Getting started with Coin

Transcription

1 Getting started with Coin

2 Setting Up Coin For App version 1.5+, follow these steps to start using Coin. Coin Device Sync VISA /15 Sync Coin Add your cards to the Coin app Open the app and add your card using the card reader. For most cards, we re able to automatically verify that you own the card. For some cards, you may be prompted with a temporary authorization charge. Tip: Keep the card reader and mobile device as still as possible when swiping. supportcenter.onlycoin.com/addcardstoios supportcenter.onlycoin.com/addcardstoandroid Sync your cards onto Coin Tap Sync Coin and select up to 8 cards to sync over to Coin. Tip: Each time you sync, existing cards on Coin are cleared, and the ones you selected are added. supportcenter.onlycoin.com/sync

3 Setting Up Coin For App version 1.5 or less, follow these steps to start using Coin SYNC Add your cards to the Coin app Pair your Coin with your account Sync your cards onto Coin Open the app and add your card using the card reader. For most cards, we re able to automatically verify that you own the card. For some cards, you may be prompted with a temporary authorization charge. Tip: Keep the card reader and mobile device as still as possible when swiping. This establishes a secure bond between your Coin and your phone based on your account. Tip: Press the button on Coin once to wake it up. Then press and hold the button for a few seconds until the Coin displays SYNC. After you ve paired, select up to 8 cards and sync them over to Coin. Tip: Each time you sync, existing cards on Coin are cleared, and the ones you selected are added. supportcenter.onlycoin.com/addcardstoios supportcenter.onlycoin.com/addcardstoandroid supportcenter.onlycoin.com/pair supportcenter.onlycoin.com/sync

4 Using Coin VISA AMEX , ,15 By default, your Coin will be off. If security features are enabled, and Coin detects your phone is nearby, Coin will automatically unlock. Change cards by pressing the button. Coin can be used at millions of places, including corner stores, restaurants, ATMs, grocery stores, and big-name retailers. Tip: If the first swipe of Coin fails, try swiping slower. Need more help? Try supportcenter.onlycoin.com/useyourcoin

5 Coin Security Coin has been built to prevent fraud, protect your card data, and to give you peace-of-mind. LOCK Security is on by default, and your Coin automatically locks when not in use. If your Coin is lost or stolen, three failed unlock attempts will erase your data. The mobile app keeps track of where you last used your Coin. Need more help? Try supportcenter.onlycoin.com/secureyourcoin

6 Coin Features VISA /15 Display Card Expiration Date Stripe Reader Last 4 Digits of Card Button LED Light Card Reader Headphone Jack Connector XXXXXXXXXX Stripe Serial Number Signature Panel Stripe (Behind) Front Back

7 Your Coin is now ready for the world! Learn more at support.onlycoin.com. and the Coin logo are trademarks of Coin, Inc. FCC Regulatory Details FCC ID: 2ACCX-V0 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. FCC Part statement Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Want more details? Checkout