KD-VA5. Operating Instructions. KD-VA5 Operating Instructions. RGBHV-to-Component Video or Component-to-RGBHV Video Adapter

Transcription

1 KD-V5 -to- Video or -to- Video dapter Operating Instructions Key Digital, led by digital video pier Mike Tsinberg, develops and manufactures high quality, cutting-edge technology solutions for virtually all applications where high quality video imaging is iorta. Key Digital The KD-V5 by Key Digital is a universal analog Video dapter that converts Video sources to Video (YPbPr) out, or it can be configured to convert Video (YPbPr) sources to out. It is coact and sile to operate using three slide switches, with clearly labeled status LEDs located on the top of the unit. The KD-V5 supports various sync modes, like SCRT, sync on Green, and separate coosite sync. Iellige uto Sensing let s the unit run itself. nvenie pass-through connectors allow you to maiain connections to your existing PC monitor or co video displays. Performs no video processing and supports all popular analog video formats like HDTV, NTSC, and PL. Mouing clip & external power supply provided. is at the forefro of the video industry for Home Theater Retailers, Custom Installers, System Iegrators, roadcasters, Manufacturers, and nsumers. We provide total video system solutions because we know and help drive the technology, the industry, the business, and all the latest up-and-coming standards. ut most of all, we know exactly what you need for your unique Key Digital Exclusive Technologies Key Digital Exclusive Technologies application - the right solution. 521 East 3rd Street, Mou Vernon, NY Ph :: Fax :: Web :: KD-V5_Manual.indd 2-3 Rev 0 ugust /2/06 11:55:46 M

2 Page Table of es Iroduction What s Included Useful Tips Installation pplication Exales nnecting the KD-V5 io your system nfiguration and Operation Technical Specifications How to act Key Digital Iroduction Page Thank you for purchasing the KD-V5 by Key Digital, a state-of-the-art universal analog Video dapter. The KD-V5 is the flexible solution you ve been looking for to mix and match and Video (YPbPr) sources and displays. It also has many well-thought-out features, including: llows you to connect sources, such as from your PC, to Video (YPbPr) displays: Pass-through lets you simultaneously maiain connection to your PC monitor llows you to connect Video (YPbPr) sources, such as from your Cable ox or DVD player, to displays: Pass-through lets you simultaneously maiain connection to your HDTV Video display Supports most analog ierlaced and progressive video formats, at 60 Hz or 50 Hz, such as HDTV, NTSC, and PL: 1080i (60 & 50 Hz) 720p (60 & 50 Hz) 480p (60 Hz) 576p (50 Hz) 576i (50 Hz, SCRT only) Uses RC and HD-15 VG female connectors, and supports cable runs up to 50 feet Sile to operate with three configuration slide switches, and clearly labeled silk-screened instructions and LEDs for status indication on the top cover Iellige uto Sensing automatically switches from -to- Video or -to- Video by sensing active sync on the Y Video signal Supports sync on Y, separate H&V sync, as well as a variety of alternate sync formats, including: Sync on green, coosite sync, or SCRT Performs no video processing other than -to- Video or -to- Video conversions, ensuring perfect image quality from input to output 2006 Key Digital, Inc. ll rights reserved. KD-V5_Manual.indd 4-1 8/2/06 11:55:48 M

3 What s Included Useful Tips The following coes are provided with your purchase: 1. One KD-V5 unit 2. Separate external 5-Volt power supply 3. Mouing clip 4. Operating Manual 5. Warray card It is suggested that you read and follow this eire Operating Manual. Some useful tips to keep in mind when installing and using the KD-V5: 1. lways test the full operation of your unit before final installation of cables behind walls or ceilings. 2. Use ONLY the 5V, 1 Power Supply provided with your unit. 3. Video means YPbPr with Sync usually provided on the Y channel. 4. KD-V5 Iellige uto Sensing looks for active sync on the Y Video source input, so if you are in the -to- Video mode and wa to view the source you must ensure there is no active sync on the Y channel. 5. You must set the three slide switches to correspond to the desired Sync settings. Follow the instructions on the silkscreen cover of the unit, or read the details provided in this Operating Manual. 6. Limit cable lengths to 50 each, using high-quality cables of equal cable length. 7. The KD-V5 supports only the following popular analog SD and HD video formats: 1080i (60 & 50 Hz), 720p (60 & 50 Hz) 480p (60 Hz) 576p (50 Hz) 576i (50 Hz, SCRT only) 8. Take advaage of the pass-through feature to simultaneously connect and Video sources and displays. 9. Verify iended operation/configuration by observing the LEDs on the top of the unit and the corresponding silkscreen explanations. 10. This video adapter is NOT a video processor or video scaler, so other than format conversions between and (YPbPr) Video, there is no further video processing performed in the unit. 11. This video adapter does not support audio. You must handle your audio connections and needs separately. 12. Other than Iellige uto Sensing feature, the KD-V5 does not provide switching or distribution capabilities. Only use each output to drive video display, and do not daisy chain the video inputs to any other product. KD-V5_Manual.indd 2-3 8/2/06 11:55:51 M

4 Installation pplication Exales The first step to enjoying the KD-V5 is to install the unit io your system. Determine which of the following modes of operation are needed for your analog video and sync: nalog Video Modes -to- (YPbPr) Video conversion lso supports SCRT Video input -to- Video conversion Sync Modes Video with sync on Y Video with separate H & V sync dditional sync modes supported: Video with sync on green SCRT input ( Video plus osite Sync on H input) osite sync on H output Pass-through The KD-V5 also has a convenie pass-through feature that allows you to maiain connections to your existing displays: -to- (YPbPr) Video conversion drives your Video HD display, while the pass-through coinues to drive your display -to- Video conversion drives your display, while the Video pass-through coinues to drive your Video HD display Take advaage of this handy feature so that you can have your system configured and ready to operate with any combination of and Video sources and displays. Iellige uto Sensing Iellige uto Sensing automatically switches from -to- Video or -to- Video by sensing active sync on the Y Video signal. You must understand this feature for proper output selection and pass-through operation of your unit. Switching and Distribution Other than Iellige uto Sensing feature, the KD-V5 does not provide switching or distribution capabilities. Only use each output to drive video display, and do not daisy chain the video inputs to any other product or products. Refer to the following pplication Exales for typical installations with the KD-V5. /VG to Mode uter - s Pas gh rou -th uter ass VP H to /VG Mode pon m e uter Pa e pon ugh thro ss- m p m / V G uter KD -CS W2 x1 o h g rou th sst Pa nen Cable ox This will display the uter output DVD Player ONLY if the Video H source is inactive. V/ V G KD -CS W2 x1 KD-V5_Manual.indd 4-5 ugh thro Cable ox DVD Player This will display the uter output ONLY if the Video source is inactive. 8/2/06 11:55:57 M

5 Page nnecting the KD-V5 io your system CUTION: lways test the full operation of your unit before running cables behind walls or ceilings! Find a safe and convenie location to place your KD-V5 unit. You will need to connect the separate power supply to the unit later. fter you have made all wiring connections per the instructions below, you may also wa to use the mouing clip provided with your unit. Using high-quality video cables, such as those available from Key Digital, connect your video source to the appropriate input of the KD-V5. Use high-quality cables of equal cable length. Page SCRT ( Video plus osite Sync on H) is also supported on the Input connector. Obtain the appropriate SCRT adapter to ierface to the KD-V5 HD-15 VG input connector. Using high-quality video cables, such as those available from Key Digital, connect your display(s) to the appropriate output(s) of the KD-V5. For most applications, sync for Video will be separate H & V carried over the HD-15 VG cable, and sync for Video (YPbPr) will be carried over the Y channel. The KD-V5 also supports the following sync options, so be sure sync is provided accordingly for your particular application: Video with sync on green (s) SCRT input ( plus osite Sync on H input) osite sync on H output For Video inputs, use HD-15 VG cables and connect to the female input connector marked Input on the unit For Video (YPbPr) inputs, use video cables with RC jacks and connect to the colorcoded female input connector marked Pb Y Pr on the unit Note: Limit cable runs to 50 feet. Note: Do not daisy chain the video connections to another input, since the KD-V5 has built-in 75 Ω video terminations For Video (YPbPr) inputs, use video cables with RC jacks and connect to the colorcoded female input connector marked Pb Y Pr on the unit For Video inputs, use HD-15 VG cables and connect to the female input connector marked Input on the unit KD-V5_Manual.indd 6-7 8/2/06 11:56:05 M

6 Using only the 5 Volt, 1 Power Supply provided with your unit, connect the power supply jack to the KD-V5 jack located near the Output, and plug the power supply cord io an appropriately rated power source. 5 Volt, 1 Power Supply connected to the KD-V5 Carefully insert the power supply jack io the KD-V5 nfiguration and Operation Now that the KD-V5 is wired io your system, the three slide switches on the side of the unit near the Pb Y Pr Input must be set for the desired mode of sync operation. The LEDs on the top of the unit verify the desired operation of the unit. For most applications, the Slide Switches will be in the UP (default) position, and the Green LEDs will be ON. Red LEDs indicate: -to-ypbpr or YPbPr-to- nversion Yellow LEDs indicate when the corresponding Slide Switch is in the DOWN position Green LEDs indicate when the corresponding Slide Switch is in the UP (default) position Slide Switch 3 corols these two functions mouing clip (bracket) is provided to allow you to secure your KD-V5 to a wall, rack, etc. It is suggested that you fully operate the unit first (see the following nfiguration and Operation section of this Operating Manual) before securing the unit in its mouing bracket. Then, use an appropriate fastener to secure the bracket to a safe, dry location, and carefully snap the KD-V5 io its mouing bracket. If you need to remove the unit from the mouing bracket, use care to pry the unit out without snapping the clips. Slide Switch 2 corols these two functions Slide Switch 1 corols these two functions KD-V5 Secure the mouing clip to a wall or other surface, and carefully insert the KD-V5 io the clips Mouing Clip, provided KD-V5_Manual.indd 8-9 The 3 Slide Switches determine the Sync Input / Output modes Slide Switch [ 1 ] [ 2 ] [ 3 ] 8/2/06 11:56:13 M

7 Page 10 nfiguration and Operation (coinued) Video Formats The KD-V5 supports only the following, most popular analog ierlaced and progressive video formats, like HDTV, NTSC, and PL: 1080i (60 & 50 Hz) 720p (60 & 50 Hz) 480p (60 Hz) 576p (50 Hz) 576i (50 Hz, SCRT only) Slide Switch Sync Settings Page 11 Locate the block with the three (3) small Slide Switches labeled on the side of the unit, near the Pb Y Pr Input connector. The Up position is the default position (most typical applications use these settings) that corresponds to the Green LEDs being lit on the face of the unit. The Down position selects the corresponding Yellow LEDs active. Up for Green (default) LED selection Down for Yellow LED selection uto Sensing The KD-V5 senses the appropriate Mode of operation, using Iellige uto Sensing : -to- Mode -to- Mode If the Video input is connected with active sync on Y, the Iellige uto Sensing automatically forces the KD-V5 to the -to- Video Mode by sensing active sync on the Y Video signal. If there is no YPbPr input (in particular, no sync on the Y channel), the unit automatically selects the -to- Video Mode. See the pplication Exales earlier in this Operating Manual. In each mode (-to- Video or -to- Video) the corresponding Red LED should be lit. ctive sync on the Y Video input forces the KD-V5 to operate in the to- Video mode. To override this mode, you must turn off the Video source. However, you may also need to disconnect the Y cable in some cases, in the eve the Video source coinues to provide sync on the Y channel even when power is not supplied to the Video source (this may happen in some instances with e.g. a Set Top ox). Switch 3 Switch 2 Switch 1 Switch in the DOWN position Yellow LED ON SCRT Input: Video and osite Sync on H Video Out: Sync is on the Green channel (s) Video Out: osite Sync provided on the H Output Slide Switch [ 1 ] [ 2 ] [ 3 ] Default : Switch in the UP position Green LED ON Video Input on the HD-15 VG Input connector Video Output, with separate H & V sync Video Output, with separate H & V sync (the H channel carries H sync and not osite Sync) KD-V5_Manual.indd /2/06 11:56:15 M

8 Page 12 Technical Specifications Model #: KD-V5 -to- or -to- Video dapter nalog Video Modes -to- (YPbPr) Video conversion lso supports SCRT Video input -to- Video conversion uto Sensing Iellige uto Sensing automatically switches from -to- Video or -to- Video by sensing active sync on the Y Video signal If the Video input is connected with active sync on Y, the Iellige uto Sensing automatically forces the KD-V5 to the -to- Video Mode by sensing active sync on the Y Video signal If there is no YPbPr input (in particular, no sync on the Y channel), the unit automatically selects the -to- Video Mode Sync Modes Video with sync on Y Video with separate H & V sync dditional sync modes supported: Video with sync on green (s) SCRT input ( Video plus osite Sync on H input) osite sync on H output Pass-through llows connections to two display types: -to- (YPbPr) Video conversion drives the Video HD display, while the pass-through drives an display -to- Video conversion drives the display, while the Video pass-through drives the Video HD display Resolution The output resolution = the input resolution Performs no video processing atible Video Signals Page 13 Supports most analog ierlaced and progressive video formats, at 60 Hz or 50 Hz, like HDTV, NTSC, and PL: 1080i (60 & 50 Hz) 720p (60 & 50 Hz) 480p (60 Hz) 576p (50 Hz) 576i (50 Hz, SCRT only) nalog Video Characteristics Output stage drives high-quality, equal-length video cables up to 50 1V 75 ohms, terminated osite video sync on Y input (YPbPr) Video bandwidth: MHz Linear phase pass-band Unity video gain Each input of the KD-V5 has its own 75 Ω termination Do not daisy chain inputs nnectors Input Port and Output Port are HD-15 VG female connectors YPbPr Video Input Port and Output Port are color-codes RC female jacks for each co 3.5 mm jack for the external power supply input KD-V5_Manual.indd /2/06 11:56:15 M

9 Page 14 Page 15 Mechanical Size: 4.75 x 2 x 0.75 Weight: 0.5 lbs. Shipping weight: 1.0 lb. Enclosure Type: Plastic Mouing: Wall mouing bracket Power Requiremes External power supply provided + 5V 1 s, VC, Hz CUTION: No other power supply adapter can be used with this unit! Using a power supply other than the provided by Key Digital with the unit VOIDS THE ENTIRE PRODUCT WRRNTY, may cause damage to the unit and associated equipme, and is a poteial safety hazard. How to act Key Digital Repairs and Warray Service Should your KD-MSW4x2Pro distribution alifier and switcher require warray service, please coact Key Digital to obtain a Returned Materials uthorization (RM) number Please coact us at either: Ph: ext rma@keydigital.com Technical Support For technical questions about using our products, please coact us at either: Ph: ext tech@keydigital.com Customer Support For customer support questions about using our products, please coact us at either: Ph: ext customersupport@keydigital.com Warray ll Key Digital products are built to high manufacturing standards and should provide years of trouble-free operation. They are backed by a limited two-year parts and labor warray. KD-V5_Manual.indd /2/06 11:56:17 M

10 Page 16 Page 17 Installation Notes Installation Notes KD-V5_Manual.indd /2/06 11:56:18 M