn 48 ctn/plt Triple Plate Embossing Wire Brushed Texture Micro-Bevel & Waxed Edges Warranty
More informationThe WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 Ver. 1.1 Page 2 of 74 Contents Overview Page 5 Objective Page 5 Scope Page 5 Opening Preparation Page 7 Step P1 Preliminary Check
More informationVISCO WEATHER SEAL PRODUCTS. VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com
VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com INTRODUCTION Visco Produces Industry-Leading Weather Seal Products Visco Weather Seal Products has 50
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationINSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
More informationINSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
More informationDIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More informationWINDOW PANNING AND TRIMS
OCTOBER, 2010 PANNING AND TRIMS GENERAL INFORMATION 1 EXTERIOR PANNING Panning is primarily used to cover the perimeters of existing building openings prior to the installation of replacement windows.
More informationHorizontal Mini Blinds Installation Guide
Horizontal Mini Blinds Installation Guide We make it easy! BTG 468298 EN_ rev0614 For more safety information: 1-866-662-0666 or.www.healthcanada.gc.ca/blindcords Before starting Your new Blinds To Go
More informationCORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS
CORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS D E F Y I N G C O N V E N T I O N Congratulations on your new Corner Fridge Your new corner fridge may have different functions
More information!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
More informationCertainTeed. Shaftliner For A rea Separation Firewalls
CertainTeed Shaftliner For A rea Separation Firewalls M2Tech Shaftliner Type X for Area Separation M2Tech Shaftliner is a specially formulated product for applications where enhanced mold resistance is
More informationCLAIM FORM APPENDIX. I. Photographs Identifying The Windows
CLAIM FORM APPENDIX I. Photographs Identifying The Windows The Settlement provides compensation for MIWD Products that are glazed with Glazing Tape and were manufactured or sold between July 1, 2000 and
More informationInstallation Details. D1 General D2 Walls D3 Ceilings D4 Reference. D Installation Details
D Installation Details D1 General D2 Walls D3 Ceilings D4 Reference D Installation Details D Contents D1 General Installation and Fastening Sequence for Steel Studs D1.1 Fastener Selection D1.3 D2 Walls
More informationPERFORMANCE TEST REPORT. Rendered to: TREMCO INCORPORATED. SERIES/MODEL: Proglaze ETA PRODUCT TYPE: Engineered Transition Assembly
PERFORMANCE TEST REPORT Rendered to: TREMCO INCORPORATED SERIES/MODEL: Proglaze ETA PRODUCT TYPE: Engineered Transition Assembly Title Summary of Results Air Infiltration
More informationHybrid Display System
1.800.487.7944 Hyperlite Standard Lengths and Extrusion 39" 23" Hyperlite 11.5" HP3R5-46 HP3R5-39 HP3R5-23 Extrusion EZ6-A1F 23" EZ6-A2F EZ6-A3F EZ6-A4F Hyperlite Curves 28 3/4" radius sections: 51 3/4"
More informationFig. 2 WALL-TO-WALL PANEL CONNECTIONS CORNER WALL CONNECTION
SIPS SCREWS WITH MINIMUM 1" PENETRATION IN WOOD MEMBER IN SIP WALL PANEL CONNECTED TO @ 24" O.C. MAXIMUM OUTSIDE SKIN EACH SIDE OF FRAMING TYP. AS RECOMMENDED BY FOAM CORE AS EACH SIDE OF FRAMING TYP.
More information4 5/16 Subframe Installation
4 5/16 Subframe Installation The subframe system is a great installation tool for installing windows in masonry conditions. Typically subframes are used in masonry openings so that windows can be anchored
More informationResidential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
More informationDESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS
SECTION INCLUDES Metal Windows Vinyl/Aluminum Clad Wood Windows Solid Fiberglass and Vinyl Windows Wood Windows (Historic Preservation only) RELATED SECTIONS 02 83 00 Lead Paint Remediation 06 10 00 Rough
More informationHistoric Preservation Certification Application Part 2 343-345 Main Street West South Haven, Vermont NPS Project No. 12345
Exterior Features 1 site and drainage 2 foundation 3 wood siding and trim 4 exterior doors 5 windows / storm windows 6 porches front and rear 7 chimneys 8 roofing Interior Features 9 frame 10 basement
More informationAlpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
More informationGarden Window. Montecito Series Vinyl Garden Window Architectural Manual
Montecito Series Vinyl The offers the outstanding insulating properties, low maintenance, and contemporary aesthetic appeal only vinyl can provide. Available in White and Tan homogenous window frames,
More informationSeries 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX Fixed Series 3502 retains an AAMA
More informationTundra Series Windows January 2016
Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing
More information300mm. 2mm MIN GAP. PLACE 100mm X 100mm. SO THAT IT IS 38mm INTO
INSTALL PEEL & STICK (P&S) GUSSETS WITH PRIMER AS PER MANUFACTURERS INSTRUCTIONS 2mm MIN GAP IN SHEATHING STEP 1 PLACE 100mm X 100mm PIECE OF P&S IN CORNER SO THAT IT IS 38mm INTO THE OPENING EACH WAY
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationI N F I N I T R I M V I N Y L - L A M I N A T E D I N T E R I O R T R I M
I N F I N I T R I M V I N Y L - L A M I N A T E D I N T E R I O R T R I M The InfiniTrim System is specifically designed to provide interior trim for both standard and specialty shaped Great Lakes windows
More informationLinea Weatherboard DIRECT FIX CONCRETE SLAB AND SOFFIT FIGURE 1
Top plate Stud Soffit lining 45mm min nog Fix scotia bead Building underlay/james Hardie rigid air barrier Soffit Detail Building underlay/james Hardie rigid air barrier Bottom plate 25mm wide cant strip.
More informationCeiling Mounted Folding Attic Ladders Installation Instructions
Ceiling Mounted Folding Attic Ladders Installation Instructions WARNING Before you start installing your new Louisville Ceiling Mounted Folding Attic Ladder, you must read and understand the following:
More informationGlass partitions SFB 3074
Glass partitions SFB 3074 Our facade system SFB 3074 is innovative in its design. We have made a great effort to obtain an energy effective system. The future requirements regarding the economical use
More informationQWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS
QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationAstragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.
Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient
More informationWINDOW INSTALLATION GUIDE
WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information
More informationWELCOME. Recommended Window Installation. 1.5 credits Minnesota Department of Labor and Industry
WELCOME Recommended Window 1.5 credits Minnesota Department of Labor and Industry In accordance with the Department of Labor and Industry s statute 326.0981, Subd. 11, This educational offering is recognized
More informationWe urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
More informationHow To Test For An Architectural Test
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: CORAL ARCHITECTURAL PRODUCTS SERIES/MODEL: PW 256 with Door Openings PRODUCT TYPE: Aluminum Impact Resistant Curtain Wall System
More information1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS
By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool
More informationINSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions
More informationAn ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
More informationMarch 14, 2007. Installation of Bay, Bow and Garden Windows
March 14, 2007 Re: Installation of Bay, Bow and Garden Windows Attached are the Atrium Companies, Inc recommendation for the installation of bay, bow and garden windows. These instructions were developed
More informationSchluter -KERDI-BOARD Substrate, building panel, bonded waterproofing
Schluter -KERDI-BOARD Substrate, building panel, bonded waterproofing Schluter -KERDI-BOARD The universal substrate for tiles Flat. Level. Plumb. Square. No matter the quality, cost, or extravagance of
More informationWe urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationmajestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base
majestic install ation guide barcelona three sided enclosure 24mm surface mounted wall channels and underframe to base These Instructions are for a left and right handed unit. The diagrams show a left
More informationThe WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 2 of 60 Contents Overview 5 Objective 5 Scope 5 Opening Preparation 7 Step P1 Preliminary Check 8 Step P2 Cut the Underlay 9 Step
More informationCall for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
More informationReplacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin
Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product
More informationCoat Racks Floor Racks Hooks Hangers Hook Panels Wardrobes
Coat Racks Floor Racks Hooks Hangers Hook s Wardrobes Phone: 913-281-4555 Fax: 913-281-4554 Website: www.emcospi.com E-mail: info@emcospi.com Aluminum & Hardwood Coat Racks Whenever large groups gather
More informationBasic Spring Motor Roller Shades
Comprehensive Roller Shade Installation Guide Basic Spring Motor Roller Shades ATTENTION!!! READ CAREFULLY! This shade has a reliable long-lasting Spring Motor. The Spring Motor must have proper tension
More informationHP Laser Jet 4200/4240/4250/4300/4350 Swing Plate
HP Laser Jet 4200/4240/4250/4300/4350 Swing Plate 1 Swing Plate Assembly-RM1-0043 1 Swing Plate Kit-5851-2766 (RM1-0043 plus RM1-1091 gear) CAUTION: Fuser may be hot. Turn off printer, unplug it and allow
More information10 ModLite Minimal (Option 4) Trade Show Display Booth
This Display provides a modern, slick, and stylish appearance. The extrusion based exhibit features a NEW velcro-applied fabric graphic. Headers and wings are available in UV printed graphics or frosted
More informationAndersen Clad Inswing Entry Doors (2001 to Present)
Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts
More informationIn Stock Selection. Interior Doors
Scherer Bros. Lumber Co. Millwork Solutions Doors In Stock Selection Raised Panel Doors The style and warmth of fine wood make statements of quality and traditional elegance. Scherer Bros. carries the
More informationWINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING
WINDOW INSTALLATION GUIDE FOR NEW CONSTRUCTION - WOOD FRAMING IMPORTANT NOTICES AND INFORMATION Read these instructions in their entirety prior to installing windows. Any local building code requirements
More informationDRY FREIGHT TRUCK BODIES
DRY FREIGHT TRUCK BODIES Options Shown BODIES THAT MOVE BUS Give your business the competitive edge with Morgan s industry- Options Shown INDUSTRY FACT: More businesses run Morgan truck bodies than any
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationBOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.
BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel
More informationINSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR
INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing
More informationInstallation Window Building In Details
Installation Window Building In Details INSTALLATION Photo courtesy of Rowe Aluminium DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 INSTALLATION Installation Replaces: Scale: NOT TO SCALE Vantage snap-on couplers
More information