MATERIAL SAFETY DATA SHEET

Transcription

1 1 of 13 MATERIAL SAFETY DATA SHEET PART NUMBER This document- Sheet is the copyright protected material of ABSL and may not be edited, amended, altered or changed in any format (in whole or in part) without the express written authorisation of ABSL. It is the duty and responsibility of the shipper to provide un-edited copies of this document to any party transporting, storing, maintaining, using, and / or operating the products. Should any party require this document to be translated into any language other than English they should immediately contact ABSL at the address detailed below. It is the responsibility and duty of the shipper to advise ABSL of any specific requirements or concerns either they or any third party may have in regard to the batteries, this document or any information contained herein. This information relates to the specific batteries detailed herein and should under no circumstances be relied upon in regard to any other battery product or chemistry. It is the responsibility of the party transporting, storing, using, maintaining, and / or operating the batteries to satisfy themselves as to the suitability and completeness of the information provided for each and every specific use or operation (including but not limited to operation, charging, transportation, storage, maintenance). ABSL Power Solutions Ltd Denchi House Thurso Business Park Thurso, Caithness KW14 7XW Tel: +44 (0) Fax: +44 (0)

2 2 of 13 DISTRIBUTION LIST Distribution of this document is controlled by Configuration Management Office. Only the holders listed below will automatically be informed of changes. Original: ABSL Intranet Copy 1: T/Configuration Control Copy 2: Customer (As required) Document Number Document Title Sheet for Lithium 1 2 Issue Date

3 3 of 13 Issue Date Author/ s AMENDMENT RECORD Change Details (include reference to CCBs etc.) Pages JHO First Issue of Document All J. Orr ECR3807, New Class 9 requirements. All

4 4 of 13 CONTENTS 1. Chemical Product and company Identification 5 2. Composition and Information On Ingredients 5 3. Hazard Identification 5 4. First Aid Measures 6 5. Fire Fighting Measures 6 6. Accidental Release Measures 6 7. Handling and Storage 6 8. Exposure Controls and Personal Protection 7 9. Physical Data Stability and Reactivity Toxicological Properties Ecological Information Disposal Considerations Transport Information Regularity Information Other Information General Precautions Storage Requirements Recommended Charging Regime in Main Depot Storage 12

5 5 of 13 SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Foster Miller Lithium Battery Product Identification Manufacturer ABSL Power Solutions Ltd Denchi House Thurso Business Park Thurso Caithness KW14 7XW Scotland Tel: +44 (0) Fax: +44 (0) SECTION 2 - COMPOSITION AND INFORMATION ON INGREDIENTS Ingredient CAS No. Weight %* CHIP Classification Risk Phrase ** Lithium Cobalt (III) Oxide (as bound solid) Carbon (as bound solid) Ethylene Carbonate (liquid) Ethyl Methyl Carbonate (liquid) Lithium hexafluorophosphate (as dissolved solid) Mark as: Harmful, may cause sensitisation Mark as: Irritating R42/43, S36 R36/37, S Xi R36,R41, S26,S36/37/ Xi, F R10, R36/37/38 S T R20/21/22,R24, R34,R36/38, S26, S36/37/39,S45 * Nominal Battery Weight 7950 Grams ** See Section 15 for full details of R(Risk) and S(Safety) phrases Nominal Cell Weight 144 Grams AGM ICR34600HC K2 Nominal: Voltage / Capacity / Watt hours Cell 3.7V / 6.0Ah / 22.2Wh Pack 37V / 24Ah / 888Wh

6 6 of 13

7 7 of 13 SECTION 3 - HAZARD IDENTIFICATION Each cell is hermetically sealed, but has a vent that will open under extreme mechanical, electrical or thermal abuse. In the event that a cell vent is activated, exposure to harmful ingredients may occur. The batteries should not be short-circuited, force discharged, overcharged, punctured, crushed, heated or incinerated. SECTION 4 - FIRST AID MEASURES In the event of electrolyte leakage or escape of electrolyte: Eyes Skin Inhalation Ingestion Further Treatment Flush with copious amounts of water for 15 minutes. Seek medical assistance if required. Remove any excess material and wash skin with soap and copious amounts of water. Remove to uncontaminated area, rest and keep warm. Seek medical assistance if required Wash out mouth thoroughly with water and then give plenty of water to drink. Obtain medical assistance. Eye contamination, persistent skin irritation and casualties who have swallowed electrolyte or been affected by inhalation of vapour should be examined by a doctor. SECTION 5 - FIRE FIGHTING MEASURES Flammability Means of Extinguishing Hazardous Combustion Products Special Protective Equipment Battery electrolyte is a flammable liquid and may be ignited by heat, sparks or flame. Dry chemical, CO 2 or copious water spray (no lithium metal is present). Carbon monoxide, carbon dioxide, lithium and cobalt oxides, hydrogen fluoride. For fires involving large quantities of product, use self-contained breathing apparatus and full protective clothing. SECTION 6 ACCIDENTAL RELEASE MEASURES Ruptured or vented cells are likely to release electrolyte which may then leak from the battery enclosure. Avoid inhaling vapours and increase ventilation. Avoid eye or skin contact. Any leaking batteries should be stored in an appropriate container containing an absorbent material e.g. Vermiculite.

8 8 of 13 SECTION 7 HANDLING AND STORAGE Handling Storage Do not short circuit, force discharge, overcharge, puncture, crush, heat or incinerate. Store in a cool place but prevent condensation forming on cells. Elevated storage temperatures (eg. above 40 0 C) will result in reduced cell life and degraded performance. Store such that mechanical damage cannot occur. SECTION 8 EXPOSURE CONTROLS AND PERSONAL PROTECTION Exposure Personal Protection No exposure can occur during normal usage. For fires involving large quantities of product, use self-contained breathing apparatus and full protective clothing. In the event of leakage, wear gloves, safety glasses and chemical apron. SECTION 9 - PHYSICAL DATA 1 Physical State Solid materials in section 2 contained within a metal casing. 2 Odour and Appearance N/A 3 Flashpoint (C) N/A 4 Vapour Pressure (mm N/A Hg) 5 Vapour Density N/A 6 Volatility N/A 7 Boiling Point(C) N/A 8 Freezing Point (C) N/A 9 ph N/A 10 Spec. Gravity N/A 11 Coefficient of water oil N/A distribution N/A = Not applicable unless individual components exposed SECTION 10 STABILITY AND REACTIVITY Thermal Decomposition Hazardous Combustion Products Explosion Cells will vent and release hazardous decomposition products when exposed to fire. Carbon monoxide, carbon dioxide, lithium and cobalt oxides, hydrogen fluoride. Each cell is fitted with a pressure release safety device, which will release electrolyte rendering the cell inactive and preventing an explosion.

9 9 of 13 SECTION 11 - TOXICOLOGICAL PROPERTIES Signs and None unless cell ruptures. Symptoms Route of Entry If electrolyte released Anticipated routes of entry, eye, skin contact and inhalation. Effect of Acute Electrolyte vapour is irritating to the pulmonary tract Exposure Effect of Chronic Electrolyte vapour in large volumes may cause Exposure suffocation and pulmonary oedema Irritancy Yes Carcinogenicity Cobalt compounds possible human carcinogens Teratogenicity N/A Reproductive N/A Toxicity Mutagenicity N/A Synergistic N/A Products N/A = Not Applicable SECTION 12 ECOLOGICAL INFORMATION No known environmental hazards at present. SECTION 13 DISPOSAL CONSIDERATIONS Dispose of as hazardous waste and in accordance with appropriate local waste regulations. SECTION 14 TRANSPORT INFORMATION The Battery is Class 9 - Miscellaneous Dangerous Goods as defined by the UN Recommendations on the Transport of Dangerous Goods Model Regulations, as its more than 20Wh per cell/100wh per pack. Shipping Name Lithium Ion Hazard Classification Class 9 UN Number 3480 Marine Pollutant No Packing Group II

10 10 of 13 SECTION 15 REGULATORY INFORMATION Lithium Cobalt (III) Oxide Carbon CHIP EC Risk Phrases Classification Mark as: Harmful, may cause R42/43 May cause sensitisation by inhalation and skin contact sensitisation S36 Wear suitable protective clothing Mark as: Irritating R36/37 Irritant to eyes & respiratory system. S22 Do not breathe dust Ethylene carbonate (1,3 dioxalan-2-one) Ethyl methyl carbonate Lithium hexafluorophosphate Xi Xi,F T R36 R41 S26 S36/37/39 R10 R36/37/38 S26 R20/21/22 Irritating to eyes Risk of serious damage to eyes In case of contact with eyes, rinse immediately with plenty of water, seek medical advice Wear suitable protective clothing, gloves & eye/face protection Flammable Irritating to eyes, skin, respiratory system In case of contact with eyes, rinse with plenty of water, seek medical advice Harmful by inhalation, in contact with skin and if swallowed R24 R34 R36/37/38 S26 S36/37/39 S45 Toxic in contact with skin Causes burns Irritating to eyes, skin, respiratory system In case of contact with eyes, rinse immediately with plenty of water & seek medical advice Wear suitable protective clothing, gloves & eye/face protection In case of accident, or if you feel unwell, seek medical advice immediately (show label if possible)

11 11 of 13 SECTION 16 OTHER INFORMATION ABSL believes that the information contained in this material safety data sheet (including data and statements) is accurate as of the date first mentioned. The information provided in each data sheet relates ONLY TO THE SPECIFIC PRODUCT DESIGNATED HEREIN AND IS NOT VALID FOR ANY OTHER PRODUCT MANUFACTURED BY ABSL OR ANY OTHER PRODUCT MANUFACTURED BY ANY OTHER PARTY. It should be clearly understood that, the material safety data sheet may not be valid where such ABSL product is used in combination with any other materials or in any process. As the conditions and methods of use of the product and information referred to in such data sheet are beyond the control of ABSL, the material safety data sheet is provided for your consideration, investigation and verification. The information contained in this material safety data sheet herein is provided free of charge and on the understanding that those using it will fully satisfy themselves that their particular conditions of use or operation present no health or safety hazards. ABSL expressly disclaims any and all loss, damage, liability or expense arising out of or in any way connected with any use of the product or such information. No statement made shall be construed as a permission or recommendation for the use of any product in a manner that might infringe existing patents. NO WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE AS CONCERNS THE INFORMATION PROVIDED BY ABSL OR ABSL'S AGENTS. ABSL ABSL is a business name of ABSL Power Solutions Limited. All rights reserved. SECTION 16.1 GENERAL PRECAUTIONS Lithium-ion batteries contain safety and protection devices. However batteries may leak fluid, generate heat, explode or ignite and cause serious injury if exposed to abuse conditions. The following general precautions must be taken when handling lithium-ion batteries: Do not short circuit batteries. Do not connect with reverse polarity. Do not store, use or charge batteries near flammable materials. Do not open, disassemble, modify or otherwise mechanically interfere with batteries. Do not crush, incinerate, penetrate, puncture, strike or otherwise subject batteries to strong impacts or shocks. Do not use batteries in environments out with the specified operating environment. Do not place batteries in fire, heat batteries (e.g. by placing on heater, in microwave/oven, in direct sunshine etc.). Do not continue charging a battery if it does not recharge within the specified charging time. Do not charge at temperatures out with the specified charging temperature range. Immediately discontinue use of a battery if, while storing, charging, or discharging the battery, the battery emits an unusual smell, feels hot, changes colour, changes shape, or appears abnormal in any other way.

12 12 of 13 Do not discharge batteries using any device except for the specified host equipment. If a battery is used in devices other than those it is designed to operate then the battery may become damaged and its life expectancy reduced. If the equipment causes an abnormal current to flow, it may cause the battery to leak fluid, generate heat, explode or ignite and cause serious injury. SECTION 16.2 STORAGE REQUIREMENTS Due to the fact that batteries utilize a chemical reaction, performance will deteriorate over time even if stored for long periods without use. In addition, if parameters such as charge, discharge and ambient temperatures are not maintained within the specified limits, then the life expectancy of the batteries will be reduced. To minimize the deterioration the guidelines below should be followed: should be stored in an environment that is dry, cool and well ventilated. should be stored in their original packaging until used or charged for maintenance purposes. Do not store batteries near heating equipment or expose to direct sunlight for long periods. Do not store batteries in areas where they can get wet. should be stored by type and not mixed with other lithium chemistry derivatives. should be stored on materials that are non-flammable and the area shall be clearly marked as containing flammable materials. should be stored at temperatures of between 10 C and 30 C for optimum performance. Storage between -20 C and +50 C is possible, but will result in performance losses and should be avoided. must not be stored at temperatures greater than 50 C. SECTION 16.3 RECOMMENDED CHARGING REGIME The recommended charging regime for Li-Ion battery packs is conducted using constant current followed by constant voltage. Charge termination is based upon a current taper limit or a time limit whichever occurs first. Constant current 6.9A ± 0.1A Constant voltage 42.3V ± 0.1V Termination Current taper limit 0.4A Max Time limit 5hrs ± 10mins The temperature range over which the battery can be charged is recommended at 10 C to 30 C. Charging batteries at temperatures outside this range can cause damage to the battery and will reduce battery life expectancy. As batteries age and their capacities fade the internal resistance of the cells increases such that batteries will take longer to become fully charged. will be shipped with a relative state of charge of 70% +5% -10%

13 13 of 13 SECTION 16.4 BATTERIES IN MAIN DEPOT STORAGE As long as the environment in which the batteries are stored is not subject to extreme variations in temperature or humidity and meets the following guidelines, then the batteries will not require any maintenance for timescales given in Table 1. Table 1 Battery Maintenance Free Periods in Storage Initial State of Charge Recovered Capacity Ah 80% % % 2 2 0% 0 1 Expected Storage Period (Maximum) Months After the indicated timescales, the batteries have to be boost-charged to keep them in good condition. This is achieved by charging at the recommended charging regime, or equivalent. The batteries should then be returned to their original packaging and can be stored for another maintenance free period before requiring another boost-charge. For general purposes clean the batteries using a clean, damp cloth, taking special care not to get the terminals wet and then dry the battery before it goes back into storage. Prior to use batteries should be charged to full capacity using the recommended charging regime, or equivalent. that are not in main depot storage are considered to be in use and as such do not require long periods of boost charging as long as they are not being left in a fully discharged state. should not be left fully discharged or connected to host equipment unless the host equipment is in use as electrical discharge of each battery should not be continued below its normal end point voltage or beyond its rated capacity. If a battery is not going to be recharged and reused in the following 2 weeks after it has been fully discharged then it should be a boost-charged in line with batteries in main depot storage.