New Crankshafts. Crankshafts - Heavy Duty
|
|
|
- Candice Prudence Wood
- 7 years ago
- Views:
Transcription
1 Crankshafts - Heavy Duty New Crankshafts Allis Chalmers Case / IH Caterpillar Cummins David Brown Detroit Diesel Deutz Ford Isuzu John Deere Komatsu Mack Mitsubishi Navistar Perkins Local: (402) Fax: (402) sales@endurancepower.com 6200 Arbor Road Lincoln, NE All manufacturers names, numbers, symbols, and descriptions are used for reference purposes only and it is not implied that any part listed is the product of the manufacturer. Prices subject to change without notice. Prices subject to availability. June 2008
2 - Heavy Duty Crankshaft Catalog Listing of crankshaft for heavy duty diesel and gas engines Applications for Agricultural, Industrial, Construction, Truck Prices are subject to availability and change without notice Allis Chalmers Crankshafts 2 Case / IH Crankshafts 2 Caterpillar Crankshafts Continental Crankshafts Cummins Crankshafts David Brown Crankshafts Detroit Diesel Crankshafts Deutz Crankshafts Ford Crankshafts Isuzu Crankshafts John Deere Crankshafts Komatsu Crankshafts Mack Crankshafts Mitsubishi Crankshafts Navistar Crankshafts Perkins Crankshafts Scania Crankshafts This is a listing of our most popular crankshafts. If you don't see your application listed, please call. We also have a selection of reground crankshafts. The use of the original manufactureres' part numbers are for reference purposes only - the parts offered are not original manufacturere's parts., Inc., sells replacement parts for use in the equipment of various manufacturers., Inc., and the listed parts contained herein are not sponsored, affiliated, or otherwise connected in any way with the equipment manufacturers named in this catalog (800) ( 1 )
3 - Heavy Duty Crankshaft Catalog Allis Chalmers G226, W226 Gas Engine Super 100, 170, 175; W25, WD45 U-3986, , , TL10 # ; TL11 thru # , , TL12 thru #1281 G CID cyl, 3.3L 200 CID , 433I, 433T Diesel Engine 2200, 6060, 6070, 6080 Tractor F2, F3 Combine; HD , , , , Flange: flat, no center ring, 6 bolt Snout: 1 Lg bolt hole, 2 key ways W/ balance gear in center With balance gear in center Case / IH 430,440,470,480,530,570,580 Flange: No centering ring, 4 bolt , A Splined A B,630,640 Wheel Tractors holes, splined 13 groove G11740, G E,310F,310G,350,450 Crawler Snout: Threaded, 2 keyways 188 Bushing A Non Turbo D L D L D L D358 A R R R R1 D414, DT C1 D436, DT C1 DT L C93 430,440,470,480,530,570, B,630,640 Wheel Tractors 310E,310F,310G,350,450 Crawler 350, 450 Crawler Tractor 580C, 580D Wheel Tractor 364, 384, 444 Tractor BD154 Engine 544, 574, 674, 684 Diesel Tractor TD7E, TD8C Crawler Tractor 510B Loader Neuss Diesel (German Built) 826, 886, 955XC, 1420, , 3288 (bolt on counterweights) 966, 1066, 1086 Tractor 815 Combine H65C Loader, E200 Scraper 1466, 1566, 1586, 4166, 4186, 100 Hydro Tractors 1460, 1480 Combines DT466B, DT466C 3588,3788,4366,4386,5288,5488 TD12, TD15C, TD15E Crawlers , A39151 G11740, G R1, R C, C C, C C1, C C1, C C4 Flange: No centering ring, 4 bolt holes, bushing installed Snout: Threaded, 2 keyways Flange: No centering ring, 4 bolt holes Snout: Threaded, no spline, 2 key Flange: 4 bolt holes, 2 dowel hole Snout: Threaded on end, 2 key 4 cylinder Flange: Flat, 7 bolt holes, Helical balance gear in center Snout: Straight, 3 bolt holes Flange: Flat, 7 bolt holes, Helical balance gear in center Snout: Straight, 3 bolt holes Snout: with gear, 3 bolt holes Flange: Flat, 8 bolt holes Snout: Straight, 3 bolt holes, Flange: Flat, 8 bolt holes Snout: Straight, 3 bolt holes, Flange: Flat, 8 bolt holes Snout: Straight, 3 bolt holes, (800) ( 2 )
4 - Heavy Duty Crankshaft Catalog Caterpillar Perkins CID CID D CID CID B 3306C 3406A 3406B (early) 3406B 3406C (late) 3408 (early) 3408 (late) 3412 (helical gear) (7C8214) W9771 2W0085 8M4505 4N7692 4N7693 7C4859 6I1453 1W6209 1W5009 1W (straight gear) 2W4088 Continental 416, 416C Backhoe TH62/63,TH82/83,TH103 Forklifts CB534/B/C, CB545 Compactors Challenger 35, 45; Lexion Combine 450, 460, 465, 460K Industrial, Truck, Marine D3,910,916,926,926E,931 Loader IT12,IT14,IT18,IT28 Wheel loader 225 Excavator, 227 Logger 613, 613B Wheel Tractor Truck & Industrial Vehicular 920,922,922B,930,941,944,944A 950,951,955,951B,955H,955K D4,D4C,D4D 920,930,955L,963,922B,944, ,941B,951,951B,951C,955K 955L, D4,D4D,D4E Truck & Ind D5,D5B,D6,D6C,D6D,D7,D7F/G 627,627B,637,637B,637D,639/D 966,966C,977,977L,980,980B 977K,977L;12,12E,12F,120,120B, 14,14E,14G,140, 140B, 140G Industrial, Truck, Marine 621B,623B; 980, ,825C,826C,980C,983C 3406 diesel truck, OHC, 24 valve 980F wheel loader 631,633,637,639,631D,633D 637D,639D,768C,834B 988, 988B; D8I, D8L D9R Crawler 988F Loader AD40, AE40, 69D, 769D, 771D haulers D10N, D10R Crawler 24H Grader; 772B Wheel tractor 990, 992C Wheel loader D10N, D10R Crawler 24H Grader; 772B Wheel tractor 990, 992C Wheel loader 071Z ZZ , , 4P5121, 7W5206 1W400, 4N0012, 4N1111 6N8290, 7N5137, OR5024 2W0085,4N8453,4N8454,4N9054 4N9055,9N0300,9N0303,9N0304 9N0305,9N6202,9N6220,9N6221 2M5170, 2S5570, 4M9950 5M9960, 5S5251, 8M4504 8M4505, 8M4506, 9H2725 2P1491,2P1686,2P6213,2P6214 2P6217,3Y1613,4N769,4N7692 4N7694,4N7695,5C3834,5C3835 5S5251,5S5252,9S0771 1P1390,1P1391,2P2824,2P2842 2P6219,2P6221,2W7458,4N7693 4N7696,5C3836,5C3837,5S5870 5S5871,8M4502,9S2270,9S3057 1W6206, 1W6207, 2W2300 2W2585, 4N0006, 6N3906 6N3907,7C3536,7C4859,9Y9112 1W6206, 2W2300, 4N0006 4P9121, 6N3906, 7C3536 9Y9112 1W6208, 1W6209, 4N0008 4N9442, 7N3407, 7N3408 1W5009 Flange: 6 bolt holes, rope seal, light weight Snout: Splined and keyed Flange: Centering ring, 8 bolt hole Snout: Straight w/gear, 4 bolt hole Flange: Centering ring, 10 bolt holes - not symmetric, Snout: Straight, 1 threaded bolt Flange: Flat, 9 bolt holes Snout: Taper w/ gear, 1 bolt hole Flange: Flat, 9 bolt holes Snout: Tapered, 1 bolt hole Flange: Flat, 9 bolt holes Snout: Tapered, 1 bolt hole Flange: 12 bolt holes Snout: 12 bolt holes, Rod journal: Flange: 12 bolt holes Snout: 6 bolt holes Rod journal: Flange: 12 bolt holes gear on back Snout: Front, 12 bolt holes Flange: Centering ring, 12 bolt holes, Snout: Centering ring, 12 bolt holes, 1 gear (helical cut) Flange: Centering ring, 12 bolt holes, Snout: Centering ring, 12 bolt hole Flange: Centering ring, 12 bolt holes, Snout: Centering ring, 12 bolt hole Z134 Gas 134 CID M91 Gas Z134, MF35, MF M91, Z129C205, Z129C500, Z134C500 4 bolt holes, hole Snout: 2 Key ways; With gear (800) ( 3 )
5 - Heavy Duty Crankshaft Catalog Cummins 580K backhoe , Champion: C50, C56, C60, C66, J908031, J C70, C76, C80, C86 Snout: 4 bolt holes 4B 3.9L ISB 4 cyl Vehicular 6B 5.9L ISB 6 cyl Vehicular 6C 8.3L L10 (Early 85-90) 5 bolt holes L10A 5 bolt holes L10 6 bolt holes M CID N CID 885 Bull nose 855 Taper nose Vehicular Vehicular N BT, 6BTA 1896,2096,621,621C,702,721B 721C,821B,821C Loaders Case: 1660,1666,1670,1680, ,2188 Champion: 716, 720, 720VHP Vehicular Champion: 740, 750, 760, 780 Case/IH: 921 Wheel loader Turbo Diesel, Electronic Fuel System; Vehicular N14-310E, N14-330E, N14-370E, N14-410, N14-460E, Vehicular 250, 335, NTC 350, NTC400 Wide fillet, Bull Nose, Big Cam NT855, Small Cam NH200,NH220,NHE180,NHE195 NHHT,NHHTO,NT6,NT743 NTE235,NTO , Rear gear: 36 Teeth (width 1.25") Front gear: 36 Teeth (width.40") , , Rear gear: 36 Teeth (width 1.25") Front gear: 36 Teeth (width.40") , , SE , , , (Interally Balanced) , , , (External Damper) , , , ,110760,111789, ,130186,135030, ,142960,162186, , , , ,110760,111789, ,130186,135030, ,142960,162186, ,196410,208460, , , ,101109,10846, ,123410,123410, ,144016,56711,56712 AR1937,H56711,NH bolt holes, 2 dowels Flange: Seal, No Centering Ring, 8 Bolt Holes. Snout: Bolt Holes, 1 Dowel hole, Speed Indicator Ring 8 bolt holes Snout: 4 bolt holes, no key Flange: Seal, No Centering Ring, 8 Bolt Holes Snout: 6 Bolt Holes, 1 Dowel Hole, Speed Indicator Ring Flange: 8 bolt holes, Snout: Straight, 4 bolt holes Flange:8 bolt holes, 2 dowel holes Snout: 5 bolt holes, 3.72" to shoulder of first main jrnl 3.385" gear boss diameter 8 bolt holes, 2 dowel holes Snout: 5 bolt holes, has pilot, no gear on snout, long Flange: 8 bolt holes, 2 dowel hole Snout: 6 bolt holes 2.75" to shoulder of first main jrnl Gear 1.4" wide Flange: 8 bolt holes, 2 dowel hole Snout: 5 bolt holes Flange: 6 bolt holes Snout: 6 bolt, 1 key way, no gear Snout: Straight 6 bolt holes Snout: Tapered, 1 bolt hole Snout: Straight, 1 bolt hole, 1 large keyway 1 small keyway (800) ( 4 )
6 - Heavy Duty Crankshaft Catalog Cummins (continued) V V V V Flange: 8 bolt holes, Snout: No splines, 5 bolt holes no keyways Flange: 8 bolt holes, Snout: No splines, 5 bolt holes no keyways David Brown cyl D917985I 990 Late, AD4/49 D Small mains 219 Large mains Detroit Diesel K , , 1200, 1210, , , 996, AD4/ , D179935, D Rod journal: Main journal: D298, D928415, D928416, Rod journal: Main journal: unthreaded bolt holes, hole, rope seal Snout: splined, keyed, threaded Flange: Flat, no bolt holes,, rope seal Snout: Splined, keyed, threaded Flange: Flat, no bolt holes,, rope seal Snout: Splined, keyed, threaded 6V CID 6V CID 8V CID 8V CID 60 Series 11.1L 60 Series 12.7L Deutz Industrial, Vehicular, Truck, Marine , , Flange: 6 bolt holes Snout: Straight, 1 large bolt hole 3 keyways Right hand Industrial, Vehicular, Truck, Marine , , Snout: Straight, 1 large bolt hole 3 keyways Industrial, Vehicular, Truck, Marine Industrial, Vehicular, Truck, Marine Vehicular Vehicular , , , , Flange: Flat, 8 bolt holes Snout: Straight, 1 bolt hole 3 keyways Flange: Flat, 12 bolt holes Snout: Straight, 1 large bolt hole 3 keyways Flange: Flat, 12 bolt holes Snout: Straight, 1 large bolt hole 3 keyways Flange: Flat, 12 bolt holes Snout: Centering ring, 12 bolt hole Keyway for gear mounting F3L I 6240, 6250 F4L I 6240, 6250 (800) ( 5 ) (Bolt on Counterweights) Balance Gear Installed - 78 Teeth Flange: Centering Ring, 10 Bolt Holes, 1 Dowel Hole; Snout: 1 Bolt Hole Flange: Centering Ring, 10 Bolt Holes, 1 Dowel Hole; Snout: w/gear, 1 Bolt Hole, 1 Dowel Pin
7 - Heavy Duty Crankshaft Catalog Ford 220 EIADDN6303FI Fordson Major Diesel & Super Fordson Series D 4000 Series tractors E1ADDNN-D, E1ADDNN-E Flange: Thin, 6 bolt hole, Snout: 1 big bolt hole 1 long keyway 172 D EZJL6300BAI 401 BSD ,183,192 BSD Stroke 201 BSD Sroke 713F6303AAA E0NN6303AAI FONN6303MAI Industrial Engines (55-78) Tractors: 801, 901 Series, 1801 Series, 4000 Series, Wheel loader: 540 Allis Chalmers 3000, 3500, 3600, 3910, 4000 Ford Series D 4100 Tractor BSD 329, 3000 Series 3000 Super Dexta, 3230,3300, Tractor, Gas 4000 Series BSD333, 4000, 4000 Major, SU 535, 540, 545, 555 Backhoe B9NN6302B EZJL6300BAI E3HN6303AA, E3HN6303AB E6HN6303CB, E6HN6303CC C7NN6303 C5NNE6303L, C5NE6303R C5NE6305, EN43B C5NE6303N, C5TE6303 Flange: 6 bolt hole, hole Snout: Splined, 1 key way with Balance Gear Installed 256 BSD Stroke 76 or 78 tooth C5NE6303KI (78 tooth gear) C5NE6303KI-76 (76 tooth gear) 5000 Super Major, 5000 Gas 5500, 5550, 5610, 650, , 6700, 7000 Tractor 6110A, C5NE6303K (w/ gear, helical 78 teeth = 5/8" 76 teeth = 1/2") 268 BSD Stroke 76 or 78 tooth E5NN6303DAI (78 tooth gear) E5NN6303DAI76 (76 tooth gear) Dorset Diesel 6000, 6600, , 7710 Turbo diesel D9NN6110AA, D9NN6303A D9NN6303AA, E5NN6303CA E5NN6303FA (w/ gear, helical 78 teeth = 5/8" 76 teeth = 1/2") Snout:, 1 bolt hole Isuzu 4BD BD1 Diesel, 4BD1T Turbo Diesel Flange: Flat, No Centering Ring, 6 Bolt Holes, 1 Dowel Hole; Snout: Threaded, 2 Key Ways John Deere ,1030,1040,1120,1130,1140 AT ,1530,1630,2020,2040, ,2240,2255,2355,5000,5200 T23516, T23517, T ,5400,820,830, PT RE (Short snout) (Long snout) AT18030 RE , 5205, 5200, 5300, 5400, 5410, 5510, 5510N, 5220, 5320, 5320N, 5400N, 5500N, 5420, 5420N, 5520, 5520N 1640,1830,1840,2020,2030, ,2130,2250,2360,2450, ,2850,6200, B,310C,310D,315C,401C 2755, 6040, 190E 300D, 310C, 315C (800) ( 6 ) RE50979, R23517, R81959, R94644 T23480, T23517, T28743 (4-239 Engine s/n -> ) 23909, 97926, R121018, R81959, R (4-239 Engine s/n >) Flange: 4 bolt holes, Snout: 1 bolt hole,, gear 4 bolt holes, ; Snout: w/gear,1 bolt hole, 2-3/8" from end of snout to gear Flange: 4 bolt holes, no centering ring Snout: 1 bolt hole,, gear Snout: keyway 5/16 x 1-1/8 Long snout: 60 mm longer
8 - Heavy Duty Crankshaft Catalog John Deere (continued) 4-276D 4-276T 4045D 4045T RE56792 RE D,440C/D,448D,540B/D,548D 344E,410C,444E,510B/C,610B/C, 450E/G,455E/G,550A/B,550G 410G,440G,510D Loader 490E Excavator; 540E Skidder 548E Grapple/Skidder R5450, R54501 R PT RE50618 Power tech R D 6-414T 6068D 6068T 6-414D 6-414T 6068D 6068T AT22562 RE45517 RE ,2940,2950,2955,3150, ,444C,444CH,444D,540,540A 540E,540G,544,544A,544C,544D 544E,570,570A,570B,710B,710C 544B,544C,544D,624E,624G 640,640D,640E,643,643D,648D 648E,648G,653,655B,670,670A 670B,672A,672B,690D 544B,544C,544D,624E,624G 640,640D,640E,643,643D,648D 648E,648G,653,655B,670,670A 670B,672A,672B,690D 6.8 PT RE Power tech R early s/n -> AR , , 500A, 500B, 500C, late s/n > AR , , 500A, 500B, 500C, 510 (Long nose: 3.087" (60mm) A102,AT22562,F1910R, F2729R F2792R,F3315R,F3560R R26550,R40730,RE45541 T23264,T23299,T23480,T23517 R54619, RE33687 Flange: 4 bolt holes, pin hole Snout: 1 bolt hole w/ helical gear Flange: 4 bolt hole, hole Snout: Gear.871" wide, 1 bolt hole on end Flange: flat, 4 bolt holes, hole; Snout: w/gear, helical 30 teeth, 4 bolt holes 4 bolt holes, Snout: 1 bolt hole, Flange: Flat, 4 bolt holes, Snout: Straight,, 1 bolt hole, 1 front helical gear R81113, R Flange: 6 bolt holes R26540R, R46498 R D early AR , 4010, 4020 early R late early s/n -> mid s/n to late (short nose) RE53422 RE53201 RG ,4230,4240,4430,4440, ,4640,4650,4830,4840, ,8430,8440, ,644A,644C,644D,646C, A,690C,693C,740,740A, A,762A,762B,770A,770B,772A 772B,790,790D,792,793D 4455,4555,4755,4760,4955, ,7800,8560,8570, E,644EH,644ER,644G,740E 748E,748G,892E 4055, 4255, 4455, 8560, , 8200, 8300 Cotton: 9960, 9970 (800) ( 7 ) R53203, R56979 Short nose: 3" Helical timing gear R104855, RE42671 RE63293 Long nose: 3.4" R104855, R26560, RE42675, RE53203, RE53477, R56506, R56919, R56934, R56979, R63451, R87544A Short nose: 3" Straight timing gear 27 teeth Flange: 6 bolt holes, hole; Snout: w/gear, helical 30 teeth, 4 bolt holes, rolled fillets Flange: No centering ring, flat 2 dowels; Snout: With gear, 1 bolt hole, Flange: Centering ring, 4 bolt hole 2 dowels; Snout: With gear, 1 bolt hole, Flange: Flat, 4 bolt holes, 2 dowel Snout: 1 bolt hole, with gear installed ; Snout: Straight, 1 bolt hole,, w/oil pump drv gr (3.00" long to the shoulder of first main journal to end of snout) ; Snout: 1 bolt hole, 2 keyway (3.4" long to the shoulder of first main journal to end of snout), w/oil Pump Drive Gear Snout: 1 bolt hole,, 3" Long from Shoulder of the 1st main jrnl to the end of the snout
9 - Heavy Duty Crankshaft Catalog John Deere (continued) 8630, 8640, 8650 R36350, R57730, R B,646B,700,700A,760,760A AR92533 R63478, AR47403, AR ,770,770A,772A,850,855,860 AR B,862,862B,890,892A,992D early s/n -> Snout: Straight, 1 bolt hole, 1 large keyway, 1 small keyway Komatsu 743 Cummins AR1937 S6D S6D Dozer: D37E-2 Cralwer: D31, D37 Excavator: PC1200 Crawler: D41 Grader: GD505, GD525 Excavator: PC , , , Snout: Straight, 1 bolt hole, 1 large keyway, 1 small keyway 6 bolt holes, hole Snout: 1 bolt hole, 6 bolt holes, hole Snout: 1 bolt hole, Mack E6 45GC5113 E7 57GC2145 E7 Diesel 456-CFG-5128, 456-CFG bolt holes, 1 shallow dowel hole Snout: Straight, 1 bolt hole Mitsubishi 4D31 ME FE Turbo Diesel Truck ME Flange: Centering Ring, 6 Bolt Holes, 1 Dowel Hole Snout: Splined, 2 Key Ways Navistar 6.9L 421CID C C1, L 444CID DT360 DT L C C93 DT360, DTA360 Diesel Truck Trucks: International DT466B, DT466C 3588,3788,4366,4386,5288,5488 TD12, TD15C, TD15E Crawlers C91, C C1, C C1, C C4 Flange: Flat, No Centering Ring, 8 Bolt Holes Snout: w/2 Gears, 1 Key Way, 3 Bolt Holes Flange: Flat, 8 bolt holes Snout: Straight, 3 bolt holes, (800) ( 8 )
10 - Heavy Duty Crankshaft Catalog Perkins MF Ag: 135,148,230,240,250, M1, , ,350,353,355,360,363, , M91, MF Ind: 20B,20D,20E,20F,30E SD260034, U5B ,40E,C Splined nose MF Ag: 135,148,230,240,250, ,350,353,355,360,363,550 MF Ind: 20B,20D,20E,20F,30E 40,40E,C , 4600M, L555 Skid Loader E146 Loader, M434-4 Trencher Industrial, Marine A4.203, AD4.203 MF-155, 158, 165, 65, 650, 765 MF Ind: Hyster Challenger 860C Forklift M A4.203, AD4.203 MF-155, 158, 165, 65, 650, 765 MF Ind: 50 MF Ag: 165,174,265,274,275, ,377,383,387,565,575 MF Ind: 30D,50,50B,50D,50E MF165, 174, 174-4S, 184-4S, 265, 274, 274S, 275, 284, 284-4S, 373, 377, 383, 387, 565, 575 MF168,MF175,MF274,MF275 MF285,MF3050,MF365,MF373 MF375,MF377,MF383,MF387 MF440;Combine MF565, 575, 675 Ind: 50,50B,50E/EX, 50H/HX Ag: MF-178,185,188,194-4F, ,294S,294-4S,390,393, ,3060 Ind: MF50E, 60H Ag: MF-178,185,188,194-4F, ,294S,294-4S,390,393, ,3060 Ind: MF50E, 60H M, , , M91, , U5BG0027, ZZ90078 ZZ M1, , , , M91, M91, , 92484, 92485, U5BG0017 ZZ M1, 94441, 94454, , , ZZ90111, M M1, , M91, 94441, , ZZ , , , , 73629M , 94433, 94434, U5BG0052 ZZ9082, ZZ , , , , , , , F, , 84421, 84422, U5BG0026 ZZ , , , M91, U5BG0054, ZZ , , , M91, 94435, U5BG0024, ZZ90081, ZZ90143 Bolt on counterweights seal Snout: Keyed, 1 large bolt hole Bolt on counterweight seal Flange: Flat, No Centering Ring, 5 Bolt Holes, Seal Snout: 1 Bolt Hole, 2 Key Ways seal Snout: Splined, 1 bolt hole seal seal Snout:, 1 bolt hole Splined seal 6 bolt holes, hole Snout: Splined, 3 bolt, Snout: Splined and keyed Light Weight seal Snout: Straight, splined, 1 bolt hole seal Snout: Keyed & splined,1 bolt hole Heavy weight seal (800) ( 9 )
11 - Heavy Duty Crankshaft Catalog Perkins (continued) H M91 A , T Tractor: 3525,3545,3630,3650 Combine: 550,750,850,860 MF 27,29,31,500,510,515, ,535,699,800,805,840, ,1100,1134,1200,2620, ,2680,2685,2720,2725 A6.354,A ,A ,A6.372 MF27,29,31,500,515,520,525, ,699,800,805,840,845, ,1134,1200,2620,2640, ,2720, ,699,1014,1114,1134, ,2640,2645,2680,2685, ,3080,3090,3650 Combine: 24,27,29,31,530, ,565,620,625,660,665, H021, M , U5BG0035, ZZ , , , , , , , , , , , U5BG0045, ZZ , , 94460, U5BG0048, ZZ90090 U5BG0037, ZZ90113 Flange: Flat, 12 bolt holes, Snout: Keyed nose, 3 bolt holes 2 keyways seal Flange: Flat, 12 bolt holes Snout: 1 large bolt hole, Splined seal Flange: Flat,6 bolt holes, Snout: Splined & keyed,1 bolt hole seal Flange: 12 bolt holes Snout: 3 bolt holes, 2 keyways Scania (continued) L 6 cyl A46616 Case tractor: 2870, 4890, 4894 A46616, 56163M 8 bolt holes, 3 dowel holes Snout: with gear, 1 bolt hole 1 key way (800) ( 10 )
VOLVO. No. Part Picture Torman No. Original No. Description DAF. DAF Oil Pump F2800-3300 - 3600 Truck Models
DAF 1 T.0160-1 680705 DAF F2800-3300 - 3600 Truck Models 2 T.01141 683322 DAF - PACCAR 85CF - CF85 - F95 - XF95-95XF Truck Models 3 T.01180 682560 DAF - PACCAR F85 - F95 - XF95-95XF Truck Models 4 T.0169-2
VOLVO. No. Part Picture Torman No. Original No. Description DAF. DAF Oil Pump F2800-3300 - 3600 Truck Models
DAF 1 T.0160-1 680705 DAF F2800-3300 - 3600 Truck Models 2 T.01141 683322 DAF - PACCAR 85CF - CF85 - F95 - XF95-95XF Truck Models 3 T.01180 682560 DAF - PACCAR F85 - F95 - XF95-95XF Truck Models 4 T.0169-2
Heavy Truck & Trailer Parts. Engine Parts Partes de Motor
Heavy Truck & Trailer Parts Engine Parts Partes de Motor PISTON RING CUMMINS DETROIT KTC No. REPLACE SET MACK NAVISTAR PAI P.C TOP 2ND 3RD OIL 127-3803471 3803471 - - - 505025 S41889 Cummins NT855 218025
PARTS SECTION. Section MF2. Engine Systems; exhausts, cooling, fuel,.
PARTS SECTION Section MF2 Engine Systems; exhausts, cooling, fuel,. ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT DESCRIPTION; Radiator
CATALOG DCH0502. Diesel Cylinder Heads & Engine Accessories
CATALOG DCH0502 Diesel Cylinder Heads & Engine Accessories All ALLIANCE Cylinder Heads are: Magnafluxed for cracks Repaired and brought back to specifications Built with NEW guides, injector tubes, freeze
PARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
Replacement parts to fit JOHN DEERE CONTENTS. Important Ordering Information
CONTENTS SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 SECTION 7 SECTION 8 SECTION 9...JD-1-1 through JD-1-146 ENGINE SYSTEM...JD-2-147 through JD-2-161 ELECTRICAL...JD-3-162 through JD-3-179
FUEL PARTS CATALOGUE
FUEL PARTS CATALOGUE Wide Range of Fuel Injectors & Parts Including... Fuel Injectors Injector Pipes Injector Washers CAV Injector Pumps Injector Dust Seals CAV Pump Parts Injector Banjo Bolts Delphi Injector
REMAN ENGINES APPLICATION GUIDE
REMAN ENGINES APPLICATION GUIDE CNH REMAN ENGINES Today, there are more reasons than ever to choose CNH Remanufactured s for your equipment. From more engine choices to less downtime during installation,
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc
P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc Installation Timing Pin Location CAUTION: Before installing the injection pump, be sure that number 1 cylinder is at the Top Dead Center
Akerman Makina Sanayi ve Dış Tic. Ltd. Şti.
OEM Nr. Part info. AMC / JEEP / WILLYS 800517 4 CYL. ENGINE 2,2 CHILL CAST BEDFORD 20786 6 CYL. ENGINE (TRUCK) STEEL 2714513 6 CYL. ENGINE (TRUCK) STEEL 2714512 4 CYL. ENGINE (TRUCK) STEEL BMW 11 31 0
The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual. The sections that are found in the Engine Chapter are now renumbered.
NUMBER: 08 DD15-5 S.M. REF.: 1.11 ENGINE: DD15 DATE: July 2008 SUBJECT: CRANKSHAFT OIL SEAL SECTION PUBLICATION: DDC-SVC-MAN-0002 The Crankshaft Oil Seal Section has been added to the DD15 Workshop Manual.
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List Spicer Single Reduction 34,000-45,000 lbs AXIP-0089 November 2004 Table of Contents TABLE OF CONTENTS Spicer Axle Parts Book.......... 2 Forward Tandem Axle Differential
PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
Monster Mini Stock Assn rules for 2015
Monster Mini Stock Assn rules for 2015 *note 2 engine combinations* BODY - stock auto only may have complete aluminum body inner panel may be removed rear of car must be closed - no holes or flaps to meet
illustration ref. no. description SWAG no. RS Kombi, Octavia Scout 4x4, Octavia 4x4 for: Octavia, Octavia Kombi
Skoda protection Kit for strut 20 56 0003 - for: Fabia Skoda protection Kit for strut 30 56 0010 for: Felicia I, Felicia II - Skoda protection Kit for strut 30 56 0029, Octavia Kombi 4x4, Octavia RS, Octavia
Engine. 204-1890 Strobe light, 110V 204-1891 Strobe light, 220V 204-458 Replacement bulb. 204-1057 Compression gauge. 204-166 Dial indicator
The Strobe light checks the unit for: Balance of operating machinery RPM of motors, engine pulleys, fans, etc. Observe belt slippage Strobe light will stop action at speeds from 200 to 6000 RPM 204-1890
PART 2 FORKLIFT HYDRAULIC SYSTEM
PART 2 FORKLIFT HYDRAULIC SYSTEM Chapter 1 Description and Operation Component Locations & Circuit Layouts 1 Hydraulic Pump 11 Control Valve 14 Valve Section Oil Flows 15 Anti-Cavitation Valve 22 Velocity
FORD- F250-F750 Pickup
FORD- F250-F750 Pickup V6 4.2 Ltr Gas No. 1997 Ford Pickup 4.2 Ltr Gas B Uses TM-15/16, 119mm 8-Poly Groove - Top Port TM-15/16 1167 Inline-6 4.9 Ltr Gas No. 1996-1995 Ford Pickup 4.9 Ltr Gas B Uses TM-15/16,
Oregon Fuel Injection
Corporate Office: P.O. Box 21121, VE Pump Removal and Installation Cummins Lock Timed Applications Removal Clean the exterior of the injection pump and mounting surfaces. 1. Disconnect the fuel return
TREAD DESIGNS RADIAL AND BIAS
COLORADO OTR LP TABLE OF CONTENTS INTRODUCTION 3 Industry Standard 3 Application Vehicle Matching Chart 3 GENERAL INFORMATION 4 Structural Diagrams - Radial Tire 4 Definitions 5 Classifications 7 Uses
HydRAUlic brake PROdUcT catalog quick RefeRence
HydRAUlic brake PROdUcT catalog quick RefeRence PB-99127 Supplement Revised 10/08 From 2003 through 2008 2003 60mm Twin Piston R42R12068 R42R12068 MD1010 66mm Twin Piston R42R12067 R42R12067 MD1010 70mm
Illustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
Volkswagen To. Engine Crankshaft, Pistons. www.baumtools.com sales@baumtools.com. 800-848-6657 Toll Free 941-927-1414 Intl' 941-927-1612 Fax
- FLYWHEEL LOCK Locks flywheel in place during removal and installation. Audi - 4, AAN VW - Fox, Dasher, Quantum - CLUTCH PILOT BEARING PULLER Replaced by W88. Audi - 4, 5 984< VW - Vanagon -5 MOUNTING
EveryTM. Coverage. North American Truck Coverages For ISL9, ISC8.3 And ISB6.7 Engines.
EveryTM Coverage. North American Truck Coverages For ISL9, ISC8.3 And ISB6.7 Engines. EveryTM Confidence. You can have confidence knowing that your EPA 2010 engine is backed by the total coverage of Cummins
HAND PALLET TRUCK Lift-Rite
HAND PALLET TRUCK Lift-Rite Before you Order: To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the loweredheight models (MINI or CHEP).
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 6cyl. With Joint for GSFRCAA6,GPRE17 &GLVW. CAV Part no: 7135-29A
A Gasket & Seal Kit for a CAV Fuel Injection Pump. Fitted to AAL/R 6cyl. With Joint for GSFRCAA6,GPRE17 &GLVW. CAV Part no: 7135-29A 6pcs Delivery Valve Washers 5936-161 6pcs Element Barrel Locking Washers..7033-379
DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
*Specify Oversize When Ordering
Cylinder Block Deck Cracks On Caterpillar 3208 Engines and Caterpillar explain how to inspect the Caterpillar 3208 engines for block cracks. Part No. Location Insert OD Size Depth Tapered ID 3906854 Intake
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
REMAN ENGINES APPLICATION GUIDE
REMAN ENGINES APPLICATION GUIDE CNH REMAN ENGINES Today, there are more reasons than ever to choose CNH ufactured Engines for your equipment. From more engine choices to less downtime during installation,
INTERNATIONAL RA351 FRONT - REAR AXLE
PARTS LISTED IN THIS CATALOG ARE NOT NECESSARILY MANUFACTURED BY THE ORIGINAL EQUIPMENT MANUFACTURER AND ANY REFERENCE TO THE TRADEMARKS OR PART NUMBERS OF OTHERS ARE FOR CROSS REFERENCE INFORMATIONAL
Edmonton, AB. April 26 30, 2016 (Tue Sat) Late additions. rbauction.com. Unreserved public auction. 3 of 8 Caterpillar 631E.
Late additions Edmonton, AB April 26 30, 2016 (Tue Sat) Unreserved public auction 3 of 8 Caterpillar 631E 2014 Volvo L220G 2015 Western Star 4900SA & 2014 Scona TRAPVC3A 2011 John Deere 648H 2 2015 Kenworth
Illustrated Parts List
More time on the road Illustrated s List FRLO-640C-T November 0 Contents How To Use The Illustrated s List... CASE ASSY... 4 COUNTERSHAFT & BRGS(AUX)... COUNTERSHAFT ASSY... 8 ELECTRONIC CONTROL UNIT...
ALUMINIZED EXHAUST COMPONENTS FORD. Replaces FORD Part No. D5HZ-5246AC Inlet Pipe RH L, LN, LNT, LT, LTS 8000 Series with Caterpillar 3208N Engines
ALUMINIZED EXHAUST COMPONENTS FORD Replaces FORD Part No. D8HZ-5246M Inlet Pipe L, LN, LNT, LT 9000 Series with Cummins NTC Engines. Replaces FORD Part No. D5HZ-5246AC Inlet Pipe RH L, LN, LNT, LT, LTS
PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C**
Service Data Vickers Piston Pumps Low Noise Industrial Piston Pump PVQ 40-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 PVQ 45-B2/M2 * *** - ** * * - 10 C** *** *** * - 10/11/12/20 C, CM Compensator
EveryTM. Coverage. North American Truck Coverages For 2013 ISL9 And ISB6.7 Engines.
EveryTM Coverage. North American Truck Coverages For 2013 ISL9 And ISB6.7 Engines. EveryTM Confidence. You can have confidence knowing that your Cummins 2013 engine is backed by the total coverage of Cummins
1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE
TRAILER AXLE SPINDLE HARDWARE FRUEHAUF "PRO-PAR" AXLE AND MERITOR EARLY MODEL TP AXLE R001561 Lockwasher 12402, 42203, 5402, 65463, E1561, L1893, L893, M1051 PIN SIZE THICK O.D. I.D. DIA. LGTH 7/32" 5-1/16"
VS4760.V2. Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines. Model No: 1. SAFETY INSTRUCTIONS
Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines Model No: VS4760.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according
New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan
AGRICULTURE GARDENING New MITSUBISHI Compact Tractor range: Strong, versatile, reliable, valuable. Made in Japan ENGINE Engine Nº of Cylinders Displacement Rated RPM (25) Water Cooled Diesel 1,125 cc 2,500
Cylinder head, removing and replacing
15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
Fig 1 Power Transmission system of Tractor
POWER TRANSMISSION SYSTEM Transmission is a speed reducing mechanism, equipped with several gears (Fig. 1). It may be called a sequence of gears and shafts, through which the engine power is transmitted
2740 Whitten Rd Bldg 103 Memphis, TN 38133 Telephone 901-380-9290 Email Bwilliams@Dieselcare.net
Fuel Injection Pump Replacement REMOVAL Diesel Care & Performance Inc 1. Disconnect negative battery terminal. 2. Remove throttle linkage. Fuel Injection Pump Bracket 3. Remove injection pump bracket.
Maintenance & Repair Manual
Maintenance & Repair Manual 2 0 1 1-2 0 1 2 A COMPLETE GUIDE TO RUBBER IMPELLER PUMP IDENTIFICATION & REPAIRS Why Service With Sherwood The seawater pump is the heart of the marine engine, supplying a
REPLACEMENT INBOARD STARTERS
30433 (NEW) Value Priced! Standard Duty Direct O.E.M. replacement gear reduction starter. Fits: All GM engines with 14 flywheel using a staggered bolt pattern. Recommended for late model 3.0 Liter with
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 2 of 15 Carburetor 1 93205A 1 Repair Kit 2 93205A 1 Repair Kit 3 93205A 1 Repair Kit 4 93205A 1 Repair Kit
MERCEDES. Waterpump / Devirdaim 124.10.20301 124.10.20102 124.10.20302 124.10.20502 124.10.20002 124.10.20202 124.10.22401 124.10.22402 124.10.
MERCEDES 124.10.20301 3552000801 3552000101 3552000601 3552000901 3552001101 3352001501 OM 355 OM 355A TAM R TAKIMI 124.10.20102 REPAIR KIT Impeller 120x15 mm 3552001204 3552000804 OM 355 OM 355A 124.10.20302
World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
Service Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES
STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES Prepared By: BRANDON BALDWIN CANINO SCHOOL OF ENGINEERING TECHNOLOGY AUTOMOTIVE TECHNOLOGY
Evolution of the Flathead Compiled by Fred Mills
Evolution of the Flathead Compiled by Fred Mills Here is the 221-239-255 cube U.S.A. flathead block story with pictures, to the best of my knowledge and ability to collect pictures so far. In the beginning
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
MARINE DIESEL ENGINE REPAIR SCHOOLS. Receiving a instructions marine diesel engine repair schools for the new invention
MARINE DIESEL ENGINE REPAIR SCHOOLS Receiving a instructions marine diesel engine repair schools for the new invention MARINE DIESEL ENGINE REPAIR SCHOOLS Many of the guide are around for free while some
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Donaldson Vehicle Card Hitachi
Donaldson Vehicle Card Hitachi INDEX INDEX AERIAL WORK PLATFORM 1 BULLDOZER 1 CRAWLER EXCAVATOR 1 CRAWLER CARRIER 1 CRAWLER CRANE 2 CRAWLER CRANE DRAGLINE 5 CRAWLER EXCAVATOR 5 CRAWLER MINI EXCAVATOR 25
EveryTM. Coverage. North American Truck Coverages For ISX15 And ISX12 Engines.
EveryTM Coverage. North American Truck Coverages For ISX15 And ISX12 Engines. North American Heavy-Duty Truck Coverages. How could we make Cummins Heavy-Duty base engine warranty coverage better than it
CAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
HT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
Guí a de Nuevos Productos. 2011 Trimestre 1
Guí a de Nuevos Productos 2011 Trimestre 1 24017 de Cabina Jeep Grand Cherokee V6 3.6L (2011) Reemplaza: Chrysler 68079487AA 24157 Refrigerante Filtro Various Komatsu Equipment Reemplaza: Komatsu 6004111161
Standard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks
TITAN pt. no.: 03 0000 0120 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60
239S SUPER LUBE SUPREME SAE 10, 30, 50 AND 60.Super Lube Supreme is a premium high performance para- synthetic, fluid that is specially formulated to provide superior protection and performance in powershift
Suspension and Steering Systems Operation. The Steering/Suspension System (Overview)
Suspension and Steering Systems Operation Below is an overview of the suspension and steering systems The Steering/Suspension System (Overview) "Suspension," when discussing cars, refers to the use of
Common Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
Information and Instructions
Information and Instructions This shop manual contains several sections each covering a specific group of wheel type tractors. The Tab Index on the preceding page can be used to locate the section pertaining
1993 VOLKSWAGEN ENGINES 2.5L 5-Cylinder. EuroVan
Article Text ARTICLE BEGINNING 1993 VOLKSWAGEN ENGINES 2.5L 5-Cylinder EuroVan * PLEASE READ THIS FIRST * NOTE: For engine repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES
The smart route to performance.
M e r i t o r T r a n s i t B u s a n d C o a c h A x l e s The smart route to performance. Meritor Transit Bus and Coach Axles FH-946 The Industry s Axle Leader. With more than a century of axle-manufacturing
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
Marine Diesel Engine VF4 VF5 VF4.140E VF4.170E VF5.220E VF5.250E. Service Manual
Marine Diesel Engine VF4 VF5 Service Manual VF4.140E VF4.170E VF5.220E VF5.250E Copyright 2009 Vetus N.V. Schiedam Holland Reproduction of text and illustrations, in whole or in part, is strictly prohibited.
MERITOR/WABCO STYLE TRACTOR & TRAILER ABS VALVE INFORMATION
MERITOR/WABCO STYLE TRACTOR & TRAILER ABS VALVE INFORMATION DISCLAIMER All of the pictures, specifications, descriptions, text and other data in this catalog have been carefully checked and researched
H1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
Mercedes Benz. Spare parts for trucks. Qualität made by dph Germany. Dichtungspartner Hamburg. Mercedes Benz Spare parts for trucks 2006 1
Mercedes Benz Spare parts for trucks Qualität made by dph Germany Dichtungspartner Hamburg Mercedes Benz Spare parts for trucks 2006 1 Important notes 1. This catalogue replaces all previous issues. 2.
CROSS REFERENCE. Cross Reference Index 110-122. Cast ID Number 110-111 Connector ID Number 111 Engine ID Number 112-122. 2015 Ford Motor Company 109
CROSS REFERENCE Cross Reference Index 110-122 Cast ID Number 110-111 Connector ID Number 111 112-122 2015 Ford Motor Company 109 CROSS REFERENCE Cast ID Number Cast ID Ford Service # MC Part # Part Type
Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
Sparex Replacement Spare Parts for Ford/New Holland (65>) Page No. Seats and Cab
for Ford/New Holland (65>) Page 1 Beacons, Brackets, Mirrors and Related Components Seats and Cab Related Components 2 Wipers and Related Components 3 Seats 4 Seat Components 5-6 Cab Glass - Worldwide
160, 161 and 164 Series Drive axle parts
160, 161 and 164 Series Drive axle parts PB-9250 Revised 09-10 FIGURE 1 FORWARD CARRIERS OF TANDEM AXLES (USE WITH CHART 1) Circled numbers are diff. lock parts or parts that change when diff. lock is
Heavy-Duty Class 4 8 Trucks
Quick Finder Index Engineered in the U.S.A. Lifetime Marathon Warranty Sleeve Pullers & Installers......... 224 225 Diesel Engine Tools.............. 226 230 Truck Clutch Tools............... 231 232 U-Joint
STARTER MOTOR STOCK STARTER MOTOR STOCK
MOTOR STOCK MOTOR STOCK Page 1: last updated Tue Aug 9 04:20:01 BST 2016 0-001-106-001 0-001-106-002 0-001-107-003 0-001-107-004 0-001-107-005 0-001-107-006 0-001-107-007 0-001-107-008 0-001-107-009 0-001-107-012
WWW.SANDSTRUCK.COM ISO CERTIFICATION AIR & BRAKE CAB & BODY SWITCHES. Search Online _
ISO CERTIFICATION S&S Truck Parts, Inc is certified as an ISO 9001:2008 compliant organization. The certification is accredited by Perry Johnson Registrars (PJR). The certification of compliance with ISO
Figure 2 Chrysler 2.4L head retorque
Recommended Engine Oil For 2004-2007 Chrysler Engines The following information refers to recommended engine oil for 2004-2007 Chrysler engines. This information should be considered any time the engine
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (20% VAT) Price (excl VAT) 022298 Alloy cylinder barrel, 86mm bore, 1956-on short-stroke CS models. 240.00 200.00 000217 Nut for cylinder base stud,
FEMA's SCHEDULE OF EQUIPMENT RATES
DEPARTMENT OF HOMELAND SECURITY FEDERAL EMERGENCY MANAGEMENT AGENCY RECOVERY DIRECTORATE PUBLIC ASSISTANCE DIVISION WASHINGTON, D.C. 20472 The rates on this Schedule of Rates are for applicant-owned equipment
STEERING SYSTEM - POWER
STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and
SECTION WASHERS AND GASKETS
SECTION WASHERS AND GASKETS 8 SECTION INDEX 8a 8b 8c 8d 8e 8f 8g 8h Aluminium washers Copper sealing washers Bronze sealing washers Nylon washers Paper gaskets Rubber gaskets O.R. Oil seals WASHERS AND
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
2008:1 Supplement Volvo
2008:1 Supplement Volvo Scan-Tech Sweden Volvo Catalog Supplement 2008:1. Model Engine Year O/E Ref Part No Application Description Engine V70XC 1997~00 9161101 51.1101 AWD Engine Mount S40/V40 4-Cyl.Petrol,
Canopy dimensions & fittings guide
Issue 3.1 March 2008 Canopy fitting guide 1 Canopy dimensions & fittings guide This document is to be consulted at the time of viewing the vehicle to determine the correct canopy for the customer. Many
ADVANCE ADAPTERS INC. Fixed Yoke kit (S.Y.E. Kit)
ADVANCE ADAPTERS INC. Fixed Yoke kit (S.Y.E. Kit) Instruction Sheet P/N: 50-7905 & 50-7906 KIT CONSISTS OF: No. Qty Part No. Description 1. 1 51-7906 TAILHOUSING, DIECAST 2. 1 52-7905 SHAFT, MAIN OUTPUT
JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS
OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length