LED Drivers For Lighting
|
|
|
- Lesley Hicks
- 9 years ago
- Views:
Transcription
1 LED Drivers For Lighting Dongwoon Anatech First Technology & Best Quality
2 Product Line Up 구분 P/N Function PKG 비고 Linear DC/DC Buck DW8501 DW8502 DW8505A DW8506 DW8520 DW8522 DW8525 DW8527 TO-252 SOT-223 TO-263 SOT-23 SOT-23 8-SOIC 8-SOIC 6 TDFN 8-SOIC 8-SOIC New Product PFC DW8528 Operating 10.3~36V UVLO 6.5V Hysteresis Power Limit FOP Low Vcs Voltage PF THD Reshaper LOW Startup Q-Current 8-SOIC New Product CV/CC DW SOIC New Product
3 DW850x : Linear type, LED Driver IC The DW850X series are linear LED drivers for low/medium/high power LEDs. The DW850X series realize constant current driver ICs with simple circuit design. The DW850X provide cost-effective solutions for LED light bulbs, fluorescent lamp, street light, signage and decorative LED lighting, general lighting of flat panel displays, RGB backlighting, current stabilizer with DC/DC or AC/DC, general purpose constant current source DW8501 DW8502 DW8505A DW8506 Vin (min/max(v)) 5V to 40V 5V to 40V 5V to 40V 6.5V to 40V Output Current(mA) Up to 1.5A adjustable Up to 2.5A adjustable Up to 100mA adjustable Up to 100mA adjustable Dropout Voltage ILED=300mA Max. ILED=1A Max. ILED=60mA Max. ILED=50mA Dimming PWM PWM PWM - Protection Function Thermal derating Thermal derating Thermal derating Thermal derating Options Typical application circuit SOT223-5L(6.5 x 3.5 x 1.8) TO252-5L(6.5 x 5.5 x 2.3) Vin = 5 ~ 40Vdc PWM EN VCC VIN DW8501 OUT 1.5A TO263-5L (10.16x15.35x4.57) Vin = 5 ~ 40Vdc PWM EN VCC VIN DW8502 OUT 2.5A Vin = 5 ~ 40Vdc PWM SOT23-5L (2.9 x 2.8 x 1.45) EN VCC VIN DW8505A OUT 100mA SOT23-5L (2.92 x 2.8 x 1.3) RS RS RS Rs GND Rs GND Rs GND
4 DW8520/22/25/35 : DC-DC type, LED Driver IC The DW8520/22/25/35 series are the step-down constant-current high-brightness LED drivers. x DW8520 DW8522 DW8525 DW8535 Topology Buck Hysteretic buck Buck 2-Channel Hysteretic Buck Efficiency up to 90% up to 97% up to 96% Up to 95% Input Voltage 9V~450V 4.5~40V 6V~35V 6.5V~60V Quiescent Current Switching Frequency Typical 0.5mA Typical 1.0mA Typical 1.2mA Typical 3mA Constant frequency or constant off-time operation Up to 2MHz Fixed 300kHz Up to 2MHz Dimming PWM and Analog PWM and Analog - PWM and Analog Protection Function Thermal shutdown Thermal derating, Thermal shutdown Thermal derating, Thermal shutdown Thermal derating Accuracy 10% 5% 5% 2.5% FET External Internal External Option 8 SOIC(4.9 x 6.0 x 1.4) 6 TDFN(3.0 x 3.0 x 0.75) 8 SOIC(4.9 x 6.0 x 1.4) 16 SOIC(6 x 9.9 x 1.75) Vs Cin VIN : 4.5V ~ 40V Typical application circuit VREG AD OUT PWM DW8520 IN Dimming Sense OUT RT GND CS Rs VDD GND
5 DW8527/28 : Primary PFC IC The DW8527/28 series are active boundary-mode power factor correction controller for AC-DC SMPS applications. x DW8528 DW8527 Topology PFC IC PFC IC VCC Operating Voltage 10.3V ~ 36V 10.3V ~ 22V VCC Hystersis 6.5V 2.5V Vcs Sensing Voltage 0.8V 0.8V FET External External AC High Voltage Input THD/PF High Performance THD/PF - Soft Start - Adjusted Soft Start time Protection Function Thermal shutdown, Feed back Open Protection Option 8 SOIC(4.9 x 6.0 x 1.4) Thermal shutdown 8 SOIC(4.9 x 6.0 x 1.4) Typical application circuit
6 DW8508 : CC/CV with Dimming Controller The DW8508 is CC/CV( Constant Current & Constant Voltage ) IC for stable LEDs driving in a secondary side. x DW8508 Topology Dual Opamp VCC Operating Voltage 8V ~ 36V Opamp Sink Diode No need Dimming Analog / PWM 0-10 Dimming Good Implementation 0 Dimming No Flicker Protection Function OVP, LED Open, LED short, Thermal Protection Option 8 SOIC(4.9 x 6.0 x 1.4) Typical application circuit
7 DW8500 : Linear type, Middle power LED Driver IC - 5V to 40V Supply voltage - Regulated output current 300mA fixed - Low dropout voltage : Max. ILED=300mA - Built-in thermal derating circuit - Thermal enhanced package SOT89-3L - LED light bulbs - Signage and decorative LED lighting - General lighting of flat panel displays - RBG backlighting - Current stabilizer with DC/DC or AC/DC - General purpose constant current source DW8500 SOT-89 (4.5 mmx 2.45mm x 1.5mm)
8 DW8501 : Linear type, High power LED Driver IC - 5V to 40V Supply voltage - Regulated output current up to 1.5A adjustable - Low dropout voltage : Max. ILED=1A - Built-in thermal derating circuit - Available PWM dimming control - Thermal enhanced package SOT223-5L, TO252-5L - LED light bulbs - Signage and decorative LED lighting - General lighting of flat panel displays - Automotive - RBG backlighting - Current stabilizer with DC/DC or AC/DC - General purpose constant current source SOT-223 (6.5mm x 3.5mm x 1.8mm) TO-252 (6.5mm x 5.5mm x 2.3mm)
9 DW8502 : Linear type, High power LED Driver IC - 5V to 40V Supply voltage - Regulated output current up to 2.5A adjustable - Low dropout voltage : Max. ILED=1A - Built-in thermal derating circuit - Available PWM dimming control - Thermal enhanced package TO263-5L, TO220-5L - LED light bulbs - Signage and decorative LED lighting - General lighting of flat panel displays - Automotive - RBG backlighting - Current stabilizer with DC/DC or AC/DC - General purpose constant current source TO-263 (10.1mm x8.4mm x 4.6mm) TO-220 (10.26mm x28.85mm x 4.57mm)
10 DW8505A : Linear type, Low power LED Driver IC - 5V to 40V Supply voltage - Regulated output current up to 100mA adjustable - Low dropout voltage : Max. ILED=60mA - Built-in thermal derating circuit - Available PWM dimming control - Thermal enhanced package SOT23-5L - LED light bulbs - Signage and decorative LED lighting - General lighting of flat panel displays - Automotive - RBG backlighting - Current stabilizer with DC/DC or AC/DC - General purpose constant current source SOT23-5 (2.9mmx2.8mmx0.7mm)
11 DW8506 : Linear type, Low power LED Driver IC - 6.5V to 40V Supply voltage - Regulated output current up to 100mA adjustable - Low dropout voltage : Max. ILED=50mA - Built-in thermal dereting circuit - Thermal enhanced package SOT23-5L - LED light bulbs - Signage and decorative LED lighting - General lighting of flat panel displays - RBG backlighting - Current stabilizer with DC/DC or AC/DC - General purpose constant current source SOT23-5 (2.9mmx2.8mmx0.7mm)
12 DW8520 : Universal High power LED Driver IC - 9V to 450V supply voltage - Buck converter topology LED drivers - Internal zener regulator - Constant frequency or constant off-time operation - Linear and PWM dimming capability - Open loop peak current controller - High efficiency up to 90% - Thermal enhanced package SOIC-8 - DC/DC or AC/DC LED driver applications - Signage and decorative LED lighting - General lighting of flat panel displays - RGB backlight - General purpose constant current source - Bulb light 8 SOIC (4.9mm x 6.0mm x 1.4mm)
13 DW8522 : High Speed/Performance LED Driver IC - 4.5V to 40V Input voltage range - Hysteretic buck control : Low parts count - Single pin On/Off and brightness control Using DC voltage and PWM - Thermal derating function - 20KHz maximum dimming PWM frequency - Up to 2MHz switching frequency - ±2.5% LED current accuracy - Thermal enhanced package SOIC-8, TDFN-6 - MR16, PAR, L-Tube Lighting - Offline LED lamps and fixtures - Signage and Decorative lighting - General purpose LED lighting 6 TDFN (3mm x 3mm x 0.75mm) 8 SOIC EP (4.9mm x 6.0mm x 1.4mm) 6 TDFN 8 SOIC
14 DW8525 : 1A Buck Converter LED Driver IC - 6V to 35V supply voltage - Buck converter topology LED drivers - 1.0A Output current - Internal high-side switch - Fixed 300kHz internal oscillator - Thermal shutdown and short-circuit protection - Thermal enhanced package SOIC-8 - MR16 Lighting - Offline LED lamps and fixtures - Signage and Decorative lighting - General purpose LED lighting 8 SOIC EP (4.9mm x 6.0mm x 1.4mm)
15 DW8527 : Primary PFC IC - Transition mode PFC controller - All of LED lighting - Multiplier with Improved power factor and THD - AC Input LED Lighting - Ultra low start-up (30uA) / Quiescent current (2.5mA) - In / Outdoor Lighting, Street, Roadway, - On chip filter on current sense Parking, Construction Lamp mA/+800mA Totem pole gate driver - Built-In protection (Soft-Start, OVP, UVLO, Feedback Open) - Open load regulation -2 nd detect by comp voltage Vcomp=low : No load, OVP Vcomp>4V : Load open, FB-GND Short - Zero current switching for low power consumption 8 SOIC (4.9mm x 6.0mm x 1.4mm)
16 DW8528 : Primary PFC IC - Wide operating range of VCC (9.5~36V) - Boundary mode PFC control - Improved power factor and THD - Extremely low startup low quiescent current - On chip filter on current sense - Disable function on ZCD pin mA/+800mA Totem pole gate driver - Under voltage lock out - Output over voltage protection - Thermal shutdown protection - VCC over voltage protection (VCC>40V) - Feedback open protection - All of LED lighting - AC Input LED Lighting - In / Outdoor Lighting, Street, Roadway, Parking, Construction Lamp 8 SOIC (4.9mm x 6.0mm x 1.4mm)
17 DW8508 : CC/CV with Dimming Controller - Constant current & Constant voltage Driving - Wide range operating voltage (8V~30V) - Built in 5V Regulator - PWM/Analog Dimming Control : 0V ~ 10V Dimming (0V LED No flicker ) - Thermal derating function - Built in Protection circuit (LED Open/Short) - Low feedback voltage (0.3V) - Thermal enhanced package SOIC-8 - All of LED lighting - AC Input LED Lighting - In / Outdoor Lighting, Street, Roadway, Parking, Construction Lamp 8 SOIC (4.9mm x 6.0mm x 1.4mm)
18 DW8535 : High Speed/Performance 2CH LED Driver IC - 6.5V to 60V Input voltage range - 2-Channel hysteretic buck control - +/-2.5% LED Current accuracy - Up to 95 % efficiency - Analog and PWM dimming simultaneously - Various fault detection or protection function (LED open/short, Temperature, TSD) - Up to 2MHz switching frequency - Over temperature derating (30%) - Offline LED lamps and fixtures - Signage and Decorative lighting - General purpose LED lighting - LED Streetlights - LED Flat Panel Lighting 16 SOIC (10mm x 6.2mm x 1.75mm)
19 Customers (Driver for LED Lighting)
20 LED 마스터Lighting 제목 스타일IC 편집Roadmap Linear Primary DC/DC 비절연 buck with PFC(SOT-23) 1-CH Buck IC External FET OCP, OVP, OCP, OVP, Analog / PWM Analog / PWM 60V Linear IC 60V 4CH Linear IC AC step driver PFC + PSR IC MR16 + Triac Buck- Boost IC MCU + Buck IC 1-CH 60V Buck IC External FET Internal FET 3Q 4Q 1Q 2Q 3Q 4Q
DW8501 High Power LED Driver
Descriptions The is an instant On/Off LED driver for high power LED applications. At output stage, one regulated current port is designed to provide a uniform and constant current sink for driving LEDs
High Power LED Driver Series User s Guide
High Power LED Driver Series User s Guide 2004-2010 Sure Electronics Inc. LE-LL15113-LE-LL14113_Ver1.0 Table of Contents Chapter 1. Overview...1 1.1 Overview... 1 1.2 Features... 2 1.3 Applications...
LD7550-B. Green-Mode PWM Controller. General Description. Features. Applications. Typical Application. REV: 01a 12/22/2006 LD7550-B
12/22/2006 REV: 01a Green-Mode PWM Controller General Description The LD7550-B is a low cost, low startup current, current mode PWM controller with green-mode power-saving operation. The integrated functions
28V, 2A Buck Constant Current Switching Regulator for White LED
28V, 2A Buck Constant Current Switching Regulator for White LED FP7102 General Description The FP7102 is a PWM control buck converter designed to provide a simple, high efficiency solution for driving
National Semiconductor Power Products - Seminar 3 (LED Lighting)
National Semiconductor Power Products - Seminar 3 (LED Lighting) Dr. Iain Mosely Converter Technology Ltd. Slide 1 Overview Background on LEDs Power Electronics for Driving LEDs LED Driver Specific Solutions
Preliminary Datasheet
Features Macroblock Preliminary Datasheet 1.2A Constant Output Current 93% Efficiency @ input voltage 13V, 350mA, 9~36V Input Voltage Range Hysteretic PFM Improves Efficiency at Light Loads Settable Output
AC/DC Power Supply Reference Design. Advanced SMPS Applications using the dspic DSC SMPS Family
AC/DC Power Supply Reference Design Advanced SMPS Applications using the dspic DSC SMPS Family dspic30f SMPS Family Excellent for Digital Power Conversion Internal hi-res PWM Internal high speed ADC Internal
AC/DC Power Management Devices. 2015 Product Guide. AC/DC Control ICs with integrated MOSFETs in LLC, QR & PWM Topologies
AC/DC Power Management Devices 2015 Product Guide AC/DC Control ICs with integrated MOSFETs in LLC, QR & PWM Topologies About Us Headquarters Japan Sanken Electric Co., Ltd. is a Japanese company who s
LDS8720. 184 WLED Matrix Driver with Boost Converter FEATURES APPLICATION DESCRIPTION TYPICAL APPLICATION CIRCUIT
184 WLED Matrix Driver with Boost Converter FEATURES High efficiency boost converter with the input voltage range from 2.7 to 5.5 V No external Schottky Required (Internal synchronous rectifier) 250 mv
Series AMLDL-Z Up to 1000mA LED Driver
FEATURES: Click on Series name for product info on aimtec.com Series Up to ma LED Driver Models Single output Model Input Voltage (V) Step Down DC/DC LED driver Operating Temperature range 4ºC to 85ºC
IS32BL3554 BOOST TYPE LED DRIVER WITH 4-CHANNEL CURRENT SOURCE
ISBL BOOST TYPE LED DRIVER WITH -CHANNEL CURRENT SOURCE DESCRIPTION The ISBL is a white LED driver for backlight applications based on a highly efficient boost controller operating over a wide input voltage
Simple PWM Boost Converter with I/O Disconnect Solves Malfunctions Caused when V OUT <V IN
Simple PWM Boost Converter with I/O Disconnect Solves Malfunctions Caused when V OUT
LM 358 Op Amp. If you have small signals and need a more useful reading we could amplify it using the op amp, this is commonly used in sensors.
LM 358 Op Amp S k i l l L e v e l : I n t e r m e d i a t e OVERVIEW The LM 358 is a duel single supply operational amplifier. As it is a single supply it eliminates the need for a duel power supply, thus
Welcome to this presentation on Driving LEDs AC-DC Power Supplies, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we
Welcome to this presentation on Driving LEDs AC-DC Power Supplies, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at: - the typical circuit structure of AC-DC
1.5A Very L.D.O Voltage Regulator LM29150/29151/29152
FEATURES High Current Capability 1.5A Low Dropout Voltage 350mV Low Ground Current Accurate 1% Guaranteed Initial Tolerance Extremely Fast Transient Response Reverse-Battery and "Load Dump" Protection
CE8301 Series. Introduction. Features. Ordering Information. Applications SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER
SMALL PACKAGE PFM CONTROL STEP-UP DC/DC CONVERTER Introduction The is a CMOS PFM-control step-up switching DC/DC converter that mainly consists of a reference voltage source, an oscillator, and a comparator.
UNISONIC TECHNOLOGIES CO., LTD
UPS61 UNISONIC TECHNOLOGIES CO., LTD HIGH PERFORMANCE CURRENT MODE POWER SWITCH DESCRIPTION The UTC UPS61 is designed to provide several special enhancements to satisfy the needs, for example, Power-Saving
7-41 POWER FACTOR CORRECTION
POWER FTOR CORRECTION INTRODUCTION Modern electronic equipment can create noise that will cause problems with other equipment on the same supply system. To reduce system disturbances it is therefore essential
Together, we work as a team. www.eurotronix.com
AC DC Devices EasyPowerTM MP150 MP155 MP156 MP157 MP100 MP100 MP100L MP103 MP103 MP100L Product Portfolio 1W to 400W AC Input EMI Filter Output + LLC + SR Controller MP6922 MP44022A MP44011 AC Input EMI
FAN5346 Series Boost LED Driver with PWM Dimming Interface
FAN5346 Series Boost LED Driver with PWM Dimming Interface Features Asynchronous Boost Converter Drives LEDs in Series: FAN5346S20X: 20V Output FAN5346S30X: 30V Output 2.5V to 5.5V Input Voltage Range
Application Note TMA Series
1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x
New high-power LED driver
New high-power LED driver Start with the LED brightness control LED brightness depends on the current high or low, while for the same color LED, they have the same currency but the different forward voltage.
400KHz 60V 4A Switching Current Boost / Buck-Boost / Inverting DC/DC Converter
Features Wide 5V to 32V Input Voltage Range Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response 1.25V reference adjustable
Lighting Segment March 2010. www.fairchildsemi.com
LED Lighting Solutions Lighting Segment March 2010 www.fairchildsemi.com 1 Agenda 1. Introduction 2. Low Power AC/DC conversion with minimum component count => Primary Side Regulation 3. PFC topologies
UNISONIC TECHNOLOGIES CO., LTD UC3863 LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD UC3863 LOW COST POWER-SAVING MODE PWM CONTROLLER FOR FLYBACK CONVERTERS DESCRIPTION The UC3863 is a high performance current mode PWM controller ideally suited for low standby
Push-Pull FET Driver with Integrated Oscillator and Clock Output
19-3662; Rev 1; 5/7 Push-Pull FET Driver with Integrated Oscillator General Description The is a +4.5V to +15V push-pull, current-fed topology driver subsystem with an integrated oscillator for use in
1ED Compact A new high performance, cost efficient, high voltage gate driver IC family
1ED Compact A new high performance, cost efficient, high voltage gate driver IC family Heiko Rettinger, Infineon Technologies AG, Am Campeon 1-12, 85579 Neubiberg, Germany, [email protected]
WHITE LED STEP-UP CONVERTER. Features
General Description The is an inductor-based DC/DC converter designed to drive up to eight white LEDs in series for backlight. Only one feedback resistor is needed to control the LED current and obtain
Application Note AN-1073
Application Note AN-073 Analysis of Different Solutions and Trade-off Cost vs. Power Factor Performance for Electronic Ballasts By Cecilia Contenti Table of Contents Page I. Introduction II. Low Power
3-Phase Synchronous PWM Controller IC Provides an Integrated Solution for Intel VRM 9.0 Design Guidelines
3-Phase Synchronous PWM Controller IC Provides an Integrated Solution for Intel VRM 9.0 Design Guidelines Odile Ronat International Rectifier The fundamental reason for the rapid change and growth in information
LED Solutions for LCD Backlighting
LED Solutions for LCD Backlighting LED Solutions for LCD Backlighting LED Driver ICs Best Performance System know-how LED Appl. Power Savings Applications flexibilitiy ST Position: #1 in Lighting Segment*
High Frequency True PWM Dimming White LED Driver MP3304 and MP3305
The Future of Analog IC Technology AN021 High Frequency True PWM Dimming White LED Driver MP3304 and MP3305 High Frequency True PWM Dimming White LED Driver MP3304 and MP3305 Prepared by Zhijun Ye and
MP2259 1A, 16V, 1.4MHz Step-Down Converter
MP59 1A, 1V, 1.MHz Step-Down Converter TM The Future of Analog IC Technology DESCRIPTION The MP59 is a monolithic integrated stepdown switch mode converter with an internal power MOSFET. It achieves 1A
NCP1612. Enhanced, High-Efficiency Power Factor Controller
Enhanced, High-Efficiency Power Factor Controller The NCP1612 is designed to drive PFC boost stages based on an innovative Current Controlled Frequency Fold back (CCFF) method. In this mode, the circuit
TYPICAL APPLICATION CIRCUIT. ORDER INFORMATION SOP-EP 8 pin A703EFT (Lead Free) A703EGT (Green)
www.addmtek.com 2 CHANNELS 150mA HIGH VOLTAGE ADJUSTABLE CURRENT REGULATOR DESCRIPTION A703 is a high voltage, adjustable constant current driver for LED applications. Two regulated current ports are designed
LM5001 High Voltage Switch Mode Regulator
High Voltage Switch Mode Regulator General Description The LM5001 high voltage switch mode regulator features all of the functions necessary to implement efficient high voltage Boost, Flyback, SEPIC and
AP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
1.5A ASYNCHRONOUS DC-DC BUCK CONV
General Description The is a 1.4MHz fixed frequency, current mode, PWM buck (step-down) DC-DC converter, capable of driving a 1.5A load with high efficiency, excellent line and load regulation. The device
Solar Powered LED Street Lighting
Solar Powered LED Street Lighting Solar Powered LED Street Lighting Courtesy of BetaLighting 2 Agenda Trends for solar powered LED street lighting Regulating voltage out of a solar panel Application overview
FEBFL7701_L30U003A. 2.4W LED Ballast Using FL7701. Featured Fairchild Product: FL7701
User Guide for FEBFL7701_L30U003A 2.4W LED Ballast Using FL7701 Featured Fairchild Product: FL7701 Direct questions or comments about this evaluation board to: Worldwide Direct Support Fairchild Semiconductor.com
Altoran Chip & Systems ACS1004 ACS1004. Compact Direct AC Line LED Driver with high PF and low THD using Only Two External Components FEATURES
ACS1004 Compact Direct AC Line LED Driver with high PF and low THD using Only Two External Components FEATURES AC Mains Direct LED Driver with Only Two External Components Wide AC Input Range : 90~280VAC
SPI-8001TW. Switching Regulators. Dual 1.5 A, DC/DC Step-Down Converter. SANKEN ELECTRIC CO., LTD. http://www.sanken-ele.co.jp/en/
Data Sheet 27469.301.1 Designed to meet high-current requirements at high efficiency in industrial and consumer applications; embedded core, memory, or logic supplies; TVs, VCRs, and office equipment,
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
TS321 Low Power Single Operational Amplifier
SOT-25 Pin Definition: 1. Input + 2. Ground 3. Input - 4. Output 5. Vcc General Description The TS321 brings performance and economy to low power systems. With high unity gain frequency and a guaranteed
Cool-Power PI33xx-x0. 8 V to 36 V IN Cool-Power ZVS Buck Regulator Family. Product Description. Features & Benefits. Applications. Package Information
Cool-Power PI33xx-x0 8 V to 36 V IN Cool-Power ZVS Buck Regulator Family Product Description The PI33xx-x0 is a family of high efficiency, wide input range DC-DC ZVS-Buck regulators integrating controller,
IR1168S DUAL SMART RECTIFIER DRIVER IC
Datasheet No PD97382 September 26, 2011 IR1168S DUAL SMART RECTIFIER DRIVER IC Features Secondary-side high speed controller for synchronous rectification in resonant half bridge topologies 200V proprietary
Simple Control Circuits for Electronic Ballast Design. Abstract. 1. Overview. Tom Ribarich, International Rectifier, USA, tribari1@irf.
Simple Control Circuits for Electronic Ballast Design Tom Ribarich, International Rectifier, USA, [email protected] Abstract Electronic ballasts are designed to fulfill a variety of different input and
High Performance Current Mode PWM Controller Cycle Turning + POWER FROM LIEMIC. For, 2008 LIEMIC Semiconductor Co.,Ltd. LN3C63AD REV: 1.0.
LN3C63 High Performance Current Mode PWM Controller Cycle Turning + POWER FROM LIEMIC For, Adaptor & Charger Offline Power Supply Open Frame Power DVD&DVB Player Auxiliary Power for PC etc..... 2008 LIEMIC
Product by Category. Contents. Linear Regulator 4 Single Output 6 Dual Output 6 Multiple Output 6 DDR Terminator
OCTOBER 2009 Contents Product by Category Linear Regulator 4 Single Output 6 Dual Output 6 Multiple Output 6 DDR Terminator Switching Converter 6 Boost DC/DC Converter 8 Buck DC/DC Converter Switching
IS31LT3360 40V/1.2A LED DRIVER WITH INTERNAL SWITCH. January 2014
40V/1.2A LED DRIVER WITH INTERNAL SWITCH January 2014 GENERAL DESCRIPTION The IS31LT3360 is a continuous mode inductive step-down converter, designed for driving a single LED or multiple series connected
CAT4139. 22 V High Current Boost White LED Driver
22 V High Current Boost White LED Driver Description The CAT4139 is a DC/DC step up converter that delivers an accurate constant current ideal for driving LEDs. Operation at a fixed switching frequency
UC3842/UC3843/UC3844/UC3845
SMPS Controller www.fairchildsemi.com Features Low Start up Current Maximum Duty Clamp UVLO With Hysteresis Operating Frequency up to 500KHz Description The UC3842/UC3843/UC3844/UC3845 are fixed frequencycurrent-mode
Agenda. Introduction: NCP1631: a novel controller for interleaved PFC. Experimental results and performance. Conclusion
Interleaved PFC Introduction: Basics of interleaving Main benefits Agenda NCP1631: a novel controller for interleaved PFC Out-of-phase management The NCP1631 allows the use of smaller inductors Main functions
TDA4605 CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS
CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS Fold-Back Characteristic provides Overload Protection for External Diodes Burst Operation under Short-Circuit and no Load Conditions
Evaluating AC Current Sensor Options for Power Delivery Systems
Evaluating AC Current Sensor Options for Power Delivery Systems State-of-the-art isolated ac current sensors based on CMOS technology can increase efficiency, performance and reliability compared to legacy
Create Colorful and Bright LED Light with an LED Matrix Dimmer
Create Colorful and Bright LED Light with an LED Matrix Dimmer By Keith Szolusha, Applications Engineering Section Leader, Power Products, Linear Technology RGB LEDs are used in projector, architectural,
AP1506. 150KHz, 3A PWM BUCK DC/DC CONVERTER. Pin Assignments. Description. Features. Applications. ( Top View ) 5 SD 4 FB 3 Gnd 2 Output 1 V IN
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing the number of external
MP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6
MP2456 0.5A, 50V, 1.2MHz Step-Down Converter in a TSOT23-6 DESCRIPTION The MP2456 is a monolithic, step-down, switchmode converter with a built-in power MOSFET. It achieves a 0.5A peak-output current over
POWER FORUM, BOLOGNA 20-09-2012
POWER FORUM, BOLOGNA 20-09-2012 Convertitori DC/DC ad alta densità di potenza e bassa impedenza termica. Massimo GAVIOLI. Senior Field Application Engineer. Intersil SIMPLY SMARTER Challenges when Designing
CAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
Programmable Single-/Dual-/Triple- Tone Gong SAE 800
Programmable Single-/Dual-/Triple- Tone Gong Preliminary Data SAE 800 Bipolar IC Features Supply voltage range 2.8 V to 18 V Few external components (no electrolytic capacitor) 1 tone, 2 tones, 3 tones
NCL30002/D. Power Factor Corrected Buck LED Driver
NCL32 Power Factor Corrected Buck LED Driver The NCL32 is a switch mode power supply controller intended for low to medium power single stage power factor (PF) corrected LED Drivers. The device operates
AN-8019 Reliable USB Modem Design Using the Combination of an Integrated Load Switch and a Buck Converter
www.fairchildsemi.com AN-8019 Reliable USB Modem Design Using the Combination of an Integrated Load Switch and a Buck Converter Introduction In the portable electronics market, a wireless network allows
AND8480/D. CrM Buck LED Driver Evaluation Board APPLICATION NOTE
CrM Buck LED Driver Evaluation Board Prepared by: Fabien Franc ON Semiconductor Introduction This document describes the CrM Buck LED driver evaluation board. This board provides a step down converter
MP1541 1.3MHz Boost Converter
MP5.3MHz Boost Converter The Future of Analog IC Technology DESCRIPTION The MP5 is a 5-pin thin SOT3 current mode step up converter intended for small, low power applications. The MP5 switches at.3mhz
29V High Voltage LED Driver
29V High Voltage LED Driver SP7601 FEATURES Wide Input Voltage Range 4.5V 29V 1.2MHz Constant Frequency Operation Low 0.2V Reference Voltage Adjustable Overcurrent Protection PWM Dimming and Power sequencing
MIC33050. General Description. Features. Applications. Typical Application. 4MHz Internal Inductor PWM Buck Regulator with HyperLight Load
4MHz Internal Inductor PWM Buck Regulator with HyperLight Load General Description The Micrel is a high-efficiency 600mA PWM synchronous buck (step-down) regulator with internal inductor featuring HyperLight
Features. Applications
ISET RT EN CS CH2 CH 1 DIM COMP NEW PRODUCT FOUR-CHANNEL CURRENT SOURCE BOOST LED DRIVER Description Features The is a high efficiency boost controller with 4-string current sources for driving WLED backlight.
MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS
MC34063A MC34063E DC-DC CONVERTER CONTROL CIRCUITS OUTPUT SWITCH CURRENT IN EXCESS OF 1.5A 2% REFERENCE ACCURACY LOW QUIESCENT CURRENT: 2.5mA (TYP.) OPERATING FROM 3V TO 40V FREQUENCY OPERATION TO 100KHz
Power Management & Supply. Design Note. Version 1.0, Nov. 2001 DN-EVALMF2ICE2A265-1. CoolSET 35W DVD Power Supply with ICE2A265.
Version 1.0, Nov. 2001 Design Note DN-EVALMF2ICE2A265-1 CoolSET 35W DVD Power Supply with ICE2A265 Author: Harald Zöllinger Published by Infineon Technologies AG http://www.infineon.com Power Management
LM1084 5A Low Dropout Positive Regulators
5A Low Dropout Positive Regulators General Description The LM1084 is a series of low dropout voltage positive regulators with a maximum dropout of 1.5 at 5A of load current. It has the same pin-out as
UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
µpfc ONE CYCLE CONTROL PFC IC
Features PFC with IR proprietary One Cycle Control Continuous conduction mode (CCM) boost type PFC No line voltage sense required Programmable switching frequency (50kHz-200kHz) Programmable output overvoltage
Via dell' Industria, 25-31020 S. Vendemiano (TV) Tel. 0438 470047 Fax. 0438 470100 - www.elettrolab.it e-mail Acquisti@elettrolab.
EDB300 Electronic Digital Ballast 300W DSP controlled Features: Electronic digital ballast suitable for 300W HID lamps Built-in PFC (pf>0.98 90-260 Vac full range). EMI filter inside. Compact shape, low
SD4840/4841/4842/4843/4844
CURRENT MODE PWM CONTROLLER WITH BUILT-IN HIGH VOLTAGE MOSFET DESCRIPTION SD4840/4841/4842/4843/4844 is a current mode PWM controller with low standby power and low start current for power switch. In standby
MP2365 3A, 28V, 1.4MHz Step-Down Converter
The Future of Analog IC Technology MP365 3A, 8,.MHz Step-Down Converter DESCRIPTION The MP365 is a.mhz step-down regulator with a built-in Power MOSFET. It achieves 3A continuous output current over a
PAM2316. Description. Pin Assignments. Applications. Features. A Product Line of. Diodes Incorporated. 2.5MHz, FAST TRANSIENT 2A STEP-DOWN CONVERTER
2.5MHz, FAST TRANSIENT 2A STEP-DOWN CONVERTER Description Pin Assignments The is a 2A step-down sync converter. The 2.5MHz switching frequency enables the use of small external components. The ultra-small
Using voltage regulator to convert 5-12V range to 3.3V. Huan Lin
Using voltage regulator to convert 5-12V range to 3.3V Huan Lin 4/2/2010 1 Table of Contents 1. Introduction... Error! Bookmark not defined. 2. Objective... Error! Bookmark not defined. 3. Implementation...
NCP1650. Power Factor Controller
Power Factor Controller The NCP165 is an active, power factor correction controller that can operate over a wide range of input voltages, and output power levels. It is designed to operate on 5/6 Hz power
QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 994 THREE CHANNEL LED BALLASTER WITH PWM LT3003 DESCRIPTION
LT00 DESCRIPTION Demonstration circuit features the LT00 three channel LED ballaster with in a 0-lead MSOP thermally enhanced MSE package. The demonstration circuit is designed to ballast three channels
Pololu 5V, 600mA Step-Down Voltage Regulator D24V6F5
Pololu 5V, 600mA Step-Down Voltage Regulator D24V6F5 Pololu step-down voltage regulator D24VxFx next to a 7805 voltage regulator in TO-220 package. Overview These buck (step-down) voltage regulators generate
LM2576R. 3.0A, 52kHz, Step-Down Switching Regulator FEATURES. Applications DESCRIPTION TO-220 PKG TO-220V PKG TO-263 PKG ORDERING INFORMATION
LM2576 FEATURES 3.3, 5.0, 12, 15, and Adjustable Output ersions Adjustable ersion Output oltage Range, 1.23 to 37 +/- 4% AG10Maximum Over Line and Load Conditions Guaranteed 3.0A Output Current Wide Input
MPM3810. 6V Input, 1.2A Module Synchronous Step-Down Converter with Integrated Inductor DESCRIPTION FEATURES APPLICATIONS
The Future of Analog IC Technology MPM3810 6 Input, 1.2A Module Synchronous Step-Down Converter with Integrated Inductor DESCRIPTION The MPM3810 is a step-down module converter with built-in power MOSFETs
Spread Spectrum Clock Generator
Spread Spectrum Clock Generator DESCRIPTION is a clock generator for EMI (Electro Magnetic Interference) reduction. The peak of unnecessary (EMI) can be attenuated by making the oscillation frequency slightly
Welcome to this presentation on Switch Mode Drivers, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at:
Welcome to this presentation on Switch Mode Drivers, part of OSRAM Opto Semiconductors LED Fundamentals series. In this presentation we will look at: How switch mode drivers work, switch mode driver topologies,
CAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming
3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming Description The CAT419/CAV419 is a 3 channel constant current LED driver, requiring no inductor. LED channel currents up to 175 ma
HV start-up DCM/QR flyback controller with integrated DCM/QR PFC controller
HV start-up DCM/QR flyback with integrated DCM/QR PFC Rev. 1.1 13 March 2015 Product data sheet 1. General description The GreenChip is the latest generation of green Switched Mode Power Supply (SMPS)
Datasheet. 2A 380KHZ 20V PWM Buck DC/DC Converter. Features
General Description Features The is a 380 KHz fixed frequency monolithic step down switch mode regulator with a built in internal Power MOSFET. It achieves 2A continuous output current over a wide input
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS
SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter
NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential
NCP3065, NCV3065. Up to 1.5 A Constant Current Switching Regulator for LEDs
Up to.5 A Constant Current Switching Regulator for LEDs The NCP3065 is a monolithic switching regulator designed to deliver constant current for powering high brightness LEDs. The device has a very low
NCL30051G. PFC and Half-Bridge Resonant Combo Controller for LED Lighting
PFC and Half-Bridge Resonant Combo Controller for LED Lighting The NCL30051 is a combination of PFC and halfbridge resonant controllers optimized for offline LED lighting solutions. This device integrates
unit : mm With heat sink (see Pd Ta characteristics)
Ordering number: EN1321E Monolithic Linear IC LA4261 3.5 W 2-Channel AF Power Amplifier for Home Stereos and Music Centers Features. Minimum number of external parts required (No input capacitor, bootstrap
TM MP2305 2A, 23V SYNCHRONOUS RECTIFIED, STEP-DOWN CONVERTER
The Future of Analog IC Technology TM TM MP305 A, 3 Synchronous Rectified Step-Down Converter DESCRIPTION The MP305 is a monolithic synchronous buck regulator. The device integrates 30mΩ MOSFETS that provide
Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter
FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Max Output Power (W) 1 AC-DC Constant Current or Constant Over temperature protection Voltage LED Driver Over current
47000 SERIES - ELECTRONIC TRANSFORMERS
7000 SERIES - ELECTRONIC TRANSFORMERS MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topology. They constitute an interesting alternative to the traditional
Fairchild On-Line Design Tool: Power Supply WebDesigner Step-by-Step Guide
Fairchild On-Line Design Tool: Power Supply WebDesigner Step-by-Step Guide Start Decide what your power supply requirements will be. Design Example: For this step we will design an AC to DC off-line power
