COPRAR EDIFACT User Guide Page 2

Transcription

1 PR04049-STEIN_MN12 Version: 1.0 Date: 30/09/2006

2 ! COPRAR EDIFACT User Guide Page 2

3 1 // INTRODUCTION // PURPOSE // CONTENTS // REFERENCE DOCUMENTS // SHORTHANDS // MESSAGING // APERAK SEGMENT TABLE // SEGMENT UNB // SEGMENT UNH // SEGMENT BGM // SEGMENT DTM // SEGMENT FTX // SEGMENT RFF // SEGMENT NAD // SEGMENT CTA // SEGMENT COM // SEGMENT ERC // SEGMENT FTX // SEGMENT RFF // SEGMENT FTX // SEGMENT UNT // SAMPLES COPRAR EDIFACT User Guide Page 3

4 1.1 // Purpose This user manual is a subset of the implementation guide of the UN/EDIFACT APERAK message version D00B published by the Joint Transport Group (JM4). The function of this message is: a) to acknowledge or reject to a message issuer the receipt of his message by valenciaportpcs.net b) Marítima Valencia will reply to the COPRAR message with an Aperak message, accepting or rejecting it. 1.2 // Contents This documents consists of: Chapter 1 Introduction. Chapter 2 Messaging between actors. Chapter 3 APERAK message structure Chapter 4 Samples. 1.3 // Reference documents [1] United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/EDIFACT [2] UNTDID, Part 4, Chapter 2.3 UN/ECE UNSM APERAK Version D Release 00B General Introduction, Section 1. [3] APERAK user manual PR06049-STEIN_MN09 Guía Usuario Mensaje APERAK 1.4 // Shorthands APV Autoridad Portuaria de Valencia ED Data Element ISO International Organization for Standardization O Optional M Mandatory SMDG User Group for Shipping Lines and Container Terminals UN/EDIFACT United Nations Directories for Electronic Data Interchange for Administration, Commerce and Transport UN/LOCODE United Nations Code for Trade and Transport Locations COPRAR EDIFACT User Guide Page 4

5 (**) If CB is not working with Valenciaportpcs.net, the COPRAR sent by CM is forwarded directly to the Stevedoring Company CONTRL(ResponseMessage) will be always sent by valenciaportpcs.net in response to some received message, acknowledging o rejecting it. The APERAK sent by Marítima Valenciana to Valenciaportpcs.net will be forwarded to the maritime agent who demands it. CONTRL(ResponseMessage) will be always sent by valenciaportpcs.net in response to some received message, acknowledging o rejecting it. The APERAK sent by Marítima Valenciana to Valenciaportpcs.net will be forwarded to the maritime agent who demands it (*) COARRI will be always sent to the CB, even if the original COPRAR is not registered in Valenciaportpcs.net. (**) CM will only receive his containers COPRAR EDIFACT User Guide Page 5

6 !"#$ Pos. Seg. Req. Group Notes and No. ID Name Des. Max.Use Repeat Comments 0005 UNB Interchange Header C UNH Message Header M BGM Beginning of Message M DTM Date Time Period C FTX Free Text C Segment Group 1: RFF C RFF Reference M Segment Group 2: NAD-CTA-COM C NAD Segment error indication M CTA Contact information C COM Communication contact C Segment Group 3: ERC-FTX-SG4 C ERC Application error information M 1 FTX Free Text 0120 Segment Group 4: RFF-FTX C RFF Reference M FTX Free Text C UNT Message Trailer M UNZ Interchange Trailer C 1 COPRAR EDIFACT User Guide Page 6

7 %!"&' &' Segment: UNB Interchange Header Position: 0005 Group: Level: 0 Usage: Mandatory Max Use: 1 Purpose: Identify an interchange UNB+UNOA:2+VALENCIAPORT+TTTT : ' M S001 SYNTAX IDENTIFIER M 1 M 0001 Syntax identifier M an..6 UNOA indicating the use of level 'A' character set. M 0002 Syntax version number M n1 2 indicating the use of level 'A' character set. M S002 SENDER IDENTIFICATION M 1 M 0004 Sender identification M an..35 Name code of the message sender: Mailbox assigned by Valenciaportpcs.net to the sender VALENCIAPORT X 0007 Code list identification code C an..4 X 0008 Return address C an..14 M S003 RECIPIENT IDENTIFICATION C 1 M 0010 Recipient identification M an..35 Name code of the message recipient: Mailbox assigned by Valenciaportpcs.net to the recipient TTTT X 0007 Code list identification code C an..4 X 0014 Address C an..14 M S004 DATE/TIME OF PREPARATION M 1 M 0017 Date of preparation M n6 Preparation date of the message (format Y Y Y Y MM DD) M 0019 Time of preparation M n4 Preparation date of the message (format HHMM ) M 0020 INTERCHANGE CONTROL REFERENCE M an..14 A reference allocated by the sender, uniquely identifying the interchange. This reference must also be transmitted in the UNZ segment. X S005 RECIPIENT REFERENCE C 1 X 0022 Recipient reference C an..14 X 0025 Code list recipient reference C an..2 X 0026 APPLICATION REFERENCE C an..14 X 0029 PROCESS PRIORITY CODE C an..1 X 0031 RESPONSE TYPE CODE C n1 X 0032 COMMUNICATION IDENTIFIER C an..35 X 0035 TRIAL IDENTIFIER C n1 COPRAR EDIFACT User Guide Page 7

8 (!"&) &) Segment: UNH Message Header Position: 0010 Group: Level: 0 Usage: Mandatory Max Use: 1 Purpose: A service segment starting and uniquely identifying a message. The message type code for the Container discharge/loading order message is APERAK. Note: Container discharge/loading order messages conforming to this document must contain the following data in segment UNH, composite S009: Data element 0065 APERAK 0052 D B 0051 UN The 0057 element indicates if the Aperak is sended by VP or by the stevedoring company UNH+ VPPP APERAK:D:00B:UN:VPRCLO M 0062 MESSAGE REFERENCE NUMBER M 1 an..14 Unique message reference assigned by the sender. This reference must also be transmitted in the UNT segment. For the purposes of a proper handling of this message by the valenciaportpcs.net platform the message reference number shall follow the following structure: VVVVACCCCCCCCC Where: VVVV (an4) is the identification code of the sender party assigned by valenciaportpcs.net A: String 1, Último dígito del año en curso en el que se emite el documento. CCCCCCCCC (an9) is a unique reference assigned by the sender party to the message. M S009 MESSAGE IDENTIFIER M 1 M 0065 Message type identifier M an..6 APERAK Container discharge/loading order message M 0052 Message type version number M an..3 D Draft version/un/edifact Directory M 0054 Message type release number M an..3 00B Release 2000 B M 0051 Controlling agency M an..2 UN UN/CEFACT R 0057 Association assigned code C an..6 VPRCLO Aperak sended by the container terminal to the agent in response to the COPRAR message CONTRL Aperak sended by Valenciaportpcs.net to the agent in response to some received message O 0068 COMMON ACCESS REFERENCE C 1 an..35 Additional message reference (if required) X S010 STATUS OF THE TRANSFER C 1 COPRAR EDIFACT User Guide Page 8

9 X 0070 Sequence message transfer number M n..2 X 0073 First/last sequence message transfer indication C a1 COPRAR EDIFACT User Guide Page 9

10 *!"' Segment: BGM Beginning of Message Position: 0020 Group: Level: 0 Usage: Mandatory Max Use: 1 Purpose: A segment to indicate the type and function of the message and to transmit the identifying number.. Although element 4343 (Response Type Code) is optional, valenciaportpcs.net will always send this element requesting the reception of a message acknowledgement. Possible values are: Document acknowledgment response: 962 in 1001 data element and 29 in 1225 data element. Error response: 963 in 1001 data element and 27 in 1225 data element. If element 1004 has not be included by the sender, it will be automatically assigned by the system with the following structure: UUUUANNNNNNNNN UUUU: InterchangeHeader\InterchangeSender\SenderIdentification A: Year (Now) NNNNNNNNN : sequential number assigned by the system BGM VTTT ' R C002 DOCUMENT/MESSAGE NAME C 1 R 1001 Document name code C an Document acknowledgment response 963 Error response X 1131 Code list identification code C an..17 X 3055 Code list responsible agency code C an..3 X 1000 Document name C an..35 R C106 DOCUMENT/MESSAGE IDENTIFICATION C 1 R 1004 Document identifier C an..35 Sender's unique reference number for the document. X 1056 Version identifier C an..9 X 1060 Revision identifier C an..6 R 1225 MESSAGE FUNCTION CODE C 1 an Accepted 27 Rejected X 4343 RESPONSE TYPE CODE C 1 an..3 COPRAR EDIFACT User Guide Page 10

11 +!" Segment: DTM Date/Time/Period Position: 0030 Group: Level: 1 Usage: Conditional (Required) Max Use: 9 Purpose: A segment to indicate a date and/or time applying to the whole message, such as date and time of document or message issue. Only one occurrence of this segment is used. The document/message send date is mandatory. DTM +137: :203' M C507 DATE/TIME/PERIOD M 1 M 2005 Date or time or period function code qualifier M an Document/message date/time R 2380 Date or time or period value C an..35 Date/time that the message was prepared. R 2379 Date or time or period format code C an CCYYMMDDHHMM COPRAR EDIFACT User Guide Page 11

12 ,!" - Segment: FTX Free Text Position: 0040 Group: Segment Group 6 (Equipment Details) Mandatory Level: 2 Usage: Conditional (Optional) This segment is not used in the transaction Max Use: 9 Purpose: A segment to specify free form or processable supplementary information related to the whole message FTX+DCL++ZAE' M 4451 TEXT SUBJECT CODE QUALIFIER M 1 an..3 X 4453 FREE TEXT FUNCTION CODE C 1 an..3 D C107 TEXT REFERENCE C 1 M 4441 Free text value code M an..17 O 1131 Code list identification code C an..17 O 3055 Code list responsible agency code C an..3 D C108 TEXT LITERAL C 1 M 4440 Free text value M an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 X 3453 LANGUAGE NAME CODE C 1 an..3 X 4447 FREE TEXT FORMAT CODE C 1 an..3 COPRAR EDIFACT User Guide Page 12

13 .!" Segment: RFF Reference Position: 0060 Group: Segment Group 1 (Reference) Mandatory (Required) Level: 3 Usage: Mandatory (Required) Max Use: 9 Purpose: A segment to provide the reference number to the previous message. The ACW value is required. The rest are optional. RFF+ACW : ' M C506 REFERENCE M 1 M 1153 Reference code qualifier M an..3 ACW Reference number to previous message Document identifier (ed 1004, BGM) to previous message AGO Message Reference Number to previous message Message Reference Number (ed 0062, UNH) to previous message R 1154 Reference identifier C an..70 X 1156 Document line identifier C an..6 X 4000 Reference version identifier C an..35 X 1060 Revision identifier C an..6 COPRAR EDIFACT User Guide Page 13

14 /!"& Segment: NAD Name and Address Position: 0080 Group: Segment Group 2 (Name And Address) Conditional Level: 2 Usage: Conditional (Required) Max Use: 9 Purpose: A segment to specify a related address or party, such as: - document sender This segment shall be used to indicate the sender to the document: For Aperak sended by the container terminal in response to the COPRAR message TR is used. For Aperak sended by valenciaportpcs.net in response to some received message, VP is used NAD+TR+ X NOMBRE ESTIBADORA ' Data Element Component Element Name M 3035 PARTY FUNCTION CODE QUALIFIER M 1 an..3 TR Container Terminal VP valenciaportpcs.net O C082 PARTY IDENTIFICATION DETAILS C 1 M 3039 Party identifier M an..35 Company code Codes agreed among valenciaportpcs.net system will be used. Container terminal code VALENCIAPORT O 1131 Code list identification code C an Party identification 172 Carriers O 3055 Code list responsible agency code C an..3 O C058 NAME AND ADDRESS C 1 M 3124 Name and address description M an..35 O 3124 Name and address description C an..35 O 3124 Name and address description C an..35 O 3124 Name and address description C an..35 O 3124 Name and address description C an..35 X C080 PARTY NAME C 1 X 3036 Party name M an..35 X 3036 Party name C an..35 X 3036 Party name C an..35 X 3036 Party name C an..35 X 3036 Party name C an..35 X 3045 Party name format code C an..3 X C059 STREET C 1 X 3042 Street and number or post office box identifier M an..35 X 3042 Street and number or post office box identifier C an..35 COPRAR EDIFACT User Guide Page 14

15 X 3042 Street and number or post office box identifier C an..35 X 3042 Street and number or post office box identifier C an..35 X 3164 CITY NAME C 1 an..35 X C819 COUNTRY SUB-ENTITY DETAILS C 1 X 3229 Country sub-entity name code C an..9 X 1131 Code list identification code C an..17 X 3055 Code list responsible agency code C an..3 X 3228 Country sub-entity name C an..35 X 3251 POSTAL IDENTIFICATION CODE C 1 an..17 X 3207 COUNTRY NAME CODE C 1 an..3 COPRAR EDIFACT User Guide Page 15

16 !" Segment: CTA Contact Information Position: 0090 (Trigger Segment) Group: Segment Group 5 (Contact Information) Conditional (Optional) Level: 2 Usage: Mandatory This segment is not used in the transaction. Max Use: 1 Purpose: A segment to identify a person or department of a message sender and/or message recipient, such as: - information contact CTA+IC+:CARGO CONTROL' R 3139 CONTACT FUNCTION CODE C 1 an..3 IC Information contact R C056 DEPARTMENT OR EMPLOYEE DETAILS C 1 X 3413 Department or employee name code C an..17 R 3412 Department or employee name C an..35 Contact name COPRAR EDIFACT User Guide Page 16

17 !"0 Segment: COM Communication Contact Position: 0100 Group: Segment Group 5 (Contact Information) Conditional (Optional) Level: 3 Usage: Conditional (Optional) This segment is not used in the transaction. Max Use: 9 Purpose: A segment to identify a communication number of a person or department to whom communication should be directed. COM :TE' M C076 COMMUNICATION CONTACT M 3 M 3148 Communication address identifier M an..512 Contact number. M 3155 Communication address code qualifier M an..3 EM Electronic mail FX Telefax TE Telephone TL Telex XF X.400 address COPRAR EDIFACT User Guide Page 17

18 !" Segment: ERC Application Error Information Position: 0110 Group: Segment Group 3 (Error Information) Optional Level: 3 Usage: Mandatory. Max Use: 999 Purpose: To identify the type of application error within a message. Autonumeric for CONTRL ERC+456 M C901 APPLICATION ERROR INFORMATION M 1 M 9321 Application error code M an..8 Code specifying an application error X 1131 Code list identification code C an..17 X 3055 Code list responsible agency code C an..3 COPRAR EDIFACT User Guide Page 18

19 %!" - Segment: FTX Free Text Position: 0120 Group: Segment Group 3 (Error Information) Optional Level: 2 Usage: Conditional (Optional) Max Use: 1 Purpose: A segment to provide explanation and/or supplementary information related to the specified application error or acknowledgement. For example, the explanation may provide exact details relating to a generic error code. FTX+AAO+++Error Description M 4451 TEXT SUBJECT CODE QUALIFIER M 1 an..3 AAO Error description (free text) X 4453 FREE TEXT FUNCTION CODE C 1 an..3 D C107 TEXT REFERENCE C 1 M 4441 Free text value code M an..17 O 1131 Code list identification code C an Special handling If e4451 = INV ZZZ Mutually defined If e4451 = ACF, DAR or ABS O 3055 Code list responsible agency code C an..3 5 ISO (International Organization for Standardization) If e4451 = ACF 184 AU, ACOS (Australian Chamber of Shipping) If e4451 = INV, DAR or ABS D C108 TEXT LITERAL C 1 M 4440 Free text value M an..512 Free text O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 X 3453 LANGUAGE NAME CODE C 1 an..3 X 4447 FREE TEXT FORMAT CODE C 1 an..3 COPRAR EDIFACT User Guide Page 19

20 (!" Segment: RFF Reference Position: 0130 Group: Segment Group 4 (Reference) Optional Level: 3 Usage: Mandatory (Required). Max Use: 1 Purpose: A segment to provide a reference relating to the acknowledgement type or the specified error (e.g. functional entity reference such as equipment level). It is not used RFF+ZAC' M C506 REFERENCE M 1 M 1153 Reference code qualifier M an..3 ZEN List level ZAC Container level R 1154 Reference identifier C an..70 X 1156 Document line identifier C an..6 X 4000 Reference version identifier C an..35 X 1060 Revision identifier C an..6 COPRAR EDIFACT User Guide Page 20

21 *!" - Segment: FTX Free Text Position: 0140 Group: Segment Group 4 (Reference) Optional Level: 3 Usage: Conditional (Optional) Max Use: 1 Purpose: To provide free form or coded text information about errors. FTX+AAO+++Error Description M 4451 TEXT SUBJECT CODE QUALIFIER M 1 an..3 AAO Error description (free text) X 4453 FREE TEXT FUNCTION CODE C 1 an..3 D C107 TEXT REFERENCE C 1 M 4441 Free text value code M an..17 O 1131 Code list identification code C an Special handling If e4451 = INV ZZZ Mutually defined If e4451 = ACF, DAR or ABS O 3055 Code list responsible agency code C an..3 5 ISO (International Organization for Standardization) If e4451 = ACF 184 AU, ACOS (Australian Chamber of Shipping) If e4451 = INV, DAR or ABS D C108 TEXT LITERAL C 1 M 4440 Free text value M an..512 Free text O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 O 4440 Free text value C an..512 X 3453 LANGUAGE NAME CODE C 1 an..3 X 4447 FREE TEXT FORMAT CODE C 1 an..3 COPRAR EDIFACT User Guide Page 21

22 +!"& Segment: UNT Message Trailer Position: 0150 Group: Level: 0 Usage: Mandatory Max Use: 1 Purpose: A service segment ending a message, giving the total number of segments in the message (including the UNH & UNT) and the control reference number of the message. UNT+32+ VPPP ' M 0074 NUMBER OF SEGMENTS IN A MESSAGE M 1 n..6 Total number of segments in the message M 0062 MESSAGE REFERENCE NUMBER M 1 an..14 M essage reference identical to e0062 in UNH segment COPRAR EDIFACT User Guide Page 22

23 ,!"1$ UNB+UNOA:2+MARVAL+A : ' UNH APERAK:D:04A:UN:VPRCLO' BGM ' DTM+137: :203' RFF+AAY:A ' RFF+ACW:VPDE2006I001006' NAD+TR+A :167:148++MARITIMA VALENCIANA S.A.' UNT ' UNZ ' UNB+UNOA:2+VALENCIAPORT+MVAL+60913: UNH+VPRT APERAK:D:00B:UN:CONTRL BGM+963+VPRT DTM+137: :203 RFF+ACW: RFF+AGO: NAD+VP+VALENCIAPORT ERC+1 FTX+AAO+++El documento identificado no existe UNT+9+VPRT UNZ COPRAR EDIFACT User Guide Page 23

24 Centro de Atención a Usuarios Tel.: / cau@valenciaportpcs.net