PLM V6 for System Engineering
|
|
- Reynard Griffin
- 7 years ago
- Views:
Transcription
1 M 6 for System Engineering g Dr Antoine AUZY, System Engineering &D Director Ter@tec orum, Ecole olytechnique, 06/16/2010
2 mpossible d'afficher l'image. otre ordinateur manque peut-être de mémoire pour ouvrir l'image ou l'image est endommagée. edémarrez l'ordinateur, puis ouvrez à nouveau le fichier. Si le x rouge est toujours affiché, vous devrez peut-être supprimer l'image avant de la réinsérer. Dassault Systèmes History at a Glance Collaborative Business rocess roduct ife-cycle Management ealistic Simulation ife-ike Experience Model-Based System Engineering hotos courtesy of The Boeing Compa ny & BMW Digital it Mockup M 2.0 3D 2D 3D M /28/2010
3 System Engineering ains GT suite TESS edyna Code Editors AMESim MathCAD MNT Matlab Simulink Target link Dspace Compilators lasher Geensys olcano Adams Bus Archi. MS Office Matlab Simulink Sodius ector CANAYSE ector CANape ector CANoe Entreprise Architect Simack System Architecture MAB Sub-System & Component Development Heterogeneous Data Bases Embedded Software hapsody Test & erification QA-C Autobox Dspace Matlab Simulink GENTX Starrec H Dspace Microgen Core NSpector ABCA Caliber MS Word equirements Calibration, Diagnostics, Manufacturing ETAS NCA EDABAS edoc TS Doors S
4 (Model-Based) System Engineering Challenges Manage the increasing complexity of systems (hardware/software) Manage (commercial) diversity Ensure end-to-end traceability mprove collaborations between internal divisions and with external suppliers through exchange of models. ntegrate existing models and tools Ensure compliance with regulations and standards Demonstrate a quick eturn On nvestment DASSAUT SYSTEMES - Date age Confidential nformation
5 M 6 for System Engineering Single M open collaborative platform for Model-Based System Engineering Needs System equirements Management M 6 alidation Citizen of ntegrated M unctional Analysis erification ogical Architecture Definition hysical Design ntegration ersistence & navigation on system engineering data Models, virtual experiences Uniform management of diversity ersioning, configurations Collaborative environment Traceability mpacts of changes ntegration of legacy models & tools
6 System Architecture M 6 unctional/ogical Editor Definition of functional and organic architectures Early simulation, verification of business rules Carrier for advanced modeling & simulation ntegration with 3D 6 Confidential nformation
7 6 nterfaces Design & ife Cycle Management M 6 Mandatory for communication between OEM and Suppliers Architecture of Systems Definition of nterfaces (ports) Definition of Connections Catalogs of Data/Signal rojections of connections of functions onto connections of equipments ife Cycle Management of nterfaces DASSAUT SYSTEMES - Date age Confidential nformation
8 System Behavior M 6 / Editor Modelica Continuous Modelica Synchrone Event Modelica Continuous, multi-domain (ODE/DAE) Discrete (data-flow, state-charts) Event-based (safety analyses) Co-simulation platform (M/Modelisar) System Experiment Manager (life-cycle l of virtual experiments) Connection with isight & ipper ENOA M 6 8
9 Openness to non-6 Tools M 6 / Editor Stateflow Statemate Simulink Co-simulation platform (M/Modelisar) System Experiment Manager (life-cycle of virtual experiments) Connection with isight & ipper ENOA M 6 9
10 System Behavior - Modelica M 6 Multi-Engineering Systems Behavior Modeling & Simulation High level formal language Object-Oriented Built from first-principles (mass, energy, momentum balances) Acausal: describe the problem, not the solution! Open Modelica (non for profit) Association Active community designing libraries & tools ehicle dynamics (3-dim. mechanics) Drive trains (1-dim. mechanics) Hydraulics Combustion Air Conditioning (Thermofluid systems) Electrical/electronic l/ l t i systems Electrical machines Hierarchical state machines Control (nput/output blocks,...) Confidential nformation
11 European rojects created & leaded by DS M 6 Building a large eco-system of users and developers EuroSysib: Knowledge Capture and euse Modelisar: rom ogical Architecture to Embedded Software TEA2 roject nitiated by Dassault Systèmes & D 2.5 Years Duration : Oct March artners > 16 Mill. total budget > 100 man years effort > 30 Modelica ibraries to be developed (free + commercial) Mechanics, Electrical, Thermo-luid, Control, Safety, Automotive Already significant new results (e.g. fluid modeling) TEA2 roject "rom System modeling to Software running on the ehicle" Headed by Dassault Systèmes & Daimler 3 Years Duration 28 artners > 150 man years effort Embedded Control Systems in ehicles with Modelica and AUTOSA AUTOSA support in Modelica & code generation from Modelica unctional Mock-up nterface (new standard for Model-in-the- oop, Software-in-the-oop Simulation) ntegration in 6 roduct ife Cycle Management
12 6 M latform for irtual Experiments M 6 irtual Experiments ife Cycle Management (MS paradigm) ntegrated latform for irtual Experiments Definition of Scenarii Scripting Workflow and Optimization Analysis of the esults (plotting) Distribution of calculations DASSAUT SYSTEMES - Date age Confidential nformation
13 ntegration, erification & alidation An integrated environment for M, S & H M 6 Model n the oop Software n the oop Hardware n the oop CAN bus controller model AUTOSA code running on a C Board with ECU plant model model model Autosar builder At Artop Modelica Workbenches Eclipse Adaptation to Test Bench HW Co-simulation platform (M/Modelisar) DASSAUT SYSTEMES - Date age M 6 Confidential nformation
14 egulations & Standards M 6 ncreasing importance of egulations & Standards d EC Generic Standard EC EC DO 178B EN50126 SO EC Oil & Gas Machinery Avionic EN50128,EN50129 MSA Nuclear ndustrial rocesses ail Automotive unctional Safety ife Cycle Management of Safety Standards workflows Automated extraction of relevant data from the M Definition of templates of documents erification of Business ules 2. Management of functional safety 2-4 Overall project independent safety management 2-5 Safety management during development 3. Concept phase 3-4 tem definition 3-5 nitiation of the safety lifecycle 3-6 Hazard analysis and risk assessment 3-7 unctio na l sa fety concept 4-4 nitiation of product development at system level 4-5 S pe cification of tech nica l safety concept hardw are level 5-4 nitiation of product development at hardware level 5-5 Specification of hardware safety requirem ents 5-6 Hardware design 5-7 H W a rchitectu ral constraints 5-8 Assessm ent criteria for probability of violation of safety goals 5-9 Hardware integration and testing 5-10 Q ualification of com po nen ts 5-11 Overall requirements for hardware abstraction layer 1. Glossary 4. roduct development: system level 4-10 roduct release 4-9 un ctiona l sa fe ty a ssessm e nt 4-8 Safety validation 4-6 System design 4-7 System integration and testing 5. roduct development: 5-12 S afety-related special characteristics 6. roduct development: software level 6-4 nitiation of product developm ent at software level 6-5 S pecification of softw a re safe ty requirements 6-6 Software design 6-7 Software unit design and implementation 6-8 Software unit testing 6-9 Software integration and te stin g 6-10 S oftw are safety acceptance te stin g 2-6 S a fe ty m an age m en t a ctivitie s a fte r S O 7. roduction and operation 7-4 roduction 7-5 Operation, service and decommissioning Core processes 8. Supporting processes 8-4 nterfaces within distributed developm ents 8-10 erification 8-5 Overall management of safety requirements 8-11 Documentation 8-6 Configuration management 8-12 Overall quality management 8-7 Change m anagement 8-13 Qualification of software tools 8-8 Safety analyses 8-14 Qualification of software libraries 8-9 Analysis of CC, CM, cascading failures 8-15 roven in use argumentation 9. Annexes DASSAUT SYSTEMES - Date age Confidential nformation
15 M 6 Systems romise olcano Adams Bus Archi. MS Office Geensys Safety and Optmization GT suite AMESim Dynamic Behavior Modelling Matlab Simulink ogic Control Modeler Sodius ector CANAYSE ector CANape / Editor ector CANoe Entreprise Architect 3D for Systems TESS edyna MathCAD Simack System Architecture MNT MAB Sub-System & Component Development M 6 Dynamic Behavior Modelling Matlab Simulink Embedded Software Code Editors Target link Dspace ogic Control Modeler hapsody Test & erification Compilators QA-C Autosar Builder Autobox Dspace Safety and Optmization Matlab Simulink System Experiment GENTX Manager lasher Starrec H Dspace Microgen Core NSpector ABCA Caliber MS Word equirements Calibration, Diagnostics, Manufacturing ETAS NCA EDABAS equirement Central edoc TS S Doors unctional Mockup ife Cycle Management
SWIFT and Payment Factory projects
SWIFT and Payment Factory projects Gary Starling, Accenture London Copyright 2009 Accenture All Rights Reserved. Accenture, its logo, and High Performance Delivered are trademarks of Accenture. Agenda
More informationMay 26th 2009. Pieter van der Linden, Program Manager Thomson. May 26 th, 2009
Presentation at Chorus Final Conference May 26th 2009 Pieter van der Linden, Program Manager Thomson May 26 th, 2009 Brief status Following the European approval, the core developments started in May 2008.
More informationConfiguration management in AUTOSAR
Configuration management in AUTOSAR The need for efficient process tools for Automotive System Engineering V0.01 2008-11-02 Introduction AUTOSAR will influence the ECU SW Architecture and also the way
More informationA Next Generation Avionics Software Architecture The ECOA Programme
This document was developed by BAE SYSTEMS, Dassault Aviation, Bull SAS, Thales Systèmes Aéroportés, AgustaWestland Limited, GE Aviation Systems Limited, General Dynamics United Kingdom Limited and Selex
More informationModel-Driven Software Development for Robotics: an overview
Model-Driven Software Development for Robotics: an overview IEEE-ICRA2011 Workshop on Software Development and Integration in Robotics Jan F. Broenink, Maarten M. Bezemer Control Engineering, University
More informationDevelopment of AUTOSAR Software Components within Model-Based Design
2008-01-0383 Development of AUTOSAR Software Components within Model-Based Design Copyright 2008 The MathWorks, Inc. Guido Sandmann Automotive Marketing Manager, EMEA The MathWorks Richard Thompson Senior
More informationPower inverters: Efficient energy transformation through efficient TargetLink code
Page 6 santerno Power inverters: Efficient energy transformation through efficient TargetLink code Upva page 7 lue Energy Every day, the amount of energy delivered by the sun is 15,000 times the current
More informationTÜ V Rheinland Industrie Service
TÜ V Rheinland Industrie Service Business Area: Automation / Functional Safety Contact Minsung Lee +82-2-860-9969 mailto : minsung.lee@kor.tuv.com Sales Account Manager for Functional Safety Fax +82-2-860-9862
More informationModel-driven development solutions To support your business objectives. IBM Rational Rhapsody edition comparison matrix
Model-driven development solutions To support your business objectives IBM Rhapsody edition comparison matrix IBM Rhapsody 7.5 edition: capabilities and comparisons The enclosed table compares the capabilities
More informationMathWorks Automotive Conference 2015 Simon Fürst, 2015/09/24. MODEL-BASED SOFTWARE DEVELOPMENT: AN OEM S PERSPECTIVE.
MathWorks Automotive Conference 2015 Simon Fürst, 2015/09/24. MODEL-BASED SOFTWARE DEVELOPMENT: AN OEM S PERSPECTIVE. MODEL-BASED SOFTWARE DEVELOPMENT AT BMW. Software development with MATLAB & Simulink
More informationMastering increasing product complexity with Collaborative Systems Engineering and PLM
Mastering increasing product complexity with Collaborative Systems Engineering and PLM Thierry Ambroisine Dassault Systèmes 10 rue Marcel Dassault, 78140 Vélizy Villacoublay, France thierry.ambroisine@3ds.com
More informationConverting Models from Floating Point to Fixed Point for Production Code Generation
MATLAB Digest Converting Models from Floating Point to Fixed Point for Production Code Generation By Bill Chou and Tom Erkkinen An essential step in embedded software development, floating- to fixed-point
More informationEfficient and Faster PLC Software Development Process for Automotive industry. Demetrio Cortese IVECO Embedded Software Design
Efficient and Faster PLC Software Development Process for Automotive industry Demetrio Cortese IVECO Embedded Software Design 13-06-2013 Automotive OEM Mandatory Requirement Delivery the new vehicle in
More informationModel Based System Engineering (MBSE) For Accelerating Software Development Cycle
Model Based System Engineering (MBSE) For Accelerating Software Development Cycle Manish Patil Sujith Annamaneni September 2015 1 Contents 1. Abstract... 3 2. MBSE Overview... 4 3. MBSE Development Cycle...
More informationEchtzeittesten mit MathWorks leicht gemacht Simulink Real-Time Tobias Kuschmider Applikationsingenieur
Echtzeittesten mit MathWorks leicht gemacht Simulink Real-Time Tobias Kuschmider Applikationsingenieur 2015 The MathWorks, Inc. 1 Model-Based Design Continuous Verification and Validation Requirements
More informationCertification of a Scade 6 compiler
Certification of a Scade 6 compiler F-X Fornari Esterel Technologies 1 Introduction Topic : What does mean developping a certified software? In particular, using embedded sofware development rules! What
More informationSoftware Production. Industrialized integration and validation of TargetLink models for series production
PAGE 24 EB AUTOMOTIVE Industrialized integration and validation of TargetLink models for series production Continuous Software Production The complexity of software systems in vehicles is increasing at
More informationImproving Interoperability in Mechatronic Product Developement. Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic
International Conference on Product Lifecycle Management 1 Improving Interoperability in Mechatronic Product Developement Dr. Alain Biahmou, Dr. Arnulf Fröhlich, Dr. Josip Stjepandic PROSTEP AG Dolivostr.
More informationADI Simulation Systems Help Speed Aircraft Development from Preliminary Design through Certification
ADI Simulation Systems Help Speed Aircraft Development from Preliminary Design through Certification Rapid advancements in avionics systems require moving from concept to certification as quickly and efficiently
More informationISO 26262 Introduction
ISO 26262 Introduction Prof. Christian Madritsch 2012 Table of Contents Structure of ISO 26262 Management of Functional Safety Product Development System Level Product Development Hardware Level Product
More informationIntroduction to MATLAB Gergely Somlay Application Engineer gergely.somlay@gamax.hu
Introduction to MATLAB Gergely Somlay Application Engineer gergely.somlay@gamax.hu 2012 The MathWorks, Inc. 1 What is MATLAB? High-level language Interactive development environment Used for: Numerical
More informationSafe Automotive software architecture (SAFE)
Safe Automotive software architecture (SAFE) 01-03-2012, ARTEMIS Technology Conference 2012 Stefan Voget Continental Automotive Content Motivation Project Organization Work Packages Approach for Interoperability
More informationCollaborating in California: Open HIL Test System Architecture uses the ASAM HIL API
Collaborating in California: Open HIL Test System Architecture uses the ASAM HIL API ASAM INTERNATIONAL CONFERENCE, Dec. 03 04, 2013, Dresden, Germany Dr. Jiri Keprt, National Instruments Corporation (Speaker)
More informationPharmacoepidemiology Big data, Big problems, Big solutions
Pharmacoepidemiology Big data, Big problems, Big solutions James Brophy MD FRCP PhD McGill University Health Center, McGill University, Montreal, Quebec Réseau Québécois de Recherche sur les Médicaments
More informationIndustry Software Driving the Digital Enterprise. siemens.com/industry-software
Industry Software Driving the Digital Enterprise siemens.com/industry-software Digitalization is revolutionizing our economy Business is becoming more and more impacted by digitalization. Customers are
More informationPlug. & Play. Various ECUs tested by automated sequences. dspace Magazine 3/2009 dspace GmbH, Paderborn, Germany info@dspace.com www.dspace.
page 34 Delphi Diesel systems Plug & Play Various ECUs tested by automated sequences page 35 Delphi Diesel Systems has successfully developed automated integration and feature tests for various ECUs for
More informationState of the art Software Modeling. Tony Elliston. SIGADA 2004 Atlanta
State of the art Software Modeling Tony Elliston SIGADA 2004 Atlanta TNI Europe Limited Market our own software modelling tools: CP-Hood and Stood. Distributor for TNI Software range of products. TNI Europe
More informationHow to Upgrade SPICE-Compliant Processes for Functional Safety
How to Upgrade SPICE-Compliant Processes for Functional Safety Dr. Erwin Petry KUGLER MAAG CIE GmbH Leibnizstraße 11 70806 Kornwestheim Germany Mobile: +49 173 67 87 337 Tel: +49 7154-1796-222 Fax: +49
More informationTech Day IBM 28 août 2009 RAT06P3 Introduction à Rhapsody Architect pour l Ingénierie des Systèmes et des Logiciels Embarqués
IBM Software Group Tech Day IBM 28 août 2009 RAT06P3 Introduction à Rhapsody Architect pour l Ingénierie des Systèmes et des Logiciels Embarqués Philippe Leblanc, IT Specialist, philippe.leblanc@fr.ibm.com
More informationPerformance Study based on Matlab Modeling for Hybrid Electric Vehicles
International Journal of Computer Applications (975 8887) Volume 99 No.12, August 214 Performance Study based on Matlab Modeling for Hybrid Electric Vehicles Mihai-Ovidiu Nicolaica PhD Student, Faculty
More informationModel-based Testing of Automotive Systems
Model-based Testing of Automotive Systems Eckard Bringmann and Andreas Krämer ICST 08 Presented by Julia Rubin on November 21, 2012 Multidisciplinary Business 2 Supply Chain of Components 3 Innovation
More informationSCADE System 17.0. Technical Data Sheet. System Requirements Analysis. Technical Data Sheet SCADE System 17.0 1
SCADE System 17.0 SCADE System is the product line of the ANSYS Embedded software family of products and solutions that empowers users with a systems design environment for use on systems with high dependability
More informationSafety and security related features in AUTOSAR
Safety and security related features in Dr. Stefan Bunzel Spokesperson (Continental) Co-Authors: S. Fürst, Dr. J. Wagenhuber (BMW), Dr. F. Stappert (Continental) Automotive - Safety & Security 2010 22
More informationA Lightweight Framework for Testing Safety-critical Component-based Systems on Embedded Targets
A Lightweight Framework for Testing Safety-critical Component-based Systems on Embedded Targets Nermin Kajtazovic, Andrea Höller, Tobias Rauter, and Christian Kreiner Institute for Technical Informatics,
More informationELECTROTECHNIQUE IEC INTERNATIONALE 61508-3 INTERNATIONAL ELECTROTECHNICAL
61508-3 ª IEC: 1997 1 Version 12.0 05/12/97 COMMISSION CEI ELECTROTECHNIQUE IEC INTERNATIONALE 61508-3 INTERNATIONAL ELECTROTECHNICAL COMMISSION Functional safety of electrical/electronic/ programmable
More informationA Case Study of Application Development and Production Code Generation for a Telematics ECU with Full Unified Diagnostics Services
A Case Study of Application Development and Production Code Generation for a Telematics ECU with Full Unified Diagnostics Services Plan A little about Embed and our Ethos Description of the telematics
More informationFrom Signal Routing to complete AUTOSAR compliant CAN design with PREEvision (II)
From Signal Routing to complete AUTOSAR compliant CAN design with PREEvision (II) RELEASED V0.01 2014-12-02 Agenda PREEvision AUTOSAR Webinar Part I AUTOSAR System and Software Design with PREEvision The
More informationMulti-domain Model-driven Development Developing Electrical Propulsion System at Volvo Cars
Multi-domain Model-driven Development Developing Electrical Propulsion System at Volvo Cars Jonn Lantz Technical Specialist, Electric Propulsion Systems @ Volvo Car Group Jonn.Lantz@volvocars.com 1 Partners
More informationAutomatic ASAM MCD-3 supported test. PikeTec GmbH Dr. Jens Lüdemann
Automatic ASAM MCD-3 supported test PikeTec GmbH Dr. Jens Lüdemann Test challenges Clear test case description (Modeling) Continuity and consistency at all test platforms Automated Execution, Assessment,
More informationA new approach to automotive electric/electronic engineering life-cycle management
IBM Software Automotive A new approach to automotive electric/electronic engineering life-cycle management Managing engineering data and processes using a single source of truth 2 A new approach to automotive
More informationContinental Automotive Romania - Research & Development Career Perspectives for Students & Fresh Graduates
Continental Automotive Romania - Research & Development Career Perspectives for Students & Fresh Graduates www.romania.careers-continental.com Career Perspectives 2 Career Perspectives 3 Tehnical University
More informationChip simulation of automotive ECUs
Chip simulation of automotive ECUs Jakob Mauss, QTronic GmbH Matthias Simons, Daimler AG 9. Symposium Steuerungssysteme für automobile Antriebe Berlin-Tempelhof, 20.-21.09.2012 Outline of the talk Chip
More informationModel Based Systems Engineering tools and methods for hydraulic systems design. WIEFP ABIMAQ [Setembro de 2014]
Model Based Systems Engineering tools and methods for hydraulic systems design WIEFP ABIMAQ [Setembro de 2014] Smarter decisions, better products. LMS, +30 years of Engineering Innovation Leading partner
More informationVirtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim
Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Joel Tollefson Imagine Inc. Aerospace Business Development Hans Van den Wijngaert LMS Product Manager Motion
More informationRequirement Traceability in Practice
Requirement Traceability in Practice How to turn the challenge into an opportunity Ali Shahrokni, Ph.D. Business analyst & application engineer ali.shahrokni@systemite.se Systemite Founded 2000 in Gothenburg,
More informationSystems Engineering Tools Integration and Interoperability using OSLC in the SPRINT project
Systems Engineering Tools Integration and Interoperability using OSLC in the SPRINT project Andreas Keis, Parham Vasaiely (EADS Innovation Works, Newport) Uri Shani (IBM Israel Science and Technology Ltd.,
More informationDevelopment Process Automation Experiences in Japan
Development Process Automation Experiences in Japan Dr. Olaf Kath ikv ++ technologies ag Germany ikv++ technologies ag 2007 who we are core business optimization and automation of our customer s system
More informationHardware Virtualization for Pre-Silicon Software Development in Automotive Electronics
Hardware Virtualization for Pre-Silicon Software Development in Automotive Electronics Frank Schirrmeister, Filip Thoen fschirr@synopsys.com Synopsys, Inc. Market Trends & Challenges Growing electronics
More informationBest practices for developing DO-178 compliant software using Model-Based Design
Best practices for developing DO-178 compliant software using Model-Based Design Raymond G. Estrada, Jr. 1 The MathWorks, Torrance, CA Eric Dillaber. 2 The MathWorks, Natick, MA Gen Sasaki 3 The MathWorks,
More informationProduct Information CANape Option Simulink XCP Server
Product Information CANape Option Simulink XCP Server Table of Contents 1 Overview... 3 1.1 Introduction... 3 1.2 Overview of Advantages... 3 1.3 Application Areas... 3 1.4 Further Information... 4 2 Functions...
More informationAutomotive CAE Integration.
WHITEPAPER Automotive CAE Integration.. 2010 AUDI AG BMW AG Daimler AG Dr. Ing. h. c. F. Porsche AG Volkswagen AG PROSTEP AG Automotive CAE Integration Addendum to Automotive CAE Integration: Requirements
More informationRotorcraft Health Management System (RHMS)
AIAC-11 Eleventh Australian International Aerospace Congress Rotorcraft Health Management System (RHMS) Robab Safa-Bakhsh 1, Dmitry Cherkassky 2 1 The Boeing Company, Phantom Works Philadelphia Center
More informationELECTRICAL & POWER DISTRIBUTION
ELECTRICAL & POWER DISTRIBUTION END-TO-END ELECTRICAL WIRING INTERCONNECTION SYSTEMS (EWIS) Complete EWIS System Design Harness Installation Design Reconciliation of Wiring Diagrams (2D) & Harness Design
More informationIn networking ECUs in heavy-duty vehicles, it is the J1939 protocol that. plays a key role. J1939 networks are based on the CAN bus (high-speed
Networking Heavy-Duty Vehicles Based on SAE J1939 From Parameter Group to plug-and-play Application In networking ECUs in heavy-duty vehicles, it is the J1939 protocol that plays a key role. J1939 networks
More informationHerstellerinitiative Software (OEM Initiative Software)
Herstellerinitiative Software (OEM Initiative Software) Dr. Michael Daginnus Volkswagen AG Wolfsburg Dr. Dieter Marx Porsche AG Weissach Dr. Ralf Belschner Daimler AG Sindelfingen Kai Barbehön BMW AG München
More informationInternet of things, Machine-to-Machine, Big Data. Architectural discussion. February 2012 Dennis Lauwers. 2012 IBM Corporation
February 2012 Dennis Lauwers Internet of things, Machine-to-Machine, Big Data Architectural discussion Impossible d'afficher l'image. Votre ordinateur manque peut-être de mémoire pour ouvrir l'image ou
More informationModel Based Software Development for DDG 1000 Advanced Gun System
BAE Systems Land & Armaments Model Based Software Development for DDG 1000 Advanced Gun System Dirk Jungquist BAE Systems Land & Armaments 2012 Distribution Statement A: Approved for public release; distribution
More informationCOMOS. The software solution for integrated plant management. www.siemens.com/comos
COMOS The software solution for integrated plant management www.siemens.com/comos COMOS From Integrated Engineering to Integrated Operations Increasing global competition requires productivity and quality
More informationCPO Statement of Dassault Syste mes
CPO Statement of Dassault Syste mes Following the prerequisites of ProSTEP ivip s Code of PLM Openness (CPO) IT vendors shall determine and provide a list of their relevant products and the degree of fulfillment
More informationAutomationDesk. Remote control of calibration, measurement, and diagnostic tools such as CalDesk. Open COM API to remote-control test execution
AutomationDesk 2.0 Automated Hardware-in-the-Loop (HIL) Testing New-Look of User Interface NEW: Advanced Sequence Builder NEW: Offline Test Execution & Development NEW: Enhanced Multi-User Support dspace
More informationElectrics & Electronics
Area of competence Electrics & Electronics Maximum Focus ARRK P+Z Engineering For nearly 50 years, we have providing active product development support to customers from the automotive, aerospace and special
More informationSmart Manufacturing as a Real-Time Networked Enterprise and a Market-Driven Innovation Platform
Smart Manufacturing as a Real-Time Networked Enterprise and a Market-Driven Innovation Platform Jim Davis Vice Provost IT & CTO at UCLA and SMLC Board Director Technology Denise Swink CEO SMLC Role/Viewpoint
More informationSafety Integrated. SIMATIC Safety Matrix. The Management Tool for all Phases of the Safety Lifecycle. Brochure September 2010. Answers for industry.
SIMATIC Safety Matrix The Management Tool for all Phases of the Safety Lifecycle Brochure September 2010 Safety Integrated Answers for industry. Functional safety and Safety Lifecycle Management Hazard
More informationBMC ITSM Suite - nabité skúsenosťami. Juraj Izák, 13.10.2011
BMC ITSM Suite - nabité skúsenosťami Juraj Izák, 13.10.2011 MATERNA GmbH 2011 www.materna.com 1 Presenter Name Function E-mail Telephone Fax Mobile Ing. Juraj Izák Senior Consultant juraj.izak@materna.com
More informationVerification and Validation According to ISO 26262: A Workflow to Facilitate the Development of High-Integrity Software
ABSTRACT Verification and Validation According to ISO 26262: A Workflow to Facilitate the Development of High-Integrity Software Mirko Conrad The MathWorks, Inc. Natick, MA, USA mirko.conrad@mathworks.com
More informationQuality Assurance of Models for Autocoding
Quality Assurance of Models for Autocoding Ann Cass, Pierre Castori S YNS PACE AG Hardstrasse 11 CH - 4052 Basel ac@synspace.com, pc@synspace.com Abstract: Automatic Code Generation is an emerging technology
More informationVehicle Electronics. Services and Solutions to Manage the Complexity
Vehicle Electronics Services and Solutions to Manage the Complexity INNOVATIONS & DEVELOPMENT CYCLES Commercial vehicle manufacturers are experiencing a technological change. In addition to the rising
More informationModel Sharing to leverage customer cooperation in the ECU software development
Model Sharing to leverage customer cooperation in the ECU software development Stéphane Louvet, Ulf Niebling, Mouham Tanimou To cite this version: Stéphane Louvet, Ulf Niebling, Mouham Tanimou. Model Sharing
More informationModel-based online applications in the ABB Dynamic Optimization framework
Model-based online applications in the ABB Dynamic Optimization framework Rüdiger Franke ABB Power Technology Systems Mannheim, Germany Marc Antoine ABB Power Technology Systems Baden, Switzerland B.S.
More informationTechnical Data Sheet SCADE Suite R16. Software Prototyping and Design. Technical Data Sheet SCADE Suite R16 1
SCADE Suite R6 SCADE Suite is a product line of the ANSYS Embedded software family of products and solutions that empowers users with a Model-Based Development Environment for critical embedded software.
More informationBeschleunigen Sie die Entwicklung Ihrer Embedded Software mit Dienstleistungen von Vector
Beschleunigen Sie die Entwicklung Ihrer Embedded Software mit Dienstleistungen von Vector Vector Embedded Software 2013 V1.3.0 2013-04-04 Your Presenters Today Michael Buck Manager Product Services / Technical
More informationAADL et la conception des logiciels
AADL et la conception des logiciels Pierre Dissaux, journée Féria/SVF, 2 décembre 2003 System Lifecycle System Engineering System Integration Hardware Engineering Software Engineering from System Engineering
More informationEfficient Verification for Avionic Product Development
YAVE Test Systems Efficient Verification for Avionic Product Development With YAVE FTI offers the full range of test systems from compact budget units up to complex systems configured to customers individual
More informationSoftware House Embedded Systems
Software House Embedded Systems Contacts: E-mobility, chassis, driver assistance and body electronics: Martin Richter +49 5371 805-1041 Infotainment, radio and instrument cluster: Sven Lochau +49 30 39978-7631
More informationYour advantages at a glance
Your advantages at a glance SIMATIC Inventory Baseline Services as the basis for additional services Plant Inventory Available inventory data Project data & inventory data SIMATIC System Assessment/ Audit
More informationAutomotive Software Development Challenges Virtualisation and Embedded Security
Automotive Software Development Challenges Virtualisation and Embedded Security 1 Public ETAS-PGA/PRM-E October 2014 ETAS GmbH 2014. All rights reserved, also regarding any disposal, exploitation, Automotive
More informationModel Based Systems Engineering for Aircraft Systems How does Modelica Based Tools Fit?
Model Based Systems Engineering for Aircraft Systems How does Modelica Based Tools Fit? Ingela Lind Henric Andersson SAAB Aeronautics SE-581 88 Linköping, Sweden ingela.lind@saabgroup.com henric.andersson@saabgroup.com
More informationW Regional Cooperation in the Field of A u tom otiv e E ngineering in S ty ria Dr. Peter Riedler 2 9.1 1.2 0 1 1 i e n GmbH Graz B u s ines s S trategy S ty ria 2 0 2 0 H is tory 1 9 9 4 1 9 9 5 1 9 9
More informationTrends in Embedded Software Engineering
Trends in Embedded Software Engineering Prof. Dr. Wolfgang Pree Department of Computer Science Universität Salzburg cs.uni-salzburg.at MoDECS.cc PREEtec.com Contents Why focus on embedded software? Better
More informationSAVI Behavior Model Integration Virtual Integration Process
SAVI Behavior Model Integration Virtual Integration Process David Redman, AVSI Texas A&M University Copyright 2014 Boeing. All rights reserved. GPDIS_2015.ppt 1 Outline AVSI SAVI Motivation SAVI Program
More informationDesign and Development of Transport Aircraft Systems
Richard Smyth Design and Development of Transport Aircraft Systems RAeS, DGLR, VDI, HAW Hamburg Collaborative Engineering in Systems Development Contents Objectives and Drivers The Systems Development
More informationEHOOKS Prototyping is Rapid Again
09CV-0113 EHOOKS Prototyping is Rapid Again Vivek Jaikamal ETAS Inc. Nigel Tracey ETAS Ltd. Copyright 2009 SAE International ABSTRACT Automotive controls engineers have traditionally used bypass rapid
More informationMOSILAB: Development of a Modelica based generic simulation tool supporting model structural dynamics
MOSILAB: Development of a Modelica based generic simulation tool supporting model structural dynamics Christoph Nytsch-Geusen (Contact: christoph.nytsch@first.fhg.de) Thilo Ernst, André Nordwig Peter Schneider,
More informationOn the Way to Industrie 4.0 The Digital Enterprise Siemens AG 2015 siemens.com
Klaus Helmrich Member of the Managing Board of Siemens AG On the Way to Industrie 4.0 The Digital Enterprise siemens.com Siemens focuses on electrification, automation and digitalization and is actively
More informationI can make just such ones if I had tools, and I could make tools if I had tools. -Eli Whitney
I can make just such ones if I had tools, and I could make tools if I had tools to make them with. -Eli Whitney Automotive Software Development and Model Based Design (Matlab & Simulink) Ian M. Alferez,
More informationSCADE Suite in Space Applications
SCADE Suite in Space Applications at EADS David Lesens 09/10/2008 Overview Introduction Historical use of SCADE at EADS Astrium ST Why using SCADE? The Automatic Transfer Vehicle (ATV) M51 and Vega R&T
More informationOffice Of Nuclear Energy. Annual Review Meeting
Office Of Nuclear Energy Annual Review Meeting Dynamic Simulation Modeling Tool Lou Qualls ORNL September 16-18, 2014 Task Relevancy Work Package SR-14OR130108 Modeling Tools for Dynamic Behavior Simulations
More informationBest Practices for Verification, Validation, and Test in Model- Based Design
2008-01-1469 Best Practices for Verification, Validation, and in Model- Based Design Copyright 2008 The MathWorks, Inc. Brett Murphy, Amory Wakefield, and Jon Friedman The MathWorks, Inc. ABSTRACT Model-Based
More informationModel-Based Development of Safety-Critical Systems
Model-Based Development of Safety-Critical Systems Matthias Regensburger (regensbu@in.tum.de) Christian Buckl (buckl@in.tum.de) 08.05.2007 1 Overview Motivation Approach: Template Based Development Models
More informationThe SPES Methodology Modeling- and Analysis Techniques
The SPES Methodology Modeling- and Analysis Techniques Dr. Wolfgang Böhm Technische Universität München boehmw@in.tum.de Agenda SPES_XT Project Overview Some Basic Notions The SPES Methodology SPES_XT
More informationService Oriented Architecture for Agricultural Vehicles
Service Oriented Architecture for Agricultural Vehicles Leipzig, 30.9.2010 8. Workshop Automotive Software Engineering Dr. G. Kormann, M. Hoeh, H.J. Nissen THE END of Embedded Software? www.electronics-ktn.com/
More informationStandardized software components will help in mastering the. software should be developed for FlexRay were presented at
Embedded Software for FlexRay Systems Special aspects and benefits of implementing modularized software Standardized software components will help in mastering the growing complexity of the interplay of
More informationSoftware solutions for manufacturing operations management. Helping manufacturers optimize the Digital Enterprise and realize innovation
Siemens PLM Software Software solutions for manufacturing operations management Helping manufacturers optimize the Digital Enterprise and realize innovation www.siemens.com/mom A holistic approach to optimize
More informationValidation, Transformation & Loading Solution (VTL)
VTL High-quality Plant Asset Data Handover Validation, Transformation & Loading Solution (VTL) Tom Arsenovic Vice President, PP&M EMIA Services & Business Development Adrian Park, Global Executive Director,
More informationCustomer Experience. Silicon. Support & Professional Eng. Services. Freescale Provided SW & Solutions
September 2013 Silicon Support & Professional Eng. Services Customer Experience Freescale Provided SW & Solutions Provide Valued Software, Support & Professional Engineering Services, Competitively 2 Customer
More informationIntegrated Custom Systems
Integrated Custom Systems Compact panels Standard Manifolds & Assemblies Electronic pressure control Custom manifolds & Assemblies Automated test benches S t r e a m l i n e y o u r p r o c e s s Complete
More informationSoftware Engineering. Software Processes. Based on Software Engineering, 7 th Edition by Ian Sommerville
Software Engineering Software Processes Based on Software Engineering, 7 th Edition by Ian Sommerville Objectives To introduce software process models To describe three generic process models and when
More informationFinal Year Projects at itm. Topics 2010/2011
Final Year Projects at itm Topics 2010/2011 Chair of Information Technology in Mechanical Engineering Prof. Dr.-Ing. B. Vogel-Heuser Prof. Dr.-Ing. Frank Schiller Prof. Dr.-Ing. Klaus Bender Technische
More information