Stainless Steel Dissolved Oxygen Electrodes
|
|
|
- James Potter
- 7 years ago
- Views:
Transcription
1 Stainless Steel Dissolved Oxygen Electrodes DISSOLVED OXYGEN ELECTRODES The steam sterilizable family of dissolved oxygen electrodes from the phoenix Electrode Company is specifically designed for fermentation where it is necessary to subject electrodes to repeated steam sterilization. Dissolved oxygen electrodes are available in both polarographic and galvanic styles to fulfill all requirements. phoenix O 2 electrodes are compatible with most common O 2 s found in fermentation. electrodes are designed to be used with phoenix Electrode Company, Ingold IL, Cole-Parmer and Applikon O 2 s, or with other s that are designed to be used with Ingold dissolved oxygen electrodes. Galvanic electrodes are designed to be used with phoenix Electrode Company, New Brunswick Scientific, LSL Biolafitte and Applikon O 2 s. The DO probes are available for laboratory fermentation where sterilization takes place in a separate autoclave or industrial applications where sterilization takes place in-situ. The easily replaced electrode membrane cartridge is a unique feature of the phoenix polarographic and NBS galvanic dissolved oxygen electrodes. The membrane is of a special construction - a silicone and teglon composite, reinforced with stainless steel mesh. This unique membrane is very rugged and allows for repeated sterilization without damage, allowing ot to withstand severe conditions. The electrode operates without maintenance for 5 to 10 sterilizations, fermentation cycles or, in terms of time, for 6 to 8 weeks. The phoenix Biolafitte type galvanic dissolved oxygen electrode features easily replaceable FEP teflon membranes. The polarographic dissolved oxygen electrodes are available with or without automatic temperature compensation. They are designed to match the Ingold IL oxygen. Temperature compensation is not normally required when calibration is made at the same temperature as the controlled fermentation temperature with no variation.
2 SPECIFICATIONS A B C A1 A2 A3 A4 A5 OXYGEN ELECTRODE ASSEMBLY MOUNTINGS D E F G A. Detachable Lead B. O-ring Seal C. 316L Stainless steel body D. O-ring E. Anode F. Membrane Cover G. Replacement Membrane Cartridge H. O-ring I. Cathode FIGURE A1 A2 A3 A4 TYPE DESCRIPTION 19mm socket flange M18 x 1.5 3/4 NPT 3/8 NPT BODY DIAMETER 16 mm 14 mm H I A mm socket flange 10 No Thread 12 mm 11 PG mm
3 SPECIFICATIONS TYPE CATHODE ANODE RESPONSE STABILITY 1 COMPENSATION RANGE STERILIZATION RESIDUAL SIGNAL OUTPUT 2 025IP25 025IP26 025IP27 025BG25 Galvanicic Ag Pb 35mV + 10mV 025IP25 NO YES YES NO NO 0-80 C 0-80 C 0-80 C 0-80 C 0-80 C 130 C 130 C 130 C 130 C 130 C Less Than 1 na Less Than 1 na Less Than 1 na mv Less Than 0.4 µa 1 = Constant Temperature 2 = Medium Saturated With Air ORDERING INFORMATION 025IP 025BG 025NG Sensor Type Stainless Steel Galvanic, LSL Biolafitte phoenix and Applikon Compatible, Stainless Steel Galvanic, New Brunswick Scientific Compatible, Stainless Steel Temperature Compensation No Temperature Compensation Temperature Compensated Ingold Amplifier Temperature Compensated phoenix Electrode Company, Cole-Parmer, and B&C Electronics Mounting 3/8 NPT Male Thread (For NBS Headplate), 14 mm Body Diameter. 3/4 NPT Male Thread, Body Diameter. M18 x 1.5 Male Thread (For LSL Biolafitte and Applikon Headplate), 16 mm Diameter. Socket Flange, Body Diameter. 25 mm Socket Flange, Body Diameter. 12 mm Body Diameter Straight Body. 12 mm Body Diameter with PG 13.5 Thread. 025IP EXAMPLE: 025IP (, No Temperature Compensation, H Length, and Mounting.) 70 mm 120 mm 150 mm 220 mm 320 mm 420 mm XXX mm H Length H Length (Immersion length is the distance from the point of penetration inside the vessel to the tip of the probe.) 08 Mounting 10 and 03, 05, 07 and 08 Mountings 03, 05, 07, 08, 10 and 03, 05, 07, 08, 10 and 05, 07, and 08 Mountings Special Order H Length 70 mm 150 mm 220 mm 320 mm 420 mm 440 mm Galvanic (LSL Biolafitte Fermentor) 08 Mounting 05, 08, 10 and 05, 10 and 05, 10 and 05 Mounting 05 Mounting 127 mm 186 mm 229 mm 308 mm 355 mm 360 mm 432 mm 559 mm 711 mm Galvanic (NBS Fermentor) 01, 08, 10 and 01, 08, 10 and 01, 08, 10 and
4 MEMBRANE SERVICE KITS AND MEMBRANES POLAROGRAPHIC TYPES M0500P1-K1 M0500P1-K2 M0500P1-K5 M0500P1-M1 M0500P2-M2 M0500P2-M6 R GALVANIC TYPES M050BG1-K3 M050NG1-K4 M050NG1-K1 M050BG2-M3 M050BG2-M5 M050NG2-M4 M050NG1-M1 R Membrane Service Kit for O 2 electrodes with 3/4 NPT, or 25 mm mounting with O.D. body diameter. Consists of replacement O-rings, 3 replaceable membrane cartridges, Membrane Service Kit for O 2 electrodes with M18 x 1.5 mounting with 16 mm O.D. body diameter. Consists of replacement O-rings, 3 replaceable membrane cartridges, Membrane Service Kit for O 2 electrodes with PG 13.5 or 12 mm mounting with 12 mm O.D. body diameter. Consists of replacement O-rings, 3 replaceable membrane cartridges, Replacement Membrane consists of one membrane cartridge and replacement O-rings for 3/4 NPT, or 25 mm mounting, O.D. body diameter. Replacement Membrane consists of one membrane cartridge and replacement O-rings for M18 x 1.5 mounting, 16 mm O.D. body diameter. Replacement Membrane consists of one membrane cartridge and replacement O-rings for PG 13.5 or 12 mm mounting, 12 mm O.D. body diameter. O 2 electrode filling solution, 125 ml electrodes with M18 x 1.5, or 25 mm socket with 16 mm O.D. body diameter. Consists of 10 membranes (5 each of 1 and 2 mil), replacement O-rings, electrodes with 3/8 NPT mounting with 14 mm O.D. body diameter. Consists of replacement O-rings, 3 replaceable membrane cartridges, tool, and a 125 ml bottle of electrolyte. electrodes with PG 13.5 or 12 mm mounting with 12 mm O.D. body diameter. Consists of replacement O-rings, 3 replaceable membrane cartridges, tool, and a 125 ml bottle of electrolyte. Replacement Membrane consists of 10 membranes 1 mil thick and replacement O-rings for M18 x 1.5, and 25 mm mountings, 16 mm O.D. body diameter. Replacement Membrane consists of 10 membranes 2 mil thick and replacement O-rings for M18 x 1.5, and 25 mm mountings, 16 mm O.D. body diameter. Replacement Membrane consists of one membrane cartridge and replacement O-rings for 3/8 NPT mounting, 14 mm O.D. body diameter. Replacement Membrane consists of one membrane cartridge and replacement O-rings for PG 13.5 or 12 mm mounting, 12 mm O.D. body diameter. Galvanic O 2 electrode filling solution, 125 ml CABLES C1 TYPE CABLES For non-temperature compensated O 2 electrodes, used with both polarographic and galvanic O 2 electrodes. Standard 3 meter lead B I D U T CC D D BNC Connector DIN Connector for use with Ingold po 2 Dual Pin Connector for use with NBS Galvanic po 2 Banana Plugs for use with LSL Biolafitte po 2 No Connector for phoenix, Applikon, and Cole-Parmer po 2 s or for use when user supplies connector Custom cable with choice of plug, lemo connector. Specify size and pin nimber Pin Connector, for use with 025NG15 and 027NG15 Galvanic O 2 electrode. Cable features a load resistor for direct connection to a recorder with mv input. (Approx. 40 mv saturated air / water) Amphenol4-Pin Electrode head connector for use with NBS po 2 Amphenol detachable lead to Amp 4-Pin connector for use with NBS po 2
5 C2 TYPE CABLES For polarographic temperature compensated O 2 electrodes. Standard 3 meter lead I T CC DIN Connector + pins for use with Ingold po 2 No Connector for phoenix, Applikon and Cole-Parmer po 2 s, or for use when user supplies connector Custom cable with choice of plug type, lemo connector. Specify plug size and pin number Amphenol 4-Pin Electrode head connector to Amp 4-Pin Connector. For polarographic electrodes, NBS Note: Longer lead lengths are available on special order Glenmont Houston, Texas / / Fax 713/
Dissolved Oxygen Sensors
Instruction Sheet PN 51A-HxDO/rev.F June 2008 Models Hx438 and Gx448 Dissolved Oxygen Sensors For additional information, please refer to the Instruction Manuals CD shipped with this product, or visit
DISSOLVED OXYGEN PROBE
51970-88 DISSOLVED OXYGEN PROBE Introduction This instruction sheet provides information on the Hach Dissolved Oxygen Probe for use with the sension 6 Dissolved Oxygen Meter. The Dissolved Oxygen Probe
OXIGENO DISUELTO. Dissolved Oxygen. Install & forget. Sistema autolimpiable. Autoclean system
Sistema autolimpiable Dissolved Oxygen Autoclean system Applications: - water treatment - activated sludge - de-nitrification - fish pond Install & forget For special applications, the D.O monitor can
JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g. drinking and surface water monitoring,
User Guide. Heavy Duty Dissolved Oxygen Meter. Model 407510
User Guide Heavy Duty Dissolved Oxygen Meter Model 407510 Introduction Congratulations on your purchase of Extech's Heavy Duty Dissolved Oxygen / Temperature Meter which simultaneously displays Dissolved
Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61
Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:
Stainless steel process fittings
Page 1/6 Stainless steel process fittings Installation in pipe systems Installation in tanks and vessels Hygienic version FDA conformity of materials Probe length 120 mm 120 mm Availability of various
Galvanic Parts Per Million Dissolved Oxygen Systems
Galvanic Parts Per Million Dissolved Oxygen Systems Model 900 Portable s Model 9100 Model 9200 Model 9300 The Royce line of PPM level dissolved oxygen (DO) analyzers is the largest, most varied line in
User Guide. 9708 Dissolved Oxygen Probes
User Guide 9708 Dissolved Oxygen Probes Introduction The Thermo Scientific Orion 9708 dissolved oxygen probe simplifies measurements of dissolved oxygen, particularly Biochemical Oxygen Demand (BOD).
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
Milwaukee USER MANUAL
Milwaukee USER MANUAL PORTABLE DISSOLVED OXYGEN METER MODEL: MW600 Smart DO Meter PROBE PREPARATION: The meter is supplied with a 9V battery. Slide off the battery compartment cover on the back of the
OxyGuard. Dissolved Oxygen Probe
OxyGuard Dissolved Oxygen Probe Standard type USER MANUAL D02 Standard Probe manual gb 0903 CONTENTS 1. DESCRIPTION 1.1 The OxyGuard Probe... 1 1.3 Which kind of transmitter can be used with the OxyGuard
OPERATION MANUAL. Pen type, separate electrode SOIL PH METER Model : PH-220S
Pen type, separate electrode SOIL PH METER Model : PH-220S Your purchase of this SOIL PH METER marks a step forward for you into the field of precision measurement. Although this METER is a complex and
Trace Dissolved Oxygen Sensor
Instruction Sheet PN 51A-499ATRDO/rev.G September 2010 Model 499A TrDO Trace Dissolved Oxygen Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION
Resolution selectable from 0.01 and 0.001 ph. Range -2.000 16.000 ph. Accuracy ± 0.002 ph
ph EC DO ph Resolution selectable from 0.01 and 0.001 ph Range -2.000 16.000 ph Accuracy ± 0.002 ph Data logging Manual log on demand manual log on stability Interval logging Temperature readout ( C or
VISIFERM DO. Optical Oxygen Sensors with Integrated Transmitter THE MEASURE OF EXCELLENCE
VISIFERM DO Optical Oxygen Sensors with Integrated Transmitter R THE MEASURE OF EXCELLENCE TM VISIFERM DO: intelligent, optical, dissolved-oxyg Optical oxygen measurement with built-in analyzer, in 12
TB2CS Conductivity sensor 2-Electrode. Superior accuracy in low level conductivity measurement ranges
Data sheet TB2CS Conductivity sensor 2-Electrode Superior accuracy in low level conductivity measurement ranges Measurement range from 0 to 199.9 µs/cm and 0 to 19.99 ms/cm Resolution to 0.001 µs/cm in
A full spectrum of custom cables
A full spectrum of custom cables pms A full spectrum of custom cables Wilcoxon builds cables to your specifications and our exacting standards Industrial process Predictive maintenance Condition based
Retractable Housings. InTrac 781 / 784 Versatile and Rugged For the Toughest Process Conditions INGOLD
INGOLD Leading Process Analytics Retractable Housings InTrac Retractable Sensor Housings for Harsh Applications Wide Range of Options Intelligent Sensor Locking System Highly Efficient Sensor Cleaning
ELECTROCHEMISTRY. BOECO ELECTRODES The electrodes are not included with the ph meters and have to be ordered separately:
BOECO PORTABLE PH/ORP/TEMP METER MODEL PT-380 A Simultaneous displays ph or mv and temperature. A Convenient calibration with automatic buffer recognition of European and US buffer sets. Calibration data
Ozone Sensor. Model 499A OZ CAUTION CAUTION. Instruction Sheet PN 51A-499AOZ/rev.F January 2007
Instruction Sheet PN 51A-499AOZ/rev.F January 2007 Model 499A OZ Ozone Sensor For additional information, please refer to the Instruction Manuals CD shipped with this product, or visit our website at www.emersonprocess.com/raihome/liquid/.
Solenoid Valve Island Type 3965
Solenoid Valve Island Type 365 for the control of pneumatic actuators General The Type 365 Solenoid Valve Island is a compact solution for the centralized control of pneumatic actuators in chemical and
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
Direct Measurement Method Method 8157 0 to 20.0 mg/l (or 0 to 200% saturation) O 2 Clark-type Amperometric Sensor
Oxygen, Dissolved DOC316.53.01241 Direct Measurement Method Method 8157 0 to 20.0 mg/l (or 0 to 200% saturation) O 2 Clark-type Amperometric Sensor Scope and application: For water, wastewater and process
DISSOLVED OXYGEN METER Model : DO-5509
DISSOLVED OXYGEN METER Model : DO-5509 Your purchase of this DISSOLVED OXYGEN METER marks a step forward for you into the field of precision measurement. Although this DISSOLVED OXYGEN METER is a complex
Relative and absolute pressure switch type 529
Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20
MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter
Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases
User's Manual. Heavy Duty Dissolved Oxygen Meter Model 407510
User's Manual Heavy Duty Dissolved Oxygen Meter Model 407510 Introduction Congratulations on your purchase of Extech's Heavy Duty Dissolved Oxygen / Temperature Meter which simultaneously displays Dissolved
Incubator with mechanical convection
BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,
Differential-Hall-Effect based Sensors Series A5S
Speed and Frequency Seite 1 von 6 Differential-Hall-Effect based Sensors Series A5S Outstanding Characteristics Speed range covering most demands: from close to zero up to 25,000 pulses/second (response
Typical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
Mass Flow Meters & Controllers
HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2% of Full Scale) 0-5 VDC or 4-20
For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/.
Instruction Sheet PN 51A-499AOZ/rev.H September 2010 Model 499A OZ Ozone Sensor For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/. CAUTION SENSOR/PROCESS APPLICATION
General Purpose ph/orp Sensors
General Purpose ph/orp Sensors Product Data Sheet LIQ_PDS_3900 / Rev. F December 2014 General Purpose ph/orp Sensors SMART preamplifier-stores calibration and other data. Extended sensor life provided
STANDARD OPERATING PROCEDURE Dissolved Oxygen Measurement, Meter Calibration and Maintenance
Page 1 of 9 KEY WORDS- Dissolved Oxygen, calibration, probe preparation, meter preparation APPROVALS APPROVED BY: Kean S. Go, DATE: +/?? APPROVED BY: A Pement DATE: a// A/? f Lisa Ross, EHAP Senior Scientist
Cajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
Assisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
SenTix 950 SenTix 980
SenTix 950 SenTix 980 ph combination electrodes with refillable liquid reference system Operating manual ba75843e01 08/2009 SenTix The latest version of the present operating manual can be found on the
Amphenol Fiber Systems International
Amphenol Fiber Systems International TACBeam M83526/20 & /21 Qualified Expanded Beam Rugged Fiber Optic Connectors M83526/20 qualified AFSI TACBeam rugged fiber optic connector About the TACBeam Connector
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Heating oven with mechanical convection
FD series 53 Drying ovens / Heating ovens Heating oven with mechanical convection A BINDER FD series heating oven is always used when fast drying and sterilization is required. Thanks to its fully homogeneous
The Unique Accelabar Flow Meter
The Unique Accelabar Flow Meter The Accelabar is a new and unique flow meter that combines two differential pressure technologies to produce operating ranges never before attainable in a single flow meter.
Safety at a high level!
SIKA Level Switch SIKA Level Switch Safety at a high level! Convincing Advantages easy and reliable method to monitor fluid levels proven float principle easy side installation using threads ¾" or ½" BSP
Vehicle Brake System Monitoring 2-wire, 4-20 ma option; Intrinsic Safety Approval to E Exia IIC T4 (Tamb=60 C) BASEEFA, CENELEC EN50-020
Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and vibration resistant
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx
Ferrostat Speed Sensor Series DSF Explosion Proof Versions EEx DSF..10.**.HV Ex ATEX Operating Instructions 374E-64368 Valid from lot nr. 0103 General Function Use in potentially explosive environment
VE 210. Velocity transducer for low-frequency measurements. » From the Vibro-Meter product line» Low-frequency compensation allows frequency
for low-frequency measurements FEATURES» From the Vibro-Meter product line» Low-frequency compensation allows frequency response down to 0.5 Hz ( 3 db)» Voltage or current modulated output signal» No need
PMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features
Features Applications The PMP 4000 Series provides a complete range of high level voltage output pressure transducers offering advanced levels of measurement accuracy, stability and flexibility from a
Heating oven with mechanical control
ED series 53 Drying ovens / Heating ovens Heating oven with mechanical control The strength of the BINDER ED series heating oven: routine drying and sterilization applications up to 300 C (572 F). Thanks
www.suco.de Electronic Pressure Monitoring New Products
Electronic Pressure Monitoring New Products RoHS compliant Electronic Pressure Switches SoS-Technology with one or two switching functions Electronic Pressure Switches CE marking SUCO Electronic pressure
Climate chamber with illumination
KBWF series (E5.2) Climate chambers with illumination Climate chamber with illumination The BINDER climate chamber with illumination of the KBW series achieves homogeneous light distribution with its natural
DissolvedOxygenMonitor
Call 800.959.0299 to speak with a sales representative or visit us on the web at www.analyticaltechnology.com DissolvedOxygenMonitor Model Q46D Dissolved Oxygen Monitoring is critical to stable operation
Improving Temperature Measurement to Optimize Inventory Control and Custody Transfer Systems
Improving Temperature Measurement to Optimize Inventory Control and Custody Transfer Systems The measurement of temperature is critical in the determination of the true volume of product in a hydrocarbon
User's Guide. ExStik DO600. Dissolved Oxygen Meter RECALL. Dissolved Oxygen DO600
User's Guide ExStik DO600 Dissolved Oxygen Meter II RECALL Dissolved Oxygen DO600 Introduction Congratulations on your purchase of the ExStik DO600 dissolved oxygen / temperature meter which simultaneously
BM SERIES WAVE COMPACT 6.3 GHZ CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz)
CW SERIES PULSE RADAR LEVEL INSTRUMENTS (6.3 GHz) DESCRIPTION The Radar Level Meters of BM COMPACT WAVE 6.3 GHz series are excellent devices for no contact level measurement. The microwave impulses, emitted
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
Electronic Pressure Switch EDS 300
Electronic Pressure Switch EDS 300 User manual Page 2 of 16 Content 1. Functions of the EDS 300...3 2. Mounting...3 3. Operating keys on the membrane keypad...4 4. Digital display...4 5. Output function...5
Models SFP33 & SFP32 Pressure Transmitters
SFP33 Flow-Through Pressure Transmitter SFP32 Single-Ended Pressure Transmitter DS-PR-SFP-eng April, 2016 Data Sheet Models SFP33 & SFP32 Pressure Transmitters Pressure Brooks Seal Free Pressure Measurement
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
Product Data. Model 575 Series Submersible Level Transmitters ELECTRONIC PRESSURE MEASUREMENT PRODUCTS DESCRIPTION FEATURES APPLICATIONS
EPP - 1 DECRIPTION The odel 575 is used in general water/wastewater applications. The transmitter is offered in a standard non-clogging snub nose end, flush diaphragm or protected flush diaphragm with
LED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow)
Thermal flow sensors TA10-ZG8c and TA10-ZG9c for exact and stable, long-term measuring of lower flow velocities (Laminar Flow) Drawing 8c Drawing 9c U391_TA10C_DoP_e_150421 www.hoentzsch.com 1 of 5 Measured
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
COMBIMASS. Technical Data COMBIMASS eco-bio +
COMBIMASS Technical Data THE SYSTEM COMBIMASS The field transmitters of the COMBIMASS eco series are suitable for gas flow measurement and cover a wide range of different applications. The instruments
Application Guide to RF Coaxial Connectors and Cables
Application Guide to RF Coaxial Connectors and Cables By: Michael J. Hannon Product Applications Engineer and Pat Malloy, Sr. Applications Engineer There is a wide variety of coaxial connectors and cables
Dimensions. LUC-M20 with F12 housing and process connection 2" approx. 86 AF60 G2 2 NPT Ø50. Additional dimensions see section dimensions.
Dimensions LUC-M20 with F12 housing and process connection 2" approx. 86 65 78 Ø129 150 AF60 85 G2 2 NPT 22 ~148 Ø50 ~83 Additional dimensions see section dimensions. Features Quick and simple commissioning
Material test chamber with mechanical convection
FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and
Replacing Displacers with Guided Wave Radar
ROSEMOUNT GUIDED WAVE RADAR Replacing Displacers with Guided Wave Radar KEY POINTS Mounting flanges vary by displacer supplier Probe must extend the of the displacer chamber Single rigid probes are the
mpm DIN 43650 CONNECTORS
mpm DIN 43650 CONNECTORS : Highest quality, robust connectors for hydraulic and pneumatic electromechanical devices Broad offering of DIN 43650 connectors and devices Combined Brad and mpm cordsets : Provide
FLEXIBLE SOLUTIONS FOR FLUIDS AND GASES
FLEXIBLE SOLUTIONS FOR FLUIDS AND GASES www.amnitec.nl AmniTec B.V., Rotterdam, is part of a group of companies called United Flexible with an annual turnover of $ 70 Million and 5 operating facilities
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Instruction Manual HI 9146. Portable Waterproof Microprocessor Dissolved Oxygen Meter
Instruction Manual HI 9146 Portable Waterproof Microprocessor Dissolved Oxygen Meter w w w. h a n n a i n s t. c o m Dear Customer, Thank you for choosing a Hanna Product. Please read this instruction
Milwaukee USER MANUAL. Milwaukee. Smart DO Meter PORTABLE DISSOLVED OXYGEN METER MODEL: SM600. Authorized Dealer: ISMIL600 11/01
Milwaukee Milwaukee USER MANUAL PORTABLE DISSOLVED OXYGEN METER MODEL: SM600 Smart DO Meter Authorized Dealer: ISMIL600 11/01 PROBE PREPARATION: The meter is supplied with a 9V battery. Slide off the battery
Combustion Dynamics Instrumentation
www.imi-sensors.com Combustion Dynamics Instrumentation For the Most Demanding Gas Turbine Measurement & Monitoring Requirements IMI Sensors: A Leader in Combustion Measurement & Gas Turbine Monitoring
Instructions Manual. Electromagnetic sensor Series FLOMID FX. instrumentation for fluids. R-MI-FlomidFX Rev.: 0 English version
instrumentation for fluids Electromagnetic sensor Series FLOMID FX Instructions Manual! Conforms with the Pressure Equipment Directive 97/23/EC. 0830 This equipment is considered as being a pressure accessory
Roxar Electrical Resistance (ER) Probes 2 Retrievable System
Roxar Retrievable ER Probes FA-T218-A Product Data Sheet 06.07.2015 Roxar Electrical Resistance (ER) Probes 2 Retrievable System High Accuracy ER Probes Corrosion is a serious industrial problem, and corrosion
Quick Connect. RTDs, Cordsets and Transmitter with M12 Connections
Quick Connect RTDs, Cordsets and Transmitter with M12 Connections 1 Temperature Measurement Experts Since 1960, urns Engineering has been an industry leader in the design and manufacture of temperature
Torque Transducers MEASURING ELECTRONIC
Screwdriving technology Automation Air motors Air tools MEASURING ELECTRONIC Torque Transducers In most situations, the essential element of screwdriving technology is torque. Controlling the torque generated
Electromagnetic Flow Meter
Electromagnetic Flow Meter Description The EL 2200 series of electromagnetic sensors represent the state of the art for the accurate measurement for water cycle and process applications. Flow meters are
Description. Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers
Specifications and Ordering Information 330400 and 330425 Accelerometer Acceleration Transducers R Description These accelerometers are intended for critical machinery applications where casing acceleration
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
How To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
Our full line of JS Popper test products enables you to monitor circuits without taking them offline
PRODUCT CATALOG JS Popper by Mueller Electric Our full line of JS Popper test products enables you to monitor circuits without taking them offline Complete Line of Test Products Insulation Piercing Test
Industrial circular connectors
Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES
GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
9000 Series Accelerometers Specifications
Technical Data 9000 Series Accelerometers Specifications Catalog Numbers EK-43781I, EK-43782I, EK-46255I, EK-45890I, EK-43784I, EK-47086I, EK-43792I, EK-47090I, EK-43799I, EK-43794I, EK-43795I, EK-43797I,
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
LED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
RTD Temperature Probe for the Food/Pharmaceutical Industry
sales@jumo.co.uk Data Sheet 902810 Page 1/9 RTD Temperature Probe for the Food/Pharmaceutical Industry For temperatures between -50 and +250 C Protection type up to IP69 according to DIN EN 60529 (IP69K
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
RPS 8000. High Accuracy Resonant Pressure Sensor. GE Measurement & Control Solutions. Features:
GE Measurement & Control Solutions RPS 8000 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in
HygroClip 2 (HC2) Humidity Temperature Probes User Guide
Page 1 of 29 Probes User Guide Page 2 of 29 Table of contents 1 Overview...3 1.1 Hardware and software compatibility...3 2 Models...4 3 General description...11 3.1 Power supply...11 3.2 Measured parameters...11
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
EMC Test Chamber Solutions RF Cable Assemblies and Connectors
EMC Test Chamber Solutions RF Cable Assemblies and Connectors RF CABLE ASSEMBLY AND CONNECTOR SOLUTONS FOR EMC MMUNTY AND EMSSON COMPLANCE TESTNG E X T N T R A T E D E P T H --> POWER LEVEL: -40.00 dbm
Control- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
Pipe Temperature Sensors
Pipe Temperature Sensors Model TE-703 / 704 RoHS Four immersion thermowell installation options brass adapter with 304 SS probe for adjustable insertion, plastic, galvanized steel or NEMA-4/IP-65 steel