ENVIRONMENTAL DATA SHEET

Transcription

1 ENVIRONMENTAL DATA SHEET Glueless Engineered made of real hardwood boards with a high density fiber core, microv bevel on 4 sides and Rightloc locking system. VALIDATED ECODECLARATION PRODUCT SPECIFICATIONS Reference 7/6 thick hardwood Manufacturing location StGeorges, Quebec G5Y 8J5 Canada Composition HDF, wood, veneer, adhesives and finishes Recycled content Preconsumer: 62% Postconsumer: 0% Regional content The extraction location has been documented for 99% of raw materials used in manufacturing the final product, based on a weight ratio. FSC Certification Rapidly renewable materials RACOC00299 ENVIRONNEMENTAL IMPACTS Life Cycle Assessment Product s carbon footprint Environmental Product Declaration (ISO 4025) INGREDIENTS AND EMISSIONS Declaration of chemical ingredients Type of declaration Emissions test VOCs Formaldehyde 00% Health Product Declaration (in progress) Compliant as per CDPH CDPH results 0.5 mg/m 3 CDPH results 9.0 ug/m 3 Product's contribution to LEEDv4 TECHNICAL PERFORMANCE Performance test ASTM E84 / ASTM D2047 /ASTM D4060 Expected life End of life disposal 95% landfilled / 5% incineration in Canada 80% landfilled / 20% incineration in USA MANUFACTURER S ENVIRONMENTAL MANAGEMENT ISO 400 Certification Take Back Program Corporate Sustainability Reporting (Global Reporting Initiative) CERTIFICATIONS AND CONFORMITY REPORTS Biobased materials Other CARB 9320 compliant Mirage prefinished hardwood floors, designed and manufactured by BoaFranc, are synonymous with superior quality, beauty, and durability and guarantee product consistency, added value, and lifelong good looks. Mirage epitomizes attention to detail and the desire to create a product in perfect harmony with its environment. 255, 98 th Street, SaintGeorges, Quebec G5Y 8J5 Canada Master Format: Validated EcoDeclaration: VED Original issue date: 2009/06

2 Real hardwood boards with a high density fiber core. Boards interlock with one quick movement thanks to RightLoc technology, available in 45/6 in. [09 mm] width. All finishes are VOC and formaldehyde free for better air quality. MicroV bevel (on 4 sides). RECYCLED CONTENT Weight ratio Preconsumer Postconsumer Product component HDF 76% 8% 0% Final assembled product 00% 62% 0% Validated EcoDeclaration Recycled content Procedure: onsite audit, supply chain evaluation, analysis and validation of the recycled content data according to the weight ratio of each of the components used in manufacturing the final product. Method: VERT , First Edition REGIONAL CONTENT Weight ratio Final manufacturing location 00% G5Y 8J5 Validated EcoDeclaration Regional content Procedure: onsite audit, supply chain evaluation, analysis and validation of the regional content data according to the weight ratio of each of the components used in manufacturing the final product. Method: VERT , First Edition Product components HDF Wood Veneer Adhesives Finishes Weight ratio 76% 5% 8% < % < % The extraction location has been documented for 99% of materials of the final product components, based on weight ratio. and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 2

3 REGIONAL CONTENT (CONTINUED) EXTRACTION ZONE OF RAW MATERIALS Manufacturing location of BoaFranc SaintGeorges, Qc Canada Extraction zone of raw materials used in manufacturing the. HARVEST LOCATION OF HDF: (Details available upon request) 2. HARVEST LOCATION OF WOOD: (Details available upon request) Canada: Quebec, NewBrunswick, Ontario. United States: (Arkansas, North Carolina, South Carolina, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Tennessee, Virginia, West Virginia, Vermont, Wisconsin). 3. HARVEST LOCATION OF VENEER: (Details available upon request) and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 3

4 FSC CERTIFICATION When specified, FSC certified Mirage Lock Floors are available for the following wood species: Maple and Red Oak. BoaFranc Mirage Lock Floors % of FSC certified wood SaintGeorges, QC, Canada 5% This result is based on total weight of the FSC certified wood components in the final assembly of the product versus the total weight of the wood. Certification number Type of certification Period of validity RACOC00299 FSC Mix Credit to Validated EcoDeclaration FSC Certification Procedure: onsite audit, supply chain evaluation and validation of FSC certification documents confirming the type of certification and calculation, based on weight ratio, of the wood that is FSC certified in the final product. Method: VERT , First Edition INGREDIENTS AND EMISSIONS MATERIAL INGREDIENTS REPORTING Declaration of chemical ingredients Type of declaration 00% Health Product Declaration in progress Validated EcoDeclaration Material ingredients Procedure: validation of the documentation providing the methodology and reporting of chemical ingredients. Method: VERT , First Edition and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 4

5 INGREDIENTS AND EMISSIONS EMISSIONS TESTING Product category Mirage Lock Floors Red Oak and Maple samples were selected and expected to give the worstcase results for the TESTING AND EVALUATION OF VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS VERSION. (8.7..4). Mirage Lock Floors made with variable components may be grouped together for testing purposes given that the worstcase samples were provided for testing. As specified in the STANDARD METHOD FOR THE TESTING AND EVALUATION OF VOLATILE ORGANIC CHEMICAL EMISSIONS FROM INDOOR SOURCES USING ENVIRONMENTAL CHAMBERS VERSION. : A range of product models, brands and/or styles with varying characteristics may be grouped together for testing purposes if the products can be expected to have virtually the same performance during testing and use. A test group shall only include models which are made using the same production methods and are comprised of the same product ingredients (formulation). The test sample shall be selected from the model in the group that can be expected to give the worst results for the test taking into consideration special attributes, materials, methods of manufacturing, suppliers, etc. Testing method California Department of Public Health CDPH/EHLB/Standard Method Version., 200 (Emission testing method for CA Specification 0350) Certificate number: Oak /Maple Issue Date: November 6, 205 Analytical Lab: Berkeley Analytical. Exposure scenarios & product quantities for classroom & office are defined in Tables (CDPH Std. Mtd. V.200) 2. Maximum allowable concentrations of individual target VOCs are specified in Table 4 (ibid.) 3. Maximum allowable formaldehyde concentration is 9 µg/m3, effective Jan, 202; previous limit was 6.5 µg/m3 (ibid.) 4. Informative only; predicted TVOC Range in three categories, i.e., 0.5 mg/m3, > mg/m3, and 5.0 mg/m3 5. Informative and applicable only to tests of wetapplied products; grams of sample applied per square meter of substrate Source: Berkeley Analytical VOC Emission Test Certificate Validated EcoDeclaration Emissions testing Procedure: validation of documents certifying the test results. Method: VERT , First Edition and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 5

6 TECHNICAL PERFORMANCE PERFORMANCE TESTS Nonexhaustive list. See general product specifications sheet. Fire resistance testing (surface burning ASTM E84); Static friction coefficient (ASTM D2047); Taber abrasion test (ASTM D4060). EXPECTED LIFE Warranty Structural lifetime limited warranty; Thirtyfive (35) years warranty on finish wearthrough when used under normal residential traffic conditions; Three (3) years warranty on finish wearthrough when used under light commercial conditions; ENDOFLIFE DISPOSAL Typical disposal in Canada 95% landfill 5% incineration Typical disposal in USA 2 80% landfill 20% incineration Source: Statistics Canada. (2005). Human Activity and the Environment: Annual Statistics, catalogue number 620XIE. 2 Source: United States Environmental Protection Agency. (202). Municipal Solid Waste Generation, Recycling, and Disposal in the United States. and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 6

7 MANUFACTURER S MANAGEMENT PROGRAMS IN PLACE CERTIFICATION (ISO ) Certification number Certification agency Period of validity FM BSI Group America Inc. June 2, 208 Validated EcoDeclaration ISO Certification Procedure: validation of documents attesting the ISO Certification. Method: VERT , First Edition SUPPLY CHAIN MANAGEMENT REPORT Report name Controlled Wood Risk Evaluation Date January 205 Validated EcoDeclaration Supply chain management report Procedure: validation of documents attesting the supply chain management report. Method: VERT , First Edition MANUFACTURER S ENVIRONMENTAL MANAGEMENT COMPANY S COMMITMENT 00% of wood waste generated in the manufacturing of Mirage floors is recovered and recycled. Part of it is used to fuel the boilers that dry the wood. The rest is sold and transformed into:. Logs and pellets for heating 2. Wood fiber panels and agglomerated particles 3. Farm animal bedding Mirage uses 00% recycled and recyclable carton for their packaging. A recycling program was developed in collaboration with a local organization to recycle old electronic equipments (e.g., casing, screens, printers, and ink cartridges). and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 7

8 PRODUCT CONTRIBUTION SUMMARY LEED v4 requirements for Building Design + Construction (BD+C) New Construction, Core Shell, School, Retail, Data Centers, Warehouse and Distribution Centers, Hospitality and Healtcare. LEED v4 requirements for Interior Design + Construction (ID+C) Commercial Interiors, Retail and Hospitality. Materials and Resources MR MR Building Product Disclosure and Optimization Sourcing of Raw Materials Option 2: Leadership extraction practices Building Product Disclosure and Optimization Material Ingredients Option : Material ingredients reporting Indoor Environmental Quality Points point point Points Product Contribution Recycled content (62% preconsumer) and FSC Certified (5%) INGREDIENTS AND EMISSIONS HPD (in progress) Product Contribution EQ LowEmitting Materials Option : Product category calculation (Category: Flooring) Depending on which rating system and the number of compliant categories. 3 points INGREDIENTS AND EMISSIONS CDPH test LEED v4 requirements for Homes Applies to single family homes, lowrise multifamily (one to three stories), or midrise multifamily (four to six stories); includes Homes and Multifamily Lowrise and Multifamily Midrise. Materials and Resources Points Product Contribution MR Prereq Certified Tropical Wood FSC Certified (except Sapele) MR Credit 2 Environmentally Preferable Products Option 2: Environmentally Preferable Products At least 90% of each compliant building component (Mirage Lock Floors contributes to 0.5 point for Recycled content and 0.5 point for FSC Certified). point Recycled content (62% preconsumer) and FSC Certified (5%) Indoor Environmental Quality Points Product Contribution EQ LowEmitting Materials 2 At least 90% of a component must meet the requirements to earn the credit. (Mirage Lock Floors contributes to 0.5 point for CDPH test). 0.5 point 2 (for flooring compliance) INGREDIENTS AND EMISSIONS CDPH test It is important to consider that the total amount of possible points reflects the number of achievable points in each credit category. The product itself cannot achieve this score, as defined above, but is considered as a beneficial element in order to achieve LEED credits. and the integrity. Vertima follows a rigorous protocol, including an onsite audit of the factory, an audit of the manufacturer s supply chain Validated EcoDeclaration: VED Page 8