PUBLICATIONS. Stéphane DAUZERE-PERES

Transcription

1 PUBLICATIONS Stéphane DAUZERE-PERES HABILITATION HDR de l Université Paris VI, Paris, June Jury : J. Carlier (Professeur à l Université Technologique de Compiègne, rapporteur) P. Chretienne (Professeur à l Université Paris VI) Y. Dallery (Directeur de Recherche au Laboratoire d Informatique de Paris VI) J.B. Lasserre (Directeur de Recherche au LAAS/CNRS) E. Pinson (Professeur à l Université Catholique de l Ouest, Angers) C. Potts (Professeur à l Université de Southampton, Royaume-Uni, rapporteur) L. Van Wassenhove (Professeur à l INSEAD, Fontainebleau, rapporteur). PHD THESIS Planification et Ordonnancement de la Production : une Approche Intégrée Cohérente Thèse de docteur de l Université Paul Sabatier, Toulouse, March Jury : E. Balas (Professeur à l Université Carnegie-Mellon, Pittsburgh, USA, rapporteur) M. Courvoisier (Professeur à l Université Paul Sabatier, Toulouse) G. Doumeingts (Professeur à l Université de Bordeaux et Directeur du GRAI, rapporteur) G. Fontan (Professeur à l I.N.P. de Toulouse) J.B. Lasserre (Chargé de Recherche au LAAS/CNRS, Directeur de Thèse) F. Roubellat (Directeur de Recherche au LAAS/CNRS, rapporteur) L. Van Wassenhove (Professeur à l INSEAD, Fontainebleau). BOOK AND BOOK CHAPTERS 1. S. Dauzère-Pérès, J.B. Lasserre, An Integrated Approach in Production Planning and Scheduling. Lecture Notes in Economics and Mathematical Systems, Vol. 411, Springer- Verlag, S. Dauzère-Pérès, J.B. Lasserre, Planification et Ordonnancement Intégrés, chapter of Concepts et Outils pour les Systèmes de Production du groupe Systèmes de Production du LAAS- CNRS, Cépaduès Editions, S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Ordonnancement avec Allocation de Ressources, chapter of Concepts et Outils pour les Systèmes de Production du groupe Systèmes de Production du LAAS-CNRS, Cépaduès Editions, S. Dauzère-Pérès, P. Castagliola, C. Lahlou, Niveau de service en ordonnancement, chapter of Flexibilité et robustesse en ordonnancement, Hermès, J.R. Montoya-Torres, S. Dauzère-Pérès, L. Vermariën, A Consistent Approach for Vehicle Planning and Control in Large Unified Automated Material Handling Systems, chapter of Progress in Material Handling Research : 2006, R. Meller, M.K. Ogle, B.A. Peters, G.D. Taylor, J. Usher (Editors), ISBN , Material Handling Institute, S. Dauzère-Pérès, P. Castagliola, C. Lahlou, Service Level in Scheduling, Chapter of Flexibility and Robustness in Scheduling, ISBN , Wiley,

2 7. J.E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën, Improved Vehicle Management for Large Unified AMHS in Semiconductor Manufacturing Facilities, chapter of Progress in Material Handling Research : 2008, K. Ellis, R. Meller, M.K Ogle, B.A Peters, G.D. Taylor, J. Usher (Editors), ISBN , Material Handling Institute, J.E. Kiba, S. Dauzère-Pérès, C. Yugma, G. Lamiable, Comparing Transport Policies in a Full-Scale 300mm Wafer Manufacturing Facility, chapter of Progress in Material Handling Research : 2010, K. Ellis, K. Gue, R. de Koster, R. Meller, B. Montreuil, M.K Ogle (Editors), ISBN , Material Handling Institute, N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Just-in-time planning and lotsizing. Chapter in Just-in-time systems. Series on Optimization and Its Applications (Y.A. Ros-Sols, R.Z. Ros-Mercado, eds.), Springer, vol. 60, pp , INTERNATIONAL JOURNALS 1. S. Dauzère-Pérès, J.B. Lasserre, A Modified Shifting Bottleneck Procedure for Job-Shop Scheduling. International Journal of Production Research 31, 4, pp , S. Dauzère-Pérès, J.B. Lasserre, Integration of Lotsizing and Scheduling Decisions in a Job-Shop. European Journal of Operational Research 75, pp , S. Dauzère-Pérès, Minimizing Late Jobs in the General One Machine Scheduling Problem. European Journal of Operational Research 81, 1, pp , S. Dauzère-Pérès, A Procedure for the One-Machine Sequencing Problem with Dependent Jobs. European Journal of Operational Research 81, 3, pp , P.J. Zwaneveld, S. Dauzère-Pérès, S.P.M. van Hoesel, L.G. Kroon, H.E. Romeijn, M. Salomon, H.W. Ambergen, Routing Trains Through Railway Stations: Models and Algorithms. Transportation Science 30, 3, pp , S. Dauzère-Pérès, J.B. Lasserre, Lot Streaming in Job-Shop Scheduling. Operations Research 45, 4, pp , M. Salomon, M.M. Solomon, L.N. van Wassenhove, Y. Dumas, S. Dauzère-Pérès, Solving The Discrete Lotsizing and Scheduling Problem with Sequence Dependent Set-up Costs and Set-up Times Using the Travelling Salesman Problem with Time Windows. European Journal of Operational Research 100, pp , S. Dauzère-Pérès, J. Paulli, An Integrated Approach for Modeling and Solving the General Multiprocessor Job-Shop Scheduling Problem Using Tabu Search. Annals of Operations Research 70, pp , S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Multi-Resource Shop Scheduling with Resource Flexibility. European Journal of Operational Research 107, pp , W. Roux, S. Dauzère-Pérès, J.B. Lasserre, Planning and Scheduling in a Multi-Site Environment. Production Planning and Control 10, 1, pp , S. Dauzère-Pérès, S.B. Gershwin, M. Sevaux, Models and Solving Procedures for Continuous-Time Production Planning. IIE Transactions 32, pp , S. Dauzère-Pérès, J.B. Lasserre, On the Importance of Sequencing Decisions in Production Planning and Scheduling. International Transactions in Operational Research 9, 6, pp ,

3 13. M. Sevaux, S. Dauzère-Pérès, Genetic Algorithms to Minimize the Weighted Number of Late Jobs on a Single Machine. European Journal of Operational Research 151, 2, pp , S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minimize the Weighted Number of Late Jobs on a Single Machine. Naval Research Logistics 50, pp , S. Dauzère-Pérès, C. Pavageau, Extensions of an Integrated Approach for Multi-Resource Shop Scheduling. IEEE Transactions on Systems, Man and Cybernetics, Part C, 33, 2, pp , S. Dauzère-Pérès, M. Sevaux, An Exact Method to Minimize the Number of Tardy Jobs in Single Machine Scheduling. Journal of Scheduling 7, 6, pp , N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli, Single Item Lot Sizing Problems. European Journal of Operational Research 168, pp. 1-16, S. Martinez, S. Dauzère-Pérès, C. Guéret, Y. Mati, N. Sauer, Complexity of Flowshop Scheduling Problems with a New Blocking Constraint. European Journal of Operational Research 169, pp , C. Lahlou, S. Dauzère-Pérès, Single machine scheduling with time windows dependent processing times. Journal of the Operational Research Society 57, 2, pp , N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Capacitated Multi-Item Lot-Sizing Problems with Time Windows. Operations Research 54, 5, pp , S. Dauzère-Pérès, A. Nordli, A. Olstad, K. Haugen, U. Koester, P.O. Myrstad, G. Teisklub, A. Reistad, Omya Hustadmarmor Optimizes Its Supply Chain for Delivering Calcium Carbonate Slurry to European Paper Manufacturers. Interfaces 37, 1, pp , I. Essafi, Y. Mati, S. Dauzère-Pérès, A Genetic Local Search Algorithm for Minimizing Total Weighted Tardiness in the Job-Shop Scheduling Problem. Computers & Operations Research 35, pp , S. Dauzère-Pérès, N. Sauer, Editorial: Feature cluster: Planning and Scheduling in Industrial and Logistic Systems. European Journal of Operational Research 199, 3, pp , N. Brahimi, S. Dauzère-Pérès, L.A. Wolsey, Polyhedral and Lagrangian approaches for lot sizing with production time windows and setup times. Computers & Operations Research 37, pp , A. Sarac, N. Absi, S. Dauzère-Pérès, A Literature Review on the Impact of RFID Technologies on Supply Chain Management. International Journal of Production Economics 128, 1, pp , S. Dauzère-Pérès, S. C. Sarin, C. Yugma, Editorial: Novel models and approaches for semiconductor manufacturing. Production Planning and Control 22, 1, pp. 1-3, C. Johnzén, S. Dauzère-Pérès, P. Vialletelle, Flexibility Measures for Qualification Management in Wafer Fabs. Production Planning and Control 22, 1, pp , J. R. Morrison, C.-F. Chien, S. Dauzère-Pérès, M. Dawande, H. Ding, J. S. Pettinato, J. YI, Guest Editorial: Equipment and Operations Automation in the Semiconductor Industry. IEEE Transactions on Automation Science and Engineering 8, 1, pp. 1-4,

4 29. Y. Mati, C. Lahlou, S. Dauzère-Pérès, Modeling and Solving a Practical Flexible Job-Shop Scheduling Problem with Blocking Constraints. International Journal of Production Research 49, 8, pp , N. Absi, S. Kedad-Sidhoum, S. Dauzère-Pérès, Uncapacitated Lot-Sizing Problem with Production Time Windows, Early Production, Backlog and Lost Sale. International Journal of Production Research 49, 9, pp , Y. Mati, S. Dauzère-Pérès, C. Lahlou, A General Approach for Optimizing Regular Criteria in the Job-Shop Scheduling Problem. European Journal of Operational Research 212, pp , N. Jedidi, P. Sallagoity, A. Roussy, S. Dauzère-Pérès, Oxide HDP-CVD modelling for Shallow Trench Isolation. IEEE Transactions on Semiconductor Manufacturing 24, pp , C.-F. Chien, S. Dauzère-Pérès, H. Ehm, J. W. Fowler, Z. Jiang, S. Krishnaswamy, T.-E. Lee, L. Mönch, J. Mason, R. Uzsoy, Modeling and Analysis of Semiconductor Manufacturing in a Shrinking World: Challenges and Successes. European Journal of Industrial Engineering 5, 3, pp , S. Housseman, N. Absi, S. Dauzère-Pérès, D. Feillet, Impacts of Radio-Identification on Cryo-Conservation Centers. ACM Transactions on Modeling and Computer Simulation 21, 4, 23 pages, L. Mönch, J. W. Fowler, S. Dauzère-Pérès, S. J. Mason, O. Rose, Scheduling Semiconductor Manufacturing operations: Problems, Solution Techniques, and Future Challenges. Journal of Scheduling 14, 6, pp , B. Detienne, S. Dauzère-Pérès, C. Yugma, Scheduling jobs on parallel machines to minimize a regular step total cost function. Journal of Scheduling 14, 6, pp , B. Detienne, S. Dauzère-Pérès, C. Yugma, An exact approach for scheduling jobs with regular step cost functions on a single machine. Computers & Operations Research 39, 5, pp , C. Yugma, S. Dauzère-Pérès, C. Artigues, A. Derreumaux, O. Sibille, A Batching and Scheduling Algorithm for the Diffusion Area in Semiconductor Manufacturing. International Journal of Production Research 50, 8, pp , F. Ramond, D. De Almeida, S. Dauzère-Pérès, H.D. Sherali, Optimized Rostering of Workforce Subject to Cyclic Requirements. Informatica 36, pp , N. Absi, B. Detienne, S. Dauzère-Pérès, Heuristics for the multi-item capacitated lot-sizing problem with lost sales. Computers & Operations Research 40, 1, pp , S. Dauzère-Pérès, L. Mönch, Scheduling jobs on a single batch processing machine with incompatible job families and weighted number of tardy jobs objective. Computers & Operations Research 40, 5, pp , N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Lot Sizing with Carbon Emission Constraints. European Journal of Operational Research 227, 1, pp ,

5 43. J. Nduhura Munga, G. Rodriguez-Verjan, S. Dauzère-Pérès, C. Yugma, P. Vialletelle, J. Pinaton, A Literature Review on Sampling Techniques in Semiconductor Manufacturing. IEEE Transactions on Semiconductor Manufacturing 26, 2, pp , C. Jimenez, S. Dauzère-Pérès, C. Feuillebois, E. Pauly, Optimizing the positioning and technological choices of RFID elements for aircraft part identification. European Journal of Operational Research 227, 2, pp , A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling Job Families on Non-Identical Parallel Machines with Time Constraints. Annals of Operations Research 213, 1, pp , E. Zehendner, G. Rodriguez-Verjan, N. Absi, S. Dauzère-Pérès, D. Feillet, Optimized allocation of straddle carriers to reduce overall delays at multimodal container terminals. To appear in Flexible Services and Manufacturing Journal, N. Absi, C. Archetti, S. Dauzère-Pérès, D. Feillet, A two-phase iterative heuristic approach for the Production Routing Problem. To appear in Transportation Science, A. Sarac, N. Absi, S. Dauzère-Pérès, Impacts of RFID technologies on supply chains: A simulation study of a three-level supply chain subject to shrinkage and delivery errors. To appear in European Journal of Industrial Engineering. 49. E. D. Gómez Urrutia, R. Aggoune, S. Dauzère-Pérès, Solving the Integrated Lot-Sizing and Job-Shop Scheduling Problem. International Journal of Production Research 52, 17, pp , C. Yugma, J. Blue, S. Dauzère-Pérès, A. Obeid, Integration of Scheduling and Advanced Process Control in Semiconductor Manufacturing: Review and Outlook. To appear in Journal of Scheduling, G. Rodriguez-Verjan, S. Dauzère-Pérès, J. Pinaton, Optimized Allocation of Defect Inspection Capacity with a Dynamic Sampling Strategy. To appear in Computers & Operations Research, N. Brahimi, S. Dauzère-Pérès, A Lagrangian Heuristic for Capacitated Single Item Lot Sizing Problems. To appear in 4OR - A Quarterly Journal of Operations Research, PATENT 1. C. Jimenez, S. Dauzère-Pérès, Overall Optimization of the Configuration of a Meshed Wireless Network of RF Devices in an Aircraft / Optimisation d ensemble de configuration d un réseau sans fil maillé de dispositifs radiofréquence dans un aéronef (EURO308PUSA)/(FR ). INTERNATIONAL CONFERENCES (with proceedings) 1. S. Dauzère-Pérès, J.B. Lasserre, A Modified Shifting Bottleneck Procedure for Job-Shop Scheduling. Second Inter. Workshop on Project Management and Scheduling, Compiègne, France, June S. Dauzère-Pérès, J.B. Lasserre, An Iterative Procedure for Lot Streaming in Job-Shop Scheduling. 15th Conf. for Computers and Industrial Engineering, Cocoa Beach, USA, March

6 3. S. Dauzère-Pérès, A Procedure for the One-Machine Sequencing Problem with Dependent Jobs. 15th Conf. for Computers and Industrial Engineering, Cocoa Beach, USA, March S. Dauzère-Pérès, Extensions of an Integrated Model for Job-Shop Planning and Scheduling. 9th Inter. Conf. on Systems Engineering, Las Vegas, USA, July S. Dauzère-Pérès, S.B. Gershwin, Switching Times in Continuous-Time Planning Japan-U.S.A. Symposium on Flexible Automation, Kobe, Japon, July S. Dauzère-Pérès, J.B. Lasserre, An Integrated Approach to Lot-Sizing and Scheduling Japan-U.S.A. Symposium on Flexible Automation, Kobe, Japan, July S. Dauzère-Pérès, J.B. Lasserre, Solving the Job-Shop and Flow-Shop Scheduling Problems with Lot Streaming. Fourth Inter. Workshop on Project Management and Scheduling, Leuven, Belgium, July W. Roux, S. Dauzère-Pérès, J.B. Lasserre, J. Paulli, A tabu search technique for scheduling with resource allocation. Fifth Inter. Workshop on Project Management and Scheduling, Poznan, Poland, April S. Dauzère-Pérès, An Efficient Formulation for Minimizing the Number of Late Jobs in Single- Machine Scheduling. Sixth IEEE Inter. Conf. on Emerging Technologies and Factory Automation (ETFA 97), UCLA, Los Angeles, USA, September W. Roux, S. Dauzère-Pérès, J.B. Lasserre, Comparing an Integrated and a Standard Planning and Scheduling Model. Sixth IEEE Inter. Conf. on Emerging Technologies and Factory Automation (ETFA 97), UCLA, Los Angeles, USA, September S. Dauzère-Pérès, M. Sevaux, Handling Discrete Demand in Continuous-Time Production Planning. 9th Symposium of the International Federation of Automatic Control on Information Control in Manufacturing, INCOM 98, Metz-Nancy, France, June S. Dauzère-Pérès, M. Sevaux, A Branch and Bound Method to Minimize the Number of Late Jobs on a Single Machine. Sixth Inter. Workshop on Project Management and Scheduling, Istanbul, Turkey, July S. Dauzère-Pérès, M. Sevaux, Control Policies for some Continuous-Time Production Scheduling Problems. Inter. Conf. on Industrial Engineering and Production Management, IEPM 99, Glasgow, United Kingdom, July N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli, A Review of Single Item Lot Sizing Problems. IEEE Inter. Conf. on Systems, Man and Cybernetics, IEEE SMC02, Tunis, Tunisia, September N.M. Najid, S. Dauzère-Pérès, A. Zaidat, A modified simulated annealing method for Flexible Job Shop Scheduling Problem. IEEE Inter. Conf. on Systems, Man and Cybernetics, IEEE SMC02, Tunis, Tunisia, September S. Martinez, S. Dauzère-Pérès, C. Guéret, Y. Mati, N. Sauer, Complexity of Flowshop Scheduling Problems with a New Blocking Constraint, Multiconference on Computational Engineering in Systems Applications 2003, CESA 03, Lille, France, July V. Laredo, S. Dauzère-Pérès, Optimization of Semiconductor Wafer Deliveries, Multiconference on Computational Engineering in Systems Applications 2003, CESA 03, Lille, France, July

7 18. J.R. Montoya Torres, S. Dauzère-Pérès, H. Marian, L. Vermariën, Analysis of transport strategies for full-automated semiconductor fabrication using large-scale facility models, 6th International Conference on Industrial Engineering, Besançon, France, June J.R. Montoya Torres, S. Dauzère-Pérès, H. Marian, L. Vermariën, Vehicle positioning in complex automated transport systems, 10th IEEE Conference on Emerging Technologies and Factory Automation ETFA 2005, vol. 2, pp , Catania, Italy, September J.R. Montoya Torres, S. Dauzère-Pérès, L. Vermariën, A simulation-optimization approach for vehicle control in automated semiconductor manufacturing, 17th European Simulation Symposium ESS2005, pp , Marseille, France, October C. Artigues, S. Dauzère-Pérès, A. Derreumaux, O. Sibille, C. Yugma, A batch optimization solver for diffusion area scheduling in semiconductor manufacturing, INCOM O6 (12th IFAC Symposium on Information Control Problems in Manufacturing), Saint-Etienne, France, May M. Boudia, S. Dauzère-Pérès, C. Prins, M.A.0. Louly, Integrated optimization of production and distribution for several products, 2006 IEEE International Conference on Service Systems and Service Management, 6 pages, Troyes, France, October M. Bureau, S. Dauzère-Pérès, Y. Mati, Scheduling challenges and approaches in semiconductor manufacturing, INCOM O6 (12th IFAC Symposium on Information Control Problems in Manufacturing), vol. 2 pp , Saint-Etienne, France, May F. Ramond, S. Dauzère-Pérès, D. De Almeida, Scheduling moves within railcar maintenance centers, INCOM O6 (12th IFAC Symposium on Information Control Problems in Manufacturing), Saint-Etienne, France, May Wolosewicz C., S. Dauzère-Pérès, R. Aggoune, A new approach for solving integrated planning and scheduling problem, INCOM O6 (12th IFAC Symposium on Information Control Problems in Manufacturing), vol. 3, pp , Saint-Etienne, France, May F. Ramond, D. De Almeida, S. Dauzère-Pérès, Enhanced operation scheduling within railcar maintenance centers, 7th World Congress on Railway Research, Montreal, Canada, June J.R. Montoya Torres, S. Dauzère-Pérès, L. Vermariën, A Consistent Approach for Vehicle Planning and Control in Large Unified Automated Material Handling Systems, IMHRC 2006 (9th International Material Handling Research Colloquium), Salt Lake City, Utah, USA, June N. Brahimi, S. Dauzère-Pérès, Capacitated Single Item Lot Sizing with Time Windows, Conference on Systems and Control, Marrakech, Morocco, May S. Azem, R. Aggoune, S. Dauzère-Pérès, A mathematical model for job shop scheduling with resource availability constraints, International Conference on Industrial Engineering and Systems Management IESM 07, Beijing, China, May-June M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, A consistent approach for simulating global and local scheduling, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2007), pp , Stresa, Italy, June C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Importance of Qualification Management for Wafer Fabs, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2007), pp , Stresa, Italy, June

8 32. C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Résolution d un problème intégré de planification et d ordonnancement, GI2007 (7ème Congrès international de génie industriel), sur CD, 10 pages, Trois Rivière, Quebec, Canada, June C. Yugma, R. Riffart, S. Dauzère-Pérès, P. Vialletelle, F. Buttin, A dispatcher simulator for a photolithography workshop, ASMC 2007 (18th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2007), pp , Stresa, Italy, June M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, An original approach for semiconductor manufacturing, INFORMS Simulation Society Research Workshop, pp , Fontainebleau, France, July N. Jedidi, P. Sallagoity, A. Roussy, S. Dauzère-Péres, J. Pinaton, Feed-forward Run to Run control for reduced Parametric transistor variation in CMOS logic 0.13µm technology, ISSM conference, Santa Clara, USA, October M. Bureau, S. Dauzère-Pérès, C. Yugma, L. Vermariën, J.-B. Maria, Simulation Results and Formalism for Global-local Scheduling in Semiconductor Manufacturing Facilities, WSC 2007 (Winter Simulation Conference 2007), pp , Washington D.C., USA, December S. Azem, R. Aggoune, S. Dauzère-Pérès, Disjunctive and time-indexed formulations for non-preemptive job shop scheduling with resource availability constraints, IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2007, Singapore, December C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, Flexibility models for semiconductor fabrication, MOSIM 08 (7ème Conférence Francophone de Modélisation et Simulation), vol. 1, pp , Paris, France, April J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën, Gestion optimisée des véhicules dans un large système de transport unifié pour la fabrication de semi-conducteurs, MOSIM 08 (7ème Conférence Francophone de Modélisation et Simulation), vol. 2, pp , Paris, France, April A. Sarac, N. Absi, S. Dauzère-Pérès, Analyse de l impact des technologies RFID sur le modèle du newsvendor avec des stocks erronés : cas de distributions uniformes, MOSIM 08 (7ème Conférence Francophone de Modélisation et Simulation), vol. 1, pp , Paris, France, April J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, L. Vermariën,Improved Vehicle Management for Large Unified AMHS in Semiconductor Manufacturing Facilities, IMHRC 2008 (10th International Material Handling Research Colloquium), Dortmund, Germany, May C. Yugma, S. Dauzère-Pérès, A. Derreumaux, O. Sibille, A Batch Optimization Sofware for diffusion area scheduling in semiconductor manufacturing, ASMC 2008 (19th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2008), pp , Boston, USA, May S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, L.M. Daufresne, P. Hofman, Utilisation des NTIC dans la gestion d un stock d échantillons biologiques: la simulation pour aider à la décision, GISEH 08 (Gestion et Ingénierie des SystEmes Hospitaliers), pp , Lausanne, Switzerland, September

9 44. S. Kedad-Sidhoum, C. Rodriguez-Getan, N. Absi, S. Dauzère-Pérès, Quality Service in Supply Chain Production Planning, International Symposium on Operational Research, , November 2008, Alger, Algeria. 45. S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, R. Collomp, P. Mallea, N. Mirfendereski, C. Chabannon, Estimating the impact of RFID technologies in healthcare applications: Perspectives using simulation, ICIS (International Conference on Information Systems) Ancillary meeting, 9 pages, Paris, France, December C.-F. Chien, S. Dauzère-Pérès, H. Ehm, J.W. Fowler, Z. Jiang, S. Krishnaswamy, L. Mönch, R. Uzsoy, Modeling and Analysis of Semiconductor Manufacturing in a Shrinking World: Challenges and Successes, MASM 2008 (4th International Conference on Modeling and Analysis of Semiconductor Manufacturing), in WSC 2008 (Winter Simulation Conference 2008), pp , Miami, USA, December C. Johnzen, S. Dauzère-Pérès, A. Derreumaux, P. Vialletelle, C. Yugma, Impact of Qualification Management on Scheduling in Semiconductor Manufacturing, MASM 2008 (4th International Conference on Modeling and Analysis of Semiconductor Manufacturing), in WSC 2008 (Winter Simulation Conference 2008), pp , Miami, USA, December A. Sarac, N. Absi, S. Dauzère-Pérès, A simulation approach to evaluate the impact of introducing RFID technologies in a three-level supply chain, WSC 2008 (Winter Simulation Conference 2008), pp , Miami, USA, December S. Housseman, N. Absi, S. Dauzère-Pérès, C. Chabannon, P. Hofman, Simulation as a decision support tool: Estimating the Impacts of using RFID technologies within Biobanks, HealthInf (International Conference on Health Informatics), pp , Porto, Portugal, January C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Optimizing Flexibility and Equipment Utilization through Qualification Management, ASMC 2009 (20th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference), in cooperation with ISSM, pp , Berlin, Germany, May B. Detienne, C. Yugma, S. Dauzère-Pérès, Scheduling Quality Tasks subject to a fixed Production Plan, MISTA 2009, pp , Dublin, Ireland, August S. Housseman, N. Absi, D. Feillet, S. Dauzère-Pérès, Impacts of Radio-Identification on Cryo-Conservation Centers Through Simulation, WSC 2009 (Winter Simulation Conference 2009), pp , Austin (Texas), USA, December J.-E. Kiba, S. Dauzère-Pérès, C. Yugma, G. Lamiable, Simulation of a Full 300mm Semiconductor Manufacturing Plant with Material Handling Constraints, WSC 2009 (Winter Simulation Conference 2009), pp , Austin (Texas), USA, December L. Mönch, J. W. Fowler, S. Dauzère-Pérès, S. J. Mason, O. Rose, Scheduling Semiconductor Manufacturing Operations: Problems, Solution Techniques, and Future Challenges, MISTA 2009, pp , Dublin, Ireland, August S. Dauzère-Pérès, L. Mönch, Minimizing the Weighted Number of Tardy Jobs on a Single Batch Processing Machine, 2010 IIE Industrial Engineering Research Conference (IERC), 6 pages, Cancun, Mexico, June

10 56. S. Dauzère-Pérès, J.-L. Rouveyrol, C. Yugma, P. Vialletelle, A Smart Sampling Algorithm to Minimize Risk Dynamically, ASMC 2010 (21th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2010), in cooperation with ISSM, pp , San Francisco, USA, July C. Jimenez, S. Dauzère-Pérès, C. Feuillebois, E. Pauly, Integration of RFID technologies in Helicopter Maintenance Processes, ERF 2010 (European Rotorcraft Forum), 8 pages, Paris, France, September A. Obeid, S. Dauzère-Pérès, C. Yugma, A. Ferreira, Scheduling Job Families on Non- Identical Parallel Machines under Run-To-Run Control Constraints, 12th International Conference on Project Management and Scheduling (PMS 10), pp , Tours, France, April E. Zehendner, G. L. Rodriguez-Verjan, N. Absi, S. Dauzère-Pérès, D. Feillet, Optimizing and Simulating Loading/Discharging Resource Allocation in a Multimodal Container Port Terminal, 1st International Conference on Logistics and Maritime Systems (LOGMS 2010), 8 pages, Busan, Korea, September F. Benhizia, D. De Almeida, S. Dauzère-Pérès, Integrated Planning of Railway Transportation Resources, 4th International Seminar on Railway Operations Modelling and Analysis (RAILROME 2011), 9 pages, Rome, Italy, February J. Nduhura Munga, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Optimized Management of Excursion in Semiconductor Manufacturing, MASM 2011 (7th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2011 (Winter Simulation Conference 2011), pp , Phoenix, Arizona, USA, December A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling Job Families on Non-Identical Parallel Machines time constraints, MASM 2011 (7th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2011 (Winter Simulation Conference 2011), pp , Phoenix, Arizona, USA, December G.L. Rodriguez Verjan, S. Dauzère-Pérès, J. Pinaton, Impact of Control Plan on Tool Risk Management: A Simulation Study in Semiconductor Manufacturing, MASM 2011 (7th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2011 (Winter Simulation Conference 2011), pp , Phoenix, Arizona, USA, December C. Yugma, Dauzère-Pérès, J.L. Rouveyrol, P. Vialletelle, J. Pinaton, C. Relliaud, A Smart Sampling Scheduling and Skipping Simulator and it Evaluation on Real Data Sets, MASM 2011 (7th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2011 (Winter Simulation Conference 2011), pp , Phoenix, Arizona, USA, December E. Zehendner, N. Absi, S. Dauzère-Pérès, D. Feillet, Solving the Resource Allocation Problem in a Multimodal Container Terminal as a Network Flow Problem, Computational Logistics, Lecture Notes in Computer Science, 2011, Volume 6971/2011, ICCL International Conference on Computational Logistics, pp , Hamburg, Germany, September E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, New Integrated Approach for Solving Multi-Level Lot-Sizing and Scheduling Problems, MOSIM 12 (9me Confrence Francophone de Modlisation et Simulation), 10 pages, Bordeaux, France, April

11 67. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, An Integrated Approach for Lot- Sizing and Detailed Scheduling in Job-Shops, ILS 2012 (4th International Conference on Information Systems, Logistics and Supply Chain), 9 pages, Quebec, Canada, August A. Obeid, S. Dauzère-Pérès, C. Yugma, Scheduling on Parallel Machines with Time Constraints and Equipment Health Factors, CASE 2012 (8th IEEE International Conference on Automation Science and Engineering), Seoul, Korea, August G. Rodriguez-Verjan, E. Tartiere, J. Pinaton, S. Dauzère-Pérès, A. Thieullen, Dispatching of Lots to Dynamically Reduce the Wafer at Risk in Semiconductor Manufacturing, CASE 2012 (8th IEEE International Conference on Automation Science and Engineering), Seoul, Korea, August J. Nduhura Munga, S. Dauzère-Pérès, P. Vialletelle, C. Yugma, Industrial implementation of a dynamic sampling algorithm in semiconductor manufacturing: Approach and challenges, MASM 2012 (8th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2012 (Winter Simulation Conference 2012), 9 pages, Berlin, Germany, December G. Rodriguez-Verjan, S. Dauzère-Pérès, J. Pinaton, A Mathematical Model for Estimating Defectivity Capacity with a Dynamic Control Strategy, MASM 2012 (8th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2012 (Winter Simulation Conference 2012), 9 pages, Berlin, Germany, December M. Rowshannahad, S. Dauzère-Pérès, B. Cassini, Qualification Management and Its Impact on Capacity Optimization, ASMC 2013 (24th Annual IEEE/SEMI Advanced Semiconductor Manufacturing Conference 2013), pp , Saratoga Springs, NY, USA, May F. Benhizia, S. Dauzère-Pérès, D. De Almeida, O. Guyon, A Lagrangian heuristic for a real-life integrated planning problem of railway transportation resources, 5th International Seminar on Railway Operations Modelling and Analysis (RAILCOPENHAGEN 2013), 13 pages, Copenhagen, Denmark, May E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Analysis and improvements of a solving procedure for the integration of lot-sizing and scheduling decisions, IESM 2013 (2013 International Conference on Industrial Engineering and Systems Management), 8 pages, Rabat, Marocco, october M. Rowshannahad, S. Dauzère-Pérès, Qualification Management and Its Impact on Capacity Optimization, MASM 2013 (9th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013), pp , Washington D.C., USA, December Winner of the Best Applied Paper. 76. G. Rodriguez-Verjan, S. Dauzère-Pérès, S. Housseman, J. Pinaton, Skipping Algorithms for Defect Inspection Using a Dynamic Control Strategy in Semiconductor Manufacturing, MASM 2013 (9th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013), pp , Washington D.C., USA, December A. Ben Chaabane, S. Dauzère-Pérès, C. Yugma, L. Rullière, G. Lamiable, Analyzing the Impact of Key Parameters of Vehicle Management Policies in a Unified AMHS, MASM 2013 (9th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013), pp , Washington D.C., USA, December

12 78. A. Ben Amira, G. Lepelletier, P. Vialletelle, S. Dauzère-Pérès, C. Yugma, P. Lalevée, Modeling Complex Processability Constraints in High-Mix Semiconductor Manufacturing, MASM 2013 (9th International Conference on Modeling and Analysis of Semiconductor Manufacturing), included in WSC 2013 (Winter Simulation Conference 2013), pp , Washington D.C., USA, December NATIONAL CONFERENCES (with proceedings) 1. W. Roux, S. Dauzère-Pérès, J.B. Lasserre, J. Paulli, Modélisation Intégrée d un problème d ordonnancement multi-ressources avec affectation, Journées d Etudes Affectation et Ordonnancement du Groupe de Recherche Automatique, Tours, September S. Dauzère-Pérès, M. Sevaux, Various Mathematical Programming Formulations for a General One Machine Sequencing Problem, 4ième Journée Nationale sur la Résolution Pratique des Problèmes NP-Complets, JNPC 98, Nantes, May S. Dauzère-Pérès, C. Pavageau, Différencier les durées opératoires dans une approche intégrée pour l ordonnancement multi-ressources, 3ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 01, Troyes, April N. Brahimi, S. Dauzère-Pérès, C. Guéret, Ordonnancement de tâches dans un centre de dialyse, 1ière Conférence Francophone en Gestion et Ingénierie des Systèmes Hospitaliers, GISEH 03, Lyon, January N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A. Nordli. Etat de l art sur les problèmes de dimensionnement des lots avec contraintes de capacité, 4ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 03, Toulouse, France, April N. Brahimi, S. Dauzère-Pérès, N.M. Najid. Problème de dimensionnement de lots avec fenêtres de temps et temps de préparation, 5ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 04, pp , Nantes, France, September I. Essafi, S. Dauzère-Pérès, C. Lahlou. Single machine customer order scheduling problem, 5ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 04, pp , Nantes, France, September S. Martinez, S. Dauzère-Pérès, C. Guéret, N. Sauer. Modèle optimal pour le Flow-Shop hybride à deux étages avec une nouvelle contrainte de blocage, 5ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 04, pp , Nantes, France, September F. Ramond, D. De Almeida, S. Dauzère-Pérès, H. Sherali. Conception de roulements de personnel répondant à des besoins cycliques, 5ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 04, pp , Nantes, France, September Wolosewicz C., S. Dauzère-Pérès, R. Aggoune. Modélisation et résolution d un problème général de planification et ordonnancement intégrés, 6ième Conférence Francophone de MOdélisation et SIMulation, MOSIM 06, vol. 2, pp , Rabat, Maroc, April INTERNATIONAL CONFERENCES (without proceedings) 1. S. Dauzère-Pérès, J.B. Lasserre, A Decomposition Approach for Job-Shop Planning and Scheduling Problems. - Optimization Days 1991, Montréal, Canada, May th European Conference on Operational Research, Aix-la-Chapelle, Allemagne, July

13 2. S. Dauzère-Pérès, J.B. Lasserre, An Iterative Procedure for Lot-Streaming in Job-Shop Scheduling. 36th ORSA/TIMS Joint National Meeting, Phoenix, USA, October S. Dauzère-Pérès, S.B. Gershwin, Finding Switching Times in Continuous-Time Production Planning. 37th ORSA/TIMS Joint National Meeting, Boston, USA, April S. Dauzère-Pérès, S.B. Gershwin, Continuous-Time Production Planning. PROSEM 95, Production Planning and Control: Models and Applications, Molde, Norway, May S. Dauzère-Pérès, J.B. Lasserre, A New Mixed-Integer Formulation of the Flow-Shop Sequencing Problem. Second Workshop on Models and Algorithms for Planning and Scheduling Problems, Wernigerode, Germany, May S. Dauzère-Pérès, Some New Results on Minimizing Late Jobs in One-Machine Scheduling. Third Workshop on Models and Algorithms for Planning and Scheduling Problems, Cambridge, United Kingdom, April W. Roux, S. Dauzère-Pérès, J.B. Lasserre, An Integrated Model for Planning and Scheduling. Production and Operations Management 97, POM97, Miami Beach, USA, April S. Dauzère-Pérès, M. Sevaux, Modeling and Solving Continuous-Time Production Planning Problems. Production and Operations Management 97, POM97, Miami Beach, USA, April S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minmize the Weighted Number of Late Jobs in One Machine Sequencing with Release Dates. Combinatorial Optimization 98, CO98, Bruxelles, Belgium, April S. Dauzère-Pérès, M. Sevaux, On Minimizing Late Jobs in Single Machine Scheduling. INFORMS/CORS Joint Meeting, Montreal, Canada, April S. Dauzère-Pérès, W. Roux, J.B. Lasserre, Minimizing makespan in multi-resource shop scheduling. INFORMS/CORS Joint Meeting, Montreal, Canada, April S. Dauzère-Pérès, M. Sevaux, Using Lagrangean Relaxation to Minimize the (Weighted) Number of Late Jobs. Contribution nationale à la 15th triennal conference of the Inter. Federation of the Oper. Res. Societies, IFORS 99, Beijing, China, August S. Dauzère-Pérès, C. Pavageau, N. Sauer, IP for modeling and solving an industrial hybrid flow-shop scheduling problem with blocking. 17th International Symposium on Mathematical Programming, ISMP 2000, Atlanta, USA, August S. Dauzère-Pérès, C. Lahlou, Single machine scheduling with time window dependent processing times. Combinatorial Optimization 2002, CO 02, Paris, France, April A. Nordli, S. Dauzère-Pérès, N.M. Najid, Uncapacitated Lot-Sizing with Time Windows. INFORMS Conference, San Jose, USA, November N. Brahimi, S. Dauzère-Pérès, N.M. Najid, A Lagrangian relaxation heuristic for the Capacited Single Item Lot Sizing Problem with Time Windows Sixth Workshop on Models and Algorithms for Planning and Scheduling Problems, MAPSP 03, Aussois, France, April I. Essafi, S. Dauzère-Pérès, C. Lahlou, Single machine customer order scheduling to minimize total weighted late orders. Combinatorial Optimization 2004, CO 04, Lancaster, United Kingdom, March

14 18. N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Capacitated Lot Sizing with Time Windows and Setup Times 20th European Conference on Operational Research, Rhodes, Greece, July A. Nordli, N. Brahimi, S. Dauzère-Pérès, N.M. Najid, Lot-sizing problems with time windows TraLog - Transportation and Logistics, Molde, Norway, August I. Essafi, S. Dauzère-Pérès, C. Lahlou, Two local search approaches for minimizing total weighted tardiness in a job shop with customer orders, Seventh Workshop on Models and Algorithms for Planning and Scheduling Problems (MAPSP2005), Sienne, Italy, June Wolosewicz C., S. Dauzère-Pérès, R. Aggoune, Study of an integrated model for production planning and scheduling in the supply chain, Seventh Workshop on Models and Algorithms for Planning and Scheduling Problems (MAPSP2005), Sienne, Italy, June S. Dauzère-Pérès, A. Nordli, U. Koester, G. Teisklub, Omya Hustadmarmor: Optimizing the Supply Chain of Calcium Carbonate Slurry to the European Paper Making Industry, présentation à la 2006 Franz Edelman Award Competition, 2006 INFORMS Confererence on OR/MS Practice, Miami, Florida, USA, May Johnzén C., S. Dauzère-Pérès, C. Yugma, P. Vialletelle, Importance of Qualification Management for Wafer Fabs, Third ISMI Symposium on Manufacturing Effectiveness, poster, Austin, Texas, USA, October S. Azem, R. Aggoune, S. Dauzère-Pérès, A general model for job shop scheduling with limited machine availability, 21st Annual Conference of the Belgian Operational Research Society ORBEL21, Luxembourg, Luxembourg, January N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Lot-sizing Problems with Time Windows and Shortages,. IFORS 2008 (18th Triennial Conference of the International Federation of Operational Research Societies), Sandton, South Africa, July N. Absi, B. Detienne, S. Dauzère-Pérès, Heuristics for the multi-item capacitated lot-sizing with lost sales, EURO Conference 2009, Bonn, Germany, July N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Lot-sizing with carbon emission constraints, International Workshop on Lot Sizing IWLS 2010, pp , August 2010, Gardanne, France. 28. N. Brahimi, N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, A two-level lot-sizing problem with bounded inventory, International Workshop on Lot Sizing IWLS 2010, pp , August 2010, Gardanne, France. 29. A. Obeid, S. Dauzère-Pérès, C. Yugma, A. Ferreira, Simulated Annealing for Scheduling Job Families on Non-Identical Parallel Machines with Information Constraints, EU/ME 2010, Lorient, France, June N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, Solving green lot-sizing problems, International Workshop on Lot Sizing IWLS 2011, August 2011, Istanbul, Turkey. 31. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Improvements of an Integrated Approach for Lot Sizing and Detailed Scheduling, International Workshop on Lot Sizing IWLS 2011, August 2011, Istanbul, Turkey. 14

15 32. N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, B. Penz, C. Rapine, The Single-Item Green Lot-Sizing Problem with Fixed Carbon Emissions, International Workshop on Lot Sizing IWLS 2012, August 2012, Rotterdam, The Netherlands. 33. N. Absi, C. Archetti, S. Dauzère-Pérès, D. Feillet, An iterative two-phase heuristic approach for the Production Routing Problem, International Workshop on Lot Sizing IWLS 2012, August 2012, Rotterdam, The Netherlands. 34. E.D. Gomez Urrutia, R. Aggoune, S. Dauzère-Pérès, Improvements of an Integrated Approach for Lot Sizing and Detailed Scheduling, International Workshop on Lot Sizing IWLS 2012, August 2012, Rotterdam, The Netherlands. NATIONAL CONFERENCES (without proceedings) 1. S. Dauzère-Pérès, Formulations en PLNE du problème général d ordonnancement à une machine. Rencontres sur les problèmes linéaires en nombres entiers, INRIA-Rocquencourt, France, October S. Dauzère-Pérès, M. Sevaux, Un algorithme génétique pour minimiser le nombre pondéré de jobs en retard sur une machine. 3ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2000, Nantes, France, January S. Dauzère-Pérès, C. Pavageau, N. Sauer, Modélisation et résolution d un problème réel d ordonnancement avec contraintes de blocage. 3ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2000, Nantes, France, January S. Dauzère-Pérès, C. Pavageau, N. Sauer, Mathematical programming for modeling and solving a practical hybrid flow-shop scheduling problem with blocking. Ecole d été Ordonnancement Déterministe pour l Informatique et la Production, ODIP 2000, Aussois, France, September S. Dauzère-Pérès, C. Guéret, M. Galvis, A Column Generation Approach for a Two-Stage Hybrid Flow-shop Problem. 4ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2002, Paris, France, February S. Dauzère-Pérès, C. Guéret, S. Martinez, Y. Mati, N. Sauer, Complexité de problèmes d ordonnancement de type flow-shop avec de nouvelles contraintes de blocage. 5ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2003, Avignon, France, February V. Laredo, S. Dauzère-Pérès, Optimisation des livraisons de Semi-conducteurs. 5ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2003, Avignon, France, February F. Ramond, D. De Almeida, S. Dauzère-Pérès, Planification des manoeuvres sur les chantiers de maintenance des trains, 6ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2005, Tours, February C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Etude d un modèle intégré de planification et ordonnancement de la chane logistique, 6ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2005, Tours, February C. Wolosewicz, S. Dauzère-Pérès, R. Aggoune, Modélisation et résolution du problème d intégration de planification et ordonnancement, 7ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2006, Lille, February

16 11. C. Johnzen, S. Dauzère-Pérès, P. Vialletelle, Flexibility Measures for Machine Qualification Management, 8ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2007 / FRANCORO V, Grenoble, February N. Jedidi, A. Roussy, P. Sallagoity, S. Dauzère-Pérès, J. Pinaton, Interprocess Run-to- Run Controller for reduced Parametric Transistor Variation in CMOS Logic 0.13µm Technology, The 10th Technical and Scientific Meeting of ARCSIS Yield and reliability: Challenges and Process Improvements, STUniversity, Fuveau, December N. Absi, S. Dauzère-Pérès, S. Kedad-Sidhoum, Problème de lot-sizing à capacité finie avec fentres de temps et ruptures sur les demandes, 9ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2008, Clermont-Ferrand, February C. Yugma, S. Dauzère-Pérès, A. Derreumaux, T. Philippi, C. Quarta, Ordonnancement de lots dans une zone de photolithographie pour la fabrication de semi-conducteurs, 9ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2008, Clermont-Ferrand, February B. Detienne, C. Yugma, A. Ferreira, S. Dauzère-Pérès, Integration of Scheduling decisions and Advanced Process Control in Semiconductor Manufacturing, The 11th Technical and Scientific Meeting of ARCSIS Wafer Manufacturing Process Control: methods, applications and new challenges, Poster, STUniversity, Fuveau, November B. Detienne, C. Yugma, S. Dauzère-Pérès, Minimisation du retard des mesures dans la fabrication des semi-conducteurs, 10ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2008, Nancy, February S. Kedad-Sidhoum, C. Rodriguez-Getan, N. Absi, S. Dauzère-Pérès, Problème de lot-sizing à capacité finie avec fentres de temps et contraintes de services, 10ième congrès de la société Française de Recherche Opérationnelle et d Aide à la Décision, ROADEF 2008, Nancy, February