Lucas-Nülle GmbH 1/9

Transcription

1 ... 1 Technika automatyzacji... 2 Automation technology... 2 Automation technology with Siemens PLC... 3 PLC application models and Process simulators... 4 CLC 34 PLC universal application simulator... 4 Lucas-Nülle GmbH 1/9

2 Technika automatyzacji Acquire practical and project-oriented laboratory skills and expertise: Automation trainers, mechatronics trainers, PLC trainers Automation technology Automation technology Due to the growing importance of process automation the area of automation technology is taking on an ever greater role in industrial operations. This applies both for standard operations in production as well as for vocational training. Today automation technology almost always involves drive technology, closed-loop control and computer engineering. Due to the rapid developments in microcontroller and computer technology, automation has become one of the most innovative and breathtaking of all the areas of electrical engineering and electronics. Add to that the fact that novel industrial solutions like decentralisation and visualisation require new vocational training systems. Furthermore, the hitherto sheer multitude of manufacturer-dependent software products has been replaced by the international standard IEC Contemporary programmable logic controls will now be programmed in accordance with standardised rules. All of these demands mean that there is a need to have the automation technician of today trained on practice-oriented training systems which convey to the student both the latest technology but also endow him or her with the required skills and competency. Lucas-Nülle GmbH 2/9

3 Automation technology with Siemens PLC Automation technology with Siemens PLC Lucas-Nülle GmbH 3/9

4 PLC application models and Process simulators PLC application models and Process simulators The objective of PLC training is for the student to acquire practical hands-on skills. The prerequisite for this is systematic-didactic instruction in both form and content. This allows the necessary knowledge and skills to be conveyed in a practical, fast, effective and cost-efficient manner. The hands-on oriented experimentation and training using the process simulators and the process simulations are designed to meet these requirements. As such these training systems constitute the foundation for teaching not only the fundamentals but also advanced PLC programming. Lucas-Nülle GmbH 4/9

5 CLC 34 PLC universal application simulator CLC 34 PLC universal application simulator The PLC universal system simulator was designed especially for PLC basic training. It is compact and constructed according to the motto "set up, switch on and train". It is exceptionally well-suited to graphically demonstrate open-loop and closed-loop industrial applications. By using the masks up to 24 different technical processes and models can be simulated. Lucas-Nülle GmbH 5/9

6 Supplementary equipment set to the basic equipment set CLC 15/30: Supplementary equipment set to the basic equipment set CLC 15/30: Pos. Bezeichnung Bestell-Nr. Anz. 1 PLC uniwersalny symulator aplikacji CO3715-1A 1 Simply combine the universal PLC application simulator with any of the various PLC applications and circuits (analog and digital) to implement practical exercises with very little installation. The experiments are based on a standard syllabus. The application simulator is equipped with switches and pushbuttons as sensors as well as LEDs and an electronic circuit to simulate actuators. Process feedback signals (e.g. feedback signals from the contactors) are generated automatically. To simulate movements, levels and positions there are 3 running lights integrated into the device. The individual experiments are ready to perform after the overlay masks are fitted. 8 digital inputs (actuators) 20 digital outputs (sensors) 2 analog inputs (actuators) 2 analog outputs (sensors) 3 running lights Connections realised on 4mm safety sockets 1 37-pin sub-d male connector (input signals) for the connection to PLC via system connector 1 37-pin sub-d socket (output signals) for connection to the PLC via the system connector Operating voltage: DC 24V/0.3A Size: 456 x 297 x 125mm (WxHxD) Weight: 1 kg Lucas-Nülle GmbH 6/9

7 2 Zestaw nakładek do uniwersalnego symulatora aplikacji I (12 szt.) CO3715-1B 1 Basic set of overlay masks for the PLC Universal Application Simulator. The basic set consists of 12 different overlay masks with process and application models. Construction caution light Star-delta starting Dahlander circuit Starter control Monitoring device Reservoir - filling system Gate control of a lock Re-rooting platform Buffer storage Filling level controlled system Mixer system Compressed air network 3 Zestaw nakładek do uniwersalnego symulatora aplikacji II (12 szt.) CO3715-1C 1 The supplementary set of overlay masks for the PLC universal application simulator. The supplementary set comprises 12 different overlay masks with process and application models. Cleaning bath Oven door control Bending tool Stamping machine / automatic Drilling mechanism Selective distributor Tube bending plant Gate control Pump control 1 Pump control 2 Reaction chamber Automatic tablet packer Lucas-Nülle GmbH 7/9

8 Materialy szkoleniowe: Materiały szkoleniowe: Pos. Bezeichnung Bestell-Nr. Anz. 4 Interactive Lab Assistant: CLC 34 Universal plant simulator SO2800-4J 1 The experiment instructions take the form of an Interactive Lab Assistant course. This multimedia course guides students step by step through the topic of PLC programming. 24 Projects are included: Construction site traffic lights Star-delta starter Dahlander circuit Starter control Monitoring facility Container filling plant Control of a lock gate Transfer platform Buffer memory Filling level control loop Mixing plant Compressed air network Cleaning tank Kiln door control Bending tool Embossing machine Drill Selective belt turnout Tube bending plant Gate control Pump control 1 Pump control 2 Reaction vessel Tablet bottling machine Features: Interactive experiment set-up Questions with feedback and evaluation logic for progress monitoring Printable document for simple printing out of instructions and solutions CD-ROM with Labsoft browser, course software and TIA Portal project Mininimum requirements: SIMATIC Manager version 5.5 or TIA Portal version 13 SP1 Lucas-Nülle GmbH 8/9

9 Akcesoria: Pos. Bezeichnung Bestell-Nr. Anz. 5 Zestaw kabli połączeniowych do złączy systemowych PLC SO5145-5B 1 For the connection of PLC process models or simulations to the PLC system connector, consisting of: 2 x connection cable Sub-D 37 pole 2 x safety protected connection plug, red 1 x safety protected connection plug, blue 6 Bezpieczny przewód pomiarowy, 4 mm, 25 cm, czerwony SO5126-8A 1 Safety measurement lead with stackable, contact-proof 4mm plugs colour: red length: 25 cm cable cross-section 2,5 mm 2 ratings deliver: 600V CAT II, 32A 7 Moduł złącza systemowego do PLC CO3713-7G 1 System connector module to extend the basic unit for SIMATIC S7-300 controls for the simple connection of process models without having to carry out extensive wiring of the individual lines pin sub-d male connector (input signals) 1 37 pin sub-d socket (output signals) Dimensions: 125 x 65 x 25mm (HxWxD) Lucas-Nülle GmbH 9/9