UNILIC ACRYLIC EMULSION

Transcription

1 UNILIC ACRYLIC EMULSION Updated on 18 Aug 2010 DESCRIPTION USES An acrylic emulsion paint with excellent resistance to algae and fungus growth. Complies with Singapore Standard (SS150-Type1:1998). Certified to the Singapore Green Labeling Scheme (ID: ). As a decorative & protective finish for various exterior and interior substrates: Concrete Plaster Brickwork Hard & Soft Board CHARACTERISTICS Easy application Excellent durability & colour retention Excellent adhesion, water and scrub resistance High opacity for good coverage APPLICATION DATA METHOD OF APPLICATION PAINT DILUTION PRACTICAL COVERAGE DRYING TIME OVERCOATING INTERVAL STORAGE Airless spray, Brush, Roller Product is ready for use. If thinning is required, max. 10% using fresh water. 11 m 2 / Ltr / coat (standard) 30 mins at 30 C Min. 2 hrs at 30 o C Replace lid cover after each use. Remaining paint must be stored in cool, dry and clean place. GENERAL INFORMATION SPECIFIC GRAVITY PACKING SIZE RECOMMENDED SEALER 1.35 g / cm 3 (White) 20 Ltrs Hi Sealer Water Base, Oil Base Sealer No.3, AP Sealer Kansai Paint (Singapore) Pte Ltd 57 Penjuru Road, Singapore Tel / Fax

2 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY Product Name Product Code No. Product Type : Unilic Emulsion Paint : 236-XXXX : Water Based Acrylic Emulsion Paint Name Of Manufacturer : Kansai Paint (Singapore) Pte Ltd Address : 57, Penjuru Road, Singapore Department : Technical Department Person In Charge : Technical Manager Telephone No. : (65) Fax No. : (65) HAZARDS IDENTIFICATION : {GHS Classification} Skin irritation Category 2 Eye irritation Category 2 {GHS label elements} Symbols: Signal Words: "Warning" Page 1 of 5

3 {Hazard Statements} May cause skin irritation. May cause eye irritation. {Precautionary statements} 1. Keep container tightly closed. 2. Wear protective gloves and eye/face protection as specified by the competent authority. 3. Use in a well-ventilated area. 4. Avoid breathing dust/fume/gas/mist/vapours/spray. 5. Wash thoroughly after handling. 6. Do not handle until all safety precautions have been read and understood. 7. Avoid release to the environment if this is not the intended use. 3. COMPOSITION / INFORMATION ON INGREDIENTS : SR. No. Component s Name Wt (%) CAS No. 1 Ammonium hydroxide < FIRST-AID MEASURES : a) Eye Contact : Flush eyes thoroughly with clean water for 15 minutes or more. If irritation persists, consult the physician showing SDS. b) Skin Contact : Remove contaminated clothing. Wipe the clinging matter with a clean cloth. Flush the skin with plenty of soap and water. Get medical attention, showing SDS, if symptom or pain persists. c) Inhalation : Remove to fresh air and rest. Perform artificial respiration, if breathing gets irregular or stops. Oxygen may be given if necessary. If signs and symptoms of toxicity persist, get medical attention, showing SDS. d) Ingestion : If accidentally swallowed, do not induce vomiting. Take rest and consult physician, showing SDS. Page 2 of 5

4 5. FIRE FIGHTING MEASURES : a) Fire Extinguishing Media / Agents : Product is non-combustible. b) Fire Fighting Instructions : Fight fire with normal precautions in case of peripheral fire. 6. ACCIDENTAL RELEASE MEASURES : Wear proper protectors (gloves, respirator, safety goggles, apron etc.) Recollect the spilled or leaked material in a closed container and keep in a safer place ie. away from ignition or heat source. Dispose off waste or clinging matter according to related regulations. Furnish proper extinguisher for accidental fire. Recollect spill or leak with tool of non-spark material. Recollect by absorbing with dry sand or soil or other non-flammable matter. Prevent from flowing out by surrounding with banking, if in large amount. Do not pollute environment. 7. HANDLING AND STORAGE : 7.1 Handling : Handle in a well ventilated area. Close the container necessarily during and after use. Wear proper protectors to avoid contact of skin, eyes, mucosa and clothing. Clean hands and face thoroughly after handling. Install proper local ventilator and wear proper protector in closed working space. 7.2 Storage : Avoid direct sunlight. Store in well ventilated area. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION : 8.1 Engineering Controls : Use equipment made of corrosion-resistant materials. Use equipment that has been designed to ensure minimum direct contact with the skin or exposure to the material. 8.2 Personal Protection : Eyes : Wear safety goggles Skin and Body : Wear gloves impervious to organic solvent and chemical : Wear suitable clothing to avoid direct contact of skin during handling. The clothing should be chemical-proof. Respiratory System : Wear a suitable mask when spraying Page 3 of 5

5 9. PHYSICAL AND CHEMICAL PROPERTIES : Appearance Liquid % Volatiles (By Wt.) Odour Mild odour Vapour Density (Air=1) >1 Colour White & colours Vapour Pressure (mm o C) N.AV Boiling Range ( o C) >100 Solubility In Water Dilutable Specific Gravity (H 2 O=1) ph 7 8 FIRE AND EXPLOSION DATA : Flash Point : Not measurable Flammable Limits (%) : Lower : N.AP. Upper : N.AP. 10. STABILITY AND REACTIVITY : Condition (Temp., light etc.) : Does not react under normal conditions. Hazardous Reaction : Does not undergo hazardous polymerization. Product Decomposition : N.AV. Other Hazardous Information : Avoid letting cloth, paper, brush or roller which contains the paint or its dust to accumulate or to lie around. 11. TOXICOLOGICAL INFORMATION : (Effects Of Acute Overexposure) Skin Contact : May cause slight irritation and reddening. Eye Contact : Causes irritation and pain. Swallowing : Moderately toxic. May cause nausea, abdominal discomfort, vomiting, diarrhoea or dizziness. 12. ECOLOGICAL INFORMATION : Take precautions during handling because it may contaminate the environment when it leaks or spills or when it is dumped. Biodegradability : N. AV. Bioaccumulation : N. AV. Sewage Treatment : N. AV. 13. DISPOSAL CONSIDERATIONS : Dispose through authorized industrial waste handling agent. Page 4 of 5

6 14. TRANSPORTATION INFORMATION : General : According to precautions relating to handling and storing. Land Transportation : Accord to transportation methods specified in Fire Service Law, Industrial Safety and Health Law or Poisonous and Deleterious Control Law, if necessary. Maritime Transportation : Accord to requirements specified in the Vessels Safety Law. Air Transportation : Accord to requirements specified in the Aviation Act. UN Number : Not classified 15. REGULATORY INFORMATION : Follow the local regulations. 16. OTHER INFORMATION (IF ANY) : Note : N. AV : Not Available N. AP : Not Applicable The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Kansai Paint (Singapore) Pte Ltd shall not be held liable for any damage resulting from handling or from contact with the above product. Version 1 Page 5 of 5