PRODUCT TYPE (WOOD) PARTICLEBOARD (CHIPBOARD) CHIPBOARD FINSA UNITARY ELEMENTS FINSA. Product family: PARTICLEBOARD (CHIPBOARD)

Transcription

1 (WOOD) PARTICLEBOARD (CHIPBOARD) PRODUCT TYPE UNITARY ELEMENTS FINSA CHIPBOARD FINSA CHIPBOARD FINSA Product family: PARTICLEBOARD (CHIPBOARD) FINSA Fimapan, Fimapan 400, Fimapan AF, Fimapan E-Z, Fimapan Hidrófugo, Fimapan Ignífugo, Fimapan Lit, Fimapan Losetas, Fimapan Losetas AF, Fimapan Puertas, Fimapan Ultralight, Fimaplast, Fimanatur, SuperPan, SuperPan PLUS, SuperPan star, Superpan Tech P5, P6, Encoform, SuperPan Top, Superpan Decor, SuperPan Natur and its qualities??(ignifugo, Hidrófugo, EZ, etc) Formats: Thickness (mm) Width (mm) (mm) = From 5 to 44 mm = From 1220 to 2440 Length = From 2440 to 5700 mm finsa@finsa.es Link to spec sheet %20E- Z?OpenDocument&L=ES&C=Madera técnicaaglomerado&v=webdatos_soporte-es&f=madera técnica Date Feb.2014 Notes 1. The information contained in this document corresponds to an approximation of the possible compliance of the category corresponding to the environmental certification system chosen to study (LEED and VERDE) based on the information the company has provided. To ensure the compliance posibility of such credits will always be necessary to verify the information and data provided by the company, and make the relevant specific study (even though the company has already made a preliminary study). This document is not a product certification or guarantee compliance with local laws. 2. Obtaining the percentage reduction in impact or points obtained in the certification depends on the overall performances of all materials and products used in building construction to certify. 3. The findings of this study apply only to the products mentioned in this report and is subject to the stability of the technical conditions of the product, and the stability of the requirements addressed by environmental certification systems under study. 4. In the absence of changes in the characteristics of the product referred or variation in versions of the certification tool that affect product evaluation, the validity of the record shall be 2 years from the date of publication of this report, Feb 2014

2 POINTS 1-2* Credit: MR c4: Recycled Content Use materials with recycled content to reduce the demand for raw material. There are 2 types of recycled content in the materials: 1. Post consumer (material that have reached the end of its life cycle) 2. Pre consumption (prior to consumer use and therefore materials that have not come to be used, such as cuts or leftovers from the process of manufacture of the material) The higher the post consumer content, the higher the percentage achieved in recycled content. The sum of the percentage will be calculated by the post-consumer recycled content plus one-half of pre-consumer recycled content. Based on the total cost of material used in the project. The amount of recycled content of post-consumer and half of pre-consumer should be at least 10-20% of the total cost of the value of materials in the project. Multiply the total percentage of recycled content by total material cost. Product Raw material Total recycled Postconsumer Total recycled Pre-consumer FIMAPAN (Finsa Santiago) 90% 14% 11% SUPERPAN (Finsa Porto) 90% 25% 2% FIMAPAN (Finsa Cella) 90% 63% 13% If the product is FSC certified, post consumer percentage is 100% for the control system used. * NOTE: The final result to determine the total points depends on the calculation of all building materials. This material contributes to meet the sustainability criteria ADITIOL LEED: Notes The information contained in this document is based on the study of reference guide: Green Building Design and Construction This document does not constitute product certification. Sustainable sites Water Efficiency Materials and Resources Energy and atmosphere Indoor Air Quality Innovation in Design

3 POINTS 1-2* Credit: MR c5: Regional Material To increase demand for building material and products that are extracted and manufactured within the local region. Use building materials or product that are extracted, harvested or recovered, as well as manufactured within 500 miles (800km) from the construction site. Estimate the percentage of local materials, considering a range of 500 miles (800km) and the distance of both the raw material and the final product weighted means of transport: railway, inland waterway, maritime and others. Product Components Percentage of the final product Extraction address Manufacturer address Finsa Santiago Finsa Porto N-550 km Santiago Freixieiro Perafita (Matosinhos) Portugal N-550 km Santiago (A Coruña) Freixieiro Perafita (Matosinhos) Portugal Finsa Cella Partida de Hazas s/n Cella Partida de Hazas s/n Cella (Teruel) NOTE: The final result to determine the total points depends on the calculation of all building This credit is calculated within the 500miles radius drawn from the project site location. ADITIOL

4 POINTS 1* (1 ID) Credit: MR c6: Rapidly Renewable Materials To reduce the use and depletion of finite raw materials and long-cycle renewable materials by replacing them with rapidly renewable materials. Use rapidly renewable building materials and products from 2.5% of the total value of all buildings materials and products used in the project, based on the cost. Rapidly renewable building materials and products are made form plants that are typically harvested within a 10-year or shorter cycle. Data corresponding to all products: % Rapidly renewable material Information source 90 Manufacturer *NOTE: The final result to determine the total points depends on the calculation of all building ADITIOL

5 POINTS 1* 1* 1* Credit: MR c7: Certified Wood To encourage environmental responsible forest management. Use a minimum of 50% (based on cost) of wood-based materials and products that are certified in accordance with e Forest Stewardship Council s principles and criteria, for wood building components. These components include at a minimum, structural framing and general dimensional framing, flooring, sob-flooring, wood doors and finishes. Include only materials permanently installed in the project. Wood products purchased for temporary use on the project (e.g. formwork, bracing, scaffolding, sidewalk protection, and guard rails) may be included in the calculation at the project team s discretion. If any such materials are included, all such materials must be included in the calculations. In such materials are purchased for use on multiple projects, the applicant may be included if it is included consistently in MR c3: Material Reuse, through MR c7: Certified Wood (MR c 6 for Core & Shell projects). Products identified as FSC Pure, FSC Mixed and FSC Mixed (NN)% are included. Are not taken into account in calculating the products identified as FSC Recycled. Data corresponding to all products: Products Certification FINSA FSC Mixed (100) NOTE: The final result to determine the total points depends on the calculation of all building ADITIOL DOCUMENTATIO N