WINDOWS MOBILE OS INSTALLATION GUIDE

Transcription

1 MOBILE EXTENSION CLIENT (MXC) WINDOWS MOBILE OS INSTALLATION GUIDE October 2012 * P11* P11-A 2012 Motorola Solutions, Inc. All rights reserved

2 Copyrights The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola Motorola Solutions, Inc. All Rights Reserved. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola Solutions, Inc. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product. Disclaimer Please note that certain features, facilities and capabilities described in this document may not be applicable to or licensed for use on a particular system, or may be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola contact for further information. Trademarks MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) directive The European Union's WEEE directive requires that products sold into EU countries must have the crossed out trashbin label on the product (or the package in some cases). As defined by the WEEE directive, this cross-out trashbin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste. Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country P -A October 2012 iii

3 Document Revision History Version Description Date P11-A Original release of the Mobile Extension Client (MXC) Windows Mobile OS Installation Guide October P11-A October

4 Table of Contents 1 Introduction Scope Targeted Audience Mobile Extension Client Installation Procedure Setting Icon Locations Installing on the EWP/MC55A0/MC75A Installing on the ES400/MC Licensing P11-A October

5 1 Introduction 1.1 Scope This document explains the installation of the Mobile Extension Client (MXC). 1.2 Targeted Audience Engineering Support Device Provisioning P11-A October

6 2 Mobile Extension Client MXC can be installed on multiple platforms. MXC for Windows Mobile OS supports the following target devices: MC55A0 MC75A0 EWP2100/3100 ES400 MC P11-A October

7 3 Installation Procedure 3.1 Setting Icon Locations Identify which icons appear on the screen by setting registry keys. Some steps below require the login icon to be available to set credentials. This procedure explains how to do that. Icons are arranged in a matrix with four columns (A, B, C and D) and four rows (1, 2, 3 and 4). Multiple panels may appear on screen simultaneously. In the image below, the TEAM panel, the Tools panel and the Cellular panel are all visible. Rows 1 and 2 belong to the TEAM panel. Row 3 belongs to the Tools panel and Row 4 belongs to the Cellular panel. The empty positions (no icon) in the image below are B2, C4 and D4. The table below shows the key registries to use to locate the icons in the panel. Key Registry Value A1_Id 1 A2_Id 2 A3_Id 15 A4_Id 11 APP1_Argument APP1_Path APP1_PNGimage B1_Id 7 B2_Id 10 B3_Id P11-A October

8 B4_Id 12 C1_Id 6 C2_Id 3 C3_Id 16 C4_Id 0 D1_Id 9 D2_Id 14 D3_Id 17 D4_Id 0 Features values None=0; Phone=1; Status=2; Login=3; Contacts=4; Open SL=5; TEAM SMS=6; PTT Speaker=7; Policy Profile=8; Voic =9; CF_SM=10; CellularVoic =11; CellularSms=12; =13; WiFiLevel=14; File Explorer=15; Calc=16; Tasks=17; Alarms=18; Fusion=19; App1=20 Launch Application APP1_Path=fexplore.exe, APP1_PNGimage=fexplore.png The features values key registry specifies the respective values of the application to be entered in the location key registry value. For example, to set the Fusion icon (Value = 19) in the B1 location instead of the PTT Speaker icon (Value = 7), set the B1_Id key registry value to 19. After rebooting the device, the TEAM Home screen is the following: To put the login icon in the C2 position, set the registry HKEY_CURRENT_USER\Software\Motorola\TEAM\Home_Features Key :C2_Id (or the ID of the position you want) to Value: 3 (Login) 3.2 Installing on the EWP/MC55A0/MC75A0 1) Using Active-synch or a similar program, copy the MXC-specific installer for the device to the phone. Select the MXC.cab file and run it to complete the installation on the device. 2) Set the local DateTime and TimeZone for update in one of four ways by configuring the following registry key value: HKLM/Motorola/UI/OAPDateTimeEnabled 0: Neither DateTime nor Timezone will be updated from OAP. 1: Only DateTime will be updated from OAP. 2: Only TimeZone will be updated from OAP. 3: Both DateTime and TimeZone will be updated from OAP. 3) Associate the device to the Wi-Fi network P11-A October

9 4) Reboot the phone. 5) After the reboot, open the login application and set credentials. 3.3 Installing on the ES400/MC65 The following steps only apply for specific FMC license modes, with a WAN connection through a VPN (an installed SIM card is required to complete the configuration and use the device). 1) Associate the device to the Wi-Fi network. 2) For devices to be set in Secure, Data-only-FMC or Standard-FMC modes, the VPN client to be used should first be installed on the device. Here is an example installation of a NetMotion VPN client: 2.1 Install the VPN client (example: NetMotion Mobility XE Client [File Name: nmc.wm.professional - Version: 9.21] 2.2 During the installation, select the Device option P11-A October

10 2.3 Select the I accept this agreement option. 2.4 Select the Server name or IP address option and enter the server IP number P11-A October

11 2.5 Click No to prevent a screen pop-up after installation of the Netmotion client. 2.6 Open the Mobility XE Client app P11-A October

12 2.7 Click the Configuration button. 2.8 Set the following options: Uncheck Show status icon in system tray. Uncheck Show warning messages. Check Load client when Windows starts. Check Override server s default setting and select the Bypass Server option from the pull-down menu P11-A October

13 3) Copy the MXC-specific installer for the device to the phone and install it. Do not reboot the phone after installing the MXC.cab file. 4) For devices set in Secure, Dataonly-FMC or Standard-FMC mode, the settings for the WAN data connection can be configured by registry key values: Variables in blue are dependent on which carrier you use. [HKEY_LOCAL_MACHINE\Software\Motorola\DcManager] ; Could be "My Work Network" also (for example) ; If it doesn't exist it will be created "NetworkName"="TEAM Phone" ; Proxies for the network ; If the network connects to the internet through a proxy server ; set the corresponding values. Null string if not applicable. ; The not null string proxies will be created "HTTPProxy"="" "WAPProxy"="" "SecureWAPProxy"="" "SocksProxy"="" ; 0 for Socks4, not 0 for Socks5 "Socks5"=dword: ; Data Connection "AdapterName"="TEAM Phone" "ServerName"="gprs.example.com" "User"="hsdpa" "Password"="hsdpa" ; If AlwaysOn is true, the connection will connect automatically and ; will never disconnect. It doesn't mean that the application will ; allways stay connected to that connection. The application may connect ; or disconnect from that AlwaysOn connection at any time, or use a ; different connection instead. "AlwaysOn"=dword: ) Set the local DateTime and TimeZone with the following registry: HKLM/Motorola/UI/OAPDateTimeEnabled 0: Neither DateTime nor Timezone are updated from OAP. 1: Only DateTime are updated from OAP. 2: Only TimeZone are updated from OAP. 3: Both DateTime and TimeZone are updated from OAP P11-A October

14 6) Restart the phone. 7) After the reboot, open the login screen to set the credentials. 8) A message prompts you to reboot the device (this is a second reboot) so that the license changes take effect. Press Yes to reboot the phone P11-A October

15 4 Licensing Whenever you configure or change the List of Enterprise SSID and/or the Licensing mode on the WSM, restart the phone so the changes can take effect. To force a dual-mode phone (ES400/MC65) to run in VoWLAN-only mode, set the following registry key to the indicated value: HKLM/Motorola/UI: TeamPhoneMode : 1 VoWLAN-only mode does not allow connection for MXC functionality through the WAN data channel; this can allow devices without cellular service to be used for MXC services P11-A October