Water pumps. SQ2 3 / SP1 4 / SP2 4 Complete pump package

Transcription

1 Water pumps Complete pump packages for water wells. The only thing to be added is the electrical cable and the hose between the top of the well and the house. SQ2 3 / SP1 4 / SP2 4 Complete pump package SP1A-920 SP1A-930 SP1A-940 SP1A-1440 SP1A-1450 SP1A-1460 SP1A-1860 SP1A-1870 SP1A-1880 SP1A-2170 SP1A-2180 SP1A-2190 SP1A SP1A SP1A SP1A SP1A SP1A SP1A SP1A SP1A SP2A-920 SP2A-930 SP2A-940 SP2A-1340 SP2A-1350 SP2A-1360 SP2A-1860 SP2A-1870 SP2A-1880 SP2A-2380 SP2A-2390 SP2A SP2A SP2A SP2A SP2A SP2A SP2A SP2A SP2A SP2A SP2A SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ SQ m SP1 package gives a pressure for at least 3 bar and a max. flow of 24 litres per minute. SP2 package gives a pressure for at least 3 bar and a max. flow of 44 litres per minute. SQ2 package gives a pressure for at least 3 bar and a max. flow of 55 litres per minute. 31

2 Submersible pumps, Wellpump Submersible multistage pumps for pumping groundwater. These pumps are of a very robust design, easy to handle and to install and made in a noncorrodible material. CE-approved. 3-PHASE, Qmax 40 l/min, Serie AS SUBMERSIBLE PUMP 0.37 W AS SUBMERSIBLE PUMP 0.37 W AS SUBMERSIBLE PUMP 0.55 W AS SUBMERSIBLE PUMP 0.55 W AS SUBMERSIBLE PUMP 0.75 W AS SUBMERSIBLE PUMP 1.1 W AS54 3-PHASE, Qmax 48 l/min, Serie B SUBMERSIBLE PUMP 0.37 kw B SUBMERSIBLE PUMP 0.55 kw B SUBMERSIBLE PUMP 0.75 kw B SUBMERSIBLE PUMP 1.1 kw B SUBMERSIBLE PUMP 1.5 kw B SUBMERSIBLE PUMP 2.2 kw B47 Submersible pumps, Grundfos Grundfos has a wide range of pumps for a number of different applications. The popular 3 SQ-serie are suitable for domestic water supplys as well as for industrial applications. Grundfos pumps are of robust design incorporating hard wearing materials to ensure a long life, and represent exceptional value for money. The pumps are easy to install and have a high efficiency. 1-PHASE, Pumps for deep boreholes SQ2-35 PUMP 0.70 kw 1* V SQ2-55 PUMP 0.70 kw 1* V SQ2-70 PUMP 1.15 kw 1* V SQ2-85 PUMP 1.15 kw 1* V SQ2-100 PUMP 1.68 kw 1* V SQ2-115 PUMP 1.85 kw 1* V 3-PHASE, Pumps for deep boreholes 08001K09 SP1A-09 PUMP 0.37KW 3* V 08001K14 SP1A-14 PUMP 0.37KW 3* V 08001K18 SP1A-18 PUMP 0.37KW 3* V 08001K21 SP1A-21 PUMP 0.37KW 3* V 08001K28 SP1A-28 PUMP 0.37KW 3* V 08001K36 SP1A-36 PUMP 0.37KW 3* V 09001K K K K K K33 SP2A-09 PUMP 0.55KW 3* V SP2A-13 PUMP 0.55KW 3* V SP2A-18 PUMP 0.55KW 3* V SP2A-23 PUMP 0.55KW 3* V SP2A-28 PUMP 0.55KW 3* V SP2A-33 PUMP 0.55KW 3* V 32

3 A SEALING PACKER 4 1/2 A SEALING PACKER 5 1/2 Hydro pro Membran Pressure tank HYDROPRO MEMBRANE TANK 50LT V HYDROPRO MEMBRANE TANK 80LT V HYDROPRO MEMBRANE TANK 105LT V HYDROPRO MEMBRANE TANK 250LT V HYDROPRO MEMBRANE TANK 400LT V Vatette VATETTE PE SUPPORT CAGE 32X2, VATETTE PE STRAIGHT 32X1 OD VATETTE PE STRAIGHT 32X1 1/4 OD Fitting kit FITTING KIT HYDROPRO FITTING KIT HYDROPRO Single adapter SINGLE ADAPTER R SINGLE ADAPTER R 50 Shrinkage set SHRINKAGE BLUE CAGE mm SHRINKAGE SET F-CABLE mm2 Electrical cable, type Draka, metergoods D CABLE REVE,L=500 M4X1,5 P/M D CABLE REVE,L=500 M3X2,5 P/M PEM-Hose A PEM-HOSE 32x26, 2PN10 S2100 WELLMATE FIBREGLASS TANK STAINLESS STEEL WIRE 3mm WIRE LOCK 3mm Well Caps A WELL CAP FOR SUBM. PUMP mm A1645 A1646 WELL CAP, NON CORRUSION 110-1m WELL CAP, NON CORRUSION mm A WINTER DRAIN PE32 33

4 Water analysis TLC - Temperature, Level, Conductivity meter This meter is ideal for profiling conductivity and/or temperature in wells or open water and for salt-water intrusion investigations. The TLC uses an intelligent conductivity sensor with platinum electrodes. The sensor is attached to a flat-tape. Lengths up to, mounted on reels. Conductivity and temperature measurements are displayed on a rotating LCD screen on the face of the reel. A light and buzzer are briefly activated when the zero point of the probe enters water. Specifications: Conductivity: µs with an accuracy of 2 % between ,000 µs Temperature: -15 C to +50 C with an accuracy of +/- 0.3 C Automatic shut-off after 8 min. Standard 9 volt batteries provide up to 90 hours of use. Marked every 1/100 ft or every millimeter. S TEMP/LEVEL/COND METER S TEMP/LEVEL/COND METER 34 Multi-meters and accessories. These CE-approved instruments are specially designed for the purpose of analytic measurements under field conditions or in a demanding laboratory environment. A selection: WTW ph330i, this robust, waterproof ph/mv/tmeter with built-in data logger, real time clock and GLP-supporting functions is supplied inclusive ph-electrode. WTW 315i, a robust, low-energy consumption EC/T-meter in dust- and waterproof housing is provided inclusive EC-electrode (4-electrode measuring technology) with integrated temperature sensor (K=0.475 cm-1). S , P2 S , P2 S , P2 Sounding devices with acoustic/ light signal The devices are equipped with a probe, which is connected to a measuring tape with centimeter graduations. When the probe touches a conductive liquid, a clear acoustic and light signal is produced. If the cable is lifted a little, the signal will stop. At this stage the user can read the depth directly from the measuring tape. Probe P2: 10 x 38 mm Probe P6: 12.7 x 220 mm S , P6 S , P6 S , P6 S , P6 S , P6

5