ECTFE (Halar ) Piping System

Size: px
Start display at page:

Download "ECTFE (Halar ) Piping System"

Transcription

1 Lit AH08-1 Material Propertie Page Effective November, 08 Supercede AH05-1, ted January 1, 05 All are in Canadian Dollar F.O.B. Thornhill, Ontario. Taxe extra. Dicount Code A PDF Publihed November, 08 General Propertie of ECTFE Preure Curve for ECTFE Pipe Permiible Component Operating Preure P B for ECTFE Chemical Reitance T1-T2 T T T5 Pipe ECTFE (Halar ) Piping Sytem Pipe, Fitting, Pipe Support & Valve (Zero Dead Leg Diaphragm) Pipe 2 Butt Fuion Fitting 0 o Elbow Short Spigot 2 0 o Elbow Long Spigot 3 5 o Elbow Long Spigot 3 Tee Short Spigot Concentric Reducer Long Spigot Concentric Reducer Short Spigot 5 End Cap Long Spigot 5 ANSI Stub Flange Short Spigot 6 ANSI Backing Ring 6 DIN Stub Flange Short Spigot 7 DIN Backing Ring 7 Union 8 Valve Diaphragm Valve 8 Piping Support Pipe Clip - 11/08 Chemline Platic Limited 08 Chemline i a regitered trademark of Chemline Platic Limited Your Pipeline To Quality Valve, Piping, Flow Meter and Control 55 Guardman Road Thornhill, Ontario Cana, L3T 6L2 Tel: Fax: [email protected]

2 ECTFE (Halar) Material Propertie ECTFE i refered to a Halar General propertie of ECTFE (Ethylenechlorotrifluorethylene) ECTFE ha a unique combination of propertie, which i due to it chemical tructure - a copolymere with a changing tructure of ethylene and chlorotrifluorethylene. Phyiological propertie ECTFE i afe for product in contact with food according to "BGA Deutchland". Thermal propertie ECTFE i reitant to heat, intenive radiation and weathering. It can withtand temperature up to 1 C and i one of the bet platic with good reitance to radiation. Reitance to Weathering ECTFE demontrate only a light change of propertie or appearance when expoed to unlight. Repeated tet howed remarkable tability of the polymer particularly with the elongation at break, which i a good indicator of the polymer-decompoition. Even after 00 hour in a "Weather - Ometer" with xenon-light the important propertie were only lightly changed. Radiation Reitance ECTFE demontrate excellent reitance to different radiation. It even how good value after irrition with 0 megarad cobalt 60. Advantage of ECTFE wide temperature application range (hort-term thermal reitance up to 1 C). good reitance againt UV- and g-radiation, therefore favourable ageing reitance. flame retarnt (UL -V0-material) - oxygen index 60 excellent abraion reitance extremely good chemical reitance againt mot acid, alkalie and olvent a well a contact with chlorine. excellent inulating propertie in connection with very good electrical value phyiological non-toxic very good urface lip characteritic Reproduction of Microorganim on ECTFE The urface of a product contructed of ECTFE i not favourable to the proliferation of microorganim - ie it i imilar to gla. Due to thee propertie, ECTFE i ued in the food and drug indutry and for ultra-pure water application. H H H H C C C C H H Cl F n Chemical tructure of ECTFE Mechanical Propertie ECTFE i a olid, very impact reitant platic, exhibiting good reitance temperature variaton. It alo ha good high impact trength, breaking train and abraion behaviour. Conult Chemline Platic for availablilty. Lit AH08-1 T1

3 ECTFE (Halar) Material Propertie ECTFE i refered to a Halar General Propertie PVDF and ECTFE Mechanical Propertie Thermal Propertie Electrical Propertie Property Stanrd Unit PVDF ECTFE Specific denity at 23 C ISO 13 g/cm Melt flow index ISO 11 g/min MFR 10/5 M FR 10 /2. MFR 2/5 MFI range Tenile tre at yield ISO 527 MPa Elongation at yield ISO 527 % 5 Elongation at break ISO 527 % 80 2 Impact trength unnotched at +23 C ISO 17 kj/m 2 12 no break Impact trength unnotched at - C Impact trength notched at +23 C 11 no break Impact trength notched at 0 C Impact trength notched at - C ISO 17 kj/m 2 Ball indentation hardne acc. Rockwell ISO 3-1 MPa 80 0 Flexural trength ISO 178 MPa 80 7 Modulu of elaticity ISO 527 MPa 00 0 Vicat-Softening point VST/B/ ISO 6 C Heat deflection temperature HDT/B ISO 75 C 15 0 Linear coefficient of thermal expanion DIN K -1 x Thermal conductivity at C DIN W/(mxK) Flaability UL V-0 V-0 -- DIN 2 Specific volume reitance VDE 03 OHM cm > 13 > Specific urface reitance VDE 03 OHM > 12 > 1 relative dielectric contant DIN at 1 MHz Dielectric trength VDE 03 kv/ 22 bi 35 Phyiologically non-toxic EEC 0/ Ye Ye FDA Ye in preperation U V tabilized Ye Ye Colour natural natural Conult Chemline Platic for availablilty. Lit AH08-1 T2

4 ECTFE (Halar) Material Propertie ECTFE i refered to a Halar Preure Curve for ECTFE (Halar) Pipe 0 Reference tre σv [N/ 2 ] C 60 C 0 C 1 5 Time Standzeit to fail [year] [Jahre] Time to fail [h] Permiible component operating preure p B for ECTFE depending on temperature and operation period. The ta in thi table applie to water ervice. The ta wa detemined from the creep curve taking into account a afety coefficient of C = 2.0 Temperatur e [ C] Operating period [year] Diameter wall thickne relation SDR 21 Pipe erie S PN 6 1) 2) Permiible component operating preure p B [bar] 1 11,5 7,2 5,5 6,6,0 6, ,5,0 5 6,3 3, 6,0 3, ,0 1, 5 2,8 1,8 2,7 1,7 1)... We recoend for the calculation of the operating preure in piping ytem to multiply the operating preure hown on the table with a ytem reduction coefficient f=0.8 (Thi value contain intallationtechnical influence uch a welding joint, flange or alo bending load). 2)... Thee operating preure have to be reduced by the correponding reducing coefficient depending on the application. Conult Chemline Platic for availablilty. Lit AH08-1 T3

5 ECTFE (Halar) Chemical Reitance ECTFE ECTFE ha an outtandingly chemical reitance. It ha excellent reitance againt mot indutrial chemical, e.g. trong mineral and oxidized acid, alkaline, metaletching-product, liquid oxygen and all organic olvent, except hot amine (z.b. aniline, dimethylamine). Material Propertie ECTFE i refered to a Halar Like other fluorine platic ECTFE will be attacked by odium and potaium. The attack depend on the contact period and the temperature. The olvent in the following table were teted with undiluted olvent. Chemical Temperature gain Influence on Influence on [ C] [%] tenile modulu elongation at break Mineral acid Sulfuric acid 78% 23 < 0.1 U U 121 < 0.1 U U Hydrochloric acid 37% 23 < 0.1 U U U U Hydrochloric acid 60% 23 < 0.1 U U Chloroulfonic acid 60% U U Oxidizing acid Nitric acid 70% 23 < 0.1 U U A C Chromic acid % 23 < 0.1 U U U U Aqua regia U U U U Solvent Aliphate U U Hexane 5 1. A U Iooctane 23 < 0.1 U U A U Aromate Benzene U U 7 7 C U Toluene U U C U Alcohole Methanol U U A U Butanol 23 < 0.1 U U A U Claical platic olvent Dimethyl formamide A U C U Dimethyl ulphoxide U U 2 U U U-Inignificant A-Reduction by -% B-Reduction by um -75% C-Reduction by > 75% Conult Chemline Platic for availablilty. Lit AH08-1 T

6 Pipe Pipe Product 705 Extruded Tuyau Produit 705 ECTFE Natural Expulé SDR 21 / ISO S- / PN Nom. 1/2" 3/" 1" 1-1/2" 2" 3" " /m H H H H H H H * and weight are per meter, upplied in 5 meter length. * et poid au mètre, fourni en longueur de 5 mètre. /m* /m* o Elbow Short Spigot Product 001 Contact or IR Butt Fuion Coude 0 o Broche Courte Produit 001 Nom. 1/2" 1-1/2" 0 3" 1 " r SDR 21 / ISO S- / PN z H H H H H Lit AH08-1 **Indicate regularly tocked item. Conult Chemline Platic for availability.

7 Butt Fuion Fitting 0 o Elbow Long Spigot Product 068 Contact or IR Butt Fuion Coude 0 o Broche Longue Produit 068 Nom. 1/2" 3/" 1-1/2" 0 3" 1 " z SDR 21 / ISO S- / PN r L H H H H H H H , o Elbow Long Spigot Product 060 Contact or IR Butt Fuion Coude 5 o Broche Longue Produit 060 Nom. 1/2" 3/" 1-1/2" 2. L SDR 21 / ISO S- / PN z H H H H H **Indicate regularly tocked item. Conult Chemline Platic for availability. Lit AH08-1 3

8 Butt Fuion Fitting Tee Short Spigot Product 006 Contact or IR Butt Fuion Pièce en T Broche Courte Produit 006 Nom. 1/2" 3/" 1-1/2" 0 3" 1 " L SDR 21 / ISO S- / PN z L H H H H H H H ,1.00 Concentric Reducer Long Spigot Product 067 Contact or IR Butt Fuion Réducteur Concentrique Broche Longue Produit 067 /1 /1 / 32/ / /32 63/32 63/ 1/63 1/ L SDR 21 / ISO S- / PN L1 L H H H H H H H H Lit AH08-1 **Indicate regularly tocked item. Conult Chemline Platic for availability.

9 Butt Fuion Fitting Concentric Reducer Short Spigot Product 007 Contact or IR Butt Fuion Réducteur Concentrique Broche Courte Produit 007 Nom. 63/ 2"/3/8" 1/63 "/2" SDR 21 / ISO S- / PN L1 L2 L H H End Cap Long Spigot Product 06 Contact or IR Butt Fuion Monture d Embout Broche Longue Produit 06 Nom. 1/2" 3/" 1-1/2" 2. L SDR 21 / ISO S- / PN L H H H H H **Indicate regularly tocked item. Conult Chemline Platic for availability. Lit AH08-1 5

10 Butt Fuion Fitting ANSI Stub Flange Short Spigot Product Contact or IR Butt Fuion Bridge de Moignon ANSI Broche Courte Produit Nom. 1/2" 3/" 1-1/2" 0 3" 1* " d SDR 21 / ISO S- / PN d h L3 L * Flange diameter lightly maller than ANSI tanrd. Backing ring are required with tub flange. * Diamêtre de la bride et légerement moindre que ANSI-tanrd. Bride de moignon neceitent anneaux de upport H ** H ** H ** H ** H ** H ** H ANSI Backing Ring Product 013 Grey PPG Gla Filled Polypropylene with Steel Core Ued together with Stub Flange for flange connection Anneaux de Support de Norme ANSI Produit 013 PPG-gri Polypropylène rempli de fibre de verre avec inertion en acier Utilié avec de bride de moignon pour de raccordementt de bride Nom. 1/2" 3/" 1-1/2" 0 3" 1 " d d b k Nom. 2-3/8" 2-3/" 3-1/8" 3-7/8" -3/" 6" 7-1/2" SDR 21 / ISO S- / PN d2 Nom. 5/8" 5/8" 5/8" 3/" 3/" 3/" 3/" No. of Bolt 8 Torque ft-lb B.0.11 B.0.11 B B.0.11 B B B Lit AH08-1 **Indicate regularly tocked item. Conult Chemline Platic for availability.

11 Butt Fuion Fitting DIN Stub Flange Short Spigot Product 012 Contact or IR Butt Fuion Bride de Moignon DIN Broche Courte Produit 012 Nom. 1/2" 3/" 1-1/2" 0 3" 1 " d3 d L h SDR 21 / ISO S- / PN L H H H H H H H DIN Backing Ring Product 01 Grey PPG Gla Filled Polypropylene with Steel Core Flange connection Ued together with Stub Flange for flange connection Anneaux de Support de Norme DIN Produit 01 PPG-gri Polypropylène rempli de fibre de verre avec inertion en acier Raccordement de bride Utilié avec de bride de moignon pour de raccordementt de bride p pi DN d d3 b k d No. of Bolt 8 8 Bolt Size M12 M12 M12 M M M M Torque ft-lb B DIN B DIN B DIN B DIN B DIN B DIN B DIN **Indicate regularly tocked item. Conult Chemline Platic for availability. Lit AH08-1 7

12 Butt Fuion Fitting Union Product 02 FPM Sealing with FDA Approval Contact or IR Butt Fuion Union Produit 02 FPM Sealing with FDA Approval Nom. 1/2" 3/" 2. d L SDR 21 / ISO S- / PN L1 L H H H Diaphragm Valve Manually Operated Product 32.1 Body One Piece PTFE/EPDM Diaphragm Contact or IR Butt Fuion Vanne a Diaphragme Controllee Manuellement Produit 32.1 Diaphragme PTFE/EPDM d une pièce Fuion Bout à Bout IR ou Contact Nom. 1/2" 3/" 1-1/2" 2. t b h SDR 21 / ISO S- / PN L1 L2 k L M6 M6 M6 M8 M kv l/min H H H H H , , , , Lit AH08-1 **Indicate regularly tocked item. Conult Chemline Platic for availability.

13 Piping Support Pipe Clip Snap-in Type with Spacer Product 38 Black PPG Gla Filled Polypropylene Include fold-over pacer plate to allow greater clearance Support de Tuyau Type à agrafe avec entretoie Produit 38 PPG noir Polypropylène rempli de fibre de verre Inclut plat d entretoie repliable pour permettre de plu grand dégagement 32 h 1 2 b 3 d BB BB BB BB Pipe Clip Retainer Type Product 0 Black PPG Gla Filled Polypropylene Include nap-on retainer Support de Tuyau Type arrêtoir Produit 0 PPG noir Polypropylène rempli de fibre de verre Inclut arrêtoir à agrafe z h d2 b d d BB BB BB **Indicate regularly tocked item. Conult Chemline Platic for availability. Lit AH08-1

14 Piping Support Pipe Clip Low Cot Snap-in Type Product CLIP Grey PP* Support de Tuyau Type prix reduit à clic Produit CLIP PP Gri* 32 b d1 d2 h h1 h t CLIP.00.B CLIP.00.B CLIP.0032.B Carton Quantity ** ** * Alo available in black HDPE (high denity polyethylene). Change B to PE in item number. * Aui diponible en PE (polyethylène noir. Changez B à PE n le numero de produit. ** are each, old only in carton quantitie. ** à l unité, eulement vendu au carton plein. Pipe Clip Low Cot Retainer Type Product CLIP Grey PP* Include nap-on PVC retainer Support de Tuyau À Ba avec Retenue Produit CLIP PP Gri* Retenue de PVC nap-in inclu b d1 d2 H h k t 1 15 z * Alo available in black HDPE (high denity polyethylene). Change B to PE in item number. * Aui diponible en PE (polyethylène noir. Changez B à PE n le numero de produit. ** are each, old only in carton quantitie. ** à l unité, eulement vendu au carton plein CLIP.000.B CLIP.00.B CLIP.0063.B CLIP.0075.B CLIP.000.B CLIP.01.B Carton Quantity ** ** Guardman Road, Thornhill, Ontario, Cana, L3T 6L2 Tel: [email protected] Fax: Your Pipeline To Quality Valve, Piping, Flow Meter and Control Lit AH08-1

Polyethylene (PE) pipes Dimensions

Polyethylene (PE) pipes Dimensions DEUTSCHE NORM Augut 1999 Polyethylene (PE) pipe Dimenion { 8074 ICS 23.040.20 Rohre au Polyethylen (PE) PE 63, PE 80, PE 100, PE HD Maße Superede September 1987 edition. In keeping with current practice

More information

σ m using Equation 8.1 given that σ

σ m using Equation 8.1 given that σ 8. Etimate the theoretical fracture trength of a brittle material if it i known that fracture occur by the propagation of an elliptically haped urface crack of length 0.8 mm and having a tip radiu of curvature

More information

HDPE Physical Properties. HDPE_physical-properties_v002 Copyright Marley Pipe Systems (Pty) Ltd 2010

HDPE Physical Properties. HDPE_physical-properties_v002 Copyright Marley Pipe Systems (Pty) Ltd 2010 HDPE Physical Properties * HDPE_physical-properties_v002 Copyright Marley Pipe Systems (Pty) Ltd 2010 Contents Introduction 3 Table of Physical Properties 3 Comparison with Other Plastic Materials 4 The

More information

Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value

Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be

More information

Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties

Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties Worldwide tank building applications using PP-Sheets: The effect of Foaming on properties Marcus Hoffmann 1, Dominic Müller 1, Marco Stallmann 1, Matt Curtis 2 1 Simona AG Teichweg 16, 55606 Kirn, Germany

More information

Piping Systems. From design to your turnkey partner

Piping Systems. From design to your turnkey partner Piping Systems From design to your turnkey partner Plasticon Composites 02 About Plasticon Composites Plasticon Composites is a full-service turnkey solution provider in the field of corrosion resistant

More information

Industrial Piping Systems

Industrial Piping Systems Industrial Piping Systems Proline Ultra Proline Super Proline Chem Proline ProVent Welding Equipment 6-2012 Industrial Water and Chemical Transport Solutions Asahi/America pioneered the market for thermoplastic

More information

Environmental Product Declaration

Environmental Product Declaration Environmental Product Declaration PVDF-System According to EN 15804 Circling and distribution of purified water in a pharmaceutical plant Georg Fischer Piping Systems Ltd. Ebnatstrasse 111 CH-8201 Schaffhausen

More information

Inspired By Challenge. Technical information polymer characteristics

Inspired By Challenge. Technical information polymer characteristics Inspired By Challenge Technical information polymer characteristics Technical Information Seat materials - overview Habonim s extensive field experience, which lets us design valves that meet the diverse

More information

Engineering Plastics Technical Presentation

Engineering Plastics Technical Presentation Engineering Plastics Technical Presentation Product Overview TAROMID A PA resin Available in different grades, UV and heat stabilized, glass fibres reinforced (also high impact), with glass beads, mineral

More information

Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet

Amodel AS-1133 HS. polyphthalamide. Technical Data Sheet Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses

More information

B05: Cable protection and sheathing

B05: Cable protection and sheathing SHEATHING MATERIALS MDPE, BLACK This is the standard sheathing material for cables for outdoor use. The material is UV stabilised with using 2.5 ± 0.5 % carbon black. It has excellent weathering resistance.

More information

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF Nylon 6/6 meets MIL-M20693B "A" Type 1, LP410A, and ASTM D789-66 Type 1, GDE 2 All test performed per ASTM specifications. Parts

More information

TECHNICAL DATA SHEET GRILON BG-15 S

TECHNICAL DATA SHEET GRILON BG-15 S TECHNICAL DATA SHEET GRILON BG-1 S Grilon BG-1 S is a heat stabilised PA6 injection moulding grade with 1% glass fibres. Grilon BG-1 S has the following important properties: Excellent surface finish Easy

More information

fr fire retardant MARMOLEUM

fr fire retardant MARMOLEUM MARMOLEUM fr fire retardant MARMOLEUM fr 63038 63173 63174 sahara van gogh caribbean 63120 63163 63164 indian summer opera rosato 63182 63055 63030 blue fresco blue lapponia 63032 63146 63048 graphite

More information

GENERAL PROPERTIES //////////////////////////////////////////////////////

GENERAL PROPERTIES ////////////////////////////////////////////////////// ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

EVALUATION ACCORDING TO ASTM F

EVALUATION ACCORDING TO ASTM F Bodycote Report EVALUATION ACCORDING TO ASTM F 2023 Evaluation of the chlorine resistance according to ASTM F 2023 of the PB pipe material PB4267 GREY Mattias Svedberg RESTRICTED DISTRIBUTION SE-611 82

More information

Digital inductive conductivity transmitter

Digital inductive conductivity transmitter Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections

More information

DuPont Crastin. thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE

DuPont Crastin. thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE DuPont Crastin thermoplastic polyester resin PRODUCT AND PROPERTY GUIDE DuPont Crastin thermoplastic polyester resin DuPont Crastin PBT (polybutylene terephthalate) thermoplastic polyester offers exceptional

More information

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1

HYDRAULIC PIPING STANDARD HANDBOOK. Revision 1 HYDRAULIC PIPING STANDARD HANDBOOK Revision 1 Preface We aim to fill a gap in technical literature. At this moment there are no hydraulic piping standards available which cover different pressure classes

More information

EXPERIMENT 11 CONSOLIDATION TEST

EXPERIMENT 11 CONSOLIDATION TEST 119 EXPERIMENT 11 CONSOLIDATION TEST Purpoe: Thi tet i performed to determine the magnitude and rate of volume decreae that a laterally confined oil pecimen undergoe when ubjected to different vertical

More information

CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520

CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520 CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520 Precise point-of-use chemical flow control innovative flow control technology Overview Entegris is solving today s flow control

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,

More information

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes

Naue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

Hose and Tube Fittings Series 1-3

Hose and Tube Fittings Series 1-3 Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose

More information

THERMA-TUBE preinsulated pipes and fittings Catalogue of products

THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA-TUBE preinsulated pipes and fittings Catalogue of products THERMA TUBE preinsulated pipes and fittings TABLE OF CONTENTS 1. GENERAL INFORMATION ABOUT THE USE OF PREINSULATED PIPES AND FITTINGS...

More information

LINED PIPES & FITTINGS

LINED PIPES & FITTINGS LINED PIPES & FITTINGS ANSI Standard LINED PIPES & FITTINGS The product The name of the product. Page No. PTFE Lined pipes 16 RL Lined pipes 17 SL Lined pipes 18 Jacketd lined pipes 19 Solid and Lined

More information

HOSTAFORM C 9021 POM Unfilled

HOSTAFORM C 9021 POM Unfilled Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;

More information

ALLOY C276 DATA SHEET

ALLOY C276 DATA SHEET ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the

More information

ARMYLOR PTFE / PFA. din 2848 TECHNICAL GUIDE

ARMYLOR PTFE / PFA. din 2848 TECHNICAL GUIDE ARMYLOR PTFE / PFA lined pipes and fittings din 2848 TECHNICAL GUIDE PTFE / PFA lined pipes and fittings are recognized as the ideal solution for conveying or treating highly corrosive fluids using severe

More information

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow

More information

STRAUB-PLAST-PRO Technical Manual

STRAUB-PLAST-PRO Technical Manual STRAU-PLAST-PRO Technical Manual Contents STRAU-PLAST-PRO 3 Properties 3 Example 3 The full set 4 components 5 Conntectors 5 Pipe dimensions and tolerances 5 straub-plast-pro l Coupler 6 straub-plast-pro

More information

Puddle Flange. FRANK Puddle Flange

Puddle Flange. FRANK Puddle Flange Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many

More information

BUMAX. REYHER your partner for the BUMAX range

BUMAX. REYHER your partner for the BUMAX range BUMAX high-tensile stainless steel fasteners REYHER your partner for the BUMAX range Strongest stainless steel fasteners in the world BUMAX 88 and BUMAX ready for delivery from stock Wide range of BUMAX

More information

100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes. Summary Technical Report

100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes. Summary Technical Report December 2014 100 Year Service Life of Polypropylene And Polyethylene Gravity Sewer Pipes A TEPPFA Project in cooperation with Borealis and LyondellBasell Summary Technical Report (Based on Extracts of

More information

PEX Pipes for Plumbing Applications

PEX Pipes for Plumbing Applications PEX Pipes for Plumbing Applications Introduction How PEX pipes are made Reasons for using PEX systems Industry standards and tests PEX joining systems Code acceptance Design considerations Installation

More information

Bi-Objective Optimization for the Clinical Trial Supply Chain Management

Bi-Objective Optimization for the Clinical Trial Supply Chain Management Ian David Lockhart Bogle and Michael Fairweather (Editor), Proceeding of the 22nd European Sympoium on Computer Aided Proce Engineering, 17-20 June 2012, London. 2012 Elevier B.V. All right reerved. Bi-Objective

More information

Above Ground Fittings. Below Ground Fittings. tooling

Above Ground Fittings. Below Ground Fittings. tooling C O N T E N T S Above Ground Fittings Crimp House Entry Tee 3 Crimp House Entry Tee Body 3 Building Entry Tee 3 Factory Entry Elbow 4 Meter Box Adaptors Crimp C Clip Meter Box Adaptor 4 Crimp Stab-in Meter

More information

ABOUT US ABOUT PE THE DEFINITION OF POLYETHYLENE

ABOUT US ABOUT PE THE DEFINITION OF POLYETHYLENE ABOUT US ABOUT PE We have been manufacturing polyethylene (HDPE- High Density Polyethylene) pipes, fittings and Butt Welding Machines in addition to design and montage Infrastructure-Waterworks since 1994.

More information

Product Information PA 2200. General Properties. Thermal properties of sintered parts. PA 2200 is a non-filled powder on basis of PA 12.

Product Information PA 2200. General Properties. Thermal properties of sintered parts. PA 2200 is a non-filled powder on basis of PA 12. PA 2200 PA 2200 is a non-filled powder on basis of PA 12. General Properties Property Units Water absorption ISO 62 / DIN 53495 100 C, saturation in water % 1.93 23 C, 96% RF % 1.33 23 C, 50% RF % 0.52

More information

FDM Material Properties

FDM Material Properties Details FDM Standard lead time: Layer thickness: Standard accuracy: Surface finish: Maximum part dimensions: Capacity: Materials: 4-5 days 0.25 mm (for ABS, ABSi) 0.18 0.25 mm (for ABS-M30, ABS-M30i, PC,

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

Caps STANDARD WEIGHT Inches / Pounds

Caps STANDARD WEIGHT Inches / Pounds Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe

More information

DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported

DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported 1 Field of application This standard specifies the colours for the identification of

More information

Effect of Sterilization Techniques on Polymers

Effect of Sterilization Techniques on Polymers Effect of Sterilization Techniques on Polymers Contents of Presentation Introduction to Polymers Properties and Stability of Polymers Affect of Ionising Radiation and Ethylene Oxide on Polymers The need

More information

OUTLINE. How PEX pipes are made Capabilities of PEX pipes, standards, testing PEX pipes for Plumbing and other applications

OUTLINE. How PEX pipes are made Capabilities of PEX pipes, standards, testing PEX pipes for Plumbing and other applications PEX Pipes for Plumbing Presented at the 40 th ASPE Convention, Oct 2004 Lance MacNevin, Chair, PPI High Temperature Plastics Division Camille George Rubeiz, P.E., Director of Engineering, PPI OUTLINE How

More information

Festoon 715 P PUR cable for flexible application in festoon systems

Festoon 715 P PUR cable for flexible application in festoon systems CABLES FOR CRANE AND CONVEYOR APPLICATIONS Festoon 715 P PUR cable for flexible application in festoon systems S AB BRÖCKSKES D-VIERSEN Festoon 715 P 1 x 16.0 mm 2 C Marking for Festoon 715 P 07150162:

More information

sealed close coupled pumps

sealed close coupled pumps sealed close coupled pumps centrifugal self-priming 1 - and are different configurations of the same range of centrifugal axle pumps, self-priming which offers reliability in use. Specifically designed

More information

Water and Secondary Containment Concrete Structures

Water and Secondary Containment Concrete Structures Water and Secondary Containment Concrete Structure Repair and Protection of Joint and Crack Sikadur Combiflex Sytem TYPICAL JOINT OR CRACK SEALING PROBLEMS IN WATER STRUCTURES Water Structure Civil Engineering

More information

Features. Picture. Specifications

Features. Picture. Specifications Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Output signal 4-20 ma Conformity error ±0.5 % FS or Standard DIN measuring

More information

Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23

Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures

More information

MaxCell Technical Manual Design Parameters

MaxCell Technical Manual Design Parameters MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50

More information

AG 9-4 ArborGard+ tree trunk protector

AG 9-4 ArborGard+ tree trunk protector AG 9-4 ArborGard+ tree trunk protector Specified ArborGard is a tree trunk protector to prevent damage by string trimmers, lawn mowers and rodents. Single protector fits trunks up to 4" in diameter, join

More information

Most suitable piping material

Most suitable piping material Oct. 13 1st Edition NEW NEW Rigid PVC Pipe and Fittings with anti water condensation layer for air conditioning drainage ESON AC DRAIN PIPE ESON AC DRAIN Fittings ESON AC DRAIN Fittings ESON AC DRAIN Flexible

More information

Ohm s Law. Ohmic relationship V=IR. Electric Power. Non Ohmic devises. Schematic representation. Electric Power

Ohm s Law. Ohmic relationship V=IR. Electric Power. Non Ohmic devises. Schematic representation. Electric Power Ohm Law Ohmic relationhip V=IR Ohm law tate that current through the conductor i directly proportional to the voltage acro it if temperature and other phyical condition do not change. In many material,

More information

IN-SITU TESTING IN-SITU TESTS. Standart Penetration Test (SPT): In-situ Tests. Assist. Prof. Berrak TEYMUR

IN-SITU TESTING IN-SITU TESTS. Standart Penetration Test (SPT): In-situ Tests. Assist. Prof. Berrak TEYMUR IN-SITU TESTING IN-SITU TESTS Ait. Prof. Berrak TEYMUR Provide: alternative deign data in-itu propertie where unditurbed ampling i not poible Large volume of material Method: Standard Penetration Tet (SPT)

More information

Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter

Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter Ed.15.01 Design Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter Standard 4026/60H Pressure rate PN 40

More information

Physical Dry Conditioned Unit Test method

Physical Dry Conditioned Unit Test method Technical Data Sheet Ixef 1022 Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.

More information

Stainless steel grade chart

Stainless steel grade chart Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0

More information

Quality Products for Secondary Containment. Application Areas: Superior Service

Quality Products for Secondary Containment. Application Areas: Superior Service Waterstops The Original EB Cap Seal System for Concrete Joints Patent No. 5,375,386 Quality Products for Secondary Containment Industrial applications mean special requirements for containment structure

More information

Heating Cable. Construction

Heating Cable. Construction Mineral Insulated High Temperature A C Constant Wattage Series Resistance Heating Cable Sets Process Temperature Maintenance to F (593 C) Maximum Exposure Temperature 4 F (76 C) (Power Off) Corrosion Resistant

More information

Data Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list

Data Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol

More information

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

C A B L E P R O T E C T I O N

C A B L E P R O T E C T I O N Safe cable protection! Elematic Cabling Systems produces in own plants a wide range of products for the cable protection, such as wiring spirals, insulated tubing, heat shrinkable tubing, etc. These products

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa

Profiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard

More information

MATLAB/Simulink Based Modelling of Solar Photovoltaic Cell

MATLAB/Simulink Based Modelling of Solar Photovoltaic Cell MATLAB/Simulink Baed Modelling of Solar Photovoltaic Cell Tarak Salmi *, Mounir Bouzguenda **, Adel Gatli **, Ahmed Mamoudi * *Reearch Unit on Renewable Energie and Electric Vehicle, National Engineering

More information

gasket type & material overview

gasket type & material overview gasket type & material overview gaskets a gasket is placed in between two objects in order to prevent leakage of any kind of the pressurized or not pressurized media. most important is the compression

More information

RPL-TECH CHANNEL CONVENTIONAL COLLECTION

RPL-TECH CHANNEL CONVENTIONAL COLLECTION RPL-TECH CHANNEL CONVENTIONAL COLLECTION Finials / Embouts LFN1-PT LFN1-NB LFN1-RB Note: Finials sold in pairs/ Embouts vendus à la paire LFN1-BR Finials / Embouts LFN2-BR LFN2-NB LFN2-PT LFN2-RB Note:

More information

HOSE, TUBE, AND PIPE CLAMPS

HOSE, TUBE, AND PIPE CLAMPS hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions

More information

ALLOY 2205 DATA SHEET

ALLOY 2205 DATA SHEET ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

INJECTION MOULD DESIGN: MARPLEX PVC RESINS

INJECTION MOULD DESIGN: MARPLEX PVC RESINS MACHINE RECCOMENDATIONS PVC requires reciprocating screw injection moulding machine with a plasticising screw to produce homogeneous melt. It is recommended that a shot weight of the part should take two

More information

SISTO-16TWA/HWA/DLU. Type Series Booklet

SISTO-16TWA/HWA/DLU. Type Series Booklet Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents

More information

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)

Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,

More information

Instructions Manual. Electromagnetic sensor Series FLOMID FX. instrumentation for fluids. R-MI-FlomidFX Rev.: 0 English version

Instructions Manual. Electromagnetic sensor Series FLOMID FX. instrumentation for fluids. R-MI-FlomidFX Rev.: 0 English version instrumentation for fluids Electromagnetic sensor Series FLOMID FX Instructions Manual! Conforms with the Pressure Equipment Directive 97/23/EC. 0830 This equipment is considered as being a pressure accessory

More information

polymer additive General Overview

polymer additive General Overview DuPont Fluoroguard polymer additive General Overview DuPont Fluoroguard is a range of colorless, odorless, and chemically inert polymer additives based on fluorinated synthetic oil. Fluoroguard is designed

More information

SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA)

SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) 1) Product Description: SD-0150 GENERAL PURPOSE ABS (Acrylonitrile Butadiene Styrene) (TA) General Purpose ABS, SD 0150 grade, is a rigid thermoplastic with good processing characteristics. It is a high

More information

BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap

BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap 1263050/6 IM-P126-07 ST Issue 6 BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation

More information

TECHNICAL BULLETIN. Serck Audco Iron Taper Plug Valve. Experience in Motion Experience in Motion SRENTB0002-03 (A4) 02/14

TECHNICAL BULLETIN. Serck Audco Iron Taper Plug Valve. Experience in Motion Experience in Motion SRENTB0002-03 (A4) 02/14 TECHNICAL BULLETIN Serck Audco Iron Taper Plug Valve SRENTB0002-03 (A4) 02/14 Experience in Motion Experience in Motion Range and Index Regular Pattern Short Pattern Standard Type Screwed ends/ Flanged

More information

P/N: DEF-0613A. Diesel Exhaust Fluid (DEF) Pumps

P/N: DEF-0613A. Diesel Exhaust Fluid (DEF) Pumps P/N: DEF-0613A Diesel Exhaust Fluid (DEF) Pumps DEF Solutions Standard Pump has designed a range of unique, preconfigured DEF Pump Packages that are engineered to transfer AdBlue (AUS32) Diesel Exhaust

More information

Bypass level indicator With magnetic display Model BNA

Bypass level indicator With magnetic display Model BNA Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height

More information

VM Series Manual Diaphragm Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 4" EPDM, Viton (FPM) or PTFE (EPDM backed)

VM Series Manual Diaphragm Valves Product Data Sheet. Valve Availability. Size Range: 1/2 through 4 EPDM, Viton (FPM) or PTFE (EPDM backed) Product Data Sheet introduction < STANDARDS > ASTM D4101-86 ASTM D3222 ASTM D2467 ASTM D2466 ASTM D1785 ASTM D1784 ASTM F441 ASTM F439 IPEX VM Series Diaphragm Valves are the ideal solution f modulating

More information

CSF16 and CSF16T Stainless Steel Steam Filters

CSF16 and CSF16T Stainless Steel Steam Filters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

TECHICAL SPECIFICATION IP65 EMI EMC Gaskets

TECHICAL SPECIFICATION IP65 EMI EMC Gaskets Pag. 1/5 TECHICAL SPECIFICATION IP65 EMI EMC Gaskets Description Market requirements permit us to offer different gaskets that cover the double function of watertight seals and electromagnetic interference

More information

GNH7/GG09/GEOL4002 EARTHQUAKE SEISMOLOGY AND EARTHQUAKE HAZARD

GNH7/GG09/GEOL4002 EARTHQUAKE SEISMOLOGY AND EARTHQUAKE HAZARD Earth Material Lecture 13 Earth Material Hooke law of elaticity Force = E Area Hooke law n = E n Extenion Length Robert Hooke (1635-1703) wa a virtuoo cientit contributing to geology, palaeontology, biology

More information

AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids

AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions

More information

Tiangang TM BW-10LD (622)

Tiangang TM BW-10LD (622) Tiangang TM BW-10LD Oligomeric Hindered Amine Light Stabilizer (HALS) Poly-(N-β-hydroxyethyl-2,2,6,6-tetramethyl-4-hydroxy-piperidyl-succinate) CAS number 65447-77-0 BW-10LD BW-10LD is a highly effective

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

FLUID MECHANICS. TUTORIAL No.4 FLOW THROUGH POROUS PASSAGES

FLUID MECHANICS. TUTORIAL No.4 FLOW THROUGH POROUS PASSAGES FLUID MECHANICS TUTORIAL No.4 FLOW THROUGH POROUS PASSAGES In thi tutorial you will continue the work on laminar flow and develop Poieuille' equation to the form known a the Carman - Kozeny equation. Thi

More information

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT

PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT PIPES AND TUBES FOR HVAC PIPING AND EQUIPMENT GENERAL INFORMATION 1.1 This section applies to piping systems for chilled water, hot water, condenser water, steam, condensate return, fuel oil, refrigerant

More information

Wet alarm valves. Wet alarm valves. FM trim

Wet alarm valves. Wet alarm valves. FM trim Description Usually, a wet alarm valve station comprise: - a Rolland wet alarm valve linked to the water motor gong. - a set of valves and by pass used to test the system. - a drain valve. - a test valve

More information

High-Performance Polymers for. Automotive E/E Systems SPECIALTY

High-Performance Polymers for. Automotive E/E Systems SPECIALTY High-Performance Polymers for Automotive E/E Systems SPECIALTY POLYMERS Get Connected with Solvay Solvay offers the industry s broadest selection of high-performance plastics for automotive electrical/electronic

More information

EOSINT P and FORMIGA P materials for plastic laser-sintering systems

EOSINT P and FORMIGA P materials for plastic laser-sintering systems EOSINT P and FORMIGA P materials for plastic laser-sintering systems Contents Pages Material data overview ALUMIDE CarbonMide PA 2200/2201 PA 2210 FR PA 3200 GF PEEK HP3 PrimeCast 101 PrimePart DC 3 6

More information

Technical. Design Data. Advanced Solutions for Pipe Technology

Technical. Design Data. Advanced Solutions for Pipe Technology Technical Design Data Advanced Solutions for Pipe Technology pipe CONNECTIONS, repair & flow control products for the utilities industry Contents Glossary of Terms 3 Glossary of Standards 4 Design Specifications

More information

Quartz Glass. Tubes and Rods

Quartz Glass. Tubes and Rods Quartz Glass Tubes and Rods PH 300, GE 214, QI PN GVB Solutions in Glass Schlackstrasse 3 52080 Aachen Germany +49-241/9108588 +49-241/9108589 E- [email protected] www.g-v-b.de Table of contents General Information

More information

Design Capacities for Structural Plywood

Design Capacities for Structural Plywood Deign Capacitie for Structural Plyood Alloale Stre Deign (ASD) The deign value in thi document correpond ith thoe pulihed in the 005 edition of the AF&PA American Wood Council Alloale Stre Deign (ASD)/RFD

More information