DURA GRATING - TECHNICAL SPECIFICATIONS - January 2014
|
|
- Anthony Phillips
- 7 years ago
- Views:
Transcription
1 DURA GRATING - TECHNICAL SPECIFICATIONS - January Definition Glass-reinforced plastic (GRP or fibreglass) is a composite material made of a thermosetting plastic resin reinforced by fine fibres of glass along with the use of additives and is commonly referred to by the name of fibreglass 1.1 Applications GRP is an immensely versatile material which combines lightweight with inherent strength to provide a resilient finished product with a variety of surface textures and a virtually unlimited colour range available. By selecting the appropriate combination of fibreglass reinforcements, resins and processing techniques, the engineer can create a product or component to meet the most demanding of specifications. 2.1 Benefits High strength, light weight, dimensional stability, corrosion/chemical/electrical resistance, low tooling/installation cost, long life. GRP products compete very favourably on a performance/life cycle cost basis versus traditional materials. 2.2 Open Area Dura Grating Standard 25mm, 30mm, 38mm thickness panels have a 68% Open Area. Dura Grating Standard 13mm, 50mm thickness panels have a 78% Open Area. Dura Grating Mini 14mm, 22mm, 30mm, 38mm thickness panels have an Open Area of 42% Dura Grating Micro 22mm, 30mm thickness panels have an Open Area of 36% 2.3 Raw Material Characteristics Two main components produce composite GRP: polyester resin and glass fibres. Isopthalic polyester resin is used to manufacture Dura Grating Standard Mesh due to its great compromise of performance and cost. Orthopthalic resin used to manufactuer Dura Grating Mini Mesh and Phenolic & Vinylester resin is available by special order according to project needs. 2.4 Typical Material Properties Resin Glassfibre Density kg/m³ (Specific Gravity) Hardness (Barcol) Tensile Strength Mpa Modulus of Elasticity GPa / (Tensile Modulus) Compressive Strength MPa Flexural Strength MPa Interlaminate Shear Strength MPa Na 9 Water Absorption % Voltage breakdown (k volts/mm) - 18 Thermal Conductivity W/m o C Max Operating Temp (deg. o C) Specific Heat (kj/kg o C 2.3 na 2.5 Product Dura Grating is a moulded non-slip composite floor grating system constructed from fibreglass as an ideal and cost effective alternative to traditional floor grating materials like mild steel, stainless steel grating, aluminium or wood. Dura Grating grid flooring is durable, lightweight and chemical and corrosion resistant which makes it ideal for the industrial, chemical, construction and shipping industries.
2 The finished product is produced in several panel thickness sizes and panel length/width sizes. Bespoke panel size options are available upon request. 2.6 Size Specification Dura Grating Standard Mesh Grating Panel Size (mm) Thickness Length Width Open Mesh Size Weight (Kg/m2) Panel Weight (Kg) x50M45x45H x50M45x45H x38M32x32H x38M32x32H x38M32x32H x38M32x32H x38M32x32H x38M32x32H x50M42x42H x50M42x42H Dura Grating Mini Mesh Grating Panel Size (mm) Thickness Length Width Open Mesh Size Weight (Kg/m2) Panel Weight (Kg) x x x x x x x x x
3 Dura Grating Micro Mesh Grating *Special Order Only Panel Size (mm) Thickness Length Width Open Mesh Size Weight (Kg/m2) Panel Weight (Kg) x x x x x x Bearing Specification bearing capacity and panel deflection depend on panel thickness and unsupported span. Dura Grating Standard Mesh Grating - and Deflection 1% Deflection) Panel Thickness (mm) Span Type of ing 250mm 500mm 600mm 750mm 1000mm 1200mm 1500mm 2000mm 79kg 20kg 14kg 9kg 5kg 3kg 2kg 1kg UDL 570kg 158kg 92kg 47kg 20kg 11kg 6kg 2kg 1,585kg 464kg 322kg 206kg 116kg 80kg 51kg 29kg UDL 2,751kg 1,375kg 850kg 435kg 184kg 106kg 54kg 23kg 2,381kg 836kg 581kg 372kg 209kg 145kg 92kg 52kg UDL 4,761kg 2,381kg 1,765kg 904kg 381kg 221kg 113kg 48kg 3,814kg 1,698kg 1,179kg 755kg 424kg 294kg 188kg 106kg UDL 7,629kg 3,814kg 3,179kg 1,834kg 774kg 448kg 229kg 97kg 5,933kg 2,967kg 2,414kg 1,545kg 868kg 603kg 386kg 217kg UDL 11,866kg 5,933kg 4,944kg 3,754kg 1,584kg 916kg 469kg 198kg
4 Dura Grating Mini Mesh Grating - and Deflection 1% Deflection) Panel Thickness (mm) Span Type of ing 250mm 500mm 600mm 750mm 1000mm 1200mm 1500mm 2000mm 397kg 99kg 69kg 44kg 37kg 25kg 17kg 8kg UDL 1,118kg 334kg 194kg 99kg 42kg 24kg 12kg 5kg 1,091kg 316kg 220kg 141kg 118kg 79kg 55kg 26kg UDL 2,260kg 1,062kg 615kg 315kg 133kg 77kg 39kg 17kg 2,340kg 925kg 643kg 411kg 231kg 161kg 76kg 58kg UDL 4,867kg 3,118kg 1,804kg 924kg 390kg 226kg 115kg 49kg 3,721kg 1,864kg 1,294kg 828kg 466kg 324kg 207kg 116kg UDL 7,740kg 6,281kg 3,225kg 1,861kg 785kg 454kg 233kg 98kg Dura Grating Micro Mesh Grating - and Deflection 1% Deflection) Panel Thickness (mm) Span Type of ing 250mm 500mm 600mm 750mm 1000mm 1200mm 1500mm 2000mm 1,249kg 362kg 251kg 161kg 91kg 63kg 40kg 23kg UDL 2,597kg 1,220kg 706kg 361kg 153kg 45kg 28kg 19kg 2,459kg 972kg 675kg 432kg 243kg 169kg 108kg 61kg UDL 5,114kg 2,557kg 1,896kg 971kg 410kg 121kg 76kg 51kg 4.0 Product Specifications Characteristics Unit Reference Tensile Strength 220Mpa ASTM D Modulus of Elasticity 21Gpa ASTM D Flexural Strength 280Mpa ASTM D Compressive Strength 145Mpa ASTM D Voltage breakdown 18K volts/mm ASTM D149 Density kg/m³ (Specific Gravity) 2100 ISO 9001 Thermal Expansion Factor 13 x 10-6 mm/mm o C ISO 9001 Water Absorption rate 0.45 x 24 hrs ASTM D570 Operating Temperature -100 o C to +200 o C ISO 9001 Flammability resistance Class 2, Option of Class 2, 1 or Class 0 BS476 Part 7 & 6 Frost resistance No Effect DD CEN/TS :2006 Weather ability Pass MOAT 22 Anti-Slip Surface 0.82 CoF (with anti-slip finish only)_ BS UV Weather 5000hrs ISO Xenon Arc 4.1 Testing Standards Fire Certificate Standard Iso Resin - BS 476 Part 7 Class 2. Special Order Iso Resin - BS 476 Part 7 Class 1. Special Order Phenolic Resin - BS 476 Part 6 & 7 Class 0. ASTM-E84 Flame Spread 25, Smoke Density 325
5 4.2 Slip Certificate BS Ramp Test, Dura Grating Mini Mesh Wet 0.76 Cof. BS Ramp Test, Dura Grating Standard Wet 0.82 Cof. BS Ramp Test, Dura Grating Standard Oil 0.78 Cof. 4.3 Certificate BS EN 124 Class A UV Certificate UV Weather ISO Xenon Arc 5000hrs 4.5 Colour and Surface Finish Standard stock colours are Light Grey and Green for Standard Grating. Light Grey, Green and Sand for Mini Mesh. Bespoke colours are available (Colour range is more limited for Class 1 & 0 fire rated product). Supplied in smooth or gritted (Silicone Carbide), different grit sizes are available.
6 5.0 Chemical Resistance Dura Grating standard product is resistant against wide a range of chemicals across wide temperature spectrum. Dura Grating can be made of different resin systems to achieve specific chemical resistance. RESIN TYPE Vinylester Isophthalic Orthophthalic Environment %Conc. Max.Oper. Temp.F/C. %Conc. Max.Oper. Temp.F/C. %Conc. Acetic Acid / /52 25 N/R Aluminum Hydroxide / /71 ALL - Ammonium Chloride ALL 210/99 ALL 170/77 ALL - Ammonium Bicarbonate / /52 ALL - Ammonium Hydroxide /38 28 N/R ALL N/R Ammonium Sulfate ALL 210/99 ALL 170/77 ALL - Benzene ALL N/R ALL N/R ALL N/R Max.Oper. Temp.F/C. Benzoic Acid SAT 210/99 SAT 150/66 ALL 77/25 Borax SAT 210/99 SAT 170/77 ALL - Calcium Carbonate ALL 180/82 ALL 170/77 ALL - Calcium Nitrate ALL 210/99 ALL 180/82 ALL - Carbon Tetrachloride / N/R 100 N/R Chlorine Dry Gas - 210/99-140/60 - N/R Chlorine Water SAT 200/93 SAT 80/27 SAT N/R Chromic Acid / /21 5 N/R Citric Acid ALL 210/99 ALL 170/77 ALL 77/25 Copper Chloride ALL 210/99 ALL 170/77 ALL 104/40 Copper Cyanide ALL 210/99 ALL 170/77 ALL 77/25 Copper Nitrate ALL 210/99 ALL 170/77 ALL - Ethanol / / /25 Ethylene Glycol / / /40 Ferrous Chloride ALL 210/99 ALL 170/77 ALL 86/30 Formaldehyde ALL 150/ / Glucose / /77 Gasoline / / /25 Glycerin / / Hydrobromic Acid / / Hydrochloric Acid / / /30 Hydrogen Peroxide / /38 5 N/R Lactic Acid ALL 210/99 ALL 170/77 ALL 77/25 Lithium Chloride SAT 210/99 SAT 150/66 ALL - Magnesium Chloride ALL 210/99 ALL 170/77 ALL 104/40 Magnesium Nitrate ALL 210/99 ALL 140/60 ALL 86/30 Magnesium Sulfate ALL 210/99 ALL 170/77 ALL 104/40 Mercuric Chloride / / /40
7 RESIN TYPE Vinylester Isophthalic Environment %Conc. Max.Oper. Temp.F/C. Orthophtha lic %Conc. 140/60 ALL 104/40 Max.Oper. Temp.F/C. %Conc. Max.Oper. Temp.F/C. Nickel Sulfate ALL 210/99 ALL 170/77 ALL 104/40 Nitric Acid / /21 2 N/R Oxalic Acid ALL 210/99 ALL 75/24 ALL N/R Perchloric Acid /38 10 N/R 10 N/R Phosphoric Acid / /49 80 N/R Potass.Chloride ALL 210/99 ALL 170/77 ALL 104/40 Potassium Dichromate ALL 210/99 ALL 170/77 ALL 77/25 Potassium Sulfate ALL 210/99 ALL 170/77 ALL 104/40 Propylene Glycol ALL 210/99 ALL 170/77 ALL 104/40 Sodium Acetate ALL 210/99 ALL 160/71 ALL 104/40 Sodium Bisulfate ALL 210/99 ALL 170/77 ALL - Sodium Bromide ALL 210/99 ALL 170/ Sodium Cyanide ALL 210/99 ALL 170/77 5 N/R Sodium Hydroxide /82 N/R N/R 1 N/R Sodium Nitrate ALL 210/99 ALL 170/77 ALL 104/40 Sodium Sulfate ALL 210/99 ALL 170/77 ALL 104/40 Stannic Chloride ALL 210/99 ALL 160/71 ALL 104/40 Sulfuric Acid / / Tartaric Acid ALL 210/99 ALL 170/77 ALL - Vinegar / /77 ALL - Water Distilled / /77 ALL 86/30 Zinc Nitrate ALL 210/99 ALL 170/77 ALL 104/40 Zinc Sulfate ALL 210/99 ALL 170/77 ALL 104/40
8 6.0 Dura Grating Standard S/S Fixings & Accessories 6.1 Surface Mounted Fixings Small & Large Dome Head Washer To Suit Grating Mesh: Standard 32x32 Large Dome Washer Standard 42x42 Not Suitable Mini Large and Small Dome Washer Micro Small Dome Washer.2 Recessed Fixings M8 Square Recessed 32x32 & 42x42 42x42 32x32 To Suit Grating Mesh: Standard 32x32 Square Recessed 32x32 Standard 42x42 Square Recessed 42x42 Mini Square Recessed 32x32 (Cutting required, see drawing) Micro Square Recessed 32x32 (Cutting required, see drawing)
9 6.3 M Clips Standard and Mini M8 Standard 32x32 M8 Standard 42x42
10 M6 Mini Mesh Shallow M6 Mini Mesh Deep To Suit Grating Mesh: Standard 32x32 M Clip 32x32 Standard 42x42 M Clip 42x42 Mini Shallow and/or Deep. Shallow 14mm, Deep 22mm, 30mm, 38mm. Micro Not Suitable 6.4 G Clamps To Suit Grating Mesh: Standard 32x32 G Clamp Available for all Thicknesses Standard 42x42 G Clamp Available for all Thicknesses, accept 13mm Mini G Clamps Available for all Thicknesses, accept 14mm Micro G Clamps available for all Thicknesses, accept mesh cutting required (Mini G Clamps Used)
11 6.5 M8 J Clamp Suits all Grating Mesh (Cutting Required for Mini & Micro to suit M8) 6.6 M8 Channel Clamp Suits all Grating Mesh (Cutting Required for Mini & Micro to suit M8)
12 Special Bolt Fixings to Suit Clip and Type of Substrate are available. 7 Safety Data Sheet This section provides data for protection against substances hazardous to health. 7.1 Material Identification and Use Chemical Name: Fibreglass Reinforced Polyester Common Name: GRP (Glass Reinforced Plastics, Fibreglass) Product Identification: Dura Grating Uses: Structural Flooring, Duct Cover, Trench or Gully Covers, Man Hole Cover. 7.2 Composition E Glass fibres (Uni-Directional), Stitched Chop Strand Matt, Woven Roving Comb Matt, thermosetting plastic resin, catalysts, styrene, aluminium oxide, pigments. UV Inhibitor. Components are chemically and thermally cured and bonded together. 7.3 Hazard Identification None by contact. Dust produced by cutting or grinding can penetrate pores and skin causing itching. Avoid breathing dust. First Aid procedure: Skin shower with water and soap. Eyes flush with sterile eye wash solution. 7.4 Product Appearance Open or closed profiles. Sharp edges. Zero odours. Not solvable in water. Standard colour Grey RAL 7047, others available on request. 7.5 Fire Fighting Measures Standard extinguishing equipment, water, foam, A, B or C fire extinguishers. Produces black smoke while burning, carbon particles. Use air respirator. 7.6 Waste Disposal Product is not considered a hazardous waste. Abide by local laws and procedures. 7.7 Handling/Cutting Wear masks and goggles when cutting or grinding. Cover exposed parts of the body. Wear gloves when moving or lifting. Use diamond tipped tools for cutting. 8.0 Product Warranty 25 Year Warranty. Details available on request. Company Information Head Office UK Dura Composites Ltd Unit 14, Telford Road, Clactonon-Sea Essex CO15 4LP United Kingdom Tel: +44 (0) Fax: +44 (0) info@duracomposites.com
DURA SLAB MOULDED TECHNICAL SPECIFICATIONS JANUARY 2014
DURA SLAB MOULDED TECHNICAL SPECIFICATIONS JANUARY 2014 Definition Glass-reinforced plastic (GRP) is a composite material made of a thermosetting plastic resin reinforced by fine fibres of glass along
More informationDURA SLAB PULTRUDED INDUSTRIAL SECTOR TECHNICAL MANUAL
DURA SLAB PULTRUDED INDUSTRIAL SECTOR TECHNICAL MANUAL For Use In: Substations, Water Treatment Plants, Road/River Bridges, Off Shore Platforms, Industrial Plants, Schools, Hospitals, Warehouses, Factories,
More informationHeavy Duty Fibreglass Floor Grating
Heavy Duty Fibreglass Floor Grating Anti-slip Fibreglass Grating DURA TREAD Gritted Anti-Slip Surface Prevents Slips, Trips & Falls in the Workplace INDUSTRIAL High performance composites DURA TREAD Range
More informationComposite Decking. For commercial and residential decking projects. Dura Deck
Composite Decking Wood Plastic Composite (WPC) Low Maintenance Easy to Install Barefoot Friendly Advanced Below Surface Fixings Eco Friendly For commercial and residential decking projects Dura Deck...designed
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More informationFabcograte FRP Grating. Tolerances: ±1/16. Tolerances: ±1/16. THICKNESS BAR SPACING PANEL SIZE (FT.) WT (LBS) 1" 1.5" x 1.
Features: Will not rust. Corrosion resistant. Non-sparking. Fire retardant. Non-conductive. Maintenance free. Molded-in color. Light weight. Easy to install. Impact resistant. Quality appearance. Fabcograte
More informationTechnical Brief. Thermowell Materials Service Guide K EY C ONSIDERATIONS: Common Materials
Technical Brief K EY C ONSIDERATIONS: Operating Temperature Operating Environment Velocity & Pressure thermowell material is usually chosen based on the corrosion conditions the well will face. Thermowell
More informationSpill Containment. Contents
Contents IBC Bund, Spill Pallet or Sump Pallets 3-9 IBC Spill Containment Bund - User Healthy & Safety Instructions Spill Trays, Drum Bunds & Drum Pallets 11-18 Tank Bunds 19-21 Standard Sized Bunds 22
More informationSafety Data Sheet Aluminium profiles Apply for alloys Sapa EN AW 6060, 6063, 6005, 6005A, 6082, yellow chromated, with or without powder coating.
Apply for alloys Sapa EN AW 6060, 6063, 6005, 6005A, 6082, yellow chromated, with or without powder coating. 1. Identification of the Substance/Preparation and Company Product name: (Alloys, Sapa EN AW
More informationConstruction. 3-part thixotropic epoxy patching mortar. Product Description. Tests
Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages
More information3M Scotchkote Fusion-Bonded Epoxy Coating 134
3M Scotchkote Fusion-Bonded Epoxy Coating 134 Data Sheet and Application Guide February 2016 Handling and Safety Precautions: Read all Health Hazard, Precautionary and First Aid, Material Safety Data Sheet,
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. July 1, 2008 Revision 2
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES 1 PART 1 - GENERAL 1.0 GENERAL 1.1 REFERENCES: SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS
More informationRoyal Edge Re-Flex TPO Chemical Resistance Guide
While it is difficult to foresee all chemicals, chemical combinations, and environments to which RPI Royal Edge TPO Roofing Membrane may be subjected, the following information is suggested to help guide
More informationTECHNICAL REPORT HOLLOW POLYCARBONATE
TECHNICAL REPORT HOLLOW POLYCARBONATE A Brief Introduction Polycarbonate is a very well-known engineering thermoplastic, as clear as glass and as resistant as steel, it is a carbon derivative that gathers
More informationAraldite AV 170. Advanced Materials. One component epoxy adhesive. Structural Adhesives. Key properties. Description. Product data.
Advanced Materials Araldite AV 170 Structural Adhesives Araldite AV 170 One component epoxy adhesive Key properties Cures at 140-180 C Heat resistant to 120 C Very good peel strength Good chemical resistance
More informationINCOMPATIBILITY OF COMMON LABORATORY CHEMICALS
INCOMPATIBILITY OF COMMON LABORATORY CHEMICALS When certain hazardous chemicals are stored or mixed together, violent reactions may occur because the chemicals are unsuitable for mixing, or are incompatible.
More informationSafety Data Sheet Customwood MDF
1. IDENTIFICATION OF THE MATERIAL AND SUPPLIER. Product Details Product Name: Other Names: Manufacturer s code: U.N. Number: Dangerous Goods Class: HAZCHEM Code: Toxic Substances Schedule: Uses: Customwood
More informationFIBREGRATE Grating PRODUCT CATALOGUE. How is FIBREGATE made? What is FIBREGATE Grating? FIBREGATE Product Gallery GRATING
Maskell manufacture and supply a complete range of fibreglass (FRP/GRP) moulded grating for longevity and corrosion resistance in industrial applications is available in a full range of types and thicknesses
More informationTwo component epoxy paste adhesive. Ideal for bonding GRP, SMC and dissimilar substrates
Advanced Materials Araldite 2015 Structural Adhesives TECHNICAL DATA SHEET Araldite 2015 Two component epoxy paste adhesive Key properties Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationTwo component epoxy paste adhesive
Advanced Materials Araldite 2015 Structural Adhesives TECHNICAL DATA SHEET Araldite 2015 Two component epoxy paste adhesive Key properties Toughened paste Ideal for bonding GRP, SMC and dissimilar substrates
More informationMaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
More informationALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
More informationScotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013
Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good
More informationProper chemical storage is required to minimize the hazards associated leaks, spills, and accidental mixing of incompatible chemicals.
CHEMICAL STORAGE Proper chemical storage is required to minimize the hazards associated leaks, spills, and accidental mixing of incompatible chemicals. General Storage Guidelines Observe the following
More informationSpill Containment. Contents
Contents IBC Bund, Spill Pallet or Sump Pallets 2-14 IBC Bunds - User Healthy & Safety Instructions 15-16 Spill Trays, Drum Bunds & Drum Pallets 17-25 Tank Bunds 26-28 Standard Sized Bunds 29 Custom Built
More informationJACKSON SAFETY* G80 Nitrile Chemical Resistant Gloves. Chemical Resistance Guide
JACKSON SAFETY* G80 Nitrile Chemical Resistant Gloves Chemical Resistance Guide This guide presents the results of ASTM F739 standard permeation testing and degradation ratings for the JACKSON SAFETY *
More informationRubber Lining. Your guide to productive rubber lining solutions
Rubber Lining Your guide to productive rubber lining solutions Our solutions Our skilled staff and dialogue with the clients make us stand out from the other operators in the field. With solid knowledge
More informationCable ladder installation at S.C.M. Chemicals Limited s titanium dioxide Plant in Western Australia
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables.
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationScotch-Weld TM. DP410 Off-White. Product Data Sheet. Product Description. Key Features Rapid cure at room temperature; cure rate may be accelerated
Scotch-Weld TM Product Data Sheet DP410 Off-White Supersedes: October 2001 Product Description DP410 epoxy adhesive is a low flow, two-part epoxy based structural adhesive. It is designed for use where
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationModuSec. Secure and efficient IT room solutions Composite Panel Systems Compared. Panel Systems are not all the same!
Secure and efficient IT room solutions Composite Panel Systems Compared Panel Systems are not all the same! When it comes to accommodating critical IT systems, the first issue to look at is the environment
More informationScotch-Weld TM. Epoxy Adhesive 1838 B/A Green 1838 B/A Tan 1838-L B/A Translucent. Technical Data February, 2016. Product Description
3 Scotch-Weld TM 1838 1838 1838-L Technical Data February, 2016 Description 3M TM Scotch-Weld TM s 1838 and are controlled flow products; Scotch-Weld 1838-L is flowable. These epoxy adhesives are two-part,
More informationTemperature C 10 15 23 40. Cure time to reach hours - - - - LSS > 1MPa minutes 20 12 8 2
Advanced Materials Araldite 2021 Structural Adhesives TECHNICAL DATA SHEET Araldite 2021 Two component toughened methacrylate adhesive system Key properties Rapid curing High peel strength Multi purpose
More informationOxidizer(s) Management and Use Guidelines
Facilities and Campus Services EHS/RMS 3101 Science Circle CPISB Room 102B Anchorage, AK 99508 Oxidizer(s) Management and Use Guidelines This document provides information concerning the handling, storage,
More informationGeneral Chemical Resistance of PET - Products
General Chemical Resistance of PET - Products The below data reflect the information available to the PET producers members of PlasticsEurope. They should not be construed as implying a legal guarantee
More informationBest Available Technology for Sodium Hypochlorite Storage Tanks
Best Available Technology for Sodium Hypochlorite Storage Tanks Michael G. Stevens, Senior Staff Scientist, Ashland Inc. Paul Cohen, Diamond Fiberglass ABSTRACT Sodium hypochlorite disinfection has become
More informationPRODUCT DATA SHEET PDS A115_E. Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262
reduced cable entry Metric thread M 1.5 pitch CEI EN 60423 CEI EN 50262 Ref. P Fixing A B C L Light Hole min-max Spanner min-max Quantity Grey (mm) (mm) (mm) (mm) (mm) 1900S.M16N M16x1,5 16,5 6-9,5 19
More information07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM
07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying
More informationDecomposition. Composition
Decomposition 1. Solid ammonium carbonate is heated. 2. Solid calcium carbonate is heated. 3. Solid calcium sulfite is heated in a vacuum. Composition 1. Barium oxide is added to distilled water. 2. Phosphorus
More informationHow To Safely Use An Ivm System
Material Safety Data Sheet Document no: MSDS-32 Product: MediCult IVM System Page 1 /3 Date first created: 06/12/18 Version 2 Date revised: 09/12/04 1. Identification of Substance/Preparation and of the
More informationMATERIAL SAFETY DATA SHEET
Material Safety Data Sheet:- DIHYDROGEN MONOXIDE Page No. 2 of 5. - - 1/7/2008. Date: January 7, 2008 Replaces MSDS Dated: MATERIAL SAFETY DATA SHEET Manufacturer(s) NFPA Designation 704 GENERIC (UBIQUITOUS)
More information09/07/07 GLASSFIBER REINFORCED CEMENT (GRC) C. S. I. Spec 03500 Master Spec. 03 49 00 Page 1
C. S. I. Spec 03500 Page 1 PART 1 - GENERAL 1.01 SUMMARY:.01 Provide special glassfiber reinforced cement (GRC) shapes in accordance with the requirements of the contract documents..02 The installing contractor
More informationWRITING CHEMICAL FORMULA
WRITING CHEMICAL FORMULA For ionic compounds, the chemical formula must be worked out. You will no longer have the list of ions in the exam (like at GCSE). Instead you must learn some and work out others.
More informationMATERIAL SAFETY DATA SHEET
Section I: IDENTIFICATION 1 OF 2 Date Prepared: 02/15/02 Date Revised*: 09/21/06 Product Name: Gram Stain, Lugol s Iodine Item Number: 400312, 400330, 400350, 400352, 400314, 400351, 400356, 400312B 400312A
More informationPRODUCT DATA SHEET DESCRIPTION:
DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.
More information1.5. UL flammability ratings. *Nylon 6.6 = Polyamide 6.6 is Halogen-free and Silicone-free.
1.5 UL flammability ratings WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 191 477 5371 TEL 0044 117 977 4647 FAX 0044 117 977 5582 WWW.THORNEANDDERRICK.CO.UK Flammability ratings
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationComposite Panel Firewall Systems
Composite Panel Firewall Systems part of the Protecting more than your business Insulated mineral fibre panels have excellent thermal and acoustic properties, ideal for factory and office partition walls.
More informationSECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. 129 Lockwood St. 1-800-255-3924-CHEM-TEL (24 hour)
Page 1 of 5 MATERIAL SAFETY DATA SHEET SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING LUBRIPLATE Lubricants Co. Emergency Telephone Number: 129 Lockwood St. 1-800-255-3924-CHEM-TEL
More informationPRODUCT DATA SHEET PDS A17_E
Multi-entry seal plugs Ref. A L Suitable Quantity for Box/Bag Seal (mm) (mm) TGM38 36A3M1623 3 8 5.000/100 TGM48 36A3M1624 + 36A3M2034 + 36A3M2554 4 8 5.000/100 TGM58 36A3M2025 5 8 5.000/100 TGM513 36A3M2545
More informationPRODUCT SAFETY DATA SHEET According to 91/155 EC 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING
G.W.B.PRODUCT LTD, 276 YORK WAY, LONDON N79PH TEL:020 7619 1650 FAX:020 7609 9196 EMAIL:gwb@btconnect.com www.gwbproducts.co.uk -1-1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY /
More informationEmergency Phone Numbers: P.O. Box 1950 CHEMTREC: 800/424-9300 Brewster, New York 10509-8950 POISON CENTER: 800/562-8236 845/279-0900
MATERIAL SAFETY DATA SHEET Pure Tech Emergency Phone Numbers: P.O. Box 1950 CHEMTREC: 800/424-9300 Brewster, New York 10509-8950 POISON CENTER: 800/562-8236 845/279-0900 Date of Last Revision: 10/16/96
More informationDIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported
DIN 2403 Identification of pipelines according to the fluid conveyed. Marking of pipes according to fluid transported 1 Field of application This standard specifies the colours for the identification of
More informationBlack epoxy paste adhesive system
Advanced Materials Araldite 2031 Structural Adhesives Araldite 2031 Black epoxy paste adhesive system Key properties Thixotropic non slumping Toughened adhesive, resilient bond Suitable for metal and composite
More informationAnodizing Reference Guide
Anodizing Reference Guide Type Thickness Type II Conventional coatings produced 1.8µ-25.4µ from sulfuric acid bath Type I A Conventional coatings produced 0.5µ-7.6µ (microns) from chromic acid bath Type
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationMass Transit, Marine, Off Shore and Construction Applications
An Update on Phenolic Resins for use in Mass Transit, Marine, Off Shore and Construction Applications Peter Willson Sales Director Caleb Technical Products Ltd 1/9 Introduction Fibre Reinforced Composites
More information80. Testing salts for anions and cations
Classic chemistry experiments 203 80. Testing salts for anions and cations Topic Qualitative analysis. Timing Description 12 hours. Students attempt to identify the anions and cations present in a salt
More information3 Single-Coated Foam Tapes
3 Single-Coated Foam Tapes Technical Data May, 2008 Product Description 3M Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel,
More informationMaterial Safety Data Sheet
Revision -1 on 10-02-07 Nylon-66 Thermoplastic Resin Material Safety Data Sheet CHEMICAL PRODUCT/ COMPANY NAME Product Identifier: Polyamide 66 commonly known as Nylon 66 or PA66 Product Description: Nylon
More informationData Sheet VITOSOL 100. Flat collectors for the utilisation of solar energy. Vitosol 100. Part nos. and prices: see price list
VITOSOL 100 Flat collectors for the utilisation of solar energy Data Sheet Part nos. and prices: see price list File in: Vitotec 1 Manual, Index 16 Vitosol 100 Type s 1.7 Vitosol 100 Type s 2.5 Vitosol
More informationCOMPOSITION / INFORMATION ON INGREDIENTS
MATERIAL SAFETY DATA SHEET DAMTITE WATERPROOFER- WHITE 01071, 01211, 01451 DAMTITE POWDER FOUNDATION WATERPROOFER GRAY 02451 SECTION I. COMPANY & PRODUCT INFORMATION Product Identification Manufacturer
More informationBEST PRACTICE GUIDE. Fibrelime Premixed Universal Plaster and Render
BEST PRACTICE GUIDE Fibrelime Premixed Universal Plaster and Render Contents: Fibrelime description Fibrelime suitability Preparation before application Application Aftercare Painting General Recommended
More information1. Chemical Product and Company Identification
LG ICR18650S2 Lithium Ion Rechargeable Battery For HP HSTNN-LB09, LTD 1 Chemical Product and Company Identification Product Identification LG ICR18650S2 Lithium-Ion Rechargeable Battery for HP HSTNN-LB09
More informationDENSO WATERPROOFING SYSTEMS
DENSO WATERPROOFING SYSTEMS Approved Quality Management System AS/NZS ISO 9001:2008 Lloyds Register Certificate N o Mel 0927759 Denso (Australia) Pty Ltd A MEMBER OF WINN & COALES INTERNATIONAL 411 413
More informationProduct Code: VLB4236 310ml cartridges. Substance Name EC No. CAS No. % by Wt Hazard Symbols n Butylacetate 123 86 4 10 30 10.
1 Product and company identification Supplier: The Vapormatic Co Ltd PO Box 58, Kestrel Way Sowton Industrial Estate, Exeter, EX2 7NB, England Phone Number: 00 44 (0)1392 435461 Fax Number: 00 44 (0)1392
More informationFor dead-end terminations. E981DFN 1/2 19 15 E981EFN 3/4 19 15 E981FFN 1 19 18 E981FFN-CAR 1 19 10
Single Gang FS Boxes Type FSE Rigid Nonmetallic Conduit Switch Boxes For dead-end terminations. Type FSS For multiple dead-end circuit terminations or where additional support is required in stub-up applications.
More informationMILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS
MILMAN & ASSOCIATES STRUCTURAL CONSULTING ENGINEERS/ PROJECT MANAGERS May 29, 2013 Revision B Structural Guideline for Design and Installation Holes in Composite Floor Slab Terminal 3, Departure Level
More informationTechnical Reference Bulletin Elastomer Compatibility Chart
ASTM D-2000 Classification Trade Names 1-Compatible 2-Minor Incompatibility 3-Severe Incompatibility 4-Not Recommended 0-Insufficient Data To Determine Compatibility Chemical Acetone Acetylene Aluminum
More informationChemical-Resistant Epoxies for Secondary Containment by Christine Stanley Ameron Inc., Protective Coatings Group
Chemical-Resistant Epoxies for Secondary Containment by Christine Stanley Ameron Inc., Protective Coatings Group The coating of secondary containment areas is becoming more common as government regulation
More informationStandard Operating Procedure for a Chemical Spill
Standard Operating Procedure for a Chemical Spill Facility: Lab Director: Scope: ERC Clean Room C17 Engineering Research Complex Electrical and Computer Engineering Brian Wright 3234 Engineering 355-5233
More informationHazard Warning Signage Guidelines
Fire Department 401 Oak Street, #402 Roseville, California 95678-2649 Hazard Warning Signage Guidelines Where hazardous materials are stored in quantities that require a permit pursuant to CFC Table 105.6.20,
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1 : PRODUCT AND COMPANY IDENTIFICATION 1.1.Product Details Product Name: Ferrofluid Name: APG 2100 series Chemical Name: Proprietary product Chemical Formula: Mixture
More informationEnclosures 1-866-338-0988. DuraSystems Barriers, Inc. www.durasystems.com Email: sales@durasystems.com. The Passive Fire Protection Specialists
Enclosures Sturdy single and double wall fire protection construction Impact resistant Fast & easy installation Pre-manufactured and modular Available in galvanized, stainless steel & other specialty metals
More informationTeacher Demo: Turning Water into Wine into Milk into Beer
SNC2D/2P Chemical Reactions/Chemical Reactions and their Practical Applications Teacher Demo: Turning Water into Wine into Milk into Beer Topics evidence of chemical change types of chemical reactions
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
(HU-650) 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product name : HU-650 ABS Polymers Generic name : ABS Graft Copolymer Chemical product name : Acrylonitrile Butadiene
More informationTechnical Data Sheet
Februar, 2014 Technical Data Sheet PLA Polylactide Cas No. 9051-89-2 PLA is a thermoplastic resin derived from annually renewable resources Product Characteristics Typical Properties Value Unit Physical
More informationHazardous Chemical Reactions in Art
Hazardous Chemical Reactions in Art By Michael McCann, PhD, CIH Many art materials are inherently hazardous, including toxic solvents and many metals, corrosive and alkalis, flammable solvents and combustible
More informationBLACK JACK ALL WEATHER ROOF COATING
PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.
More informationCalculating Molar Mass of a Compound
Instructions for Conversion Problems For every conversion problem Write the number in the problem down with unit and a multiplication sign Decide which conversion factor you should use, Avagadro s or molar
More informationInsulated Roof & Wall Panels. Product Data Sheet. Trapezoidal Insulated Roof Panels KS1000 RW
Insulated Roof & Wall Panels Trapezoidal Insulated Roof Panels KS1000 RW Overview Kingspan roof panel systems present a superior system compared to conventional multi-part site assembled systems. They
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
More informationMATERIAL SAFETY DATA SHEET SECTION 1 CHEMICAL PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS
SECTION 1 CHEMICAL PRODUCT AND COMPANY INFORMATION Chemical Name: Stainless Steel Product Use: Manufacturer Information: OMNISOURCE CORPORATION Telephone: (260)422-5541 Safety Department 1610 North Calhoun
More informationSECTION 1 IDENTIFICATION
Metabo Corporation Hazard Communication May, 2015 SAFETY DATA SHEET SECTION 1 IDENTIFICATION Product Identifier: Reinforced Resin Bonded Abrasive Products Manufacturer Name: Metabo Corporation Address
More information- - - - Steel Panel Frame. Exterior Steel Sheeting. Optional Rigid Insulation. Optional Steel Insulation Liner
The Kelly Klosure pre-framed modular panel has 4 components that are factory finished to create an easy and versatile bolt-together system in the field. Steel Panel Frame Exterior Steel Sheeting Optional
More informationComposite Design Fundamentals. David Richardson
Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure
More informationWaste Management Log Book
Waste Management Log Book Web address: www.ehs.psu.edu Designated Accumulation Area: Building & Room Number Location in Room Supervisor: E-mail Individual Assigned to Oversight: E-mail Form 1 Chemical
More information3.2 The Department of Environmental Health and Safety is responsible for;
1 Introduction The have been developed in order to minimize the risk of accidental chemical reactions and exposure resulting from the improper storage of hazardous chemicals. The chemical storage procedures
More informationProfiles for floors of same height Cerfix Projoint
PROFILPAS S.P.A. VIA EINSTEIN, 38 35010 CADONEGHE (PADOVA) ITALY TEL. +39 (0)49 8878411 +39 (0)49 8878412 FAX. +39 (0)49-706692 EMAIL: INFO@PROFILPAS.COM s for floors of same height Cerfix Projoint Application
More informationMATERIAL SAFETY DATA SHEET High Pressure Laminate Fire Retardant
SECTION I - PRODUCT INFORMATION PRODUCT NAME: Nevamar High Pressure Decorative Laminate -- NEMA Grades SGF, HGF, VGF and SP125 FR Laminate CHEMICAL NAME: Laminated Plastic CHEMICAL FAMILY: Plastic Composite
More informationSAFETY DATA SHEET Loctite Corporation 603
Loctite Corporation 63 12665 4. IE EA 31.5.2 MSDS_IE This safety data sheet has been prepared in accordance with the requirements of EC Directive 88/379/EEC and 91/155/EEC (and other related directives)
More informationPEROXIDE SAFETY DATA SHEET (60% H2O2) Safety Data Sheet
SAYFA : 1/6 1. Identification of the substance Identification of the product Product name : Hydrogen peroxide solution 60% Manufacturer / supplier identification Company : A.Ş. 600Evler Mahallesi Atatürk
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MANUFACTURER PIGMENT SANAYI A.Ş. ADDRESS and PHONE NUMBERS Kemalpaşa Asfaltı No:44 Kemalpaşa Izmir/TURKEY IN CASE OF EMERGENCY
More informationSmartPly OSB3 SMARTPLY
SMARTPLY SmartPly OSB3 SmartPly OSB3 is a highly engineered, moisture resistant load-bearing panel designed for use in humid conditions and is therefore ideal for many structural and non-structural applications
More informationMATERIAL SAFETY DATA SHEET WWF -20 1 of 5 1 Gal Xtreme Blue -20 Windshield Washer Fluid. 121 Landmark Drive Greensboro, NC 27409
WWF -20 1 of 5 = SECTION I - COMPOSITION / INFORMATION ON MATERIALS = VAPOR PRESSURE WEIGHT REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT -------------------------------------------------------------------------------------------
More informationEXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS
EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use
More information